City Of Pasig Tender

Description Invitation To Bid For Supply And Delivery Of Various Electronics And Hardware Supplies And Equipment – Pcch 1. The City Government Of Pasig, Through The Executive Budget Cy 2024 Intends To Apply The Sum One Million Seven Hundred Forty-four Thousand Ninety-five Pesos Only (php1,744,095.00) Being The Abc To Payments Under The Contract For The Supply And Delivery Of Various Electronics And Hardware Supplies And Equipment – Pcch. Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. Item No. Description Approved Budget For The Contract (php) Lot 1 – Electronics Supply, Tools And Equipments 1 Microphone 352,800.00 2 Microphone Cable Stereo 3 Xlr Female Connector 4 Xlr Male Connector 5 Pl Jack, Stereo 6 Projector 4000ansi Lumen, 20,000;1 Contrast Ratio 7 Hdmi Cable 8 Dual Wireless Professional Microphone, Rechargeable 9 Battery Charger, Aa, Aaa, 8-slots, With Digital Display 10 Battery Charger, 9 Volts. 4 Slots Display, Nicd, Nimh, Li-ion 11 Rechargeable Battery, Aa, 2800mah 12 Rechargeable Battery, Aaa, 1300mah 13 Rechargeable Battery, 9 Volts, 1000mah Or Higher, Li-ion 14 Professional Audio Mixer 15 Handheld Two-way Ratio 16 Dual Band Uhf/vhf Base Radio 17 Dual Band High Gain Directional Radio Outdoor Antenna 18 Coaxial Cable, Rg6 19 Professional Powered 2-way Speaker Lot 2 – Electrical Materials 20 3 Gang Switch With Cover Plate 703,120.00 21 Electrical Vinyl Tape 22 Led Round Panel Light, 12w (led White), 6" Diameter, 110 Lumens/watt, Approved By Bureau Product Standard Or Ul Listed Standard 23 Led Round Panel Light, 18w (led White), 8" Diameter, 110 Lumens/watt, Approved By Bureau Product Standard Or Ul Listed Standard 24 Led Round Panel Lights, 6w (white), 3" Diameter, 110 Lumens/watt, Approved By Bureau Product Standard Or Ul Listed Standard 25 Led Round Panel Lights, 6w (yellow), 3" Diameter, 110 Lumens/watt, Approved By Bureau Product Standard Or Ul Listed Standard 26 Floodlight 27 Royal Cord, 2c, 3.5mm² 28 Royal Cord, 2c, 2.0mm² 29 Plastic Moulding 5/8" X 8 Ft/length 30 Plastic Moulding 3/4" X 8 Ft/length 31 Circuit Breaker, 20at, 1p, Mccb, 10kalc, Bolt-on (same With Existing) 32 Circuit Breaker, 30at, 1p, Mccb, 10kalc, Bolt-on (same With Existing) 33 Circuit Breaker, 40at, 1p, Mccb, 10kalc, Bolt-on (same With Existing) 34 Led Lamp Tube, 18 Watts, T5, 1200mm/pc (daylight) 35 Cove Light Fixture, Led Lamp Tube, 18watts, T5, 1200mm/pc (daylight) 36 Led Lamp Tube, 9watts, T8, 600mm/pc (daylight) 110lumens Per Watt Of Higher, Single End Power Supply 37 Led Lamp Tube, 18watts, T8, 1200mm/pc (daylight) 110lumens Per Watt Or Higher, Single End Power Supply 38 2.0mm² Thhn Stranded Wire 39 3.5mm² Thhn Stranded Wire 40 5.5mm² Thhn Stranded Wire 41 8.0mm² Thhn Stranded Wire 42 14.00mm² Thhn Stranded Wire 43 22.00mm² Thhn Stranded Wire 44 30.00mm² Thhn Stranded Wire 45 1.25mm² Tf Wire 46 1.25mm² Flat Cord 47 Circuit Breaker, 75at, 3p, Mccb, Bolt-on 48 Circuit Breaker, 100at, 3p, Mccb, Bolt-on 49 Circuit Breaker, 150at, 3p, Mccb, Bolt-on 50 Tox #6 With Metal Screw #8 51 Utility Box (4" X 2") 52 Emergency Lights. Led Twin Head 53 Fiber Glass A-ladder Lot 3 – Mechanical Materials 54 Aircon Fins Cleaner 84,000.00 55 Duct Tape (48mm X 25m) 56 Refrigerant Freon R32 (refill), 13.6kg/tank 57 Refrigerant Freon R410a (refill), 11.3kg/tank 58 Rubber Foam, Insulation Tape 59 Magnetic Contactor, Sc-5-1, 380v-400v 60 Magnetic Contactor, Sc-05, 380v-400v 61 Thermal Overload Relay (tr-5-1n/3) 62 Thermal Overload Relay (tr-5-on/3) Lot 4 – Sanitary Materials And Equipment 63 Angle Valve 1/2" 147,740.00 64 Bidet Set 65 Lavatory P-trap 66 Lye (9 Oz.) 67 Pvc Adapter 1/2" (eslon Blue), Male, Threaded 68 Pvc Adapter 1/2" (eslon Blue), Female, Threaded 69 Pvc Coupling 1/2" (eslon Blue) 70 Cleaning Rags, White (round) 71 Service Water Faucet (bronze), 1/2" 72 Acrylic Sealant (300ml) 73 Silicone Sealant Gun 74 Pvc Solvent Cement 100cc 75 Service Water Faucet Ordinary 4" 76 Teplon Tape (19mm X 10m) 77 Electrical Drain Declogging / Cleaning Machine 78 Wood Handle Plunger Force Cup (23" X 4" X 5") Lot 5 – Carpentry And Painting Materials 79 Door Knob (ordinary), Stainless Steel, Heavy Duty 35,075.00 80 Flat Latex White Paint (1 Gallon) 81 Flat Latex White Paint (semi-gloss) (1 Gallon) 82 Metal Furring 0.5mm Thk. By 6 Meters 83 Paint Roller Baby With Handle And Paint Tray 84 Paint Thinner (1 Gallon) 85 G.i. Pipe, 1/2" X 6 Meters 86 G.i. Pipe, 3/4" X 6 Meters Lot 6 – Other Materials 87 Adhesive (instant Glue 10g) 92,210.00 88 Black Screw 1", 100pcs/box 89 Black Screw 2'', 100pcs/box 90 Blind Rivet 1/8 X 1/2 91 Blind Rivet 3/16 X 1/2 92 Blind Rivet 5/32 X 1/2 93 Cable Connector (male/female) Medium Size 94 Cable Ties (5mm X 300mm), 100pcs/pack 95 Contact Cement (350cc) 96 Cotton Gloves 97 Cutting Wheels (105 X 1.2 X 16mm) (4" X 3/64" X 5/8") 98 Diamond Disc (d105 X 1.2 X 16mm) 99 Double Sided Tape 1", Heavy Duty 100 Grinding Wheels (4" X 1/4" X 5/8" X 100mm) 101 Gun Tacker, Heavy Duty 102 Gun Tacker Stapler 1/2" 103 Gun Tacker Staple 3/8" 104 Hacksaw Blade (18tpi) 105 Motor Oil (4 In 1) (120ml) 106 Penetrating Oil (333ml) 107 Pressure Washer 108 Steel Alloy Saw Blade (30 Teeth 4 1/2") 109 Switching Adaptor 110 Stanchion Post 111 Welding Rod (ordinary) 112 Welding Rod 3/32 (stainless) 113 Wet And Dry Sealant 200ml 114 Sand Paper, Waterproof 200grit 115 Sand Paper, Waterproof 400grit 116 Sand Paper, Waterproof 600grit 117 Sand Paper, Waterproof 800grit 118 Abralon Sanding Disc Pad, 6" Diameter, 500grit 119 Abralon Sanding Disc Pad, 6" Diameter, 1000grit 120 Abralon Sanding Disc Pad, 6" Diameter, 1500grit 121 Cement, 50 Kilos 122 Sand (bistay) 123 Rubberized Paint - Chrome Green 124 Rubberized Paint - Yellow 125 Epoxy Metal Primer (gray) Lot 7 – Electrical Tools 126 Electrician Cable Skinning Knife, 59,700.00 127 Test Light 128 Insulated High Voltage Screw Driver Set 129 Electrician Plier 130 Electrician Long Nose Plier 131 Electrician Side Cutter 132 Electrician Leather Holster Lot 8 – Tools And Testing Equipments Hvac 133 Manifold Gauge R410 57,250.00 134 Manifold Gauge R32 135 R410 / R 32 Leak Detector 136 High Intensity Mapp Gas Torch Head 137 Mapp Gas, 14oz 138 Silver Rod 139 Tube Cutter 140 Flaring Tool Set 141 Digital Hvac Multimeter Tester 142 Pressure Washer Set, Portable, Heavy Duty, With Short Spray Gun 143 Aero Tape Foam Insulation, 30ft Per Roll 144 Digital Caliper, Metal, 150mm, Heavy Duty 145 Wash Bag, Medium, With Hose 146 Wash Bag, Large, With Hose Lot 9 – Electrical Testing Equipment 147 High End Digital Multimeter, Tester 212,200.00 148 Phase Sequence And Motor Rotation Tester 149 Handheld Thermal Imager, 150 Power And Harmonics Clamp Meter 151 Earth Ground Resistance Tester 152 Digital Clamp Meter 153 Hydraulic Crimping Tools 154 Flashlight, Led 155 Headlamp, Led 156 Rechargeable Battery Aaa, 1300mah, Nimh Grand Total 1,744,095.00 2. The City Government Of Pasig Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required 45 Calendar Days. Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee Through Its Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours, Monday To Friday, From 8:00 A.m. To 5 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On 20 March 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Presented In Person. Approved Budget For The Contract Cost Of Bidding Documents (php) 500,000 And Below 500.00 More Than 500,000 Up To 1 Million 1,000.00 More Than 1 Million Up To 5 Million 5,000.00 More Than 5 Million Up To 10 Million 10,000.00 More Than 10 Million Up To 50 Million 25,000.00 More Than 50 Million Up To 500 Million 50,000.00 Note: For Lot Procurement, The Maximum Fee For The Bidding Documents For Each Lot Shall Be Based On Its Abc, In Accordance With The Guidelines Issued By The Gppb; Provided That The Total Fees For The Bidding Documents Of All Lots Shall Not Exceed The Maximum Fee Prescribed In The Guidelines For The Sum Of The Abc Of All Lots. 6. The City Government Of Pasig Will Hold A Pre-bid Conference On 27 March 2024, 1:30 P.m. At 7th Floor Meeting Room, Pasig City Hall, Caruncho Avenue, San Nicolas, Pasig City, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Procurement Management Office Through Manual Submission At The Office Address Indicated Below, On Or Before 08 April 2024, 9:30 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 08 April 2024, 10:00 A.m. At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Each Bidder Shall Submit One (1) Sealed Mother Envelope Containing: 1. Original (sealed And Labeled) 1.1 Company Profile Folder 1.2 Original Technical Component And Original Financial Components (hard Copy, In 2 Separate Sealed Envelopes) And 1.3 One (1) Usb Flash Drive Containing 1.3.1 Scanned Documents (original Technical And Original Financial Components) 1.3.2 Excel File Of The Price Schedule 2. Copy 1 (sealed And Labeled) 2.1 One (1) Usb Flash Drive Sealed And Labeled As “copy 1” Containing Scanned Documents Of Technical And Financial Components Bidders Shall Bear All Costs Associated With The Preparation And Submission Of Their Bids, And The City Government Of Pasig Will In No Case, Be Responsible Or Liable For Those Costs, Regardless Of The Conduct Or Outcome Of The Bidding Process. Bidders Should Note That The City Government Of Pasig Will Only Accept Bids From Those That Have Paid The Applicable Fee For The Bidding Documents. In Accordance With Government Procurement Policy Board (gppb) Circular 06-2005 - Tie-breaking Method, The Bids And Awards Committee (bac) Shall Use A Non-discretionary And Non- Discriminatory Measure Based On Sheer Luck Or Chance, Which Is “draw Lots,” In The Event That Two (2) Or More Bidders Have Been Post-qualified And Determined As The Bidder Having The Lowest Calculated Responsive Bid (lcrb) To Determine The Final Bidder Having The Lcrb, Based On The Following Procedures: A) In Alphabetical Order, The Bidders Shall Pick One Rolled Paper. B) The Lucky Bidder Who Would Pick The Paper With A “congratulations” Remark Shall Be Declared As The Final Bidder Having The Lcrb And Recommended For Award Of The Contract. 11. The City Government Of Pasig Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Bea Therese P. Villanueva Procurement Management Office Caruncho Avenue, Pasig City Bidsandawards@pasigcity.gov.ph (02) 8643-1111 Local 1461 Or 1462 Pasigcity.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Https://notices.philgeps.gov.ph 20 March 2024 Sgd Atty. Josephine C. Lati-bagaoisan Bac Chairperson