City Of Malaybalay Tender

Description Lot 1 1 Unit Multi-crop Tthresher Technical Specifications: 1. Power Required: Water Cooled Diesel Engine, 12-12.5hp 2. Usage/application: Multi-crop Threshing 3. Category: Thresher 4. Materials: Steel/iron 5. Main Frame: A Bar 5mm X 1 ½, A Bar 5mm X 1 6. Sliding: Bi Plate # 18 (1.2mm) 7. Threshing Cylinder Cover & Cover Frame: Bi Plate #14 (2.0mm),flat Bar 5mm X 1 ¼ , Flat Bar 5mm X 1 ¾ 8. Threshing Cylinder Shaft Main: 1 ¼ 9. Peg Tooth: Flat Bar8.5mm X 1 ¼, Plain Bar 16mm 10. Blower Shaft: 1” Dia. 11. Blower Housing Bi Plate # 18 (1.2mm) 12. Feed Tray Bi Plate #18 (1.2mm) A Bar 4mmx1” 13. Screen/sieve Bolted Wire # 16x1/2 14. Cart Gi Pipe 2 ½” Dia. Schedule 40 15. Beam: A Bar 4mm X 1” 16. Tire: #14 17. Automation Grade: Automatic 18. Threshing Capacity:3000-5000 Kg/hr 19. Additional Requirements: With Operator’s Instruction Manual With Basic Tools Such As Three (3) Pieces Open Wrenches; One (1) Piece Each Of Philips And Flat Screw Driver, One (1) Piece Adjustable Wrench 12”; 1 Piece Vise Grip 10” With Amtec Test Report On Agricultural Machinery-multi Purpose Thresher Registered Of Ownership Of Multi-crop Thresher Thru Cmo-abe Division Unit Should Be Labeled: Two (2) Pieces Reflectorized/ Laminated Lgu-malaybalay City Sticker(see Attached Specification) Availability Of The Sales Services (service Center And Mechanics/ Technician Within Region 10 -services Of Mechanic/technical Personnel Are Free Of Charge For Replacing Parts Under Warranty To Put The Unit In Running Condition During Warranty Period. -repair Of Defective Units And Provision Of Other After Sales Services Shall Be Undertaken Within 5 Working Days Upon Receipt Of Complaints. Test Run Id Required -to Be Scheduled With The Presence Of A Test Engineer Of Abed And The Supplier With Their Technician. -materials To Be Provided By The Supplier To Test Run Purposes Minimum Of 1 Year Warrant -manufacturer/distributor/dealer Shall Issue A Warranty Certificate To The Buyer. Warranty Against Defective Materials And Workmanship Shall Be Provided For Parts And Services Except For Normal Wear And Tear Of Expandable Or Consumables Maintenance Parts Provided Services On Repair After Warranty At Reasonable Cost. Lot 2 2 Unit Floating Tiller-turtle Type (100,000.00/unit) Technical Specifications: 1. Primeover: A. Rated Power: Minimum, 6.71 Kw, (9hp) B. 8hp Diesel Engine (air-cooled), Not Made In China C. Continuous Power: Minimum 80% Or Rated Power D. Fuel Consumption At Continuous Power: Maximum 350g/kwh 2. Peak Transmission Efficiency: Minimum 80% 3. Forward Speed Range: 2.5 Kph To 4 Kph 4. Width Of Rotary Tilling Wheel: Minimum 1.0m (rotary Tiller- 2” X ¼” Flat Bar) 5. Wheel Spikes Flat Bar ¼” X ½” 6. Threshing Cylinder Shaft Main Flat Bar ¼ X ½” 7. Body (ms Plate) A. #14 (2.0mm) Thickness-concave Bullet Type, B. #16 (1.50mm) Thickness-fender C. #18 (1.2mm) Thickness-siding 8. Handle Bar (gi Pipe Schedule 40) 1” Dia. 9. Additional Requirements: With Operator’s Instruction Manual With Basic Tools Such As Three (3) Pieces Open Wrenches; One (1) Piece Each Of Philips And Flat Screw Driver, One (1) Piece Adjustable Wrench 12”; 1 Piece Vise Grip 10” With Amtec Test Report On Agricultural Machinery-rotary Tiller Registered Of Ownership Of Multi-crop Thresher Thru Cmo-abe Division Unit Should Be Labeled: Two (2) Pieces Reflectorized/ Laminated Lgu-malaybalay City Sticker(see Attached Specification) Availability Of The Sales Services (service Center And Mechanics/ Technician Within Region 10 -services Of Mechanic/technical Personnel Are Free Of Charge For Replacing Parts Under Warranty To Put The Unit In Running Condition During Warranty Period. -repair Of Defective Units And Provision Of Other After Sales Services Shall Be Undertaken Within 5 Working Days Upon Receipt Of Complaints. Test Run Id Required -to Be Scheduled With The Presence Of A Test Engineer Of Abed And The Supplier With Their Technician. -materials To Be Provided By The Supplier To Test Run Purposes Minimum Of 1 Year Warrant -manufacturer/distributor/dealer Shall Issue A Warranty Certificate To The Buyer. Warranty Against Defective Materials And Workmanship Shall Be Provided For Parts And Services Except For Normal Wear And Tear Of Expandable Or Consumables Maintenance Parts Provided Services On Repair After Warranty At Reasonable Cost. Lot 3 1 Unit Grain Collector 1. Primeover 5.60 Kw Si Engine 2. Engine: 7.5hp Gasoline 3. Capacity: 2,701 Kg/hr 4. Fuel Tank Capacity: 3.60 Liters 5. Fuel Consumption: 1.76 Liters/hour 6. Method Operation: Walk Behind 7. Additional Requirements: With Operator’s Instruction Manual With Basic Tools Such As Three (3) Pieces Open Wrenches; One (1) Piece Each Of Philips And Flat Screw Driver, One (1) Piece Adjustable Wrench 12”; 1 Piece Vise Grip 10” With Amtec Test Report On Agricultural Machinery-grain Collector Registered Of Ownership Of Multi-crop Thresher Thru Cmo-abe Division Unit Should Be Labeled: Two (2) Pieces Reflectorized/ Laminated Lgu-malaybalay City Sticker(see Attached Specification) Availability Of The Sales Services (service Center And Mechanics/ Technician Within Region 10 -services Of Mechanic/technical Personnel Are Free Of Charge For Replacing Parts Under Warranty To Put The Unit In Running Condition During Warranty Period. -repair Of Defective Units And Provision Of Other After Sales Services Shall Be Undertaken Within 5 Working Days Upon Receipt Of Complaints. Test Run Id Required -to Be Scheduled With The Presence Of A Test Engineer Of Abed And The Supplier With Their Technician. -materials To Be Provided By The Supplier To Test Run Purposes Minimum Of 1 Year Warrant -manufacturer/distributor/dealer Shall Issue A Warranty Certificate To The Buyer. Warranty Against Defective Materials And Workmanship Shall Be Provided For Parts And Services Except For Normal Wear And Tear Of Expandable Or Consumables Maintenance Parts Provided Services On Repair After Warranty At Reasonable Cost. Lot 4 1 Unit Corn Mill 1. Compact Corn Mill Medium With Bucket Plus 2. Primeover: Water Cooled Diesel Engine, 14hp, With Complete Accessories 3. Main Product Recovery: 55-62% (depending On The Size Of The Grits) 4. Components A. One (1) Unit Single Deck Corn Degerminator/peller (fitted With 6 Screen Huller Top And Bottom) B. One (1) Set Single Deck Grinder With Horizontal And Vertical Corrugation C. One (1) Unit Bucket Elevator Fitted With Tensioner D. One (1) Unit Corn Grits Separator Fitted With 5/16 Offset Eccentric Mechanism E. One (1) Set Double Suction Blower With 16 Inches And 18 Inches Diameter With Dust Collection System F. One (1) Set Of Heavy-duty Frames For Various Machineries G. One (1) Set Of Transmission Unit Fitted With Combinations Of Flat And V Pulleys. All Pulleys Used In The Compact Corn Mill Were All V-pulleys Providing Better Power Transmission H. All Of Pillow Block Bearing Used Were Screw Type. I. Additional Requirements: With Operator’s Instruction Manual With Basic Tools Such As Three (3) Pieces Open Wrenches; One (1) Piece Each Of Philips And Flat Screw Driver, One (1) Piece Adjustable Wrench 12”; 1 Piece Vise Grip 10” With Amtec Test Report On Agricultural Machinery-corn Mill Registered Of Ownership Of Multi-crop Thresher Thru Cmo-abe Division Unit Should Be Labeled: Two (2) Pieces Reflectorized/ Laminated Lgu-malaybalay City Sticker(see Attached Specification) Availability Of The Sales Services (service Center And Mechanics/ Technician Within Region 10 -services Of Mechanic/technical Personnel Are Free Of Charge For Replacing Parts Under Warranty To Put The Unit In Running Condition During Warranty Period. -repair Of Defective Units And Provision Of Other After Sales Services Shall Be Undertaken Within 5 Working Days Upon Receipt Of Complaints. Test Run Id Required -to Be Scheduled With The Presence Of A Test Engineer Of Abed And The Supplier With Their Technician. -materials To Be Provided By The Supplier To Test Run Purposes Minimum Of 1 Year Warrant -manufacturer/distributor/dealer Shall Issue A Warranty Certificate To The Buyer. Warranty Against Defective Materials And Workmanship Shall Be Provided For Parts And Services Except For Normal Wear And Tear Of Expandable Or Consumables Maintenance Parts Provided Services On Repair After Warranty At Reasonable Cost. Lot 5 2 Unit Corn Sheller (p 250,000.00/unit) 1. Primeover: A. Diesel Engine, 14 Hp, Water Cooled, Condenser Type, Direct Injection, Complete With Tools, Manual And Stub Shaft 2. Component A. Corn Sheller, Double Drum/suction Type, Dual Sifter, Locally Fabricated B. Capacity: 2-2.5 Tons/hour (50-60 Cobs Bags/hour) C. With Tires & Draw Bar D. Frame: A Bar 5mm X 2” (60-40-32-24) E. Feeding Hopper (bandiha): G.i. Plate 1.2mm (48-6) Reinforced W/ A Bar 4mmx 1 ½” F. Outer Casing (aparato): A Bar 3/16 X2 B.i Plate 2.0mm G. Blower: B.i Plate 2.0mm (20 X 1 ½-15 X 1 ½-9) H. Shaker (centric): A Bar 3/16 X 1, Bolted Screen ½ (upper), 1/8 X 61” Stainless/g.i Screen (lower) I. Drum Wheel: Shafting 1 ½-40 -1 ¼-38 J. Pulley: 12xbx1 ½, 8 X 1 ½, 4 X2x 1 ½( Fbar 5mm X 2) 10 X 2 X 1 ¼, 11 X 2 X 1 ¼, 6x2x1 ¼ (fbar 5mm X2) 10 X2x1 , 3 X2 X1 (fbar 5mmx2) K. V-belt Drum Wheel 48 X 3 L. Drum Wheel Blower 79 X2 M. Drum Wheel Centric 63 X 2 N. Pvc Elbow Series 1000-4” O. 0 Pillow Block 208-1 ½,207 -1 ¼,205 -1 P. Karo: B.i Pipe 2 ½” Schedule #40, A Bar 3/16 X 1 ½ 50-34-10 Q. #14 Tire 3. Accessories: - Two (2) Pcs. 3.50” X 2’ X30”mm V-pully - One (1)pc. 5/16” X ¾ Setscrew - Four (4) Pcs 3/8” X 2 ½ Bolt - Four (4) Pcs 3/8” X 2” Bolt - Eight (8) Pcs Plain Washer - Two (2) Pcs B-110 V-belts 4. Drawbar Stand - A Bar-5 Mm X2, Fbar 5mmx2 5. Additional Requirements: With Operator’s Instruction Manual With Basic Tools Such As Three (3) Pieces Open Wrenches; One (1) Piece Each Of Philips And Flat Screw Driver, One (1) Piece Adjustable Wrench 12”; 1 Piece Vise Grip 10” With Amtec Test Report On Agricultural Machinery-corn Sheller Registered Of Ownership Of Multi-crop Thresher Thru Cmo-abe Division Unit Should Be Labeled: Two (2) Pieces Reflectorized/ Laminated Lgu-malaybalay City Sticker(see Attached Specification) Availability Of The Sales Services (service Center And Mechanics/ Technician Within Region 10 -services Of Mechanic/technical Personnel Are Free Of Charge For Replacing Parts Under Warranty To Put The Unit In Running Condition During Warranty Period. -repair Of Defective Units And Provision Of Other After Sales Services Shall Be Undertaken Within 5 Working Days Upon Receipt Of Complaints. Test Run Id Required -to Be Scheduled With The Presence Of A Test Engineer Of Abed And The Supplier With Their Technician. -materials To Be Provided By The Supplier To Test Run Purposes Minimum Of 1 Year Warrant -manufacturer/distributor/dealer Shall Issue A Warranty Certificate To The Buyer. Warranty Against Defective Materials And Workmanship Shall Be Provided For Parts And Services Except For Normal Wear And Tear Of Expandable Or Consumables Maintenance Parts Provided Services On Repair After Warranty At Reasonable Cost.