Tenders of City Of Cape Town

1 Each X 6-9 Ìg/ml Microcystin Lf Solutionin Met 1 Each X 10 Ìg/ml Microcystin Lr Solution In Meth 1 Each X 2-8 Ìg/ml Microcystin Ly Solutionin Met 1 Each X 10 Ìg/ml Microcystin Rr Solutionin Meth 1 Each X 10 Ìg/ml Microcystin Yr Solution In Meth 1 Each X 10 Ìg/ml Nodularin Solution In Methanol

70 Each X Fusion Juice 5l Various 30 Each X Butter 1 Kg Tubs 40 Each X Jam 3.75 Kg 30 Each X Peanut Butter 2.75 Kg 50 Each X Oranges(bag) 500 Each X Bread (white) 500 Each X Styrofoam Cups Medium

110 Each X Book Lv Work Site Risk Assessment A4

* Refer To: Ga12500450 Radiation Contamination Monitor / Detector The Radiation Detector Shall Meet The Following Specifications: Digital Bar Graph Meter Display In The Range Of 0-1,000 Cps Digital Numeric Display Provides Automatic Direct Translation To Bq/cm2 For 14+ Pre-programmed Nuclides, Natural And Man-made # Detachable Radiation Probe With Up To 1.5 M / 4.9 Ft Of Extendable Cable Rotatable Probe For Internal Surface Measurements Audible Response With Adjustable Alarm Thresholds Performance Radiation Detection Alpha, Beta And Gamma. Automatic Direct Translation To Bq/cm2 For Cs-137, Am-241, C-14, Cl-36, Pb-210 (wet And Dry), Ra-226 (wet And Dry), Sr-90, Co-60, P-32, Pu-239, U-238 Over Range Response Peak Radiation Dose Rate Bar Graph Display Must Read Full Scale. Digital Numeric Display Shows 0uer (over) Above 4,000 Cps Detector Single Halogen Thin Window Geiger Muller Tube Electrical Characteristics Standard 9v Pp3 Battery Low Battery Indication On 4 Hours Battery Life Remaining Variation With Battery Voltage: Less Than 15% Over Operating Temperature Range Battery Life 100 Hours Typically With Background Radiation Variation With Battery Voltage Less Than 15% Over Operating Temperature Range Mechanical Characteristics Case Material Robust, Chemical Resistant Polymers Count Range Bar Graph Display (0-1,000 Cps) Digital Numeric Display In Cps Or Bq/cm2 Variation With Temperature Less Than 2% Humidity Range 0 - 95% Standard Compliance Eu Directives: 2004/108/ Ec Electromagnetic Compatibility Directive M J Kelder 0214001523 Quotation Conditions Clause - 2.14.1 & 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier's Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. ",,wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" ",,nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation.

* Quotation Conditions Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Benetech - Digital Anemometer - Wind Speed <(>&<)> Temperature (gm816) Or Equivalent To, Specification And Photo Attached. Contact Person: Nolitha Manakaza Contact Details: 021 444 2036 / 076 908 3444 Delivery Address: Old Strandfontein Road, Traffic Department Ottery (disaster Risk Management)

* Supply And Deliver 3 X Sleeper Couches At Harmony Park Resort Address Is Jan Bruin Street, Strand. Contact Person Is Hopewell Mosiea On 0792358382 Email Address Is Hopewell.mosiea@capetown.gov.za Sleeper Couch Specifications Features: Size: 2240mm Length X 1190mm Width X 350mm High Open (flat) 2240mm Length X 1190mm Width X 920mm High Upright Arm Size: 900mm Length X 150mm Width X 400mm High (arm Only) Weight Limit: 100kg Per Side Guarantee: 2 Year On The Frame Construction: Box Frame Made Of Chipboard And Masonite. The Inside Consists Of 8x24 Pocket Springs On Each Side. The Pocket Springs Are Covered With 50mm Medium Density Foam And Fabric. The Arms Have A Strip Of 20mm Medium Density Foam On Top And Wrapped With 12mm Medium Density Foam Before It Is Covered With Fabric. The Arms Are Fixed To The Couch. To Finish The Fabric Is Quilted In Straight Parallel Lines. 5 X 190mm Tapered Round Wooden Feet To Be Screwed In To Stand On. Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation.

* Ref Gg12500581 Linemarker Liquid - Colour: Bright White; Unit Package Size: 5 Litre; Application Method: Spray And Transfer Wheel; Specifications: Dilution Rates Up To 1:10; Application: All Turf,red Shale,grey Shale,clay And Artificial Turf Surfaces.

* Programme/event Description : Winter Readiness Delivery Date: 1 April 2025 Contact Person Details: Megan Pangeni E-mail Address: Megan.pangeni@capetown.gov.za Telephone No. 021 444 0703 Delivery Address: Social Development Office- Albion Springs Cl Rondebosch, Cape Town, 7700 Specifications: 300 X 500g Red Speckled Beans - Imbo/lion Or Equivalent * Specifications: 300 X 5kg Rice ? Spekko/tastic Or Equivalent * Specifications: 300 X 500g Brown Lentils ? Imbo Or Equivalent * Specifications: 300 X 500g Split Peas- Lion Or Equivalent * Specifications: 300 X 2.5kg Samp - Imbo/ace Or Equivalent * Specifications: 300 X 500g Beef Soup Mix- Top Class Or Equivalent * Specifications: 300 X 410g Baked Beans- Rhodes Or Equivalent * Specifications: 300 X 2 Kg Oats- Jungle Or Equivalent * Specifications: 300 X 2kg Macaroni- Fatti?s <(>&<)> Moni?s Or Equivalent * Specifications: 300 X 400g Soya Mince-imana Or Equivalent * Specifications: 300 X 500g Red Lentils-imbo Or Equivalent * Specifications: 28 X 24's Beef Stock Cubes-24 X10g-knorr Or Equivalent * Specifications: 28 X 24's Chicken Stock Cubes-24 X 10g: Knorr Or Equivalent * Specifications: 300 X 900g Smooth Apricot Jam-rhodes/all Gold Or Equivalent * Specifications: 300 X 800g Peanut Butter-yum Yum Or Equivalent * Specifications: 300 X 750ml Cooking Oil ? Sunflower/excellence Or Equivalent * Specifications: 300 X 1kg Salt-cerebos Or Equivalent * Specifications: 300 X 425g Tinned Pilchards Or Equivalent * Specifications: 300 X 410g Tinned Tomato Puree-all Gold/ Rhodes Or Equivalent * Specifications: 300 X 300g Tinned Corned Beef- Bull Brand Or Equivalent * Specifications: 300 X 1kg Margarine-stork/blossom Or Equivalent * Specifications: 300 X 5kg White Cake Flour-snowflake/sasko Or Equivalent * Specifications: 80 X 1kg S Barbeque Spice- Robertson?s Or Equivalent * Specifications: 80 X 800g Rajah Mild Curry Spice-robertson?s Or Equivalent * Specifications: 60 X 10g Instant Yeast- Anchor Or Equivalent * Specifications: 80 X 1kg S Chicken Spice- Robertson?s Or Equivalent * Specifications: 300 X 410 Canned Tomato <(>&<)> Onion Mix- Rhodes/all Gold Or Equivalent Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. #wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" #nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation.

16 Each X Transformer Power Supply Pa 1641

* Book - Type: Lv Work Site Risk Assessment; Size: A4 Portrait;application: Duplicate Self Carbonising, Perforated On First Page Only;specification: First Page White,second Page Yellow,50 Sets Per Booksequentially Numbered,coct Logo Imprinted Top Left In Black And W Hite,with Fold In Backing Page # As Per Specification. Collect Specimen Fromstore And Submit Proof For Approval; Guideline: Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be De Emed To Be Accompanied By The Words "or Equivalent". Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation.