City Of Baguio Tender

Description 5 Pcs Check Valve 3”, Flange Type (please See Complete Specifications Below) Approved Budget Cost: ₱23,355.00 / Pc 5 Pcs Check Valve 4”, Flange Type (please See Complete Specifications Below) Approved Budget Cost: ₱27,228.00 / Pc 1 Pc 6”ø Gate Valve, Flanged Type With Companion Steel Flanges And Bng (please See Complete Specifications Below) Approved Budget Cost: ₱42,600.00 / Pc X X X X X Check Valve Specifications: Swing Check Valve, Resilient Seated With Closed Bushings Pressure Rating: • Pn 10: 150 Psi For 2”ø To 12”ø • Pn 16: 240 Psi For 2”ø X 12”ø Connection: Flanged And Drilling To Iso 7005-2 Test: Hydraulic Test To Bs 5153:1974 (1991) Seat: 1.1 X Pn Body: 1.5 X Pn Materials: Body, Bonnet And Hinge: Ductile Iron, Ggg-50, To Din 1693 (bs 2789 Grade 500-7) Coating: Electrostatically Applied Epoxy Resin To Din 30677 – Internally And Externally Shaft: Stainless Steel Bonnet Gasket: Epdm Rubber Bushing: Brass, Dezincification Resistant Hexagon Bolt, Washer, And Pin: Stainless Steel A2 Resilient Seated Disc: Epdm Rubber With Steel Insert Swing Check Valve Dimensions And Weight (approx) Both For Pn 10 And 16: Size / Diameter, Din Length (mm), Din Weight (kg) 3” (80mm) 260 20 4” (100mm) 300 26 Gate Valve Flanged Type Specifications: Design Code: Hydraulic Test To Bs 5163 (din3230 / Din3352) Or Jis B2043, Din 3352, Awwa C509, Bs5163 Maximum Pressure: Pn16 Or 16 Bar Temperature Range: -20 To 160 Degree Centigrade Face To Face: Bs 5163 Or Jis B2002, Din 3202-f5, Din 3202- F4, Ansi B16.10, Bs 5163 End Flange: En1092-2 (iso 7005-2) Or Jis B2212 10k, Din 2533 Pn 10/16, Ansi 150#, Bs4504 Pn 10/16 Tightness Test: Operating Torque Test Or Jis B2003, Din 3230, Awwa C509, Bs 6755 Materials: Body: Ductile Iron, Ggg-50 To Din 1693 (bs 2789 Grade 500-7) Or Ductile Iron Wedge: Ductile Iron (di) + Nbr Or Ductile Iron, Ggg-50, Core Fully Encapsulated With Epdm Rubber With Integral Wedge Nut Of Dezincification Resistant Brass, Cz 132 To Bs 2874 Wedge Nut: Brass Or Dezincification Resistant Brass Stem: Stainless Steel, Din X 20 Cr 13 Or Stainless Steel / Brass Bonnet Gasket: Epdm Rubber Or Epdm / Nbr Bonnet: Ductile Iron (di) Or Stainless Steel A2, Sealed With Hot Melt O-ring: Nbr Or Epdm / Nbr Stem Collar: Brass Gland Flange: Ductile Iron Or Ductile Iron Gjs-500-7 (ggg- 50) Dustproof Ring: Nbr Or Epdm / Nbr Hex Nut: Cast Iron Overall Dimensions: Size / Dn Length (l) Mm Height (h) Mm Width Or D Mm Weight Kgs Dn150 (6”) 267 448-565 260-285 51-52 X X X X X Note: Not To Be Awarded On A One (1) Lot Basis. This Is A Two (2) Envelope System: Envelope “a” To Contain The Following, Among Others: ) A Refundable Bid Bond In The Form Of Cash, Manager's Or Cashier's Check Equivalent To 2% Or A Surety Bond Callable On Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission Equivalent To 5% Of The Total Approved Budget Cost Is Required For A Total Purchase Bid Amount Of ₱50,000.00 And Above. Validity Of The Surety Bond Is 120 Days From The Date Of Opening Of Bids Or Bid Securing Declaration Regardless Of The Amount Of Bid; ) Terms Of Payment, Delivery, Warranty, Bid Validity, And Complete Specifications; ) Brochure/s (original); ) Proof Of Payment Of A Non-refundable Fee Of ₱1,000.00; Otherwise, Bids Shall Not Be Opened ) Certificate Of Authorized Distributorship / Dealership Issued By The Principal Supplier To The Participating Bidder (with Red Ribbon) If None Has Been Submitted To The Bac In Its Accreditation; ◦ For Bidders Who Have Principal Foreign Suppliers, The Bwd-bac Shall Accept An Apostilled Certificate Of Authorized Distributorship / Dealership Issued By A Competent Authority Of The Host Government In Lieu Of The Certificate Of Authorized Distributorship / Dealership (with Red Ribbon), Except For Non-contracting Countries To The Apostille Convention, Which Still Require The Red Ribbon Requirement. ◦ For Locally Produced/manufactured Products, Only A Certificate Of Authorized Distributorship / Dealership W/o Red Ribbon Is Required If Applicable; ) Iso Certificate Issued To The Principal Supplier/participating Bidder For The Offered Material Or Equipment Brand Name (if None Has Been Submitted To The Bac In Its Accreditation); ) International Certificate Of Warranty. Envelope “b” To Contain The Bid Cost Per Unit.