City Of Baguio Tender

Description 4 Sets Vertical Centrifugal Pump And Motor Motor Requirement • Type: Induction • Hp Rating: 50 Hp • Nominal Voltage: 230v / 460v • Supply Frequency: 60hz • Nominal Speed: 3600 Rpm • Number Of Phase: 3 • Insulation Class: F • Efficiency At Full Load: Not Less Than 90% • Enclose Class: Tefc Coupled And Aligned With Heavy Duty Mounting Base To: Pump Requirement: • Capacity: 300 Usgpm • Tdh: 400 Feet Construction Material • Shaft Seal: Cartridge Type • Shaft Seal Material: Hqqe • Pump Head: Stainless Steel • Pump Shaft: Stainless Steel • Impeller: Stainless Steel • Chamber: Stainless Steel • Outer Sleeve: Stainless Steel • Base: Stainless Steel • Neck Ring: Peek • Support Bearing: Graflon • Bearing Rings: Tungsten Carbide • Pump Efficiency: Not Less Than 75% At Ratedcapacity Complete With Motor Control Soft Starter Soft Starter Adaptable To 50hp, 240v Nominal, 3 Phase, 60hz Submersible Motor Soft Starter Specifications: 1 Main Voltage L1, L2, L3 200vac – 300vac (+/-10%) 2 Control Voltage (a4, A6) 220-240vac (+10% / -15%) Main Frequency 60hz (+/- 10%) Rated Insulation Voltage To Earth 600vac Rated Impulse Withstand Voltage 4kv 3 Short Circuit Capability Coordination Semi-conductor Fuses Prospective Current 65ka 4 Outputs Relay Outputs 10a @ 250vac Resistive Programmable Outputs 1 (nc), 1 (no), 1 (co) Analogue Outputs 4-20ma Maximum Load 600ω (12vdc @ 20ma Accuracy +/-5%) 24vdc Output, Maximum Load 200ma (accuracy +/- 10%) 5 Environmental Protection Ip20 & Nema, Ul Indoor Type 1 Operating Temperature -10°c To 60°c Storage Temperature -25°c To 60°c 6 Heat Dissipation During Start 4.5 Watts Per Ampere - For On-site Delivery - Supplier To Provide High Tensile Mounting Bolts For Pump Base - Supplier To Provide Bng And Flanges For Both Suction And Discharge Ports - Supplier To Provide Manufacturer Pump Test Result Upon Delivery - Supplier To Provide Brochure With Full Specification And Pump Curve Of Offered Booster Pump Approved Budget Cost: ₱1,305,000.00 / Set X X X X X This Is A Two (2) Envelope System: Envelope “a” To Contain The Following; Among Others: A) A Refundable Bid Bond In The Form Of Cash, Manager's Or Cashier's Check Equivalent To 2% Or Surety Bond Callable On Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission Equivalent To 5% Of The Total Approved Budget Cost Is Required For A Total Purchase Bid Amount Of ₱ 50,000.00 And Above. Validity Of The Surety Bond Is 120 Days From The Date Of Opening Of Bids Or Bid Securing Declaration Regardless Of Amount Of Bid; B) Terms Of Payment, Delivery, Warranty, Bid Validity And Complete Specifications; C) Brochure/s (original); D) Proof Of Payment Of A Non-refundable Fee Of ₱10,000.00; Otherwise, Bids Shall Not Be Opened E) Certificate Of Authorized Distributorship / Dealership Issued By The Principal Supplier To The Participating Bidder (with Red Ribbon) If None Has Been Submitted To The Bac In Its Accreditation; • For Bidders Who Have Foreign Principal Suppliers, The Bwd-bac Shall Accept An Apostilled Certificate Of Authorized Distributorship / Dealership Issued By A Competent Authority Of The Host Government In Lieu Of The Certificate Of Authorized Distributorship / Dealership (with Red Ribbon), Except For Non-contracting Countries To The Apostille Convention, Which Still Require The Red Ribbon Requirement. • For Locally Produced / Manufactured Products, Only A Certificate Of Authorized Distributorship / Dealership W/o Red Ribbon Is Required If Applicable; F) Iso Certificate Issued To The Principal Supplier/participating Bidder For The Offered Material Or Equipment Brand Name (if None Has Been Submitted To The Bac In Its Accreditation); G) International Certificate Of Warranty. Envelope “b” To Contain The Bid Cost Per Unit.