City Of Baguio Tender

Description 1 Lot Supply, Delivery, Installation And Commissioning Of 1 Unit 20-ft Containerized Ultra-filtration System Permeate Capacity 70 M3 / Hr Design Basis Equipment % Recovery Flow Rate Unit Total Feed To Ultra Filtration System - 72.50 M³/hr. No. Of Ultra-filtration Skid - 1 No. Ultra-filtration System Feed 95% 72.50 M³/hr. Ultra-filtration Permeate 70.00 M³/hr. Ultra-filtration Reject 2.50 M³/hr. Feed Water Analysis Sr. No. Parameter Values Unit 1 Feed Water Source Surface Water 2 Ph 7.5 -8.5 Mg/lit 3 Turbidity 30- 50 Ntu 4 Total Suspended Solid 50-100 Mg/lit 5 Total Dissolved Solids 100-5000 Mg/lit 6 Oil & Grease 0-15 Mg/lit 7 Cod < 200 Mg/lit 8 Bod < 30 Mg/lit Note: The System Is Designed Based On The Feed Water Analysis Considered In Column Of Design. If Any Changes In The Feed Water Parameters Exceeding 5% Of Value Mentioned In Feed Water May Affect The Treated Water Quality And / Or Quantity. Raw Water Temperature Is Considered As 25°c Throughout The Year For Design Purpose. Treated Water Quality Sr. No. Parameter Values Unit 1 Ph 7.5 -8.5 Mg/lit 2 Turbidity < 0.1 Ntu 3 Oil & Grease < 1 Mg/lit 4 Total Suspended Solid Nil Mg/lit 5 Cod < 100 Mg/lit 6 Bod < 30 Mg/lit Technical Specification Uf Feed Cum Cip Pump: Component Specification Quantity 1 Nos. (w) Material Of Construction Casing & Impeller: Ss 316 Capacity (each) 70.00 M³/hr. @ 3.0 Bar Type Horizontal Centrifugal Pump Voltage / Phase 60 Hz / 440vac / 3 Phases Vfd Na Accessories Location Manual Valves Suction & Discharge Of Pump Non-return Valve Discharge Of Pump Sampling Valve Discharge Of Pump Pressure Gauge Discharge Of Pump Skid Piping Upvc Sch 40 Pre-filtration: Component Specification Quantity 1 No. (w) Material Of Construction Upvc Housing – 2 Nos. Cartilages Capacity (each) 70.00 M³/hr. @ 3.0 Bar Type Autoback Wash Vertical Cartridge Voltage / Phase 60 Hz / 440vac / 3 Phases Vfd Na Accessories Location Manual Valves Suction & Discharge Of Pump Non-return Valve Discharge Of Pump Sampling Valve Discharge Of Pump Pressure Gauge Discharge Of Pump Skid Piping Upvc Sch 40 Ultra-filtration Membrane Skid: Component Specification Quantity 1 Set (w) Net Permeate 70 M³/hr. Type Hollow Fiber No Of Modules 30 Nos. Moc Pan (poly Alco Nitrile) Accessories Location Skid Valves Pneumatically Actuated Valves Sampling Valve At Outlet Pressure Switch At Inlet & Backwash Header Flow Indicator At Inlet Flow Transmitter At Outlet Skid Piping Upvc Sch 40 Skid Frame Containerized Ms Painted Uf Cip Tank: Component Specification Tank Quantity 1 No. Mf Feed Tank Capacity 10,000 L Material Of Construction Hdpe Accessories Level Switch 1 No. Provided Drain Valve Provided Skid Piping Upvc Sch 40 Uf Backwash Cum Cip Pump: Component Specification Quantity 1 Nos. (working) Material Of Construction Casing & Impeller: Ss 316 Capacity 105.0 M³/hr. @ 2.0 Bar Type Horizontal Centrifugal Pump Voltage / Phase 60 Hz/440vac / 3 Phases Manual Valves Suction & Discharge Of Pump Non-return Valve Discharge Of Pump Sampling Valve Discharge Of Pump Air Compressor: Component Specification Quantity 1 No. (1 Working) Material Of Construction Ci Capacity 220 M³/hr. @ 12 Bar Voltage / Phase 60 Hz/440vac / 3 Phases Accessories Location Pressure Reducing Valve At Mf Air Line Air Flow Regulator Unit At Instrument Air Line Skid Piping Gi C Class Control Panel & Instrumentation: Component Specification Panel Plc Based Panel Box Ms Powder Coated Electrical Cable (within Skid) Flexible / Armored Hmi 7”, Touch Screen Color Rotameter Uf Inlet Electromagnetic Flowmeter 4-20 Ma Uf Permeate Electromagnetic Flowmeter 4-20 Ma Uf Backwash Approved Budget Cost: ₱25,000,000.00 / Lot Please See Attached Terms Of Reference (tor) X X X X X This Is A Two (2) Envelope System: Envelope “a” To Contain The Following, Among Others: A) A Refundable Bid Bond In The Form Of Cash, A Manager's Or Cashier's Check Equivalent To 2%, Or A Surety Bond Callable On Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission Equivalent To 5% Of The Total Approved Budget Cost Is Required For A Total Purchase Bid Amount Of ₱ 50,000.00 And Above. The Validity Of The Surety Bond Is 120 Days From The Date Of Opening Of Bids Or Bid Securing Declaration, Regardless Of The Amount Of Bid. B) Terms Of Payment, Delivery, Warranty, Bid Validity, And Complete Specifications; C) Brochure(s) (original); D) Proof Of Payment Of A Non-refundable Fee Of ₱25,000.00; Otherwise, Bids Shall Not Be Opened E) Certificate Of Authorized Distributorship Or Dealership Issued By The Principal Supplier To The Participating Bidder (with Red Ribbon) If None Has Been Submitted To The Bac In Its Accreditation; -for Bidders Who Have Principal Foreign Suppliers, The Bwd-bac Shall Accept An Apostilled Certificate Of Authorized Distributorship Or Dealership Issued By A Competent Authority Of The Host Government In Lieu Of The Certificate Of Authorized Distributorship Or Dealership (with Red Ribbon), Except For Non-contracting Countries To The Apostille Convention, Which Still Require The Red Ribbon Requirement. -for Locally Produced Or Manufactured Products, Only A Certificate Of Authorized Distributorship Or Dealership Without A Red Ribbon Is Required, If Applicable. F) Iso Certificate Issued To The Principal Supplier Or Participating Bidder For The Offered Material Or Equipment Brand Name (if None Has Been Submitted To The Bac In Its Accreditation); G) International Certificate Of Warranty Envelope “b” To Contain The Bid Cost Per Unit. Pre-bid Conference: January 19, 2024 9:30am Via Zoom Application Meeting Id: 452 718 8447 Password: 9buvqr