City Of Baguio Tender

Description 1 Piece 4” Ø Gate Valve, Flanged Type With Companion Flanges, And Bng Design Code: Hydraulic Test To Bs 5163 (din3230 / Din3352) Or Jis B2043, Din 3352, Awwa C509, Bs5163 Maximum Pressure: Pn16 Or 16 Bar Temperature Range: -20 To 160 Degrees Centigrade Face To Face: Bs 5163 Or Jis B2002, Din 3202-f5, Din 3202-f4, Ansi B16.10, Bs 5163 End Flange: En1092-2 (iso 7005-2) Or Jis B2212 10k, Din 2533 Pn 10/16, Ansi 150#, Bs4504 Pn 10/16 Tightness Test: Operating Torque Test Or Jis B2003, Din 3230, Awwa C509, Bs 6755 Materials: Body: Ductile Iron, Ggg-50 To Din 1693 (bs 2789 Grade 500-7) Or Ductile Iron Wedge: Ductile Iron (di) + Nbr Or Ductile Iron, Ggg-50, Core Fully Encapsulated With Epdm Rubber With Integral Wedge Nut Of Dezincification Resistant Brass, Cz 132 To Bs 2874 Wedge Nut: Brass Or Dezincification Resistant Brass Stem: Stainless Steel, Din X 20 Cr 13 Or Stainless Steel / Brass Bonnet Gasket: Epdm Rubber Or Epdm / Nbr Bonnet: Ductile Iron (di) Or Stainless Steel A2, Sealed With Hot Melt O-ring: Nbr Or Epdm / Nbr Stem Collar: Brass Gland Flange: Ductile Iron Or Ductile Iron Gjs-500-7 (ggg-50) Dustproof Ring: Nbr Or Epdm / Nbr Hex Nut: Cast Iron Overall Dimensions: Size / Dn Length (l) Mm Height (h) Mm Width Or D Mm Weight Kgs Dn100 (4”) 229 334-430 200-220 26-28 Approved Budget Cost: ₱22,075.00 / Set 2 Pieces 4” Ø Gate Valve, Flanged Type With Combi-flanges, And Bng Design Code: Hydraulic Test To Bs 5163 (din3230 /din3352) Or Jis B2043, Din 3352, Awwa C509, Bs5163 Maximum Pressure: Pn16 Or 16 Bar Temperature Range: -20 To 160 Degrees Centigrade Face To Face: Bs 5163 Or Jis B2002, Din 3202-f5, Din 3202-f4, Ansi B16.10, Bs 5163 End Flange: En1092-2 (iso 7005-2) Or Jis B2212 10k, Din 2533 Pn 10/16, Ansi 150#, Bs4504 Pn 10/16 Tightness Test: Operating Torque Test Or Jis B2003, Din 3230, Awwa C509, Bs 6755 Materials: Body: Ductile Iron, Ggg-50 To Din 1693 (bs 2789 Grade 500-7) Or Ductile Iron Wedge: Ductile Iron (di) + Nbr Or Ductile Iron, Ggg-50, Core Fully Encapsulated With Epdm Rubber With Integral Wedge Nut Of Dezincification Resistant Brass, Cz 132 To Bs 2874 Wedge Nut: Brass Or Dezincification Resistant Brass Stem: Stainless Steel, Din X 20 Cr 13 Or Stainless Steel / Brass Bonnet Gasket: Epdm Rubber Or Epdm / Nbr Bonnet: Ductile Iron (di) Or Stainless Steel A2, Sealed With Hot Melt O-ring: Nbr Or Epdm / Nbr Stem Collar: Brass Gland Flange: Ductile Iron Or Ductile Iron Gjs-500-7 (ggg-50) Dustproof Ring: Nbr Or Epdm / Nbr Hex Nut: Cast Iron Overall Dimensions: Size / Dn Length (l) Mm Height (h) Mm Width Or D Mm Weight Kgs Dn100 (4”) 229 334-430 200-220 26-28 Approved Budget Cost: ₱18,303.30 / Set X X X X X This Is A Two (2) Envelope System: Envelope “a” To Contain The Following, Among Others: A) A Refundable Bid Bond In The Form Of Cash, A Manager's Or Cashier's Check Equivalent To 2%, Or A Surety Bond Callable On Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission Equivalent To 5% Of The Total Approved Budget Cost Is Required For A Total Purchase Bid Amount Of ₱ 50,000.00 And Above. The Validity Of The Surety Bond Is 120 Days From The Date Of Opening Of Bids Or Bid Securing Declaration, Regardless Of The Amount Of Bid. B) Terms Of Payment, Delivery, Warranty, Bid Validity, And Complete Specifications; C) Brochure(s) (original); D) Proof Of Payment Of A Non-refundable Fee Of ₱500.00; Otherwise, Bids Shall Not Be Opened E) Certificate Of Authorized Distributorship Or Dealership Issued By The Principal Supplier To The Participating Bidder (with Red Ribbon) If None Has Been Submitted To The Bac In Its Accreditation; -for Bidders Who Have Principal Foreign Suppliers, The Bwd-bac Shall Accept An Apostilled Certificate Of Authorized Distributorship Or Dealership Issued By A Competent Authority Of The Host Government In Lieu Of The Certificate Of Authorized Distributorship Or Dealership (with Red Ribbon), Except For Non-contracting Countries To The Apostille Convention, Which Still Require The Red Ribbon Requirement. -for Locally Produced Or Manufactured Products, Only A Certificate Of Authorized Distributorship Or Dealership Without A Red Ribbon Is Required, If Applicable. F) Iso Certificate Issued To The Principal Supplier Or Participating Bidder For The Offered Material Or Equipment Brand Name (if None Has Been Submitted To The Bac In Its Accreditation); G) International Certificate Of Warranty Envelope “b” To Contain The Bid Cost Per Unit.