City Of Baguio Tender

Description 20 Pcs Air Release Valve 1”ø (please See Complete Specifications Below) Approved Budget Cost: ₱14,272.00 / Pc 5 Pcs Air Release Valve 2”ø (please See Complete Specifications Below) Approved Budget Cost: ₱27,527.00 / Pc 1,022 Pcs ½” Ball Valve / Stop Cock Ball Type-lock Wing (threaded) (please See Complete Specifications Below) Approved Budget Cost: ₱638.00 / Pc 22 Pcs 1” Ball Valve / Stop Cock Ball Type-lock Wing (threaded) (please See Complete Specifications Below) Approved Budget Cost: ₱1,252.00 / Pc 4 Pcs Check Valve, Flange Type, Non-slam, 6” (please See Complete Specifications Below) Approved Budget Cost: ₱644,600.00 / Pc 1 Pc ” Combination Pressure Reducing And Pressure Sustaining Valve With Strainer, Flanges, And Bng (please See Complete Specifications Below) Approved Budget Cost: ₱194,608.00 / Set 1 Pc 4” Combination Pressure Reducing And Pressure Sustaining Valve With Strainer, Flanges, And Bng (please See Complete Specifications Below) Approved Budget Cost: ₱281,595.00 / Pc 2 Pcs Float Control Valve, Flange Type, 3” (please See Complete Specifications Below) Approved Budget Cost: ₱124,896.00 / Pc 2 Pcs Float Control Valve, Flange Type, 4” (please See Complete Specifications Below) Approved Budget Cost: ₱131,650.00 / Pc 2 Pcs Float Control Valve, Flange Type, 6” (please See Complete Specifications Below) Approved Budget Cost: ₱222,271.00 / Pc 440 Pcs Gate Valve, 1”ø, Threaded Type (please See Complete Specifications Below) Approved Budget Cost: ₱931.00 / Pc 19 Pcs Gate Valve 2”, Threaded Type (please See Complete Specifications Below) Approved Budget Cost: ₱2,906.00 / Pc 5 Pcs Gate Valve 2” Flange Type With Companion Steel Flanges And Bng (please See Complete Specifications Below) Approved Budget Cost: ₱12,508.00 / Pc 22 Pcs Gate Valve 3” Flange Type With Companion Steel Flanges And Bng (please See Complete Specifications Below) Approved Budget Cost: ₱18,795.00 / Pc 7 Pcs Gate Valve 4” Flange Type With Companion Steel Flanges And Bng (please See Complete Specifications Below) Approved Budget Cost: ₱27,479.00 / Pc 11 Pcs Gate Valve 6” Flange Type With Companion Steel Flanges And Bng (please See Complete Specifications Below) Approved Budget Cost: ₱42,600.00 / Pc 100 Pcs Hdpe Coupling 1/2” Body: Polypropylene, High Grade Copolymer Split Ring: Acetal; Liner: Acetal, O-ring Fixed Inside; Seal: Nitrile Rubber Nbr Approved Budget Cost: ₱278.00 / Pc 100 Pcs Hdpe Coupling 1” Body: Polypropylene, High Grade Copolymer Split Ring: Acetal; Liner: Acetal, O-ring Fixed Inside; Seal: Nitrile Rubber Nbr Approved Budget Cost: ₱420.00 / Pc 30 Pcs Hdpe Female Coupling Adapter, 2”ø Body: Polypropylene, High Grade Copolymer Split Ring: Acetal; Liner: Acetal, O-ring Fixed Inside; Seal: Nitrile Rubber Nbr Approved Budget Cost: ₱1,347.00 / Pc 150 Pcs Hdpe Poly Bst Elbow 1”ø Body – Polypropylene, High Grade Copolymer; Split Ring – Acetal; Seal – Nitrile Rubber Nbr Approved Budget Cost: ₱381.00 / Pc Combination Air Valves Specifications: For 1”ø – 2”ø Combination Air Valves, Pn16/25 Technical Specifications: • The Valve Shall Consist Of Two Floats (the Bottom And The Upper Float), The Bottom Float Drops And Allowing The Trapped Air To Be Vented Through The Small Nozzle At The Center Of The Top Float. • The Float Shall Have A Float Guide On Two Sides. • The Valve Shall Be Made Of Cast Iron / Ductile Iron With Glass Reinforced Plastic (grp) Inner Body • Float Body Shall Be Made Of Polypropylene And It Should Be Cylindrical / Trapezoid In Design I. A Parts Specification Of 1”ø Combination Air Valves: Description Material Base Brass O-ring Nbr Automatic Float Foamed Polypropylene Automatic Seal Epdm Bonnet Pa6+30gf Drainage Elbow Polypropylene Id Plate Al Metallic Cover Cast Iron I.b Parts Specification Of 2” Ø Combination Air Valves: Description Material Bonnet Pa6+30gf Cover D.i. Flanged Base D.i. Elbow Polypropylene Float Foam Pp Slider Pa6+30gf Seal Epdm Spacer Pom Auto Seal Epdm Flat Seal Epdm O-ring Nitrilic Rubber Id Plate Aluminum Screw Hex Sst Washer Sst Dimensions & Weights: 1”ø 2” Ø Height (h) 137 Mm 259.50 Mm Width (w) 99.5 Mm 214 Mm Thread (d) 1” (bsp/npt) 2” (bsp/npt) Nozzle Area (a) 12.85 Mm2 12.85 Mm2 Total Width (l) 116.5 Mm - Drainage Diameter (e) ¼” Bsp 1 ½” Bsp Kinetic Nozzle Area (k) - 908 Mm Flange - Iso 6/25 / Ansi 1 50 Weight 2 Kg 9 Kgs. Ball Valve Specifications: -elements Of The Valve Should Be Free From Dirt, And There Should Not Be Any Dirt, Chip, Burrs, And Flakes Etc. Before Assembling. -the Threaded Parts Of The Socket Should Be Coated With Sealing Glue. -the Valve Should Not Present Block To The Circulation Of Closing And Opening, And It Should Be Flexible. -when The Valve Is Fully Open, The Degree Of The Body Axis And Ball Axis Should Be Less Than 3 Degrees. -seal Test Should Be Carried And Testing Pressure Should Not Be Less Than 0.6mpa. -the Valve Should Be Turned Off During Delivery. Materials Body: Cw617n ; Bonnet: Cw617n Ball: Hpb57-3 ; Ball Seat: Ptfe Sm031 Stem: Hpb57-3 ; Handle: Hpb57-3 Elastic Cylindrical Pin: Stainless Steel Standard Specifications For Non-slam Check Valves: Components: Connections: Flanges Iso 7005 Oransi B16; Pressure Range: 7 – 360 Psi Max. Water Temp.: 80°c Or 180°f Materials Standard Body And Cover Ductile Iron Main Internal Sst (1.5” - 6), Coated Steel (8” - 32”) Spring Sst 302 Diaphragm Nylon Fabric Reinforced Seals Epdm Coating Polyester Control Trim Brass Accessories: Companion Flange With Bolts, Nuts, And Gaskets Overall Dimensions: Size / Dn Length (l) Mm Height (h) Mm Width (d) Mm Weight Kgs Dn150 (6”) 480 558 330 80 Combination Pressure Reducing And Sustaining Valves Specifications: Pressure Rating: Pn 16 Connections: Flanges Iso / Ansi Control System: Brass 2-way Pilot Valves, Self Flushing, Removable Internal Filter, Manual Closure Valve Accessories: Y-strainer, Flanges, Rubber Seal, Bng Materials: Body And Bonnet: Ductile Iron Seat, Spring, Spring Washer, Shaft / Stem, Nut And Bolt: Staonless Steel Seal, O-ring, Diaphragm: Rubber Plug, Air Release Nut / Needle Valve: Brass Separating Disk / Diaphragm Support: Bronze Dimensions And Weight (approx) Size / Dn Length (l) Mm Dn50 (2”) 230 Dn100 (4”) 350 Standard Specification For 2” To 6” Diameter Flange Type Float Control Valves Components: Main Valve Self-flushing Filter Cock Valves Needle Valve / Distribution Block Modulating Float Valve / Hydraulic Control Block Accessories: Companion Flange With Bolts, Nuts, And Gasket Materials Standard Body And Bonnet Ductile Iron Diaphragm Natural Rubber Spring Sst 302 Nuts And Bolts Coated Steel Coating Polyester Accessories: Companion Flange With Bolts, Nuts, And Gasket Overall Dimensions: Size / Dn Length (l) Mm Height (h) Mm Width (d) Mm Weight, Kgs Dn80 (3”) 285 200 200 18.2 Dn100 (4”) 305 230 230 24 Dn150 (6”) 390 314 300 49 Gate Valve (threaded) Specifications: Features: Brass Body, Non-rising Stem, Screw-over Bonnet, Threaded Ends Specifications: Nominal Pressure: 200 Psi Handwheel: Aluminum Body: Forge Brass Size Length (l) Mm Inside Diameter Mm Diamter Mm Height Mm 1” 55 25 51 101 2” 72 47 80 159 Gate Valve Flanged Type Specifications: Design Code: Hydraulic Test To Bs 5163 (din3230 / Din3352) Or Jis B2043, Din 3352, Awwa C509, Bs5163 Maximum Pressure: Pn16 Or 16 Bar Temperature Range: -20 To 160 Degree Centigrade Face To Face: Bs 5163 Or Jis B2002, Din 3202-f5, Din 3202- F4, Ansi B16.10, Bs 5163 End Flange: En1092-2 (iso 7005-2) Or Jis B2212 10k, Din 2533 Pn 10/16, Ansi 150#, Bs4504 Pn 10/16 Tightness Test: Operating Torque Test Or Jis B2003, Din 3230, Awwa C509, Bs 6755 Materials: Body: Ductile Iron, Ggg-50 To Din 1693 (bs 2789 Grade 500-7) Or Ductile Iron Wedge: Ductile Iron (di) + Nbr Or Ductile Iron, Ggg-50, Core Fully Encapsulated With Epdm Rubber With Integral Wedge Nut Of Dezincification Resistant Brass, Cz 132 To Bs 2874 Wedge Nut: Brass Or Dezincification Resistant Brass Stem: Stainless Steel, Din X 20 Cr 13 Or Stainless Steel / Brass Bonnet Gasket: Epdm Rubber Or Epdm / Nbr Bonnet: Ductile Iron (di) Or Stainless Steel A2, Sealed With Hot Melt O-ring: Nbr Or Epdm / Nbr Stem Collar: Brass Gland Flange: Ductile Iron Or Ductile Iron Gjs-500-7 (ggg50) Dustproof Ring: Nbr Or Epdm / Nbr Hex Nut: Cast Iron Overall Dimensions: Size / Dn Length (l) Mm Height (h) Mm Width Or D Mm Weight Kgs Dn50 (2”) 178 300-241 160-165 13-14 Dn80 (3”) 203 297-390 200 20-23 Dn100 (4”) 229 334-430 200-220 26-28 Dn150 (6”) 267 448-565 260-285 51-52 Note: Not To Be Awarded On A One (1) Lot Basis. This Is A Two (2) Envelope System: Envelope “a” To Contain The Following; Among Others: A) A Refundable Bid Bond In The Form Of Cash, Manager's Or Cashier's Check Equivalent To 2% Or Surety Bond Callable On Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission Equivalent To 5% Of The Total Approved Budget Cost Is Required For A Total Purchase Bid Amount Of ₱ 50,000.00 And Above. Validity Of The Surety Bond Is 120 Days From The Date Of Opening Of Bids Or Bid Securing Declaration Regardless Of Amount Of Bid; B) Terms Of Payment, Delivery, Warranty, Bid Validity And Complete Specifications; C) Brochure/s (original); D) Proof Of Payment Of A Non-refundable Fee Of ₱10,000.00; Otherwise Bids Shall Not Be Opened E) Certificate Of Authorized Distributorship / Dealership Issued By The Principal Supplier To The Participating Bidder (with Red Ribbon) If None Has Been Submitted To The Bac In Its Accreditation; ◦ For Bidders Who Have Foreign Principal Suppliers, The Bwd-bac Shall Accept An Apostilled Certificate Of Authorized Distributorship / Dealership Issued By A Competent Authority Of The Host Government In Lieu Of The Certificate Of Authorized Distributorship / Dealership (with Red Ribbon), Except For Non-contracting Countries To The Apostille Convention, Which Still Require The Red Ribbon Requirement. ◦ For Locally Produced / Manufactured Products, Only A Certificate Of Authorized Distributorship / Dealership W/o Red Ribbon Is Required If Applicable; F) Iso Certificate Issued To The Principal Supplier/participating Bidder For The Offered Material Or Equipment Brand Name (if None Has Been Submitted To The Bac In Its Accreditation); G) International Certificate Of Warranty. Envelope “b” To Contain The Bid Cost Per Unit.