City Of Baguio Tender

Description 500 Pcs. 1⁄2” Ball Valve / Stop Cock Ball Type-lock Wing (threaded) (please See Complete Specifications Below.) Approved Budget Cost: ₱638.00 / Pc 5 Pcs. Check Valve 3”, Flange Type, 300 Psi (please See Complete Specifications Below) Approved Budget Cost: ₱18,960.00 /pc 17 Pcs. Check Valve 4”, Flange Type, 300 Psi (please See Complete Specifications Below) Approved Budget Cost: ₱33,521.00 / Pc 7 Pcs. Check Valve 6”, Flange Type, 300 Psi (please See Complete Specifications Below) Approved Budget Cost: ₱62,707.00 / Pc 2 Pcs Check Valve 8”, Flange Type, 300 Psi (please See Complete Specifications Below) Approved Budget Cost: ₱94,811.00 / Pc 5 Pcs. 1”ø Gate Valve, Threaded Type Class 125 (please See Complete Specifications Below) Approved Budget Cost: ₱931.00 / Pc 5 Pcs. 2”ø Gate Valve, Threaded Type (please See Complete Specifications Below) Approved Budget Cost: ₱2,906.00 / Pc 50 Pieces Of 1/2”ø Hdpe Coupling Body: Polypropylene, High-grade Copolymer Split Ring: Acetal; Liner: Acetal, O-ring Fixed Inside; Seal: Nitrile Rubber Nbr Approved Budget Cost: ₱278.00 / Pc 20 Pcs. 1”ø Hdpe Male Coupling Adapter Body: Polypropylene, High-grade Copolymer; Split Ring: Acetal; Liner: Acetal, O-ring Fixed Inside; Seal: Nitrile Rubber Nbr Approved Budget Cost: ₱167.00 / Pc 30 Pcs. 2”ø Hdpe Male Coupling Adapter Body: Polypropylene, High-grade Copolymer Split Ring: Acetal; Liner: Acetal, O-ring Fixed Inside; Seal: Nitrile Rubber Nbr Approved Budget Cost: ₱1,089.00 /pc 3 Pieces Of Universal Tape, 8” X 2” (please See Complete Specifications Below) Approved Budget Cost: ₱5,909.90 /pc 3 Pieces Of Universal Tape, 10” X 2” (please See Complete Specifications Below) Approved Budget Cost: ₱6,144.97 / Pc 3 Pieces Of Universal Tape, 12” X 2” (please See Complete Specifications Below) Approved Budget Cost: ₱6,378.65 / Pc X X X X X Ball Valve Specifications: The Elements Of The Valve Should Be Free From Dirt, And There Should Not Be Any Dirt, Chips, Burrs, Flakes, Etc. Before Assembling. -the Threaded Parts Of The Socket Should Be Coated With Sealing Glue. -the Valve Should Not Present Block To The Circulation Of Closing And Opening, And It Should Be Flexible. -when The Valve Is Fully Open, The Degree Of The Body Axis And Ball Axis Should Be Less Than 3 Degrees. A Seal Test Should Be Carried Out, And Testing Pressure Should Not Be Less Than 0.6 Mpa. -the Valve Should Be Turned Off During Delivery. Materials Body: Cw617n ; Bonnet: Cw617n Ball: Hpb57-3 ; Ball Seat: Ptfe Sm031 Stem: Hpb57-3 ; Handle: Hpb57-3 Elastic Cylindrical Pin: Stainless Steel Check Valve Specifications: Swing Check Valve: Resilient Seated With Closed Bushings Pressure Rating: ) Pn 10: 150 Psi For 2”ø To 12”ø ) Pn 16: 240 Psi For 2”ø X 12”ø Connection: Flanged And Drilling To Iso 7005-2 Test: Hydraulic Test To Bs 5153:1974 (1991) Seat: 1.1 X Pn Body: 1.5 X Pn Materials: Body, Bonnet And Hinge: Ductile Iron, Ggg-50, To Din 1693 (bs 2789, Grade 500-7) Coating: Electrostatically Applied Epoxy Resin To Din 30677 Internally And Externally Shaft: Stainless Steel Bonnet Gasket: Epdm Rubber Bushing: Brass, Dezincification-resistant Hexagon Bolt, Washer, And Pin: Stainless Steel A2 Resilient Seated Disc: Epdm Rubber With Steel Insert Swing Check Valve Dimensions And Weight (approximate) For Pn 10 And 16: Size / Diameter, Din Length (mm), Din Weight (kg) 3” (80mm) 260 20 4” (100mm) 300 26 6” (150mm) 400 51 8” (200mm) 500 83 Gate Valve (threaded) Specifications: Features: Brass Body, Non-rising Stem, Screw-over Bonnet, Threaded Ends Specifications: Nominal Pressure: Non-shock Working Pressure Max Working Pressure: 150 Psi Fitting To Withstand A Minimum Working Pressure Of 1.00 Thread Shall Be Npt The Waterway Shall Unobstructed When Fully Opened Material List Handwheel: Alloy; Packing Nut: Brass Bonnet: Brass; Stem: Brass Rod Wedge: Brass; Body: Brass Bonnet Gasket: Plastic; Packing: Teflon Universal Tapping Saddle Specifications: For All Kinds Of Pipe And Sizes Except Pe Pipe Tapping On Pa Adaptor Internally Threaded Threading To Bsp 1”, 3”, And 1” Use: For Water And Neutral Liquids To Max. 70°c Maximum Working Pressure: 16 Bar Materials: Saddle Upper Part: Ductile Iron, Ggg-50, To Din 1693 (bs 2789 Grade 500-7) With Rubber Liner Stirrup (lower Part): Stainless Steel A2 Coating: Electrostatically Applied Epoxy Resin To Din 30677 Internally And Externally; Stirrup Bushing: Stainless Steel 303; Adaptor: Polyamide Pa-11gf; Rubber Gasket: Nbr; Rubber Lining: Nbr; Bolts: Stainless Steel A2; Washer: Stainless Steel A2; Support Washer: Pe-hd Option: Bolt/washer: Stainless Steel A4; Adaptor: Blank (no Hole); Stirrup (lower Part): Other Brand Size / 100mm Band Width X X X X X Note: Not To Be Awarded On A One-lot Basis. This Is A Two-envelope System: Envelope “a” To Contain The Following, Among Others: A) A Refundable Bid Bond In The Form Of Cash, Manager's Or Cashier's Check Equivalent To 2% Or A Surety Bond Callable On Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission Equivalent To 5% Of The Total Approved Budget Cost Is Required For A Total Purchase Bid Amount Of ₱50,000.00 And Above. Validity Of The Surety Bond Is 120 Days From The Date Of Opening Of Bids Or Bid Securing Declaration Regardless Of The Amount Of Bid; B) Terms Of Payment, Delivery, Warranty, Bid Validity, And Complete Specifications; C) Brochure(s) (original); D) Proof Of Payment Of A Non-refundable Fee Of ₱5,000.00; Otherwise, Bids Shall Not Be Opened E) Certificate Of Authorized Distributorship / Dealership Issued By The Principal Supplier To The Participating Bidder (with Red Ribbon) If None Has Been Submitted To The Bac In Its Accreditation; ◦ For Bidders Who Have Principal Foreign Suppliers, The Bwd-bac Shall Accept An Apostilled Certificate Of Authorized Distributorship Dealership Issued By A Competent Authority The Host Government In Lieu Of The Certificate Of Authorized Distributorship / Dealership (with Red Ribbon), Except For Non-contracting Countries To The Apostille Convention, Which Still Require The Red Ribbon Requirement. ◦ For Locally Produced/manufactured Products, Only A Certificate Of Authorized Distributorship / Dealership Without A Red Ribbon Is Required If Applicable; F) Iso Certificate Issued To The Principal Supplier/participating Bidder For The Offered Material Or Equipment Brand Name (if None Has Been Submitted To The Bac In Its Accreditation); G) International Certificate Of Warranty. Envelope “b” To Contain The Bid Cost Per Unit.