City Government Iligan Tender

Description Invitation To Re-bid The Iligan City Government Bids And Awards Committee (bac), Through 20% Development Fund 2024, Intend To Apply The Sum Of P 2,037,186.56 Being The Approved Budget For The Contract (abc) To Payments Under The Contract Renovation Of Army Headquarters For Camp Pintoy, Brgy. Suarez, Iligan City With Project No. Cb(b)-24-018 (ceo-infra) Re-bid. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Iligan City Government Bids And Awards Committee Now Invites For The Supply And Delivery Of Items Below-stated: Particulars Renovation Of Army Headquarters For Camp Pintoy, Camp Pintoy, Barangay Suarez, Iligan City Scope Of Work • Demolition Of Dilapidated Structures And Structures For Replacement • Excavation And Gravel Filing For Footings, Septic Vault And Grease Trap • Concrete Works And Formworks For Footings, Countertop Sab, Sepic Vault Slabs And Grease Trap • Masonry Works For Footings, Countertop, Septic Vault, Grease Trap, And Wall Extensions * Steel Reinforcements For Concrete And Masonry Structures • Steel Works For Roof Framings And Purfins • Celling Works For Celing Frame And Celing Boards • Fabrication And Installation Of Doors, Windows And Glasswork • Fabrication Of Wooden Cabinets • Tinsmithry For Roofing Sheets, Ridge Roll And Fascia Cover • Tile Works For Comfort Room Tiles • Painting Works For Interior And Exterior Walls, Ceilings, And Primer For Steel Works • Plumbing Works For Waste And Water Lines • Electrical Works For Power Lines And Fixtures I. Project Billboard (q = 2.00 Sets) Includes 4' X 8' Tarpaulin, 8' X 8' Tarpaulin, 2"x 3°x 14* Coco Lumber, 2"x 3"x 10* Coco Ii. Lumber, 2* X 2* X 8' Coco Lumber, Assorted Sizes C.w. Nails. Ii. Occupational Safety And Health Program (q = 1.00 I.s.) Includes Safety Shoes, Safety Helmet, Safety Gloves, Specialized Ppe. Iii. Mobilization / Demobilization (q = 1.00 Lot) Iv. Demolition/removal Works (q = 1.00 Lot) Includes Demolition/removal Of Part Of Existing Wall In Armory And Storage Room To Extend Space For Conference Room; Demolition/removal Of Existing And Dilapidated Ceilings; Demolition/removal Of Existing And Dilapidated Doors And Windows; Demolition/ Removal Of Existing Roofing And Roof Framing Structures; Demolition Of Part Of Flooring In Armory And Storage Room For Chb Wall Footing And Zocalo; Demolition/removal Of Existing Girders For Chb Wall Extension; Demolition/removal Of Cr Tiles; Demolition Of Part Of Outside Flooring For Septic Vault; Removal Of Existing Painting On Chb Walls. V. Earthworks (q = 14.00 Cu.m.) A) Excavation (q=13.00 Cu.m.),indudes Volume To Be Excavated. B.) Gravel Bedding (q = 1.00 Cu.m.), Includes Volume For Gravel Bedding: 1-1/2" Gravel Bedding (0.10m Thk.) Vi. Concrete Works & Formworks (q = 2.40 Cu.m.) Indudes Portland Cement Type 1 Astm C-150 Pns 07, Washed Sand, Washed Gravel, 1/4" X 4' X 8' Marine Plywood, 2" X 3" X 14' Coco Lumber, 2" X 2" X 12' Coco Lumber, Assorted Sizes C.w. Nails. Vii. Masonry Works (q = 80.50 Sq.m.) Includes 4" X 8" X 16" Chb (700psi), Portland Cement Type 1 Astm C-150 Pns 07, Vii. Washed Sand, Skim Coat (20kg). Viii. Steel Reinforcements (q = 480.71 Kgs.) Includes 16 Mm® X 6000mm Dsb, Grade 40; 12 Mm® X 6000mm Dsb, Grade 40; 10 Mmo X 6000mm Dsb, Grade 40; #16 Gi Tie Wire. Ix. Steel Works (q = 246.00 Lengths) Includes 50mm X 50mm X 6mm Thk. Angle Bar (6m/length), 38mm X 38mm X 6mm Thk. Angle Bar (6m/length), 38mm X 38mm X 5mm Thk. Angle Bar (6m/length), 25mm X 25mm X 5mm Thk. Angle Bar (6m/length), 25mm X 6mm Thk. Flat Bar (6m/length), 50mm X 75mm X 12mm X 1.2mm Thk.c-purlins(6m/length), Welding Rod (6011), Grinding Disk, Cutting Disk. X. Ceiling Works (q = 201.00 Sq.m) Includes 3.5mm Thk X 4" X 8" Hardilite Board, Double Furring (0.60mm Thk. X 17 X 49 X 17 × 5.00m), Blind Rivets, 1" X 1" X8' Wooden Sticks (for Air Vent Frame), 1.2m X 1m . Insect Screen, Concrete Nails (1-1/2"). Xi. Doors & Windows (q = 19.00 Units) Includes Di: 900mm X 2050mm Per Panel, Two Panels Swing Glass Door In Aluminum Framing, Including Aluminum Door Jamb, Lock, Knob And Accessories; D2: 800mm X 2050mm Wooden Flush Door, Including Door Knob, Jambs And Accessories; D3: 700mm X 2050mm Wooden Flush Door, Including Door Knob, Jambs And Accessories; D4: 600mm X 2050mm Plastic Polydoor (heavy Duty) Including Door Knob, Jamb And Accessories; W1: 1200mm X 2350mm (8 - 1200mm X 294mm Panels) Aluminum Framed Glass Casement Window; W2: 1200mm X 1850mm (6 - 1200mm X 308mm Panels) Aluminum Framed Glass Casement Window; W3: 1200mm X 1200mm (6 - 1200mm X 300mm Panels) Aluminum Framed Glass Casement Window; W4: 800mm X 2100mm Aluminum Framed Fixed Glass Pane; W5: 280mm X 800mm (4 - 280mm X 200mm Panels) Aluminum Framed Glass Casement Window. Xii. Carpentry Works (q = 1.00 Lot) Includes 4' X 8' X 3/4" Thk Marine Plywood, 30mm X 30mm Cabinet Corner Metal Bracket (10pcs/pack), 10" X 12" L-shaped Wall Angle Bracket, Cabinet Concealed Hinges, Cabinet Xiii. Handles, Wood Screw 3/4" (250pcs/box), Concrete Nails (1-1/2). Xiii. Tinsmithry (q = 1.00 Lot) Includes 1.1m X 5.5m X 0.50mm Thk Prepainted Long Span Rib-type Roofing Sheet, 2.4m X 0.5mm Thk Prepainted Prefab Ridge Roll, 0.3m X 2.4m X 0.5mm Thk Prepainted Prefab Fascia Cover, Tek Screw, Blind Rivets, Vulca Seal, 50mm Thk X 1000mm Insulation Foam (50m/roll), Touch-up Paint, #16 G.i. Tie Wire. Xiv. Tile Work (q = 8.73 Sq.m.) Includes 300mm X 300mm Non-glazed Ceramic Floor Tiles, 300mm X 300mm Glazed Ceramic Wall Tiles, Tile Adhesive (25kg, Heavy Duty), Tile Grout (2kg). Xv. Painting (q = 1,044.69 Sq.m.) Includes Flat White Latex Paint, Latex Paint (semi-gloss), Red Oxide Primer, Quick Drying Enamel Paint, Liquid Tile Case, Plasolux Glazing Putty, Paint Thinner (mayon), Roller Paint Brush W/tray And Handle, Paint Brush (3-1/2"), Paint Brush (1"), Sand Paper (assorted Sizes) Xvi. Plumbing (q = 1.00 Lot) Includes Water Closet With Complete Fittings And Accessories (american Standard), Kitchen Sink With Complete Fittings And Accessories, 4"x 4" Floor Drain (stainless), Faucet (us Patented), 4"dia. Pvc Sanitary Tee, 4"dia. Pvc Wye, 4" Dia. Pvc P-trap, 4" Dia. Pvc Cleanout Plug, 4" Dia. Pvc Elbow (1/4 Bend), 4" Dia. Pvc Coupling, 4" Dia. X 10* Pvc Pipe (s-1000), 2" Dia. X 10' Pvc Pipe (5-1000), 4" To 2" Dia. Pvc Tee Reducer, 2" Dia. Pvc Cleanout, Pvc Cement (400 Cc), 1/2" Dia. G.i. Elbow, 1/2" Dia. G.i. Tee, 1/2" Dia. X 4" G.i. Nipple, 1/2" Dia. G.i. Union, 1/2" Dia. X 20' G.i. Pipe (s-40), 1/2* Dia. G.i. Coupling, 1/2" Dia. Gate Valve, Tefion Tape (big). Xvii. Electrical (q = 1.00 Lot) Includes Recessed Trofffer Housing (for 1 X 18w Led Tube), Led Tube 18w (daylight), Ceiling Receptace, 4-1/4" ® With Led 3w Bulb E-27, Ceiling Receptacle, 4-1/4° © With Led 13w Bulb E-27, Recessed Ceilling Downlight 7w Led Square Lamp 25cm X 25cm, Switch (1-gang W/ Led Indicator, Flush Type), Switch (2-gang W/ Led Indicator, Flush Type), Switch (3-gang W/ Led Indicator, Flush Type), Switch (3-way W/ Led Indicator, Flush Type), Universal Outlet (duplex 10a, 230v), Aircon Outlet 3-prong (230v 60hz), 2.0 Mm? Thw Copper Wire, 3.5 Mm? Thw Copper Wire, 5.5 Mm? Thw Copper Wire, 30 Mm? Thw Copper Wire, Pvc Electrical Conduit Pipe (1/2"0x3m), Pvc Flexible Corrugated Conduit (1/2"®), Pvc Male Adaptor With Locknut (1/2"®), Pvc Flexible Connector W/locknut (1/2"), Pvc Coupling (1/2"), Pvc Clamp (1/2"®), Pvc Elbow (1/2 0), Emt Conduit Pipe (1-1/4"®x10'), Emt Clamp (1-1/4"®), Emt Male Threaded Adaptor (1-1/4"®), Junction Box, Pvc Octagonal W/ Cover (4"x4"), Utility Box, 2"x4" (pvc Depth Type), Tie Wire Gi #16, Pvc Adhesive Cement, Electrical Tape (3m, Big), Service Entrance Cap (1-1/4"® With Screw), Secondary Rack (2-pole Insulator Spool), Panel Board (america, Plug-in Type, 12-hole 2-pole), Circuit Breaker (2-pole, 15), Circuit Breaker (2-pole, 20a), Circuit Breaker (2-pole, 30), Circuit Breaker (2-pole, 125a, Main Breaker), Circuit Breaker (2-pole, 125a, Disconnecting Switch), Enclosure Nema 3r (for 125a, Disconnecting Switch) Approved Budget For The Contract (abc): P 2,037,186.56 Required Bid Security: 2% Of The Abc If Cash, Manager’s Check; Bank Draft/guarantee, Irrevocable Letter Of Credit Confirmed Or Authenticated By A Universal Or Commercial Bank; And 5% Of The Abc If Surety Bond Callable Upon Demand Issued By A Surety Or Insurance Company Duly Certified By The Insurance Commission As Authorized To Issue Such Security Delivery Period Is Within One Hundred Seven (107) Calendar Days From Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Three (3) Year From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information From Iligan City Government And Inspect The Bidding Documents During Office Hours From 8:00 A.m. – 12:00 P.m. And 1:00 P.m. – 5:00 P.m. At The Office Of The Bids And Awards Committee, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City. The Complete Schedule Of Activities Is Listed, As Follows: Activities Schedule 1.pre-procurement: March 26,2024- 9:30 Am At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Palao, Iligan City 2.issuance Of Bid Documents: May 14 – June 4, 2024 – 8:00 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Palao, Iligan City 3.pre-bid Conference: May 21, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 4.submission Of Bids: June 4, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City 5.opening Of Bids: June 4, 2024 – 9:30 A.m. At Casimero P. Cabigon Hall, 2nd Floor City Hall Main Bldg., Buhanginan Hills, Pala-o, Iligan City A Complete Set Of Bidding Documents Will Be Available To Prospective Bidders Upon Payment Of A Non-refundable Amount Of P 5,000.00 To The Iligan City Government Cashier, At The Bac Office, 2nd Floor, City Hall Main Building, Buhanginan Hills, Pala-o, Iligan City. The Iligan City Government Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Furthermore, The City Government Of Iligan Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expense Or Loss Incurred In The Preparation And Submission Of The Eligibility Statements And Bids. Approved By: (signed)darwin J. Manubag, Phd. Bac Chairman Date Of Advertisement/posting: May 14,2024 Place Of Posting/advertisement: City Hall/ibjt Bulletin Boards, Iligan Official Website, Phil-geps Itb No. Cb-24-018 (ceo-infra)