Chair Tenders

Details: Description Request For Quotation Date: November 14, 2024 Quotation No: 2024-11-130 To All Eligible Suppliers: The Schools Division Of Palawan, Through Its Bids And Awards Committee (bac), Intends To Procure A Procurement Of Hotel Accommodation (fullboard) Including The Venue And The Use Of Facilities And Amenities And Venue And Meals For The Conduct Of “division Capacity-building For Career Guidance Program (cgp) Implementers – Guidance Counselor, Designates And Advocates Cum Mental Health And Psychosocial Support Services (mhpss) Training” With An Approved Budget For The Contract Eight Hundred Sixty-nine Thousand Pesos ( Php 869,000.00) Through Section 53.9 (negotiated Procurement -small Value Procurement) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. Please Quote Your Lowest Price Inclusive Of Vat On The Item/s Listed Below, Subject To The Terms And Conditions Of The Rfq, And Submit Your Quotation Duly Signed By Your Representative Not Later Than 9:00 Am Of November 25, 2024, At 3rd Floor Bac Office, Deped Building, Sdo Palawan C/o Rafael G. Manalo, Phd, Bac Chairperson, Gov. Salvador P. Socrates Gov’t Center, Bancao-bancao, Puerto Princesa City. For More Information, Please Contact The Bac At (048) 433-6392. The Prospective Supplier Shall Be Responsible For Verifying The Quoted Items. Rafael G. Manalo, Phd Assistant Schools Division Superintendent Chairperson, Bids And Awards Committee For The Bac Chairperson: (sgd) Rodel S. Magnaye Assistant Schools Division Superintendent Co-chairperson, Bids And Awards Committee I. Project Title: Procurement Of Hotel Accommodation (fullboard) Including Venue And The Use Of Facilities And Amenities And Venue And Meals For The Conduct Of “division Capacity-building For Career Guidance Program (cgp) Implementers – Guidance Counselor, Designates And Advocates Cum Mental Health And Psychosocial Support Services (mhpss) Training” No. Items And Description Qty. Unit Statement Of Compliance (state “comply” Or “not Comply” Unit Price Total Price Procurement Of Room Accommodation With Complete Full Meals (breakfast, Am Snacks, Lunch, Pm Snacks & Dinner) For The First Two (2) Days And Meals (am Snacks, Lunch And Pm Snacks) For One (1) Day, Including The Use Of Hotel Facilities And Amenities For The Conduct Of Division Capacity-building For Career Guidance Program (cgp) Implementers-guidance Counselor, Designates And Advocates Cum Mental Health And Psychosocial Support Services (mhpss) Training For Career Guidance Implementers On December 15-17,2024 At Puerto Princesa City, Palawan 185 Pax Procurement Of Complete Full Meals (breakfast, Am Snacks, Lunch, Pm Snacks & Dinner) For The First Two (2) Days And Meals (am Snacks, Lunch And Pm Snacks) For One (1) Day, Including The Use Of Hotel Facilities And Amenities For The Conduct Of Division Capacity-building Career Guidance Program (cgp) Implementers- Guidance Counselor, Designates And Advocates Cum Mental Health And Psychosocial Support Services (mhpss) Training For Puerto Princesa -based Program Management Team/training Officials On December 15-17,2024 At Puerto Princesa City, Palawan. (no Accommodation) 6 Pax 1. Daily Serving Meals- (soup Or Appetizer, 2 Main Dish, Side Dish, Dessert And Beverage) Breakfast (7:00-8:30 Am), Lunch (12:00-1:00 Pm) And Dinner (5:30-7:00 Pm). First Meal Will Be Am Snacks Of December 15,2024 While The Last Meal Will Be Pm Snacks December 17,2024. 2. Plated Service Snacks (am&pm) @ 9:00-9:30 Am And 3:00-3:30 Pm) 3. Activity Signage At The Lobby 4. Free Flowing Coffee, Tea Or Milo In Sachet And Standby Drinking Water In The Function Hall. 5. Standby Enough Number Of Food Attendants To Facilitate The Efficient Serving Of Meals And Snacks. 6. Free Meals And Snacks For Standby Medical Personnel, Training Officials (selected Sdo Personnel) And Resources Speakers-seven (9) Pax 7. One (1) Free Of Charge Room For Secretariat And Training Materials 8. One (1) Free Of Charge Room For Resource Speakers. 9. Accommodation Must Be Single Bed Per Pax, And Maximum Of Three (3) Pax Per Room. 10. One (1) Well-lighted And Ventilated Function Hall With Tables, That Is Comfortable And Can Accommodate 200 Participants, Resource Speakers & Training Officials. 11. Two (2) Lcd Projector And Sound System For The Function Hall. Equipment Should Be In Very Good Condition. 12. Four (4) Units Wireless Microphone (2 Of Which Is Should Have Stand And Placed Near The Participants) 13. Free Fast And Efficient Wifi Connection. 14. Set Of Tables And Chairs Good For Three (3) Persons Outside The Plenary Hall For The Registration Team, Secretariat And Medical Team During The Duration Of The Conference. 15. Standby Generator Set In Case Of Brownout 16. Standby Focal Persons (hotel Contact Person) 17. Venue Must Be Located Within Puerto Princesa City 18. Free 4 X 8 Feet Tarpaulin Approved Budget For The Contract (abc) Php 869,000.00 Delivery Period: Three (3) Days Total This Is To Submit Our Price Quotations As Included Above, Subject To The Terms And Conditions Of The Rfq. Supplier’s Company Name: Tin: Address: Telephone: Cp No.: E-mail: Supplier’s Authorized Representative Signature Over Printed Name: Date: I. Terms And Conditions A. Submission Of Requirements 1. Sealed Quotations And Other Requirements Below Shall Be Submitted To The Bids And Awards Committee (bac) Secretariat At 3rd Floor, Deped Building, Schools Division Office Of Palawan, Gov. Salvador P. Socrates Gov’t Center, Bancao-bancao, Puerto Princesa City. 2. Interested Supplier Shall Submit The Following Requirements: A. Letter Of Intent To Participate In The Said Procurement. B. Duly Signed Request For Quotation. Prices Shall Be Quoted In Philippine Pesos. Statement Of Compliance Must Be Accomplished By The Supplier. C. Documentary Requirements Of The Following: 1. Dti Certificate Of Registration 2. Valid Mayor’s Permit 3. Tax Clearance 4. Bir Certification 5. Philgeps Registration 6. Notarized Omnibus Sworn Statement Bidder’s Failure To Submit Such Documents Upon Opening Shall Be Ground For Disqualification. B. Award The Supplier Who Submitted The Lowest Calculated And Responsive Quotation Shall Be Awarded The Purchase Order/contract After Evaluation By The Bac. C. Delivery Of Services 1. Delivery Of Services Shall Be Made On The Schedule Date Upon Receipt Of Purchase Order/contract. 2. Upon Delivery Of The Services, The Supplier Shall Notify The Purchaser And Present The Following Document/s To The Purchaser: A. Original And Copy Of The Supplier’s Statement Of Account. D. Evaluation Of Quotations Quotations Shall Be Compared And Evaluated Based On The Following Criteria: 1. Completeness Of Submission. 2. Compliance With Technical Specifications; And 3. Price E. Instructions 1. The Supplier Shall Be Responsible For All The Services To Be Rendered And Should Be In Accordance With The Schedule And Specifications Stipulated In The Contract/purchase Order. Failure Of The Supplier To Comply With This Provision Shall Be Grounds For Cancellation Of The Contract/purchase Order Issued To The Supplier. 2. Supplier Shall Pick Up The Purchase Order/contract Issued In Its Favor Within Three (3) Calendar Days From Receipt Of Notice To The Effect. A Telephone Call Or Fax Transmission Shall Constitute An Official Notice To The Supplier. Thereafter, If The Purchases Order Remains Unclaimed, The Purchase Order Shall Be Canceled. To Avoid Delay In The Delivery Of The Requesting Agency’s Requirements, All Defaulting Supplier Shall Be Precluded From Proposing Or Submitting Substitute Quotation (s) Or Item (s). 3. A Supplier Who Accepted A Purchase Order/contract But Failed To Deliver The Required Goods/services Within The Time Called For In The Purchase Order/contract Shall Be Disqualified From Participating In Deped Or Any Of Deped Unit’s Future Procurement Activities. This Is Without Prejudice To The Imposition Of Other Sanctions Prescribed Under R.a 9184 And Its Irr-a Against The Supplier. 4. The Supplier Shall Pay All Duties, Excise, And Other Taxes And Revenue Charges. 5. All Transactions Are Subject To Withholding Of Credible Value-added Tax And/or Expanded Value – Added Tax Per Revenue Regulation(s) Of The Bureau Of Internal Revenue. F. Payment One Hundred Percent (100%) Of The Contract Price Less Government Tax Shall Be Paid To The Supplier After Completion/compliance Of The Services Delivered. Payment Shall Be In The Form Of A Check And Addressed To The Supplier’s Name Firm. After Carefully Reading Your Request For Quotation And Its Terms And Conditions, I/we Quote You On The Item/s At The Price Noted In The Rfq. The Quotation Shall Be Binding Upon Us For Thirty (30) Calendar Days Reckoned From The Last Day Of Submission Indicated In The Submission Requirements. We Shall Accept The Corresponding Award On Purchase Order At Any Time Before The Expiration Of This Period

Details: Description Republic Of The Philippines Province Of Iloilo Bids And Awards Committee Request For Quotation Quotation No.gso-24-1869-np(sv) Reference Pr No.gso-24-1869 November 15, 2024 _______________________________ _______________________________ (supplier's Name And Office Address) The Iloilo Provincial Government, Through Its Bids And Awards Committee (bac), Hereby Invites All Interested Supplier/distributor To Quote Their Lowest Price On The Item/s Listed Below Subject To The Terms And Conditions Stated Herein, Stating The Shortest Time Of Delivery, And Submit The Same Duly Signed By Their Authorized Representatives Not Later Than November 27, 2024 At 9:00 A.m. At 5th Floor, Bac Secretariat Office, Iloilo Provincial Capitol, Bonifacio Drive, Iloilo City After Payment Of The Rfq Form In The Amount Of Five Hundred Pesos (₱500.00). Atty. Dennis T. Ventilacion Chairperson, Bac Approved Budget For The Contract: ₱72,600.00 Place Of Delivery: Any Hotel Within Iloilo City. Date Of Delivery: From Receipt Of Notice To Proceed Until December 31, 2024. X Complete Bid Partial Bid Item No. Quantity Unit Of Issue Description Estimated Unit Cost Brand Unit Cost Total Cost 1 22 Pax Food And Accommodation For The Planning And Target Setting For Cy 2025 Of General Services Office For 22 Pax At Php 3,300.00 By The Gso Division Chiefs With Its Key Personnel, In Any Hotel In Iloilo City To Be Conducted Not Later Than December 31, 2024 Day 1 Am Snacks: Lomi Soup With Pandesal, Soda/juice Lunch: Manok With Ubad, Beef Kare-kare, Crispy Tilapia With 4 Kinds Of Sauce, Pinakbet With Kawali Bits, Mango Float, Steamed Rice, Fresh Fruits In Season, Soda/juice Pm Snacks: Chicken Empanada, Soda/juice Dinner: Kadyos Baboy Langka, Orange Chicken, Salt & Pepper Squid,moussaka (potato, Eggplant, Ground Beef), Buko Pandan, Steamed Rice, Fresh Fruits In Season, Soda/juice 3,300.00 Day 2 Breakfast: Choice Of Rice, Hotdog, Egg, Chorizo, Corned Beef, Tocino, Fresh Fruits In Season, Soda/juice, Coffee/hot Choco Am Snacks: Cheesy Ensaymada With Potato Chips, Soda/juice Lunch: Beef Bulalo, Stir Fried Vegetables, Steamed Chicken With Shitake Mushroom, Fish With Tausi, Ube Cake, Steamed Rice, Fresh Fruits In Season, Soda/juice Terms And Conditions: 1. Set Up Of Skirted Tables With Dining Wares 2. Assisted Buffet 3. Free Flowing Coffee 4. Use Of Whiteboard With Marker And Eraser 5. Use Of Microphone, Sounds And Lights 6. Use Of Projector And Projector Screen 7. Use Of Table And Chairs 8. Use Of Swimming Pool Kindly Indicate The Delivery Period And Bid Amount In Words And Figures In The Space Provided Below. Non-compliance Shall Be A Ground For Disqualification. Total Bid Amount In Figures: ₱_________________ Statement Of Delivery Period: ________________________________________________________________ Bid Amount In Words: ______________________________________________________________________ Kindly Indicate The Rfq Number And Date Of Opening Of Bids On The Outside Of The Envelope And Submit This Quotation With The Following Requirements: 1. Mayor's/business Permit; 2. Philgeps Registration Number For The Alternative Methods Of Procurement Under Section 50, Section 52.1 (b), Section 53.3, Section 53.6, Section 53.7, Section 53.9, Section 53.10, And Section 53.11 Of The Revised Irr Of R.a. No. 9184; 3. Income/business Tax Return For The Procurement Projects With Abc Above ₱500,000.00; 4. Notarized Omnibus Sworn Statement Specifying The Rfq Number For Procurement Projects With Abc Above ₱50,000.00; 5. Dti/sec/cda Registration Certificate; 6. Notarized Authority Of The Signatory, If Representative (spa Of Proprietor For Single Proprietorship/secretary Certificate For Corporation); 7. Technical Specifications In The Prescribed Form (for Non-expendables/non-consumables) 8. Schedule Of Requirements/delivery Period In The Prescribed Form; 9. After-sales Service/parts (for Goods Requiring Maintenance Service/parts); 10. Manpower Requirements (for The Procurement Of Projects With Labor Component); 11. Financial Proposal In The Prescribed Form; 12. Active Email Address Or Working Fax Number. Absence Of Both Is A Ground For The Rating Of Its Bid As "failed" Or "disqualified." 13. For Easy Validation During The Post-qualification In The Procurement Of Drugs And Medicines And Medical Equipment/supplies, The Bidders Shall Submit The Following: A. Certificate Of Product Registration From The Fda; B. Certificate Of Good Manufacturing Practice From The Fda; C. Batch Release Certificate From The Fda; D. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/dealer Of The Products /items; And E. For The Procurement Of Regulated Drugs, The Applicable Type Of S-license S-1, S-3 (retailer) S-4 (wholesaler) S-5c (manufacturer) S-5d (bulk Depot/storage) S-5e S-5i (importer) F. License To Operate (lto) Issued By Fda, If Applicable; G. After-sales Services/parts, If Applicable; H. Manpower Requirements, If Applicable. 14. For The Procurement Of Infrastructure Projects, Bidders Must Submit A Valid Philippine Contractors Accreditation Board (pcab) License And Indicate Compliance With The Manpower Requirements. Province Of Iloilo Bids And Awards Committee Request For Price Quotation No. Gso-24-1869-np(sv) Reference Pr No. Gso-24-1869 Terms And Conditions: 1. All Entries Must Be Filled-up, Written, Or Printed Legibly. Failure To Use This Form Will Result To Disqualification Of Your Bid. 2. Delivery Period: From Receipt Of Notice To Proceed Until December 31, 2024. 3. Bids And Bid Securities Shall Be Valid For One Hundred Twenty (120) Calendar Days From The Date Of The Opening Of Bids. 4. Bids Exceeding From The Approved Budget For The Contract (abc) Shall Be Disqualified. 5. The Participating Bidder/supplier Or An Authorized Representative Must Indicate An Email Address Or Working Fax Number. Notice To The Bidder Through Either Of These Means (email/working Fax Number) Is Considered Sufficient Notice. 6. The Supplier/awardee(s) Must Conform To The Notice Of Award Within Three (3) Calendar Days From Notice Of Such Award And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award. Otherwise, The Award Shall Be Forfeited Or Cancelled. 7. The Awardee Shall Be Responsible For The Source(s) Of His Supplies, Materials, Equipment And Shall Make Deliveries In Accordance With The Schedule, Quality And Specifications Of Award And Purchase Order. Failure Of The Awardee To Comply With The Same Shall Be Ground For The Cancellation Of The Award And Purchase Order Issued To The Awardee. 8. All Deliveries By Suppliers Shall Be Subject To Inspection And Acceptance By The Representative Of The General Services Office And End User. 9. Rejected Deliveries Shall Be Construed As Non-delivery Of The Product(s)/item(s) So Ordered And Shall Be Subject To Liquidated Damages, Subject To The Terms And Conditions Prescribed Under Paragraph 10 Hereof. 10. Supplier Shall Guarantee His Deliveries To Be Free From Defects. Any Defective Item(s)/product(s) Therefore That May Be Discovered By The End-user Within The Warranty Period After Acceptance Of The Same Shall Be Replaced By The Supplier Within Seven (7) Calendar Days Upon Receipt Of A Written Notice To That Effect. 11. Performance Security Or Warranty Security, As The Case May Be, Shall Be Required From The Winning Bidder In Accordance With The Provisions Of R.a. No. 9184 And Its Revised Implementing Rules And Regulations. 12. When An Occurrence Of A Tie Among Bidders Takes Place, I.e., Two Or More Of The Bidders Are Determined And Declared As The Lowest Calculated And Responsive Bidder (lcrb), The Winning Bidder Shall Be Determined By Draw Lots Upon Notice To The Bidders Concerned And/or Their Authorized Representatives In Accordance With The Relevant Circulars Issued By The Government Procurement Policy Board (gppb). 13. The Supplier Must Indicate Its Complete Business/mailing Address. Otherwise, The Lack Thereof Is A Ground For Disqualification. 14. All Offers/quotations Must Be Properly Sealed And Marked In Envelopes. Unsealed Or Unmarked Envelopes Shall Be Rejected. 15. The Printed Name And Signature Of The Bidder/supplier Or Of Its Authorized Representative Must Be Legible And Verifiable And Must Indicate His/her Position. Non-compliance Is A Ground For Disqualification. 16. Bidders Shall Prepare An Original Of The Documentary Requirements For Negotiated Procurement. In Addition, Bidders Shall Submit Separate Copies Thereof (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. Non-compliance Shall Be A Ground For Declaration Of Failure/disqualification. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail. I Hereby Certify That I Have Issued This Request For Quotation (rfq) To A Bonafide Supplier. _______________________________ Signature Over Printed Name Of End User/bac Secretariat Focal Person ______________________________ Signature Over Printed Name ______________________________ Position ______________________________ Firm/company Name ______________________________ Office Address And Contact Number

Details: Description Republic Of The Philippines Province Of Iloilo Bids And Awards Committee Request For Quotation Quotation No. Ppd-24-1914-np(sv) Reference Pr No. Ppd-24-1914 November 19, 2024 ________________________________ ______________________________ ______________________________ (supplier's Name And Office Address) The Iloilo Provincial Government, Through Its Bids And Awards Committee (bac), Hereby Invites All Interested Supplier/distributor To Quote Their Lowest Price On The Item/s Listed Below Subject To The Terms And Conditions Stated Herein, Stating The Shortest Time Of Delivery, And Submit The Same Duly Signed By Their Authorized Representatives Not Later Than November 25, 2024, At 9:00 A.m. At The Bids And Awards Committee-secretariat, 5th Floor, Iloilo Provincial Capitol, Iloilo City After Payment Of The Rfq Form In The Amount Of Five Hundred Pesos (₱500.00). Atty. Dennis T. Ventilacion Chairperson, Bac Approved Budget For The Contract: ₱150,000.00 Place Of Delivery: Hotel Within Iloilo City Date Of Delivery: As Per The Scheduled Date Of Activity. X Complete Bid Partial Bid Item No. Quantity Unit Of Issue Description Estimated Unit Cost Brand Unit Cost Total Cost 1 1 Job Food And Accommodation Services For The Conduct Of Partnership In Developing Inclusive Programs, Projects, For Sustainable Progress For 3 Days & 2 Nights For 30 Pax @ Php 5,000.00/pax Date: Not Later Than December 31, 2024 Venue: Hotel Within Iloilo City 150,000.00 Day 1 Am Snacks: Chicken Sandwich With Chips, Soda Lunch: Crab And Corn Soup, Honey Bourbon Ribs, Herbed Roasted Chicken, Sauteed Mixed Veggies, Buko Pandan, Rice, Soda Pm Snacks: Arroz Caldo, Drinks Dinner: Spinach Soup, Sweet And Sour Fish Fillet, Chicken Cordon Bleu, Veggie Fritters, Rice, Drinks, Black Gulaman With Lychee Day 2 Breakfast: Menu Of The Day Am Snacks: Ensaymada, Drinks Lunch: Minced Beef Soup, Pork Hamonado, Fried Boneless Bangus, Chopsuey, Fruit Salad, Rice, Drinks Pm Snacks: Lomi With Bread, Drinks Dinner: Cream Of Corn Soup, Beef Tips With Mushroom, Chicken Hawaiin, Thai Spring Roll, Revel Bar, Rice, Drinks Day 3 Beakfast: Menu Of The Day Am Snacks: Baked Macaroni, Drinks Lunch: Laswa (garden Vegetable Soup), Beef Teriyaki, Porkloin With Mushroom, Bam-i, Mango Float, Rice, Drinks Pm Snacks: Batchoy With Kinihad, Drinks Terms And Conditions: 1. Assisted Buffet With Tables And Chairs Set-up 2. The Use Of Low-density Plastics And Styrofoam As A Food Container Or Wrapper Shall Not Be Allowed Except As First Packaging; 3. Caterers Are Required To Use Table Napkins, Banana Leaves And Other Biodegradable/ Organic Materials To Wrap/package The Food Items; 4. Refillable Water Containers Shall Be Provided Instead Of Individual Bottled Water 5. Caterers Are Required To Provide Glass, Paper, Or Reusable Cups For Drinking Coffee And Other Beverages; 6. Use Of Plastic Straws And Plastic Stirrers Is Strictly Prohibited Kindly Indicate The Delivery Period And Bid Amount In Words And Figures In The Space Provided Below. Non-compliance Shall Be A Ground For Disqualification. Total Bid Amount In Figures: ₱_________________ Statement Of Delivery Period: __________________________________________________ Bid Amount In Words: ____________________________________________________________ Kindly Indicate The Rfq Number And Date Of Opening Of Bids On The Outside Of The Envelope And Submit This Quotation With The Following Requirements: 1. Mayor's/business Permit; 2. Philgeps Registration Number For The Alternative Methods Of Procurement Under Section 50, Section 52.1 (b), Section 53.3, Section 53.6, Section 53.7, Section 53.9, Section 53.10, And Section 53.11 Of The Revised Irr Of R.a. No. 9184; 3. Income/business Tax Return For The Procurement Projects With Abc Above ₱500,000.00; 4. Notarized Omnibus Sworn Statement Specifying The Rfq Number For Procurement Projects With Abc Above ₱50,000.00; 5. Dti/sec/cda Registration Certificate; 6. Notarized Authority Of The Signatory, If Representative (spa Of Proprietor For Single Proprietorship/secretary Certificate For Corporation); 7. Technical Specifications In The Prescribed Form (for Non-expendables/non-consumables) 8. Schedule Of Requirements/delivery Period In The Prescribed Form; 9. After-sales Service/parts (for Goods Requiring Maintenance Service/parts); 10. Manpower Requirements (for The Procurement Of Projects With Labor Component); 11. Financial Proposal In The Prescribed Form; 12. Active Email Address Or Working Fax Number. Absence Of Both Is A Ground For The Rating Of Its Bid As "failed" Or "disqualified." 13. For Easy Validation During The Post-qualification In The Procurement Of Drugs And Medicines, Bidders Are Encouraged To Submit The Following: A. License To Operate From The Food And Drug Administration (fda); B. Certificate Of Product Registration From The Fda; C. Certificate Of Good Manufacturing Practice From The Fda; D. Batch Release Certificate From The Fda; E. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/dealer Of The Products /items; And F. For The Procurement Of Regulated Drugs, The Applicable Type Of S-license S-1, S-3 (retailer) S-4 (wholesaler) S-5c (manufacturer) S-5d (bulk Depot/storage) S-5e S-5i (importer) 14. For The Procurement Of Infrastructure Projects, Bidders Must Submit A Valid Philippine Contractors Accreditation Board (pcab) License And Indicate Compliance With The Manpower Requirements. Province Of Iloilo Bids And Awards Committee Request For Price Quotation No. Ppd-24-1914-np(sv) Reference Pr No. Ppd-24-1914 Terms And Conditions: 1. All Entries Must Be Filled-up, Written, Or Printed Legibly. Failure To Use This Form Will Result To Disqualification Of Your Bid. 2. Delivery Period: As Per The Scheduled Date Of Activity. 3. Bids And Bid Securities Shall Be Valid For One Hundred Twenty (120) Calendar Daysfrom The Date Of The Opening Of Bids. 4. Bids Exceeding From The Approved Budget For The Contract (abc) Shall Be Disqualified. 5. The Participating Bidder/supplier Or An Authorized Representative Must Indicate An Email Address Or Working Fax Number. Notice To The Bidder Through Either Of These Means (email/working Fax Number) Is Considered Sufficient Notice. 6. The Supplier/awardee(s) Must Conform To The Notice Of Award Within Three (3) Calendar Days From Notice Of Such Award And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award. Otherwise, The Award Shall Be Forfeited Or Cancelled. 7. The Awardee Shall Be Responsible For The Source(s) Of His Supplies, Materials, Equipment And Shall Make Deliveries In Accordance With The Schedule, Quality And Specifications Of Award And Purchase Order. Failure Of The Awardee To Comply With The Same Shall Be Ground For The Cancellation Of The Award And Purchase Order Issued To The Awardee. 8. All Deliveries By Suppliers Shall Be Subject To Inspection And Acceptance By The Representative Of The General Services Office And End User. 9. Rejected Deliveries Shall Be Construed As Non-delivery Of The Product(s)/item(s) So Ordered And Shall Be Subject To Liquidated Damages, Subject To The Terms And Conditions Prescribed Under Paragraph 10 Hereof. 10. Supplier Shall Guarantee His Deliveries To Be Free From Defects. Any Defective Item(s)/product(s) Therefore That May Be Discovered By The End-user Within The Warranty Period After Acceptance Of The Same Shall Be Replaced By The Supplier Within Seven (7) Calendar Days Upon Receipt Of A Written Notice To That Effect. 11. Performance Security Or Warranty Security, As The Case May Be, Shall Be Required From The Winning Bidder In Accordance With The Provisions Of R.a. No. 9184 And Its Revised Implementing Rules And Regulations. 12. When An Occurrence Of A Tie Among Bidders Takes Place, I.e., Two Or More Of The Bidders Are Determined And Declared As The Lowest Calculated And Responsive Bidder (lcrb), The Winning Bidder Shall Be Determined By Draw Lots Upon Notice To The Bidders Concerned And/or Their Authorized Representatives In Accordance With The Relevant Circulars Issued By The Government Procurement Policy Board (gppb). 13. The Supplier Must Indicate Its Complete Business/mailing Address. Otherwise, The Lack Thereof Is A Ground For Disqualification. 14. All Offers/quotations Must Be Properly Sealed And Marked In Envelopes. Unsealed Or Unmarked Envelopes Shall Be Rejected. 15. The Printed Name And Signature Of The Bidder/supplier Or Of Its Authorized Representative Must Be Legible And Verifiable And Must Indicate His/her Position. Non-compliance Is A Ground For Disqualification. 16. Bidders Shall Prepare An Original Of The Documentary Requirements For Negotiated Procurement. In Addition, Bidders Shall Submit Separate Copies Thereof (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. Non-compliance Shall Be A Ground For Declaration Of Failure/disqualification. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail.

Details: Description Request For Quotation Date: November 7, 2024 Quotation No: 2024-11-124 To All Eligible Suppliers: The Schools Division Of Palawan, Through Its Bids And Awards Committee (bac), Intends To Procure A Regional Training-workshop On Establishing Functional Child Protection Committees In Schools-batch 1 With An Approved Budget For The Contract Five Hundred Seventy-six Thousand Pesos (php 576,000.00) Through Section 53.9 (negotiated Procurement -small Value Procurement) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184. Please Quote Your Lowest Price Inclusive Of Vat On The Item/s Listed Below, Subject To The Terms And Conditions Of The Rfq, And Submit Your Quotation Duly Signed By Your Representative Not Later Than 9:00 Am Of November 25, 2024, At 3rd Floor Bac Office, Deped Building, Sdo Palawan C/o Rafael G. Manalo, Phd, Bac Chairperson, Gov. Salvador P. Socrates Gov’t Center, Bancao-bancao, Puerto Princesa City. For More Information, Please Contact The Bac At (048) 433-6392. The Prospective Supplier Shall Be Responsible For Verifying The Quoted Items. (sgd) Rafael G. Manalo, Phd Assistant Schools Division Superintendent Chairperson, Bids And Awards Committee I. Regional Training-workshop On Establishing Functional Child Protection Committees In Schools-batch 1 No. Items And Description Qty. Unit Statement Of Compliance (state “comply” Or “not Comply” Unit Price Total Price Procurement Of Room Accommodation With Complete Full Meals (breakfast, Lunch, Dinner, Morning And Afternoon Snacks), Including The Use Of Hotel Facilities And Amenities For The Conduct Of Regional Training-workshop On Establishing Functional Child Protection Committees In Schools- Batch 1 For Guest And Visitors, Sdo Palawan Psds And Select School Heads On December 10-13,2024 78 Pax Procurement Of Complete Meals (breakfast, Lunch, Dinner, Morning And Afternoon Snacks), The Use Of Function Halls And Clean Rest Rooms For The Conduct Of Regional Training-workshop On Establishing Functional Child Protection Committees In Schools-batch 1 For Participants And Pmt From Sdo Palawan And Puerto Princesa City (puerto Princesa City Residents) (no Accommodation) 30 Pax Description Of Services: 1. Rooms 1.1 Rooms Good For 78 Participants 1.2 Can Cater To A Maximum Of 3 Persons (triple Sharing Rooms) 2. Meals And Snacks 2.1 Daily Serving Of Assisted Buffet Meals- Breakfast (6:00 Am-8:30am), Lunch (12:00nn-1:00pm) And Dinner (5:30-7:00pm) (meal-soup, Rice, Two (2) Main With Side Dish, Dessert And Beverage. Two (2) Snacks (am & Pm) @ 9:00am-9:30am And 3:00pm-3:30pm). 2.2 First Meal To Be Served On December 10, Day 0 Will Be Pm Snacks And The Last Meal To Be Served Will Be Lunch On December 13, Day 3 For 78 Participants 2.3 First Meal To Be Served On December 10, Day 0 Will Be Pm Snacks And The Last Meal To Be Served Will Be Dinner On December 13, Day 3 For 30 Participants. 3. Hall 3.1. One (1) Well-lighted And Ventilated Function/conference With Equipment Good For 111 Participants And Pmt. It Must Be Prepared And Ready Ahead Of The Opening Program On Day 0.” 3.2. Have A Designated Area With Tables And Chairs For The Organizing Team/ Secretariat That Can Accommodate The Following: 3.2.1. Space For Registration Are 3.2.2. Space For Medical Team 3.2.3. Space For The Printer And Printing Activities With Access To Electrical Outlet 3.2.4. Space For Supplies And Materials 3.2.5 Space For Documentor/s And Organizing Team With Extension Cords 3.3. Strong Internet Connection In The Area 4. Audio Visual Facilities 4.1 Philippine National Flag 4.2 Two (2) Lcd Projector For Training Proper 4.3 Sound System With Standby Operator 4.4 Functional Microphones With Stand And Sound System For Function Hall 5. Other Inclusions 5.1 Free Flowing Coffee, Tea With Sugar And Creamer Or Milo In Sachet And/or Other Healthy Drinks 5.2 Standby Enough Number Of Food Attendants To Facilitate The Efficient Serving Of Meals And Snacks 5.3 Standby Hotel Representative (contact Person) 5.5. Easy Access To Clean Restrooms For Male And Female 5.6 Visibility Of Emergency Exit Plans 5.7 Three (3) Staff (pmt And Proponent) Free Of Charge For Accommodation, Full Board Meals And Snacks Per Day. 5.8 Free Tarpaulin With Size Of “4x8” Feet For Backdrop And Activity Signage 5.9 Standby Generator In Case Of Power Interruption 5.10 Venue Must Be Within Puerto Princesa City 5.11 Activity Signage At The Lobby Approved Budget For The Contract (abc) Php 576,000.00 Delivery Period: Three (3) Days Total This Is To Submit Our Price Quotations As Included Above, Subject To The Terms And Conditions Of The Rfq. Supplier’s Company Name: Tin: Address: Telephone: Cp No.: E-mail: Supplier’s Authorized Representative Signature Over Printed Name: Date: Ii. Terms And Conditions A. Submission Of Requirements 1. Sealed Quotations And Other Requirements Below Shall Be Submitted To The Bids And Awards Committee (bac) Secretariat At 3rd Floor, Deped Building, Schools Division Office Of Palawan, Gov. Salvador P. Socrates Gov’t Center, Bancao-bancao, Puerto Princesa City. 2. Interested Supplier Shall Submit The Following Requirements: A. Letter Of Intent To Participate In The Said Procurement. B. Duly Signed Request For Quotation. Prices Shall Be Quoted In Philippine Pesos. Statement Of Compliance Must Be Accomplished By The Supplier. C. Documentary Requirements Of The Following: 1. Dti Certificate Of Registration 2. Valid Mayor’s Permit 3. Tax Clearance 4. Bir Certification 5. Philgeps Registration 6. Notarized Omnibus Sworn Statement Bidder’s Failure To Submit Such Documents Upon Opening Shall Be Ground For Disqualification. B. Award The Supplier Who Submitted The Lowest Calculated And Responsive Quotation Shall Be Awarded The Purchase Order/contract After Evaluation By The Bac. C. Delivery Of Services 1. Delivery Of Services Shall Be Made On The Schedule Date Upon Receipt Of Purchase Order/contract. 2. Upon Delivery Of The Services, The Supplier Shall Notify The Purchaser And Present The Following Document/s To The Purchaser: A. Original And Copy Of The Supplier’s Statement Of Account. D. Evaluation Of Quotations Quotations Shall Be Compared And Evaluated Based On The Following Criteria: 1. Completeness Of Submission. 2. Compliance With Technical Specifications; And 3. Price E. Instructions 1. The Supplier Shall Be Responsible For All The Services To Be Rendered And Should Be In Accordance With The Schedule And Specifications Stipulated In The Contract/purchase Order. Failure Of The Supplier To Comply With This Provision Shall Be Grounds For Cancellation Of The Contract/purchase Order Issued To The Supplier. 2. Supplier Shall Pick Up The Purchase Order/contract Issued In Its Favor Within Three (3) Calendar Days From Receipt Of Notice To The Effect. A Telephone Call Or Fax Transmission Shall Constitute An Official Notice To The Supplier. Thereafter, If The Purchases Order Remains Unclaimed, The Purchase Order Shall Be Canceled. To Avoid Delay In The Delivery Of The Requesting Agency’s Requirements, All Defaulting Supplier Shall Be Precluded From Proposing Or Submitting Substitute Quotation (s) Or Item (s). 3. A Supplier Who Accepted A Purchase Order/contract But Failed To Deliver The Required Goods/services Within The Time Called For In The Purchase Order/contract Shall Be Disqualified From Participating In Deped Or Any Of Deped Unit’s Future Procurement Activities. This Is Without Prejudice To The Imposition Of Other Sanctions Prescribed Under R.a 9184 And Its Irr-a Against The Supplier. 4. The Supplier Shall Pay All Duties, Excise, And Other Taxes And Revenue Charges. 5. All Transactions Are Subject To Withholding Of Credible Value-added Tax And/or Expanded Value – Added Tax Per Revenue Regulation(s) Of The Bureau Of Internal Revenue. F. Payment One Hundred Percent (100%) Of The Contract Price Less Government Tax Shall Be Paid To The Supplier After Completion/compliance Of The Services Delivered. Payment Shall Be In The Form Of A Check And Addressed To The Supplier’s Name Firm. After Carefully Reading Your Request For Quotation And Its Terms And Conditions, I/we Quote You On The Item/s At The Price Noted In The Rfq. The Quotation Shall Be Binding Upon Us For Thirty (30) Calendar Days Reckoned From The Last Day Of Submission Indicated In The Submission Requirements. We Shall Accept The Corresponding Award On Purchase Order At Any Time Before The Expiration Of This Period

Details: Description Invitation To Bid Project No.: (24-10-023) Procurement Of Ict Equipment For Inclusive Learning Resource Center 1. The Department Of Education (deped) Division Of Sultan Kudarat, Through The Cy 2024 Government Appropriations Act (gaa), Intends To Apply The Sum Of One Million Six Hundred Eighty-eight Thousand Nine Hundred Seventy-eight Pesos And Forty-six Centavos (p1,688,978.46), Being The Approved Budget For The Contract (abc), To Eligible Payments Under The Contract For Procurement Of Ict Equipment For Inclusive Learning Resource Center Under Republic Act 11975 –fy 2024 Gaa. Bids Received That Exceed The Abc Shall Be Rejected At Bid Opening. Unit Item Description Quantity Unit Cost Total Cost Additional Specification Procurement Of Ict Equipment For Inclusive Learning Resource Center Licenses Braille Translator Software 1 39,688.25 39,688.25 Can Convert Word Document To Braille Document Can Translate Filipino Braille (grade 1 And Grade 2 Braille), Unified English Braille (grade 1 And Grade 2 Braille) Can Be Used In Print-to-braille Transcription Licenses Screen Reading Software Jaws 1 115,315.20 115,315.20 Compatible With Refreshable Braille Display Running In Windows Platform Pcs Handheld Video Magnifier With Clear, Vivid Image And No Distortion 1 30,270.24 30,270.24 Can Enlarge / Magnify Everything On Screen Up To 80x Compatible With Screen Reading Software Pcs Document Scanner, 2nd Gen Auto-flatten, Deskew Tech, 18mp Sony Camera, Capture A3, 186 Languages Ocr, Convertable To Pdf/searchable Pdf/word/tiff/excel, Run On Windows&mac O 1 43,644.00 43,644.00 Pcs Electronic Handheld Video Magnifier 2 20,500.00 41,000.00 With 4.3-inch Screen 2 To 14 Times Magnification With Built-in Led Lighting Pcs Screen Magnifying Software 1 78,798.72 78,798.72 Can Enlarge / Magnify Everything On Screen Up To 60x Compatible With Screen Reading Software Unit Portable Teleprompter 16-inche Universal Prompter With Cold Shoe Mount 1/4in & 3/8in Threaded Hole Compatible With Smartphone/ Tablet 1 11,096.00 11,096.00 Adjustable Stronger Stand, Max Height: 2m, Self-reversing Hd Monitor Support Usb, Vga, Hdmi, Av Video Direct Input The Monitor And Software Can Support Ppt, Word, Pdf, Jpg, Rtf, Txt And Other Computer-supported Formats As Prompt Content Super Thin 2mm 60/40 Or 70/30 Rate Beam Splitter Adjust Angle Structure Between The Stand And Beamslitter, Make Sure Each Speaker Have The Perfect Reading Effect The Control Mode Supports Wireless Remote Controller And Wireless Mouse And Keyboard Or Foot Pad Professional Telprompter English Software And Dongle Driver, The Driver Software Support All Kinds Of Languages Unit Px240 Audio Voice Recorder 2 2,941.00 5,882.00 Pc Communication Device With Installed Application/programs Such As Numbers/letters/ Animals Etc 1 15,000.00 15,000.00 Pc 9.7mm Noise Cancellation, 3.5mm Jack (analog), Frequency Response 20hz-20khz, Mic Sensitivity 1khz -50db±3%, Gaming Headphones - Black | Cg-hs-hx330-blk 6 1,200.00 7,200.00 License Microsoft Windows 10 Or Latest Version 1 10,300.00 10,300.00 License Microsoft Office Tools 2019 Or Latest Version 3 8,999.67 26,999.00 License Adobe Dreamweaver Latest Version 1 1,000.00 1,000.00 License Adobe Photoshop 2024/ Latest 2 5,000.00 10,000.00 Piece Computer Table 1 6,999.00 6,999.00 Piece Computer Chair 1 4,699.00 4,699.00 Piece Photo Printer 1 6,246.90 6,246.90 Wireless Photo All-in-one With Auto Duplex Printing Print, Scan, Copy Auto Duplex Printing Wireless, Wireless Pictbridge, Mopria, Airprint, Direct Wireless Recommended Monthly Print Volume: 30 - 100 Pages Operating System: Win 8 / Win 7 / Vista / Xp, Mac Os X 10.7.5 And Later Borderless Printing: A4 / Letter / 4 X 6" / 5 X 7" / 8 X 10") Standard Paper Input (front Tray): 100 Sheets (a4/ Ltr) / 20 Sheets ( 4 X 6 “ ) Paper Weight: 64 To 105 G/m2 Up To 300 G/m2 Dimension (w X D X H): 449 X 304 X 152 Mm Weight: 5.4 Kg Interface / Connectivity: Usb 2.0 Hi-speed / Wireless Lan /wireless Pictbridge, Direct Wireless Scanner Type: Flatbed Piece Dslr Camera (body) 1 61,157.80 61,157.80 32.5mp Aps-c Cmos Sensor + Digic 8 Dual Pixel Cmos Af 30fps Raw Burst Mode (one=shot & Servo Af) 5,481 Selectable Focus Positions Eye Detection Af (one-shot &servo Af) 4k Video (uncropped/cropped) Pieces Camera Flash 1 8,797.80 8,797.80 Flash Coverage Angle: 14mm* To 200mm (* With Wide Panel),bounce Angle: 120 Degree Upward, 7 Degree Down & 180 Degree Horizontally (left And Right), Wireless Flash Function: Optical Transmission And Radio Transmission, Maximum Flash Count: Approx. 335-2345 With A Fully Charged Battery Pack Lp-el, Power Source: Lp-el Lithium Ion Battery Pack Pieces Camera Lens 1 36,847.80 36,847.80 Construction (group Elements) 12-16, Closest Focusing Dsitance (m.ft) 0.39/1.3, Diameter X Length (mm) (approx.) 77.4 X 96, Drive System Direct Drive Provided By Nano-usm, Filter Size (mm) 67, Max. Magnification (x) 0.28, Min. Aperture 22-36,no. Of Diaphragm Blades 7, Weight (g) Approx.) 501, Accessories (lens Cap) E-67 Ii, Accessories (lens Hood) Ew-73d,accessories (lens Bag) Lp1116 Pieces Camera Tripod 2 3,800.00 7,600.00 Maximum Versatility And Light Weight 2. 3-way Head Platform 3. Easy And Portable For Carrying And Usage 4. Good Accessory As Photo Equipment 5. Built In Level 6. 4-section Aluminum Legs 7. Entry Level Product Spesifications: Maximum Height: 1020mm Minimum Height: 350mm Folded Length: 345mm Max. Tube Diameter: 16.8mm Maximum Tripod Load : 2.5kg Head Type: 360 Swivel Fluid Head Material: 1/4 Aluminum Package Weight: 420g Screw Size: 1/4" Pieces Studio Lights 2 4,000.00 8,000.00 Model:de300, Output Range:300w, Guide No.:58m, Color Temperature:5600k, Variation:stepless Light Regulation, Flash Duration:1/2000-1/800s, Recycling Time:0.3-1.5s, Modeling Lamp:150w, Power Supply:220-240v Pieces Multipurpose Printer Big For A3 Print Outs 1 28,000.00 28,000.00 Multipurpose Printer Big For A3 Print Outs Colored Set Ink /complete Colors For A3 Printer 6 4,000.00 24,000.00 Pieces 20 Mts Hdmi Cord 3 300.00 900.00 Piece Internet Router 1 3,000.00 3,000.00 Piece Presentation Clicker 5 155.00 775.00 Piece Headset 3 199.00 597.00 Piece External Drive 1 Terabyte 1 4,000.00 4,000.00 Piece 3 In 1 Ink Tank Printer With Print, Scan, Copy, Fax With Adf 9 8,222.2 74,000.00 Can Accommodate Up To A3 Paper With Document Feeder Scanner And Flatbed Scanner With Photocopy Feature Can Print Grayscale And Colored Set Computer Desktop Core I5 Set With Mouse/mouse Pad/speakers And Table/ Headphones 9 33,659 302,928.00 With Windows Os 16 Gb Ram I5 Or Higher Processor With 1 Gb Hdd With 240gb Ssd With 22 Inch Monitor With Keyboard And Mouse With Stereospeakers Piece Desktop Computer I9 Desktop 1 107,000 107,000.00 Phanteks Xt View Atx Case – Black. Intel Core I9-14900kf 3.2/6.0ghz 24 Core, 32 Thread Cpu. Gigabyte Z790 S Ddr4 Motherboard. Nvidia Geforce Rtx 4070 Super 12gb Gddr6x Gpu. 32gb Corsair Vengeance Lpx 3200mhz (2x16gb) 1tb Nvme M.2 Ssd (3500mb/r, 2100mb/w) Contour 750w High Efficiency Atx Psu. Set Computer Desktop Core I3 Set With Mouse/mouse Pad/speakers And Table/ Headphones 12 25,000.00 300,000.00 Cpu Specifications Total Cores 4. # Of Performance-cores 4. # Of Efficient-cores 0. Total Threads 8. Max Turbo Frequency 4.30 Ghz. Performance-core Max Turbo Frequency 4.30 Ghz. Performance-core Base Frequency 3.30 Ghz. Cache 12 Mb Intel® Smart Cache. Set Desktop Computer With High Specs I7 Server 1 65,000.00 65,000.00 Nzxt H6 Flow Rgb Black Case Intel Core I7-13700kf 3.4/5.4ghz 16 Core, 24 Thread Cpu Gigabyte Z790 S Ddr4 Motherboard Nvidia Geforce Rtx 4060 8gb Gpu 16gb Ddr4 3200mhz Memory (2x8gb) 1tb Nvme M.2 Ssd (3500mb/r, 2100mb/w) Cooler Master Masterliquid 240l Core Argb 240mm Black Liquid Cooler Contour 650w High Efficiency Atx Psu 2400mbps 802.11ax Ax200 Dual Band Pcie Wi-fi 6 / Bluetooth 5.2 Adapter Built In 5.1 Sound Card Microsoft Windows® 11 Home Piece Diy Usb Wireless Mouse 12 541.67 6,500.00 Piece Usb 32g 7 550.00 3,850.00 Unit Bluetooth Speaker With Microphones 4 9,507.44 38,029.75 Set Sound System With Amplifier , Microphones And Speakers 2 29,444.00 58,888.00 Piece Outdoor Hd Smart Board/ Projector Screen/ Lcd Screen 3 26,718.33 80,155.00 Pieces Heavy Duty Extension Wire 10 Mtrs 15 421.33 6,320.00 Set Portable Multimedia Speaker For Pc, Laptop, Tablet, 4 1248.5 4,994.00 Unit Router Ac2100 Gigabite 2.4g 5.0ghz Strengthen Dual-band 2033mbps Wireless Wifi Repeater 6 High Gain Antennas Wider Gubeng 1 3,500.00 3,500.00 Total: 1,688,978.46 2. Deped-division Of Sultan Kudarat, Through Its Bids And Awards Committee (bac), Now Invites Bids For The Above-mentioned Procurement Project. Prospective Bidders Must Have An Experience Of Having Completed At Least One (1) Contract That Is Similar To The Contract To Be Bid. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii, Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non- Discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. 4. Bidding Is Restricted To Filipino Citizens/sole Proprietorships/partnerships, Or Organizations With At Least Seventy Five Percent (75%) Interests Or Outstanding Capital Stocks Belonging To Citizens Of The Philippines. 5. A Complete Set Of Bidding Documents May Be Acquired Or Purchased At Deped-division Of Sultan Kudarat Bac Secretariat, Located At National Hi-way Brgy, Kenram, Isulan, Sultan Kudarat Upon Accomplishing A Bidder’s Information Sheet And Payment In Cash Of A Non-refundable Fee By Interested Bidders In The Amount Of Five Thousand Pesos (php5,000.00) Per Lot To The Division Cashier. Only Bidders Who Purchased The Bidding Documents Will Be Allowed To Submit Bids (itb 6.8). It May Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), Www.philgeps.net, Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Deped- Division Of Sultan Kudarat Will Be Having The Following Procurement-related Activities. Activity Date & Time Venue Issuance Of Bidding Documents November 13–december 03, 2024 Division Office, National High-way,brgy Kenram, Isulan, Sul. Kudarat Pre-bid Conference November 21, 2024 (10:00 Am) Division Kalimudan Hall, Brgy. Kenram, Isulan Sultan Kudarat Submission And Opening Of Bids December 03, 2024 (10:00 Am) Division Kalimudan Hall, Brgy. Kenram, Isulan Sultan Kudarat 7. Prospective Bidders Are Strongly Encouraged To Order Or Download The Electronic Copy Of The Bidding Documents From The Philgeps Website: Www.philgeps.net, For Them To Be Included In The Document Request List Of The Project. 8. Bids Must Be Delivered To The Address And On The Date And Time Stated Herein. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. A Valid Bid Securing Declaration Must Accompany The Bid(s) In Lieu Of The Bid Security. 9. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Opening Of Bids At The Address Stated Herein. Late Bids Shall Not Be Accepted. 10. Deped Division Of Sultan Kudarat Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Not Award The Contract(s), Or Annul The Bidding Process Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Melvin P. Fortuna Chairperson, Bac Secretariat Department Of Education Region Xii Division Of Sultan Kudarat Kenram,isulan, Sultan Kudarat Tel/fax # 064-471-1007 Meilrose B. Peralta, Edd Assistant Schools Division Superintendent Bac Chairperson

Details: Description Republic Of The Philippines Province Of Leyte Municipality Of Jaro Invitation To Bid For The Invitation To Bid For The Procurement Of Office Supplies And Equipment For Use By The Different Offices Of The Municipality Of Jaro, Leyte Pb -41-24 1. The Municipality Of Jaro, Through The Local Fund Approved By The Sangguniang Bayan Intends To Apply The Sum Of Six Hundred Forty-four Thousand Four Hundred Pesos (p644,400.00) Being The Abc To Payments Under The Contract For The Procurement Of Office Supplies And Equipment For Use By The Different Offices Of The Municipality Of Jaro, Leyte. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipality Of Jaro Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Twenty (20) Calendar Days Bidders Should Have Completed, Within Ten (10) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Description Of Goods Item No. Item & Description Unit Qty. Procurement Of Office Supplies And Equipment For Use By The Different Offices Of The Municipality Of Jaro, Leyte 1 A3 Paper Reams 10 2 Acetate (extra Thick, Clear) Meters 5 3 Albatross (large) Pcs. 39 4 Antivirus (internet Security) Pcs 2 5 Avr 200v With Surge Protection Pcs 1 6 Ballpen Black Boxes 57 7 Ballpen Blue Boxes 12 8 Ballpen Red Boxes 2 9 Battery Aaa 2pcs/packet (heavy Duty) Pcs 4 10 Binder Clip 15mm Boxes 4 11 Binder Clip 19mm Boxes 10 12 Binder Clip 41mm Boxes 11 13 Binder Clip 51mm / 2" Boxes 69 14 Binder Clip 25mm / 1" Boxes 30 15 Binder Clip 32mm /1 ¼" Bxs. 2 16 Bondpaper Short Reams 91 17 Box Filer Pcs 58 18 Broom Soft Tamboo Pcs 16 19 Broom Stick Pcs 24 20 Brush Long Handle Pcs 12 21 Calculator 14 Digits (battery Operated) Pcs 13 22 Carbon Paper Long (black) Boxes 7 23 Cartolina Green Pcs 7 24 Cartolina White Pcs 7 25 Cartolina Yellow Pcs 6 26 Cert. Holder (a4) Pcs 24 27 Chlorine (granules) Kilo 1 28 Clip Board Folder (long) Pcs 3 29 Computer Keyboard Unit 2 30 Cord (white Rope)" Hughog" Roll 1 31 Continous Paper 2 Ply 11x14 7x8 Boxes 1 32 Correction Fluid Pcs 6 33 Correction Tape 8meters Pcs 295 34 Cork Pin Box 1 35 Detergent Powder 1kg/pack Packs 18 36 Digital Voice Recorder Pcs 1 37 Dishwashing Liquid (500ml) Bottles 28 38 Dishwashing Paste 200g Pcs 10 39 Documentary Tray (3-layers) Pcs 25 40 Double Adhesive Tape 2" Rolls 3 41 (dtr) Daily Time Record Pads 93 42 Duct Tape 2" Rolls 7 43 Dust Pan Pcs 6 44 Envelope Brown Long Pcs 96 45 Envelope Brown Short Pcs 80 46 Envelope Expanded Plastic Long Pcs 5 47 Eraser (big) Pcs 2 48 Expanded Envelope Long (brown) Pcs 284 49 Expanded Folder Long (assorted) Pcs 165 50 Extension Wire (10m) Pc 1 51 Extension Wire (3 Outlet, 5meters) Pcs 1 52 External Drive (1tb) Pc 2 53 External Hard Drive 4tb Hdd Usb 3.0 Pcs 1 54 Faber Castel 0.5 Black (50's) Bx 1 55 Fabric Conditioner Gallon 2 56 Feather Duster Pcs 6 57 Floor Mop W/ Handle Pcs 7 58 Floor Mat Pcs 2 59 Folder Brown Long (100pcs/pack) Packs 3 60 Folder Blue Legal Pack 1 61 Folder White Legal (100pcs/pack) Packs 15 62 Folder White Short Pcs 62 63 Folder W/ Jacket Long Pcs 20 64 Folder W/ Jacket Short Pcs 20 65 Glass Cleaner Spray 350ml Bottles 5 66 Glue Multi-purpose Big 130g Jars 33 67 Highlighter (assorted) Pcs 16 68 Hp Toner 78a Pc 2 69 Index Tab Yellow Bx 35 70 Ink For Refill Canon 63010 Bxs 2 71 Long Nose Pliers (small) Pc 2 72 Long Plastic Envelope (clear) Pcs 12 73 Maintenance Box (epson L6190) Pcs 2 74 Marking Pen Black Pcs 40 75 Masking Tape 2 Inches Rolls 3 76 Masking Tape 3 Inches Rolls 2 77 Masking Tape 4 Inches Rolls 1 78 Mop Handle Pcs 12 79 Mouse (wireless) Pcs 4 80 Mouse Pad Pcs 4 81 Mouse (wired) Pcs 3 82 Multifunctional Metal Pen Holder Pcs 1 83 Multi-purpose Bleach (1 Liter) Bottle 2 84 Muriatic Acid Gallon 2 85 Notebook 70 Leaves Pcs 2 86 Office Chair (executive) Ergonomic Pcs 5 87 Office Curtain Pcs 8 88 Ordinary Mailing Envelope White Pcs 100 89 Ordinary Mailing Envelope White Box 13 90 Packing Tape 2 Inches (50meters) Rolls 5 91 Packing Tape 3 Inches Rolls 2 92 Pail Medium Pcs 1 93 Paper Clip Jumbo Boxes 38 94 Paper Clip Small Boxes 22 95 Paper Fastener Boxes 49 96 Paper Ruled Pad/yellow Pad Pads 12 97 Paper Tape 1" Pcs 10 98 Photopaper A4 Glossy Paper Packs 9 99 Photopaper Long Packs 3 100 Planner 2025 Pcs 2 101 Printer Ink (brother Dcp-t710w) Y Bottles 3 102 Printer Ink (brother Dcp-t710w) B Bottle 7 103 Printer Ink (brother Dcp-t710w) C Bottle 3 104 Printer Ink (brother Dcp-t710w) M Bottle 3 105 Printer Ink (brother Dcp-t710w) Set 1 106 Printer Ink (brother Lc539xl) Black Bottles 15 107 Printer Ink (brother Lc539xl) Cyan Bottles 15 108 Printer Ink (brother Lc539xl) Magenta Bottles 15 109 Printer Ink (brother Lc539xl) Yellow Bottles 15 110 Printer Ink (brother L2740dw Ink Cartridge) Pc 1 111 Printer Ink (brother Colored M,c,y Bt 5000) Pc 1 112 Printer Ink (cannon G4010) M Bottles 2 113 Printer Ink (cannon G4010) Y Bottles 2 114 Printer Ink (cannon G4010) C Bottles 2 115 Printer Ink (cannon #790) Set 1 116 Printer Ink (epson) 003 Black Bottles 18 117 Printer Ink (epson) 003 Cyan Bottles 8 118 Printer Ink (epson ) 003 Magenta Bottles 8 119 Printer Ink (epson ) 003 Yellow Bottles 8 120 Printer Epson 003 (l5290) Set 3 121 Printer Ink (epson 001) Black Bottles 6 122 Printer Ink (epson 001) Yellow Bottles 3 123 Printer Ink (epson 001) Cyan Bottles 3 124 Printer Ink (epson 001) Magenta Bottles 3 125 Printer Ink Epson L3210 Black Bottles 1 126 Printer Ink Epson L3210 Yellow Bottles 1 127 Printer Ink Epson L3210 Cyan Bottles 1 128 Printer Ink Epson L3210 Magenta Bottles 1 129 Printer Ink (epson L3110) Black Bottles 3 130 Printer Ink (epson L3110) Yellow Bottles 2 131 Printer Ink (epson L3110) Cyan Bottles 2 132 Printer Ink (epson L3110) Magenta Bottles 2 133 Printer Ink (epson L360) 664 Black Bottles 4 134 Printer Ink (epson L360) 664 Cyan Bottles 4 135 Printer Ink (epson L360) 664 Magenta Bottles 4 136 Printer Ink (epson L360) 664 Yellow Bottles 4 137 Printer Ink (epson L6190) Magenta Bottles 4 138 Printer Ink (epson L6190) Black Bottles 4 139 Printer Ink (epson L6190) Cyan Bottles 4 140 Printer Ink (epson L6190) Yellow Bottles 4 141 Printer Ink Epson L15150 Black Bottles 3 142 Printer Ink Epson L15150 Yellow Bottles 1 143 Printer Ink Epson L15150 Magenta Bottles 1 144 Printer Ink Epson L15150 Cyan Bottles 1 145 Printer Ink Epson T6641 Black Bottles 3 146 Printer Ink Epson T6641 Cyan Bottles 1 147 Printer Ink Epson T6641 Yellow Bottles 1 148 Printer Ink Epson T6641 Magenta Bottles 1 149 Printer Ink(brother Btd60-bk) Black Bottles 8 150 Printer Ink (brother Btd60-bk) Colored Bottles 3 151 Printer Ink (universal) Black Liters 1 152 Push Pin Box 5 153 Record Book (200 Pages) Pcs 3 154 Ringbook Filer (smart) Pcs 6 155 Rubber Band (big) Boxes 5 156 Rubber Stamp (received) Pcs 1 157 Rubber Stamp (self-ink) Pcs 4 158 Rubberized Doormat (medium) Pcs 10 159 Ruler 12" Pcs 11 160 Scotch Tape 1 Inch Rolls 23 161 Scouring Pad (scotch Brite) Pcs 12 162 Self Ink Stamp (certified Correct) Pc 1 163 Sign Pen 0.5 Black Boxes 20 164 Sign Pen 0.5 Blue Boxes 4 165 Sign Pen 0.5 Green Boxes 2 166 Sign Pen 0.7 Black Boxes 21 167 Sign Pen 0.7 Blue Boxes 3 168 Sign Pen 0.7 Green Boxes 3 169 Sliding Folder (long) Pcs 5 170 Specialty Paper-powderblue (long) Packs 15 171 Specialty Paper Skyblue Packs 2 172 Specialty Paper White (a4) Packs 1 173 Specialty Paper Yellow (long) Packs 5 174 Spin Mop W/ Spinner Set 2 175 Sponge Pcs 3 176 Stamp Pad Ink Blue Bottles 6 177 Stamp Pad Blue Pcs 8 178 Staple Wire #10 Boxes 12 179 Staple Wire #35 Boxes 58 180 Stapler Big W/ Remover Pcs 25 181 Stapler 23/13 Heavy Duty Pc 1 182 Staple Wire 23/13 Boxes 5 183 Staple Wire Remover Pcs 4 184 Steel Cabinet (4-layers) Pc 1 185 Sticky Note 3x2" Pad 2 186 Sticky Note 3x3" Pad 12 187 Sticky Note 3x4" Pad 5 188 Sticky Note 1/2" Pad 12 189 Sticky Note 1/4" Pad 23 190 Sticky Note Pad 1" Pack 1 191 Stick-on, Colored Notepad Pads 9 192 Sticky Note Assorted Pack 2 193 Sticky Note For Tabbing Pads 19 194 Sticker Paper A4 (white 50 Sheets/pack) Pack 3 195 Sticky Paper A4 (20 Sheets/pack) Packs 3 196 Storage Box 155l (heavy Duty) Pc 4 197 Tape Dispenser Pcs 5 198 Technical Pencil, 0.5 Pc 1 199 Toilet Bowl Cleaner Bottles 10 200 Toilet Brush Pcs 3 201 Toilet Cleaner Bottle 9 202 Transparent Tape 1" (50m) Pcs 4 203 Trash Bag Small Packs 5 204 Trash Bin Big Pcs 4 205 Trash Bin With Swing Cover Pcs 1 206 Typewritter Ribbon (black Long) Dozen 2 207 Usb 8 Gb Pcs 1 208 Usb 16 Gb Pcs 3 209 Usb 32 Gb Pcs 1 210 Usb 64 Gb Otg, Type C Pcs 6 211 Usb 128 Gb Pcs 2 212 Water Well Paste Jar 1 213 White Board Marker Pcs 5 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Municipality Of Jaro And Inspect The Bidding Documents At The Address Given Below During 8:00 Am To 5:00 Pm On Official Working Days. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On Thursday, November 21, 2024 From The Given Address And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (php1,000.00) Only. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Municipality Of Jaro Will Hold A Pre-bid Conference On Friday, November 29, 2024 At 02:00 Pm At Bac Office Municipal Building, Cor. Real And Del Carmen Sts., Jaro, Leyte Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below, On Or Before Wednesday, December 11, 2024 At 02:00 Pm Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On Wednesday, December 11, 2024 At 02:00 O’clock In The Afternoon At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Municipality Of Jaro Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Luz D. Raganit Bac Office Municipal Building Cor. Real And Del Carmen Sts. Brgy. I Pob., Jaro, Leyte Email Address: Raganitluz@gmail.com Cp No. 099-9980-8786 November 21, 2024 (sgd) Engr. Pempe C. Quiňones Bac Chairman

Details: Description Item No. Item Description Qty Unit Approved Budget For Contract 1 Adapter Plug 3 Piece 320.10 2 Adding Machine Tape, 2" 20 Roll 810.00 3 Air Freshener Refill, For Auto Spray, 269ml 1 Piece 371.60 4 Air Freshener, 320ml/can 19 Can 5,352.30 5 Air Freshener, Auto Spray, 269ml 1 Piece 640.60 6 Alcohol, Ethyl, 70% Solution, 1gallon/bottle 1 Bottle 729.00 7 Alcohol, Ethyl, 70% Solution, 1liter/bottle Pump 2 Bottle 505.60 8 Alcohol, Ethyl, 70% Solution, 500ml/bottle 15 Bottle 1,678.50 9 Alcohol, Isopropyl, 70% Solution, 1gallon/bottle 21 Bottle 16,008.30 10 Alcohol, Isopropyl, 70% Solution, 500ml/bottle 95 Bottle 10,906.00 11 Alcohol, Isopropyl, 70% Solution, 500ml/bottle Pump 5 Bottle 739.50 12 Ballpen, Crystal Tech, 0.5, 50s/box, Black 17 Box 6,885.00 13 Ballpen, Crystal Tech, 0.5, 50s/box, Blue 1 Box 405.00 14 Ballpen, Crystal Tech, 0.5, Blue 51 Piece 413.10 15 Ballpen, Crystal Tech, 0.5, Red 50 Piece 405.00 16 Ballpen, Fine Tip, 0.5, Black 101 Piece 3,413.80 17 Ballpen, Fine Tip, 0.5, Blue 6 Piece 202.80 18 Ballpen, Fine Tip, 0.5, Red 5 Piece 169.00 19 Ballpen, Gel Pen, 0.5, Black 25 Piece 270.00 20 Ballpen, Gel Pen, 0.5, Blue 25 Piece 270.00 21 Ballpen, Gel Pen, 0.5, Red 5 Piece 54.00 22 Ballpen, Retractable, 0.5, Black 81 Piece 769.50 23 Ballpen, Retractable, 0.5, Blue 20 Piece 190.00 24 Ballpen, Retractable, 0.5, Red 10 Piece 95.00 25 Ballpen, Tech Point, 0.3mm, Black 5 Piece 472.50 26 Basin, Aluminum, Big 1 Piece 553.50 27 Basin, Aluminum, Small 2 Piece 379.40 28 Bathroom Mirror 3 Piece 4,920.90 29 Bathroom Soap, 125g/box 6 Box 348.00 30 Bathroom Soap, 175g/box 29 Box 2,346.10 31 Bathroom Soap, 55g/pack 3 Pack 72.00 32 Bathroom Soap, 85g/box 10 Box 474.00 33 Battery +c, 2pcs/pack 6 Pack 672.60 34 Battery, Dry Cell, Size Aa, 4pcs/pack 25 Pack 2,945.00 35 Battery, Dry Cell, Size Aaa, 4pcs/pack 17 Pack 2,594.20 36 Battery, Dry Cell, Size D, 1.5 Volts, 2pc/pack 2 Pack 191.20 37 Battery, Rechargeable, Size Aa, 2pcs/pack 3 Pack 2,124.30 38 Battery, Rechargeable, Size Aaa, 2pcs/pack 5 Pack 4,283.00 39 Bill/ Fingertip Moistener, 20g/canister 10 Canister 675.00 40 Bleaching Solution, 100ml/bottle 3 Bottle 34.20 41 Bleaching Solution, 1gallon/bottle 8 Bottle 1,382.40 42 Bleaching Solution, 1liter/bottle 30 Bottle 1,554.00 43 Bolo, Big 5 Piece 3,675.50 44 Bolo, Regular Size 5 Piece 3,004.00 45 Bond Paper, A4, Subs. 18, 500sheets/ream 20 Ream 5,394.00 46 Bond Paper, A4, Subs. 20, 500sheets/ream 2 Ream 621.00 47 Bond Paper, Legal, Subs. 18, 500sheets/ream 46 Ream 11,444.80 48 Bond Paper, Legal, Subs. 18, Colored, 500sheets/ream 2 Ream 999.00 49 Bond Paper, Legal, Subs. 20, 500sheets/ream 7 Ream 2,268.00 50 Bond Paper, Legal, Subs. 24, 500sheets/ream 5 Ream 2,194.00 51 Bond Paper, Letter, Subs. 18, 500sheets/ream 10 Ream 2,414.00 52 Bond Paper, Letter, Subs. 18, Colored, 500sheets/ream 7 Ream 3,307.50 53 Bond Paper, Letter, Subs. 20, 500sheets/ream 106 Ream 30,051.00 54 Book Paper, Letter, Subs. 20, 500sheets/ream 20 Ream 5,670.00 55 Bookbind Cover, Long, Clear Plastic, 5s/pack 2 Pack 405.00 56 Broom, Soft (tambo) 22 Piece 4,158.00 57 Broom, Stick (ting-ting) 19 Piece 1,411.70 58 Bulb, 11watts 5 Piece 661.50 59 Bulb, 9 Watts, Led Bulb Daylight 5 Piece 776.50 60 Bulb, Led, 25 Watts 3 Piece 2,106.00 61 Butane Canister Refill 5 Piece 675.00 62 Cable Ties 5inch 100pcs 12 Pack 2,916.00 63 Cable Ties 6inch 100pcs 12 Pack 4,844.40 64 Calculator, Basic Compact, 14 Digits 5 Piece 4,036.50 65 Car Deodorizer 3 Piece 1,012.50 66 Cartolina, Single, Colored 30 Pack 405.00 67 Cartolina, Single, White 11 Pack 148.50 68 Ceiling Cobweb Remover, Long Wooden/ Plastic Handle 2 Piece 837.00 69 Certificate Holder, A4 19 Piece 2,899.40 70 Certificate Holder, Short 6 Piece 939.60 71 Chopping Board, 12*10 Inches 1 Piece 418.50 72 Chopping Knife 6 Piece 1,385.40 73 Cleaner, Toilet Bowl And Urinal, 500ml/bottle 1 Bottle 139.10 74 Cleaner, Toilet Bowl And Urinal, 900ml/bottle 15 Bottle 3,036.00 75 Cleanser, Scouring Powder, 350g/canister 22 Canister 1,040.60 76 Cling Wrap 1 Roll 835.70 77 Clip Backfold, Metal Clamping, 32mm, 12s/box 6 Box 486.00 78 Clip Backfold, Metal Clamping, 41mm, 12s/box 8 Box 777.60 79 Clip Backfold, Metal Clamping, 50mm, 12s/box 2 Box 291.60 80 Clip Bulldog, Big, 12pcs/box 1 Box 178.20 81 Clip Bulldog, Small, 12pcs/box 1 Box 106.00 82 Clipboard, A4 Size, Metal Clamping, Plastic Board 1 Piece 189.00 83 Clipboard, Fc Legal, Metal Clamping, Plastic Board 6 Piece 1,207.20 84 Cloth, Franela 10 Piece 405.00 85 Coffee Maker 700w 1 Unit 2,159.70 86 Common Nail 2" & 3" 5 Kilo 661.50 87 Compact Disc, Rewriteable, With Case 213 Piece 28,755.00 88 Concrete Nails 2" 5 Kilo 540.00 89 Construction Paper, Assorted Colors, 10sheets/pack 5 Pack 169.00 90 Continuous Form, 1 Ply, 280x241mm (11x9 1/2), Subs. 20 6 Box 8,683.20 91 Correction Pen, 12ml/piece 7 Piece 898.10 92 Correction Tape Refill, 6m X 5mm, 2pcs/pack 1 Pack 91.20 93 Correction Tape, 8m X 5mm 99 Piece 6,019.20 94 Correction Tape, Refillable, 6m X 5mm 1 Pack 91.20 95 Cutter Blade, Heavy Duty Refill, 10pcs/tube 2 Tube 212.80 96 Cutter, Heavy Duty 5 Piece 506.50 97 Data File Box, Double 8 Piece 2,397.60 98 Data Folder 3" Ledger 70mm Long Two Tables Green 10 Piece 7,000.00 99 Dater Stamp, 3mm 7 Piece 1,375.50 100 Detergent Bar, 125g/piece 14 Piece 238.00 101 Detergent Bar, 380g/piece 43 Piece 1,887.70 102 Detergent Powder, 1kg/pack 17 Pack 2,599.30 103 Detergent Powder, 50g/pack 223 Pack 2,341.50 104 Digital Thermometer 10 Piece 2,387.00 105 Dipper 8 Piece 302.40 106 Dishwashing Foam, 100x70x40mm 4 Piece 207.20 107 Dishwashing Liquid, 240ml/bottle 44 Bottle 5,720.00 108 Dishwashing Liquid, 780ml/bottle 6 Bottle 1,814.40 109 Dishwashing Liquid, Refill, 550ml/pack 18 Pack 4,037.40 110 Disinfectant Liquid, Multi Surface Cleaner, 900ml/bottle 10 Bottle 2,522.00 111 Disinfectant Solution, Concentrate, 500ml/bottle 9 Bottle 6,293.70 112 Disinfectant Spray, 340g/can 10 Can 5,508.00 113 Disinfectant Spray, 510g/can 6 Can 4,333.80 114 Disposable Bowl, 100s/pack 8 Pack 2,376.00 115 Disposable Cups, 12oz, 25s/pack, Styro 6 Pack 546.00 116 Disposable Cups, 8oz, 25s/pack, Styro 11 Pack 517.00 117 Disposable Cups, 8oz, 50s/pack, Paper 6 Pack 557.40 118 Disposable Cups, Plastic, 25s/pack 8 Oz 56 Pack 1,573.60 119 Disposable Cups, Plastic, 50s/pack 12 Oz 8 Pack 587.20 120 Disposable Fork, 100s/pack 14 Pack 2,268.00 121 Disposable Fork, 25s/pack 2 Pack 78.80 122 Disposable Gloves, 50s/box 1 Pack 511.00 123 Disposable Gloves, 50's/box 40 Box 20,440.00 124 Disposable Paper Plate, 100s/pack 18 Pack 3,207.60 125 Disposable Spoon, 100s/pack 20 Pack 3,240.00 126 Disposable Spoon, 25s/pack 2 Pack 78.80 127 Door Latch Frame Set 1 Pack 2,700.00 128 Door Mat, Cloth 30 Piece 2,025.00 129 Door Mat, Rubber 9 Piece 3,766.50 130 Doorknob 1 Piece 1,098.90 131 Doorknob, Heavy Duty 3 Piece 5,670.00 132 Dustpan, Plastic, Large, With Handle 4 Piece 351.20 133 Ecg Tracing Paper 10 Roll 1,500.00 134 Electric Stove, Double Burner, Heavy Duty 1 Unit 1,618.70 135 Electric Stove, Double Burner, Heavy Duty, 1200watts Per Burner 1 Unit 3,631.50 136 Electrical Tape, Big 2 Piece 167.40 137 Electrical Tape, Small 12 Piece 518.40 138 Emersion Oil, 30ml (microscope) 2 Pieces 6,075.00 139 Envelope, Brown, A4, 500pcs/box 1 Box 2,700.00 140 Envelope, Brown, Legal, 500pcs/box 1 Box 3,375.00 141 Envelope, Brown, Legal, Single 95 Piece 646.00 142 Envelope, Brown, Short, Single 10 Piece 54.00 143 Envelope, Expanding, Kraftboard, Long 80 Piece 1,840.00 144 Envelope, Mailing, White, Long, 500s/box 3 Box 1,247.40 145 Essential Oil (for Air Purifier) 1 Bottle 945.00 146 Extension Cord, 10meters, 4 Port, Universal 2 Piece 2,700.00 147 Extension Cord, 3m, 6gang 7 Piece 4,725.00 148 Extension Cord, 4 Gang, 3-5meters, With Switch, Heavy Duty 3 Piece 3,240.00 149 Fabric Conditioner, 22ml/pack 155 Pack 1,674.00 150 Fabric Conditioner, 900ml/bottle 4 Bottle 758.00 151 Face Mask Disposable, Basic, 50s/pack 44 Pack 3,564.00 152 Face Mask, Kn95 10s/box 5 Box 2,430.00 153 Face Mask, Kn95 10's/box 10 Box 4,860.00 154 Facial Tissue, 100s/pack 10 Pack 1,377.00 155 Fire Extinguisher Refill Per Lbs 100 Pound 8,100.00 156 Flash Drive, 16gb 2 Piece 675.00 157 Flash Drive, 32gb 9 Piece 4,860.00 158 Flashlight, Rechargeable 12 Piece 11,032.80 159 Flat Bed Sheet 2 Box 1,350.00 160 Flat Cord, #18/2, Per Meter 27 Piece 880.20 161 Floor Mat, Linoleum 2 Piece 297.00 162 Flourescent Starter 1 Piece 20.30 163 Flourescent Tube 18 Watts Led 10 Piece 2,903.00 164 Flourescent Tube Led Straight, T8 18 Watts, 180-264 Volts, Daylight 3 Piece 2,025.00 165 Flourescent Tube, 40watts 2 Piece 268.80 166 Fluorescent Tube, Led, T8 14 Piece 4,663.40 167 Fly Paper 140 Piece 6,090.00 168 Folder, Pressboard, Long, 100sheets/box 5 Box 13,500.00 169 Folder, Pressobard, Long, 100sheets/box 2 Box 5,400.00 170 Folder, Tagboard, A4 10 Piece 75.00 171 Folder, Tagboard, Long 11 Piece 89.10 172 Folder, Tagboard, Long, 100pcs/pack 1 Pack 810.00 173 Folder, Tagboard, Short 1 Piece 6.10 174 Furniture Cleaner, With Cleansing Conditioner, 330ml/can 8 Can 3,281.60 175 Gauze/bandage, 4x4, 5's/pack 100 Pack 7,088.00 176 Glass Cleaner, With Sprayer, 350ml/bottle 3 Bottle 511.20 177 Glass Cleaner, With Sprayer, 500ml/bottle 3 Bottle 648.00 178 Glue Stick, 4s/pack 5 Pack 439.00 179 Glue, All Purpose, 130g/jar 17 Jar 1,331.10 180 Glue, All Purpose, 240g/jar 10 Jar 1,688.00 181 Goggles Heavy Duty 3 Piece 3,645.00 182 Gun Tacker Wire, T50, 1250pcs/box 2 Box 432.00 183 Hammer 1 Pair 471.20 184 Hand Gloves, Cloth 6 Pair 307.80 185 Hand Gloves, Leather 4 Pair 737.20 186 Hand Gloves, Rubber 1 Pair 205.90 187 Hand Gloves, Surgical 100s/box 8 Piece 3,456.00 188 Hand Gloves, Surgical 100's/box 20 Box 8,640.00 189 Hand Gloves,orange Rubber Gloves Construction, Heavy Duty Cotton 6 Pair 648.00 190 Hand Sanitizer, 200ml/bottle 5 Bottle 1,282.50 191 Hydrogen Peroxide, 1l 10 Bottle 5,703.00 192 Ice Box Chest 15 Liters 1 Piece 1,863.00 193 Ice Box Chest 30 Liters 2 Piece 5,022.00 194 Insecticide Spray, 500ml/can 21 Can 10,699.50 195 Keyboard Mouse Pack, Wired, Usb Connection 2 Pack 2,362.60 196 Keyboard, With Numpad, Wired, Usb Connection 2 Piece 1,134.00 197 Kitchen Knife 3 Piece 607.50 198 Laminating Film, A4, 222x286mm X 125microns/box 10 Box 7,594.00 199 Led Head Lamp 2 Piece 486.00 200 Liquid Sosa, 500ml/bottle 14 Bottle 2,154.60 201 Long Nose Plier 1 Piece 1,080.00 202 Lpg Refill 9 Piece 10,935.00 203 Manila Paper, 24sheets/roll 5 Roll 877.50 204 Marker Ink Refill, Permanent, 20ml/bottle, Black 10 Bottle 1,080.00 205 Marker, Permanent, Broad Tip, Black 32 Piece 1,600.00 206 Marker, Permanent, Broad Tip, Blue 5 Piece 250.00 207 Marker, Permanent, Broad Tip, Red 5 Piece 250.00 208 Marker, Permanent, Fine Tip, 12pcs/box, Black 10 Box 5,994.00 209 Marker, Permanent, Fine Tip, 12pcs/box, Blue 1 Box 599.40 210 Marker, Permanent, Fine Tip, 12pcs/box, Red 1 Box 599.40 211 Marker, Permanent, Fine Tip, Black 33 Piece 1,650.00 212 Marker, Whiteboard, Broad Tip, Black 6 Piece 486.00 213 Marker, Whiteboard, Fine Tip, Black 5 Piece 405.00 214 Marker, Whiteboard, Fine Tip, Red 2 Piece 162.00 215 Measuring Tape, 30m 1 Unit 741.20 216 Measuring Tape, 5m 1 Piece 309.20 217 Monobloc Chair With Back Rest, Without Arm Rest 10 Piece 5,751.00 218 Monobloc Chair, High Stool, 28" 30 Piece 16,530.00 219 Mop Handle, Plastic Handle, Plastic Frame, Heavy Duty, 5ft 7 Piece 3,283.00 220 Mop Handle, Wooden Handle, Metal Frame, 5ft 5 Piece 1,539.00 221 Mop Refill, Tornado 7 Piece 1,498.00 222 Mop Squeezer, Tornado 1 Set 2,211.30 223 Mophead, Cotton, 500g 19 Piece 2,644.80 224 Mophead, Cotton, 600g 5 Piece 812.50 225 Moth Balls 5 Piece 108.00 226 Mouse Pad, Basic 5 Piece 270.00 227 Mouse, Optical, Wired, Usb Connection 13 Piece 3,949.40 228 Muriatic Acid, 1gallon/bottle 2 Bottle 675.00 229 Muriatic Acid, 1l/bottle 1 Bottle 144.50 230 Muriatic Acid, 500ml/bottle 25 Bottle 1,620.00 231 Note Pad, Stick On, 2" X 3", 100sheets/pad 14 Pad 714.00 232 Note Pad, Stick On, 3" X 3", 100sheets/pad 44 Pad 3,181.20 233 Note Pad, Stick On, 3" X 4", 100sheets/pad 27 Pad 2,662.20 234 Note Pad, Stick On, 3" X 5", 100sheets/pad 9 Pad 1,020.60 235 Notebook, Spiral, 80 Leaves 4 Piece 140.40 236 Office Jacket 11 Piece 16,632.00 237 Official Record Book, 8.5x11, Hard Bound, 300 Pages 10 Piece 2,582.00 238 Official Record Book, 8.5x11, Hard Bound, 500 Pages 10 Piece 2,869.00 239 Oxygen Tank Refill 40 Cylinder 42,120.00 240 Pad Paper, Yellow Pad, 80leaves/pad 5 Pad 405.00 241 Pail, Plastic, 16liters 4 Piece 1,390.80 242 Pail, Plastic, 20liters W/ Cover 4 Piece 3,088.80 243 Paint, 1gallon 1 Piece 1,154.30 244 Paper Clip, Plastic Coated, 33mm, 50g/box 1 Box 20.30 245 Paper Clip, Plastic Coated, 50mm, 50g/box 3 Box 113.40 246 Paper Fastener, Metal, 50s/box 24 Box 2,268.00 247 Paper Fastener, Plastic, 50s/box 25 Box 1,520.00 248 Paper Towel, Jumbo Roll, 2ply 4 Roll 1,042.40 249 Paper/document Tray, 3 Layers, Plastic Base, Metal Rod Frame 4 Piece 4,309.20 250 Pencil Sharpener, Manual, Sigle Cutter Head 2 Piece 931.60 251 Pencil, Lead #1, 12s/box 2 Box 222.20 252 Pencil, Lead #2, 12s/box 19 Box 2,110.90 253 Photo Paper, A4, 230g, Glossy, 20s/pack 6 Pack 810.00 254 Plaque 15 Piece 15,000.00 255 Plastic Bag, Clear, 100s, 8x10 25 Piece 557.50 256 Plastic Bag, Sando, Large 19 Piece 4,425.10 257 Plastic Bag, Sando, Medium 16 Piece 1,804.80 258 Plastic Bag, Sando, Small 6 Piece 376.80 259 Plastic Bag, Sando, Xl 14 Piece 4,158.00 260 Plier Set Tool Kit Heavy Duty (mechanical, Wire And Long Nose) 2 Pack 6,966.00 261 Plier, Long Nose, 8" 2 Piece 638.00 262 Post Screw, 2" 100 Pack 1,350.00 263 Povidone Iodine, 1l 5 Piece 4,644.00 264 Printer Ink Cartridge, Canon 810, Black 4 Piece 5,832.00 265 Printer Ink Cartridge, Canon 811, Tri-color 2 Piece 3,847.60 266 Printer Ink Cartridge, Hp 680, Black 6 Piece 4,357.80 267 Printer Ink Cartridge, Hp 680, Tri-color 4 Piece 2,905.20 268 Printer Ink Refill, Epson 003, 65ml/bottle, Black 87 Bottle 36,705.30 269 Printer Ink Refill, Epson 003, 65ml/bottle, Cyan 14 Bottle 5,906.60 270 Printer Ink Refill, Epson 003, 65ml/bottle, Magenta 14 Bottle 5,906.60 271 Printer Ink Refill, Epson 003, 65ml/bottle, Yellow 14 Bottle 5,906.60 272 Printer Ink Refill, Epson T6641, 70ml/bottle, Black 3 Bottle 1,265.70 273 Printer Ink Refill, Epson T6642, 70ml/bottle, Cyan 2 Bottle 843.80 274 Printer Ink Refill, Epson T6643, 70ml/bottle, Magenta 2 Bottle 843.80 275 Printer Ink Refill, Epson T6644, 70ml/bottle, Yellow 2 Bottle 843.80 276 Printer Ink Refill, Epson T6731, 70ml/bottle, Black 3 Bottle 2,025.00 277 Printer Ink Refill, Epson T6732, 70ml/bottle, Cyan 1 Bottle 675.00 278 Printer Ink Refill, Epson T6733, 70ml/bottle, Magenta 1 Bottle 675.00 279 Printer Ink Refill, Epson T6734, 70ml/bottle, Yellow 1 Bottle 675.00 280 Printer Ink Refill, Epson T6735, 70ml/bottle, Light Cyan 1 Bottle 675.00 281 Printer Ink Refill, Epson T6736, 70ml/bottle, Light Magenta 1 Bottle 675.00 282 Printer Ink Refill, Hp Gt52, 70ml/bottle, Black 1 Bottle 425.30 283 Printer Ink Refill, Universal Pigment, 1l/bottle, Black 3 Bottle 2,016.90 284 Printer Ink Refill, Universal Pigment, 1l/bottle, Cyan 1 Bottle 672.30 285 Printer Ink Refill, Universal Pigment, 1l/bottle, Magenta 1 Bottle 672.30 286 Printer Ink Refill, Universal Pigment, 1l/bottle, Yellow 1 Bottle 672.30 287 Puncher, Paper, Heavy Duty, Two Hole Guide 11 Piece 2,896.30 288 Push Brush, Wooden Handle 2 Piece 385.00 289 Push Pin, 100pcs/box 2 Box 86.40 290 Rag, Cotton, 8" 80 Piece 760.00 291 Rag, Cotton, 8", Per Kilo 9 Kilo 1,166.40 292 Rainboots 30 Piece 16,200.00 293 Rainboots, White 40 Piece 21,600.00 294 Raincoat, Butterfly 2 Piece 1,080.00 295 Raincoat, With Pants 3 Set 1,863.00 296 Record Book, Hard Bound, 150 Pages 20 Piece 1,486.00 297 Ribbon Cartridge, Epson C13s015632, Black, For Lx-310 20 Piece 3,240.00 298 Ribbon Cartridge, Epson S015327, Black, Fx-2175 And Fx-2190 5 Piece 2,329.00 299 Rubber Band, #14 1 Box 229.50 300 Rubber Band, #18 17 Box 6,104.70 301 Ruler, Hard Plastic, 12" 10 Piece 540.00 302 Ruler, Steel, 18" 1 Piece 148.50 303 Scissors, Multi-purpose, 6" 3 Pair 243.00 304 Scissors, Multi-purpose, 8" 17 Pair 1,836.00 305 Scouring Pad, 3pcs/pack 7 Pack 756.00 306 Scouring Pad, With Foam 9 Piece 466.20 307 Screw Driver, Flat Screw 1 Piece 141.40 308 Screw Driver, Philip Screw 1 Piece 141.40 309 Sign Pen, Gel Point, 0.5mm, Black 33 Piece 4,233.90 310 Sign Pen, Gel Point, 0.5mm, Blue 30 Piece 3,849.00 311 Sign Pen, Gel Point, 0.5mm, Green 20 Piece 2,566.00 312 Sign Pen, Gel Point, 1.0mm, Black 10 Piece 1,283.00 313 Sign Pen, Impact Gel, 1.0mm, Black 5 Piece 641.50 314 Soap, Hand Wash Liquid, 500ml/bottle 9 Bottle 2,259.90 315 Solid State Drive, Approx. 240gb, Sata 3 Piece 7,068.90 316 Specialty Paper, 220gsm, A4, 100sheets/bundle 1 Bundle 391.50 317 Specialty Paper, 220gsm, A4, 10sheets/pack 27 Pack 1,385.10 318 Specialty Paper, 220gsm, Long, 100sheets/bundle 1 Bundle 438.80 319 Sponge, Regular, With Scrub Pad 2 Piece 103.60 320 Sprayer Bottle 30 Piece 2,334.00 321 Squeegee, With Handle 2 Piece 512.40 322 Stamp Pad Ink, 30ml/bottle 2 Bottle 121.60 323 Stamp Pad, Big 5 Piece 459.00 324 Stamp, Self Inking, Customized, Big 4 Piece 6,117.20 325 Stamp, Self Inking, Customized, Small 5 Piece 5,493.00 326 Staple Remover, Twin Jaws 1 Piece 35.50 327 Staple Wire, #10, 1000pcs/box 5 Box 81.00 328 Staple Wire, #35, 5000pcs/box 27 Box 2,551.50 329 Stapler, #10, Small 5 Piece 749.50 330 Stapler, #35, Heavy Duty, With Staple Remover 19 Piece 10,260.00 331 Stapler, Heavy Duty Metal, 210sheets Capacity, Desktop 1 Unit 2,970.00 332 Steel Wool, 30g 16 Piece 1,036.80 333 Stethoscope 20 Piece 21,600.00 334 Stick On Notes, 1.3x4.3, 5 Colors X 25sheets/pack 20 Pack 642.00 335 Sticker Paper, A4, Matte, 10sheets/pack 12 Pack 972.00 336 Sticker Paper, Legal, Glossy, 10sheets/pack 3 Pack 243.00 337 Storage Box, Plastic, With Cover, 67 Liters 3 Piece 2,754.00 338 Strainer, Aluminum, Big 1 Piece 562.30 339 Tape Dispenser, Heavy Duty, 1", Desktop 1 Piece 172.80 340 Tape Dispenser, Heavy Duty, 2", Packaging 2 Piece 182.40 341 Tape, Double Sided, 1" 13 Roll 1,614.60 342 Tape, Duct, 2" 11 Roll 2,866.60 343 Tape, Masking, 1" 23 Roll 1,117.80 344 Tape, Packaging, 2" 24 Roll 1,588.80 345 Tissue Paper, 2ply, 12rolls/pack 85 Pack 20,009.00 346 Tissue Paper, 2ply, 9rolls/pack 7 Pack 1,249.50 347 Toilet Bowl And Urinal Cleaner, 900ml/bottle 23 Bottle 4,655.20 348 Toilet Bowl Brush, Metal Handle 6 Piece 550.80 349 Toilet Bowl Brush, Wooden Handle 2 Piece 175.60 350 Toilet Deodorant Cake, 100g 25 Piece 1,740.00 351 Toilet Deodorant Cake, 50g 100 Piece 3,970.00 352 Toilet Suction Pump, Rubber, Wooden Handle 2 Piece 280.80 353 Toner Cartridge, Hp 285a (85a), Black 2 Piece 13,486.60 354 Toner Cartridge, Hp 35a, Black 1 Piece 5,224.50 355 Top Glass, For Office Table 1 Piece 2,106.00 356 Towel, Hand 9" X 15" 11 Piece 415.80 357 Towel, Hand 9" X 15" 20 Unit 756.00 358 Trash Bag, Plastic, Large, 10pcs/pack 78 Pack 5,608.20 359 Trash Bag, Plastic, Medium, 10pcs/pack 64 Pack 3,129.60 360 Trash Bag, Plastic, Xlarge, 10pcs/pack 168 Pack 18,144.00 361 Trash Bag, Plastic, Xxlarge, 10pcs/pack 105 Pack 16,107.00 362 Trash Can, With Cover 5 Piece 1,066.50 363 Ultrasound Gel 10 Piece 13,500.00 364 Used Newspaper 60 Kg 6,090.00

Details: Description Republic Of The Philippines Local Government Unit Of General Santos City Bids And Awards Committee Goods And Consultancy Services City Hall, General Santos City Total Description Of Articles Item No. A1. Catering: 1 Meal And 2 Snacks With Venue Activity Title: City Development Council Meeting Activity Date: January 30, 2025 (tentative) Meal Menu: Soup/appetizer, 2 Main Courses, Rice, Dessert, Bottled Water And Softdrinks Snack Menu: Any Snack Variety With Softdrinks /bottled Water Requirements: Must Be In A Hotel Must Have A Led Wall Must Have A Parking Space That Can Accommodate Up To 40 Cars In A Single Event Venue Must Be Fully Airconditioned And Can Accommodate Up To 112 Pax In A Single Hall/function Room Must Provide 5 7 Microphones, Stable Internet Connection, Free Flowing Coffee And Water Dispenser Non Pork Menu 72,800.00 B1. Catering: 1 Meal And 2 Snacks With Venue Activity Title: Cso Activity Activity Date: January 27, 2025 (tentative) Meal Menu: Soup/appetizer, 2 Main Courses, Rice, Dessert, Bottled Water And Softdrinks Snack Menu: Any Snack Variety With Softdrinks /bottled Water Requirements: Must Be In The Central Business District Of The City Must Have A Parking Area That Can Accommodate Up To 20 Vehicles Fully Airconditioned Venue Non Pork Menu Inclusions: Projector, At Least 4 Microphones, Stable Internet Connection, Free Flowing Coffee And Water Dispenser 32,500.00 B2. Catering: 1 Meal And 2 Snacks With Venue Activity Title: Department Operations Review Activity Date: January 31, 2025 (tentative) Meal Menu: Soup/appetizer, 2 Main Courses, Rice, Dessert, Bottled Water And Softdrinks Snack Menu: Any Snack Variety With Softdrinks /bottled Water Requirements: Must Be In The Central Business District Of The City Must Have A Parking Area That Can Accommodate Up To 20 Vehicles Fully Airconditioned Venue Non Pork Menu Inclusions: Projector, At Least 4 Microphones, Stable Internet Connection, Free Flowing Coffee And Water Dispenser 45,500.00 Page 2 Of 5 24cb Gsc 588 Total Description Of Articles Item No. B3. Catering: 1 Meal And 2 Snacks With Venue Activity Title: Gad Orientation/meeting Activity Date: January 28, 2025 (tentative) Meal Menu: Soup/appetizer, 2 Main Courses, Rice, Dessert, Bottled Water And Softdrinks Snack Menu: Any Snack Variety With Softdrinks /bottled Water Requirements: Must Be In The Central Business District Of The City Must Have A Parking Area That Can Accommodate Up To 20 Vehicles Fully Airconditioned Venue Non Pork Menu Inclusion: Projector, At Least 2 Microphones, Stable Internet Connection, Free Flowing Coffee And Water Dispenser 13,000.00 C1. Catering: 1 Meal And 2 Snacks With Venue Activity Title: Gad Orientation/seminar/training Activity Date: January 2025 (tentative) Meal Menu: Soup/appetizer, 2 Main Courses, Rice, Dessert, Bottled Water And Softdrinks Snack Menu: Any Snack Variety With Softdrinks /bottled Water Inclusion: Projector, At Least 2 Microphones, Stable Internet Connection, Free Flowing Coffee And Water Dispenser 39,000.00 C2. Catering: 1 Meal And 2 Snacks With Venue Activity Title: Mid Year Operation Review Activity Date: March 2025 (tentative) Meal Menu: Soup/appetizer, 2 Main Courses, Rice, Dessert, Bottled Water And Softdrinks Snack Menu: Any Snack Variety With Softdrinks /bottled Water Inclusion: Projector, At Least 2 Microphones, Stable Internet Connection, Free Flowing Coffee And Water Dispenser 42,250.00 D1. Catering: 1 Meal And 2 Snacks With Venue Activity Title: Gad Orientation Activity Date: (tentative Date) January 29, 2025 Meal Menu: Soup/appetizer, 2 Main Courses, Rice, Dessert, Bottled Water And Softdrinks Snack Menu: Any Snack Variety With Softdrinks /bottled Water Inclusion: Projector, At Least 2 Microphones, Stable Internet Connection, Free Flowing Coffee And Water Dispenser 58,500.00 E1. Catering: 1 Meal And 2 Snacks With Venue Activity Title: Orientation On Psa Laws & Issuances For Lcr Stakeholders Activity Date (tentative): March 21, 2025 Meal Menu: Soup/appetizer, Vegetable With Chicken. Seafoods/beef, Rice, Dessert, Softdrinks Snack Menu: Any Snack Variety With Juice Inclusion: Must Have: Lcd Projector & Screen Basic Sound System With At Least 3 Wireless Microphones (with Batteries That Can Last An 8 Hour Activity) Strong & Stable Internet Connection Free Flowing Coffee And Water Dispenser Tables & Chairs With Lenin Arrangements Directional Signage Requirements: Venue/catering Should Be In A Hotel Which Is: * 3 Minutes Ride From Local Civil Registrar's Office To The Venue * Located Within The Business District * 1.3 Kms. From The Lcr Office * With A Fare Of P15.00/pax * A Convention Center With A Fully Airconditioned Hall * With A Lobby & Receiving Area * With A Spacious Session Hall * Secured & Spacious Parking Area/space * With Standby Service Waiters And Audio Visual Technicians Who Will Respond For The Needs Until The End Of The Activity. 45,500.00 Page 3 Of 5 24cb Gsc 588 Total Description Of Articles Item No. F1. Catering: 1 Meal And 2 Snacks With Venue Activity Title: Admin Division Quarterly Meeting Activity Date: February 2.25 (tentative) Meal Menu: Soup/appetizer, 2 Main Courses, Rice, Dessert, Bottled Water And Softdrinks Snack Menu: Any Snack Variety With Softdrinks /bottled Water Inclusion: Projector, At Least 2 Microphones, Stable Internet Connection, Free Flowing Coffee And Water Dispenser 22,750.00 F2. Catering: 1 Meal And 2 Snacks With Venue Activity Title: Monthly Dpmt Meeting Activity Date: January 2025 February 2025 March 2025 Meal Menu: Soup/appetizer, 2 Main Courses, Rice, Dessert, Bottled Water And Softdrinks Snack Menu: Any Snack Variety With Softdrinks /bottled Water Inclusion: Projector, At Least 2 Microphones, Stable Internet Connection, Free Flowing Coffee And Water Dispenser 29,250.00 F3. Catering: 1 Meal And 2 Snacks With Venue Activity Title: Training For Cswdo Staff Activity Date: March 2025 Meal Menu: Soup/appetizer, 2 Main Courses, Rice, Dessert, Bottled Water And Softdrinks Snack Menu: Any Snack Variety With Softdrinks /bottled Water Inclusion: Projector, At Least 2 Microphones, Stable Internet Connection, Free Flowing Coffee And Water Dispenser 78,000.00 G1. Catering: 1 Meal And 2 Snacks With Venue Activity Title: Coordination Meeting Activity Date: Tentative Dates Meal Menu: Soup/appetizer, 2 Main Courses, Rice, Dessert, Bottled Water And Softdrinks Snack Menu: Any Snack Variety With Softdrinks /bottled Water Inclusion: Projector, At Least 2 Microphones, Stable Internet Connection, Free Flowing Coffee And Water Dispenser Bac Control No. 63434 32,500.00 The Local Government Unit Of General Santos City Now Invites Bids For The Supplies And Delivery Of Catering Services: 1 Meal And 2 Snacks With Venue. Delivery Of The Goods Is Required On The Day Of Activity. Bidders Should Have Completed, Within 3 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders) Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non Discretionary "pass/fail" Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. Prospective Bidders May Obtain Further Information From Local Government Unit Of General Santos City And Inspect The Bidding Documents At The Address Given Below During Monday To Friday, 8:00 Am To 5:00 Pm Except On Holidays. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders Starting November 19, 2024 12:00 Noon From The Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 1,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Either In Person, By Facsimile, Or Through Electronic Means. Page 4 Of 5 24cb Gsc 588 *24cb Gsc 588* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production The Local Government Unit Of General Santos Will Hold A Pre Bid Conference On None/not Required At Bids And Awards Committee Office 4th Floor, Left Wing, City Action Investment Center, General Santos City, Which Shall Be Open To Prospective Bidders. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before November 26, 2024 12:00 Pm. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of Acceptable Forms And In The Amount Stated In Itb Clause 14. Bid Opening Shall Be On November 26, 2024 2:00 Pm At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders Representatives Who Choose To Attend The Activity. The Local Government Unit Of General Santos City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: _______________________________ Atty. Francisco M. Gacal Chairperson, Bac Goods And Consulting Services

Details: Description 1 Security Services Security Services Description Schedule Of Requirements A. Covering The Period From 01 January 2025 To 31 December 2025. B. Three (3) Regular Security Guards With 8 Hours Shifting To Complete The Services Of 24 Hours / 7 Days A Week. C. One (1) 9mm Caliber Pistol With Ammunition And Accessories. Firearms Should Be In Good Conditions, Covered With License By Pnp-feo With Complete Load And Ammunition. D. One (1) Handheld Metal Detector. E. One (1) Portable Flashlight. F. One (1) Rechargeable Emergency Light. G. One (1) Handcuff. H. One (1) Rattan Baton. Qualification Requirements Of Security Service Provider I. The Security Provider Shall Have The Necessary Experience And Expertise In Providing Security Services. Ii. The Security Guards Must Be Duly Licensed, Properly Skilled/trained, Of Good Moral Character, Psychologically, Mentally And Physically Fit, And With The Following Minimum Qualifications: (i) Filipino Citizen; (ii) Not More Than 45 Years Old; (iii) Must Have Completed At Least A High School Graduate; (iv) The Service Provider Shall Also Submit The Following Documentary Requirements Prior Posting: Certificate From Any Accredited Security Training Institute Of The Private Security Licensing Of Pnp, Nbi Clearance; Pnp Clearance; Barangay Clearance; Physical/medical/health Certificate; Psychoneurotic Test; And Personal Data Sheet; (v) Perform Other Tasks That Maybe Assigned From Time To Time. Iii. The Security Provider Shall Be Responsible In Supervising And Monitoring The Security Guards Deployed At The Lewadi To Ensure That They Efficiently Perform Their Duties And Responsibilities As Herein Provided. Iv. The Security Provider Shall Ensure That Security Guards Are To Be Provided With Proper Uniforms And Paraphernalia, Firearms And Ammunitions And Other Basic Equipment As Provided In Ra No. 5487 Including Security Related Equipment And Vehicles In Accordance With Schedule Of Requirements. V. The Security Services Shall Cover All Lewadi Offices But Not Limited To The Following: (a) Conduct Security Checks Of All Visitors Entering The Office Building; (b) Monitor The Entry Of All Officials, Employees And Visitors And Logs Their Arrival And Departure; (c) Conduct Three (3) Roving Inspection During Night-time To Prevent Incidence Of Theft Or Fire; (d) Unplug Computers And Office Equipment During Night-time Except Equipment In The Data Center / Cctv; (e) Conduct Regular Roving Inspection Of The Lewadi Vehicles At The Parking Lots; (f) Implement Minimum Health And Safety Protocols For The Prevention Of Covid-19 Such As: Checking Of Body Temperature And Scanning Of Ccts Code; (g) Perform Other Tasks That Maybe Assigned From Time To Time. Vi. The Security Provider Shall Provide, At Its Own Expense, All The Necessary Supplies Of The Security Guards Deployed At The Lewadi Office. Vii. The Security Provider Shall Submit Every Month To The Lewadi A Photocopy Of The Logbook Of Officials, Visitors And Employees. Viii. Submit Its Own Security Plan Which Includes Covid-19 Protocol In Workplace For The Purpose Of Maintaining Law And Order At The Lewadi Offices Even At Times Of Pandemic. The Security Plan Shall Be Submitted Within 5 Days After The Issuance Of Notice To Proceed. Ix. The Security Provider Shall Assume Full Responsibility For The Faithful And Complete Performance By The Security Guards Of All Their Duties Pursuant To The Provisions Of This Contract. X. The Security Provider Shall Be Able To Respond To Security Issues Within Three (3) Hours From Receipt Of Notification. In Case Of Delays In The Three (3) Hour Response Time, Corresponding Penalties Or Liquidated Damages Will Be Implemented. Xi. In Case Of Emergencies Or Urgent Security Concerns Within The Office Premises, The Security Guards Should Respond Immediately. Xii. The Security Provider Shall Guarantee That All Security Guards Follow All Regulations, Policies, Security Programs And Plans As Contained In The Approved Security Plan To Continuously Improve Their Performance, Efficiency, Discipline, Fitness And Preparedness, And Warrants That All Security Guards Shall Observe The Highest Courtesy And Respect Towards All Officials And Employees Of Lewadi Including Authorized Visitors In The Execution Of Their Duties. Xiii. The Security Provider Shall Submit Promptly Every Morning To Lewadi The Shift Guard Mounting Reports, As Well As Reports Of All Incidents Of Loss, Injury And Damage To Life And Property, Involving Lewadi’s Property And Personnel That Occurred During The Previous Day. Xiv. The Security Provider Shall Provide Monthly Security Shifting Schedule To Be Approved By The Lewadi In Order To Exercise Effective Administration, Control, Supervision And Inspection, To Prevent Any Violation Or Commission Of Anomalous Acts By The Guards, Whether On Or Off Duty. Security Provider Shall Be Liable For Any Willful, Intentional Or Negligent Act Or Omission Of The Guards Resulting In Death/injury To Lewadi’s Personnel Or Visitors Within Lewadi Areas. In Case Of Absences And Non-reliever, The Lewadi Has The Right To Deduct Equivalent Amount In Its Monthly Billing. Xv. The Security Provider Shall Ensure That In No Case Shall The Security Guard Render Services For More Than An 8-hour Shift. Xvi. The Security Provider Shall Comply With Existing Applicable Labor Laws, Rules And Regulations And Warrant The Payment Of Salaries And Allowances And All Other Benefits To Its Security Personnel Within Legal Rates Provided Under Dole Department Order No. 150-16 And Other Related Laws And All Other Legal Benefits Of Its Employees. 2 Janitorial Services Janitorial Services Description Services Items/areas To Be Cleaned Frequency Minimum Requirement A. Janitorial Services 1. Sweeping, Mopping, Spot Scrubbing Floor Areas Of The Office Building Daily 2. Dusting/damp Wiping And Polishing Vertical And Horizontal Surfaces; Tables; Chairs; Cabinet; Racks; Computers /printers And Other Furniture /equipment Daily 3. Trash Removal: Emptying And Cleaning Of Waste Cans /baskets And Proper Disposal Of Garbage Waste Cans And Baskets Daily /at The End Of The Day 4. Cleaning, Deodorizing And Disinfecting Comfort Rooms, Washrooms And Pantries Daily 5. Cleaning Window Blinds; Drinking Water Dispensers; Shelves Or Filing Cabinet Daily 6. General Cleaning All Areas Every Saturday B. Miscellaneous Services 1. Carrying Or Hauling Of Furniture And Fixtures, Supplies, Records, Etc. As Needed 2. Other Janitorial Activities And Related Services That Maybe Assigned From Time To Time By Lewadi Officials And Employees. As Needed 3. Reporting Of All Breakage And Electrical Malfunctions, Plumbing, Necessary Repair Works, Etc. Immediately C. Qualification Of Janitors / Utilities 1. Filipino Citizen 2. Male Or Female 3. Not Less Than 18 Years Old 4. At Least High School Graduate 5. Well-trained, Physically And Mentally Fit, Of Good Moral Character And Covered By Appropriate Clearances From Doh-accredited Health Centers, Nbi, Police And Barangay 6. Agency Training On Proper Housekeeping, Cleaning And Use Of Janitorial Equipment D. Scope Of Undertaking 1. Janitorial Services Shall Render Eight (8)-hour Work Per Day, Six (6) Days A Week (monday To Saturday) In Accordance With The Scope Of Service/work, Standards, Approved Janitorial Plan And Manpower Compliment And Deployment Plan. 2. In The Event Of Resignation, Absence With Or Without Authorized Leave Of The Janitor, The Service Provider Undertakes To Deploy A Substitute/replacement Immediately, Without Need Of Demand From The Lewadi. In Case Of Failure Of The Service Provider To Comply With This Term, The Lewadi Has The Right To Deduct The Corresponding Payment From The Monthly Billing. 3. The Service Provider Shall Endorse And Submit The Names And Information Of The One (1) Utility Personnel That Will Be Deployed In Lewadi And One (1) Utility Substitute /replacement. 4. The Service Provider Shall Be Responsible In Supervising And Monitoring Its Employees To Ensure That They Efficiently Perform Their Duties And Responsibilities As Herein Indicated. 5. The Service Provider Shall Maintain Satisfactory Level Of Performance Throughout The Duration Of The Contract As Prescribed In Gppb Resolution No. 24-2007 Dated September 28, 2007. The Performance Assessment Shall Be Done Every Six (6) Months. 6. The Technical Proposal Of Prospective Bidders Shall Also Be Evaluated In Terms Of The Bidder’s Technical Competence To Deliver Efficient And Quality Security Services To The Procuring Entity Prescribed In The Gppb Resolution No. 24-2007 (september 28, 2007). E. Duties And Responsibilties Of The Service Provider 1. Provide And Deliver, At Its Own Expense All The Required Services Such As Personnel To The Lewadi At The Start Of Operations, Without Need For Demand. 2. The Service Provider Shall Be Held Responsible For Any Damage/destruction To Any Office Furniture And Fixtures, Equipment, And Plumbing Fixtures Due To The Fault Or Negligence Of Its Personnel. 3. Observe Office Rules And Regulations Prescribed By The Lewadi Including Subjecting All Janitors To Appropriate Security Inspection Every Time They Enter And Leave The Premises. 4. The Service Provider Shall Comply With Existing Applicable Labor Laws, Rules And Regulations And Warrant The Payment Of Salaries And Allowances To Its Personnel Within Legal Rates Provided Under Applicable Laws, Rules And Regulations. 5. Statutory Increase In Salaries, Allowances, Benefits, Additional Compensation Shall Be Borne By Lewadi But The Agency Fee Shall Not Be Included In The Computation Of The Increase. 6. Require Their Employees To Always Wear The Prescribed Uniform, Identification Card And Safety Gadgets. 7. The Service Provider Must Provide All Necessary Equipment And/or Transportation Services, If Necessary, To Its Personnel In Case Of Community Emergencies Or Calamities To Continuously Provide Its Service To Lewadi. 8. The Lewadi, Through Its Administrative Services Section Shall Monitor The Implementation Of The Utility Services In Accordance With The Specifications And Conditions Of The Contract. 9. Payment By Lewadi To The Service Provider Shall Be On A Monthly Basis Upon Submission Of Billing Statement And Acceptance Of Output Of The Service Provider In Compliance With The Provision Of Labor Laws, Rules And Regulations. 10. In Case Of Violation Of Any Of The Provisions Of This Contract, The Lewadi Shall Issue Written Notice To The Service Provider Of The Violation On The Provisions Of This Contract With Corresponding Penalties: (a) 1st Offense: Verbal Warning Thru Utility Personnel; (b) 2nd Offense: Written Warning; (c) 3rd Offense: Termination Of Contract And Liquidated Damages In Accordance To Government Rules And Regulations.

Details: Description Invitation To Bid For Fy 2024 Procurement And Delivery Of Learning Tools And Equipment For Technical Vocational Livelihood (tvl) Project Identification No.: Pb-albaygoods-24-23 1. The Department Of Education, Schools Division Office Of Albay, Through The General Appropriations Act Of 2024 Intends To Apply The Sum Of Philippine Pesos Twenty Two Million Six Hundred Twenty Three Thousand Nine (php 22,623,009.00) Only Being The Abc As Payment For The Above-mentioned Contract. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Unit Of Measure Quantity Item Description Estimated Unit Cost (php) Estimated Cost (php) Fy 2024 Procurement And Delivery Of Learning Tools And Equipment For Technical Vocational Livelihood (tvl) 19 Pc Air Compressor With Airbrush Cake Decorating Set. Type L Single Cylinder Piston Compressor Body Shape : Cylindrical In Shape Material: Copper, Aluminum Dimension: (l X W X H) 24 Cm X 13 Cm X 17 Cm (minimum) Power Source: 220 Volts Ac, 60 Hz With Power Cord 1.5 Meters Long Minimum With Attachment Standard Male Plug Type A Or Provide An Adopter Plug Power Rating : 1/6 Hp Motor Capacity: Air Pressure Adjustment Range 0 To 57 Psi. Automatic On/off Shutoff Compressor Must Have Oil Filter, Water Trap Filter, Pressure Regulator With Gauge, And With Mounted Airbrush Holder And With Built In Cooling Fans Airbrush Specifications: A) Airbrush Material: Stainless Steel Body; B) Needle Dia.: 0.3 Mm. C) Cup Capacity: 2 Cc (cubic Centimeter); D) Airbrush With A 1/3 Oz. Gravity Fluid Cup; E) Nozzle That Allow To Spray From Hairline Up To 1 1/2 Inches Wide; F) Operating Pressure: 15-57 Psi. G) Rubber Hose Length: 2-meter (minimum) H.) Air Flow: 20 Liters/min. Package Content; 1 Pc Air Compressor, 1 Set Air Brush Kit With Case, 5 Ft- Rubber/vinyl Hose, 5 Pcs Cleaning Brushes In Different Width, Tools And User’s Manual. Comes With User's Manual That Content: Operation Guide, Maintenance/ Troubleshooting Procedure And List Of Parts. 10,000.02 190,000.38 114 Pc Beater. Body Shape: Circular Handheld Mixer Materials: Stainless Steel With Plastic Grip Dimension: L-28 Cm X Width-7 Cm (minimum) Twin Beater Designed For Mixing Preferably With Packing Case Smooth Motion Gear And Durable Mechanism Dishwasher Safe And Rust Free 475.00 54,150.00 114 Set Board, Chopping, 6 Color. Type: Food Grade Body Shape: Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 38 Cm (minimum) Width: 30 Cm (minimum) Thickness: 1.27 Cm (minimum) Color-coded For Use With Different Types Of Food, Blue, Red, Yellow, Green, Brown And White, 3,300.00 376,200.00 19 Pc Boiler, Double. Material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) Must Be A Set Which Includes One (1) Saucepan, One (1) Boiler, And One (1) Lid With Stainless Steel Handle And Smooth Surfaces With No Sharp Edges 2,465.00 46,835.00 228 Set Bowl, Mixing (6 Pcs/set). Type: Mixing Bowl Set Body Shape: Round Material: Stainless Steel, 0.8 Mm - 1.0 Mm Thick Each Set Must Consist Of The Following Capacities 1 Pc - 0.70 Liter 1 Pc - 1.5 Liters 1 Pc - 3 Liters 1pc - 4 Liters 1pc - 5 Liters 1pc - 8 Liters Light Weight And Easy To Use, Flat Base, Curved Lip Preferably With Packing Case. Dishwasher Safe. 2,440.00 556,320.00 114 Set Cake Pans, Round #4, #6, #8, #10, #12, #14, #16. Type: Round Pan Body Shape: Round Material: Anodized Aluminum Thickness: 1.29 Mm Thick (minimum) Depth: 2 Inches (50.8 Mm) (minimum) Set Must Each Contain The Following Diameter: 1 Pc - 6 Inches (152.4 Mm) Diameter (minimum) 1 Pc - 8 Inches (203.2 Mm) Diameter (minimum) 1 Pc - 10 Inches (254 Mm) Diameter (minimum) 1 Pc - 12 Inches (304.8 Mm)diameter (minimum) 1 Pc - 14 Inches (355.6 Mm) Diameter (minimum) 1 Pc - 16 Inches (406.4 Mm) Diameter (minimum) Preferably Packed (6 Pcs Per Set) Rolled Edge For Better Strength And Smooth Surface With No Sharp Edges The Materials Used Must Be Non-toxic. 3,650.00 416,100.00 114 Pc Cake Stand, With Tier. - Circular With 3 Tier. Hard Plastic, Polypropylene, 4 Mm Thick. The Tier Consists Of The Following Sizes: Tier 1: 18 Cm Diameter (minimum) Tier 2: 25 Cm Diameter (minimum) Tier 3 : 30 Cm Diameter (minimum) Column Diameter: 20 To 30 Mm (solid) Distance Between Tiers: 15 Cm Over-all Length: 30 Cm (minimum) 3,047.33 347,395.62 57 Pc Cake Turn Table. Material: Cast Aluminum Plate And Cast Iron Base Upper Plate: 30 Cm Diameter (minimum) And 1.4 Cm Thickness (minimum)base Dimensions: 18 Cm (minimum); 1.4 Cm Thickness (minimum) Total Height: 10 Cm To 15 Cm 2,500.00 142,500.00 247 Pc Coupler. Body Shape: Tubular Material: Hard Plastic, Polypropylene, Any Bright Color Height: 3cm (minimum) Top Diameter: 1.27 Cm (minimum) Bottom Diameter: 2.54 Cm (minimum) Preferably With Storage Case 265.00 65,455.00 228 Pc Cup, Measuring (for Solid). Type: Measuring Cup Set Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick (minimum) Each Set Contains The Following: 1 Pc - 1 Cup (237 Ml) 1 Pc - 1/2 Cup (118 Ml) 1 Pc - 1/3 Cup (79 Ml) 1 Pc - 1/4 Cup (59 Ml) Handle Dimension: Length-12 Cm X Width-1 Cm (minimum) Measuring Capacity Engraved On The Handle Strip Handles Have Provision For Hanging Preferably With Packing Case Smooth Surfaces And Dishwasher Safe 575.00 131,100.00 228 Pc Cup, Measuring, 250 Ml For Liquid. Type: Clear Glass Cup Body Shape: Round Material: Clear, Non-porous Tempered Glass Capacity: 250 Ml (with 10 Ml Or 50 Ml Increments) With Permanent Graduation Markings Specified Metric And English System Of Measurement With Handle & Spout For Easy Pouring Preferably With Packing Case Food Grade And Safe Use To Microwave, Freezer And Dishwasher 885.00 201,780.00 228 Pc Cup, Measuring, 500ml For Liquid. Type: Clear Glass Cup Body Shape: Round Material: Clear, Non-porous Tempered Glass Capacity: 500 Ml (with 10 Ml Or 50 Ml Increments) With Permanent Graduation Markings Specified Metric And English System Of Measurement With Handle & Spout For Easy Pouring Preferably With Packing Case Food Grade And Safe Use To Microwave, Freeze And Dishwasher 1,150.00 262,200.00 19 Pc Cutter, Dough. Type: Scrapper Body Shape: Straight Blade Material: Stainless Steel Straight Blade With Stainless Steel Handle Blade Dimension: Length : 15 Cm X Width: 11 Cm X Thickness: 1.2 Mm(minimum) Handle Dimension: Length: 15 Cm X Diameter: 3 Cm (minimum) Preferably With Packing Case Food Grade And Dishwasher Safe Design Allows Item To Be Hung For Storage 620.00 11,780.00 114 Pc Cutter, Pie. Type: Pie Cutter Wheel Knife Body Shape: Round Wheel Roller Material: Stailess Steel Overall Length: 19.5 Cm (minimum) Wheel Diameter: 6.5 Cm (minimum) With Hanging Hook At The Tip Of The Handle For Hanging Storage High Quality Food Grade Stainless Steel, High Strength, Good Hardness Preferably With Packing Case Comes With Finger Protection And Not Easily Deformed, Anti-corrosion. Dishwasher Safe. 620.00 70,680.00 114 Pc Flour Sifter, Hand Cranked. Body Shape: Round Shape Material: Stainless Steel Dimension: Diameter: 133.3 Mm (minimum) X Height: 165 Mm (minimum) Thickness: 0.79 Mm (minimum) (body) And Constructed With Stainless Steel Wire Mesh # 30 Bottom Volume Markings Should Be Seen Inside And Outside Of The Sifter Capacity: 5 Cups (1.18 Liter) Spring Action Squeeze Handle Stainless Steel Preferably With A Packing Case. Dishwasher Safe. 500.00 57,000.00 114 Pc Grater. Type: Four-sided Box Grater Body Shape: Box In Shape Material: Stainless Steel Blade And Plastic (polypropylene Handle) Grater Dimensions: Height- 25 Cm X Width-13 Cm X Depth-10 Cm (minimum) Side 1: Large-hole Shredder With 6 Mm Hole Side 2: Slicer Side 3: Small-hole Shredder With 3 Mm Hole Side 4: Grater With Strips About 1.27 Cm To 2.54 Cm Length Preferably With Packing Case. Food Grade & Dishwashing Safe 350.00 39,900.00 114 Pc Knife, Kitchen. Blade Material: Stainless Steel 316. Must Be Branded. 500.00 57,000.00 114 Pc Knife, Pallet. Type: Pallete Knife Body Shape: Offset Blade Blade Material: Stainless Steel 316 Handle Material: Hardwood (smooth Finish) With Rivets Overall Length: 30.5 Cm - 35.6 Cm Total Length: Blade Dimension: Length- 17 Cm X Width-3.8 Cm (minimum) Thickness Of Blade: 1.7 Mm Thick (minimum) Preferably With Packing Case Dishwasher Safe. Must Be Branded. 450.00 51,300.00 114 Pc Ladle, 3 Oz. Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 28 Cm (minimum) Capacity: 3 Oz. (85 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case Dishwasher Safe. Must Be Branded. 300.00 34,200.00 114 Pc Loaf Pan, Big. Type: Loaf Pan Body Shape: Rectangular Material: Anodized Aluminum Thickness: 1.5 Mm - 2 Mm Length: 25.4 Cm (minimum) Width: 12.7 Cm (minimum) Depth: 7.62 Cm (minimum) Preferably With Packing Case Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges Food Grade And Oven Safe. Must Be Branded. 700.00 79,800.00 114 Pc Loaf Pan, Medium. Body Shape: Rectangular Material: Anodized Aluminum Thickness: 1.5 Mm - 2 Mm Length: 22.86 Cm (minimum) Width: 11.43 Cm (minimum) Depth: 6.9 Cm (minimum) Preferably With Packing Case Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges Food Grade & Oven Safe. Must Be Branded. 650.00 74,100.00 114 Pc Loaf Pan, Small. Type: Loaf Pan Body Shape: Rectangular Material: Anodized Aluminum Thickness: 1.5 Mm - 2 Mm Length: 17.78 Cm (minimum) Width: 7.62 Cm (minimum) Depth: 5.48 Cm (minimum) Preferably With Packing Case Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges Food Grade And Oven Safe Must Be Branded. 600.00 68,400.00 114 Pc Muffin Pan, Big. Type: Muffin Pan Body Shape: Rectangular Material: Anodized Aluminum Thickness: 1.5 Mm (minimum) Dimension: Length-36.6 Cm X Width-22.9 Cm X Height-7.6 Cm (minimum) Cup Size: Height- 8.2 Cm X Diameter 8.9 Cm (minimum) Number Of Cups In A Tray: 6 Cup Preferably With Packing Case Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges Food Grade. Must Be Branded. 800.00 91,200.00 114 Pc Muffin Pan, Medium. Type: Muffin Pan Body Shape: Rectangular Material: Anodized Aluminum Thickness: 1.5 Mm (minimum) Dimension: Length-40 Cm X Width-27.9 Cm X Height-2.8 Cm (minimum) Cup Size: Heigth-5.2 Cm X Diameter 6.9 Cm (minimum) Number Of Cups In A Tray: 12 Cup Preferably With Packing Case. Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges Food Grade. Must Be Branded. 700.00 79,800.00 114 Pc Muffin Pan, Small. Type: Muffin Pan Body Shape: Rectangular Material: Anodized Aluminum Thickness: 1.5 Mm (minimum) Dimension: Length 40.6 Cm X Width-25.4 Cm X Height 2.8 Cm (minimum) Cup Size: Heigth-2.5 Cm X Diameter 3.8 Cm (minimum) Number Of Cups In A Tray: 24 Cup Preferably With Packing Case Extended Sides For An Easy Grip And Smooth Surfaces With No Sharp Edges Food Grade. Must Be Branded. 600.00 68,400.00 114 Pc Pie Pan, 10 Inches Diameter. Type: Pie Pan Body Shape: Round Material: Aluminum, 0.81 Mm Thick (minimum) Diameter -10 Inches (254 Mm) Minimum Depth: 1.25 Inches (31.75 Mm) Minimum Coated With Non-stick Coating Materials Preferably With Packing Case Oven Safe To 500°f / 260°c Food Grade Smooth Finish Surfaces Without Sharp Edges Extended Sides For An Easy Grip. Must Be Branded. 525.00 59,850.00 114 Set Pie Pan, #6, #8, #10 (set). Type Pie Pan Body Shape: Round Material: Aluminum, 0.81 Mm Thick (minimum) 1) # 10 Diameter: 10 Inches (254 Mm) Minimum 2) # 8 Diameter: 8 Inches(203 Mm) Minimum) 3) #6 Diameter: 6 Inches (152 Mm) Minimum Depth: 1.5 Inches (38.1 Mm) Minimum Oven Safe To 500°f / 260°c Coated With Non-stick Coating Materials Preferably With Packing Case Food Grade Smooth Finish Surfaces Without Sharp Edges Extended Sides For An Easy Grip. Must Be Branded. 850.00 96,900.00 114 Pc Pillars, Cake. Type: Cake Pillars, Food Grade Body Shape: Tubular Material: Crystal Clear Fiber Plastic Tube Diameter: 2.5 Cm (minimum) Base And Top Diameter: 3.5 Cm (minimum) Height: 13 Cm (minimum). Packed In Four (4) Pcs Per Set The Materials Used Must Be Non-toxic. Must Be Branded 400.00 45,600.00 76 Pc Rectangular Pan, 1 X 8. Type: Rectangular Pan Body Shape: Square Inn Shape Material: Anodized Aluminum Thickness: 1.63 Mm Thick, Minimum Dimensions: Length- 8 Inches X Width- 8 Inches X Height- 1 Inch (minimum) Oven Safe To 500°f / 260°c Preferably With Packing Case Food Grade And Dishwasher Safe. Must Be Branded. 450.00 34,200.00 114 Pc Rolling Pins. Type: Rolling Pins Body Shape: Tubular In Shape Material: Hardwood (solid Wood In Natural Color) Roller Dimensions: 2.5 Inches Diameter X 9.5 Inches Length (minimum) Handle Dimension: 1 Inch Diameter X 4 Inches Length (minimum) Overall Length: 17.5 Inches (minimum) The Wood Rolling Pin Boasts Rust Proof Nylon Bearings For Smooth Rolling Action Smooth Rotation Of The Revolving Barrel Preferably With Packing Case Smooth Surface Finish With No Sharp Edges Materials Used Must Be Food Grade. Must Be Branded 350.00 39,900.00 114 Pc Rubber Scraper. Type: Rubber Scraper Body Shape: Flat Material: Silicone Blade (head) & Plastic Handle (polypropylene) Color: Any Color Head Length: 11.5 Cm (minimum) Head Width: 7.0 Cm (minimum) Handle Length: 24 Cm To 30 Cm Preferably With Packing Case Safe Working Temperature: -40°f To 446°f The Materials Used Must Be Non-toxic. Must Be Branded 320.00 36,480.00 114 Pc Sauce Pan. Type: Sauce Pan Body Shape: Round In Shape Material: Stainless Steel With Aluminum Core Dimension: Diameter- 16 Cm X Height-8 Cm (minimum) Thickness: 1.8 Mm Thick (minimum) Riveted Stainless Steel Handle Length: 15 Cm (minimum) Capacity: 1 Quart (minimum) Preferably With Packing Case With Stainless Steel Cover, Safe For The Stove, Oven, Broiler And Dishwasher Safe The Materials Used Must Be Non-toxic. Must Be Branded 750.00 85,500.00 114 Pc Sheet Pan. Type: Sheet Pan Body Type: Rectangular Material: Aluminum Thickness: 0.91 Mm Thick (minimum) Dimension: Length-22 Inches X Width-16 Inches X Height-1 Inch (minimum) Preferably With Packing Case Smooth Finish Surfaces Without Sharp Edges Corrosion Resistant Superior Heat Conduction Oven Safe To 500°f / 260°c (maximum) Food Grade Must Be Branded. 350.00 39,900.00 475 Set Spoon, Measuring (set). Type: Measuring Spoon Body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. ( 7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) 335.00 159,125.00 114 Pc Spoon, Wooden. Type: Wooden Spoon Body Shape: Oval Material: Hardwood Dimensions: Length- 10 Inches X Width- 2 Inches (minimum) Bowl Dimension: Length -3 Inches X Width 2 Inches X Depth -3/4 Inches (minimum) Total Length: 10 Inches (minimum) Preferably With A Packing Case Smooth Surface Finished And No Sharp Edges Handle With Provision For Hanging Storage Purposes Must Be Branded 265.00 30,210.00 114 Pc Strainer. Type: Strainer, Medium Fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 7 Cm (minimum) Handle Length: 18 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Strainer’s Two Layers Of Tightly Woven Mesh Catches Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe. Must Be Branded. 450.00 51,300.00 380 Pc Tip, Decorating. Type: Tube Tips Body Shape: Nozzles With Different Shape Material: Stainless Steel Tube Height: 3.5 Cm To 5 Cm Tube Diameter: 2 Cm To 3.5 Cm Thickness: 0.5 Mm (minimum) Tube Tip: Assorted Designs (create Swirls, Rosettes, Flowers, Roping, Stars, Leaves And Other Designs Comes With 24 Different Shapes Of Nozzles Packed In Plastic Storage Box 895.00 340,100.00 114 Pc Weighing Scale, 10 Kgs. Must Be Branded. 1,632.00 186,048.00 114 Pc Weighing Scale, 5kgs Digital. Type: Mechanical Weighing Scale Body Type: Circular Bowl Material: Stainless Steel Bowl And Metal Body (coated) Mechanism Type: Spring Lever Capacity: 5 Kg /11 Lb. Sensitivity/graduated By 10 Gm Measurement Units: Gram/kilogram Manual Setting On Zero, Must Be Accurate And Durable Calibrate The Scale Using The Adjustment Knob Preferably With A Packing Case Delivery Must Include Instruction Manual Written In Good English With Service Centers Located In The Major Cities In The Philippines Warranty Period Of 1 Year (parts And Service). Must Be Branded 890.00 101,460.00 114 Pc Wire Whisk, Medium. Type Wire Whisk, Medium Body Shape: Ballon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 25.4 Cm X 7 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe. Must Be Branded. 500.00 57,000.00 24 Pc Apple Corer. Body Shape: Tubular Material: Stainless Steel Total Length: 18 Cm (minimum) Handle Material: Hard Plastic, Polypropylene Handle Dimension: Length-10 Cm X Diameter-2 Cm (minimum) Blade Size: Length-8cm X Diameter-2 Cm (minimum) Preferably With Packing Case. Dishwasher Safe. 350.00 8,400.00 12 Pc Bain Marie, Table. (food Warmer) Body Shape: Rectangular Material: 304 Stainless Steel, 0.8 Mm Thick (minimum) Dimensions: Length-1500 Mm X Width-700mm X Height-800 Mm (minimum) Power Source: Voltage: 220 Volts - 230 Volts, 50 Hz/ 60 Hz With Royal Cord 1.5 Meter Long With Attachment Standard Type A Male Plug Or Provide Plug Adopter 10a/220v 16,000.00 192,000.00 8 Pc Blender, Electric. Body Shape: Round Jar Material Housing: Plastic (polypropylene) Jar Height: 25 Cm To 28 Cm Jar Thickness: 4 Mm To 8 Mm Heat Resistant Glass Jar With Cover Source Voltage: 220 Volts / 240 Volts,50 Hz / 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug Adopter 10a/220v. Power Wattage: 300 To 700 Watts Blade: Stainless Steel, 3 To 4 Metal Blades 5,000.00 40,000.00 64 Pc Board, Chopping/cutting, Plastic. Type: Cutting Board Body Shape: Rectangular Material: Plastic (polypropylene), Food Grade Board Size: Length: 15 Inches (minimum) Width: 12 Inches (minimum) Thickness: 0.5 Inch (minimum) With Hole For Storage Purposes Preferably With Packing Case Food Grade And Dishwasher Safe 400.00 25,600.00 8 Pc Boiler, Double. Material: Stainless Steel Thickness: 1/16 Inch (1.5 Mm) (minimum) Lid Material: Glass Riveted Handle On Both Side Diameter: 9 1/2 Inches (minimum) Total Height: 9.4 Inches (minimum) Inset Bottom Diameter: 9 Inches (minimum) Inset Top Diameter: 9 Inches (minimum) Capacity: 2 Liters (minimum) 2,465.00 19,720.00 32 Pc Braising Pan, Medium. Body Shape: Round Material: Enameled Cast Iron And Stainless Steel Size: Diameter: 28 Cm X Height: 10 Cm (minimum) Capacity: 4 Liters (approximate) With Stainless Steel Cover, Solid Cast Stainless Steel Side Handles And Riveted Handle On Both Side: Length: 10 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 1,980.00 63,360.00 12 Pc Can Opener. Type: Can Opener Body Shape: Materials: Stainless Steel Dimension: Length-21 Cm X Width 10 Cm X Depth:2.5cm (minimum) Multi-use: 3 In 1 Can Opener Also Opens Bottle Tops- Can Lids And Tabs 300.00 3,600.00 24 Pc Casserole, Medium. Type: Casserole Pot Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick Dimension: Diameter- 24 Cm X Height -14 Cm (minimum) Tempered Glass Lid Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Preferably With Packing Case 1,320.00 31,680.00 48 Pc Casserole, Small. Type: Casserole Pot Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick Dimension: Diameter- 20 Cm X Height -12 Cm (minimum) Tempered Glass Lid Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 300.00 14,400.00 16 Pc Colander, Medium. Type: Colander, Medium Body Type: Round Material: 304 Stainless Steel Diameter: 30 Cm (minimum) Capacity: 8 Quarts (9 Liters) Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 To 10 Mm 1,225.00 19,600.00 16 Pc Colander, Small. Type: Colander (small) Body Shape: Round Material: 304 Stainless Steel Diameter: 26 Cm (minimum) Capacity: 5 Quarts (5.6 Liters) Welded Handle On Both Sides, Size: 7.5 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm Body Thickness: 0.8 Mm (minimum) Full-ring Support Base, 15 Cm Diameter Preferably With Packing Case. Food Grade And Dishwasher Safe 1,058.00 16,928.00 32 Set Cup, Measuring (for Solid) (set). Type: Measuring Cup Set Body Shape: Round Material: Stainless Steel, 0.7 Mm Thick (minimum) Each Set Contains The Following: 1 Pc - 1 Cup (237 Ml) 1 Pc - 1/2 Cup (118 Ml) 1 Pc - 1/3 Cup (79 Ml) 1 Pc - 1/4 Cup (59 Ml) Handle Dimension: Length-12 Cm X Width-1 Cm (minimum) Measuring Capacity Engraved On The Handle Strip Handles Have Provision For Hanging Preferably With Packing Case Smooth Surfaces And Dishwasher Safe 545.00 17,440.00 16 Pc Dispenser, Paper Towel. Body Shape: Rectangular Material: Abs Plastic Dimensions: Length =260 Mm X Width =100 Mm X Height = 211 Mm (minimum) Capacity: 200 Paper Paper Size: Length-20 Cm X Width- 8 Cm (approximate) Mounting Style: Wall Mounted Tissue Box 978.00 15,648.00 12 Pc Fan, Electric. Stand Fan, Electric Material: Metal, Plastic Size/diameter: 18 Inches Power Rating: 70 Watts (minimum), 220 / 240 Vac, 50 / 60 Hz, Single Phase, Rotation Angle: 90 Degrees Base: Stable, 16 Inches Diameter (approx.) Removable Metal Guard On Front And Rear 3-speed Settings, Comes With 1.5 Meters Power Cord And With Molded Male Plug To Adapt Type A Outlet (or Providing 3a Minimum Plug Adapter Is An Option) Smooth Surface, No Sharp Edges Includes User's Manual In English 2,655.00 31,860.00 8 Pc Fire Extinguisher (with Contents). 1.for Type A, B, C Fire: Dry Chemicals (monoammonium Phosphate) 2.portable Type 3.capacity : 5 - 6 Kgs 4.rechargeable Cylinder Metal 5.working Pressure Of Cylinder : 400 Psi 6.brass Valve With Pressure Gage 7.with Rubberized Hose And Aluminum Nozzle Attached 8.with Squeeze Lever To Discharge And Safety Pin 10.painted With Metal Primer And Red Enamel Paint 2,600.00 20,800.00 8 Pc Fish Poacher, Medium. Type: Fish Poacher Body Shape: Oval Pot For Poaching Material: Stainless Steel, 0.64 Mm Thick Dimensions (l X W X D): 45 Cm X 15 Cm X 12 Cm (minimum) Handle Material: Stainless Steel Riveted Looped Handles On Both Side, 7 Cm (minimum) Handle Diameter: 8 Mm To 10 Mm 2,500.00 20,000.00 16 Pc Fork, Carving. Body Shape: Square Shape Prong Prong Material: High Carbon Stainless Steel Overall Length: 30 Cm (minimum) Blade Dimension: Length- 15 Cm X Width- 0.5 Cm X Thickness- 0.3 Cm (minimum) Number Of Prongs: 2 Prong Comes With Square- Shaped Prongs And Pointed Tips Abs Plastic Triple-riveted Handle. Preferably With Packing Case 585.00 9,360.00 32 Pc Fork, Kitchen (pcs). Body Shape: Standard Material: Stainless Steel Dimension: Length - 32 Cm X Width- 3.5 Cm (minimum) Fork Size: Length: 8 Cm X Width -3.5 Cm (minimum) Handle: Abs Plastic Number Of Tines: 2 Tines With Tapered End 300.00 9,600.00 16 Pc Frying Pan, Large. Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-30 Cm (minimum) X Height- 5.5 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 20 Cm Long (minimum) Preferably With A Packing Case, Oven Safe Up To 250⁰f 878.00 14,048.00 32 Pc Frying Pan, Medium. Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-24 Cm (minimum) X Height- 4.5 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 19 Cm Long (minimum) Preferably With A Packing Case 735.00 23,520.00 48 Pc Frying Pan, Small. Body Shape: Round Pan Material: Aluminum With Non-stick Coating Thickness: 3 Mm Thick (minimum) Dimension: Diameter-20 Cm (minimum) X Height- 3.8 Cm (minimum) Handle Material: Stainless Steel With Silicone Riveted Handle: 12 Cm Long (minimum) Preferably With A Packing Case Oven Safe Up To 250⁰f 625.00 30,000.00 16 Pc Funnel, S/s, Medium. Type: Stainless Steel Funnel Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-15 Cm (minimum) X Height- 15.8 Cm (minimum) Tube Diameter: 2 Cm X Length: 7.3 Cm (minimum) Comes With Handle For Easy Hanging Preferably With Packing Case Dishwasher Safe 245.00 3,920.00 16 Pc Funnel, S/s, Small. Type: Stainless Steel Funnel Body Shape: Round Material: 304 Stainless Steel Dimension: Diameter-11 Cm (minimum) X Height- 10 Cm (minimum) Tube Diameter: 1.5 Cm X Length: 5 Cm (minimum) Comes With Handle For Easy Hanging Preferably With A Packing Case. Dishwasher Safe 185.00 2,960.00 16 Pc Garbage Bin. Type: Swivel Lid Garbage Bin Body Shape: Round Material: Hard Plastic, Polypropylene Dimension: Diameter-26 Cm X Height-47 Cm (minimum) Capacity: 4 Gallons (minimum) Removable Dome Shape Lid With Spring Return Swivel Preferably With A Packing Case Color: Any Color 685.00 10,960.00 48 Pc Glass Rack. Body Shape: Square Material: Polypropylene Plastic Overall Dimensions: Length - 19 1/2 Inches X Width - 19 1/2 Inches X Height - 4 Inches (minimum) Compartments: Full-size 25 Individual Compartment Glass Rack, Compartment Dimensions: Length - 3 1/2 Inches X Width - 3 1/2 Inches X Height - 4 Inches (minimum) Easy Grip Handles Molded Into All Four Sides Preferably With A Packing Case 2,980.00 143,040.00 8 Pc Ice Cream Scooper. Type: Ice Cream Scooper Body Shape: Round Material: Stainless Steel Scoop: Diameter- 5 Cm X Deep-2.5 Cm (minimum) Handle Length: 10 To 12 Cm 265.00 2,120.00 32 Pc Knife, Boning. Type: Flexible Boning Knife Body Shape: Ergonomic Material: High Carbon Steel Overall Length: 28 Cm (minimum) Blade: Length-15 Cm X Width- 3 Cm (minimum), Pointed Tip Cutting Edge Angle From Tip To The Heel Is 13 To 14 Degrees Handle Length: 12 Cm (minimum) Handle Material: Hard Plastic Handle With Rivets Preferably With Packing Case, Dishwasher Safe 462.00 14,784.00 40 Pc Knife, Chef. Type: Chef's Knife Body Shape: Flat Materials: Stainless Steel Overall Length: 30 Cm (minimum) Blade Size: Length - 20 Cm X Width-4 Cm (minimum) Blade Thickness: 2.5 Mm (minimum) 592.00 23,680.00 12 Pc Knife, Cleaver. Type: Cleaver Knife Body Shape: Flat Blade Material: Forged Stainless Steel Heavy Duty Blade Length: 17 Cm (minimum) Overall Length: 30 Cm (minimum Cutting Edge: Straight Handle Material: Ergonomic Wood Handle With Triple Rivets 1,495.00 17,940.00 16 Pc Knife, Oyster. Body Shape: Ergonomic Blade Material: Stainless Steel Blade Dimension: Length - 7 Cm (minimum) X Width - 2 Cm (minimum) Blade Thickness: 2 Mm (minimum) Handle Material: Smooth Wooded Handle Rounded Handle Size: Length-10 Cm X Diameter- 3.5 Cm (minimum) Total Length (from The Tip Of The Handle Up To Tip Of The Blade) :17 Cm (minimum) 335.00 5,360.00 8 Pc Light, Emergency. Emergency Light, 2 Heads Led Materials: Metal, Anti-rust Coated Duration Time (2 Heads): 5 Hours (minimum) Automatically Light Up During Power Outage Overcharge And Over- Discharge Protection Built - In Ac Charger, Power Cord Plug To Adapt Type A Outlet (or Providing 5a Minimum Plug Adapter Is An Option) Battery Test Switch - External Safety Fuse Head: White Led 1w (minimum) 3.5 " Dome Reflector 2,850.00 22,800.00 8 Pc Meat Slicer, Small. Body Shape: Circular Housing Material: Die Cast Aluminum Alloy And Body Painted Dimensions: Width-40.5 Cm X Depth- 45.7 Cm X Height- 38 Cm (minimum) Stainless Steel Rotary Blade Diameter: 190 Mm (minimum) Power Source: 220 Volts-230 Volts, 60 Hz With Power Cord 1.5 Meter Long With Attachment Of Standard Type A Male Plug Or Provide Plug, Adopter 10a/220v 15,242.00 121,936.00 32 Pc Pastry Tube. Body Shape: Tube In Different Shape Of Nozzles Material: Stainless Steel Set Contain: 24 Different Shapes Of Nozzles (minimum) Tube Height: 3.5 Cm To 5 Cm Tube Diameter: 2 Cm To 3.5 Cm Thickness: 0.5 Mm (minimum) Tube Tip: Assorted Designs (create Swirls, Rosettes, Flowers, Stars, Leaves And Other Designs 168.00 5,376.00 32 Pc Peeler, Y-type. Body Shape: Ergonomic, Material: Stainless Steel Overall Dimensions (l X W X H): 7 Inches X 2 1/4 Inches X 1 Inch (minimum) Blade Material: 304 Stainless Steel, 0.7 Mm Head Dimension: (l X W X H) 2 1/4 Inches X 2 1/4 Inches X 1 Inch (minimum) Handle Material: Stainless Steel Handle Length: 4 3/4 Inches X 1 Inch Diameter (minimum) 295.00 9,440.00 32 Pc Pepper And Salt Mill. Body Shape: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism, Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices Preferably With A Packing Case 500.00 16,000.00 32 Pc Piping Bag (packs). Body Shape: Triangular Material: Transparent Disposable Plastic For Dispensing Ingredients To Pastries Length: 9 Inches Minimum Width: 3 Inches (minimum) Volume: 500 Ml (approximate) 265.00 8,480.00 48 Pc Plate Rack. Type: Plate Rack Body Shape: Rectangular Material: 304 Stainless Steel Dimension: Length-475 Mm X Width- 290 Mm X Height- 380 Mm (minimum) 4,890.00 234,720.00 24 Pc Preparation Table With Sink. Type: Preparation Table With Sink & Shelves Body Shape: Rectangular Material: Stainless Steel, 1 Mm Thick (minimum) Dimensions: L-1200 Mm X W - 700 Mm X H - 850 Mm (minimum) Stainless Steel Table Top And Stainless Steel Under Shelf Fully Welded Construction Sink: Left Side Single Bowl Sink With Drainer 4 Inches & Faucet Provision Sink Dimension (l X W X D) 400 Mm X 500 Mmx 25 Mm (minimum) 20,000.00 480,000.00 8 Pc Pressure Cooker. Type: Pressure Cooker Body Shape: Round Material: Polished Aluminum Dimension: Diameter: 32 Cm X Height: 25 Cm (minimum) Capacity: 10 Quarts (11.3 Liters) Side Handles For Secure Carrying Equipped With Safety Opening Mechanism, Spring Safety Valve, Rubber Seal Ring 4,760.00 38,080.00 16 Pc Roasting Pan. Type: Roasting Pan Body Shape: Rectangular Material: Stainless Steel Dimension: Length: 40 Cm X Width-35 Cm X Height -7 1/2cm (minimum) Thickness: 1.5 Mm Thick (minimum) Welded Handles On Both Sides Removable Stainless Steel Wire Rack 1,400.00 22,400.00 32 Pc Scissors, Kitchen. Type: Kitchen Scissor Body Shape: Ergonomic Blade Material: Stainless Steel, 2 Mm Thick Handle Material Heavy Duty Acrylonitrile Butadiene Styrene (abs) Plastic Overall Length: 20 Cm (minimum ) Width: 7.5 Cm (minimum) 250.00 8,000.00 32 Pc Siever, Small. Type: Fine Mesh Siever Body Shape: Round Material: Stainless Steel Diameter: 20 Cm (minimum) Depth: 7 Cm (minimum) Twin Wire Handle: Length 20 Cm X 5 Mm Diameter (minimum) Fine Mesh: 0.7 Mm (1/32 Inch) (minimum) Preferably With A Packing Case 475.00 15,200.00 32 Pc Skimmer, Fine. Type: Medium Fine Mesh Skimmer Body Shape: Round Material: Stainless Steel, Polished Overall Length: 34 Cm (minimum) Skimmer Head: Diameter -10 Cm X Depth- 4 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle: Length- 12 Cm X Diameter- 2 Cm (minimum) Handle Has Hole For Hanging Preferably With A Packing Case 140.00 4,480.00 32 Pc Skimmer, Spider. Body Shape: Round Material: Stainless Steel, Polished Overall Length: 35 Cm (minimum) Skimmer Head Diameter: 15 Cm X Depth 4 Cm (minimum) Handle Length: 12 Cm X 2 Cm Diameter (minimum) Preferably With A Packing Case Dishwasher Safe 435.00 13,920.00 48 Pc Soup Cup Rack. Type: Soup Cup Rack Body Shape: Square Material: Polypropylene Plastic Dimension: Length: 50 Cm X Width: 50 Cm X Height: 10 Cm (minimum) Compartment Length: 11 Cm Compartment Width: 11 Cm Compartment /inside Height: 6.7 Cm No. Of Compartment: 16 Compartments 2,000.00 96,000.00 32 Pc Soup Ladle, 3oz. Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 28 Cm (minimum) Capacity: 3 Oz. (85 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case, Dishwasher Safe 250.00 8,000.00 32 Pc Soup Ladle, 6oz. Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 30 Cm (minimum) Capacity: 6 Oz. (170 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case. Dishwasher Safe. 290.00 9,280.00 16 Pc Soup Ladle, 8oz. Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 30 Cm (minimum) Capacity: 8 Oz. (236 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case 350.00 5,600.00 16 Pc Soup Ladle, 12oz. Body Shape: Round Material: Stainless Steel Thickness: 1 Mm Thick (minimum) Handle Length: 34 Cm (minimum) Capacity: 12 Oz. (341 Ml) Ladle Type: Round Bottom Hooked Handle Design Allows It To Easily Sit On The Edge Of Pots. Preferably With A Packing Case. Dishwasher Safe. 400.00 6,400.00 32 Pc Spatula. Type: Offset Spatula Body Shape: Flat Blade Material: Stainless Steel 316 Handle Material: Hardwood (smooth Finish) With Rivets Blade Dimension: Length= 7 .5 Inches X Width-1.5 Inches (minimum) Thickness Of Blade: 1.7 Mm Thick (minimum) Total Length = 12 To 14 Inches Preferably With A Packing Case Dishwasher Safe. Must Be Branded. 365.00 11,680.00 32 Pc Spoon, Kitchen. Type: Kitchen Spoon Body Shape: Oval Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type Preferably With A Packing Case Heat Resistant Up To 220 ° C Dishwasher Safe. Must Be Branded. 300.00 9,600.00 32 Pc Spoon, Kitchen (slotted). Type: Kitchen Spoon Slotted. Body Shape: Oval With Slot Material: Stainless Steel, 1.5 Mm Thick Overall Length: 30.5 Cm X Width-7.5 Cm (minimum) Spoon Head Dimension (l X W) 9 Cm X 7.5 Cm (minimum) Handle: Abs Plastic Spoon Head: Oval Type With Slot At Least 6 Rectangular Slots. Preferably With A Packing Case Heat Resistant Up To 220 ° C. Dishwasher Safe 425.00 13,600.00 32 Set Spoon, Measuring (set). Type: Measuring Spoon Body Shape: Bowl In Shape Material: Stainless Steel, 0.7 Mm Thick (minimum) The Set Consists Of The Following Sizes: 1 Pc - 1 Tbsp. (15 Ml) 1 Pc - 1/2 Tbsp. ( 7.5 Ml) 1 Pc - 1 Tsp. (5 Ml) 1 Pc - 1/2 Tsp. (2.5 Ml) 335.00 10,720.00 32 Pc Spoon, Parisienne. Type: Parisiennes Spoon Body Shape: Round Double Headed Parisiennes Scoop Bar Tool Material: Stainless Steel, Polished Overall Length: 240 Mm (minimum) Scoop Diameter: 30 Mm And 24mm (minimum) With Plastic Handle (polypropylene), Size: 130 Mm X Width-20 Mm (minimum) Draining Small Hole In The Scoop 345.00 11,040.00 96 Pc Spoon, Serving. Body Shape: Oval Materials: Stainless Steel Dimension: Length: 23 Cm X Width: 5 Cm (minimum) Scoop Dimension (l X W X D): 7 Cm X 5 Cm X 0.9 Cm (minimum) Spoon Thickness: 1.6 Mm (minimum) Preferably With A Packing Case Dishwasher Safe. Must Be Branded. 200.00 19,200.00 32 Pc Spoon, Wooden. Body Shape: Oval Material: Hardwood Dimensions: Length- 10 Inches X Width- 2 Inches (minimum) Bowl Dimension: Length -3 Inches X Width 2 Inches X Depth -3/4 Inches (minimum) Total Length: 10 Inches (minimum) Preferably With A Packing Case Smooth Surface Finished And No Sharp Edges 300.00 9,600.00 16 Pc Stock Pot, Large. Type: Stock Pot, Large Body Shape: Round Material: Stainless Steel, 0.8 Mm Thick (minimum) Top Diameter: 30 Cm (minimum) Height: 31 Cm (minimum) Capacity: 20 Quarts (22.7 Liters) Oven Safe To 350⁰f And Dishwasher Safe. With Aluminum Disc Layer In Bottom For Even Heat (5 Mm Aluminum 3,590.00 57,440.00 16 Pc Strainer, Chinois, Medium. Type: Strainer Chinois, Medium Body Shape: Conical Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 21.5 Cm (minimum) Handle Length: 20 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded 735.00 11,760.00 16 Pc Strainer, Chinois, Small. Strainer Chinois, Small Body Shape: Conical Material: Stainless Steel Strainer Diameter: 14 Cm (minimum) Strainer Depth: 13 Cm (minimum) Handle Length: 15 Cm (minimum) With 1 Mm (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded 675.00 10,800.00 32 Pc Strainer Medium, Fine. Type: Strainer, Medium Fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 20 Cm (minimum) Strainer Depth: 7 Cm (minimum) Handle Length: 18 Cm (minimum) With 2 Mm. (approx.) Fine Mesh Strainer’s Two Layers Of Tightly Woven Mesh Catches Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe Must Be Branded. 465.00 14,880.00 32 Pc Strainer Small, Fine. Type: Strainer, Small Fine Body Shape: Round Material: Stainless Steel Strainer Diameter: 13 Cm (minimum) Strainer Depth: 5 Cm (minimum) Handle Length: 13 Cm (minimum) With 1 Mm. (approx.) Fine Mesh Handle Has Provision For Hanging Preferably With A Packing Case Dishwasher Safe. Must Be Branded 325.00 10,400.00 20 Pc Table, Working. Type: Working Table, Stainless Steel. Body Shape: Rectangular Material: 304 Stainless Steel, 1.29 Mm Thick (gauge 16) Minimum Length: 1220 Mm (minimum) Width: 700 Mm (minimum) Height: 850 Mm (minimum) Tubular Stainless Steel Legs, 38mm (minimum) With 4 Adjustable Bullet Feet Fully Welded Construction Thickness: Gauge 16 (1.29 Mm Thick) Minimum Stainless Steel Table Top With Stainless Steel Undershelf Distance Between Table Top And Undershelf Is 650 Mm (minimum) Preferably With A Packing Case Or Crate No Sharp Edges And Rough Surfaces. Must Be Branded. 19,500.00 390,000.00 32 Pc Tenderizer, Medium. Type: Tenderizer Body Shape: Ergonomic Material: Cast Aluminum Overall Length: 26 Cm (minimum) Dual-sided Hammer, Square Head: 6 Cm X 6 Cm (minimum) Ridged Surface With Rows Of Dull, Pyramid-shaped Spikes, Weight: 250 Grams To 500 Grams Preferably With A Packing Case Dishwasher Safe. Must Be Branded 315.00 10,080.00 16 Pc Thermometer, Pocket/pin. Type: Pocket/pen Thermometer Body Shape: Tubular Pen Style Digital Thermometer Product Size: 100 Mm X 40 Mm X 14 Mm (minimum) Display Size: 40 Mm X 20 Mm (minimum) Prove Length: 200 Mm (minimum) Measuring Range: -50 °c To 300 °c (-58 ⁰f To 372 ⁰f) Resolution: 0.1 °c / 0.2 °f 600.00 9,600.00 32 Pc Tong, 12 Inches. Body Shape: Standard Material: Stainless Steel Size: 12 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe. Must Be Branded 320.00 10,240.00 40 Pc Tong, 8 Inches. Body Shape: Standard Material: Stainless Steel,size: 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case. Food Grade And Dishwasher-safe 250.00 10,000.00 32 Pc Tray, Baking, Small. Type: Baking Tray Body Shape: Rectangular Material: Stainless Steel Dimension: 20 Cm X 30 Cm X 3.7 Cm (minimum) Body Thickness: 0.7- 1.0 Mm Preferably With Packing Case Dishwasher Safe. Must Be Branded 556.00 17,792.00 48 Pc Tray, Utility. Type: Utility Tray Body Shape: Rectangular Material: Stainless Steel Dimension: Length- 48 Cm X Width-32 Cm X Height-2.5 Cm (minimum) Reinforced Edges Finish: Polished. Preferably With A Packing Case. Washable And Oven Safe 485.00 23,280.00 32 Pc Turner 3" X 6. Body Shape: Straight Material: Stainless Steel Blade Size (lx W): 6 Inches X 3 Inches (minimum) Handle Length: 5 Inches (minimum) Overall Length: 13 Inches (minimum) Solid Turner With Straight Slotted Blade Wooden Handle With Triple Rivets Preferably With A Packing Case Dishwasher Safe. Must Be Branded 398.00 12,736.00 8 Pc Utility Cart. Body Shape: Rectangular Material: Plastic, Polypropylene(pp) Dimension: (l X W X H) 84 Cm X 43 Cm X 95 Cm (minimum) Capacity: 330 Lbs (150 Kg) Loads (minimum) Three (3) Shelving With At Least 25 Cm Distance Between Shelves Tub Shelf Measure (l X W X D) 84 Cm X 43 Cm X 7 Cm (minimum) With Four (4) Swivel Caster, 10 Cm Diameter, Two Which Have Locking Brakes Preferably With A Packing Case Easy Grip Handles On Each End Of Cart 5,000.00 40,000.00 16 Pc Weighing Scale, 1 Kg Digital. Type: Digital Weighing Scale, Body Shape: Rectangular Materials: Engineering Plastic And Stainless Steel Weighing Plate, Capacity: 1 Kg, Accuracy: 1 Gram Back Light Lcd Display With 15 Mm Minimum High Digits, Weighing Units: Gram, Ounce, Pound Size: (l X W X H Mm ) 163 Mm X 245 Mm X 79 Mmm (minimum) 720.00 11,520.00 8 Pc Weighing Scale, 5 Kilograms, Mechanical. Type: Mechanical Weighing Scale Body Type: Circular Bowl Material: Stainless Steel Bowl And Metal Body (coated) Mechanism Type: Spring Lever Capacity: 5 Kg /11 Lb. Sensitivity/graduated By 10 Gm Measurement Units: Gram/kilogram Manual Setting On Zero, Must Be Accurate And Durable Calibrate The Scale Using The Adjustment Knob Preferably With A Packing Case Delivery Must Include Instruction Manual Written In Good English With Service Centers Located In The Major Cities In The Philippines Warranty Period Of 1 Year (parts And Service) Must Be Branded 1,540.00 12,320.00 32 Pc Wire Skimmer, Small. Type: Skimmer, Wire Mesh Body Shape: Round Material: Stainless Steel, Polished Overall Length: 40 Cm (minimum) Skimmer Head Diameter: 12 Cm (minimum) Diameter Of Holes: 2 Mm (approx.) Handle Has Hole For Hanging. Preferably With A Packing Case. Dishwashing Safe. Must Be Branded. 295.00 9,440.00 16 Pc Wire Whisk, Heavy Duty. Type: Wire Whisk, Heavy Duty. Body Shape: Ballon Material: Heavy Duty Stainless Steel Dimensions (l X W): 31.8 Cm X 7.6 Cm (minimum) Handle Length: 12 Cm (minimum) With Hanging Loop No. Of Wires: 8 Wires Wire Diameter: 2 Mm (minimum) Preferably With A Packing Case Dishwasher Safe. Must Be Branded. 335.00 5,360.00 32 Pc Wire Whisk, Medium. Type Wire Whisk, Medium Body Shape: Ballon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 25.4 Cm X 7 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe. Must Be Branded 425.00 13,600.00 32 Pc Wire Whisk, Small. Type: Wire Whisk, Small Body Shape: Balloon Material: Stainless Steel Wire Whisk Medium Dimensions (l X W): 20.3 Cm X 6 Cm (minimum) Handle Length: 10 Cm (minimum) With Hanging Loop No. Of Wires: 6 Wires Wire Diameter: 1.8 Mm (minimum) Preferably With A Packing Case Dishwasher Safe. Must Be Branded. 385.00 12,320.00 8 Pc Wok, Medium. Body Shape: Round Material: Carbon Steel Thickness: 1.8 Mm Thick (minimum) Dimensions (dia. X H): 45 Cm X 14 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 10 Cm (minimum) With Flat Bottom. Preferably With A Packing Case Dishwashing Safe. Must Be Branded 1,950.00 15,600.00 16 Pc Wok, Small Body Shape: Round Material: Carbon Steel Thickness: 1.5 Mm Thick (minimum) Dimensions (dia. X H): 36 Cm X 10 Cm (minimum) Handle Material: Steel Riveted Convenient Both Side Handle 8 Cm (minimum) With Flat Bottom. Preferably With A Packing Case Dishwashing Safe. Must Be Branded 1,650.00 26,400.00 32 Pc Zester. Body Shape: Standard Material: Stainless Steel Grating Surface Dimensions (l X W): 20.3 Cm X 4 Cm (minimum) Overall Length: 32.5 Cm (minimum) Handle Material: Plastic (polypropylene) Ergonomic Handle. Preferably With A Packing Case Dishwasher Safe. The Plastic Material Used Must Be Non-toxic. Must Be Branded. 390.00 12,480.00 768 Pc Chair, Dining. Type : Dining Side Chair Body Shape: Square Material : Metal (round Or Square) Dimension: Total Height - 33" X 15" X15" (minimum) Capacity: 150 Kg. Black Colored Powder Coated Frame With Foam On Seat Packed In Carton Box The Item Must Have Good Quality. 2,200.10 1,689,676.80 32 Pc Coffee Pot, 2 Pints. Type: Manual Drip Body Shape: Round Material : Stainless Steel With Cover Capacity : 2 Pints Outside Diameter : 90 -110 Mm Over-all Height : 200 - 230 Mm Thickness : 0.5 - 1 Mm With Handle And Spout Packed In Carton Box. The Item Must Have Good Quality 1,156.00 36,992.00 80 Pc Container, Creamer. Design: Type: Porcelain With Spout Body Shape: Circular Material: Porcelain Diameter: 50 - 65 Mm Height : 80 – 105 Mm Color: White Appearance : Glossy White Packed In Carton Box. The Item Must Have Good Quality 328.00 26,240.00 384 Pc Cups And Saucers 5-6 Oz. 1. Material: Porcelain 2. Capacity: 5 Oz./140 Ml 3. Heatproof Up To 300 Deg. C 4. Color: White 5. The Item Must Be Of Good Quality 6. Packed In Carton Box 285.00 109,440.00 384 Pc Fork, Cocktail. 1. Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design 2. Type : Rounded Tip Handle 3. Over-all Length : 110 - 165 Mm 4. Width : 20 - 30 Mm (minimum) 5. Handle Thickness : 2 Mm To 4 Mm 6. Handle Length : 75 - 90 Mm 7. Small, 8. Color : Silver 9. The Item Must Be Branded And Have Good Quality. 195.00 74,880.00 384 Pc Fork, Dessert. Type : Dessert Fork Body Shape: Fork Shape, Round Tip Material/appearance : Stainless Steel, Highly Polished, With Plain Design, Rounded Tip Handle Length : 150 Mm - 175 Mm Width : 20 - 30 Mm Handle Thickness : 1.5 Mm - 3 Mm Number Of Tines : 4 Handle : 130 Mm (minimum) Color : Silver Packed In Plastic Pouch The Item Must Be Of Good Quality 195.00 74,880.00 384 Pc Fork, Dinner. Type: Dinner Fork Body Shape: Fork Shape Material / Appearance : Stainless Steel, Highly Polished, With 4 Tines Over - All Length : 120 - 175 Mm Thickness Of Handle : 2 - 3 Mm Color : Silver, Packed In Plastic Pouch The Item Must Be Of Good Quality 185.00 71,040.00 384 Pc Fork, Fish. Type : Fish Fork Body Shape: Fork Shape With Round Tip Material / Appearance : Stainless Steel, Highly Polished, With Plain Design Over-all Length : 180 - 215 Mm Fork Width : 1.5 Mm - 3 Mm Fork Thickness : 1 Mm - 2 Mm Number Of Tines : 4 Length Handle : 120 - 130 Mm Handle Thickness : 2 Mm - 3 Mm Color : Silver. Packed In Plastic Pouch. The Item Must Be Of Good Quality 195.00 74,880.00 384 Pc Fork, Oyster. Type: Oyster Fork Body Shape: Fork Shape Material: Stainless Steel, With High Polish Appearance, And With Plain Design Length: 90 - 120 Mm Thickness: 1 Mm - 3 Mm Silver Color With Three Short Wide Curved Tines Packed In Plastic Pouch The Item Must Be Of Good Quality 225.00 86,400.00 384 Pc Glass, Champagne Flute. Type : Flute Glass Body Shape: Round Material: Clear Crystal Glass Dimension : Height: 20 -24 Cm, Top Diameter: 50 -70 Mm, Bottom Diameter: 60 - 80 Mm Capacity: 250 Ml. (minimum) Thickness: 1.5 - 3 Mm Packed In Carton Box The Item Must Have Good Quality 170.00 65,280.00 384 Pc Glass, Collins. Type: Tumbler Body Shape: Round Material : Clear Glass Capacity : 10 Oz To 14 Oz Thickness : 1.5 -3 Mm (minimum) Packed In Carton Box The Item Must Have Good Quality 102.00 39,168.00 384 Pc Glass, Juice/ Hi-ball. 1. Material : Clear Glass 2. Type : Hi-ball 3. Height : 140 - 160 Mm 4. Bottom Diameter : 50 -70 Mm 5. Top Diameter : 50 - 70 Mm 6. Thickness : 2 - 4 (minimum) 7. Capacity : 8 Oz. To 10 Oz. 8. Dishwasher Safe 9. The Item Must Be Branded And Good Quality 10. Packed In Carton Box 115.00 44,160.00 384 Pc Glass, Pilsner (ice Tea Glass). Type: Flaired Rim Body Shape: Round Slender Material: Clear Glass Capacity: 20 Oz. To 23 Oz. Over-all Length: 22 -25 Cm Thickness Of Glass : 1 -3 Mm With Flared Rim And Slender Shape Packed In Carton Box The Item Must Have Good Quality 120.00 46,080.00 384 Pc Glass, Red Wine. Type: Royalty Body Shape: Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter : 55 - 60 Mm Thickness : 1.5 Mm - 3 Mm Over - All Length : 200 -220 Mm Capacity : 250 -300 Ml Stem Diameter : 6 - 8 Mm Stem Length : 85 - 90 Mm Base Diameter : 75 - 85 Mm Base Thickness : 2 - 4 Mm 300.00 115,200.00 384 Pc Glass, White Whine. Type: Royalty Body Shape: Balloon Shaped Bowl Material: Crystal Clear Glass Rim Diameter : 55 - 60 Mm Thickness : 1.5 - 3 Mm Over -all Length : 200 -220 Mm Capacity : 270 - 300 Ml Stem Diameter : 6 - 8 Mm Stem Length : 75 - 85 Mm Base Diameter : 70 - 80 Mm Base Thickness : 2 - 5 Mm 300.00 115,200.00 96 Pc Gravy Boats. Type: Steel Type Body Shape: Boat Shape With Handle Material: Stainless Steel Capacity : 5 Oz. Appearance: Mirror Polish Finish Size :17cm X 7.3cm X 8.2 Cm / 6.7 X 2.9 X 3.2 Inches (minimum) The Item Must Have Good Quality Packed In Plastic Pouch 560.00 53,760.00 64 Pc Ice Bucket, 2 Liters With Tongs. Type: Steel Type, Body Shape: Circular Set Includes: A. Ice Bucket Material : Stainless Steel Diameter : 140 - 180 Mm Height : 140 - 170 Mm Thickness Of Bucket : 0.7 - 2 Mm Capacity : 2 Liters (minimum) The Item Must Have Good Quality 496.00 31,744.00 384 Pc Knife, Butter. 1. Material : Stainless Steel W/ Highly Polished Appearance 2. Over-all Length : 140 Mm - 150 Mm 3. Handle Thickness : 3 Mm - 5 Mm 4. With Dull Edge And Rounded Tip 5. The Item Must Have Good Quality. 6. Packed In Carton Box 180.00 69,120.00 384 Pc Knife, Dinner. Type: Dinner Knife Body Shape: Flat With Round Tip Material / Appearance : Stainless Steel Blade Highly Polished Handle Material : Stainless Steel Overall Length : 160 - 190 Mm Blade Thickness : 2 - 4 Mm Handle Thickness : 3 - 6 Mm Serrated Blade With Rounded Tip Packed In Carton Box The Item Must Have Good Quality 180.00 69,120.00 384 Pc Knife, Fish. Type : Fish Knife Body Shape: Flat With Pointed Tip Material / Appearance : Stainless Steel, Highly Polished W/ Plain Design Overall Length : 200 - 220 Mm Width Blade : 20 - 25 Mm Thickness Of Blade : 2 Mm - 4 Mm Thickness Of Handle: 3 Mm - 6 Mm Wide Blade, Dull Edge, Tip Made With A Notched Point Color : Silver, Packed In Carton Box The Item Must Have Good Quality 180.00 69,120.00 64 Pc Folder, Menu. Type: Leather Menu Folder Body Shape: Rectangular Material: Leather With 2 Partitions And 6 Inserts Size: 31.5cm X 24.5cm Color: Brown/black Applicable Paper Size: A4 234.00 14,976.00 96 Pc Napkin Holder. Type: Steel Type Body Shape: Rectangular Material : Stainless Steel With Highly Polished Appearance Dimension : Width : 70 - 90 Mm X Length : 150 - 170 Mm , Thickness : 0.7 Mm -2 Mm Packed In Plastic Pouch The Item Must Have Good Quality 350.00 33,600.00 64 Pc Order Pads. Type: Numbered Pads Body Shape: Rectangular Material : 80 Gsm Offset Paper Each Pad Comes With A 100 Sheets And Corresponding Copy Page Each Pad Has Sequentially Numbered Orders To Make It Easy To Keep Track With 100 Sheets Per Pad And 10 Pads Included Can Take 1000 Orders Before You Run Out Packed In A Plastic Pouch 85.00 5,440.00 64 Pc Pepper And Salt Mill. Type: Pepper & Salt Mill Body Shape: Round Body Material: Wood Size: Diameter: 5 Cm X Height: 20 Cm (minimum) Carved Of Wood With Stainless Steel Grinding Mechanism Color: Natural Screw Cap At The Top Of The Mill To Adjust The Thickness Of Peeper Or Spices Preferably With A Packing Case Food Grade And Nontoxic. Must Be Branded 500.00 32,000.00 128 Pc Plate Covers. Type: Steel Type Body Shape: Circular Material: Stainless Steel, Mirror Polished Diameter: 10 1/4 Inches (minimum) Height: 2 7/8 Inches (minimum) Thickness: 1/16 Inch. (minimum) With Handle, Packed In Plastic Pouch The Item Must Have Good Quality 600.00 76,800.00 384 Pc Plate, Dessert, 7" To 8" . Type: Plain Type Body Shape: Circular Material: Porcelain Supply Must Be A Set, Consisting Of One (1) Of Each: 7 Inches And 8 Inches Plates Color : White Inner Diameter: 145 To 165 Mm Thickness : 3 To 6 Mm Smooth And Glossy Surfaces Packed In Carton Box, The Item Must Have Good Quality 225.00 86,400.00 384 Pc Plate, Dinner, 10". Type: Plain Type Body Shape: Circular Material: Porcelain With No Design Color: White Inner Diameter : 200 Mm - 215 Mm Outer Diameter : 250 - 260 Mm Thickness : 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 265.00 101,760.00 384 Pc Plate, Fish, 8" To 9" . Type: Plain Type, Body Shape: Circular, Material : Porcelain With No Design Supply Shall Be A Set Consisting Of: One (1) Each 8 Inches And One (1) Each, 9 Inches Color : White, Inner Diameter : 165 Mm - 190 Mm (minimum) Thickness : 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box The Item Must Have Good Quality 225.00 86,400.00 128 Pc Table, Round (8's). Type: Foldable Body Shape: Round Material: High Density Polyethylene Table Top Powder Coated Steel Frame Size: 154cm X 74cm X4.5cm (minimum) Good For 8 To 10 Seater Capacity Tube Size : 28 Mm Diameter X 1 Mm Thickness Packed In A Carton Box. The Item Must Have Good Quality 6,500.00 832,000.00 384 Pc Fork, Salad. Type: Salad Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, With 4tines, Length: 150 Mm - 175 Mm Thickness Of Handle : 2 Mm - 3 Mm Color: Silver Packed In Plastic Pouch Item Must Be Of Good Quality. 125.00 48,000.00 384 Pc Knife, Salad. Type: Salad Knife Body Shape: Semi Rectangular Blade With Pointed Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Overall Length: 145 -160 Mm Blade Thickness: 2 Mm To 4 Mm Handle Thickness: 4 Mm To 6 Mm Handle Material: Stainless Steel Rounded Tip Handle Packed In Carton Box The Item Must Have Good Quality 125.00 48,000.00 384 Pc Salad Plates 7" To 8" . Type: Plain Type Body Shape: Circular Material: Porcelain With No Design Supply Must Be A Set Consisting Of One (1) Each: 7 Inches And 8 Inches Plates Color: White Diameter (inner): 150 Mm - 165 Mm Thickness: 3 Mm - 6 Mm Smooth And Glossy Surfaces Packed In Carton Box. The Item Must Have Good Quality 215.00 82,560.00 64 Pc Salt And Pepper Shakers. Type: Glass Type Body Shape: Square Material: Glass And Aluminum Over-all Height: 75 -90 Mm Length: 50 -60 Mm, Width: 50 -60 Mm Aluminum Cover. Packed In Carton Box The Item Must Have Good Quality 550.00 35,200.00 64 Pc Sauce Ladles. Type: Spouted Bowl Body Shape: Circular With Pouring Spout Material: Stainless Steel, Highly Polished Appearance Over-all Length: 220 -230 Mm Ladle Bowl Length: 60 -65 Mm Long Ladle Bowl Diameter: 65 -70 Mm Depth: 10 -15 Mm Handle Details: 150-155 Mm Long X 20 -30 Mm Wide X 2 - 4 Mm Thick, Color: Silver With Hang Hole For Hanging And Easy Access Dishwasher Safe. Packed In Plastic Pouch The Item Must Have Good Quality 395.00 25,280.00 64 Pc Server, Cake. 1. Material : Stainless Steel Blade , Highly Polished Appearance 2. Over-all Length : 220 To 270 Mm 3. Width : 60 - 80 Mm 4. Thickness : 1.5 Mm To 2 Mm 5. Handle : 120 -140 Mm Long, Non-toxic Plastic 6. Shape : Shovel-shaped 7. Color : Silver 8. The Item Must Have Good Quality 9. Packed In Carton Box 367.00 23,488.00 192 Pc Service Forks. Type : Service Fork Body Shape: Fork Shape Material/appearance: Stainless Steel, Highly Polished, W/ Palin Design Over-all Length: 220 Mm - 260 Mm Width: 20 - 25 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm 4 Tines, Color: Silver. Packed In Plastic Pouch 125.00 24,000.00 192 Pc Service Tray. Type: Plastic Body Shape: Rectangular Material: Plastic (pp) Size : 14 Inches X 18 Inches X 1 Inch (minimum) Color : Any, Packed In Plastic Pouch The Item Must Have Good Quality 628.00 120,576.00 192 Pc Show/service/base Plates 11" To 14" . Type: Plain Type Body Shape: Round Material: Porcelain With No Design Supply Must Be A Set Consisting (1) Of Each: - 11 Inches, - 12 Inches, - 13 Inches, And - 14 Inches Plates Color: White. Diameter, Inner : 225 Mm - 250 Mm Thickness: 3mm - 6 Mm. Smooth And Glossy Surfaces 574.00 110,208.00 384 Pc Side Plates Or Bread Plates 6" .type: Plain Type Body Shape: Round Material: Porcelain With No Design Color: White Inner Diameter: 95 Mm To 120 Mm Outer Diameter: 145 Mm To 170 Mm Thickness : 3 Mm - 6mm Smooth And Glossy Surfaces Packed In Carton Box. The Item Must Have Good Quality 135.00 51,840.00 192 Pc Side Towels. Type: Chef's Towel Body Shape: Rectangular Material: Oxford Polyester Soft Cloth Over-all Length : 640 - 680 Mm Over-all Width : 420 -460 Mm Color : Plain White Packed In Plastic Pouch. The Item Must Have Good Quality 280.00 53,760.00 192 Pc Silver Platter. Type: Steel Type Body Shape: Round Material: Stainless Steel Diameter: 300 -330 Mm Thickness: 1 - 2 Mm Packed In Plastic Pouch The Item Must Have Good Quality 578.00 110,976.00 96 Pc Soup Ladle. Type: Steel Type Body Shape: Circular Material: Stainless Steel, Highly Polished Appearance Over-all Length : 220 -235 Mm Ladle Bowl Details : 60 -65 Mm Long, 60 -75 Mm Diameter, 10 -15 Mm Deep Handle Details : 145 - 155 Mm Long X 12 - 25 Mm Wide X 1.5 -3 Mm Thick Color : Silver With Hang Hole For Hanging And Easy Access 355.00 34,080.00 384 Pc Soup Bowl. Type: Plain With Two Handles Body Shape: Circular Material : Porcelain Capacity : 24 Oz. (minimum) Packed In Carton Box The Item Must Have Good Quality Packed In A Carton Box 165.00 63,360.00 96 Pc Soup Tureen . Type: Steel Body Shape: Round Material: Stainless Steel Capacity: 7 - 11 Quart Size : 60 X 35 X 32 Cm (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 2,955.00 283,680.00 384 Pc Spoon, Dessert. Type : Dessert Spoon Body Shape: Oval Material/appearance: Stainless Steel, Highly Polished With Plain Design Over-all Length : 175 To 190 Mm Thickness : 2 Mm - 3 Mm Shorter Handle : 120 -130 Mm Color : Silver. Packed In Plastic Pouch The Item Must Have Good Quality 85.00 32,640.00 192 Pc Spoons, Service. Type : Service Spoon Body Shape: Oval Material: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 220 Mm - 250 Mm Width: 30 - 38 Mm Handle Thickness: 1.5 Mm - 4 Mm Handle Length - 165 Mm - 185 Mm Color: Silver. Packed In Plastic Pouch The Item Must Have Good Quality 78.00 14,976.00 384 Pc Spoons, Soup (cream And Consume). Type: Soup Spoon Body Shape: Round Material/appearance : Stainless Steel, Highly Polished, W/ Plain Design, Rounded Tip Handle Over-all Length : 165 Mm - 200 Mm Smaller Oval Shaped Spoon Bowl And Tapers Slightly To The Tip Shorter Handle : 110 Mm - 170 Mm Thickness : 1.5 Mm - 3 Mm Color : Silver. Packed In Plastic Pouch 65.00 24,960.00 384 Pc Knife, Steak. Type: Steak Knife Body Shape: Flat With Serrated Edge Material: Stainless Steel Blade With Wooden Handle Length: 170 Mm To 203 Mm Handle Wood Thickness: 10 - 14 Mm With Serrated Blade Packed In Carton Box The Item Must Have Good Quality 269.00 103,296.00 80 Pc Sugar Container. Type: Glass Type Body Shape: Round Material: Glass With Brass Lid (or Equivalent) Diameter: 70 -80 Mm Height: 130 -140 Mm Capacity: 12 Oz. Packed In Carton Box The Item Must Have Good Quality 250.00 20,000.00 128 Pc Table Cloth, 54 X 54 Inches. Type: Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Color: Plain White Dimension: L 54 Inches X W 54 Inches (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 1,729.00 221,312.00 640 Pc Table Napkins, Cloth, 16 X 16. Type: Plain Cloth Body Shape: Square Material: Oxford Polyester Cloth Or Its Equivalent Size: L 16 Inches X W 16 Inches (minimum) Color: Plain White Packed In Plastic Pouch The Item Must Have Good Quality 225.00 144,000.00 128 Pc Table Skirting Cloth 90" X 90" . Type: Plain Cloth Body Shape: Square Material: American Cotton Twill Cloth Color: Any Color Except Black Dimension: 90 Inches X 90 Inches (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 2,256.00 288,768.00 96 Pc Table, Square/rectangular (6's). Type: Foldable Plastic Body Shape: Square/rectangle Materia: High Density Polyethylene Table Top Powder Coated Steel Frame Dimension: 37 - 39 X 37 - 39 Inches Color: White Good For 6 Persons Packed In Carton Box The Item Must Have Good Quality 9,000.00 864,000.00 32 Pc Tea Pot, 2 Pints. Type: Porcelain Type Body Shape: Round With Handle And Pouring Spout Material : Porcelain Capacity : (2 Pint) Color : White Packed In Carton Box The Item Must Be Of Good Quality 1,040.00 33,280.00 384 Pc Teaspoon. Type : Tea Spoon Body Shape: Oval Tip Material/appearance: Stainless Steel, Highly Polished, W/ Plain Design Over-all Length: 120 Mm To 140 Mm Handle Thickness: 2 Mm To 4 Mm Short Handle Length - 100 Mm (minimum) Color: Silver Packed In Plastic Pouch The Item Must Have Good Quality 85.00 32,640.00 32 Pc Tong, 8 Inches. Type: Tong, 8 Inches Body Shape: Standard Material: Stainless Steel Size: 8 Inches Stainless-steel Arms With Soft, Comfortable Grips Nylon Heads Safe For Nonstick Cookware Heat-resistant Up To 400 Degrees Fahrenheit Tongs Lock Closed For Storage Preferably With A Packing Case Food Grade And Dishwasher-safe. Must Be Branded 324.00 10,368.00 64 Pc Tooth Pick Holder. Type: Steel Type Body Shape: Round Material: Stainless Steel, Highly Polished In Appearance Diameter: 30 -35 Mm Diameter (minimum) Height: 65 -75 Mm Capacity: 1.24 Oz. (minimum) Packed In Plastic Pouch The Item Must Have Good Quality 265.00 16,960.00 64 Pc Tray Stand. Type: Foldable Body Shape: Rectangular Material: Chrome Plated Metal Folding Tray Stand Length: 470 -490 Mm Width: 400 -440 Mm Height: 770 -790 Mm Packed In Plastic Pouch The Item Must Have Good Quality 3,850.00 246,400.00 64 Pc Tray, Bill Folders/change. 1. Material : Heavy Duty Plastic ( Abs ) Or Its Equivalent 2. Height : 190 - 220 Mm 3. Width : 120 -140 Mm 4. Thickness : 2 Mm To 3 Mm (minimum) 5. Color : Black 6. With Check And Pen Holder 7. The Item Must Have Good Quality 8. Packed In Plastic Pouch 356.00 22,784.00 128 Pc Tray, Round (bar). Type: Plastic Body Shape: Round Material: ( Pe/abs) Plastic Rubberized Surface, Non-slip/grip Tight Over-all Diameter: 345 -360 Mm (minimum) Thickness: 2 - 4 Mm (minimum) Color: Black Packed In Plastic Pouch The Item Must Have Good Quality 426.00 54,528.00 384 Pc Water Goblet. Type: Water Goblet Body Shape: Balloon-shaped Bowl Material: Crystal Clear Glass Over-all Length: 200 -220 Mm Capacity: 270 Ml To 300 Ml Rim Diameter - 55 -65 Mm Thickness: 1 Mm To 3 Mm Stem Length : 75 -85 Mm Stem Diameter : 6 -8 Mm Base Thickness : 3 -4 Mm Base Diameter : 7 -80 Mm Packed In Carton Box 145.00 55,680.00 96 Pc Water Pitcher. Type: Steel Type Body Shape: Circular Material: Stainless Steel, Highly Polished Appearance Height: 170 Mm To 220 Mm Top Diameter: 110 -120 Mm (approximate) Capacity: 1 - 1.5 Liter With Pour Spout Dishwasher Safe Packed In Plastic Pouch The Item Must Have Good Quality 485.00 46,560.00 80 Pc Table, Working. Type: Working Table, Stainless Steel Body Shape: Rectangular Material: 304 Stainless Steel, 1.29 Mm Thick (gauge 16) Minimum Length: 1220 Mm (minimum) Width: 700 Mm (minimum) Height: 850 Mm (minimum) Tubular Stainless Steel Legs, 38mm (minimum) With 4 Adjustable Bullet Feet Fully Welded Construction Thickness: Gauge 16 (1.29 Mm Thick) Minimum Stainless Steel Table Top With Stainless Steel Undershelf Distance Between Table Top And Undershelf Is 650 Mm (minimum) Preferably With A Packing Case Or Crate No Sharp Edges And Rough Surfaces Must Be Branded 19,500.04 1,560,003.20 36 Pc Body Brush, Prosthetic. Material: Stiff Nylon Bristle Size: At Least 41.8 Cm X 6.5 Cm (over-all Size) Brush Height: 8mm(minimum) With Wooden Handle" 480.00 17,280.00 36 Pc Bowl, Mixing, Plastic. Material: Plastic Inner Diameter: 10.5 Cm (minimum) Height: 6cm (minimum) Thickness Is 2mm (minimum) Any Color Non-toxic 250.00 9,000.00 18 Pc Bowl, Shampoo. Bowl Material: Abs Plastic With Adjustable Stand(height: 39 Inches To 54 Inches ) Minimum Bowl Dimensions: 19 Inches(l) X 20 Inches(w) X 10 Inches(h); With Sealed Foam Rubber Neck Rest For Shampoo Bowls With Hose Attachment Of 7 Ft. Long(minimum) Stainless Steel Frame. Portable Type. Packed With Shipping Carton Box. Branded 4,000.00 72,000.00 36 Box Box, Hairpin. Material: Metal Size: At Least 3.5 X 4.5 X 0.5 Inches With Ball Tips Packaging: 100 Pcs Per Box Color: Black Non-corrosive 200.00 7,200.00 36 Pc Brush, Applicator. Material: Plastic Non-toxic Size: Small=190mm Length Medium=270mm Large=300mm Handle Width:70mm (minimum) Width Of Tip: 80mm (minimum) With Hair Coloring Dyeing Board Packed With Plastic Pouch 250.00 9,000.00 36 Pc Brush, Hair. Material: Plastic Bristle Paddle Brush Type Wooden Handle Minimum Width: 2 Inches Non-toxic Packed With Protective Carton Box 250.00 9,000.00 36 Pc Cap, Frosting, With Hook. Cap Material: Silicone Type: Reusable, Perforated Cap One Size Fits All Or At Least 31cm X 22cm With Pre-cut Tipping Guides With Bleed Proof Inner Liner With A Rounded Metal Hook To Pull Hair Through The Ready-made Perforations Packed With Plastic Pouch 350.00 12,600.00 36 Pc Cap, Heating. Waterproof Cloth Material. Cordless Type To Fit An Average Size Head (21-24 Inches) Stretch Up To 29 Inches Unisex Hair Care Treatment Styling Reversible And Reusable, Non-toxic Includes With User's Guide In English That Contains: A. Diagram Of The Parts With Their Names B. Operating Procedure On How To Use The Equipment C. Safety Precaution When Using The Equipment D. Basic Troubleshooting And Maintenance Procedure 400.00 14,400.00 36 Pc Cape. Polyester Cloth Size: At Least 125 Cm X 140 Cm Hairstyling Type Non-toxic Packed With Plastic Pouch 220.00 7,920.00 36 Pc Chair, High. Bar Stool Material: Metal, Painted With Anti-rust Width Of The Chair :15 Inches Minimum Height :33 Inches (minimum) Synthetic Leather Seat Material Barstool Crown Back Type With Rubber Ring Of Barstool For Anti-skidding 6,000.00 216,000.00 36 Pc Chair, Hydraulic. Material: Metal Base Size: Length59 Cm, Width54 Cm, Height From 51-78cm Hydraulic Pump Can Be Up And Down By Pedaling Load Capacity:180kg Hydraulic Styling Chair Type Heavy Duty Hydraulic Pump For Height Adjustable And 360' Rotation Hydraulic Pump Build In For Adjusting The Seating Height. With Footrest 8,000.00 288,000.00 36 Pc Clamp. Material: Plastic Overall Length: 9.5cm Thickness:10mm(minimum) Hairstyling Clamp Type 200.00 7,200.00 36 Box Clamp, Duck Bill. Material: Metal Length: 11 Cm (minimum) High Elasticity Stainless Steel Spring. Nonslip Handle Packed With Plastic Pouch Branded 200.00 7,200.00 18 Box Clipper, Hair. Body Material: Hard Plastic Blade Material: Carbon Steel Capacity:6 Watts (minimum) Complete With Blade Guard And 4 Comb Attachments (#1, #2, #3, #4) Motor: Magnetic Type, Corded,12v Ac/dc Adaptor Delivers 1,400 Strokes Per Minute, With Complete Accessories Including The Cleaning Brush With Cord 2 Meters Length Minimum With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C. Operating Procedures, Packed With Protective Carton Box. Branded 2,500.00 45,000.00 36 Pc Comb, Afro. Material: Plastic Size: Overall Length At Least 7 Inches Width: 3.25 Inches(minimum) Number Of Teeth: 12 Teeth (minimum); Teeth Height: 2.5 Inches Long (minimum) 200.00 7,200.00 36 Pc Comb, All Purpose. Material: Plastic Size#3 Or At Least 18 Cm Long (minimum) Has Both Fine And Medium Teeth Position On One Side Only Height Of The Teeth: 2 Cm (minimum) Non-toxic. Packed With Plastic Pouch 200.00 7,200.00 36 Pc Comb, Haircutting. Material: Hard Plastic Length Including The Handle:180mm (minimum) Width: 30mm (minimum) With Detachable Steel Blades And Blade Holder With Two Sides For Different Cuts With Extra Blades 200.00 7,200.00 36 Pc Comb, Large Toothed. Material: Plastic Size: At Least 15 Cm Number Of Teeth: 10 Teeth (minimum) Gap Between Comb's Teeth: 0.4 To 0.5 Cm Gap From One Another Teeth Size: At Least 0.3 Cm In Width X 4cm In Length Non-toxic. Packed With Plastic Pouch 200.00 7,200.00 36 Pc Comb, Tail. Material: Plastic Size : 8 Inches(l)minimum X 1 Inches (w) Minimum Tail Length: 4 Inches(minimum) Tooth Length: 3/4 Inch(minimum) Packed With Plastic Pouch 200.00 7,200.00 36 Pc Comb, Teasing. Material: Plastic With 2 Rows Of Teeth. 1st Row: Large Teeth With At Least 25 Mm Long 2nd Row: Small Teeth With At Least 19 Mm Long Over-all Comb Size: 20 Cm (l) Minimum X 3.8 Cm (w) Minimum. Non-toxic. Packed With Plastic Pouch 200.00 7,200.00 36 Pc Comb, Wide Tooth. Material: Plastic Size: At Least 15 Cm Number Of Teeth: 10 Teeth (minimum) Gap Between Comb's Teeth: 0.4 To 0.5 Cm Gap From One Another Teeth Size: At Least 0.3 Cm In Width X 4cm In Length 200.00 7,200.00 18 Box Crimpers. Power: 25 Watts(minimum) Size: At Least 38 Cm X 15.5 Cm X 9 Cm Maximum Temperature: 200 Degrees Centigrade With Variable Heat Setting. With On/off Switch Button Rated Voltage: 110 -230volts Ac With Power Cord With Plastic Handle 2,000.00 36,000.00 36 Pc Curling Iron. Ceramic Curling Iron Capacity: 65watts Voltage: 210-240volts Ac With Power Cord Barrel Size: 1 Inch (minimum) Adjustable Heat Setting With Maximum Temperature Of 200 Degrees, Centigrade Swivel Cord Up To 360 Degree 3,000.00 108,000.00 36 Pc Drip Pan. Material: Hard Plastic Size: At Least 17.5 X 25.8 X 1 Inches Thickness: 1/8 Inch (minimum) Shallow Rectangular Type Packed With Carton Box 220.00 7,920.00 36 Pc Dryer, Hair. Power: 1000w Rated Voltage: 220vac At Least (l X W X H): 18.5cm X 16cm X 6.5cm With Plastic Handle Design Packed With Carton Box With Styrofoam Holder With User's Manual In English 3,000.00 108,000.00 36 Box Gloves, Disposable. Material: Plastic Size: At Least 25cm X 23cm Packaging Is 100 Pcs Per Box 250.00 9,000.00 36 Box Gloves, Rubber. Size: Medium Thickness: 4 Mil Acid Resistant Packed With Plastic Pouch In Pairs. 250.00 9,000.00 36 Pc Gown, Smock. Material: Polyester Sizes: 1 Piece = Small Size, At Least (50 Inches X 56 Inches); 1 Piece= Medium Size, At Least (52 Inches X 58 Inches); 1 Piece= Large Size, At Least (54 Inches X 60 Inches); Packed With Plastic Pouch Per Size 250.00 9,000.00 36 Box Hairclips. Material: Metal Size: At Least 67mm X 19mm Non-corrosive Packed With Plastic Pouch 180.00 6,480.00 36 Pc Hairnet, Invisible. Material: Nylon Size: 55mm (minimum) Stretchable And Unisex Type Color: Black Non-toxic Packed With Plastic Pouch 180.00 6,480.00 36 Pc Headband. Size: 6 Inches (minimum) Woven Crochet Tube Top Headband Very Stretchy, Soft Material, Comfortable And Breathable 180.00 6,480.00 36 Pc Headband, Flannel. Flannel Cloth Size : At Least 45 Cm (unstretched Circumference) Width: 8 Cm (minimum) 180.00 6,480.00 36 Pc Infrared Iron. Material: Ionic Ceramic Tourmaline-infused Plates And Abs Plastic Body Power: 70 Watts (minimum) Power Rating: 220-240 Volts Ac; Over-all Size: 24 Cm Long (minimum) Heating Plate Size Up To 50 Mm Heating Time: Within 30 Seconds; Variable Heat Settings: From 250 To 450 Degrees Fahrenheit With Digital Temperature Control Safety Mode: Auto Shut Off After 60 Minutes; With Swivel Cord Comes With Storage Pouch. Branded 1,900.00 68,400.00 60 Pc Mirror, Hand. Mirror Size 15 Cm Diameter (minimum) Frame Thickness Including Mirror Glass: 6.5mm(minimum) Over-all Length With The Handle Is 20 Cm (minimum) Clear Mirror With No Distortion Frame And Handle Are Made Of Plastic Plane Mirror Type Packed With Carton Box With Styrofoam Protection 505.00 30,300.00 36 Pc Mirror, Modular. Mirror Type: Plain Mirror Mirror Material: Glass Frame Material: Aluminum (cut To Fit) Dimensions (hxw): 75 Cm X 65 Cm (minimum) Mirror Thickness: 6mm (minimum) 2,300.00 82,800.00 36 Pc Prong Clip, Double. Material: Steel Nickel Or Chrome Base Plated Size: 45 Mm Minimum Hairstyling Clip Type Packed With Plastic Handle 220.00 7,920.00 36 Pc Prong Clip, Single. Material: Steel, Plated Size: 55 Mm (minimum) Type: Single-prong Clip Packed With Plastic Pouch 220.00 7,920.00 36 Pc Razor, Straight. Blade Material: High Carbon Steel Type: Foldable Straight Razor, Replaceable Blade; Dimensions (lxw): 14 Cm X 2 Cm (minimum) When Folded; Compatible With Double-edged Razor Blades; Package Includes 10 Pieces Blade/box Non-corrosive. Branded 300.00 10,800.00 36 Pc Roller Pins. Material: Metal Size: 60mm Long (minimum) Application: Hair Roller Pins Quantity By Dozen(12 Pieces) Non Corrosive. Packed With Plastic Pouch 200.00 7,200.00 36 Pc Rollers, Jumbo. Material: Plastic Approximately 44mm In Diameter X 64mm Long 300.00 10,800.00 36 Pc Rollers, Large Sized. Material: Plastic Size: At Least 40mm Diameter X 60mm Long Hairstyling Type. Packed With Plastic Pouch 250.00 9,000.00 36 Pc Rollers, Medium Sized. Material: Plastic; Diameter: 38 Mm(minimum) Length: 58mm (minimum) Hairstyling Type. Packed With Plastic Pouch 200.00 7,200.00 36 Pc Scissors, Cutting. Material:stainless Steel Total Length: 17cm (minimum) Blade Width At Least 10 Cm. Non Corrosive Packed With Plastic Pouch. Branded 500.00 18,000.00 36 Pc Scissors, Thinning. Blade Material: High Carbon Steel Blade Length At Least 6cm With Straight Blade Type Style: Right Handed Scissor Total Length At Least 17cm One Side Comb Cutter, Non Corrosive Packed With Plastic Pouch. Branded 500.00 18,000.00 36 Pc Scoop. Material: Plastic Capacity:1/2 Cup (minimum) Rounded Edges With Handle Thickness: 1.5 Mm (minimum) 350.00 12,600.00 36 Pc Shower Cap. Material: Plastic Size: One Size Fits All Or 30cm Reusable And Waterproof Packed With Plastic Pouch 220.00 7,920.00 36 Pc Spatula. Material: Plastic Dimension: Over-all Length Of 7.5 Cm Long, X 1.5 Cm Wide (minimum) Application: Hair Waxing Removal Packed With Plastic Pouch 200.00 7,200.00 36 Pc Spray Gun. Material: Transparent Plastic Capacity: 300ml (minimum) Trigger Type Sprayer Dimension: At Least Diameter Of Bottom Is 7 Cm And The Height Is 17cm 220.00 7,920.00 36 Pc Steamer, Hair. Power 450 Watts (minimum) Rating Is 220 Volts/50-60hz Hood Material: Polycarbonate Hood Has At Least 30 Cm Diameter Opening X 25 Cm Deep Timer Setting Is Up To 60 Minutes With At Least 32 Ounce Water Reservoir Adjustable Height From 100 To 150cm With At Least 5 Swivel Caster With User's Manual In English Which Includes: A. Parts Manual With Labels, B. Assembly Instructions, C. Operating Procedures. Branded 6,500.00 234,000.00 36 Pc Stool. Material: Metal, Electroplated Load Capacity: 150kg Design: Swivel Stool With Backrest With Hydraulic Lift To Adjust Height Freely. With Thick Sponge Cushion. With At Least Four Caster Wheels. With Thick Sponge Cushion. Swivel Stool With Backrest No Sharp Edges. Branded 8,500.00 306,000.00 21 Pc Dummy, Anatomical. 1. Half Life-size Muscular Figure Measures 32" Tall (minimum). 2. This Model Features 27 Removable Parts That Are Held On By Metal Screws, Posts, And Hooks. 3. It Shows The Muscular System With Numbered Parts That Comes With A Corresponding Key. 4. It Has Removable Arms, A Removable Calvarium, And A Removable Chest Plate That Hides The Individual Numbered Organs Of The Digestive System 5. Detachable Muscles Include: Deltoid, Brachioradialis With Extensor Carpi Radialis Longus And Brevis, Biceps Brachii, Pronator Teres With Palmaris Longus And Flexor Carpi Radialis, Sartorius Muscle, Rectus Femoris, Extensor Digitorum Longus, Tensor Faciae Latae, Gluteus Maximus, Biceps Femoris, Semitendinosus, Gastrocnemius, Soleus. 6. Removable Organs Include: Brain (2parts), Lungs (2 Parts), Heart (2 Parts, Liver, Intestines, Stomach 7. Base Is 13" X 9" (removable) 8. Weighs 12 Lbs. (approximately) 9. Plastic Material 10. Non-toxic Material 11. Carton Box Packaging 6,000.00 126,000.00 35 Pc Massage Bed / Table. Materials: Hard Wood With Steel Bracings, Hardwood Frame, Marine Plywood Deck; Color: Black Dimensions: W:75 Cm X L:183 Cm X H: (adjustable) Height: Adjustable From 24 In. - 33in. Leg Thickness - 35mm (minimum) Cushion System: High Density Foam (7.5 Cm / 2.95") Minimum With Pu Leather Cover (1mm Thick) Finishing: Round Corner Weight Capacity: 250 Kg(minimum) Gross Weight: 21 Kg (approximate) 2 End Support Bearer To Strengthen The Base And Increase Weight Capacity Accessories - Aluminum Headrest (adjustable) + Face Plug + Armrest + Arm Sling + Carry Case. Portable And Foldable 15,000.00 525,000.00 35 Pc Massage Chair. Ii 1. Padded With 3" Thick, High-density, Small-cell Foam 2. Size: 14"-diameter Seat (minimum) But Without Back And Arm Rest, With Metal Post And Hard Plastic Star. 3. Pneumatic Spring Will Effortlessly Adjust The Height From 18" To 24" With The Pull Of A Lever 4. Five Heavy-duty, Smooth-rolling Wheels 5. Load Capacity: 265 Lbs / 120 Kg (maximum) 6. Smooth Surface And No Sharp Edges 7. Any Color With One Color Only For Whole Lot 5,000.00 175,000.00 35 Pc Sphygmomanometer. Aneroid Type; (for Adult Use) Large Cuff Sizes: 33 To 42 Cm Arm Diameters Accuracy: ±3mm Hg; Measurement Range : 0mm Hg To 300mm Hg; Smallest Scale: 1mm Hg Index And Range Markings On The Dial For Clear Readings Nylon Cuff Is Durable And Stain Resistant With A Velcro Closure Inflation System Is Latex Free And Has An Easy-release Deflation Valve Chrome-plated Brass Air Release Valve; Set Includes: 1 Unit Sphygmomanometer; 1 Zippered Nylon Carrying Case Smooth Surface And Edges, Non-toxic Material 2,500.00 87,500.00 35 Pc Stethoscope. Chest-piece Description: Stainless Steel Double Chest Piece Color: Black Tubing Description: Y-tube Pvc Uses Extra Soft Replaceable And Pivotable Ear Tips The Binaural Is Chromium-plated Chest-piece Diameter: 44 Mm (minimum) And Has Non-chill Rim Overall Length: 29" /74 Cm (minimum) The Stethoscope Is Latex-free Comes With A Pair Of Replacement Ear Tips, A Replacement Membrane, And A Name Plate Smooth Surface And No Sharp Edges 6,829.20 239,022.00 21 Pc Talking Sphygmomanometer. Type: Arm Type Blood Pressure Monitor (talking English), Nylon Cuff Sizes: 33 To 42 Cm Arm Dia. Lcd Digital Display: Systolic, Diastolic, Pulse Rate With Real Voice, Loud And Clear, Announcing Blood Pressure Automatically When Reading Is Detected And Displayed Simultaneously Dimensions: 98mm*126mm*60mm (approximate) Hard Plastic Casing, Smooth Surface And No Sharp Edges, Non-toxic Materials Measurement Range : 0mm Hg To 300mm Hg; Smallest Scale: 1mm Hg Weight: 450g (approximate) Pressure Measurement Range: 20~280mmhg(0.4kpa-37.3kpa) Pressure Accuracy: ±3mmhg(±0.4kpa) Pulse Measurement Range: 40 ~199 Beats /min Voltage: 4*aaa Alkaline Batteries Or Power Adapter Certificate: Ce Rohs Intelligent Automatic Pressurization And Decompression Incorrect Prompting Function Automatic Shutdown: 1 Min After Last Operation Carton Box Packaging 3,500.00 73,500.00 21 Pc Talking Thermometer. Case Material: Hard Plastic Sensing Unit: Thermistor Measurement Method: Actual Measurement Measurement Range: 32 C - 42 C (89.6f-107.6f) Measurement Accuracy: ± 0.1c 32c-42.0c (± 0.2 F 89.6.9f-107.6f) Power Supply: 1.5v Dc, Lr41 Alkaline-magnesium Button Battery Real Voice (loud And Clear In English) Announces Temperature Automatically When Reading Is Detected Temperature Display: 3-digit, +deg C (deg F) Display In 0.1 Degree Increment Dimension Approx.: 2.0 (w) X 4.4 (h) X 1.2 (d) Inches (not Including Probe) / 51 (w) X 110 (h) X 30 (d) Mms (not Including Probe) Choices In Degrees Celsius Or Fahrenheit Talk Button Repeats Last Temperature Reading Last Reading Memory Auto Switch Off Accessories: Protective Case, 5 Probe Covers, Instruction Sheet Paddle Shape With Sensor On Small End 2,599.00 54,579.00 35 Pc Thermometer, Digital. Case Material: Hard Plastic Sensing Unit: Thermistor Measurement Method: Actual Measurement Measurement Range: 32 C - 42 C (89.6f-107.6f) Measurement Accuracy: ± 0.1c 32c-42.0c (± 0.2 F 89.6.9f-107.6f) Power Supply: 1.5v Dc, 1 Lr41 Alkaline-magnesium Button Battery When Measured At A Standard Room Temperature Of 23 Deg C (73.4 Deg F) In A Test Tank Held At Constant Temperature Power Consumption: 0.1mw Low Battery Indication: Battery Symbol Displayed Temperature Display: 3-digit, +deg C (deg F) Display In 0.1 Degree Increment Memory: Last Measuring Reading Beeper Function: 1 Beep When Power On 3 Beeps After Measurement Completed External Size (mm): 19.4(w) × 132.5 (l) × 10.0(d) Accessories: Protective Case, Test Battery, 5 Probe Covers, Instruction Sheet Paddle Shape With Sensor On Small End 2,599.00 90,965.00 21 Pc White Board. White Board, Floor Standing, Rolling Board: White Formica Laminated, Plane Will Not Deform. Board Size: Rectangular 1800mm W X 1000 To 1200mm H, Board Edges Secured With Aluminum Clip Edging 17 Mm (minimum) With Plastic Corner Caps Comes With Metal Tray For Marker And Eraser The Stand And Frame Are Constructed With Aluminum Or Powder Coated Steel 25mm Square Tube (minimum), Sturdy, No Wobble With 4 Lockable Hard Plastic Caster Wheels Overall Height From Floor: 210 To 214cm Smooth Surface, No Sharp Edges 800.00 16,800.00 30 Set Allen, Wrench. 1. Material: Chrome Vanadium Steel, Hrc 38 To 60; 2. Set Of 10 Pieces: 1.5 Mm, 2 Mm, 2.5 Mm, 3 Mm, 4 Mm, 5 Mm, 5.5 Mm, 6 Mm, 8 Mm, 10 Mm; 3. With Holder/ring To Keep The Set Intact; 4. Label Of Sizes Engraved In Each Allen Wrench; 5. Smooth Surfaces And No Sharp Edges 6. Plastic Pack By Set 550.00 16,500.00 30 Pc Anti-static Device (anti-static Wrist Strap). Consists Of: A) Adjustable And Elastic Wristband With Integrated 1 Mega Ohm Resistor, B) Banana Plug With Alligator Clip For Connecting To Ground (or Equivalent), C) At Least 59" Long Coiled Cord; D) Non Toxic Material E) Carton Box Or Plastic Pouch Packaging 1,200.00 36,000.00 60 Pc Combination Pliers, 8". Type: Combination Pliers; Body Shape: Square Nose Material: Chrome Vanadium/forged Steel Length: 9 Inches (minimum) Insulation Range: 1000 Volts (etched On The Handle) Design: Square Nose With Serrated Jaw Comes With Nickel Plated Finish, Side Cutter And Insulated Handle Must Be Branded (brand Must Etched Either In The Head Or On The Handle) 550.00 33,000.00 60 Pc Crimping Tool (rj 11/45). 1. Ratchet Crimp Tool 2. All-in-one Tool That Can Strip, Cut, And Crimp 3. Lightweight Steel Frame 4. Rj-11/45 Compatible 5. Positions For 8p/8c, 6p/6c And 4c Connectors 6. Lightweight, Compact, And Durable 7. Smooth Surface And No Sharp Edges Except Cutting Edges 8. Carton Box Packaging 658.00 39,480.00 18 Pc Desoldering Pump. 1. Material : Plastic Or Aluminum Housing; 2. Replaceable Heat-resistant Plastic Tip; 3. Length : Minimum Of 6 Inches; 4. Effective In Removing Solder; 5. Smooth Surface And No Sharp Edges 6. Carton Or Plastic Packaging 3,000.00 54,000.00 12 Pc Electric Drill, Portable. Type: Electric Power Material: Hard Plastic Rated Voltage: 220 / 240 Volts, Ac 60 Hz Power In Watts: 550 To 650 Watts Speed: Variable Speed Chuck Capacity: 2 To 13 Mm Power Cord Must Have Flat Blade Attachment Plug (type A Plug) Comes With Hss Drill Bits: 2mm 4pcs. 4 Mm 4pcs. 6 Mm 4pcs. 8 Mm 4pcs. 10 Mm 4pcs.12 Mm 4pcs. 12.5 Mm 4pcs. Total- (28 Pcs) Masonry Drill Bits; 4 Mm 2pcs. 6 Mm 2pcs.8 Mm 2pcs. 10 Mm 2pcs. 12 Mm 2pcs. Total- ( 10 Pcs.) With Hammer Function For Concrete Drilling Comes With English User's Manual Includes Of The Following: A. A Diagram Of The Parts With Label; B. Assembly Instructions; C. Operating Procedures; D. Safety Precautions When Using The Equipment; E. Basic Troubleshooting And Maintenance Procedures. Warranty Period Of Parts And Service: 1 Year 4,500.00 54,000.00 12 Pc External Optical Drive. 1. Interface: Usb 3.0 Or Better; 2. Compatibility: Windows 2000, Xp, Vista, 7, 8, 10, Apple Mac, Linux Or Better; 3. Read Speed: At Least 8x Dvd, At Least 24x Cd; 4. Write Speed: At Least 4x Dvd, At Least 16x Cd; 5. Package Includes: A) 1 X External Optical Drive, B) 1 X Usb Power Cable, C) 1 X Usb Data Cable, 6. Item Size: 5.4"x 5.51"x0.63"(l X W X H) Approximate 7. Metal Or Hard Plastic Casing 8. Smooth Surface And No Sharp Edges 9. Carton Box Packaging 10. With User's Manual In English Which Includes: A. A Diagram Of The Parts With Their Names, B. Operating Procedures 11. With Service Centers Located In Major Cities In The Philippines. 2,000.00 24,000.00 60 Pc Flash Drive. 1. Capacity: 64 Gb ; 2. Connectivity: Usb 3.0, Backward-compatible With Usb 2.0, Plug And Play ; 3. Device/os Compatibility: Windows Vista, Windows 7, 8, 10, Mac Os 10.6+ Or Later Versions; 4. Form: Swivel Type Or With Cover; 5. Dimension: 0.40 X 0.80 X 2.31 In. (10.16 X 20.32 X 58.67 Mm) Approximate 6. Metal Or Hard Plastic Casing 7. Smooth Surface And No Sharp Edges 8. Carton And/or Plastic Packaging 9. User's Guide On Name Of Parts, Connection Guide, Maintenance And Safety Precautions. 800.00 48,000.00 60 Pc Flashlight, Head-mounted. 1. Type: Rechargeable, Head Mounted Led Flashlight; 2. Minimum Of 160 Lumens; 3. Beam Distance: Minimum Of 150 Meters; 4. Includes 220 V Ac Charger/power Adaptor (or Equivalent); 5. Charging Time: 3-6 Hours; 6. Provides Up To 30 Hours (minimum) Of Constant Light On A Single Full Charge; 7. Approximate Size: 60x 30mm 8. Smooth Surface And No Sharp Edges 9. Carton Box Or Plastic Pouch Packaging. 10. With User's Manual In English 450.00 27,000.00 60 Pc Hub/switch. 1. Standards And Protocols: Ieee 802.3, Ieee802.3u, Ieee802.3x Csma/cd 2. Interface: 8 10/100mbps Ports, Auto-negotiation, Auto-mdi/mdix 3. External Power Supply Adapter: 100 240vac,50/60hz 4. Fanless 5. Data Rates: 10/100mbps At Half Duplex ; 20/200mbps At Full Duplex 6.led Indicator: Power, 1, 2, 3, 4, 5, 6, 7, 8 7.dimensions: 5.3 X 3.1 X 0.9 In. (134.5 X 79 X 22.5mm) (approx.) 8. Transfer Method: Store And Forward 9. Advance Functions: Green Technolgy, Saving Power Up To 73%; 802.3x Flow Control, Back Pressure; Auto-uplink Every Port 10. Certification: Fcc, Ce, Rohs 6,790.00 407,400.00 30 Pc Lan Cable Tester. 1 Cable Tester With Led Indication For Rj12, Rj11, Rj45, Cat5e, Cat5, 10/100 Base - T. 2 Main Tester: 1-2-3-4-5-6-7-8-g; 3 Remote Tester: 1-4-3-2-5-6-7-8-g; 4 Power Supply: 9 V Battery (included); 5 Capable Of Testing Crossover, Straight-through, And Rollover Cables; 6 Includes Plastic Case Or Pouch; 7 With User's Manual In English 4,500.00 135,000.00 60 Pc Long Nose Pliers, 8". 1 Material: Chrome Vanadium Steel, Hrc 38 To 60; 2 Length: 7 Inches (minimum); 3 Handle Type: Curved Handle With Rubber Cushion For Easy Grip; 4 Jaws Type: Knurled And Long Tempered; 5 Comes With Hardened Cutting Edges And Chrome-nickel Finish. 6. Smooth Surface And No Sharp Edges 7. Carton Or Plastic Packaging 550.00 33,000.00 60 Pc Multimeter, Digital. Material: Plastic Casing Main Functions: Auto Range/data Hold/back Light/ Led Lamp/diode Test/triode Test/continuity/ Over Load Protection/low Battery Indication/auto Power Off/short-circuit Protection. Display: True Rms, 6000 Counts, 3 5/6 Digits Overload Display: Display Ol Dc Voltage:600mv/6v/60v/600v(0.5%+3), 1000v (0.5%+3) Ac Voltage:600mv/6v/60v/600v/750v (0.8%+5) Dc Current:600a/6000a/60ma/600ma/10a (1.2%+3) Ac Current:600a/6000a/60ma/600ma/10a (1.5%+3) Resistance:600/6k/60k/600k/(1.0%+3) ,6m/60m (1.5%+3) Capacitance: 10nf/100nf/1000nf/10uf/100uf/1000uf (4.0%+5), 10mf/100mf(5.0%+5) 1,000.00 60,000.00 120 Pc Patch Panel (48 Ports). 1. Network Patch Panel 2. 48 Port Patch Panel 3. Cat6 Cable 4. Material: Abs Plastic 5. Application: Utp(unshielded) 6. Certification: Rohs, Iso, Ce 7. Rj45 Connector : Two Rows (1-24 Ports & 25-48 Ports) 8. Transport Package: 1pcs/box 9. Smooth Surface And No Sharp Edges 6,950.00 834,000.00 6 Pc Pc Video Camera. 1) 5.0 Mega Pixel Web Camera, Usb-type; 2) With Microphone For Laptop And Desktop Pc Use; 3) Resolution: At Least 640 X 480; 4) Support Windows Xp/7/8/equivalent Mac Os Or Later Versions; 5) With User's Manual In English Which Includes: A) A Diagram Of The Parts With Their Names, B) Operating Procedures C) Basic Troubleshooting And Maintenance Procedures. 6) Hard Plastic Or Metal Casing 7) Smooth Surface And No Sharp Edges 7,000.00 42,000.00 30 Pc Philip's Screwdriver, 8" Insulated. 1. Shank Material: Chrome Vanadium Steel, Hrc 38 To 60; 2. Handle Material: Molded Plastic 3. Overall Length: 8 Inches (minimum) 4. Insulation Protection (including Shank): 1000vac/ 1500vdc, Vde Certified (or Its Equivalent) 5.non Slip Handle Design 6. Carton Or Plastic Packaging 400.00 12,000.00 30 Pc Precision Screwdriver, 8" Insulated. 1. Material: Hardened And Tempered Steel; 2. 1 Set Comes With The Following: A) 3 X Phillips Tip No. 00, 0, And 1 ; B) 6 X Standard Tip No. 1, 1.2, 1.4, 1.8, 2.4, And 3.0; C) 1 X Awl; D) 1 X Magnet; E) Plastic Storage Case; 3. Non Slip Design Handle 400.00 12,000.00 30 Pc Soldering Iron, 60w. 1. Type: Iron Rod 2. Voltage: 220/240vac, 60hz, Single Phase; 3. Power: 60w (minimum); 4. Body Length: 8.3 Inches (21 Cm) Approximate 5. Cord Length: 1.5 Meters (minimum) 6. Handle: Plastic; (non Slip Handle) 7. With User's Manual Written In English That Contains User's Guide, Operating Procedure, Parts With Description, Safety Procedure, And Maintenance; 8. Interchangeable Copper Tip; 9. Should Have Available Spare Parts Nationwide For A Minimum Period Of 5 Years; 10. Carton And/or Plastic Packaging 1,670.00 50,100.00 30 Pc Standard Screwdriver (flat), 8" Insulated. 1. Shank Material: Chrome Vanadium Steel, Hrc 38 To 60; 2. Handle Material: Molded Plastic 3. Overall Length: 8 Inches (minimum) 4. Insulation Protection (including Shank): 1000v, Vde Certified (or Its Equivalent) 5.non Slip Handle Design 6. Carton Or Plastic Packaging 550.00 16,500.00 30 Pc Uninterruptible Power Supply (ups). The Item Shall Have The Following Specifications: 1. Type: Battery (included): Lithium-ion Battery Or Maintenance-free Sealed Lead-acid Battery With Suspended Electrolyte: Leakproof 2. Voltage: Nominal Input Voltage: 230v, 50/60 Hz 3. Output Power Capacity: 600va (minimum) 4. Output Connections :2 Universal Receptacle (minimum) 5. Cord Length: 1 Meter (minimum) 8,000.00 240,000.00 6 Pc Usb External Hd. 1) 1tb Portable/external Hard Drive 2) Application: Laptop / Desktop Pc 3) Interface Type: Sataii 4) Installation: Mobile 5) Formatted Capacity: 1000gb(windows Display About 298gb) 6) Size(mm): 14.29 X 80.01 X 17.60 (approx.) 7) Metal Casing 2,500.00 15,000.00 30 Pc Wire Stripper. Type: Spring-loaded Self-opening; Body Shape: Long Jaw With Slot Blade Material: Hardened Alloy Steel (sharp Edges To Strip And Cut The Wires) Wires To Be Stripped: 10 Awg To 24 Awg Length: 7 Inches (minimum) Comes With Automatic Self- Adjusting Spring, Crimping Slot, And Hard 275.00 8,250.00 60 Pc Wireless Access Point. Type: Wireless Access Point Dual Band Wifi Band / Data Transfer Rate: 867 Mbps At 5 Ghz And 300 Mbps At 2.4 Ghz Band Operating Modes: Access Point (ap), Bridge, Wireless Client, Repeater Interface: One 10/100m Ethernet Port(rj45), Support Passive Poe Power On/off Button And Reset Button Comes With External Power Supply: 5vdc-12vdc / 0.5a-1.0a Dimensions ( L X W X D ): (76-191 ×47-125 ×30-68mm) 3,489.60 209,376.00 Total 22,623,009.00 2. The Department Of Education, Schools Division Office Of Albay Now Invites Bids For The Above-cited Procurement Opportunity. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders In The Amount Of Php 25,000.00 Pursuant To The Latest Guidelines Issued By The Gppb. Delivery Of The Goods Is Thirty (30) Calendar Days From The Date Of The Ntp. Delivery Should Be At The Designated Schools (door-to-door Delivery). Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Department Of Education, Schools Division Office Of Albay, Bids And Awards Committee Office, And Inspect The Bidding Documents At The Address Given Below From Monday To Friday During Office Hours (8:00 Am To 5:00 Pm). 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 13 To December 3, 2024; 9:00 Am From The Address Below And Upon Payment Of Php 25,000.00 As The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity (www.depedalbay.com) Starting November 13, 2024 Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Education, Schools Division Office Of Albay Will Hold A Pre-bid Conference On November 20, 2024; 9:00 Am At 2f Lobby, Deped Sdo Albay, Ligñon Hill, Bogtong, Legazpi City, Which Shall Be Opened To Qualified Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before December 3, 2024; 9:00 Am. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb. Bid Opening Shall Be On December 3, 2024; 9:00 Am At 2f Lobby, Deped Sdo Albay, Ligñon Hill, Bogtong, Legazpi City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. Prospective Bidders Are Strongly Encouraged To Order Or Download The Electronic Copy Of The Bidding Documents From The Philgeps Website, For Them To Be Included In The Document Request List Of The Project. The Bidding Documents May Be Viewed Also At The Deped Sdo Albay Schools Division Office Website: Www.depedalbay.com. 9. The Department Of Education, Schools Division Office Of Albay Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Jade O. Alberto Education Program Supervisor Bac Secretariat Head-designate Office Of The Bids And Awards Committee 2nd Floor, Deped Sdo Albay, Ligñon Hill, Bogtong, Legazpi City Tel.no.: 052-204-8535 11. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.depedalbay.com November 12, 2024 (sgd.) Bernie C. Despabiladero, Edd Assistant Schools Division Superintendent Bac Chairperson For Goods And Consulting Services