Center For Health Development Region Vi Tender

Description Qty Unit "articles/description " Power Generating Set, 30 Kva With Ats, To Wit; 1 Unit Specifications For Power Generating Set: Brand New Capacity: 30 Kva Voltage: 220 - 240 Vac Phase: Three Phase Frequency: 60 Hz Control Panel: Digital Control Panel Equipped With The Following: Automatic Shut Off Sensors (engine Low Oil, High Coolant Temperature, Over Crank/under Speed, Over/under Frequency) Emergency Push Button, Shut Off Switch Engine Diesel Engine Four (4) Cylinder In-line, 4-stroke Cycle, Direct Injection, Water Radiator Cooling, Turbo Charged, Electric Injection, Water Radiator Cooling, Turbo Charged, Electric Starting. Mounted On A Heavy Steel Frame With Vaibration Isolators Enclosure An Enclosure For The Equipment Shall Be Provided For Protection And Noise Reduction. Alternator Close Coupled To Engine, Self Exciting, Self Regulating, Insulation Class H, Brushless, Single Bearing With Built-in Automatic Voltage Regulator (avr). Battery Battery Charging Unit Radiator Tropical Type Radiator With Integral Fan Fuel Tank Fuel Tank Base Mounted Tank With A Capacity Of 8 Hours Continuous Operation Automatic Transfer Switch (ats) - External Or Built-in Description: Brand New, Electrically And Manually Operated With Mechanically Interlocked Components With Relay Type Of Positive Control Board. Digital Control, Solenoid Type, Can Be Controlled Remotely And Manually The Genset. The Rating Of The Ats Should Be Compatible With The Power Of The Genset. Specifications: Control Type: Relay Type Positive Control Rating: 200 - 250a, 220/440v Pole: Single Phase Hertz: 60hz Type: Breaker Type Nr: Normal Relay Enclosure: Nema - 1, Powder Coat Time Delay Emergency To Normal (tden) Time Delay Normal To Emergency (tdne) Time Delay Engine Cool-off (tdec) Time Normal Relay (tnr) Emergency Relay (er) Under/over Voltage Relay Documentary Requirements: 1. Technical Data Or Original Brochure Of The Equipment Showing All The Technical Specifications In English Language. 2. Valid And Current Certificate Of Compliance From The Manufacturer: A. Iso 3046 B. Iso 45001:2018 C. En Iso 12100:2010 D. Oem (original Equipment Manufacturer) 3. Valid Certificate Of Distributorship (as First Tier Distributor) Issued By The Manufacturer For Each Equipment Authorizing The Bidder To Sell/distribute The Offered Equipment. 4. Proof (such As Sales Invoice) That The Offered Equipment Has Been Sold To Other Health Facilities In The Philippines. 5. Certification From The Legal Manufacturer That The Supplier Has The Capability, Personnel And Equipment/tools For The Corrective And Preventive Maintenance Of The Unit. 6. The Supplier Should Have A Readily Available Technician In Region 6. Provide List Of Engineer Or Technical Personnel Presently Employed By The Supplier Or Authorized By The Manufacturer Who Shall Perform Corrective And Preventive Maintenance Of The Product. Attach Photocopy Of Id And Training Certificates Specific To The Equipment. 7. The Supplier Must Have An Office Within Panay Area And Has Been Operating As Distributor For Power Generating Sets For At Least Ten (10) Years. 8. Certification From The Doh Wv Chd Supply Office That The Supplier Has No Pending Transactions Or Incomplete Delivery, Installation, Training And Demonstration Beyond The Delivery Period Indicated In The Purchase Order With Any Existing Doh-wv Chd Projects. Requirement If Awarded The Contract: 1. Completion Period: Delivery, Installation, Testing And Commissioning Of The Equipment And Its Accessories, Including Training Of The End-users And Maintenance Staff Must Be Completed Within 120 Calendar Days Upon Receipt Of The Notice To Proceed. 2. The Supplier Shall Conduct Testing And Commissioning On Site. 3. Training: The Supplier Will Provide Training/orientation On The Proper Use And Maintenance Of The Equipment To The End-users And To The Hospital Maintenance Staff. 4. Warranty: Warranty Certificate For Two (2) Years On Parts And Service. The Supplier Shall Either Repair Or Replace Any Item Or Part In The Equipment That Is Found To Be Defective In Material Or In Workmanship Under Normal Use. The Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Testing And Commissioning. 5. The Supplier Shall Conduct Preventive Maintenance And Calibration On The Equipment At Least Every Six Months Or According To The Manufacturer's Recommendations On The Schedule Of Preventive Maintenance, Within The Warranty Period Free Of Charge. 6. The Supplier Shall Conduct The Necessary Corrective Maintenance Within Fourteen (14) Calendar Days Upon Notification From The End-user Regarding The Breakdown/defects. He Shall Ensure That The Equipment Are Appropriately Repaired Or Replaced And Shall Be In Good Working Condition Thereafter. The Number Of Days Where The Equipment Is Unusable Due To Equipment Defects/faults Shall Be Added To The Warranty Period. 7. The Supplier Shall Specify Post Warranty Comprehensive Preventive Maintenance Cost Including List And Prices Of Major Spare Parts Of The Equipment For The Next Three Years After The Warranty Period. 8. The Supplier Must Provide The End-user Two (2) Hard Or Soft Copies Of The Following: A. Service Manual In English Language B. Operations Manual In English Language C. Certificare Of Calibration From The Manufacturer 9. With Non-detachable Stickers (decals) Printed With Doh6 Hfep 2023 Letters Conspicuously Displayed. (color: Green; Letter Size: H = At Least 2 Inches). Delivery Site: Maasin Shc