Cars Tenders

Details: Description Republic Of The Philippines General Services Office Province Of Batangas Invitation To Submit Quotation The Provincial Government Of Batangas, Through Its General Services Office (gso) Invites All Suppliers, Distributors And Manufacturers To Quote On The Following Projects: Name Of Project Approved Budget For The Contract Source Of Fund 1. Repair And Maintenance Of Rp Service Vehicle With Plate No. Saa 1122 And Property No. 1511-mv-016. 55,150.00 General Fund 2. Purchase Of Speaker For Use Of The Office Of The Provincial Agriculturist. 99,800.00 General Fund 3. Purchase Of Pennant Banner To Be Used For Community Food Market. 75,600.00 General Fund 4. Purchase Of Dining Set For Use Of The Office Of The Provincial Agriculturist. 140,000.00 General Fund 5. Repair And Maintenance Of 7 Units Led Monitor. 53,500.00 General Fund 6. Purchase Of Air Freshener 5.5 Ml Car Freshener, Air Freshener Antibacterial Disinfectant Spray 320ml, Air Freshener Scented Gel 200g, Etc. For Use Of The Office Of The Provincial Administrator. 156,935.00 General Fund 7. Purchase Of Tarpaulin Ink (black, Cyan, Magenta, Etc.) For Use In Printing Of Tarpaulin. 52,625.00 General Fund 8. Purchase Of Foods To Be Served To The Monthly Meeting Of The City/municipal Budget Officers Of Batangas. 56,000.00 General Fund 9. Purchase Of 10 Units Two Way Handheld Radio For Use In The Office Of Pposd. 111,000.00 General Fund 10. Repair And Maintenance Of Rp Service Vehicle With Plate No. Sna 6024 And Property No. 2006-tf-005-4. 57,700.00 General Fund Interested Suppliers Are Required To Submit Their Valid And Current Mayor’s Permit, Philgeps, And Duly Signed Sealed Quotation As Mandated By The Annex “h” Appendix A Of The Republic Act No. 9184 And Its Revised Irr. The Contract Shall Be Awarded To The Lowest Calculated Responsive Supplier Which Complies With The Minimum Description As Stated Above And Other Terms And Conditions Stated In The Request For Quotation Form. Duly Signed And Sealed Quotation Must Be Properly Labeled With The Rfq Specifying The Pr No/s. Of The Project Interested In Which Shall Be Submitted At The General Services Office, Provincial Capitol Compound, Kumintang Ibaba, Batangas City Not Later Than March 03, 2025 At 9:30am. For Further Inquiries, You May Contact Maria Lita R. Balitaan At 980-5972 Or Thru Email Pgsobatangas@gmail.com. (sgd.) Paulita M. Maneja, Dpa General Services Officer

Details: Title: Recouvrement Des Créances Impayées Pour Le Compte De L'otw description: Description Du Marché : L’opérateur De Transport De Wallonie (otw) Est Une Société De Transport Public Active En Wallonie Depuis 1991. Il Transporte Annuellement Près De 150 Millions De Voyageurs Sur Ses Lignes Régulières. Pour Financer Une Partie Des Coûts De Ce Transport, L’otw Perçoit Des Recettes De Différentes Manières : Les Recettes Des Titres De Transport (prépaiement), La Facturation B2b Et B2c (postpaiement) Ainsi Que La Perception Des Amendes Administratives (en Cas De Non-paiement Ou D’incivilité À Bord Du Bus). Certaines De Ces Créances Restent Malheureusement Impayées Et Doivent Faire L’objet D’une Procédure De Recouvrement. Jusqu’à Maintenant, Ces Procédures Ont Été Gérées Localement Par Les Différentes Business Units (au Nombre De Cinq). Au Mois De Juin 2024, Le Comité De Direction De L’otw A Décidé D’harmoniser Les Procédures De Recouvrement Et De Lancer Un Marché Public Afin De Recouvrer Ces Créances Sur L’ensemble De La Wallonie. Les Recettes De L’otw Sont Réparties Comme Suit (les Recettes Des Titres De Transport Sont Exclues Du Périmètre Car Payées Anticipativement) : Factures Transport Scolaire Autres Factures Amendes Nombre 1.500 8.500 30.000 Nombre De Dossiers En Recouvrement 70 25 6.000 Montant Moyen En Recouvrement 120 Euros 3.500 Euros Entre 75 Et 300 Euros Des Informations Complémentaires Se Trouvent Dans La Partie Iii Description Des Exigences Techniques. La Société De Recouvrement Choisie Devra Réaliser Toutes Les Étapes Du Processus De Recouvrement (appels Téléphoniques, Visites À Domicile, Analyse Des Banques De Données Disponibles, …) En Ce Compris Faire Appel À Un Huissier Ou À Un Avocat Si La Situation Financière Du Créancier Le Permet. Lieu De Prestation Des Services : Région Wallonne

Details: Title: Recouvrement Des Créances Impayées Pour Le Compte De L'otw description: Description Du Marché : L’opérateur De Transport De Wallonie (otw) Est Une Société De Transport Public Active En Wallonie Depuis 1991. Il Transporte Annuellement Près De 150 Millions De Voyageurs Sur Ses Lignes Régulières. Pour Financer Une Partie Des Coûts De Ce Transport, L’otw Perçoit Des Recettes De Différentes Manières : Les Recettes Des Titres De Transport (prépaiement), La Facturation B2b Et B2c (postpaiement) Ainsi Que La Perception Des Amendes Administratives (en Cas De Non-paiement Ou D’incivilité À Bord Du Bus). Certaines De Ces Créances Restent Malheureusement Impayées Et Doivent Faire L’objet D’une Procédure De Recouvrement. Jusqu’à Maintenant, Ces Procédures Ont Été Gérées Localement Par Les Différentes Business Units (au Nombre De Cinq). Au Mois De Juin 2024, Le Comité De Direction De L’otw A Décidé D’harmoniser Les Procédures De Recouvrement Et De Lancer Un Marché Public Afin De Recouvrer Ces Créances Sur L’ensemble De La Wallonie. Les Recettes De L’otw Sont Réparties Comme Suit (les Recettes Des Titres De Transport Sont Exclues Du Périmètre Car Payées Anticipativement) : Factures Transport Scolaire Autres Factures Amendes Nombre 1.500 8.500 30.000 Nombre De Dossiers En Recouvrement 70 25 6.000 Montant Moyen En Recouvrement 120 Euros 3.500 Euros Entre 75 Et 300 Euros Des Informations Complémentaires Se Trouvent Dans La Partie Iii Description Des Exigences Techniques. La Société De Recouvrement Choisie Devra Réaliser Toutes Les Étapes Du Processus De Recouvrement (appels Téléphoniques, Visites À Domicile, Analyse Des Banques De Données Disponibles, …) En Ce Compris Faire Appel À Un Huissier Ou À Un Avocat Si La Situation Financière Du Créancier Le Permet. Lieu De Prestation Des Services : Région Wallonne

Details: Description Republic Of Philippines City Of Canlaon Office Of The Bids And Awards Committee Request For Sealed Quotation Date: 7-feb-25 Quotation No.: 2025-02-034 Pr No.: 2025-01-34-b Department: Gso, Canlaon City Bac Control No.: 34 Sir/madam: Please Quote Your Lowest Price On The Items Listed Below, Subject To The General Conditions On The Last Page, Stating The Shortest Time Of Delivery And Submit Your Quotation Duly Signed By Your Representative Not Later Than 02/11/2025 In The Return Envelope. Procurement Terms & Conditions 1. The Total Approved Budget For The Contract (abc) Is (p200,000.00) 2. Price Quotation Should Be Inclusive Of The Required Tax Obligations 3. Delivery Period Is Within 7 Days Upon Receipt Of Notice To Proceed (ntp) 4. Refusal To Accept An Award Maybe Ground For Imposition Of Administrative Sanctions Under Rule Xxiii Of The Revised Irr Of Ra 9184 "5. Failure Of The Supplier To Deliver Goods And Render Services Under The Contract Within The Specified Delivery " Schedule Shall Be Liable For Damages For The Delay. Zosilito A. Ongco Vice Chairman/temp.presiding Officer Item No Qty Unit Of Issue Item Description Unit Cost Unit Price Total Price 1 1 Pc Steering Pump Isuzu Elf Gen 458 9,800.00 2 1 Pc Steering Rack L300 2,000.00 3 2 Pcs Suspension Bushing Foton 850.00 4 1 Set Tie Rod End Toyota Ambulance Hi-ace 4,250.00 5 2 Pcs Tire Rim # 15 Pajero 3,860.00 6 1 Pc Turbo Actuator Foton 850.00 7 1 Pc Head Lamp Assembly Canter 6,900.00 8 1 Set Front Bearing Toyota Ambulance Hi-ace 700.00 9 1 Pc Auxilliary Fan Motor Hyundai Porter 1,650.00 10 1 Pc Clutch Operating Assembly Toyota Ambulance Hi-ace 1,755.00 11 1 Pc Wheel Cylinder Hyundai Porter 5,655.00 12 1 Pc Cross Joint Toyota Ambulance Hi-ace 580.00 13 1 Unit Battery, 9 Plates Toyota Jeep 8,250.00 14 2 Pcs Transmission Bearing Hyundai Porter 1,550.00 15 2 Pcs Ball Joint Foton 2,350.00 16 3 Pcs Battery, 12 Volts, 11 Plates Ls, L200 & L300 Amb 8,500.00 17 1 Unit Brake Master, Assy 4bc2 Canter 7,500.00 18 2 Pcs Control Arm L300 2,500.00 19 2 Pcs Cross Joint Isuzu Pick Up 4ja1 3,200.00 20 4 Pcs Cross Joint W/ Sample Motorpool 2,720.00 21 1 Pcs Fan Belt, B-39 10pdi 500.00 22 2 Pcs Front Strut L300 Amb 580.00 23 1 Pc Fuel Pump Isuzu Ls 3,500.00 24 1 Pc Head Cover L300 780.00 25 2 Pcs Head Light Bulb L300 Ambulance 760.00 26 4 Pcs Headlight 4bc2 Canter 1,020.00 27 1 Set Hydrovac Repair Kit Toyota Ambulance Hii-ace 4,820.00 28 1 Set Idler Arm,assy Jeep 4,865.00 29 1 Set Ignition Switch Motorcycle 1,125.00 30 1 Set Ignition Switch D4bx Funeral Car 4,430.00 31 2 Pcs Inner Tie Rod End L300 Amb 1,600.00 32 2 Pc Inner Tube, 6.50 X 14 Isuzu Elf (long Bed) 675.00 33 1 Set Intake Valve L300 1,800.00 34 10 Pcs Liner Assembly 10pdi 3,500.00 35 1 Set Liner O-ring 10pdi 3,500.00 36 1 Set Motorcycle Sprocket Motorcycle 1,400.00 37 6 Pcs Noozle Tip L300 800.00 38 4 Set Oil Cylinder D4bx Funeral Car 1,820.00 Total For Use Of Trucks,service Vehicle & Heavy Equipment,gso,canlaon City Brand Model: Delivery Period: Warranty: Price Validity: After Having Carefully Read And Accepted Your General Conditions. I/we Quote On The Item/s At Price/s Noted Above. Canvassed By: ___________________________________ ___________________________________ (name And Signature Of Authorized Canvasser) (name & Signature Of Dealer/representative) Date: Address: Tel No.: Date:

Details: Description Bids And Awards Committee Request For Quotation The City Government Of Pagadian, Through Its Bids And Awards Committee (bac), Invites Suppliers/manufacturers/distributors To Apply For Eligibility And If Found Eligible, To Bid For The Hereunder Supplies/goods Charged To 1011-200-5-02-13-060-08 (repair & Maintenance - Heavy Equipment), Pagadian City, As Described Below: Goods-2025-02-124 Purchase Of Spareparts & Accessories For The Use Of City Government Vehicle. Item No. Qty Unit Of Issue Description Approved Budget For The Contract (abc) Unit Cost ₱ Total Cost ₱ Lot 1 Pr.no. 296- For The Toyota Grandia Tourer 1 1 Set Car Tent 8,100.00 8,100.00 Sub-total 8,100.00 Lot 2 Pr.no. 297- For The Use Of Dental Bus 1 1 Pc Aircon Compressor 49,950.00 49,950.00 Sub-total 49,950.00 Lot 3 Pr.no. 298- For Repainting Of Furtuner 1 1 Roll Molding Tape (875 X 15) 1,050.00 1,050.00 2 1 Bottle Rubbing Compound Premium (8oz) 978.00 978.00 3 1 Bottle Carnauba Wax Liquid (14 Oz) 978.00 978.00 4 4 Ltrs Topcoat Nippon 9700 2,240.00 8,960.00 5 1 Gal U-super White 8,120.00 8,120.00 6 1 Gal Body Filler 1,020.00 1,020.00 7 2 Qrts Spray Filler 756.00 1,512.00 8 1 Gal Epoxy Enamel Black 1,820.00 1,820.00 9 1 Qrts U-flat Black 1,302.00 1,302.00 10 15 Pcs Mt 3/4 56.00 840.00 11 5 Gal U-thinner 910.00 4,550.00 12 1 M Pranela 140.00 140.00 13 2 Pcs Tack Cloth 42.00 84.00 14 10 Pcs Sp #120 28.00 280.00 15 10 Pcs Sp #240 28.00 280.00 16 20 Pcs Sp #1200 28.00 560.00 17 10 Pcs Sp #1200 28.00 280.00 18 5 Pcs Sp #2000 42.00 210.00 Sub-total 32,964.00 Lot 4 Pr.no. 299- For Furtuner 1 2 Units Rock-end 12,110.00 24,220.00 2 2 Units Tire Rod End 2,940.00 5,880.00 3 2 Units Shock 8,260.00 16,520.00 Sub-total 46,620.00 Lot 5 Pr.no. 300 For Reefer Van 1 8 Set Stabilizer Bushing 2,520.00 20,160.00 2 6 Pcs Injector Assembly 16,380.00 98,280.00 3 1 Pc Suction Value 7,700.00 7,700.00 Sub-total 126,140.00 Lot 6 Pr.no. 301- For Reefer Van 1 4 Pcs Injector Assembly 4hk1 Engine 15,795.00 63,180.00 Sub-total 63,180.00 Lot 7 Pr.no. 302- For Mitsubishi Pick Up 1 1 Set Car Tent 6,750.00 6,750.00 Sub-total 6,750.00 Lot 8 Pr.no. 303- For Coaster Bus 1 1 Pc Clutch Disc 24,975.00 24,975.00 2 1 Pc Clutch Cover 27,675.00 27,675.00 Sub-total 52,650.00 Lot 9 Pr.no. 304- For Hyundai Coaster 1 1 Pc Flash Relay 4,760.00 4,760.00 Sub-total 4,760.00 Grand Total ₱ 391,114.00 " Quotation Forms Are Now Available At The Bac Secretariat And Upon Payment Of A Non-refundable Amount At 100.00 Per Set To The City Treasurer's Office-cashier. Quotations Are Evaluated On Lot Basis. Price Quotation Is Valid For 30 Calendar Days After Bid Opening." Submit Your Quotation Forms In A Sealed Envelope Per Project To The Bids And Awards Committee /secretariat On Or Before February 14,2025, 2:00 P.m. At The City General Services Office, City Hall, Pagadian City. The Bids And Awards Committee (bac) Reserves The Right To Reject Any And/ Or All Quotation Or Part Thereof, To Waive Formality Therein And/or To Accept The Quotations As May Be Considered Most Advantageous To The City Government Of Pagadian. Ms.jenny Rose Z. Egama Bac Chairperson Date Of Publication: February 11, 2025 To Febraury 14, 2025

Details: Title: Fourniture, Installation Et Mise En Service De Fours De Traitement Thermique, Y Compris La Formation - Lot 1 description: La Réalisation De Pièces Denses Par Impression 3d (additive Manufacturing) Nécessite La Mise En Place De 5 Étapes Qui Sont :  La Conception De Matériaux Sous Forme De Poudres Dont Les Propriétés Physiques Permettent Une Mise En Forme De La Matière Première Par Impression 3d (taille Des Particules, Morphologie, …) ;  La Conception De La Pièce Sous Forme D’un Fichier Stl Prenant En Compte Le Positionnement De La Pièce Sur La Plateforme De Conception Et Sa Stabilisation Au Travers De Renforts (évitant Sa Déformation) ;  L’impression De La Pièce, Couche Par Couche Du Matériau Désiré En Utilisant Une Imprimante Adaptée ;  La Récupération Et Le Nettoyage De La Pièce Noyée Initialement Dans Le Lit De Matériau Excédentaire ;  La Densification De La Pièce Qui Permet De Donner Les Propriétés Mécaniques Finales À La Pièce. Ce Marché Vise L’acquisition De Fours Qui Permettront Au Travers De L’application D’un Traitement Thermique Adapté De La Pièce De Lui Conférer Ces Propriétés Mécaniques Finales. Cette Étape De Densification Peut Être Scindée En 2 Phases : • La Première, Le Déliantage, Consiste À Éliminer De Manière Progressive Les Liants Organiques Présents Dans La Pièce Au Sortir De L’imprimante. En Effet, La Cohésion Des Matériaux Poudreux Utilisés Dans L’imprimante N’est Possible Qu’au Travers De L’utilisation De Liants Organiques. Ceux-ci Doivent Être Éliminés Pour Obtenir Une Pièce Exempte De Composés Organiques. Cette Étape Est Délicate Car Elle Vise La Décomposition Des Liants Organiques En Produits Gazeux Sous L’effet De Température En Présence D’air (dioxyde De Carbone). Elle S’effectue Généralement Dans Un Domaine De Température Compris Être 100 Et 1200°c Pour Des Rampes De Montée Très Lente (quelques Degrés Par Heure) Et Ce, Afin D’éviter L’apparition De Fissures Dans Les Pièces. • La Seconde, Le Frittage, Consiste À Porter La Pièce Déliantée À Très Haute Température Pour La Consolider. Les Grains De Matériaux Vont Ainsi Au Travers De Différents Mécanismes Croitre Et Conduire À Une Élimination De La Porosité Au Sein De La Pièce. Cette Étape Est Déterminante Car Elle Permet De Conférer Les Propriétés Mécaniques Finales Aux Pièces Traitées. En Fonction Des Matériaux Traités (céramiques Ou Métaux), Il Est Utile De Réaliser Ces Traitements À Des Températures Importantes (1200°c Et 3000°c) Et Sous Des Atmosphères Particulières, Soit Inerte, (argon/azote), Soit Réductrice (hydrogène), Pour Éviter L’oxydation Des Pièces (aluminium, Titane, Acier, Carbure, Nitrures, …). Ce Marché Vise L’acquisition De Plusieurs Fours De Déliantage, De Frittage Et De Synthèse Qui Permettront De Couvrir Le Traitement Thermique D’une Large Gamme De Matériaux (métaux Et Céramiques). Ces Fours Seront Utilisés Dans Le Cadre D’applications Liées À La Fabrication Additive, Que Ce Soit Pour La Conception Des Matériaux À Utiliser Dans Les Formulations (poudres), Ou Dans Le Traitement Final Des Pièces Après Synthèse. Le Présent Marché Est Constitué De 3 Lots. Lot 1 : 1 Four N°1 – 1800°c Ce Four Sera Principalement Utilisé Pour Le Frittage À Haute Température (1800°c) De Pièces En Matériau Réfractaire De Type Céramique.   Le Présent Marché Est Subsidié Par Le Plan National Pour La Reprise Et La Résilience Dans Le Cadre Du Projet « Plateforme Environnement Et Transition Énergétique ». Des Clauses Écologiques, Appelées « Clauses Dnsh » (do Not Significant Harm) Sont Prévues. Important : Informations Relatives À La Livraison : Les Caractéristiques Dimensionnelles Maximales (afin Qu'ils Puissent Passer La Porte D'accès Au Local) Des Fours Sont Les Suivantes : 195 Cm De Large X 215 Cm De Haut. En Outre, Une Visite Des Lieux Peut Être Organisée Afin De Mieux Cerner Les Moyens Nécessaires À La Livraison. Pour Ce Faire, Veuillez Contacter : Monsieur Closset Raphaël Tel :04-366-35-32 Email : Raphael.closset@uliege.be  

Details: The Los Angeles District, U.s. Army Corps Of Engineers Is Seeking To Lease A Minimum Of 1200 Net/usable To A Maximum Of 1600 Gross/rentable Square Feet (gross Square Feet To Include Any Common Area Factor), Of Existing Class A Or B Retail Space, In The Santa Maria, Ca, Within The Defined Delineated Area (da) Boundaries Below: north -- Thompson Ave/wilson Rd Off 101 North Freeway south -- Clarke Rd (orcutt, Ca) east – Dominion Road west – Calle Cesar E Chavez ( Guadalupe, Ca) the Government’s Desire Is For Afull-service Lease Of Retail Space For A Navy Recruiting Office For A Term Not To Exceed Five (5) Years With Government Terminationrights. offered Space Must Meet Government Requirements Per The Terms Of The Government Lease.interested Respondents May Include Building Owners And Representatives With The Exclusive Right To Represent Building Owners. Representatives Of Building Owners Must Include The Exclusivity Agreement, Representation Letter, Listing Contract Or Other Executed Agreement Granting The Exclusive Right To Represent The Building Owner With Their Response To This Advertisement. adequate Mass Transit (buses, Trains, Rail Cars) For The Public Within Three Walking Blocks Is Highly Desired. required spaces Must Offer Both A Primary And A Secondary Point Of Ingress/egress. lighted, Non-exclusive Or Reserved On-site Parking For Four (4) Marked Government Owned Vehicles Must Be Provided For On 24 Hours 7 Days A Week Basis. Additional Lighted Parking Must Be Available During Business Hours, Weekends And Holidays, For Approximately 5 Employee Vehicles And Visitors/recruit Candidate Parking. must Use The Government Lease. the Military Services Shall Have The Right To Use Space Beyond Normal Working Hours And, If Required, On Saturdays, Sundays, And Federal Holidays. This Includes The Use Of Elevators, Lights, Toilet Facilities, And, If Necessary, Heating And Air Conditioning. armed Forces Recruiting Facilities Are Only Located In Defined Geographical Areas That Contain Businesses And Other Establishments That Are Of A Compatible Nature. Under No Circumstances Will Be These Facilities To Be In Areas Where Sexually Oriented Businesses, Bars, Nightclubs, Liquor Stores, Smoke Shops, Marijuana Dispensaries Etc. Or Other Business That Produce Injurious Odors Detectable With The Leased Spaces. Placement Near These Establishments Can Hamper Overall Production Of The Office Or Cause Concern For The Safety Of The Personnel Stationed There And Their Visitors. lessors Are Required To Be Registered And Active In Www.sam.gov Prior To The Deadline For Final Offer Submission. proposals Are Due No Later Than 5:00 Pm (pst) On March 05, 2025. responses Should Include: building Name And Address as-built Floor Plan Drawing digital Photo Of Street View Of Property area (boma Rentable Square Feet & Boma Usable Square Feet) rental Rate Per Square Foot Rentable Space To Include (cam, Taxes And Insurance) common Area Factor(s) For Available Space, If Applicable following Are The Factors That Will Be Considered When Evaluating Bids/offers: 1. Location 2. Ability To Meet All Construction Specifications, Security Measures And Lease Requirements 3. Complete Initial And Final Offers Must Be Received By Defined Deadline 4. Competitive Costs In The Best Interest Of The Government 5. Qualitative Ratings By Client For Mission additional Notes: three (3) Construction Bids For The Build-out Are Requested. After A Bid Is Accepted, No Change Orders Are Authorized, So Bids Need To Be Accurate And Complete (including All Taxes And Fees). Special Attention Should Be Given To Security Requirements (video Entry Control System, Closed Circuit Television System And Video Recording, Dual Roller Shades On Exterior Windows, Fixed Panel Shade On Exterior Entry Door And Peep Hole In Secondary Exit, Perforated Window Wrap), Fragmentation Film On Exterior Windows/glass Doors, Telecommunication Wiring Requirements, Addition Of Water Fountain, Signage, Paint, Wall Graphics, Phone Jacks, Electrical Outlets, And Spec'd Carpet Squares. These Are Items That Can Add A Significant Cost And May Be Overlooked In The Bid Process; However, All Items In The Specifications Need To Be Followed, Even If Code Does Not Require The Item (i.e., Smoke Detectors, Fire Extinguishers, Etc.). bids Shall Include Any Tear Down/haul Away Expenses. the Attached Floor Plan Is To Be Used As A Generalized Idea And Reference Tool For Proximity Of Amount Of Useable Space This Location Will Require For Build Out In Both Office Space And Common Area Space. Submitted Floor Plans Must Meet The Space Requirements As Designated On Attached Example. it Is Mandatory That Janitorial Services Be Included In The Lease (lessor Responsible For Contracting These Services). Be Sure To Review The Attached Janitorial Guidance And Ensure The Costs Of These Services Are Included On The Rental Proposal Works contact interested Parties May Contact Jaran Panichkul At The U.s. Army Corps Of Engineers, Southern California, Real Estate Office, 915 Wilshire Blvd Suite 1109, Los Angeles, 90017; Jaran.t.panichkul@usace.army.mil,no Later Than 5:00 Pm Pst On 05 March 2025.

Details: The Los Angeles District, U.s. Army Corps Of Engineers Is Seeking To Lease A Minimum Of 4300 - 5000 Net/usable To A Maximum Of Gross/rentable Square Feet (gross Square Feet To Include Any Common Area Factor), Of Existing Class A Or B Retail Space, In The Oxnard, Ca, Within The Defined Delineated Area (da) Boundaries Below: north -- Town Center Drive south -- Gonzales Road east –ventura Blvd west – N Rose Ave. the Government’s Desire Is For Afull-service Lease Of Retail Space For An Armed Forces Career Center For A Term Not To Exceed Five (5) Years With Government Terminationrights. offered Space Must Meet Government Requirements Per The Terms Of The Government Lease.interested Respondents May Include Building Owners And Representatives With The Exclusive Right To Represent Building Owners. Representatives Of Building Owners Must Include The Exclusivity Agreement, Representation Letter, Listing Contract Or Other Executed Agreement Granting The Exclusive Right To Represent The Building Owner With Their Response To This Advertisement. adequate Mass Transit (buses, Trains, Rail Cars) For The Public Within Three Walking Blocks Is Highly Desired. required spaces Must Offer Both A Primary And A Secondary Point Of Ingress/egress. lighted, Non-exclusive Or Reserved On-site Parking For Four 5 Marked Government Owned Vehicles Must Be Provided For On 24 Hours 7 Days A Week Basis. Additional Lighted Parking Must Be Available During Business Hours, Weekends And Holidays, For Approximately 5 Employee Vehicles And Visitors/recruit Candidate Parking. must Use The Government Lease. the Military Services Shall Have The Right To Use Space Beyond Normal Working Hours And, If Required, On Saturdays, Sundays, And Federal Holidays. This Includes The Use Of Elevators, Lights, Toilet Facilities, And, If Necessary, Heating And Air Conditioning. armed Forces Recruiting Facilities Are Only Located In Defined Geographical Areas That Contain Businesses And Other Establishments That Are Of A Compatible Nature. Under No Circumstances Will Be These Facilities To Be In Areas Where Sexually Oriented Businesses, Bars, Nightclubs, Liquor Stores, Smoke Shops, Marijuana Dispensaries Etc. Or Other Business That Produce Injurious Odors Detectable With The Leased Spaces. Placement Near These Establishments Can Hamper Overall Production Of The Office Or Cause Concern For The Safety Of The Personnel Stationed There And Their Visitors. lessors Are Required To Be Registered And Active In Www.sam.gov Prior To The Deadline For Final Offer Submission. proposals Are Due No Later Than 5:00 Pm (pst) On March 06, 2025. responses Should Include: building Name And Address as-built Floor Plan Drawing digital Photo Of Street View Of Property area (boma Rentable Square Feet & Boma Usable Square Feet) rental Rate Per Square Foot Rentable Space To Include (cam, Taxes And Insurance) common Area Factor(s) For Available Space, If Applicable following Are The Factors That Will Be Considered When Evaluating Bids/offers: 1. Location 2. Ability To Meet All Construction Specifications, Security Measures And Lease Requirements 3. Complete Initial And Final Offers Must Be Received By Defined Deadline 4. Competitive Costs In The Best Interest Of The Government 5. Qualitative Ratings By Client For Mission additional Notes: three (3) Construction Bids For The Build-out Are Requested. After A Bid Is Accepted, No Change Orders Are Authorized, So Bids Need To Be Accurate And Complete (including All Taxes And Fees). Special Attention Should Be Given To Security Requirements (video Entry Control System, Closed Circuit Television System And Video Recording, Dual Roller Shades On Exterior Windows, Fixed Panel Shade On Exterior Entry Door And Peep Hole In Secondary Exit, Perforated Window Wrap), Fragmentation Film On Exterior Windows/glass Doors, Telecommunication Wiring Requirements, Addition Of Water Fountain, Signage, Paint, Wall Graphics, Phone Jacks, Electrical Outlets, And Spec'd Carpet Squares. These Are Items That Can Add A Significant Cost And May Be Overlooked In The Bid Process; However, All Items In The Specifications Need To Be Followed, Even If Code Does Not Require The Item (i.e., Smoke Detectors, Fire Extinguishers, Etc.). bids Shall Include Any Tear Down/haul Away Expenses. the Attached Floor Plan Is To Be Used As A Generalized Idea And Reference Tool For Proximity Of Amount Of Useable Space This Location Will Require For Build Out In Both Office Space And Common Area Space. Submitted Floor Plans Must Meet The Space Requirements As Designated On Attached Example. it Is Mandatory That Janitorial Services Be Included In The Lease (lessor Responsible For Contracting These Services). Be Sure To Review The Attached Janitorial Guidance And Ensure The Costs Of These Services Are Included On The Rental Proposal Works contact interested Parties May Contact Jaran Panichkul At The U.s. Army Corps Of Engineers, Los Angeles District, Real Estate Office, 915 Wilshire Blvd, Los Angeles, Ca 90017; 805-598-3903; Jaran.t.panichkul@usace.army.mil,no Later Than 05:00 P.m. On 03/06/2025.

Details: Description For: Motorpool Office 2 Pcs Portable Air Compressor For: Toyota Innova With Plate Number Sgn-213 1 Pc Fuel Filter 10 Pcs Auto Bulb For: Toyota Hilux With Plate Number Sfu-568 1 Pc 5" Car Fan 24v 1 Pc Wiper Blade 22" 1 Pc Wiper Blade 18" 1 Pc Wiper Arm 22" 1 Pc Twin Fan 12v For: Isuzu Truck With Plate Number Sdd-746 3 Pail Engine Oil (20 Liters Per Pail) 4 Pcs Hose Clip 3/8 4 Pcs Hose Clip 5/8 8 Ltr Brake Fluid 1 Pc Oil Filter 1 Pc Fuel Filter 2 Pail Atf 20 Liters/pail 1 Pc Air Cleaner 13 Ft Steel Tube 9 Ft Fuel Hose 1 Pc Battery Cable 2 Pcs Beta Gray 1 Pc Pinion Oil Seal 1 Pc Release Bearing 1 Pc Clutch Disc 1 Pc Clutch Pressure Assembly For: Toyota Innova With Plate Number Shn-367 1 Set Brake Pad 1 Pc Drive Belt 1 Pc Timing Belt For: Toyota Innova With Plate Number Shn-367 1 Set Brake Pad 1 Pc Drive Belt 1 Pc Timing Belt For: Toyota Hilux With Plate Number Shn-377 1 Set Repair Kit 2 Pcs Oil Seal 1 Ltr Oil 1 Pc Silicon Gasket For: Toyota Innova With Plate Number Shm-388 1 Pc Wiper Blade 18" 1 Pc Wiper Blade 22" For: Toyota Hilux With Plate Number Sgn-271 2 Set Horn 1 Pair Epoxy 1 Set Brake Shoе 2 Ltr Brake Fluid 1 Pc Brake Cleaner 1 Pc Wd-40 Big 1 Pc Center Sleeve 1 Pc Radiator Hose (upper) 2 Pcs Hose Clip 2" (h.d) 2 Pcs Hose Clip 1" For: Toyota Hiace With Plate Number 080109 2 Pcs Air Cleaner For: Toyota Hiace With Plate Number Sgn-197 2 Pcs Belt Dressing For: Toyota Fortuner With Plate Number Sgm-890 1 Pc Automotive Battery 3smf 22 Gal Engine Oil-fully Synthetic W-w-w-w-w-w-w-w-w-w-w-w-w-w

Details: Description Gas Fryer 1t1b - 2 Units @ 51,700.00 Air Pressure: 2800 Mpa / Power: Gas Fired / Domension: 345x585x1025 Mm / Capacity:18l Electric Fryer 2t2b 8l-2 - 2 Units @ 11,000.00 Dimension: 480x410x345 Mm / Capacity: 8l / Voltage:220v 50hz / Power: 3.25 + 3.25 Kw Continuous Band Sealer 900lw - 1 Unit @ 31,100.00 Voltage: 220v 50/60hz / Pump Power: 0.5kw / Speed: 1-12m/min / Holding Capacity:max 5kg / Function:seal / Dimension:760*350*660 Mm / Weight: 26kg Weighing Scale Flat Pan - 1 Unit @ 10,000.00 Max Capacity (kg):120 Graduation / Readability (kg): 0.5 / Type: Mechanical Dimensions (mm): 410 X 410 X 390 / Package Weight (kg): 11.84 / Information: Extra Large Body Flat Plate (blue) Mechanical In Mild Steel / Stainless Top Plate Drying Tray Racks 6 Layers - 1 Unit @ 19,700.00 Stainless Steel Tray Racks Car 6-layer Square Tube With Trolley / Stainless / Style: Square Tube Thickened Version / Number: Holds 6 Plates / Material: Thickened Stainless Steel 201 / Ceiling Height: 7.5 Cm / Oven Size: 40x60cm / Installation: Require Self Assembly / Sizes: 60cm Width / 73cm Height / 46.5 Cm Length Tray For Banana Chips / Stainless Tray 60x40 - 6 Units @ 900.00 Product Material: Aluminum / 201 / Product Size: 40cm *60cm *4.8cm / Thickness: 1.0 Pure Aluminum / Weight: 1 Kg / Product Features: Easy To Clean, High Temperature Resistant Stainless Steel Table With 2 Layer / Kitchen Double Decker Table High-capacity Furniture Table Stainless Table - 1 Unit @ 19,700.00 Product Name; 304 Stainless Steel Workbench / Color:silver / Weight; About 100kg-500kg / Shipping Method:bulk / Customized Size: 50cm Width / 150cm Length / 13cm /80cm Height / Ss304 Banana Chipping Machine - 1 Unit @ 88,700.00 Chipping Machine / Model: Stainless With Conveyor Analog Controller / Capacity: 50-100 Kg Per Hour / Thinkness: 1.5-10 Mm / Food Grade Conveyor