Cars Tenders

Details: Description 1. The Dpwh-mp1stdeo, Through The Government Of The Philippines Intends To Apply The Sum Of Php 4,899,999.10 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25pi0053 - Convergence And Special Support Program- Construction/ Improvement Of Access Roads Leading To Trades, Industries And Economic Zones (road Leveraging Linkages For Industry And Trade Infrastructure Program - Roll-it): Bila-bagnen Oriente Road In Support Of Agribusiness, Coffee And Food Processing Industries, Bauko, Mountain Province. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh-mp1stdeo Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 45 Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From Dpwh-mp1stdeo And Inspect The Bidding Documents At The Address Given Below From Monday To Friday At 8:00 Am To 5:00 Pm Except On Declared Non-working Holidays: Office Of The Procurement Staff Dpwh-mp1stdeo Bontoc, Mountain Province, Cordillera Administrative Region 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 8, 2025 – January 28, 2025 9:30 Am From The Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 5,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person Or Through Electronic Means. 6. The Dpwh-mp1stdeo Will Hold A Pre-bid Conference On January 15, 2025 10:00 Am At The Office Of The Procurement Staff, Dpwh-mp1stdeo, Bontoc, Mountain Province, Cordillera Administrative Region, And/or Through Livestreaming Via Dpwh Mountain Province First Deo – Bac Facebook Page Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address As Indicated Below, (ii) Online Or Electronic Submission As Indicated Below, Or (iii) Both On Or Before January 28, 2025 10:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On January 28, 2025 10:00 Am At The Given Address Below And/or Through Livestreaming Via Dpwh Mountain Province First Deo – Bac Facebook Page. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. If At The Time Of Post-qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b)(ii)(c) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject Of The Bid. 11. The Dpwh-mp1stdeo Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Janet A. Valencerina Admin. Officer V / Bac Chairperson Dpwh-mountain Province 1st District Engineering Office Bontoc, Mountain Province, Cordillera Administrative Region E-mail: Bac_mpdeo@yahoo.com Cp No.: 0920-637-7901 Franklin M. Kabluyen Engineer Iii / Head-procurement Unit Dpwh-mountain Province 1st District Engineering Office Bontoc, Mountain Province, Cordillera Administrative Region E-mail: Mpdeo_car@yahoo.com Cp No.: 0912-467-5680 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph, Www.dpwh.gov.ph For Online Bid Submission: Not Applicable

Details: Description Mswdo Daycare Worker's Capacity Building 30 Pax Lunch With Two Snacks (am And Pm) Consultation Dialogue Of Child Development Workers And Pre-elem Teachers On Eccd Program 23 Pax Lunch With Two Snacks (am And Pm) Convention Of Minors For The Purpose Of Consultation 23 Pax Lunch With Two Snacks (am And Pm) Support In The Implementation Of Aruga And Kalinga Program 57 Pax Lunch With Two Snacks (am And Pm) Seminar Workshop For Bcpc And Mcpc Members On Different Children And Women Laws 57 Pax Lunch With Two Snacks (am And Pm) Capacity Building For Women Organization 47 Pax Lunch With Two Snacks (am And Pm) Support To Pyap 300 Pax Lunch With Two Snacks (am And Pm) Training Workshop On School Child Protection Mechanism 59 Pax Lunch With Two Snacks (am And Pm) Children's Month Celebration 47 Pax Lunch With Two Snacks (am And Pm) Support To Women's Month Celebration 47 Pax Lunch With Two Snacks (am And Pm) Senior Citizen's Week Celebration 59 Pax Lunch With Two Snacks (am And Pm) Year End Senior Citizen Consultative Meeting 66 Pax Lunch With Two Snacks (am And Pm) Autism Consciousness Week Celebration 50 Pax Lunch With Two Snacks (am And Pm) Support To Annual Lgbtqia Pride Month Celebration 38 Pax Lunch With Two Snacks (am And Pm) Observance Of 18 Day Campaign To End Violence Against Women And Their Children 47 Pax Lunch With Two Snacks (am And Pm) Support To Sustainable Livelihood Program (slp) 50 Pax Lunch With Two Snacks (am And Pm) For 2 Days Pantawid Pamilyang Pilipino Program (4ps) 50 Pax Lunch With Two Snacks (am And Pm) For 2 Days Conduct Pes, Rps For Child Development Learner Parents And Car/cicl 47 Pax Lunch With Two Snacks (am And Pm) Quarterly Conference And Consultation For Senior Citizen Federation 66 Pax Snacks Pwd Week Celebration 66 Pax Snacks Observance Of National Internet Safer Day For Children 133 Pax Snacks Girl Child Week Celebration 66 Pax Snacks Quarterly Conference And Consultation Of Lcpc And Lcat Vawc And Sustaining Of Bcpcs Functionality 100 Pax Snacks Mho Basic Bhw Training Course 39 Pax Lunch With Two Snacks (am And Pm) For 3 Days Performance Implementation Review 23 Pax Lunch With Two Snacks (am And Pm) Buntis Congress Activity 20 Pax Lunch With Two Snacks (am And Pm) Mass Chest X-ray 15 Pax Lunch With Two Snacks (am And Pm) Nutrition Month Celebration 25 Pax Lunch With Two Snacks (am And Pm) Basic Bnap/bns Training 14 Pax Lunch With Two Snacks (am And Pm) For 3 Days Blood Letting Activities 54 Pax Lunch With Two Snacks (am And Pm) One Day Operation Tuli 14 Pax Lunch With Two Snacks (am And Pm) Cbdrp Aftercare Intervention 35 Pax Lunch With Two Snacks (am And Pm) Cbdrp Aftercare Intervention (early Recovery) 35 Pax Lunch With Two Snacks (am And Pm) Cbdrp Graduation Ceremony 23 Pax Lunch With Two Snacks (am And Pm) Mpdo Cbms 70 Pax 1 Meal, 2 Snacks For 1 Day Bfp Fire Prevention Month Activity 80 Pax Snacks Oplan Ligtas Na Pamayanan Activity Target Brgy 1 25 Pax Day 1 - 1 Meal And 1 Snack 18 Pax Day 2 - 1 Snack Oplan Ligtas Na Pamayanan Activity Target Brgy 2 25 Pax Day 1 - 1 Meal And 1 Snack 18 Pax Day 2 - 1 Snack Pnp Barangay Tanod Skills Enhancement Training 86 Pax 1 Meal And 1 Snack Badac Strengthening 86 Pax 1 Meal And 1 Snack Cbdrp Workshop 74 Pax 1 Meal Drug Free Workplace Policy (snacks) 66 Pax Snacks Lydo Sangguniang Kabataan And Lydc Mandatory Training 72 Pax 2 Meals And 2 Snacks Advanced Capacity Building For Peer-to-peer Mental Health And Psychosocial Support Services 40 Pax 1 Meal And 2 Snacks Support To Linggo Ng Kabataan 85 Pax 2 Meal And 2 Snacks Youth Participation In Child Protection Training (pops) 30 Pax 3 Meal And 2 Snacks Peso Dole/owwa Activities 200 Pax Snacks Menro Solid Waste Management Program 66 Pax 1 Meal And 2 Snacks Forest Management Program 66 Pax 1 Meal And 2 Snacks Tourism Cultural Mapping 14 Pax 1 Meal And 2 Snacks For 2 Days Omm Cdp-ela Training 50 Pax 1 Meal And 2 Snacks For 2 Days

Details: Description 1. The Dpwh-mp1stdeo, Through The Government Of The Philippines Intends To Apply The Sum Of Php 8,859,199.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25pi0028 - Organizational Outcome 1: Ensure Safe And Reliable National Road System - Asset Preservation Program - Rehabilitation/ Reconstruction Of Roads With Slips, Slope Collapse, And Landslide - Secondary Roads - Mt. Prov-cagayan Via Tabuk-enrile Rd - K0406 + 1001 - K0407 + 052, K0410 + 115 - K0410 + 288, K0410 + 509 - K0410 + 629. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh-mp1stdeo Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 119 Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From Dpwh-mp1stdeo And Inspect The Bidding Documents At The Address Given Below From Monday To Friday At 8:00 Am To 5:00 Pm Except On Declared Non-working Holidays: Office Of The Procurement Staff Dpwh-mp1stdeo Bontoc, Mountain Province, Cordillera Administrative Region 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 9, 2025 – January 28, 2025 9:30 Am From The Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 10,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person Or Through Electronic Means. 6. The Dpwh-mp1stdeo Will Hold A Pre-bid Conference On January 16, 2025 10:00 Am At The Office Of The Procurement Staff, Dpwh-mp1stdeo, Bontoc, Mountain Province, Cordillera Administrative Region, And/or Through Livestreaming Via Dpwh Mountain Province First Deo – Bac Facebook Page Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address As Indicated Below, (ii) Online Or Electronic Submission As Indicated Below, Or (iii) Both On Or Before January 28, 2025 10:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On January 28, 2025 10:00 Am At The Given Address Below And/or Through Livestreaming Via Dpwh Mountain Province First Deo – Bac Facebook Page. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. If At The Time Of Post-qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b)(ii)(c) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject Of The Bid. 11. The Dpwh-mp1stdeo Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Janet A. Valencerina Admin. Officer V / Bac Chairperson Dpwh-mountain Province 1st District Engineering Office Bontoc, Mountain Province, Cordillera Administrative Region E-mail: Bac_mpdeo@yahoo.com Cp No.: 0920-637-7901 Franklin M. Kabluyen Engineer Iii / Head-procurement Unit Dpwh-mountain Province 1st District Engineering Office Bontoc, Mountain Province, Cordillera Administrative Region E-mail: Mpdeo_car@yahoo.com Cp No.: 0912-467-5680 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph, Www.dpwh.gov.ph For Online Bid Submission: Not Applicable

Details: Description 1. The Dpwh-mp1stdeo, Through The Government Of The Philippines Intends To Apply The Sum Of Php 4,949,998.90 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 25pi0057 - Convergence And Special Support Program - Basic Infrastructure Program (bip) - Bip-access Roads And/or Bridges From The National Roads Connecting To Indigenous People (ip) Communities - Construction Of Road, Barangay Maligcong, Bontoc, Mountain Province. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh-mp1stdeo Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required 45 Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From Dpwh-mp1stdeo And Inspect The Bidding Documents At The Address Given Below From Monday To Friday At 8:00 Am To 5:00 Pm Except On Declared Non-working Holidays: Office Of The Procurement Staff Dpwh-mp1stdeo Bontoc, Mountain Province, Cordillera Administrative Region 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On January 8, 2025 – January 28, 2025 9:30 Am From The Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 5,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person Or Through Electronic Means. 6. The Dpwh-mp1stdeo Will Hold A Pre-bid Conference On January 15, 2025 10:00 Am At The Office Of The Procurement Staff, Dpwh-mp1stdeo, Bontoc, Mountain Province, Cordillera Administrative Region, And/or Through Livestreaming Via Dpwh Mountain Province First Deo – Bac Facebook Page Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address As Indicated Below, (ii) Online Or Electronic Submission As Indicated Below, Or (iii) Both On Or Before January 28, 2025 10:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On January 28, 2025 10:00 Am At The Given Address Below And/or Through Livestreaming Via Dpwh Mountain Province First Deo – Bac Facebook Page. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. If At The Time Of Post-qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b)(ii)(c) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject Of The Bid. 11. The Dpwh-mp1stdeo Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Janet A. Valencerina Admin. Officer V / Bac Chairperson Dpwh-mountain Province 1st District Engineering Office Bontoc, Mountain Province, Cordillera Administrative Region E-mail: Bac_mpdeo@yahoo.com Cp No.: 0920-637-7901 Franklin M. Kabluyen Engineer Iii / Head-procurement Unit Dpwh-mountain Province 1st District Engineering Office Bontoc, Mountain Province, Cordillera Administrative Region E-mail: Mpdeo_car@yahoo.com Cp No.: 09124675680 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph, Www.dpwh.gov.ph For Online Bid Submission: Not Applicable

Details: Title: Neuville-sur-saône : Mission De Maîtrise D'oeuvre Pour La Rénovation Du Pont Bow-string Et La Création D'une Passerelle Modes Actifs Entre Neuville-sur-saône Et Albigny-sur-saône description: Le Pont Actuel Permet De Relier Les Villes De Neuville Et Albigny, Il A Été Construit En 1931 En Remplacement De L'ouvrage D'origine Datant De 1831 (situé En Amont). Le Pont D'albigny-neuville Est Le Seul Pont De Type Bow-string En Béton Armé De L'agglomération Lyonnaise. Cet Ouvrage D'art Est Composé De Cinq Travées : Les Trois Travées Principales Sont De Type Bow-string Et Les Deux Travées Latérales D'accès Sont Des Ponts-à-poutres Multiples Sous Chaussée. La Travée Centrale A Été Dynamitée En Septembre 1944 Et Reconstruite À L'identique Après La Guerre. La Structure Connait Des Désordres Structurels Évolutifs Sur Des Organes Essentiels (arcs, Suspentes, Tablier, Appareils D'appui, Culées), Avec Un État De Fort Endommagement Dû À Des Réactions Généralisées De Gonflement Interne Du Béton. Les Corbeaux Et Les Poutres De Rives Situées Sous La Partie En Encorbellement Sont Les Points Les Plus Critiques De L'ouvrage. Il A Été Classé En 3 (note Qoa) Lors De La Dernière Idp. L'opération Consiste En La Réparation De L'ouvrage Routier Actuel Et Accolé À Celui-ci À L'amont La Création D'un Ouvrage Dédié Aux Modes Actifs : Piétons Et Cycles. La Réparation De L'ouvrage Existant Et La Création D'une Nouvelle Passerelle Font Partie Intégrante D'un Seul Et Même Projet Qui Vise Dans Un Premier Temps À Rétablir La Pérennité De L'ouvrage Existant Mais A Également Pour Objectif D'équilibrer Les Usages Au Sein De L'espace Public En Promouvant Les Modes Actifs. Cet Ouvrage Doit Permettre La Sécurisation De La Traversée Piétonne Et Cycles. Il Sera Réalisé À L'amont Immédiat Du Pont Actuel Et Devra Dégager Une Largeur Utile De 3,00 Mètres Pour Les Piétons Et De 3,00 Mètres Pour Les Cycles. Toute Proposition De Dimensionnement Inférieur Aux Valeurs Cibles Devra Être Justifiée Et Validée Par Les Instances Techniques Et Politiques Référentes Du Projet. Il Est À Noter Que La Surlargeur Créée Par Cette Nouvelle Passerelle Ne Pourra Être Supérieure À 5 Mètres Au-delà De L'ouvrage Existant. Cette Opération S'inscrit Dans Le Cadre Plus Général Des Différents Projets D'aménagement Du Secteur, Avec Notamment : - La Requalification Des Quais De Neuville (entrée Nord) ; - L'aménagement De La Voie Lyonnaise N° 3 Nord ; - La Piétonnisation De La Section Ouest De La Rue Victor Hugo ; - Le Renouvellement De La Conduite D'eau Potable Traversant L'ouvrage Par Edlg. Le Périmètre Géographique De L'opération Comprend L'ouvrage De Neuville Sur Saône Portant La Route Départementale D16 Et L'emprise De La Future Passerelle Accolée Au Pont. Le Périmètre Englobe Également Les Accès Immédiats À L'ouvrage (murs Des Culées, Intégrations Dans Les Giratoires, Raccordement Au Quai Bas Côté Neuville, Éclairage, Signalisation, Etc.). Ce Projet Devra Obtenir La Validation Des Architectes Des Bâtiments De France Car Le Pont Est Situé Dans Un Périmètre De Monument Historique. Lors Des Études De Faisabilité, Un Diagnostic Patrimonial De L'ouvrage Et Du Val De Saône A Été Mené. Ces Éléments Seront À Prendre En Compte Par La Maîtrise D'oeuvre

Description: Public tender (service) Investor selection process for the Homberg (Efze) clinic area In 2020, the city of Homberg (Efze) acquired the site of the former Asklepios or district clinic in order to develop it into a new, modern urban quarter. Reliable and experienced partners are needed to implement this project. To this end, the political bodies of the city of Homberg (Efze) have decided to initially sell the areas built up with the former ward house and the former nurses' residence of the old district clinic to suitable investors. It was also recommended that the existing buildings of the clinic, the former ward building including the atrium extension and the former nurses' residence, be retained as far as possible. The remaining buildings will be demolished. The open spaces created in this way will also be sold as the project progresses. Here, developers and construction groups will be given the opportunity to realize various types of residential projects. Concept tender The investors will be selected as part of concept tenders. A characteristic of a concept tender is that the investor is not selected based on the highest bid, but primarily on his concept for the project implementation. The quality of the submitted concepts will be assessed on the basis of an evaluation matrix that is drawn up before the start of the process and made known to interested parties. The evaluation matrix contains criteria for evaluating the concepts. The criteria reflect which developments are important both for the property/area in question and for the city itself and must or should be considered accordingly. Since not all criteria are equally important, different weightings are defined in the evaluation matrix for the various criteria for the subsequent evaluation of the concepts. This ensures in a transparent manner that the bidder who offers the best concept is selected as the investor. The concept is bindingly agreed upon with the investor in the purchase contract. Deadlines for the implementation of the concept are also regulated in the purchase contract. This creates a framework for the development of the area in question which, if well planned, has a positive effect on the urban development of the municipality. Concept tenders are now being used more and more frequently by German cities as an instrument to be able to control urban development in a targeted manner. Development goals The city of Homberg (efze) has set the following goals for the development of the new residential quarter: - Creation of a lively, green and traffic-safe residential quarter, - Mixture of the quarter with different types of construction and housing for families, senior citizens, young people, cross-generational and community groups, - Creation of a lively quarter center/quarter square in the sense of a quarter of short distances with a variety of additional uses (e.g. daycare center, hotel, medical facilities, fitness studio, services, office, social and cultural uses), - Appropriate building density and height development (approx. 2-3 floors + roof), - The public space of the quarter should primarily serve as a place for residents and employees to stay and should be equipped with economical development as a low-car quarter with an adapted parking space ratio, - Economical rainwater retention should be planned, - Green roofs and facades are desirable, - An energy supply close to the quarter is intended, - The ward block and the nurses' residence are to be retained. Process Firstly, the sub-areas with the existing buildings "ward block with atrium" and "nurses' residence" are to be marketed. These areas have been identified as key objects that are essential for successful district development. It is planned that at least the site of the former ward block with atrium extension will be sold in spring 2025. As soon as these sites have been successfully sold, the marketing of the remaining areas can begin. For the sale of the remaining sites, it is planned to carry out low-threshold concept tenders.

Details: Nsn: 5895-01-357-0739 p/n: 5188110-007 noun: Aibu application: F-16 repair Qualification Requirements qualification Requirement Cost Estimate estimate The Likely Cost For Testing And Evaluation Which Will Be Incurred By The Potential Offeror to Become Qualified. This Is A Requirement Of Far 9.202(a)(1)(ii) And 10usc2319(b)(3) (the following Categories May Not Apply In All Cases. The Product Engineer Should Identify The Costs applicable To The Project And Indicate N/a On All Sections That Do Not Apply.) total Cost Is section A. Shipping, If Required, Use Dd Form 1654, Evaluation Of Transportation Cost Factors To develop The Information. Refer Any Questions To The Procurement Contracting Officer For Cost estimation. section B. Dimensional/electronic Verification. Contact The Science/engineering Laboratory To obtain Cost Estimates (bids) For Tests Such As: a. Chemical b. Metallurgical (1) Destructive (2) Non-destructive c. Dimensional d. Electronic e. Mechanical f. Non-destructive Inspection section C. Nuclear Hardness [this Includes Cost Of Shock, Vibration, And Electro-magnetic Pulse (emp)]. Contact Systems Engineering Integration And Test Division For Hourly Rate. section D. Form, Fit, Function And Interface. Contact Your Organizational Production Management specialist (pms) To Obtain Information On The Same Or Similar Item Where Work Has Been Accomplished in The Past Using Afmc Form 206, Temporary Work Request. section E. Original Equipment Manufacturer (oem) Qualification Testing (if Required) a. Laboratory Costs (costs Are Directly Dependent On The Type Of Testing To Be Accomplished And The location And Duration Of The Testing. For Example, Landing Gear Laboratory Testing Is Normally accomplished On A Dynamometer And Costs Vary From $25,000 To $500,000 Depending On The Depth Of testing. Aircraft And Missile Testing Will Vary As The Requirement Dictates And The Cost Will Have to Be Identified By The Source Of Testing). b. Flight/data Reduction & Analysis Costs. section F. Travel By Contractor To Test Site (if Required) a. Lodging b. Per Diem c. Rental Cars d. Incidentals (verified) section G. Sar Package Development/evaluation Cost: A Potential New Source’s Development Of A source Approval (sar) Package May Cost As Much As: in Addition, The Cost Incurred For Government Evaluation Of Their Sar May Be As Much As: Evaluation cost May Be Born By The Government If It Is In The Best Interest Of The Government To Qualify alternate Sources. $23,300.00 $ 200.00 $ 7,000.00 $ 0.00 $500.00 $6,500.00 $15,000.00 $ 0.00 $ 0.00 $1,100.00 24 May 2024 Supporting Information repair Qualification Requirements nsn: 5895-01-357-0739 p/n: 5188110-007 noun: Aibu application: F-16 section C: 1. Qualification Requirements That Must Be Satisfied To Become A Qualified Source a. Prequalification Notice: The Offeror Shall Notify The Appropriate Government Small Business office Or, If Responding To A Solicitation, The Contracting Officer In The Appropriate Government contracting Office, Of Intent To Qualify As A Source For This Aibu. b. Facilities, Testing, And Inspection Capabilities: The Offeror Must Certify To The Government that They Have, Or Have Access To, The Required Facilities And Equipment To Repair, Inspect, Test, package, And Store The Item. The Offeror Shall Make Their Facilities, Equipment, Tooling, And personnel Available For Evaluation And Inspection By The Government. c. Data Verification: The Offeror Must Verify That They Have A Complete Data Package. This verification Must Include A Complete List Of All Procedures, Drawings, And Specifications, including Change Notices, In The Offeror’s Possession Including, At A Minimum Sci Technology, Inc (2j622) Drawing 5188110. The Offeror May Also Be Required To Produce Copies Of All Applicable procedures, Drawings, Or Specifications. d. Repair Process Verification: The Offeror Must Repair This Item To Conform To The Government requirements As Prescribed Within The Esa-approved Engineering/technical Data Package. The Offeror must Show Compliance With Unique Identification (uid) Requirements In Accordance With Dfars 211.274 as Prescribed Within The Esa-approved Engineering/technical Data Package. The Offeror Must Provide, at Their Own Expense, Data Showing The Results Of All Quality, Performance, And Environmental evaluations Conducted By The Offeror To Show Compliance With The Government Requirements As prescribed By 416th Scms/gueaa. The Offeror Shall Also Identify Its Sources For Materials And Its standards For Internally Used Processes. e. Test And Evaluation And/or Verification: The Offeror, At Their Own Expense, Shall Prepare And submit To 416th Scms/gueaa For Their Prior Approval, A Qualification Test Plan/procedure Detailing how They Intend To Verify Compliance With All Performance, Environmental, Mechanical, And Quality assurance Requirements Identified By Drawing 5188110. After Completion Of The Approved qualification Testing, The Offeror Shall Be Required To Submit A Complete Test Report Of The results To 416th Scms/gueaa For Their Review And Approval Prior To The Contract Award. The government Retains The Right To Exercise The Option To Inspect The Testing Processes, Including on-site Witnessing Of Any Or All Documented Testing. To Allow Accomplishing This, The Offeror Shall notify The Government At Least 30 Days In Advance Of The Occurrence Of Any Testing That Will Be used As A Basis For Qualification. The Offeror’s Facilities Shall Be Made Available For Government inspection During These Tests. f. Qualification Article Verification: The Offeror Must Provide, At Their Own Expense, A pre-contract Award Qualification Article For Evaluation By The Government. This Article Must Comply with All Of The Requirements Of Drawing 5188110. This Article Shall Be Subjected To A Form, Fit, and Function Evaluation To Demonstrate Compatibility With The Weapon System And To Evaluate The 24 May 2024 Section C 1/3 repair Qualification Requirements nsn: 5895-01-357-0739 p/n: 5188110-007 noun: Aibu application: F-16 repair Capability Of The Offeror. Offerors Will Be Notified Whether Or Not Their Qualification article Passed Or Failed The Required Qualification Testing Within 90 Days Of Submitting A Product for Qualification Testing. Note That Successful Completion Of The Qualification Testing Does Not guarantee Any Contract Award. If The Offeror Is Deemed Qualified And Awarded The Contract, A post-contract Award First Article Exhibit May Be Required To Verify Production Capability. g. Qualification Requirement Cost Estimate: Estimated Likely Costs For Testing And Evaluation, which Will Be Incurred By The Potential Offering Party To Become Qualified Are $23,300.00. h. Qualification Time Completion Estimate: It Is The Estimate Of The Engineering Support Activity that Completion Of This Qualification Effort Should Require 180 Days. This Is Based On Complexity of The Aibu And Other Factors. i. Qualification Time Limitation: An Offeror May Not Be Denied The Opportunity To Submit And Have considered An Offer For A Contract If The Offeror Can Demonstrate To The Satisfaction Of The contracting Officer That The Offeror (or Its Product) Meets These Standards For Qualification Or can Meet Them Before The Date Specified For Award Of The Contract. The Award Will Not Be Delayed To provide The Vendor With An Opportunity To Demonstrate Its Ability To Meet The Standards Specified in This Qualification Requirement. j. Evaluation Of Proposals Not Previously Qualified: The Offeror Must Be Fully Qualified In Order to Be Eligible For A Contract Award. Therefore, The Offeror Must Fulfill All Of The Requirements stated, In Writing, In The Qualification Requirement Before The Date Specified For Award Of The contract. Once All Requirements Are Met, The Offeror Will Be Listed As An Approved Repair Source for This Item. Approval, However, Does Not Guarantee Subsequent Contract Award. 24 May 2024 Section C 2/3 repair Qualification Requirements nsn: 5895-01-357-0739 p/n: 5188110-007 noun: Aibu application: F-16 2. Source Qualification Waiver Requirements sources Who Meet Any Of The Following Source Qualification Waiver Criteria (qwc) May Apply For A waiver Of All Or Part Of The Qualification Requirements. If A Waiver Is Granted And The Offeror Is awarded A Contract, The Offeror May Still Be Required To Provide A Post-contract Award First article Exhibit To Verify Production Capability: a. Qwc1: The Potential Source Submits Written Certification That The Articles Have Been Supplied to The Government Or Original Equipment Manufacturer (e.g., Dd Form 250, Material Inspection And receiving Report, Purchase Order Invoice, Etc). b. Qwc2: A Source Qualified To Provide An Assembly Is Usually Qualified To Provide Subassemblies, major Components, And Items Of That Assembly. c. Qwc3: A Source Qualified To Provide Earlier Dash Numbers Of A Basic P/n May Be Qualified To provide Other Dash Numbers Of That Same Basic P/n, Provided There Is No Increase In Complexity, criticality, Or Other Relevant Requirements. d. Qwc4: A Source Qualified To Provide A Similar Or Like Item Can Be Qualified To Provide The required Item. However, For Approval, The Engineering Authority Must Verify That There Is No increase In Complexity, Criticality, Or Other Requirements Over That Of The Similar Item. At A minimum, The Source Shall Provide A Complete Set Of Drawings For The Similar Item And Written proof, Such As Purchase Orders, Shipping Documents, Etc., To Show That The Similar Item Was provided To The Original Equipment Manufacturer Or Dod. e. Qwc5: A Source Previously Qualified To Provide An Item, But Which Has Been Purchased, Sold, merged, Absorbed, Reformed, Split, Etc., May Qualify If It Can Be Established That The qualification Is Currently With The Requester And That The Requester Has The Same Or Equivalent facilities, Tooling, Equipment, Personnel, And Utilizes The Original Forging, Castings, Etc., In the Repair Process. 24 May 2024 Section C 3/3

Details: Update: 04/27/2020 - Aoi #2 And #3 Have Been Added To This Notice. Please Reference Attachments For Information.  update: 2/25/2020  An Aoi Has Been Added To This Notice. Please Reference Attachments For Information.  section 1 – Introduction under The Authority Of 10 U.s.c. 2371b The Agility Prime Office Is Pursuing Prototype Projects From Nontraditional And Traditional Defense Contractors. These Projects Will Help The Government Assess The Transformative Vertical Flight Market And Vertical Takeoff And Landing (vtol) Technologies. This Effort Seeks To Establish A Collaborative Strategy With Industry And Investors That Accelerates Fielding Of The Most Promising Technologies For Savings And Utility To The Government, As Well As Potential Commercial Market Success. As These Systems Mature Toward Certified Commercial Operations, The Government Will Identify Opportunities For Early Adoption, With The Potential For Procurement And Fielding In The Next Three Years. the Core Technologies Of Interest Include Emerging Electric Vtol (evtol) And Urban/advanced Air Mobility (uam/aam) Aircraft, Although Alternatives Will Be Considered. These Aircraft May Incorporate Non-traditional Electric Or Hybrid Propulsion For Manned Or Optionally Manned Missions, With Onboard Pilot, Remote Pilot, Or Autonomous Control. Based On Emerging Commercial Trends, These Transformational Commercial Vehicles Are Typically Characterized By Employment Of Distributed Propulsion For Vertical Flight And Potential Use Of A Wing For Horizontal Flight, Along With Augmented Flight Control Systems, And High Levels Of Automation Or Autonomy. Besides Aircraft, This Effort Will Consider Similar Support To Enabling Technologies. during This Opening, The Government Intends To Test The Hypothesis That, Compared To Other Ground And Air Vehicles, These Aircraft Could Revolutionize Mobility Given: 1) Lower Maintenance Cost And Time, Through Mechanical Simplicity; 2) Improved Safety And Declining Personnel Demands, Using Autonomy; 3) Affordable Quantity, Based On Potential Mass Production; 4) Improved Acoustics, Employing Distributed Propulsion; And 5) Greater Flexibility And Reduced Infrastructure Needs, With Runway Independence. To Mitigate Risk, This Hypothesis Will Initially Be Tested Outside Of The Urban Environment In Scenarios That Could Potentially Open A Broad Public-use Market For Early Government Adoption Prior To Civil Certification In A Way That Accelerates Uam. Modularity Similar To A Satellite Bus Or Universal Serial Bus (usb) Could Enable Vast Use Cases. These Vehicles, Referred To As Orbs, Are Not Drones, Cars, Helicopters, Trucks, Airplanes, Motorcycles, Or Suvs, But Might Support Similar Missions. Given Their Flexibility, An Orb Could Act As An Organic Resupply Bus For Disaster Relief Teams, An Operational Readiness Bus For Improved Aircraft Availability, And An Open Requirements Bus For A Growing Diversity Of Missions. Orbs Could Enable Distributed Logistics, Sustainment, And Maneuver, With Particular Utility In Medical Evacuation, Firefighting, Civil And Military Disaster Relief, Installation And Border Security, Search And Rescue, And Humanitarian Operations. this Effort Expands On What Has Thus Far Been A Fruitful But Ad Hoc Engagement With Industry In This Sector Through The Following Path: 1) Requesting Details Regarding Planned Commercial Technologies And Markets; 2) Identifying Technologies That Are Likely To Result In Successful Prototypes; 3) Creating Opportunities For Collaborative Test Planning With The Potential Of Offering Test Assets And Expertise; 4) Leveraging This Campaign For Near-term Government Airworthiness Authorization As Well As Procurement Of Hardware, Software, Data, Or Services. The Intent Is To Accelerate Certification, While Also Assessing The Value Of Early Adoption And Fielding. Near-term Government Use-cases Could Occur Prior To Civil Certification And Might Provide Revenue And Data To Help Accelerate Even Broader Adoption And Technology Development. other Transaction For Prototype (otp) the United States Government (usg) May Choose To Award One Or More Otps As A Result Of This Opening, Depending On Evaluations And Funds Availability. In Such Cases, An Other Transaction For Prototype (otp) Agreement, In Accordance With 10 U.s Code 2371b, Will Then Be Negotiated For Prototype Project Delivery, Based On The Selected Solution Brief(s). If The Parties Intend, Upon Successful Completion Of The Prototype Project, To Enter Into A Follow-on Production Agreement Without Further Competition Using 2371b Authority, All Such Follow-on Production Agreement Terms Must Be Negotiated Prior To Execution Of, And Included Within, The Original Otp. Alternatively, Upon Successful Completion Of A Prototype Project Under The Original Otp, The Government And Successful Submitter May Subsequently Solicit And Negotiate Follow-on Far Based Contracts, Or Merely Negotiate Such Contracts, If Sufficient Justification Exists For Sole Sourcing. Follow-on Production Agreements May Include, But Are Not Limited To, Further Prototyping, In-kind Testing, Production, And Fielding As Launch Customer. the Otp Must Satisfy At Least One Of The Following Conditions: there Is At Least One Nontraditional Defense Contractor Or Nonprofit Research Institution Participating To A Significant Extent In The Prototype Project. all Significant Participants In The Transaction Other Than The Federal Government Are Small Businesses (including Small Businesses Participating In A Program Described Under Section 9 Of The Small Business Act (15 U.s.c. 638)) Or Nontraditional Defense Contractors. at Least One Third Of The Total Cost Of The Prototype Project Is To Be Paid Out Of Funds Provided By Sources Other Than Other Than The Federal Government. the Senior Procurement Executive For The Agency Determines In Writing That Exceptional Circumstances Justify The Use Of A Transaction That Provides For Innovative Business Arrangements Or Structures That Would Not Be Feasible Or Appropriate Under A Contract, Or Would Provide An Opportunity To Expand The Defense Supply Base In A Manner That Would Not Be Practical Or Feasible Under A Contract. opening Procedure And Participation this Opening Is A Competitive Solicitation, Continuously Open Until February 24 2025, Which Provides The Authority And Background For A Series Of Future Areas Of Interest (aois—see Definition In Section 2 Below) Requesting Solution Briefs And Proposals For New Solutions Or Potential New Capabilities That Fulfill Objectives, Close Capability Gaps, Or Provide Potential Technological Advancements In The Area Of Transformative Vertical Flight. The Government Reserves The Right To Award Other Transactions For Prototype (otp) Under The Authority Of 10 U.s.c. 2371b As A Result Of This Opening, If Deemed Appropriate, Based On Information Learned About This Field In The Course Of This Offering, Funds Availability, And In Accordance With The Procedures Herein, But The Government Is Not Required To Make Any Award, Unless The Government, In Its Sole Discretion, Deems Such Award Appropriate. “prototypes” Under This Legal Authority May Include Not Only Commercially Available Technologies Fueled By Commercial Or Strategic Investment That Result In Novel Applications For Defense Purposes, But Also, Among Other Things, Prototype Demonstrations, Agile Development Activities That Can Incrementally Improve Commercial Technologies That Then Become Available As Novel Defense Applications, Combinations Of These With Existing Government-owned Capabilities, Or Common Practices Newly Applied For Broad Defense Application(s). The Specific Level Of Support For Each Problem Statement Will Be Enumerated In The Aoi When Published. Please Note: This Opening Is Not Itself A Request For Solution Briefs Or Proposals. Aois Will Be Released In One Or More Separate Documents. otps Entered Into As A Result Of This Opening Shall Be Firm Fixed Price. besides Aircraft, These Aois Could Include But Would Not Be Limited To: Autonomy; Advanced Aircraft Materials And Manufacturing; Novel Acoustics Techniques; Subsystem, Aircraft, And Portfolio Design Tools; Rapid Mission Planning For Dense Air Environments And Logistics Efficiencies; Command And Control Of Air Vehicles; Robotic Landing Gear; Large Flotation Devices; Modular Payload Designs; Air Vehicle Data Networks And Rf Waveforms; Sense And Avoid Architectures, Algorithms, And Sensors; Electrical Power Storage, Generation, Charging; Alternative Onboard And Ground-based Electrical Power Generation; Distributed Electric Propulsion Control Techniques. this Opening Outlines The Processes And Procedures Whereby Solicit Solution Briefs May Be Submitted In Response To Aois. Aois Are Focused Topic Categories That Will Be Published Separately And Posted To Https://beta.sam.gov. All Solution Briefs Submitted In Response To An Aoi Will Be Considered To Be Made In Response To And Governed By This Opening. The Opening Outlines The Procedures To Submit A Response To An Aoi To Ensure A Competitive Process That Consists Of Three-phases: phase 1 Solution Briefs: Shall Be Submitted As Specified In Section 3.2 Of This Opening. phase 2 Company Engagement: Submitters With Solution Briefs That Satisfy The Aoi Will Be Evaluated And If Found To Be Of Merit May Be Invited To An Engagement Session, Subject To Availability Of Government Funds, Following The Instructions Provided In Section 3.3 Of This Opening, Or Schedule An Engagement With The Government To Provide Further Details On The Aoi. phase 3 Request For Prototype Proposal (rpp): Those Submitters Whose Solution Brief And/or Site Visit Is Found To Satisfy The Aoi, May, Subject To Availability Of Government Funds, Be Invited To Submit A Full Written Proposal Following The Instructions Provided In Section 3.4 Of This Opening For Potential Award Of An Otp For A Prototype Project (see Definition Below). the Government May Publish Aois At Any Time. Interested Submitters Should Check Https://beta.sam.gov For New Aoi Postings Under This Announcement. full Announcement Details On This Ico Are Located In The Attachments Section.   

Details: Modification #1 the Purpose Of This Modification Is Add The Complete Solicitation With The Clauses. Reference Attached File "1a 1305m325q0041 Prism With Clauses." ****** construction Project – Parking Lot Sealcoat Treatment And Striping In Accordance With The Statement Of Work. total Small Business Set-aside Per Far Part 13 Under The Simplified Acquisition Threshold (sat). Firm Fixed-price Contract Will Be Awarded Per The Trade-off Criteria In Car 1352.213-70. See The Attached Full Sf 18 Construction Clauses And Provisions With All Terms And Conditions Which All Vendors Must Be In Compliance With To Be Eligible For Award. New Contract, No Incumbent. bonding/loc Will Be Required Unless Your Quote Is Under $35k. period Of Performance work Completed No Later Than 240 Days Of Award, Quotes Must Provide Confirmation They Can Fulfill This Requirement. place Of Performance: pocatello, Id - 1945 Beechcraft Ave. Pocatello, Id 83204 las Vegas, Nv - 7851 Dean Martin Dr. Las Vegas, Nv 89139 the General Decision (gd) Id20240091, Posted On 02/16/2024 And Nv20240058, Posted On 09/20/2024 Will Be Incorporated And May Be Viewed At Www.sam.gov see The Attached Sf 18 Construction Template With All Terms And Conditions Which All Vendors Must Be In Compliance With To Be Eligible For Award. the Government Does Not Accept Responsibility For Non-receipt Of Quotes. It Is The Contractor’s Responsibility To Request And Receive A Confirmation Of The Quote Receipt. construction Purchase Order Clauses (fixed-price) updated Through Fac 2025-02 (jan 2025) far 36.204 Disclosure Of The Magnitude Of Construction Projects the Magnitude Is Between $25,000 And $100,000. utilization Of Fedconnect® For Contract Administration the Department Of Commerce Will Utilize The Fedconnect® Web Portal In Administering This Award. The Contractor Must Be Registered In Fedconnect® And Have Access To The Fedconnect® Website Located At Https://www.fedconnect.net/fedconnect/. For Assistance In Registering Or For Other Fedconnect® Questions Please Call The Fedconnect® Help Desk At (800) 899-6665 Or Email At Support@fedconnect.net. There Is No Charge For Registration In Or Use Of Fedconnect®. (end) car 1352.215-72 Inquiries (apr 2010) offerors Must Submit All Questions Concerning This Solicitation In Writing Via Email To Marilyn.herrera@noaa.gov. Questions Should Be Received No Later Than 4:00 P.m. On 01/17/2025. Any Responses To Questions Will Be Made In Writing, Without Identification Of The Questioner, And Will Be Included In An Amendment To The Solicitation. Even If Provided In Other Form, Only The Question Responses Included In The Amendment To The Solicitation Will Govern Performance Of The Contract. (end Of Clause) far 52.236-27 Site Visit (construction) (feb 1995) (a) The Clauses At 52.236-2, Differing Site Conditions, And 52.236-3, Site Investigations And Conditions Affecting The Work, Will Be Included In Any Contract Awarded As A Result Of This Solicitation. Accordingly, Offerors Or Quoters Are Urged And Expected To Inspect The Site Where The Work Will Be Performed. (b) Site Visits May Be Arranged During Normal Duty Hours By Contacting: name: Mike Kent email: Mike.kent@noaa.gov phone: 805-889-0645 (end Of Provision) a Site Visit Is Highly Recommended But Not Required. Vendors Are Urged And Expected To Inspect The Site Where Services Are To Be Performed And To Satisfy Themselves Regarding All General And Local Conditions That May Affect The Cost Of Contract Performance, To The Extent That The Information Is Reasonably Obtainable. In No Event Shall Failure To Inspect The Site Constitute Grounds For A Claim After Contract Award. car 1352.213-70 Evaluation Utilizing Simplified Acquisition Procedures (apr 2010) the Government Intends To Award A Trade-off, Firm Fixed Price Purchase Order Resulting From This Request For Quotation To The Responsible Offeror Whose Quotation Results In The Best Value To The Government, Considering Both Price And Non-price Factors With Payment Terms Of Net 30. the Evaluation Will Consider The Non-price Technical Solution (technical Approach, Capability, Experience And Past Performance) To Be Significantly More Important Than Price. However, As Quotes Are Determined To Be More Equal In The Non-price Evaluation Factors, Price Becomes More Important. the Government Reserves The Right Not To Award A Purchase Order Depending On The Quality Of The Quote(s) Submitted And The Availability Of Funds. the Government May Award To Other Than The Lowest-priced Vendor Or The Vendor With The Highest Technical Rating If The Contracting Officer Determines That To Do So Would Result In The Best Value To The Government. The Government Will Not Make An Award At A Significantly Higher Overall Price To Achieve Only Slightly Superior Performance Capability. the Following Factors Are Listed In Order Of Importance And Will Be Used To Evaluate Quotations: technical Approach And Capability. the Offeror’s Overall Technical Approach Will Be Evaluated To Assess The Government's Level Of Confidence In The Offeror’s Understanding Of, Approach To, And Ability To Successfully Perform The Requirements As Described In The Statement Of Work. A Detailed Technical Approach Write-up Describing How The Offeror Will Perform This Service Is Required To Be Submitted With The Quote Regardless Of Whether A Site Visit Was Made Or Not. The Technical Approach Write-up Must Not Be A Reiteration Of The Statement Of Work, But How Your Company Plans On Performing The Tasks Listed In The Attached Statement Of Work. (i.e. Performance Checklists, Anticipated Number Of Employees, Anticipated Hours At The Facility And/or Confirmation Of Supplies Being Provided, Etc.) experience. the Offeror's Background, Experience, And Qualifications (relevant Past Projects Performing Similar Services, Certifications Related To Current Requirement, Etc.) Will Be Assessed To Determine The Likelihood That The Offeror Can Successfully Perform The Contract Requirements. Offeror Must Have Knowledge And Experience With Parking Lot Sealcoat Treatment And Striping. past Performance. quote Shall Include At Least Two References From At Least Two Separate Contracts For Similar And Relevant Services Including The Name, Phone Number, Full Address, And E-mail Address Of The Reference To Demonstrate The Offeror’s Capability To Successfully Perform The Services Listed In The Statement Of Work. the Offeror Is Required To Fill Out Blocks 1-4 And Send The Attached Past Performance Questionnaire To The References Provided By The Offeror In Their Submission, And Email The Completed Survey Form Directly To (cs/co Email) By The Closing Date And Time Of This Solicitation. The Government Reserves The Right To Consider Past Performance Report Forms Received After The Due Date And Time Of The Solicitation, Past Performance Questionnaires Submitted From Previous Solicitations, And To Contact References For Verification Or Additional Information. the Offeror's Past Performance On Related Contracts Will Be Evaluated To Determine, As Appropriate, Successful Performance Of Contract Requirements, Quality And Timeliness Of Delivery Of Goods And Services, Cost Management, Communications Between Contracting Parties, Proactive Management And Customer Satisfaction. The Government Will Use Its Discretion To Determine The Sources Of Past Performance Information Used In The Evaluation, And The Information May Be Obtained From References Provided By The Offeror, The Agency’s Knowledge Of Offeror Performance, Other Government Agencies Or Commercial Entities, Or Past Performance Databases, And Will Be Based On Responsiveness, Quality, And Customer Services. offerors Lacking Relevant Past Performance History, Or For Whom Past Performance Information Is Either Not Available Or Has Not Been Submitted To The Government, Will Receive A Neutral Rating For Past Performance. price. the Quoted Prices Will Be Evaluated But Not Scored. The Government Will Evaluate The Price Quote For Completeness And Reasonableness In Relation To The Rfq Requirements. Quoted Prices Must Be Entirely Compatible With The Non-price Technical Solution. period Of Performance: Work Completed No Later Than 240 Days Of Award, Quotes Must Provide Confirmation They Can Fulfill This Requirement. warranty In Writing For Parts And Labor. (end Of Provision) car 1352.213-71 Instructions For Submitting Quotations Under The Simplified Acquisition Threshold—non-commercial (apr 2010) (a) North American Industry Classification System (naics) Code And Small Business Size Standard. The Naics Code And Small Business Size Standard For This Acquisition Is 238990 And $19.0m. (b) Submission Of Quotations. Submit Quotations To The Office Specified In This Solicitation At Or Before The Exact Time Specified In This Solicitation. At A Minimum, Quotations Must Show– (1) The Solicitation Number; (2) The Name, Address, And Telephone Number Of The Offeror; (3) Acknowledgment Of Solicitation Amendments; (4) A Technical Description Showing That The Offeror Can Supply The Requirements In The Specifications Or Statement Of Work In Sufficient Detail To Allow The Government To Evaluate The Quotation In Accordance With The Evaluation Factors Stated In The Solicitation. (5) Past Performance Information, When Included As An Evaluation Factor, To Include Recent And Relevant Contracts For The Same Or Similar Items And Reference Information (including Contract Numbers, Points Of Contact With Telephone Numbers And Other Relevant Information). (6) Price And Any Supporting Details For The Price, As Requested In The Solicitation. (c) Offerors Are Responsible For Submitting Quotations And Any Modifications Thereto, So As To Reach The Government Office Designated In The Solicitation By The Time Specified. The Offeror's Initial Quotation Should Contain The Offeror's Best Terms From A Price And Technical Standpoint. The Government May Reject Any Or All Quotations If Such Action Is In The Public Interest; Accept Other Than The Lowest Quotation; And Waive Informalities And Minor Irregularities In Quotations Received. (end Of Provision) statement Of Work parking Lot Sealcoat Treatment And Striping background: the National Weather Service (nws), Weather Forecast Office (wfo’s) In Pocatello, Id And Las Vegas, Nv Have Parking Lots That Have Not Been Resealed In 10-15 Years And Are In Severe Need Of Treatment. The Existing Surface Has Deteriorated With Large Cracks. general Intention: to Obtain The Services Of Crack Repair, Seal Coat And Re-striping Parking Stalls To Include One Handicap Stall With Handicap Symbol. general Requirements: the Contractor Shall Provide All Supervision, Labor, Tools, Materials And Equipment Necessary To Perform Work As Stated. All Work And Materials Supplied Shall Be In Accordance With These Instructions, Manufacturer’s Specification, All Applicable Federal, State, Local, Osha, Epa, Nec, Nfpa, Building And Facilities Codes And Criteria. the Contractor Shall: 3.1. Provide, As Necessary, Sufficient Traffic Barricades While The Work Is In Progress To Restrict Access To The Work Area Until The Sealer Application And Re-striping Work Is Completed. Remove The Barricades Only After Notifying The Contracting Officer’s Representative (cor) That The Work Is Complete And Vehicle Access Is Authorized. 3.2. Contractor Shall Verify All Measurements Stated Below For Wfo Specifications. Total Asphalt Area For Each Site Is Listed Below. pocatello, Id - 14,350 Ft2 las Vegas, Nv - 14,500 Ft2 3.3. The Material Used Is Within Its Manufacturer Stated Shelf Life; Proof Of Shelf Life Shall Be Provided To The Cor. 3.4. Prior To Surface Cleaning, Clean Out All Cracks Using Compressed Air, And Seal All Cracks Between 1/8” To 2” In The Pavement Using An Approved Crack Sealant. The Crack Sealant Shall Be Compatible With The Surface Sealer Being Applied To The Asphalt Paved Areas Of This Project. 3.5. Repair Cracks That Are Larger Than 2” In Width By Saw Cutting. Remove 6” Of Old Material On Each Side Of The Crack (1 Foot In Total). Pack Removed Area With New Asphalt. 3.6. Before Applying The Sealer, All Foreign Material Shall Be Removed From The Surfaces To Be Treated Including Stall Striping Tape, Loose Material, Dirt, Clay, Oil And Grease Spots. Oil And Grease Spots Shall Be Cleaned And Spot Primed. After The Cleaning Operation And Prior To Application Of The Sealer, The Contractor Will Inspect The Area To Be Treated To Determine Its Ability To Receive The Sealer. 3.7. The Asphalt Sealer Shall Be Of A Type That Has Been Used Commercially In The Specified Areas For At Least The Past Three Years. The Sealer Shall Also Have A Proven Record Of Satisfactory Performance Based On The Ability Of The Material To Reduce The Rate Of Loss Of Fines And To Retard Crack Propagation Of The Pavement. 3.8. All Pavement Markings Which Existed Prior To The Application Of The Surface Sealer Shall Be Reestablished By The Contractor After The Manufacturer-recommended Curing Period. All Guidelines And Templates Shall Be Furnished By The Contractor. Finished Edges Of All Markings Shall Be Sharply Outlined. Paint Colors Shall Be Those As Specified By The American Association Of State Highway And Transportation Officials (aashto) For The Intended Use. attachments pocatello Wfo Drawing las Vegas Wfo Drawing submittal Requirements: the Contractor Shall Provide Electronic Copy Of Each Required Submittal In Accordance With The Below Schedule: deliverable objective due deliver To specification Sheets Describing In Detail The Marking Paint To Be Used For All Sites determine Material To Be Used within 10 Days Of Awarded Contract cor specification Sheets Describing In Detail The Crack Sealing Material To Be Used For All Sites determine Material To Be Used within 10 Days Of Awarded Contract cor specification Sheets Describing In Detail The Surface Sealing Material To Be Used For All Sites determine Material To Be Used within 10 Days Of Awarded Contract cor work Schedule, With Start And Completion Dates coordinate Scheduling With Nws within 3 Days Of Awarded Contract, Or Before Work Begins cor designation Of On-site, Job-site Supervisor And Contact Information provide A Primary Point Of Contact (poc) To Nws contract Award cor 1-year Warranty Documentation warranty Parts And Labor upon Acceptance Of Work contracting Officer (co) sds (safety Data Sheet) list Any Hazardous Material That Will Be Used In Performance Of This Contract. Ref. Far 52.223-3 And Fed-std-313e within 3 Days Of Awarded Contract, Or Before Work Begins, Whichever Occurs First co/cor location: project Is To Be Completed On The Below Premises. pocatello, Id - 1945 Beechcraft Ave. Pocatello, Id 83204 las Vegas, Nv - 7851 Dean Martin Dr. Las Vegas, Nv 89139 period Of Performance: work Must Begin Within Ten (10) Business Days Of Award Of The Purchase Order; “work” Includes Ordering Materials Not Already In Stock And Necessary To Perform The Work. On Site Work Shall Be Completed Within Two Hundred And Forty (240) Calendar Days Of Receipt Of All Necessary Materials. definitions: where “as Shown”, “as Indicated”, “as Detailed”, Or Words Of Similar Import Are Used, It Shall Be Understood That Reference To The Drawings Accompanying This Specification Is Made Unless Stated Otherwise. where “as Directed”, “as Required”, “as Permitted”, “approved”, “acceptance”, Or Words Of Similar Import Are Used, It Shall Be Understood That The Direction, Requirements, Permission, Approval, Or Acceptance Of The Co Is Intended Unless Stated Otherwise. as Used Herein, “provided” Shall Be Understood To Mean “provided Complete In Place”, That Is “furnished And Installed”. regular Working Hours: regular Working Hours Are From 0700 To 1600 Monday Through Friday Except Federal Holidays And Other Days Specifically Designated By The Designated Representative. “regular Working Hours” Means Hours A Contractor Can Expect To Be Allowed To Perform Work On Site, Or Be Able To Contact The Office. Anything Outside Regular Working Hours Must Be Done By Permission Of The Cor. observance Of Legal Holidays And Site Closure Information the Contractor Shall Observe Any Federal Holidays If The Holiday Falls Within The Period Of Performance Of This Contract. when Any Holiday Falls On A Saturday, The Preceding Friday Is Observed; When Any Holiday Falls On A Sunday, The Following Monday Is Observed. All Personnel Assigned To This Contract Shall Limit Their Observation Of Holidays To Those Set Forth Above. in Each Instance, The Contractor Agrees To Continue To Provide Sufficient Personnel To Perform Requirements Of Any Critical Tasks Already In Operation Or Scheduled, And Shall Be Guided By The Instructions Issued By The Cor. In The Event Of A Site Dismissal Or Closure Due To Weather, Emergency Or Other Circumstances, The Contractor Is Instructed To Contact The Cor. 2025 Holiday Schedule date holiday wednesday, January 01 new Year’s Day monday, January 20 birthday Of Martin Luther King, Jr. monday, January 20* inauguration Day monday, February 17** washington’s Birthday monday, May 26 memorial Day thursday, June 19 juneteenth National Independence Day friday, July 04 independence Day monday, September 01 labor Day monday, October 13 columbus Day tuesday, November 11 veterans Day thursday, November 27 thanksgiving Day thursday, December 25 christmas Day *this Holiday Is Designated As "inauguration Day" In Section 6103(c) Of Title 5 Of The United States Code, Which Is The Law That Specifies Holidays For Federal Employees. Federal Employees In The Washington, Dc, Area Are Entitled To A Holiday On The Day A President Is Inaugurated On January 20th For Each Fourth Year After 1965. **this Holiday Is Designated As "washington's Birthday" In Section 6103(a) Of Title 5 Of The United States Code, Which Is The Law That Specifies Holidays For Federal Employees. Though Other Institutions Such As State And Local Governments And Private Businesses May Use Other Names, It Is Our Policy To Always Refer To Holidays By The Names Designated In The Law. conduct Of Work the Contractor Must Ensure Employees Are Physically Able To Accomplish The Work Specified Herein. All Such Employees Working On Government Premises Are Subject To All Applicable Federal Rules And Regulations With Regard To Entering And Leaving The Premises And Building(s). Any Contractor Employee Who Is Considered Incompetent, Careless, Insubordinate, Unsuitable, Or Otherwise Objectionable Or Whose Continued Employment Is Contrary To The Public Interest By The Government’s Designated Representative Will Be Promptly Removed From The Contract Work Upon Notification To The Contractor By The Contracting Officer That Such Conditions(s) Described Above Exist. Onlylegal Us Citizens And Immigrants Are Allowed To Work On Federal Government Construction Projects. safety Requirements: all Work Shall Be Conducted In A Safe Manner And Shall Comply With Station Regulations And Department Of Labor Standards. The Government Will Not Provide Safety Equipment To The Contractor. The Contractor’s Work Site May Be Inspected During Performance Of The Contract For Osha And Station Safety Violations. It Will Be The Contractor’s Responsibility To Rectify Any Violations Immediately. the Contractor Shall Report Any Accidents That Occur During The Performance Of The Contract To The Co Or A Designated Representative, Within 24-hours Of An Occurrence. provide And Maintain Fire Extinguishers In Construction Areas. Flammable And Combustible Liquids: Store, Dispense And Use Liquids In Accordance With 29 Cfr 1926, Nfpa 241 And Nfpa 30. security Requirements: all Personnel Performing Work Under This Contract Shall Be Legal Citizens Or Legal Immigrants Of The United States. identification Of Contractor Vehicles: each Contractor Provided Vehicle Shall Show The Contractor’s Name That Is Clearly Visible And Let The Administrative Assistant At The Front Desk Know What Vehicle Belongs To You As The Contractor. Display A Valid State License Plate And Safety Inspection Sticker, If Applicable. Contractor Vehicles Operated On Government Property Shall Be Maintained In Good Repair. station Regulations: the Contractor And His Employees Shall Become Acquainted With And Obey All Government Regulations As Posted, Or As Requested By The Cor. government-furnished Equipment, Utilities, And Facilities: a Designated Representative Will, Upon Request, Designate Specific Areas Adjacent To The Building And Within The Existing Parking Lot, Specific Areas For The Delivery And Lay-down Of Materials And Equipment To Be Used By The Contractor Specific To This Work. Utilities, Such As Electricity Specific To This Work Will Be Supplied By The Government. cleanup: the Premises Shall Be Kept Free At All Times From Accumulation Of Waste And/or Rubbish Resulting From The Work. Upon Completion Of The Work, All Debris, Tools And Surplus Materials Shall Be Removed And The Entire Area Shall Be Left In A Neat And Clean Condition. All Debris, Trash, Waste And Surplus Material Shall Be Properly Disposed Of Off-site. points Of Contact: to Be Provided At Time Of Award. invoicing: upon Completion And Acceptance Of The Work, The Invoice Shall Be Submitted Via The Invoice Processing Platform (ipp). The Nws Designated Representative To Certify For Payment Is To Be Provided At Time Of Award. construction Order Certifications And Other Statements Of Offerors (fixed-price) ***note: Offeror Must Complete And Return This Section With Quote.*** order/contract Number: 1305m325q0041 name Of Offeror: ____________________________________ asbestos-containing Materials Certification the Offeror Hereby Certifies That No Asbestos-containing Materials, Products Or Supplies Will Be Delivered To The Work Site Or Utilized Or Installed During The Performance Of The Proposed Contract. The Offeror Also Certifies, That If Awarded The Contract, They Will Be Responsible For The Cost Of Removal Of All Asbestos-containing Materials, Products Or Supplies Delivered To The Work Site Or Utilized Or Installed During The Performance Of The Contract, And The Cost For Remediation Of Any Hazard Created. offeror Name: ________________________________________ certifying Official (vendor Signs) signature: printed Name: title: date: authorized Negotiator(s) the Offeror Or Respondent Represents That The Following Persons Are Authorized To Negotiate On Its Behalf With The Government In Connection With This Request For Offer: name title telephone Number

Details: Description Invitation To Bid – Supply, Delivery, Installation And Commissioning Of Various Equipment And Machineries 1. The Southern Leyte State University-hinunangan Campus, Through The Regular Agency Fund Intends To Apply The Sum Of : Lot 1: Scientific And Laboratory Equipment And Machineries Abc: ₽ 1,329,800.00 Lot 2: Solar Pv And Generator System Abc: ₽665,200.00 Being The Abc To Payments Under The Contract For Each Lot. Bids Received In Excess Of The Abc For Each Lot Shall Be Automatically Rejected At Bid Opening. 2. The Southern Leyte State University-hinunangan Campus Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Not More Than 120 Calendar Days Upon The Issuance Of Notice To Proceed. The Bidder Must Have Satisfactorily Completed A Similar Contract Within The Last Three (3) Years, From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Southern Leyte State University – Hinunangan Campus And Inspect The Bidding Documents At The Address Given Below From 8:00 Am To 5:00 Pm, Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 28, 2024 From The Given Address And May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of Slsu And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount: Lot 1- Scientific And Laboratory Equipment And Machineries – ₽ 5,000.00 Lot 2: Solar Pv And Generator System- ₽ 1,000.00 The Prospective Bidder May Deposit The Payment For The Bidding Documents Through This Bank Account. Account Number: 4182100965 Account Name: Slsu-caes Trust Receipts/itf Branch: Lbp – San Juan Branch The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Presented In Person, Or Through The Email Address Provided. 6. The Southern Leyte State University-hinunangan Campus Will Hold A Pre-bid Conference In Hybrid Mode On January 06, 2025, At 9:30 A.m Pst At The Business Hub, Academic Building, Southern Leyte State University-hinunangan, Ambacon, Hinunangan, Southern Leyte And /or Through Video Conferencing Or Webcasting Via Microsoft Teams Through This Link: Https://teams.microsoft.com/meet/474572840811?p=0derzualnpbc8xgiop Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below And Online Or Electronic Submission As Indicated Below, On Or Before January 20, 2024, At 8:30 Am. Pst. Bids That Will Be Submitted Online Must Be Encrypted With A Password To Protect Privacy. Password Will Be Asked By The Bac Secretariat During The Opening Of Bids For Access. The Bac Secretariat Assured That Files/bids Will Be Cared Of With Utmost Veracity In The Privacy/confidentiality Late Bids Shall Not Be Accepted. For Manual Submission: Conference Room, Administration Building, Slsu-hc, Ambacon, Hinunangan, Southern Leyte For Online Submission: Procurement_hn@southernleytestateu.edu.ph 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 20, 2024 At 9:30 A.m Pst At The Business Hub, Academic Building, Slsu-hinunangan, Ambacon, Hinunangan, Southern Leyte And/or Via Zoom Through This Link Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Southern Leyte State University-hinunangan Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders 11. For Further Information, Please Refer To: Mary D. Almine Head, Bac Secretariat Southern Leyte State University-hinunangan Ambacon, Hinunangan, Southern Leyte Contact Number: 0919 067 2842 Email Address: Procurement_hn@southernleytestateu.edu.ph 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Https://notices.philgeps.gov.ph/ Slsu Website: Southernleytestateu.edu.ph For Online Bid Submission : Procurement_hn@southernleytestateu.edu.ph December 27, 2024 (sgd)dr. John Paul R. Gapasin Bac Chairperson