Camera Tenders

Details: Description The National Library Of The Philippines (nlp), Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required From January 1, 2025 – December 31, 2025, As Specified In The Schedule Of Requirements. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A.bidding Is Restricted To Filipino Citizens/sole Proprietorship, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Prospective Bidders May Obtain Further Information From Nlp Bids And Awards Committee (bac) Secretariat Email Address And Inspect The Bidding Documents Posted At The Philippine Government Electronic Procurement System (philgeps) Or In Our Official Website Web.nlp.gov.ph. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 14, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Ten Thousand Pesos (p10,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Upon Acquisition Of Said Documents In Person Or On Before Submission Of Bids By Facsimile, Or Through Electronic Means, If Documents Are Downloaded Electronically. 6. The Nlp Will Hold A Pre-bid Conference On November 22, 2024 At 01:30 Pm Through Video Conferencing Via Zoom Which Shall Be Open To All Prospective Bidders. Send Interest To Bac@nlp.gov.ph With Subject: Request To Join The Pre-bid Conference Of Public Bidding No. 24-23. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Below On Or Before December 06, 2024 At 01:00 Pm. Usb Flash Drive Containing The Soft Copy Of The Technical (in Pdf) And Financial (in Word Or Excel) Requirements Must Be Included In The Original Copy Of The Technical Documents. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On December 06, 2024 At 01:01 Pm At The 6th Floor Function Room, Nlp Building, T.m. Kalaw St. Ermita, Manila. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 11. The Nlp Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Maureen M. Terrenal Marie Joy H. Bestoir Eleanor C. Siyang Jonathan F. Santos Bac Secretariat National Library Of The Philippines Tel. No.: (02) 5314-2100loc. 406 / 412 Email: Bac@nlp.gov.ph Website: Web.nlp.gov.ph 13. You May Visit The Following Websites: For Downloading Of Bidding Document: Web.nlp.gov.ph / Www.philgeps.gov.ph Sgd. Maricel M. Ureña Bac, Chairperson Security Guards I. 20 Guards For The National Library Of The Philippines With The Following Applications Of Duty A. 18 Guards, 8-hours Duty, To Man The Following Areas: three (3) – Main Lobby (6am-2pm / 2pm-10pm / 10pm-6am) three (3) – Ams Hall (6am-2pm / 2pm-10pm / 10pm-6am) three (3) – Command Center (6am-2pm / 2pm-10pm / 10pm-6am) two (2) – Vehicle Entrance / Exit Gate (6am-2pm / 2pm-10pm / 10pm-6am) one (1) – Reading Room Roving Guard (2nd Floor) (8am-5pm) one (1) – Children’s Library Entrance (8am-5pm) one (1) – Permanent Gallery Entrance (8am-5pm) one (1) – Presidential Library (8am-5pm) two (2) – Roving Guard (6am-2pm / 2pm-10pm / 10pm-6am) one (1) – Lady Guard Entrance 2nd Floor Reading Area (8am-5pm) B. 2 Guards, 12 Hours Duty, To Supervise The Guards Ii. 2 Guards For The Sentro Ng Karunungan Library (skl) With The Following Application Of Duty  Two (2) 8-hours For The 14-hour Post At The Main Entrance Of The Library (6am-2pm / 12nn-8pm) Preferably 1 Lady Guard Agency Fee  Administrative Overhead And Margin - Maximum To 20% Agency Requirements  Certification From At Least Three (3) Clients (existing) That The Agency Is Compliant With Labor Laws And Legislation, Particularly On The Salaries And Benefits Of The Guards  Certificate Of Padpao Membership  Certification Of Accreditation From Pnp - Susia / Sagsd License To Operate  The Service Provider Must Possess A Valid License To Operate, Demonstrating Compliance With All Legal And Regulatory Requirements. The License Should Be Issued By The Relevant Government Authority Responsible For Overseeing Security Services.  The Service Provider Should Have Its Own Security Training Center, Which Is Duly Accredited By The Government. This Training Center Should Meet The Necessary Standards And Requirements Set Forth By The Regulatory Body. The Agency Is Required To Submit Pictures And A Valid Permit To Operate The Training Center.  In Cases Where The Service Provider Does Not Have Its Own Security Training Center, They Must Have A Memorandum Of Agreement (moa) With Another Accredited Security Training Agency. The Moa Should Outline The Terms And Conditions Of The Partnership, Including Details Of The Training Program, Trainers, And Any Other Relevant Information.  The License To Operate Should Be Maintained And Kept Up To Date Throughout The Duration Of The Contract. Any Changes In The License’s Status Must Be Promptly Communicated To The Contracting Organization.  Failure To Provide And Maintain A Valid License To Operate Or A Valid Moa With An Accredited Training Agency May Result In Disqualification From Providing Security Services. Agency Must Be In Existence For The Last Five (5) Years  Certification From Five (5) Clients Confirming The Agency’s History With A Number Of Posted Guards Not Exceeding 50.  Latest Certification From Sss / Philhealth As To The Agency’s Remittance System  Agency Must Have 34 Hours Roving Inspector  Agency Main Office Must Be Within Metro Manila (submit Pictures And Required Documentation) Personnel Qualifications  Minimum Of 2 Years Of Security Experience  Security Training Certificate (bsgtc / Supervisory Instructional)  Duly Licensed  At Least College Level Education  Preferably Not More Than 40 Years Old  Preferably With Driver’s License Uniform  White (bass Jacket Style) Upper  Blue Pants  Pershing Cap  Night Stick  Whistle  Holster  Flashlight Devices And Other Peripherals 1. Rain Coat 2. Umbrella (for Visitors) 3. Metal Detector (latest) 4. Safety Deposit Box (for Firearms) 5. Hand-held Radio (walkie Talkie) 6. Cctv (10 Units For Nlp) Firearms Check - Nlp And Skl [attachment -ra No. 5487 (annex B)] 1. Shotgun (12 Gauge) - One (1) Present In The Office 2. Cal. 45 With Ammunition - For Security Officer (1) 3. Cal. 38 With Ammunition - For Uniformed Guards (7) Additional Set Of Technical Parameters Stability 1. Liquidity Of Contractor 2. Organizational Set-up (agency Must Submit Organizational Chart) 3. Industry Experience Surveillance Personnel Qualification:  Training In Surveillance Systems: Knowledge And Hands-on Experience With Cctv, Video Analytics Software, Access Control, And Intrusion Detection Systems.  Knowledge Of Surveillance Equipment: Proficiency With Cctv Cameras, Monitoring Software, Communication Devices, And Alarm Systems.  Computer Literacy: Basic To Advanced Skills In Computer Operation, Data Entry, And Familiarity With Microsoft Office And Specialized Surveillance Software.  Attention To Detail: Ability To Identify Suspicious Behaviors, Monitor Multiple Feeds, And Detect Anomalies Or Unusual Patterns In Real-time.  Communication Skills: Ability To Communicate Effectively With Team Members, Law Enforcement, And Other Stakeholders.  Professionalism: Commitment To Confidentiality And Adherence To Surveillance Protocols.  Ethical Integrity: Ethical Integrity Is Critical, As Surveillance Involves Handling Sensitive Information And Maintaining Trust. Resources 1. No. Of Licensed Firearms (agency Should Have At Least 50 Licensed Firearms And Should Show Proof Of The Licenses)  No. And Kind Of Communication Devices (agency Should Have At Least 50 Available Communication Devices That Are Licensed Under The Ntc)  No. And Kind Of Motor Vehicle S (agency Should Show Proof Of The Number Of Vehicles They Own.  They Should Have At Least 5 Vehicles And At Least 2 That Are In Standby In Case Of Emergencies.  No. Of Licensed Guards (agency Should Have At Least 50 Licensed Guards Currently Employed) Security Plan The Agency Should Submit A Security Plan For The National Library Of The Philippines And Sentro Ng Karunungan Library. The Plan Should Include Contingencies For All Kinds Of Threats Dealing With The Education Sector. Special Concern Should Be Given To Crowd Control And Dispersal. Other Factors 1. Recruitment And Selection Criteria (agency Should Show Documentation Of Their Recruitment And Selection Process) 2. Completeness Of Uniforms And Other Paraphernalia (agency Should Submit Pictures Of Standards Uniform And List Of Other Paraphernalia Related To Security Services - Including But Not Limited To Metal Detectors, Cctv Equipment, Safety Deposit Box And Others) 3. Track Record Of Security Agency As Evidenced By The Certification From Previous Clients (agency Should Submit Certification From At Least Five (5) Organizations Of Their Very Satisfactory Service). Salary Adjustment In Compliance With Dole-nwpc  The Service Provider Shall Adhere To The Applicable Department Of Labor And Employment (dole) Laws And Regulations Concerning The Compensation Of Security Personnel. In Accordance With These Laws, Security Personnel Have The Right To Claim An Increase In Their Salary Or Benefits Should The Dole Mandate Such Adjustments.  Should The Dole Or Any Relevant Government Authority Issue A Directive, Order, Or Law That Requires An Increase In The Base Salary, Benefits, Or Allowances For Security Personnel, The Service Provider Agrees To Promptly Implement These Changes. Any Increase In Salary Or Benefits Mandated By Dole Or The Relevant Authorities Shall Be Borne By The Contracting Organization.  The Service Provider Shall Notify The Contracting Organization Within A Reasonable Timeframe Of Any Changes In The Dole Laws Or Regulations That Impact The Compensation Of Security Personnel. The Notification Should Include Details Of The Specific Changes, Their Effective Date, And The Resulting Adjustments In Salary Or Benefits.  The Contracting Organization And The Service Provider Shall Cooperate In Good Faith To Ensure That All Necessary Adjustments Are Made Promptly And In Full Compliance With Dole Laws. In Case Of Any Disputes Or Uncertainties Regarding The Interpretation Or Application Of These Laws, Both Parties Agree To Engage In Dialogue And Seek A Mutually Agreeable Resolution.  This Clause Shall Be In Effect For The Duration Of This Contract And Any Subsequent Renewals Or Extensions.

Details: Description 1 Bolster Chair "designed For Children Who Need A Wide Base Of Support In Order To Achieve Good Pelvic Position, Lower Extremity Position, And Trunk Alignment For Stable Sitting." 1 2 Perkins Brailler-braille Typewriter "a Braillewriter Is Also Called A Brailler. A Mechanical Braillewriter Works A Little Bit Like A Typewriter. It Has Six Keys—one For Each Dot In A Braille Cell—a Space Bar, A Backspace Key, A Carriage Return, And A Line Feed Key. Like A Slate And Stylus, A Braillewriter Uses Heavyweight Paper That Will Hold The Braille Dots Well. It Takes Practice To Use A Brailler, But Some Kids Can Write Quickly Using One!" 2 3 Slate And Stylus "a Slate And Stylus Is Inexpensive, Portable Tool Used To Write Braille—similar To The Way Paper And Pencil Are Used For Writing Print. Slates Are Made Of Two Flat Plates Of Metal Or Plastic Held Together By A Hinge. The Slate Opens Up, Then Clamps Down To Hold The Paper. The Top Plate Has Rows Of Openings That Are The Same Shape And Size As A Braille Cell, While The Back Plate Has Rows Of Indentations In The Size And Shape Of Braille Cells. The Stylus Is A Pointed Piece Of Metal With A Plastic Or Wooden Handle. The Stylus Is Used To Punch (emboss) The Braille Dots Onto The Paper. The Tricky Part? The User Has To Learn To Write Braille Backwards So That It Reads Correctly When Removed From The Slate! With Practice, A Kid With A Slate And Stylus Can Write Braille Pretty Fast." 3 4 Teachable Touchables Sensory Squares "sensory Exploration Is Fun With Teachable Touchables Sensory Squares! This Versatile Set Provides A Variety Of Sensations To Explore, Including Scratchy, Slippery, Silky, And Soft Textures. Ideal For Tactile Play And Hands-on Learning, This Set Promotes Gross And Fine Motor Skill Development While Also Providing Opportunities To Build Descriptive Vocabulary." 10 5 Complete Interactive Reading 16 Book Set "use The Complete Set Of 16 Interactive Reading Books To Meet Your Iep Goals! This Set Was Created By An Autism Specialist With Years Of Classroom Experience To Help You Teach Your Special Students A Wide Variety Of Concepts. Each Book Was Developed After Interviews With Speech And Language Pathologists Across The Us. Interactive Reading Books Utilize The Power Of Visual Strategies So Beginning Readers Can Learn To Associate Pictures With Words. Students Move And Attach Picture Cards With Hook And Loop Fasteners To Match, Identify, Label, Sequence And Create Sentences While Learning To Read. The Books Are Fun And Rewarding For Children With And Without Special Needs. Teachers, Therapists, Assistants And Family Members Can All Use The Books With Their Students Or Children. The Books Can Be Used In A Group, 1:1 Or As An Independent Activity." 5 6 Soft Corner Set "the Grade School Soft Corner Set Is Perfect For The Sensory Room In Your Elementary School. This Set Includes A Large 26"" Cube, Slide, Bumpy Ramp, And Two Large Wedges. Use It In The Corner Of Your Classroom Or Sensory Room. Reconfigure It To Create An Obstacle Course During Your Ot Time. This Set Is Perfect For Building Gross Motor, Balance, And Coordination Skills." 1 "your Students Will Love Jumping, Climbing And Sliding On This Sturdy Set Made From Heavy Duty Foam And Vinyl That Features Reinforced Stitching. You Can Attach Pieces Together With Hook And Loop Pieces Sewn On The Sides. For Maximum Stability Set It Up In The Corner Of Any Room. Made With Wipeable Vinyl That Is Easy To Clean, This Set Is Designed To Stand Up To Lots Of Use In A Home, Classroom, Or Therapy Center." 7 Arcada Swing Stand And Chair Arcada Free-standing Stand Provides The Anxious Or Overstimulated With A Safe Calming Space Or Vestibular Input To Those Who Need It. This Stand Is Designed To Work With Both Single Point Hammock Chairs And The Joki Swing. 2pcs A Detachable Safety Net That Keeps Users From Swinging Too Aggressively. This Protects The Swing From Tipping. "a Wide 5'1"" X 4'11"" Base That Provides Lots Of Stability." Full Frame Is Made Of Powder Coated Galvanized Steel. An Adjustable Rope Fastening System Allows You To Easily Adjust The Height Of The Swing. It Has A Max Load Of 350 Pounds And Can Work With Both Kids And Adults. 8 Rotation Board With Handles "this Balancing Board Features An Anti-skid Surface So Students Can Stand Or Sit On It With Confidence. Use It To Provide Vestibular Input As Your Students Rock Side To Side. Or Have Your Students Sit On It, Hold On To The Handles, And Spin It For Even More Vestibular Input." 3 "four Padded Handles And A 28"" X 28"" Surface Allows Two Students To Sit And Play At A Time. Two Base Mounts (1.2"" And 1.6"") Allow You To Increase The Angle Of The Board To Help Your Students Continue To Build Their Core Muscles And Balance Skills As Their Skills Increase." Max Load: 125 Pounds Size: 28 X 28 X 6 Inches 9 Squeeze Seat "your Students Will Love The Deep Pressure The Squeeze Seat Provides! Its Innovative Design Squeezes You When You Sit In It. Give Your Students A Calming Deep Pressure ""hug"" To Help Their Systems Organize. Designed With Educators In Mind This Chair Features Easy To Clean And Durable Vinyl As Well As Reinforced Stitching. The Bottom Of The Chair Has A Small Flat Section That Provides Stability. However, You Can Also Rock It Back And For For Additional Vestibular Input." 1 Max Weight: 150 Pounds "size: 29"" X 13"" X 25.5"" " Recommended Ages: 2-12 Years. 10 Best Braille Toys For Kids Who Are Blind "the Best Way For Any Child To Learn To Read Is Through Constant Exposure To The Written Language… And Through Play! Sighted Children Play With Alphabet Blocks Or Simple Word Puzzles When They Are Young To Help Develop A Foundation For Literacy, And Blind Children Have The Same Opportunities With Toys In Braille." 2 11 Miniland Educational - Activity Buttons With Laces 2 Pcs Brand-miniland Age Range (description) Kid Color-multicolor Item Dimensions L X W X H: 9.25 X 7.68 X 2.95 Inches Material-plastic About This Item Kids Discover The Fun In Playing With These Brightly Colored Miniland Activity Buttons Each Button Has A Number In Relief Plus Its Equivalent Braille Symbol This Lacing Buttons Set Is A Part Miniland Educational Toys For Play And Learning "includes Big Buttons With 1 Of 5 Holes In Bright Colors For Sequencing & Sorting, Long Laces And Activity Worksheets" Appropriate For Children Ages 3 To 6 Years Old 12 "learning Resources Interlocking Base Ten Starter Set," "learning Resources Interlocking Base Ten Starter Set, Early Math, Counting, Connecting Blocks, 141 Piece Set, Ages 6+" 5pcs "units Are Made Of Durable, Washable Plastic For Years Of Hands-on Activities" "help Students Understand Abstract Base Ten Concepts; Including Place Value, Estimation, Operations And Fractions" "141 Pieces Include: 100 Units, 30 Rods, 10 Flats, 1 Cube, And 96-page Base Ten Activity Book" Starter Set Perfect For Use With 3-4 Students 13 Granstand Iii Modular Standing System - 1 Pc "the Granstand Iii Comes Standard With An Expandable Transport Base With 3"" Plastic Casters, Height And Depth Adjustable Chest Pad, Height And Depth Adjustable Clear Table Top, Width And Depth Adjustable Foot Pads, Pull-to-place Seat Sling, And Depth And Height Adjustable Knee Pad. Weight Limit 250 Lbs Base Dimensions Closed 27.5"" W X 40.5 "" D Base Dimensions Open 35.5"" W X 40.5"" D Standard Tray Size 24"" W X 18"" D" 14 Kidney-shape Table With Learner's Chair - 10 Pcs "key Features Includes Four Stacking Chairs And One 36"" X 72"" Kidney-shaped Activity Table The 16"" Seat Height Is Recommended For Fourth Through Sixth Grade Table Tabletop Material: 1 1/8"" Thick Leg Material: Powder-coated Tubular Steel Height: 21"" - 30"" Adjustable In 1"" Increments Width: 36"" Length: 72"" 15 Gas Range And Oven - 2 Pcs "3 Gas Burners, 1 Hot Plate Stainless Drip Tray Gas Thermostat Oven Electric Grill With Rotisserie Black Enameled Body 50x50cm Weight: 39.5 Kg 16 Phonics Phones - 1 Pc "pack Of 16: Perfect For Classrooms. You Get 16 Whisper Phones For Classroom Reading. 4 From Each Color. Comes In Red, Purple, Green, & Pink. Our Phonic Phone Is A Great Addition To Your Phonic Manipulative Materials, Speech Therapy Toys For Kids Package Dimensions: 8.9 X 8.9 X 4.1 Inches Item Weight: 8.8 Ounces" 17 Augmentative Communication Systems - 2 Pcs "pocket Go-talk 5-level Communication Device Five Message Buttons At 2.2cm X 3.8cm (7/8” X 1 1/2”) Five Recording Levels 4.16 Minutes Total Recording Time (10 Seconds Per Message) Dial Controlled Volume Button Excellent Sound Quality Two Aa Batteries Included Low Power Consumption Record And Level Lock Capable 7.6cm X 13.6cm X 3.8cm 212 Grams (7.5 Oz) " 2 18 Call Lights - 1 Pc "with Many Colors: Red, Blue, Green Or Mix Different Color For Different Service Type It Can Work With 30 Transmitter In Max. With Separate Output Power Supply: Dc5v The Prompting Sound Can Be Turned On/off Dimension: 78*78*60mm Color: White" 19 Adjustable Height Exercise Steps - 1 Pc "color: Teal/purple Brand: Us Weight Item Weight: 80 Ounces Item Dimensions Lxwxh: 30 X 15 X 8 Inches About This Item Made In The United States From Durable, Recyclable High-density Polyethylene Circuit-size (28. 5"" L X 14. 5"" W X 4"" H) Aerobic Platform, 4 Original Risers, And Streaming Videos Platform Features Grooved, Nonslip Top And Supports Up To 275 Lbs Four Nonskid Feet On Each Riser And Platform Prevents Sliding Or Scratching Floors Vary Workout Difficulty By Adjusting Platform Height From 4"" To 6"" To 8"" Using Risers" 20 Wedge Bolsters - 1 Pc "use A Wedge Bolster Along With Our Quicklock Face Rest Platform To Create A Quick And Easy Backrest For Any Portable Or Stationary Massage Table. Dimensions: 24""w X 10""h X 24""l With A Flat Top And A 36"" Incline." 21 Round Bolsters "6"" Round Bolster 1 Pc Bolsters Are Made With Earth Friendly Materials Of Cfc Free Foam And Pvc Free Upholstery Choices. High Quality Foam Offers Comfortable Support And Allows Clients To Fully Relax, And Come With Pull Handles At Both Ends For Therapist Convenience. Unlimited Versatility Makes This Comfortable And Supportive Cushion Your Building Block For Positioning. Measures 6"" D X 26"" L. Made Of Aero-cel Foam: Won't Flatten Or Get Lumpy Like Dacron Bolsters Incredibly Supple Conforms To Fit Curves Firm Gentle Support" 22 Lcd Projector - 2 Pcs Eb-w41, White Light Output (normal/eco): 3,600lm/2,235lm, Colour Light Output: 3,600lm, Dimension Excluding Feet(wxhxd): 302x77x234 Mm, Weight 2.5 Kg" 2 23 Carpet - 3 Pcs "4'x6' Soft Carpet For Lwds While Taking Physical, Psychomotor Assessment Soft Solids Classroom Carpets Carry A Lifetime Abrasive Wear Warranty. Features An Anti-static Treatment And Made With N6 Recyclable Yarn Type. Meets Or Exceeds Class I Fire Rating As Specified In Nfpa Life Safety Code 101." 24 Treatment Table - 1 Pc "product Name: Multi Functions Physical Electric Therapy Treatment Table Size: L2040*w560*h550-820mm Product Feature 1. Electric Operation,3 Sections, New Design Epoxy Metal Frame. 2. Equipped With 3 Motors For Height, Back And Leg Rest Adjustment. 3. Height Adjustments For The Arm Rests. 4. With Artificial Leather Cover On The Head, Seat, Leg Areas. 5. 4 Luxurious Castors With Brake. Function: Suitable For Hospital Electric Therapy Treatment Table Use." 25 Hand Dynamometer - 2 Pcs "type: Electronic Counting Gripper Function: Comprehensive Fitness Exercise Material: Abs Size: 15cm/5.90""x10.5cm/4.13""x2cm/0.79""" 26 Soft And Foldable Ball Pit - 1 Pc "small Round: 63"" Diameter X 15.7""h. Weighs 14.3 Lbs. Holds 4-5 Kids And 1250 3"" Diameter Balls. Color: Blue. Small Padding: 63"" Diameter X 0.78""h. Weighs 14 Lbs. Small Padding: 63"" Diameter X 0.78""h. Weighs 14 Lbs. Large Round: 78.7"" Diameter X 15.7""h. Weighs 18.5 Lbs. Holds 6-7 Kids And 1500 3"" Diameter Balls. Color: Blue. Large Padding: 78.7"" Diameter X 0.78""h. Weighs 18.5 Lbs. Large Padding: 78.7"" Diameter X 0.78""h. Weighs 18.5 Lbs. Medium Square: 78.7""l X 47.2""w X 15.7""h X 1.9""d. Weighs 20 Lbs. Holds 4-5 Kids And 1000 3"" Diameter Balls. Pistachio, Blue, Orange And Lilac. Medium Padding: 78.7""l X 47.2""w X 0.78""h. Weighs 20 Lbs. Large Square: 78.7""l X 78.7""w X 15.7""h X 1.9""d. Weighs 27.6 Lbs. Holds 6-7 Kids And 1250 3"" Diameter Balls. Pistachio, Blue, Orange And Lilac. Large Padding: 78.7""l X 78.7""w X 0.78""h. Weighs 27.5 Lbs. Made Of Pvc Upholstery. Filled With Polyethylene Foam Surface Wash. Air Dry." 27 Goal Ball Kit - 5 Pcs "goalball Kit (includes Everything You Need To Start A Goalball Program – 2 Ibsa-certified Goalballs, 6 Eyeshades, 6 Pairs Of Knee/elbow Pads, A Reusable Prefabricated Court And 2 Rolls Of Court Tape) " 28 Triumph Competition 100mm Resin Bocce Ball - 5 Pcs 107mm Official Bocce Ball Set Regulation Size And Weight 920g/2.03lbs 29 """true-grip"" Indoor Shot Put Blue Shell" - 5 Pcs "true Grip"" Indoor Shot Put – It Has A Hard Shell That Provides A Good Grip, Bounces Very Little, And Maintains Its Shape. ""soft"" Indoor Shots Are Tough, Polyvinyl Plastic Shots That Change Shape And Don't Bounce. ""super Soft"" Indoor Shot Puts Are The Softest Indoor Shots Made – The Vinyl Shots Do Not Bounce Or Lose Shape And Are Excellent For Wood Floors. ""pro-line"" Tungsten Indoor Shots Are The Smallest Indoor Shot Puts Made. They Are Popular Because Their Diameter Is Similar To An Outdoor Shot Put." 2k 6 Lb. 30 Wind Up Toys - 5 Pcs "wind Up Toys,powered By A Metal Spring That Is Tightened By Turning It,classical Funny Simple Games,non-toxic And Odor-free. Perfect Gift For Kids Party Favors, Goodie Bags, Classroom Rewards, Stocking Stuffers, Easter Egg Stuffers. Clockwork Toy, Each Character Does A Different Trick Such As Swimming In Water,flipping,sliding,spinning,walking,shaking Head Or Tail And Many More To Be Discovered. Wind-up Toys Measure About 2 Inch, Including Dinosaur,egg,cat,bird,caterpillar,beetle And Car Etc. Package Content: 16 No Duplicate Wind Up Toys(contents And Color May Vary). Every One Of Them Has A Windup Mechanism." 31 Wordless Picture Books 5pcs "language ? : ? English Hardcover ? : ? 32 Pages Reading Age ? : ? 4 - 6 Years Item Weight ? : ? 1.28 Pounds Dimensions ? : ? 10.25 X 0.5 X 12 Inches" 32 Articulation Cards 5pcs "7 Illustrated Card Decks (448 Cards, 3¼"" X 4¼"") – Each Deck Of 32 Picture-word Card Pairs Targets A Specific Speech Sound - P, B, T, D, M, J, Includes Storage Tins In A Metal Tote, Master Word Lists, 50 Smiley Face Tokens, And Game Ideas Card Set 1, Card Set 2 And Card Set 3 " 33 Hand Dynamometer 2pcs "type: Electronic Counting Gripper Function: Comprehensive Fitness Exercise Material: Abs Size: 15cm/5.90""x10.5cm/4.13""x2cm/0.79""" 34 Core Peak Bolsters 2pcs "core Peak Bolster Peaked Shape Fits Comfortably Under Your Knees Precision-cut Foam 10"" X 24"", With 7"" Peak Available In Blue, Gray, Or Black" 35 Assessment Tool- 5pcs "set Of Assessment Tools For Behavioral, Psychological, Intellectual, Motor, Socio-emotional (5 Copies Per Set) Like: Ravens Progressive Matrices Tests, Goodenough-draw A Person Test, Wechsler Intelligence Scales For Children (wisc-v)" 36 Sofa - 1 Pc "seating Capacity 2 Velvet: 100 % Polyester Frame Material Manufactured Wood Leg Material Manufactured Wood Seat Fill Material Foam Seat Construction Mdf Back Fill Material Foam Tufted Cushions Square Arm" 37 Portable Electronic Magnifier-1pc "5 Inch High-definition Color Lcd Screen. Dual Camera Design, Get View Both Far And Near. Continuously Adjustable Magnification From 4x-32x." Sharp Full Color Mode And 14 Other Modes For Reading. Rechargeable Lithium Battery With 4 Hours Continuous Use. Adjustable Brightness Of The Backlight And Adjustable Intensity Of Fill-in Light. Screen Lock: Freeze A Text Image On Screen For Easier Reading. Electronic Curtain Function: Highlight On Reading Text Horizontally And Vertically To Avoid Light Interference. Memory Function: Automatically Save All The Last Settings. 38 Sound System - 1 Pc "2-way Pa With Powered 8-channel Mixer And Bluetooth? Everything You Need To Be Heard Get Legendary Sound Quality With The Eon208p All-in-one Portable Pa System, Complete With An 8-channel Mixer, Bluetooth Audio And Included Akg Microphone. With..." 39 Sound System - 1 Pc "complete Pa System, * Pvi 4b Powered Mixer * Two Pvi 10 Speakers * Two Pvi 100 Dynamic Cardioid Microphones * Two Speaker Stands * Cables" 40 Microphones Super Cardioid Dynamic Microphone 10pcs 41 Aircon 2.5 Inverter Split-type Aircon 2pcs 42 Laptop Hp Laptop | 15 Inch | Intel I7 | 16gb Ram | 512gb | Windows 11 | Amd | 2 Yr Wty | Free Laptop Bag 18 43 Building Blocks Hb Mega/ Jumbo Building Blocks 88pcs Super Builder Jumbo Building Blocks Big Sizes (10 Sets) 10 44 Shape Intelligence Box K2-shop Shape Intelligence Box Wooden Toy (10 Sets) 10 45 Scrabble Original Portable English Word Spelling Board Game (tiles) 10 Sets 10 46 Ladder Kids Puzzle 33pcs Ladder Kids Puzzle Jigsaw Puzzles Baby Toddler Early Education Cartoon Animal (10 Sets) 10 47 Cylindrical Building Blocks Cylindrical Building Blocks Montessori Early Education Toys Wooden Pegs Pegboard Fine Motor Skills (10 Sets) 48 Wooden Rainbow Stacker Bollie Baby Wooden Rainbow Stacker Nesting Puzzle Blocks Educational Montessori Toys For Kids Baby (10 Sets) 10 49 Tangram Shape Puzzle Tangram Shape Puzzle With Pattern Cards (10 Sets) 10 50 Blocks Puzzle Hch Ze Geoanimo Blocks Puzzle Wooden Toy (10 Sets) 10 51 Soft Building Blocks Soft Building Blocks For Kids Diy Squigz Sucker Funny Silicone Blocks Education Toy (10 Sets) 10 52 Mushroom Nail Tall Stackers 25pcs Mushroom Nail Tall Stackers Peg Fine Motor Skills Toys Montessori Toys For Kids (10 Sets) 10 53 Shape Sorter Educ Toys Shape Sorter Educational Toy Montessori Toys Learning Toys Baby Geometric Shape Classification Box (10 Sets) 10 54 Laminating Machine A3/a4 Laminator Machine Hot/cold/reverse 220v Heavy Duty Laminating Machine Hot And Cold Laminator 5 55 Laminating Film Quaff Laminating Film Long Size 250microns 100sheets 5 56 Mirror Aluminum Frame (thickness 1/4 Inch X 4 X 8 Ft) 1 57 Mixing Bowl Stainless Steel 18 Cm/7 Inch 20 58 Mixing Bowl Stainless Steel 22 Cm/8.6 Inch 20 59 Mixing Bowl Stainless Steel 28 Cm/ 11 Inch 10 60 Mixing Bowl Stainless Steel 30 Cm/11.8 Inch 10 61 Flat Sheet Baking Tray Flat Sheet Aluminum Alloy 8x12 (0.14 Mm Thick) 8 62 Flat Sheet Baking Tray Flat Sheet Aluminum Alloy 9x13 (0.14 Mm Thick) 8 63 Flat Sheet Baking Tray Flatsheet Aluminum Alloy 10x14 (0.14 Mm Thick) 10 64 Round Cake Pan Round Cake Pan Aluminum Alloy 011 Gauge 4x3 10 65 Round Cake Pan Round Cake Pan Aluminum Alloy 011 Gauge 5x3 8 66 Round Cake Pan Round Cake Pan Aluminum Alloy 011 Gauge 6x3 8 67 Round Cake Pan Round Cake Pan Aluminum Alloy 011 Gauge 8x3 8 68 Square Pan Square Molder Cake/brownie Pan Aluminum Alloy 011 Gauge 4x4x2 8 69 Square Pan Square Molder Cake/brownie Pan Aluminum Alloy 011 Gauge 5x5x2 8 70 Square Pan Square Molder Cake/brownie Pan Aluminum Alloy 011 Gauge 6x6x2 8 71 Square Pan Square Molder Cake/brownie Pan Aluminum Alloy 011 Gauge 8x8x2 8 72 Loaf Pan/ Bread Cake Molder Loaf Pan/ Bread Cake Molder Aluminum Alloy 011 Gauge 6x3x 2 1/2 6 73 Loaf Pan/ Bread Cake Molder Loaf Pan/ Bread Cake Molder Aluminum Alloy 011 Gauge 7x3x 2 1/2 6 74 Loaf Pan/ Bread Cake Molder Loaf Pan/ Bread Cake Molder Aluminum Alloy 011 Gauge 8x3x 2 1/2 6 75 Cooling Rack Stainless Steel Non-stick Grid Tray Cake Rack/cooling Rack 25cmx27 Cm 20 76 Cooling Rack Stainless Steel Non-stick Grid Tray Cake Rack/cooling Rack 25cmx 40 Cm 20 77 Baking Tray Rack 6 Layer Baking Tray Rack (commercial) Thick Stainless Steel 7.5 Cm Ceiling Height/ 40x60 Cm Oven Size 2 78 Baking Tray Rack 12 Layer Baking Tray Rack (commercial) Stainless Steel 7.5 Cm Ceiling Height/ 40x60 Cm Oven Size 2 79 Baking Mixer Heavy Duty Commercial Stainless Steel Mixer 10 L (dough 1.5 Kg) 3 80 Work Bench 3-layer Stainless Steel Preparation Table Double Deck 180 X 60 X 80 Cm 3 81 Rolling Pin Wooden Rolling Pin For Baking 10 82 Piping Tip Decorating Icing 83 Pc. Set Piping Tips For Cake Decorating Icing With Nozzle Piping Bags 10 83 Espresso Machine Breville Barista Express Espresso Machine With Built-in Coffee Grinder And Milk Froth 2 84 5.0 Kg/0.1 G Digital Weighing Scale 5.0 Kg/0.1 G Digital Weighing Scale For Coffee/food With Timer 10 85 Kitchen Chopping Board "plastic Kitchen Chopping Board Set (color Coded: Blue, White, Green, Yellow)" 5 86 Blender "commercial Use Blender /heavy Duty Multi-purpose Blender 3 • 500 Watts Power • 25,000 Rpm Rotation Speed Motor • 1.5l High Capacity Glass Jar • Detachable Jar For Easy Cleaning • 6-point Stainless Steel Sus304 Blades • Auto-off Safety Switch When Jar Is Not On Place • With Rotary Knob For Variable Speed • With Led Lights Display • With 3 Quick Preset Functions: Smoothie, Pulse/clean & Ice Crush • Overheat And Over Current Double Protection • With Double Oil Seals And Bearings • Soft Start Program • With Airtight Lid • Stainless Steel Housing Shell Base • Anti-slip Base • With Power Cable Organizer • Ideal For Crushing Ice, Making Smoothies, Milkshakes, Cocktails And Etc. Dimensions: (l)17 X (w)17 X (h)43 Cm" 87 Saucers Set Of 6 Bread And Butter Plates (6 Inches Diameter) Material: Porcelain 10 88 Spatula Baking Spatula Silicon Material Length 28.2 Cm Width 5.4 Cm 20 89 Revolving Cake Stand Alluminum Alloy Revolving Cake Stand (12 Inches Diameter) 10 90 Whisk 12 Inches Heavy Duty Staineless Steel Wire Whisk 20 91 Dough Scraper Stainless Steel Dough Scraper With Scale Patry Scraping 20 92 Offset Spatula "set Of Stainless Steel Spatula For Icing Scraping 8"", 6"" And 4.5""" 20 93 Measuring Cup "7 Pieces With A Convenient 1/8 Coffee Scoop; Complete Set Of 7with Pouring Lip, Sizes Include 1/8, 1/4, 1/3, 1/2, 2/3, 3/4 And 1 Cup, Food Grade Material Of Stainless Steel, Dishwasher Safe," 2 94 Measuring Spoon "sizes: 1/8tsp (0.63ml),1/4tsp (1.25ml),1/2tsp (2.5ml), 1 Tsp(5ml), 1/2tbsp (7.5ml),1 Tbsp (15ml), High Quality Stainless Steel, Dishwasher Safe" 2 95 Milk Frother Handheld Battery Type Milk Frother For Coffee 5 96 Flour Sifter Manual Fine Mesh Stainless Steel Flour Sifter 40x8.5 Cm Diameter 10 97 Chiller Refrigerator Fujidenzo 10 Cu/ft Showcase Chiller With Freezer Top 1 98 Mugs 11 Oz White Ceramic Mugs 25 99 Plates "set Of Ceramic Plates- 11'', 9'', 6'' In Diameter" 50 100 Cookie Press Cutter 13 Pc. Set Cookie Press Cutter/maker 20 101 Cookie Molders 12 Pc/set Assorted Shapes Stainless Steel Cookie Molders 25 102 Glass 6 Pc/set Champagne/flute Wine Glass 6 Oz Capacity 12 103 Coffee Maker Hanabishi Coffee Maker Good For 12 Cups 4 104 Cup And Saucer 6 Pcs./set Ceramic White Coffee Cup And Saucer 4 105 Small Table With Chairs "kindergarden Table Heavy Duty - 50 Metal Legs 60cm X 120 Cm X 55 Cm Ht Php 2,500.00 Blue Color Rectangular Table 24x48 Php 2000 Chairs 34cm D X 35 Cm L X 28 Cm Ht X 52 Cm Total Ht. Php 400 .00 (4 Chairs)" 106 6 Seater Dining Table Material: Mahogany Wood With Glass Top 2 107 Sofa Sala Set Sala Set Black Leather Sofa With Glass Table Uratex Foam- Green 1 108 Double Door Refrigerator Carrier Refrigerator Two Door Top Freezer 20 Cu.ft 1 109 Pillows "pillow Shape: Rectangle -10 Pillow Weight: 0.95-1000 Grams Pillow Height: 12.7cm Pillow Width: 40.64cm Pillow Length: 66.04cm Pillow Size: 40 X 66 Cm Pillow Material: 100% Cotton Pillow Filing: Cotton Poly-fiber" 110 Pillowcase "2pcs Pillowcase Size: 1 X 28 Inches Material: Cotton & Polyester" 10 111 Blankets "100% Canadian Cotton, Soft Texture, High Quality Fabric Size: 52 X 90 Inch" 10 112 Double Broiler Steamer "2 Layer Stainless Steel Steamer Pot Large Capacity Soup Pot With Double Boilers Stockpot Cookware Cooking Tools Feature: Eco-friendly Model Number: Stainless Steel Thicken 2 Layer Steamer Pot Layers: Double Type: Double Boilers Sheet Size: 28cm Material: Stainless Steel Specification: Name: Steamer Pot Material: Stainless Steel Size: Thickened Double Steamer Pot-28cm/11.02inch Packing List: Steamer Pot*1" 2 113 Food Thermometer "weight: 80 G Dimensions: 218 X 34 X 20 Mm Operating Temperature: -20 To +50 °c Product-/housing Material: Abs Protection Class: Ip67 With Topsafe Product Colour: White Length Probe Shaft: 55 Mm Length Probe Shaft Tip: 17 Mm Diameter Probe Shaft: 3 Mm Diameter Probe Shaft Tip: 2.3 Mm Standards: En 13485 Battery Type: 3v Button Cell (cr 2032) Battery Life: 350 H Display Type: Lcd (liquid Crystal Display) Display Size: One-line Display Lighting: No Storage Temperature: -40 To +70 °c Temperature – Ntc Measuring Range: -50 To +275 °c Accuracy: ±1 % Of Mv (+100 To +275 °c) ±0.5 °c (-30 To +99.9 °c) ±1.0 °c (-50 To -30.1 °c) Resolution: 0.1 °c Reaction Time: T?? = 10 S (measured In Moving Liquid) Measuring Rate: 0.5 S" 4 114 Bread Toaster "2 Bread Toaster Includes Removable Crumb Tray For Cleaning Cancel, Reheat, Defrost Button Includes Bun Burner Variable Heating Control" 2 115 Kitchen Knife Set "5 Pieces Kitchen Knife Set Chef Knives Fruit Stainless Steel Knife Sharpener Rod Peller Scissors Pairing Tools Specifications: Item Name: Kitchen Knife Set Main Material: 3cr13 Stainless Steel Quantity: Note: Please Kindly Note That There Could Be A Few Deviations As The Result Of Manual Measurement. Thank You Package Information: Package Size: 31 * 28 * 2.5cm / 12.3 * 11.2 * 0.98in Package Weight: 700g Package List: 2 * Chef Knife 1 * Chopping Knife 1 * Knife Sharpener 2 * Fruit Knife 1 * Scissors 1 * Peeler" 116 Fire Extinguisher Fire Extinguisher 10lbs Abc Dry Chemical Refillable 10 117 Signage Panaflex Signage 10x2 1 118 Table Knife Stainless Steel Table Knife 10 119 Washing Machine Samsung 16 Kg Twin Tub Washing Machine 1 120 Frying Pan Flat-bottomed Stainless Steel Pan 12 Inches Diameter 5 121 Commercial Use Rice Cooker Kyowa 10l Capacity Rice Cooker With Aluminum Inner Pot/ Stainless Steel Cover 2 122 Rice Cooker "kyowa 1.8l, Non-stick Inner Pot Stainless Steel Cover With Inner Tray" 2 123 Electric Water Kettle Hanabishi 1.9l Stainless Steel Water Heater Electric Kettle 4 124 Vanity Mirror Table Set Vanity Dresser With Mirror And Chair With 80x30x140 Dimensions 1 125 Carpet European Carpet 120x160 Cm Brown Or Green Color 2 126 Flat Screen Tv "tcl 40 Inch Fhd Smart Android Tv - 40s5400a (google Assistant, Netflix, Youtube, Voice Remote)" 2 127 Lampshade Dimmable Nordic Style Night Lamp Desktop Table Lampshade Bedside Lamp Shade (cylinder) 2 128 Dishrack "orocan Kitchen Queen Dish Rack Cabinet, Dish Drainer, Dish Organizer" 2 129 Charger Plate "charger Plate | Elegant Charger Plates Gold Embossed Pvc 13 Inches Diameter, Plastic Tray, Table Set Up, Dining Table" 10 130 Glass 12 Pc/set Water Glasses 11 Oz. Capacity 5 131 Soup Bowls "6 Pcs./set Ceramic Bowls 6""- 36 Oz. Bowl Capacity" 5 132 Waffle Maker Hanabishi Belgian Waffle Maker Hsm90w 2 133 Food Steamer/warmer Hanabishi Food Steamer Hfs55 3 Level With Free Plastic Container 2 134 Donut Maker - 2 Electric Donut Makers 220v 1400w Non-stick Egg Cake Bread Baking Machine For Children Snacks Desserts Breakfast Makes 16 Donuts 135 Pastry Roller Machine "commercial Dough Roller Machine Stand Type Stainless Steel Power : 2.2kw (3hp) Voltage : 220v 60hz Production : 100kgs/hr Speed : 134rpm Weight : 117kgs Roller Length : 30cm (12inches)" 1 136 Pasta Maker Machine Stainless Steel Pasta Making Machine Noodle Maker Size : 150mm Adjustable Thickness Settings The Pasta Maker Machine Comes With 8 Customized Adjustable Thickness Settings And 2 Width Choose For Making Various Vermicelli (2.0mm) / Fettuccine (4.0mm) 2 137 Magnifying Glass Handheld Magnifying Glass Instrument For Reading 10 138 Bookstand Material: Wood / Book Holder Stand/ Adjustable 10 139 Abacus Reizen Abacus For The Blind 10 140 Cane For Blind Red White Folding Mobility Cane For Blind And Visually Impaired 25 141 Magnetic Building Blocks 130 Pcs./set Magnetic Building Blocks 6 142 Circle Hoops 10 Pcs./set Kids Outdoor Toy Hopscotch Jumping Ring Cirlce 10 143 Wooden Beads "montessori Wooden Beads Sequencing Toy Set, Stacking Blocka And Lacing Beads With Matching Shape Set" 20 144 Laundry Basket "mg 513 Laundry Basket W Handle 36lw X H X L (color By Basket: 1xwhite, 1xbeige, 1xgrey, 1xblack) 41cm X 45cm X 41cm" 4 145 Android Tablet "samsung Tablet Galaxy Tab A9 64gb-4gb Galaxy Tab A9's Thickness Is 8.0mm/ Screen Size Is 8.7""/ 1. Tablet | 2. Data Cable (c Type) | 3. Eject Pin" 15 146 Water Dispenser Hanabishi Bottom Loading Water Dispenser Hfswd-1900bl Black 3 147 Office Table "alyson Office Table Available In 2 Colors, Oak, And Walnut. Comes With 3drawer Mobile Pedestal And A Cpu Stand /width: 120 Cm Depth: 60 Cm Height: 76 Cm/ Table Top & Drawer Front: Mdf Side Panel & Support: Particle Board/ Top: 60 Kgs Drawer/shelf: 5 Kgs" 8 148 Office Chair "executive Chair Ht-7081a Mesh High Back Gray/ Color: Gray Dimensions: 61(w) X 58(d) X 109-123(h) Cm Weight: 15kgs Weight Capacity: 100kgs" 8 149 Stainless Milk Coffee Pitcher "stainless Steel Milk Jug Serving Pitcher / Material: Stainless Steel Color: 350ml: Top Diameter: Approx. 67mm/ 2.64inch Base Diameter: Approx. 78mm/ 3.07inch Height: Approx. 93mm/ 3.66inch 500ml: Top Diameter: Approx. 78mm/ 3.07inch Base Diameter: Approx. 91mm/ 3.58inch Height: Approx. 111mm/ 4.37inch" 6 150 Trampoline With Handrail "40-inch Jumping Surface Area Handrail Adjusts From 28.5"" To 36.5""h 16lbs. Holds Up To 300 Lbs" 5 151 Camera Dslr Eos 4000d 2

Details: Description Invitation To Bid For Supply, Delivery And Installation Of Furniture And Fixtures Ib No. 2024-10-017-g The Western Visayas Sanitarium And General Hospital, Through Its Bids And Awards Committee (bac), Invites Suppliers/manufacturers/distributors To Apply For Eligibility And To Bid For The Hereunder Project: Name Of Project : Supply, Delivery And Installation Of Furniture And Fixtures Location : Western Visayas Sanitarium And General Hospital Approved Budget For : Php 999,900.00 The Contract (abc) Fund Source : Caf No. 2024-048-igf Delivery Period : Within Thirty (30) Working Days After Receipt Of The Notice To Proceed. Line Items: Supply, Delivery And Installation Of Furniture And Fixtures Abc: Php 999,900.00 Item No. Qty. Unit Of Issue Description Abc 1 7 Sets Conference Table W/ Chairs. Brand New. General Description: Material: Tempered Glass. Table Top And Leatherette Seat. Color: Black And White. Size: 8-seater. Set Includes: 1 Table + 8 Chairs. Table Dimension: L65-68″ X W36-40″ X H30-32″. Chair Dimension: L17-19″ X W15-17″ X H37-39″. Warranty Within 6 Months. Php 175,000.00 2 14 Units Double Deck Bed. Brand New. General Description: Double Deck With 2 Pcs Foam Mattress. Material-metal. Metal Color -black. Double Deck Size -30-32x30-32x75-77 Inches. Foam Mattress Size -30-32x75-77x4-5 Inches. Dimension -l 78-80 X W 32-34 X H 58-60 Inches. Assembly Required. Warranty Within 6 Months. Php 163,800.00 3 7 Units Metal Cabinet. Brand New. General Description: Comes With Two Adjustable Shelves Within The Upper Glass Door And One Adjustable Shelf Inside The Lower Metal Door. Users Can Move The Shelf To Suit Their Needs. Each Door Set Comes With One Lock And Two Keys. The Classic And Elegant Design Fits Nicely In A Range Of Home Settings, Including The Dining Area, Kitchen, And Living Room. Use It As A Bookcase, Kitchen Storage, Or Living Area Showcase Cabinet. Width: 90-95cms, Depth: 40-45 Cms, Height: 180-190 Cms. Color-beige. Product Weight -40-45 Kgs. Assembly -required. Materials -0.70 To 0.80mm Cold Rolling Steel Sheet, Coated With Epoxy Powder. Weight Capacity -40-50 Kgs/shelf. Sliding Door. Warranty Within 6 Months. Php 105,000.00 4 7 Units Metal Public Chair. Brand New. General Description: Thoughtfully Designed With Three Durable Seats Made Of Cold-rolled Steel, Providing A Sturdy And Secure Seating Solution For Use In Public Spaces. Measurement: Width -170-180 Cm, Depth -65-70cm, Height -85-90 Cm. Material Cold-rolled Steel With Cushion. Color -silver Or Gray. Product Weight -30-35 Kgs. Weight Capacity –at Least 900 Kgs. Assembly -required. Warranty Within 6 Months. Php 78,400.00 5 74 Pcs Monobloc Chairs. Brand New. General Description: Dimension: Seat Width: 373-375 Mm. Seat Depth: 330-335 Mm. Front Legs Distance: 353-355 Mm. Side Legs Distance Left: 375-378 Mm. Side Legs Distance Right: 375-378 Mm. Back Legs Distance: 210-212 Mm. Back Rest Height: 779-800 Mm. Seat Back Height: 405-407 Mm. Seat Height: 376-378 Mm. Gross Weight: 2-3 Kgs. Color- Black. Warranty Within 6 Months. Php 37,000.00 6 7 Sets Office Head Chair. Brand New. General Description: Butterfly Mechanism. Adjustable Seat Height. Swivel 360 Degrees. Tilt Locking At 90-135 Degrees Angle. This Office Low-back Chair Is A Popular Choice For Delivering Both Comfort And A Professional Appearance And Support Throughout Lengthy Periods Of Sitting. Measurements: Width 65-70cm, Depth -65-68 Cm, Height -99-106 Cm, Seat Height -48-50cm. Materials: Seat & Backrest: Plywood + Foam Covered With Pu Faux Leather. Armrest: Polypropylene (pp) Plastic Covered With Pu Faux Leather. Gas Lift: Metal Tube In Chrome Plated Finish. Star Base: Metal Tube In Chrome Plated Finish. Wheel Caster: Nylon. Color -black. Weight Capacity -able To Carry 120 Kgs. Assembly Required. Php 66,500.00 7 8 Units Office Head Table. Brand New. General Description: Comes With 3 Drawer Mobile Pedestal And A Cpu Stand. Measurement: Width 115-125 Cms, Depth -60-65 Cms, Height -74-76cms. Materials -table Top And Drawer Front -mdf, Side Panel And Support -particle Board. Color -walnut Or Oak. Weight Capacity -able To Carry 60 Kgs (top), Drawer/shelf-5 Kgs. Assembly Required. Php 60,000.00 8 20 Pcs Office Visitor Chair. Brand New. General Description: Measurement: Width -57-60cm, Depth -50-54cm, Height - 78-82cm, Seat Height - 44-46cm. Materials: Seat & Backrest: Plywood + Foam Covered With Mesh Fabric. Armrest: Polypropylene (pp) Plastic. Frame & Leg: Metal Tube In Chrome Plating Finish. Color -black. Weight Capacity -able To Carry 100 Kgs. Assembly Required. Php 45,000.00 9 7 Units Office Secretary Table. Brand New. General Description: Comes With 2 Drawers That Are Great For Office Supplies, Charging Cords, And Extra Papers. Plus, This Desk Has A Finished Back, So It Looks Just As Good Up Against A Wall Or In The Center Of The Room. Fully Laminated Back Panel That Looks Just As Good Up Against The Wall Or In The Center Of The Room. Measurements: Width -96-104cm, Depth -46-50cm, Height -75-80cm. Material: Table Top & Panels: 15-16 Mm Particle Board. Legs: 20-22 X 20-22 X 0.8-1.0 Mm Steel Tubes In Black Powder Coated Finish. Color -oak Or Black Walnut. Product Weight -18-20 Kgs. Weight Capacity -able To Carry 50 Kgs Table Top. Assembly Required. Warranty Within 6 Months. Php 33,600.00 10 7 Pcs Office Secretary Chair. Brand New. General Description: Extra Padding For Soft Seating. Adjustable Seat Height. Swivel 360 Degrees. Floor Friendly Caster. Measurements: Width: 40-42cm, Depth: 50-52cm, Height: 79-87 Cm, Seat Height: 48-57 Cm. Materials: Back Rest: Wood Frame With 24d Foam With Extra Padding. Seat: Wood Frame With 24d Foam With Extra Padding. Gas Lift: All Chrome 80mm Class3. Base: Tiger Claw Matt Black 280mm. Wheel Caster: Φ50mm, 13 Caliber Nylon Wheel. Color Light Brown. Product Weight -6-7kgs. Weight Capacity -able To Carry 90 Kgs. Assembly Required. Warranty Within 6 Months. Php 28,350.00 11 7 Sets Pantry Table And Chairs. Brand New. General Description: Built For Simple Dining Set-ups, Featuring A Robust Mdf Tabletop And Seats With A Wood-look Pvc Laminate. The Table And Bench Are Supported By Sturdy Metal Legs And Frames, Which Are Reliable, Simple, Yet Catchy. Measurements: Table -width: 120-125cm, Depth: 58-64cm, Height: 74-76cm, Bench -width: 100-105cm, Depth: 35-37cm, Height: 45-46cm. Materials: Table Top & Seat: Mdf (medium Density Fiberboard) Laminated In Pvc (polyvinyl Chloride). Frame & Legs: Metal Tube In Powder Coated Finish. Color: Oak. Frame And Legs -white Walnut. Panel -walnut. Frame And Legs -black. Weight Capacity: Table -able To Carry 50kgs, Chair -able To Carry 100 Kgs. Assembly Required. Warranty Within 6 Months. Php 68,250.00 12 4 Units Sofa. Brand New. General Description: Measurements-3 Seat, Width: 190-195 Cm, Depth: 75-77 Cm, Height: 90-93 Cm. Materials: Frame: Plywood & Gemelina Wood, Fixed Seat Cushion: Polyurethane Foam, Fixed Back Cushion: Polyurethane Foam, Fabric: 100% Polyester. Seat Type: Fixed Seat, Back Type: Fixed Back. Warranty Within 6 Months. Php 104,000.00 13 7 Units Television Stand (mobile). Brand New. General Description: Suitable For 32-80 Inch Television. Freely Adjustable Lift. Load-bearing (can Bear 150kg). Upper Lower Trays Enlarged Base. Product Material: Cold Rolled Steel (stainless Steel). Multi-functional Double Tray Set-top Boxes Cameras Audio-visual Devices Other Equipment. Meets 99- Brand Tv Sets. Curved Edge Design Base Surface Safety. Double Column Support Design Stable Shaking Anti-collision Anti-tilt. 360° Universal Silent Brake Wheel I.e. Push Stop. Triple Anti-drop Design. High-quality Cold-rolled Steel Classic Coating High-temperature Baking Durable Anti-corrosion Anti-rust. Warranty Within 6 Months. Php 35,000.00 The Bidder’s Single Largest Completed Contract Similar To The Contract To Be Bid Should Have Been Completed Within 3 Years From The Date Of The Deadline Of Submission And Receipt Of Bids. Likewise, The Contract Price Of The Slcc Should Be At Least 50% Of The Sum Of The Abc Of The Line Items Joined. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184. The Complete Schedule Of Activities Is As Follows: Bac Activities Schedule Availability Of Bidding Documents November 14, 2024 At 8:00 Am To 4:00 Pm Up To Before 9:00 Am Of November 22, 2024, At The Procurement/bac Office, Western Visayas Sanitarium And General Hospital, Sta. Barbara, Iloilo Pre Bid Conference None Opening Of Bids November 22, 2024 (friday), 9:00 Am At The 3rd Floor, Im Conference Room, New Building, Western Visayas Sanitarium And General Hospital, Sta. Barbara, Iloilo Bid Documents May Be Acquired By Interested Bidders On The Dates And Address Above And Upon Payment Of Applicable Fee For The Bidding Documents In The Amount Of Php 1,000.00. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Bac/procurement Office On Or Before 9:00 Am Of November 22, 2024. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Wvs.doh.gov.ph , Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Link: Meet.google.com/nwr-hssm-oqt The Western Visayas Sanitarium And General Hospital Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Mr. Jasond Rex A. Huyaban Bac Secretariat Western Visayas Sanitarium And General Hospital Sta. Barbara, Iloilo Tel. No.: (033) 332-4778 Loc. 119 Email: Wvsbac.procurement@gmail.com Website: Wvs.doh.gov.ph Renia Grace G. Salapare, Md, Fpafp, Mpa Medical Specialist Iii/bac Chairperson

Details: Description Republic Of The Philippines Department Of Health Western Visayas Sanitarium And General Hospital Santa Barbara, Iloilo Invitation To Bid For Supply, Delivery And Installation Of Furniture And Fixtures Ib No. 2024-10-013-g The Western Visayas Sanitarium And General Hospital, Through Its Bids And Awards Committee (bac), Invites Suppliers/manufacturers/distributors To Apply For Eligibility And To Bid For The Hereunder Project: Name Of Project : Supply, Delivery And Installation Of Furniture And Fixtures Location : Western Visayas Sanitarium And General Hospital Approved Budget For : Php 999,900.00 The Contract (abc) Fund Source : Caf No. 2024-048-igf Delivery Period : Within Twenty (20) Calendar Days After Receipt Of The Notice To Proceed. Line Items: Supply, Delivery And Installation Of Furniture And Fixtures Abc: Php 999,900.00 Item No. Qty. Unit Of Issue Description 1 7 Sets Conference Table W/ Chairs. Brand New. General Description: Material: Tempered Glass. Table Top And Leatherette Seat. Color: Black And White. Size: 8-seater. Set Includes: 1 Table + 8 Chairs. Table Dimension: L65-68″ X W36-40″ X H30-32″. Chair Dimension: L17-19″ X W15-17″ X H37-39″. Warranty Within 6 Months. 2 14 Units Double Deck Bed. Brand New. General Description: Double Deck With 2 Pcs Foam Mattress. Material-metal. Metal Color -black. Double Deck Size -30-32x30-32x75-77 Inches. Foam Mattress Size -30-32x75-77x4-5 Inches. Dimension -l 78-80 X W 32-34 X H 58-60 Inches. Assembly Required. Warranty Within 6 Months. 3 7 Units Metal Cabinet. Brand New. General Description: Comes With Two Adjustable Shelves Within The Upper Glass Door And One Adjustable Shelf Inside The Lower Metal Door. Users Can Move The Shelf To Suit Their Needs. Each Door Set Comes With One Lock And Two Keys. The Classic And Elegant Design Fits Nicely In A Range Of Home Settings, Including The Dining Area, Kitchen, And Living Room. Use It As A Bookcase, Kitchen Storage, Or Living Area Showcase Cabinet. Width: 90-95cms, Depth: 40-45 Cms, Height: 180-190 Cms. Color-gray Or White. Product Weight -40-45 Kgs. Assembly -required. Materials -0.70 To 0.80mm Cold Rolling Steel Sheet, Coated With Epoxy Powder. Weight Capacity -40-50 Kgs/shelf. Warranty Within 6 Months. 4 7 Units Metal Public Chair. Brand New. General Description: Thoughtfully Designed With Three Durable Seats Made Of Cold-rolled Steel, Providing A Sturdy And Secure Seating Solution For Use In Public Spaces. Measurement: Width -170-180 Cm, Depth -65-70cm, Height -85-90 Cm. Material Cold-rolled Steel With Cushion. Color -silver Or Gray. Product Weight -30-35 Kgs. Weight Capacity –at Least 900 Kgs. Assembly -required. Warranty Within 6 Months. 5 74 Pcs Monobloc Chairs. Brand New. General Description: Dimension: Seat Width: 373-375 Mm. Seat Depth: 330-335 Mm. Front Legs Distance: 353-355 Mm. Side Legs Distance Left: 375-378 Mm. Side Legs Distance Right: 375-378 Mm. Back Legs Distance: 210-212 Mm. Back Rest Height: 779-800 Mm. Seat Back Height: 405-407 Mm. Seat Height: 376-378 Mm. Gross Weight: 2-3 Kgs. Color- Black. Warranty Within 6 Months. 6 7 Sets Office Head Chair. Brand New. General Description: Butterfly Mechanism. Adjustable Seat Height. Swivel 360 Degrees. Tilt Locking At 90-135 Degrees Angle. This Office Low-back Chair Is A Popular Choice For Delivering Both Comfort And A Professional Appearance And Support Throughout Lengthy Periods Of Sitting. Measurements: Width 65-70cm, Depth -65-68 Cm, Height -99-106 Cm, Seat Height -48-50cm. Materials: Seat & Backrest: Plywood + Foam Covered With Pu Faux Leather. Armrest: Polypropylene (pp) Plastic Covered With Pu Faux Leather. Gas Lift: Metal Tube In Chrome Plated Finish. Star Base: Metal Tube In Chrome Plated Finish. Wheel Caster: Nylon. Color -black. Weight Capacity -able To Carry 120 Kgs. Assembly Required. 7 8 Units Office Head Table. Brand New. General Description: Comes With 3 Drawer Mobile Pedestal And A Cpu Stand. Measurement: Width 115-125 Cms, Depth -60-65 Cms, Height -74-76cms. Materials -table Top And Drawer Front -mdf, Side Panel And Support -particle Board. Color -walnut Or Oak. Weight Capacity -able To Carry 60 Kgs (top), Drawer/shelf-5 Kgs. Assembly Required. 8 20 Pcs Office Visitor Chair. Brand New. General Description: Measurement: Width -57-60cm, Depth -50-54cm, Height - 78-82cm, Seat Height - 44-46cm. Materials: Seat & Backrest: Plywood + Foam Covered With Mesh Fabric. Armrest: Polypropylene (pp) Plastic. Frame & Leg: Metal Tube In Chrome Plating Finish. Color -black. Weight Capacity -able To Carry 100 Kgs. Assembly Required. 9 7 Units Office Secretary Table. Brand New. General Description: Comes With 2 Drawers That Are Great For Office Supplies, Charging Cords, And Extra Papers. Plus, This Desk Has A Finished Back, So It Looks Just As Good Up Against A Wall Or In The Center Of The Room. Fully Laminated Back Panel That Looks Just As Good Up Against The Wall Or In The Center Of The Room. Measurements: Width -96-104cm, Depth -46-50cm, Height -75-80cm. Material: Table Top & Panels: 15-16 Mm Particle Board. Legs: 20-22 X 20-22 X 0.8-1.0 Mm Steel Tubes In Black Powder Coated Finish. Color -oak Or Black Walnut. Product Weight -18-20 Kgs. Weight Capacity -able To Carry 50 Kgs Table Top. Assembly Required. Warranty Within 6 Months. 10 7 Pcs Office Secretary Chair. Brand New. General Description: Extra Padding For Soft Seating. Adjustable Seat Height. Swivel 360 Degrees. Floor Friendly Caster. Measurements: Width: 40-42cm, Depth: 50-52cm, Height: 79-87 Cm, Seat Height: 48-57 Cm. Materials: Back Rest: Wood Frame With 24d Foam With Extra Padding. Seat: Wood Frame With 24d Foam With Extra Padding. Gas Lift: All Chrome 80mm Class3. Base: Tiger Claw Matt Black 280mm. Wheel Caster: Φ50mm, 13 Caliber Nylon Wheel. Color Light Brown. Product Weight -6-7kgs. Weight Capacity -able To Carry 90 Kgs. Assembly Required. Warranty Within 6 Months. 11 7 Sets Pantry Table And Chairs. Brand New. General Description: Built For Simple Dining Set-ups, Featuring A Robust Mdf Tabletop And Seats With A Wood-look Pvc Laminate. The Table And Bench Are Supported By Sturdy Metal Legs And Frames, Which Are Reliable, Simple, Yet Catchy. Measurements: Table -width: 120-125cm, Depth: 58-64cm, Height: 74-76cm, Bench -width: 100-105cm, Depth: 35-37cm, Height: 45-46cm. Materials: Table Top & Seat: Mdf (medium Density Fiberboard) Laminated In Pvc (polyvinyl Chloride). Frame & Legs: Metal Tube In Powder Coated Finish. Color: Oak. Frame And Legs -white Walnut. Panel -walnut. Frame And Legs -black. Weight Capacity: Table -able To Carry 50kgs, Chair -able To Carry 100 Kgs. Assembly Required. Warranty Within 6 Months. 12 4 Units Sofa. Brand New. General Description: Measurements-3 Seat, Width: 190-195 Cm, Depth: 75-77 Cm, Height: 90-93 Cm. Materials: Frame: Plywood & Gemelina Wood, Fixed Seat Cushion: Polyurethane Foam, Fixed Back Cushion: Polyurethane Foam, Fabric: 100% Polyester. Seat Type: Fixed Seat, Back Type: Fixed Back. Warranty Within 6 Months. 13 7 Units Television Stand (mobile). Brand New. General Description: Suitable For 32-80 Inch Television. Freely Adjustable Lift. Load-bearing (can Bear 150kg). Upper Lower Trays Enlarged Base. Product Material: Cold Rolled Steel (stainless Steel). Multi-functional Double Tray Set-top Boxes Cameras Audio-visual Devices Other Equipment. Meets 99- Brand Tv Sets. Curved Edge Design Base Surface Safety. Double Column Support Design Stable Shaking Anti-collision Anti-tilt. 360° Universal Silent Brake Wheel I.e. Push Stop. Triple Anti-drop Design. High-quality Cold-rolled Steel Classic Coating High-temperature Baking Durable Anti-corrosion Anti-rust. Warranty Within 6 Months. The Bidder’s Single Largest Completed Contract Similar To The Contract To Be Bid Should Have Been Completed Within 3 Years From The Date Of The Deadline Of Submission And Receipt Of Bids. Likewise, The Contract Price Of The Slcc Should Be At Least 50% Of The Sum Of The Abc Of The Line Items Joined. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184. The Complete Schedule Of Activities Is As Follows: Bac Activities Schedule Availability Of Bidding Documents November 4, 2024 At 8:00 Am To 4:00 Pm Up To Before 9:00 Am Of November 25, 2024, At The Procurement/bac Office, Western Visayas Sanitarium And General Hospital, Sta. Barbara, Iloilo Pre Bid Conference November 12, 2024 (tuesday), 9:00 Am At The 3rd Floor, Im Conference Room, New Building, Western Visayas Sanitarium And General Hospital, Sta. Barbara, Iloilo Opening Of Bids November 25, 2024 (monday), 10:00 Am At The 3rd Floor, Im Conference Room, New Building, Western Visayas Sanitarium And General Hospital, Sta. Barbara, Iloilo Bid Documents May Be Acquired By Interested Bidders On The Dates And Address Above And Upon Payment Of Applicable Fee For The Bidding Documents In The Amount Of Php 1,000.00. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Bac/procurement Office On Or Before 10:00 Am Of November 25, 2024. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Wvs.doh.gov.ph , Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. Link: Meet.google.com/nwr-hssm-oqt The Western Visayas Sanitarium And General Hospital Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Mr. Jasond Rex A. Huyaban Bac Secretariat Western Visayas Sanitarium And General Hospital Sta. Barbara, Iloilo Tel. No.: (033) 332-4778 Loc. 119 Email: Wvsbac.procurement@gmail.com Website: Wvs.doh.gov.ph Renia Grace G. Salapare, Md, Fpafp, Mpa Medical Specialist Iii/bac Chairperson

Details: Description Supply Of Various Simulation Equipment For Clinical Simulation Laboratory Pelvic Simulator With Virtual System Specifications ● Enhance Knowledge Of Pelvic Anatomy And Acquire The Comprehensive Skills Required To Accurately Perform Pelvic Exams ● Combines A Physical Mannequin With A Computerized 3d Virtual System ● Sensors Are Placed On The Trainee’s Fingers Which Are Used In Conjunction With The Mannequin And 3d Virtual Model ● Provides Real-time Indication Of Finger Palpation, Downward Press On The Abdomen And Cervix Manipulation ● Interchangeable Anatomies Are Easily Replaced To Represent Normal And Pathological Anatomical Structures ● Comes With A Height-adjustable Cart ● Curriculum Videos Included For Online Learning And Self-instruction ● Self-learning With Skill And Procedural Tasks ● Anatomical Labeling, Organ Recognition System ● Palpation Or Movement Is Reflected To Provide A True-to-life Image Of Internal Pelvic Actions ● Anatomical Software Customization: Allows Learner To Choose The Anatomies And Content To Be Included In The Training Or Testing Session ● Performance Reports/ Metrics At The End Of Each Training Session Allow The Learner And The Trainer To Review Practice Results Components: ● All-in-one Computer ● Mannequin ● Platform Base ● Finger Sensors ● Speculum And Interchangeable Pap Test Tool (interchangeable Pap Test Tool Includes Cytobrush And Cervical Broom) ● 6 Interchangeable Anatomical Units (normal Uterus, Ovarian Cyst, Multiparous Uterus, Large Fibroid, Ectopic Pregnancy, And Retroflexed Uterus) ● Control Unit ● Wireless Keyboard And Mouse ● Foot Pedal Display Cart Components: ● Computer Tray ● Keyboard And Mouse Tray ● Rotating Mannequin Table ● Table-height Adjustment Mechanism ● Control Unit Tray Simulation Processing Unit: ● Computer ● Windows Os-based ● At Least 22” Touch Screen Physical Dimensions: ● Platform Size: At Least 20.8”(l) X 18.8”(d) X 5.8”(h) ● Control Unit: At Least 15”(l) X 9.5”(d) X 4.8”(h) Electrical And Environmental Characteristics: ● 100-240 V~, 50/60 Hz, 3.2a ● Operation Temperature: Range 10-30°c ● Relative Humidity: Maximum 90%: ● Cloud Web-based Management System ● User Friendly Simulator And Curricula Administration ● Customize And Design Courses And Curricula ● Allows Learner Progress Monitoring And Setting Training Goals Modules: 1. Anatomical Recognition ● In The Module, The User Palpates The Anatomical Mannequin The Same Way It Is Done When Performing Pelvic Procedures On Live Patients ● The Realistic Physical Mannequin Provides The Trainee With A Very Accurate And True-to-life Palpation Sensation ● Customization Allows The Course Director To Choose The Relevant Anatomies And Content To Be Included In The Training Session ● Consists Of At Least Two (2) Modes: Anatomical Recognition Practice Mode And Anatomical Recognition Test Mode 2. Pelvic Exam ● Provided With Interchangeable Anatomies That Represent Different Exam Types ● These Anatomies Enable Trainees To Virtually Encounter And Learn Various Pelvic Conditions Before They Perform The Exam On A Live Patient ● Trainees Gain The Ability To Recognize Normal And Abnormal Gynecological Findings And Practice Using The Proper Techniques To Perform Pelvic Exams ● Dynamic Anatomical Behavior: The Palpated Organs In The Virtual Model On The Screen Move In Synchronization With The Mannequin, Allowing The Learner To Receive Real-time Feedback On Movements Inside The Pelvic Cavity ● Consists Of At Least Two (2) Modes: Pelvic Exam Practice Mode And Pelvic Exam Test Mode 3. Speculum Examination And Pap Test ● Includes A Self-guided Step-by-step And A Test Case For Cervix Examination Using A Speculum And Perform A Pap Test ● Use True-to-life Speculum And Pap Test Tools Including A Cytobrush And A Cervical Broom ● Connected To A Virtual Model, Trainee Can Track Patient Discomfort During Examination, Accuracy Of Tools Position And Receive Feedback Through The Performance Report ● Visualization Of Speculum And Pap Smear Tools In Virtual Anatomical Model Assist In Orientation ● Dynamic Anatomical Behavior: Vaginal Movement Is Reflected To Provide A True-to-life Image Of Internal Pelvic Actions Adult Auscultation Training Simulator Specifications For Training Different Heart, Lung And Bowel Sounds. The Sounds Library Conforms To American Thoracic Society Guidelines. ● At Least 35 Heart, 18 Lung And 12 Abdomen Sounds ● Anterior And Posterior Auscultation Points ● All Auscultation Points Light Up ● Transmit Sounds To External Speakers ● Compatible With A Real Stethoscope Challenge Assessment Skills From Clear Clinical Findings To Detecting Faint Murmurs. The Flexible Operating Tablet Allows You To: ● Activate Or Deactivate Auscultation Points And Backlighting Individually ● Adjust Volume And Intensity Of Sounds ● Change Hr And Rr For A Sound That Is Currently Being Reproduced ● Compare Sound Recordings ● Sound Matches Ecg Diagrams And Other Vital Parameters Cardiac Auscultation 1. Normal Heart Sound 2. Split First Heart Sound 3. Split Second Heart Sound 4. Third Heart Sound (gallop) 5. Fourth Heart Sound (gallop) 6. Functional Murmur 7. Diastolic Murmur 8. Opening Snap 9. Holosystolic Murmur 10. Early Systolic Murmur 11. Mid-systolic Murmur 12. Continuous Murmur 13. Austin Flint Murmur 14. Pericardial Rub 15. Graham Steel Murmur 16. Aortic Valve Regurgitation 17. Aortic Valve Stenosis 18. Aortic Stenosis And Regurgitation 19. Congenital Aortic Stenosis 20. Mitral Valve Regurgitation 21. Mitral Valve Stenosis 22. Mitral Valve Prolapse 23. Pulmonary Valve Stenosis 24. Pulmonary Valve Regurgitation 25. Tricuspid Valve Regurgitation 26. Coarctation Of The Aorta 27. Hypertrophic Cardiomyopathy 28. Patent Ductus Arteriosus 29. Atrial Septal Defect 30. Ventricular Septal Defect 31. Acute Myocardial Infarction 32. Congestive Heart Failure 33. Systemic Hypertension 34. Acute Pericarditis 35. Dilated Cardiomyopathy Auscultation Of Lungs 1. Bronchial Breath Sounds 2. Bronchovesicular Sounds 3. Vesicular Breath Sounds 4. Diminished Vesicular Breath Sounds 5. Coarse Crackles 6. Fine Crackles 7. Wheezes 8. Rhonchi 9. Gurgling Rales 10. Stridor 11. Pleural Friction Rub 12. Cavernous Breath Sound 13. Abnormal Harsh Bronchovesicular Breath Sounds 14. Asthma 15. Covid-19 16. Left-sided Pneumothorax 17. Right-sided Pneumothorax 18. Pneumonia Abdomen Auscultation 1. Normal Bowel Sound 2. Hyperactive Sounds 3. Hypoactive Sounds 4. Borborygmus 5. Capotement 6. Peritoneal Friction Rub 7. Normal Bowel Sound With Bruits 8. Irritable Bowel Syndrome 9. Diarrhea 10. Ulcerative Colitis 11. Crohn’s Disease 12. Functional Intestinal Obstruction 13. Paralytic Ileus Bluetooth Compatible Adult Full-body Resuscitation Manikin Specifications A Full-body Cpr Manikin With A Rechargeable Battery, Designed To Represent A Standard Adult Cardiac Arrest Patient (in Terms Of Required Chest Compression Force). It Simulates An Adult Of Average Physiology And Is Designed For Realistic Training In Basic Life Support Techniques Following International Recommendations. ● High-performance Cpr Training For Professional First Responders ● The Airway (aw) Head Is Designed For Supraglottic (sg) Intubation Supporting The Protocol For Doing Endotracheal (et Or Eti) Intubation In A Resuscitation Team Training Setting ● The Aed Skin Includes A Connector To Real And Simulated Aed Trainers, Enabling Aed Trainings In A Resuscitation Team Training Setting ● Enables Resuscitation Team Training Or Skills Training ● Erc, Aha And Srfac Guidelines Compliant Cpr Real Time Feedback To: ● Compression Depth, Rate, Release ● Ventilation Volume And Hand Placement ● Improvement Hints And Guided Debrief ● Multiple Chest Stiffnesses With Qcpr Feedback Device Includes: ● Full Body Manikin With Rechargeable Battery (1) ● Trolley Bag (1) ● 45kg Compression Spring Installed (1) ● 2 Extra Compression Springs (30kg And 60kg) (1) ● Training Pads Multi (1) ● Manikin Wipes Pkg (4) ● Important Product Information (1) ● User Guide (1) ● Airway Assemblies (2) ● Usb A-c (1) ● Ac Power Adapter Usb 2a (1) Bluetooth Compatible Child Full-body Resuscitation Manikin Specifications A Professional-grade Pediatric Cpr Manikin Designed To Represent A 5–6-year-old Boy, Which Enables Professional First Responders To Practice Cpr Skills And High-performance Team Training. The Manikin Is Bluetooth Enabled For Qcpr Feedback Device. ● Enables Resuscitation Team Training Or Skills Training ● Erc, Aha And Srfac Guidelines Compliant Cpr Real Time Feedback To: ● Compression Depth, Rate, Release ● Ventilation Volume And Hand Placement ● Improvement Hints And Guided Debrief With Qcpr Feedback Device Includes: ● Full-body Manikin With Jacket And Shorts ● Soft Carry Case That Doubles As Training Mat ● Pulse Bulb ● Manikin Wipes ● Face Masks ● At Least 2 Junior Airways ● Product Information ● User Guide ● At Least 2 Airway Assemblies, Usb A-c ● Ac Power Adapter Usb 2a ● 4 Aa Size Batteries Bluetooth Compatible Infant Full-body Resuscitation Manikin Specifications A Professional-grade Infant Cpr Manikin Designed To Represent A 3-month-old Baby, Which Enables Professional First Responders To Practice Cpr Skills And High-performance Team Training. The Manikin Is Bluetooth Enabled For Qcpr Feedback Devices. ● Facilitates Resuscitation Team Training Or Skills Training ● Erc, Aha And Srfac Guidelines Compliant Cpr Real Time Feedback For: ● Compression Depth, Rate, Release ● Ventilation Volume And Hand Placement ● Improvement Hints And Guided Debrief With Qcpr Feedback Device Includes: ● Full-body Manikin With Onesie Clothing And Rechargeable Battery ● Carry Case 20 L ● Pulse Bulb ● At Least 5 Disposable Airways ● 2 Baby Standard Head Face Skins ● Manikin Wipes ● Baby Blanket ● Qcpr Armband ● Product Information ● User Guide ● At Least 2 Airway Assemblies ● Usb A-c ● Ac Power Adapter Usb 2a Blood Pressure Measurement Trainer Specifications Lifelike, Adult Arm With An Electronic Trainer Designed For Training The Procedure Of Nibp Measurement. ● Palpable Antecubital Pulse ● Blood Pressure Trainer With Lcd Guided Operation ● Systolic, Diastolic, Heart Rate And Auscultatory Gap Are Programmable ● Representation Of Both Systolic And Diastolic Pressures ● Indication Of Gauge Reading As Pressure Is Increased Or Decreased ● Adjustable Volume Adult Airway Management Trainer Specifications ● Manually Inflatable Tongue To Simulate Obstructed Airway Or Tongue Edema ● Anatomically Correct Internal Anatomy Facilitates Airway Management Skills Using Manual Maneuvers And Mechanical Devices ○ Updated Airway Allows For Insertion Of Standard Airway Devices With The Addition Of The Lma, Combitube And King Lt ○ Oropharyngeal And Nasopharyngeal Airway Insertion ○ Endotracheal And Right Mainstem Intubation ○ Needle Or Surgical Cricothyrotomy ○ Retrograde Intubation ○ Bag-valve-mask Ventilation ○ Tracheal Suctioning Pediatric Airway Management Trainer Specifications ● Anatomically Accurate Airway ● Pediatric Torso ● Oropharyngeal And Nasopharyngeal Airway Insertion ● Endotracheal Tube Insertion And Securing ● Bag-valve Mask Ventilation ● Tracheal Suctioning ● Manually Generated Carotid Pulse ● Closed Chest Compressions Includes: ● 1 Pediatric Torso Trainer ● 1 Can Of Manikin Lubricant ● 1 Carry Case ● Directions For Use Infant Airway Management Trainer Specifications Realistic Anatomy Of A Three-month-old Infant For Teaching And Practicing Basic And Advanced Airway Management Skills. ● Realistic Representation Of Human Anatomy, Tissue, And Skin Material ● Allows Students To Undertake Training That Is Directly Transferable To The Clinical Setting ● Minimal Maintenance And Robust Design Enable Cost Effective Training ● A Base Plate Mount Allows Stable Practicing Conditions And Easy Transportation ● The Cover Prevents Dust From Coming Into Contact With The Head During Storage Product Features: ● Realistic Anatomy Of The Tongue, Oropharynx, Epiglottis, Larynx, Vocal Cords, And Trachea ● Practicing Of Oral And Nasal Intubation ● Practicing Use Of Lma (laryngeal Mask Airway) ● Correct Tube Placement Can Be Checked By Practical Inflation Test ● Bag-valve-mask Ventilation Can Be Practiced ● Sellick Maneuver Can Be Performed ● Stomach Inflation ● Realistic Tissue Simulation Leopold’s Maneuvers Task Trainer Specifications Comprehensive Maternal Body Set For Skills Training In Labor And Delivery. Combination Of Modules Offer A Variety Of Skills Training Features ● Realistic Reproduction Of The Birth Canal Allows For Pelvic Examination In Accordance With The Progress Of Delivery. ● The Ability To Perform Various Techniques (mcroberts Position, Woods Screw Method, Etc.) In Fetal Malposition And Shoulder Dystocia. Training Skills / Applications ● Delivery ● Pelvic Examination ● Normal Delivery ● Delivery Of Placenta And Umbilical Cord ● Reproduction And Handling Of Shoulder Dystocia And Fetal Malposition ● Vacuum Extraction ● Forceps Delivery ● Breech Delivery ● Delivery Of The Placenta ● Treatment Of The Fetus ● Umbilical Cord Entanglement ● Umbilical Cord Clamping And Cutting ● Palpation Of The Anterior/posterior Fontanels ● Suctioning Procedures Through Mouth And Nose Set Includes At Least The Following ● 1 Maternal Body ● 1 Skin Cover ● 2 Clamps ● 1 Fetus ● 1 Placenta ● 1 Umbilical Cord ● 3 Umbilical Cords For Omphalotomy ● 5 Velamen Sheets ● 1 Lubricant ● 1 Bottle For Lubricant ● 1 Talcum Powder ● 1 Towel ● 1 Instruction Manual Wound Care Task Trainer – Leg Specifications Wound Care Task Trainer Molded From An Actual Patient For True-to-life Realism. The Following Conditions* Are Presented: ● Venous Ulcers ● Cellulitis ● Stasis Dermatitis ● Varicose Veins ● Hemosiderin Staining Vasculitis ● Lipodermatosclerosis ● Calciphylaxis ● Pyoderma Grangrenosum ● Healed Foot Ulcer ● Fungal Thickened Toenails ● Maceration ● Diabetic Ulcer ● Atrophie Blanche ● Pitting Edema ● Reticular And Telangiectasia Veins. The Top Of The Leg Model Has A Unique Molded-in Swivel Fixture That Permits The Leg To Be Rotated A Full 360 Degrees For Easy Visualization. Wounds Associated With Venous Disease And Other Wounds On The Lower Leg And Foot Are Often Extremely Painful For The Patient, Thus Adding Urgency To Their Effective And Efficient Identification And Treatment. Includes A Display Stand Which Permits The Trainer To Pivot From Above The Knee And Rotate 360 Degrees, Providing A Realistic Experience In Supporting The Leg While Practicing Compression Wrapping, Dressing Changes Or Identifying Conditions In A Teaching Situation. Pediatric Iv Training Hand Specifications Set Of Pediatric Hands For Practicing Iv Features 1. Fingers And Dorsum Of Hand Are Flexible, Able To Be Gripped, And Repositionable As In Real-life Procedures 2. Two Puncture Sites On The Back Of The Hand 3. Practice Dressing And Securing The Cannula Training Skills / Applications ● Pediatric Dorsal Veins Injection ● Blood Collection ● Intravenous Infusion Set Includes: ● 2 Injection Arm-hands (one-year-old) ● 2 Injection Arm-hands (three-year-old) ● 2 Stands ● 1 Circulation Pump ● 10 Cotton Swabs ● 1 Spoon ● 1 Plastic Jar ● 1 Plastic Beaker ● 1 Storage Case ● 1 Instruction Manual Pediatric Iv Training Arm Specifications Lifelike Pediatric Arm Reproduction With Replaceable Skin And Multi-vein System Designed For Peripheral Intravenous Therapy. ● Venipuncture Possible In The Antecubital Fossa And Dorsum Of The Hand ● Accessible Veins Include Median, Basilic And Cephalic ● Arm Will Articulate To Pediatric Manikins And Task Trainers Kit Includes: ● 1 Pediatric Iv Arm - Right ● 1 Replacement Skin And Multi-vein System ● 1 Bottle Red Simulated Blood, ● 1 Can Of Manikin Lubricant ● 1 Blood Bag With Tubing And Connector ● 1 Clamp And Hook ● 1 Set Of Shoulder Attachment Hardware Pediatric Clinical Skills Trainer (for Ngt/ogt, Catheterization, Iv Insertion) ● Realistically Representing At Least, A Six-year-old Child For Skill And Scenario-based Training Of The Care And Management Of A Variety Of Pediatric Patients. For Clinical Training Of Common And Uncommon In-hospital Pediatric Patients Including Wound Assessment And Care, First Aid, And Child Abuse Training. ● Provides Training Targeting Key Skills Specific To Pediatric Care Providers. Designed To Meet The Training Requirements For Pediatric Patient Care And Helps Facilitate Delivery Of Consistent Simulations Into Nursing Curriculums. Features: 1. Articulating Iv Arm Allows For Practice Of Iv Cannulation, Medication Administration And Site Care And Maintenance. Venipuncture Possible In The Antecubital Fossa And Dorsum Of The Hand. Accessible Veins Include Median, Basilic And Cephalic. 2. Interchangeable Male And Female Genitalia Allow For Complete Urinary Catheterization. Enema Procedures May Also Be Performed. 3. Head With Anatomical Landmarks, Trachea, And Esophagus Along With Simulated Lungs And Stomach Allow The Practice Of Many Procedures, Including Ng, Og, Tracheal Care And Suctioning, And Insertion, Securing And Care Of Endotracheal Tubes. Arterial Blood Extraction Trainer Specifications Features 1. Palpable Arterial Pulse 2. Realistic Resistance Of Tissue And Artery Wall Felt With The Injection Needle 3. Natural Flashback Training Skills / Applications ● Radial Arterial Puncture ● Artery Blood Sampling ● Radial Line Placement Set Includes: ● 1 Wrist And Hand Model ● 1 Circulation Pump ● 2 Sets Of Puncture Skins (inner And Outer Skin) ● 4 Artery Tubes ● 1 Silicon Tape ● 1 Jar Of Coloring Powder (red) ● 1 Spoon ● 2 Plastic Jars ● 2 Connection Tubes ● 1 Vinyl Sheet ● 1 Syringe ● 1 Storage Case ● 1 Instruction Manual 3d Printer With Basic Materials Specifications ● Print Technology: Fusion Deposition Modeling (fdm) ● Composites-capable 3d Printer W/ Cc Core (high-strength Glass And Carbon Fiber Filament) ● Compatible With Metal 3d Printing Filament 316l / 17-4ph Material And Over 40+ Different Engineering Materials ● Large Build Volume: At Least 330 X 240 X 300 Mm (13 X 9.4 X 11.8 Inches) ● Compatible With Down To 20 Micron (0.001 Inch) Layer Resolution ● Print Head: Dual Extrusion Print Head With A Unique Auto-nozzle Lifting System And Swappable Print Cores ● Capable To Utilize Aa Print Core ● Technology Nozzle Type ● Bb Print Core Technology For Dissolvable Support Nozzle Type ● Cc Print Core For Composites And Abrasive Materials ● Print Head Compatibility ○ Aa Print Core - Build Material ○ Bb- Print Core - Support Material ○ Cc Print Core - Composite Material ● Materials: Compatible With 190+ Different Materials ● Integrated Air Manager ● Air Extraction Rate: 1 - 50 M3/h (35m3/h Nominal Rate For Most Materials At 23°c) ● Osite Material Speed And Precision: ● Print Speed: Min. 30- Max. 300mm/s ● Travel Speed: Min. 30- Max. 350mm/s Up To 16mm3/s ● Precision: 12.5/12.5/5 Micron ● Nozzle Options: 0.25mm / 0.4mm / 0.6mm / 0.8mm Diameter ● Print Surface: Pei Printing Surface ● Inductive Sensor: Yes ● Build Plate: Flexible ● Heatup Time: <2mins ● Auto Detection Of Materials Thru Nfc Technology Material Input ● Sound Operation Level: >51dba ● Built-in Live 1080p Camera ● Includes Software ● Future Proof Investment ● Automatic Materials Switching ● Materials Capacity: Up To Six Spools ● Materials Loading: Front Loading Connection ● File Types: Stl/obj/dae/amf ● Os Requirement: Windows/mac/ubuntu Linux ● Electrical: 100-240vac; 50-60hz ● Open Filament System – Print With Any 2.85 Mm Material ● Connectivity: Wifi, Ethernet, Lan, Usb Drive Connectivity ● 4.7-inch Touchscreen Interface ● Bowden Driven Extruder Technology ● Ruby-tipped Nozzle Option Available Inclusions: ● 3d Printer ● 1 Spool Of Tough Pla Filament And 1 Spool Of Pva (dissolvable) ● Heated Glass Bed ● Front Glass Enclosure ● Usb Thumb Drive, Calibration Card ● Maintenance Tools ● Nfc Spool Holder ● 2x Print Core Aa ● 1x Print Core Bb (for Pva Supports) ● Software With Unending Enterprise Software Subscription And Access To E-learning Modules ● Materials Station ○ Includes 6 Material Storage Equipped With Pre-feeders Which Automatically Swap Between Filaments During Run Outs. ○ Condition Filaments To Optimal Quality And Acts As A Dry-box ● 2 Units Of Filaments Dryer Storage Box ● 3 Units Of Filaments Storage Box ● 1 Unit Of 114l Filament Dry-box ● Speed Kit Bundle With: ○ 2x 0.8 Mm Aa Print Cores For Build Materials ○ 2x 0.8 Mm Bb Print Cores For Support Material Pva Removal Station Specifications Removal Station That Dissolves Support Material Of Prints Quickly And Effectively. ● Container Volume 13.7 Liters ● Maximum Part Size That Can Be Dissolved W 200 X D 230 X H 165 Mm (w 7.8 X D 9 X H 6.4 In) ● Supported Materials: Pla And Pva, Petg, Tough Pla, Nylon, Or Cpe In Combination With Pva ● Supported Solvents: Water ● Rotor Speed: 225 Rpm (normal), 100 Rpm (low) Physical Dimensions At Least W 303 X D 325 X H 374 Mm (w 11.9 X H 12.8 X D 14.7 In) Net Weight At Least 6.35 Kg (14 Lbs) Container Weight (when Empty) At Least 4.2 Kg (9.3 Lbs) Electrical Requirements Voltage: 100 - 240 V Ac Frequency: 50 - 60 Hz Power: 38 W Filaments Starter Bundle Specifications Filaments Starter Bundle Including: ● 5 Units Of Pla ● 5 Units Of Tough Pla ● 5 Units Of Petg ● 5 Units Of Pva ● 3 Units Of Breakaway Infant Warmer Specifications ● Pre-warm Mode Control, Manual Mode Control And Baby Mode Controlled By Micro-computer; ● Set Temperature And Baby Temperature Can Be Displayed Separately; ● Horizon Angle Of Heater Head And Inclination Of The Bassinet Can Be Adjusted; ● The Panels Around Bassinet Can Be Turned Outward; ● X-ray Cassette Under The Bassinet. ● With Wheels And Wheel Breaks ● 1 Unit Only.

Details: Conversion and renewal of the audio-video technology in the two conference rooms "Main Dome and West Dome" of the Potsdam Institute for Climate Impact Research (PIK) in building A31 Telegrafenberg, 14473 Potsdam. The solution offered includes the delivery, assembly, commissioning and programming of all media technology devices including brackets and connection services. The main dome with a floor area of approx. 80 square meters is furnished with conference tables in an oval U-arrangement for 22 participants. At the open end there is a large-format display and next to it a lectern for the speaker. The central media technology is installed in a cabinet below the display. The cabling between the lectern and the central media technology takes place via a cable duct on the ceiling of the floor below the conference room. The following basic functionalities are to be created: - Video signal transmission via IP (video-over-IP) - Audio signal transmission via IP (audio-over-IP) - Renewal of the display - Addition of a second, smaller display to show, for example, the participants in a video conference - Wireless video feed - Fixed camera technology (3 cameras) including automatic (sound-controlled) switching between the cameras and panning/tilting to the speaker - USB interface for an additional presentation PC for hybrid events - High-quality, ergonomic lectern - Renewal of the wireless microphone technology - Addition of a wired conference system - Renewal of the sound system - Media control processor for operating the media technology via touch panel and controlling the lighting system - Addition of cabling including connections The west dome with a floor space of approx. 40 square meters is equipped with a V-shaped video conference table for max. 9 participants. At the open end there is a monitor cart with two displays as well as a camera and video conference codec. The cabling to the conference table is currently being done on the fly and is to be renewed and covered with a cable bridge. The room is used for both video conferences and meetings with presentations. The following basic functions are to be created: - Renewal of the video conference system. Pik already uses Logitech Rally systems. The new system should correspond exactly to the existing systems in terms of operation and function. - Renewal of the media furniture - Renewal of the displays - Connection panel on the conference table for presentations on the displays and during video conferences - Additional cabling including connections - Addition of a media control for switching on/off and source switching

Details: Description Bids And Awards Committee Iloilo Provincial Government Procurement Of Ict Equipment Bid No. Agr-24-1583-b (rebid) Philippine Bidding Documents Sixth Edition July 2020 Table Of Contents Section I. Invitation To Bid 3 Section Ii. Instructions To Bidders 5 1. Scope Of Bid 5 2. Funding Information 5 3. Bidding Requirements 5 4. Corrupt, Fraudulent, Collusive, And Coercive Practices 5 5. Eligible Bidders 5 6. Origin Of Goods 6 7. Subcontracts 7 8. Pre-bid Conference 7 9. Clarification And Amendment Of Bidding Documents 7 10. Documents Comprising The Bid: Eligibility And Technical Components 7 11. Documents Comprising The Bid: Financial Component 7 12. Bid Prices 8 13. Bid And Payment Currencies 8 14. Bid Security 8 15. Sealing And Marking Of Bids 9 16. Deadline For Submission Of Bids 9 17. Opening And Preliminary Examination Of Bids 9 18. Domestic Preference 9 19. Detailed Evaluation And Comparison Of Bids 9 20. Post-qualification 10 21. Signing Of The Contract 10 Section Iii. Bid Data Sheet 11 Section Iv. General Conditions Of Contract 12 1. Scope Of Contract 12 2. Advance Payment And Terms Of Payment 12 3. Performance Security 12 4. Inspection And Tests 12 5. Warranty 13 6. Liability Of The Supplier 13 Section V. Special Conditions Of Contract 14 Section Vi. Schedule Of Requirements 16 Section Vii. Technical Specifications 17 Section Viii. Checklist Of Technical And Financial Documents 18 Section I. Invitation To Bid Purchase Of Ict Equipment Bid No. Agr-24-1583-b (rebid) 1. The Iloilo Provincial Government Through The General Fund 2024 Intends To Apply The Sum Of Seventy-one Thousand Five Hundred Nineteen Pesos (php 71,519.00) Being The Abc To Payments Under The Contract For The Purchase Of Ict Equipment. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Iloilo Provincial Government Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 14 Days Upon Receipt Of The Notice To Proceed (ntp). Bidders Should Have Completed, Within Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From The Bids And Awards Committee Secretariat Of The Iloilo Provincial Government And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m. To 5:00 P.m. 90 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 15, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos (php 500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. The Iloilo Provincial Government Will Hold A Pre-bid Conference On N/a At 9:00 A.m. At The N/a And/or Through Video Conferencing Or Webcasting, Upon Request At Least Three (3) Days Before The Pre-bid Conference, Via Zoom Or Other Videoconferencing Portals, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The 5th Floor, Bac Secretariat Office, Iloilo Provincial Capitol, Iloilo City On Or Before November 25, 2024 At 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On November 25, 2024 At 9:01 A.m.at The 5th Floor, Bac Secretariat Office, Iloilo Provincial Capitol, Iloilo City Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. A. The Participating Bidder/supplier Or Its Authorized Representative Must Indicate In Any Of The Eligibility Documents, An Email Address Or A Working Fax Number. The Absence Of Which Shall Be A Ground For Disqualification. Notice To The Bidder/supplier Through The Use Of Either Of These Means (email/fax) Is Considered Sufficient Notice. The Date Of Filing Of Reconsideration And All Communications With The Bac Shall Be Its (bac) Date Of Receipt. B. The Bidder(s)/awardee(s) Or Its Authorized Representative Must Conform To The Notice Of Award Within Three (3) Calendar Days From Receipt Of Such Notice And The Winning Bidder Shall Post The Required Performance Security And Enter Into Contract With The Procuring Entity Within Ten (10) Calendar Days From Receipt By The Winning Bidder Of The Notice Of Award In Accordance With Section 37.2.1 Of The Revised Irr Of R.a. No. 9184. C. The Bidder/supplier Must Have No Pending Unaccepted Notice To Proceed Three (3) Days From The Date Of Acceptance And Signing Of The Purchase Order. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. D. The Bidder/supplier Must Have No Notice Of Award Pending Its Conformity Three (3) Days From The Date Of Its Receipt Of The Notice Of Award. Otherwise, It Shall Be Aground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. E. The Bidder/supplier Shall Submit A List Of All Its Ongoing And Completed Projects With The Iloilo Provincial Government Indicating The Delivery Periods And Accomplishments Of Such Projects. F. The Bidder/supplier At The Time Of The Bidding Must Have No Pending Unposted Performance Or Warranty Security, As The Case May Be, Beyond The Period Allowed In The Notice Of Award. Otherwise, It Shall Be A Ground For Disqualification And The Bidder Will Be Rated "failed" During The Preliminary Examination Of Bids And/or Its Bid Shall Be Declared As "non-responsive" During Post-qualification. 11. The Iloilo Provincial Government Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Atty. Raemman M. Lagrada Bac Secretariat Head 5th Floor, Bids And Awards Committee Iloilo Provincial Capitol Email Address: Ipg_bacs@yahoo.com Website: Iloilo.gov.ph Telephone Number: (033) 336-0736 13. You May Visit The Following Websites For Downloading Of Bidding Documents: Ipg.gov.ph And/or Philgeps.com November 7, 2024 Atty. Dennis T. Ventilacion Chairman, Bids And Awards Committee Section Ii. Instructions To Bidders 1. Scope Of Bid The Procuring Entity, Iloilo Provincial Government Wishes To Receive Bids For The Purchase Of Ict Equipment With Bid No. Agr-24-1583-b (rebid) . The Procurement Project (referred To Herein As “project”) Is Composed Of Two (2) Items, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For 2024 In The Amount / 2.2. The Source Of Funding Is: Lgus, The Annual Or Supplemental Budget, As Approved By The Sanggunian. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manuals And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Ib By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Verified And Accepted The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, And Coercive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A. Foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: I. When A Treaty Or International Or Executive Agreement As Provided In Section 4 Of The Ra No. 9184 And Its 2016 Revised Irr Allow Foreign Bidders To Participate; Ii. Citizens, Corporations, Or Associations Of A Country, Included In The List Issued By The Gppb, The Laws Or Regulations Of Which Grant Reciprocal Rights Or Privileges To Citizens, Corporations, Or Associations Of The Philippines; Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or Iv. When There Is A Need To Prevent Situations That Defeat Competition Or Restrain Trade. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No.9184, The Bidder Shall Have An Slcc That Is At Least One (1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must Be At Least Equivalent To: A. For The Procurement Of Non-expendable Supplies And Services: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc. B. For The Procurement Of Expendable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. C. For Procurement Where The Procuring Entity Has Determined, After The Conduct Of Market Research, That Imposition Of Either (a) Or (b) Will Likely Result To Failure Of Bidding Or Monopoly That Will Defeat The Purpose Of Public Bidding: The Bidder Should Comply With The Following Requirements: [select Either Failure Or Monopoly Of Bidding Based On Market Research Conducted] I. Completed At Least Two (2) Similar Contracts, The Aggregate Amount Of Which Should Be Equivalent To At Least Fifty Percent (50%) In The Case Of Non-expendable Supplies And Services Or Twenty-five Percent (25%) In The Case Of Expendable Supplies] Of The Abc For This Project; And Ii. The Largest Of These Similar Contracts Must Be Equivalent To At Least Half Of The Percentage Of The Abc As Required Above. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.1 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time And Either At Its Physical Address As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicated In Itb Clause 5.3 Should Have Been Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii (checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification Issued By Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Bid Prices 12.1. Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A. For Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw (ex-works, Ex-factory, Ex-warehouse, Ex-showroom, Or Off-the-shelf, As Applicable); Ii. The Cost Of All Customs Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other (incidental) Services, If Any, Listed In E. B. For Goods Offered From Abroad: I. Unless Otherwise Stated In The Bds, The Price Of The Goods Shall Be Quoted Delivered Duty Paid (ddp) With The Place Of Destination In The Philippines As Specified In The Bds. In Quoting The Price, The Bidder Shall Be Free To Use Transportation Through Carriers Registered In Any Eligible Country. Similarly, The Bidder May Obtain Insurance Services From Any Eligible Source Country. Ii. The Price Of Other (incidental) Services, If Any, As Listed In Section Vii (technical Specifications). 13. Bid And Payment Currencies 13.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 13.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos. 14. Bid Security 14.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 14.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty (120) Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. 16. Deadline For Submission Of Bids 16.1. The Bidders Shall Submit On The Specified Date And Time At Its Physical Address As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 17.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 17.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1. The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed,” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of The 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items, And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 15 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii (technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Complete Bid - One Project Having Several Items That Shall Be Awarded As One Contract In Case Of Complete Bid. Line Bidding/partial Bidding - One Project Having Several Items, Which Shall Be Awarded As Separate Contracts Per Item 19.5. Except For Bidders Submitting A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation, All Bids Must Include The Nfcc Computation Pursuant To Section 23.4.1.4 Of The 2016 Revised Irr Of Ra No. 9184, Which Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. For Bidders Submitting The Committed Line Of Credit, It Must Be At Least Equal To Ten Percent (10%) Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 20. Post-qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps) And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract 21.1. The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A. Refers To The Contracts To Be Bid Or The Object Of The Contract; B. Completed Within Three (3) Years Prior To The Deadline For The Submission And Receipt Of Bids. 7.1 Subcontracting Is Not Allowed. 12 The Price Of The Goods Shall Be Quoted Ddp Nisu, Concepcion, Iloilo Or The Applicable International Commercial Terms (incoterms) For This Project. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration, Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Two Percent (2%) Of Abc, If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; Or B. The Amount Of Not Less Than Five Percent (5%) Of Abc, If Bid Security Is In Surety Bond. 15 Bidders Shall Prepare An Original Of The First (eligibility And Technical) And Second (financial) Envelopes. In Addition, Bidders Shall Submit Separate Copies Of The First And Second Envelopes (copy 1, Copy 2) And Each Set Of Documents Must Clearly Indicate Whether The Same Is Original, Copy 1, Or Copy 2. In The Event Of Any Discrepancy Between The Original And The Copies, The Original Shall Prevail. 19.3 No Further Instructions. 20.2 For The Procurement Of Drugs And Medicines And Medical Equipment/supplies, The Bidder Shall Submit The Following: A. Certificate Of Product Registration From Food And Drug Administration (fda) For Easy Validation During The Post-qualification; B. Certificate If Good Manufacturing Practice From Fda, For Easy Validation During The Post-qualification; C. Batch Release Certificate From Fda, For Easy Validation During The Post-qualification; D. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/ Dealer Of The Products / Items For Easy Validation During The Post-qualification; E. For The Procurement Of Regulated Drugs, The Applicable Type Of S-license: S-1, S-3 (retailer) S-4 (wholesaler) S-5c (manufacturer) S-5d (bulk Depot/storage) S-5e S-5i (importer); F. License To Operate (lto) Issued By Fda, If Applicable; G. After-sales Services/parts, If Applicable; H. Manpower Requirements, If Applicable. 21.2 No Further Instructions. Section Iv. General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract (scc). 2. Advance Payment And Terms Of Payment 2.1. Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2. The Procuring Entity Is Allowed To Determine The Terms Of Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than Prior To The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr Of Ra No. 9184. 4. Inspection And Tests The Procuring Entity Or Its Representative Shall Have The Right To Inspect And/or To Test The Goods To Confirm Their Conformity To The Project Specifications At No Extra Cost To The Procuring Entity In Accordance With The Generic Procurement Manual. In Addition To Tests In The Scc, Section Iv (technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identity Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 6.1. In Order To Assure That Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 6.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Section V. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines, State:] “the Delivery Terms Applicable To This Contract Are Delivered To The Nisu, Concepcion, Iloilo-. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is The Authorized Employee/official Of The Iloilo Provincial Government. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. 2.2 Partial Payment Is Not Allowed. 4 The Inspections And Tests That Will Be Conducted Are Through Physical Inspection. Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Desktop Computer 1 1 2 Underwater Camera 1 1 ___________________________________ Signature Over Printed Name Section Vii. Technical Specifications Bid No.: Agr-24-1583-b Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1. Desktop Computer *processor: 12mb Smart Cache, 4-cores, 8-threads; 3.30ghz Or Better Performance Base Frequency *motherboard: H610 Motherboard With 6 + 1 + 1 Hybrid Phases Or Better Digital Vrm Design, Pcle 4.0 Design, Gen 3 X 4 M.2, Anti-sulfur Resistor, Smart Fan6 Or Better *ram: 8gb Od Ddr4 With 2133ghz Or Higher *graphics: Hd Graphics That Support 4096 × 2160 @ 60hz Hdmi Or Better *case: Micro Atx Case With 700w Power Supply *ups: 650va/360 Watts Or Better *accessories: Usb Keyboard/mouse/mouse Pad/speaker 2. Underwater Camera *gp2 Processor Or Better *image Sensor: 1/1.9" Cmos, 27.6mp Or Better *front Display Size: 1.4" Color Lcd, Min. *rear Display: 2.27" Touch Lcd, Min. *with Waterproof Case And Memory Card Terms And Conditions 1. All Items Must Be Delivered At Nisu, Concepcion, Iloilo 2. All Items Must Be Delivered Within 14 Days Upon Receipt Of Notice To Proceed (ntp) 3. All Items Must Have A Warranty Period For Atleast 1 Year 4. All Items Must Be Delivered At Their Best Quality And Condition 5. Winning Bidder Must Coordinate With Provincial Agriculture Office, Fisheries Division Prior To The Delivery Of Items Listed Above ___________________________________ Signature Over Printed Name Section Viii. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages);or ⬜ (b) Registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document, And ⬜ (c) Mayor’s Or Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And ⬜ (d) Tax Clearance Per E.o. No. 398, S. 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (f) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (g) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (h) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (i) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (j) The Supplier’s Audited Financial Statements, Showing, Among Others, The Supplier’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And ⬜ (k) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc); Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. Class “b” Documents ⬜ (l) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (m) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (n) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (o) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (p) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.   Bid Form Date: _____________________ Bid No.: ___________________ To: Bids And Awards Committee Iloilo Provincial Government Iloilo Provincial Capitol Bonifacio Drive, Iloilo City Having Examined The Philippine Bidding Documents (pbds) Including The Supplemental Or Bid Bulletin Numbers __________, The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Offer To Supply/deliver/perform _________________________________________ [description Of The Goods] In Conformity With The Said Pbds For The Sum Of _______________________________________, (php _______________________) [total Bid Amount In Words And Figures] Or The Total Calculated Bid Price, As Evaluated And Corrected For Computational Errors, And Other Bid Modifications In Accordance With The Price Schedules Attached Herewith And Made Part Of This Bid. The Total Bid Price Includes The Cost Of All Taxes, Such As, But Not Limited To: Value Added Tax (vat), Income Tax, Local Taxes, And Other Fiscal Levies And Duties, As Applicable, Which Are Itemized Herein Or In The Price Schedules, If Our Bid Is Accepted, We Undertake: A. To Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements Of The Philippine Bidding Documents (pbds); B. To Provide A Performance Security In The Form, Amounts, And Within The Times Prescribed In The Pbds; C. To Abide By The Bid Validity Period Specified In The Pbds And It Shall Remain Binding Upon Us At Any Time Before The Expiration Of That Period. Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Bid You May Receive. We Certify/confirm That We Comply With The Eligibility Requirements Pursuant To The Pbds. The Undersigned Is Authorized To Submit The Bid On Behalf Of ____________________________________________________ As Evidenced By The Attached [name Of The Bidder] ______________________________________. [state The Written Authority]. We Acknowledge That Failure To Sign Each And Every Page Of This Bid Form, Including The Schedule Of Prices, Shall Be A Ground For The Rejection Of Our Bid. Name: Legal Capacity: Signature: Duly Authorized To Sign The Bid For And Behalf Of: Date: Republic Of The Philippines) City Of ____________________) S.s. Bid Securing Declaration Bid No.: ___________________________ To: Bids And Awards Committee Iloilo Provincial Government Iloilo Provincial Capitol Bonifacio Drive, Iloilo City I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid Securing Declaration. 2. I/we Accept That: (a) I/we Will Be Automatically Disqualified From Bidding For Any Procurement Contract With Any Procuring Entity For A Period Of Two (2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen (15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1, Except 69.1(f),of The Irr Of Ra No. 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid Securing Declaration Shall Cease To Be Valid On The Following Circumstances: A. Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; B. I Am/we Are Declared Ineligible Or Post-disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; And C. I Am/we Are Declared The Bidder With The Lowest Calculated Responsive Bid, And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ______ __ At ___________________________. _________________________________________________ [signature Over Printed Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Subscribed And Sworn To Before Me, _______________________ In The _____________________. Affiant Exhibited To Me His Valid Identification Card With Id No. _________________ Issued By: ___________________. Doc No.:______; Page No. _____; Book No.:_____; Series Of: _____; Republic Of The Philippines) City Of _____________________) S.s. Omnibus Sworn Statement (for Sole Proprietorship) I, _______________________________________of Legal Age, Single/married/widow, Filipino, And Residing At ________________________________________, Philippines, After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. I Am The Sole Proprietor Or Authorized Representative Of ______________________________________ With Office Address At ______________________________________; 2. As The Owner And Sole Proprietor, Or Authorized Representative Of _____________________________________, I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For ___________________________________________ [name Of The Project] Of The Iloilo Provincial Government, As Shown In The Attached Duly Notarized Special Power Of Attorney; 3. __________________________________________ Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. __________________________________________ Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. ___________________________________________ Complies With Existing Labor Laws And Standards; And 8. ___________________________________________ Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The ______________________________________. [name Of The Project] 9. _________________________________________ Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ______ __ At ___________________________. ________________________________________________ [signature Over Printed Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Subscribed And Sworn To Before Me, _______________________ In The _____________________. Affiant Exhibited To Me His Valid Identification Card With Id No. _________________ Issued By: ___________________. Doc No.:______; Page No. _____; Book No.:_____; Series Of: _____; Republic Of The Philippines) City Of ____________________) S.s. Omnibus Sworn Statement (for A Partnership Or Cooperative) I, _______________________________________of Legal Age, Single/married/widow, Filipino, And Residing At ________________________________________, Philippines, After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. I Am The Duly Authorized And Designated Representative Of ______________________________ With Office Address At ___________________________________; 2. I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For __________________________________ Of The Iloilo Provincial Government, As Shown [name Of The Project] In The Attached _________________________________________________; [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;] 3. _____________________________________ Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. _____________________________________ Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. None Of The Officers And Members Of _____________________________________ Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. _____________________________________ Complies With Existing Labor Laws And Standards; And 8. _____________________________________ Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The ______________________________________. [name Of The Project] 9. _____________________________________ Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ______ __ At ___________________________. _________________________________________________ [signature Over Printed Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Subscribed And Sworn To Before Me, _______________________ In The _____________________. Affiant Exhibited To Me His Valid Identification Card With Id No. _________________ Issued By: ___________________. Doc No.:______; Page No. _____; Book No.:_____; Series Of: _____; Republic Of The Philippines) City Of _____________________) S.s. Omnibus Sworn Statement (for A Corporation Or Joint Venture) I, _______________________________________of Legal Age, Single/married/widow, Filipino, And Residing At ________________________________________, Philippines, After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. I Am The Duly Authorized And Designated Representative Of ______________________________ With Office Address At ___________________________________; 2. I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For __________________________________ Of The Iloilo Provincial Government, As Shown [name Of The Project] In The Attached _________________________________________________; [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;] 3. _____________________________________ Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. _____________________________________ Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. None Of The Officers, Directors, And Controlling Stockholders Of _____________________________________is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. _____________________________________ Complies With Existing Labor Laws And Standards; And 8. _____________________________________ Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: E. Carefully Examining All Of The Bidding Documents; F. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; G. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And H. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The ______________________________________. [name Of The Project] 9. _____________________________________ Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ______ __ At ___________________________. ________________________________________________ [signature Over Printed Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Subscribed And Sworn To Before Me, _______________________ In The _____________________. Affiant Exhibited To Me His Valid Identification Card With Id No. _________________ Issued By: ___________________. Doc No.:______; Page No. _____; Book No.:_____; Series Of: _____; Republic Of The Philippines) City Of ____________________) S.s. Performance Securing Declaration Bid No: ____________________ To: Bids And Awards Committee Iloilo Provincial Government Iloilo Provincial Capitol Bonifacio Drive, Iloilo City I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, To Guarantee The Faithful Performance By The Supplier/distributor/manufacturer/contractor/consultant Of Its Obligations Under The Contract, I/we Shall Submit A Performance Securing Declaration Within A Maximum Period Of Ten (10) Calendar Days From The Receipt Of The Notice Of Award Prior To The Signing Of The Contract. 2. I/we Accept That: I/we Will Be Automatically Disqualified From Bidding For Any Procurement Contract With Any Procuring Entity For A Period Of One (1) Year For The First Offense, Or Two (2) Years For The Second Offense, Upon Receipt Of Your Blacklisting Order If I/we Have Violated My/our Obligations Under The Contract; 3. I/we Understand That This Performance Securing Declaration Shall Cease To Be Valid Upon: A. Issuance By The Procuring Entity Of The Certificate Of Final Acceptance, Subject To The Following Conditions: I. Procuring Entity Has No Claims Filed Against The Contract Awardee; Ii. It Has No Claims For Labor And Materials Filed Against The Contractor; And Iii. Other Terms Of The Contract; Or B. Replacement By The Winning Bidder Of The Submitted Psd With A Performance Security In Any Of The Prescribed Forms Under Section 39.2 Of The 2016 Revised Irr Of Ra No. 9184 As Required By The End-user. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ______ __ At ___________________________. _________________________________________________ [signature Over Printed Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Subscribed And Sworn To Before Me, _______________________ In The _____________________. Affiant Exhibited To Me His Valid Identification Card With Id No. _________________ Issued By: ___________________. Doc No.:______; Page No. _____; Book No.:_____; Series Of: _____; Email Address: ______________________________________ Statement Of Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid Bidder’s Name: Email Address: Bidder’s Address: Fax Number: Tel. Number: Name Of Project Amount Of Contract Date Of Contract Effectivity Owner’s Name And Address Delivery Period Date Of Delivery Date Of Acceptance Signature Over Printed Name Attachments: 1. Purchase Order (po) 2. Acceptance And Inspection Report (air) Statement Of All On-going Government And Private Contracts (including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid) Bidder’s Name: Email Address: Bidder’s Address: Fax Number: Tel. Number: Name Of Project/s Amount Of Contract Date Of Contract Effectivity Owner’s Names And Address Delivery Period (indicate All Delivery Periods If Staggered Delivery Allowed) End Of Delivery Period Value Of Outstanding Contracts (indicate If Partial Delivery Allowed) No. Of Days From End Of Delivery Period Days Of Approved Extension/ Suspension, If Any Total Value Of Outstanding Contracts (php) Signature Over Printed Name Fill Up All The Columns Accordingly Disclaimer: Non-disclosure Of All On-going Contracts And Details Thereof Is Grounds For Ineligibility And Disqualification.

Details: Description Itb-auction-2024-03 Republic Of The Philippines Province Of Davao Oriental City Of Mati City Mayor’s Office Invitation To Bid For The Sale Of Unserviceable Equipment The Asset Disposal Committee In Behalf Of Lgu – City Of Mati Invites Bidders To Bid For The Purchase Of Unserviceable Property, As Follows: Description Quantity Lot 1a - Heavy Equipment 1. Shantui Bulldozer - Engine No: 41178768, Chassis No: Sd22aa115251 1 Unit 2. Tata Daewoo Garbage Compactor - Engine No: De12tis218321, Chassis No: Kl3f4cefidk000248, Temp Plate No: 1201-121867 1 Unit 3. Tata Daewoo Garbage Compactor - Engine No: De12tis218561cc, Chassis No: Kl3f4cefidk000249, Temp Plate No: 1201-136308 1 Unit 4. Tata Daewoo Garbage Truck Compactor - Engine No: De12tis543922cc, Chassis No: Kl3f4cefifk000339, Temp Plate No: 1201-152709 1 Unit 5. Tata Daewoo Garbage Truck Compactor - Engine No: De12tis543925cc, Chassis No: Kl3f4cefifk000338, Temp Plate No: 1201-152710 1 Unit 6. John Deere Backhoe Loader - Engine No: T04045d748994, Chassis No: 70310ex841884, Plate No: Jd-310e 1 Unit 7. Tata Daewoo Dumptruck - Engine No: De12tis547504cc, Chassis No: Kl3f3defifk000173, Temp Plate No: 1201-141546 1 Unit Starting Bid Price For The Above Units Based On The Coa Region Xi, Appraisal Review Report P 6,691,633.33 Actual Bid Price Lot 1b – Light Vehicles Quantity 1. Jinbei General Utility Response Vehicle - Engine No: Ca4d32090112131, Chassis No: Lsycjd459ah082133, Plate No: Skk-364 1 Unit 2. Ford Ranger 2.2l 4x2 Xlt M/t Pickup - Engine No: P4at1180160, Chassis No: Mnclmff80ew267672, Plate No: Saa-4368 1 Unit 3. Mitsubishi Delica Van - Engine No: D4bf-t652586, Chassis No: P25w-1101367, Plate No: Shn-683 1 Unit 4. Ford Everest 4x4 Suv - Engine No: Wlat437611, Chassis No: Mncls4d403w104178, Plate No: Skb-548 1 Unit 5. Ford Ranger 2.2l 4x2 Xlt M/t - Engine No: P4at1178978, Chassis No: Mnclmff80ew266423, Plate No: Saa-4374 1 Unit 6. Suzuki Multicab - Engine No: Fga5565087, Chassis No: Dc51t-115604, Plate No: Sjj-882 1 Unit 7. Suzuki Multicab (conversion From Left To Right Assemble Car Patrol Body) - Engine No: 7183129, Chassis No: Da52t-245246 1 Unit 8. Suzuki Multicab - Engine No: 5153769, Chassis No: Db51t150630, Plate No: Sha-290 1 Unit 9. 2010 Foton View 2.4l M/t Ambulance - Engine No: Bj486zqa60147, Chassis No: Lvcb1dba8ab004627 1 Unit 10. Suzuki Multicab - Engine No: Fga6215004, Chassis No: Dc51t355554, Plate No: Sgx-878 1 Unit 11. Suzuki Multicab - Engine No: Dk51t304183, Chassis No: F6a6197125, Plate No: 1201-47381 1 Unit 12. Mitsubishi Delica Van - Engine No: 4d56eq6998, Chassis No: P35w0219012, Plate No: Shm-947 1 Unit Starting Bid Price For The Above Units Based On The Coa Region Xi, Appraisal Review Report P 832,997.70 Actual Bid Price Lot 1c – Motorcycle & Three Wheeled Vehicles Quantity 1. Honda Xrm 125 Motorcycle - Engine No: Xrm15e008490, Chassis No: Xrm15008490, Plate No: Se-2994 1 Unit 2. Honda Tmx 155 Motorcycle - Engine No: Kb509e339030, Chassis No: Kb509339019, Plate No: Sh-9300 1 Unit 3. Honda Xrm 125 Motorcycle - Engine No: Xrm16e139052, Chassis No: Xrm16139048, Plate No: Sh-9293 1 Unit 4. Kawasaki Fury Ax 125 Motorcycle - Engine No: Ax125aep16968, Chassis No: Kb509339019, Plate No: Se-2990 1 Unit 5. Kawasaki Bajaj Motorcycle - Engine No: Dumbrd88993, Chassis No: Md2ddd22rwb41621, Plate No: Se-4907 1 Unit 6. Jianshe Motorcycle - Engine No: Jm157fmja01060427, Chassis No: Lapzcklb61a000038, Plate No: Se-1775 1 Unit 7. Kawasaki Rouser 135 Motorcycle - Engine No: Egbuk46064, Chassis No: Mdzjdjdzzuck92816, Plate No: Sh-9279 1 Unit 8. Honda Xrm 125 Motorcycle - Engine No: Xrm17e076867, Chassis No: Xrm17076841, Plate No: Sa-11792 1 Unit 9. Bajaj Re Three-wheeler Vehicle - Engine No: Azzwke05563, Chassis No: Md2a25by2kwe78402, Temp Plate No: 1101-780098 1 Unit 10. Rescue Vehicle Integrated With Rescue Boat - Engine No: S5c8404645, Chassis No: Mbx0000wnsc067335, Temp Plate: 130107 1 Unit 11. Yamaha Dt 125 Motorcycle - Engine No: 4ar-034230, Chassis No: 4ar-034230, Plate: Se-4725 1 Unit 12. Honda Xrm 110 Motorcycle - Engine No: Xrm110me713465, Chassis No: Xrm1205y134651, Plate: Sf-4116 1 Unit 13. Honda Xrm 125 Motorcycle - Engine No: Xrm16e184819, Chassis No: Xrm16184878, Plate: Sh-9302 1 Unit 14. Honda Xrm 110 Motorcycle - Engine No: Xrm110me7134641, Chassis No: Xrm1205y134641, Plate: Sf-4123 1 Unit 15. Honda Xrm 110 Motorcycle - Engine No: Xrm110me7130726, Chassis No: Xrm1205y130726, Plate: Sf-4114 1 Unit 16. Honda Xrm 110 Motorcycle - Engine No: Xrm110me7129566, Chassis No: Xrm1205y129566, Plate: Sf-4119 1 Unit 17. Jianshe Motorcycle - Engine No: Jym157fmj-a01060457, Chassis No: Lapzcklb-91a000-034, Plate No: Se-1784 1 Unit Starting Bid Price For The Above Units Based On The Coa Region Xi, Appraisal Review Report P 217,989.90 Actual Bid Price Lot 2a – It Equipment Quantity Appraised Value 1. Acer E5 Laptop - Sn: Nxgrqsp002743149e97600 1 Unit 200.00 2. Lenovo G50 Laptop - Sn: Pf09e6xy 1 Unit 200.00 3. Synology Network Attached Storage (nas) - Sn: 1580mpn151912 1 Unit 100.00 4. Toshiba Laptop - Sn: 8b265563w 1 Unit 200.00 5. Acer E5 Laptop - Sn: Nxmt6sp0015061116e3400 1 Unit 200.00 6. Acer V5 Laptop - Sn: Nxmc45p001330045c97600 1 Unit 200.00 7. Acer Aspire 4755g Laptop - Sn: Nxrnesp00120304dde2000 1 Unit 200.00 8. Acer Aspire V3 - Sn: Nxrz3sp00522320ab17600 1 Unit 200.00 9. Infocus In26 Projector 1 Unit 200.00 10. Evolis Basic Card Printer - Sn: 000332008 1 Unit 200.00 11. Konica Minolta Bizhub 223 Photocopier 1 Unit 300.00 12. Optoma X515 Projector - Sn: Q72s802aaaaac0002 1 Unit 300.00 13. Epson Eb-1960 Projector - Sn: Rkwf410006l 1 Unit 300.00 14. Laptop With Complete Accessories 1 Unit 100.00 15. Lenovo Laptop - Sn: Pf09e4f2 1 Unit 200.00 16. Amd A10-6800ghz Desktop Computer With Complete Accessories 1 Unit 100.00 17. Desktop Computer With Complete Accessories 1 Unit 100.00 18. Desktop Computer With Complete Accessories 1 Unit 100.00 19. Desktop Computer With Complete Accessories 1 Unit 100.00 20. Desktop Computer With Complete Accessories 2 Units 100.00 21. Desktop Computer With Complete Accessories 1 Unit 100.00 22. Konica Minolta Photocopier 1 Unit 300.00 23. Desktop Computer With Complete Accessories 1 Unit 100.00 24. Desktop Computer With Complete Accessories 1 Unit 100.00 25. Intel Core I3 Desktop Computer With Printer 1 Unit 100.00 26. Intel Core I5 3.0ghz Desktop Computer 1 Unit 100.00 27. Desktop Computer With Complete Accessories 1 Unit 100.00 28. Intel Pentium D 3.4ghz Desktop Computer With Complete Accessories 1 Unit 100.00 29. Desktop Computer With Complete Accessories 1 Unit 100.00 30. Desktop Computer With Complete Accessories 1 Unit 100.00 31. Desktop Computer With Complete Accessories 1 Unit 100.00 32. Intel Core I7-3770k 3.50ghz Asus Desktop Computer 2 Units 200.00 33. Computer Desktop Intel Core I7 Processor 24" Led Monitor Sn: Xc24sa2006010856 1 Unit 100.00 34. Intel Core I7 Desktop Computer With Complete Accessories, Acer 21.5" Lcd Monitor Sn: Mmlz3ss0106050000482425 1 Unit 100.00 35. Intel Core I7-3770k Desktop Computer With Complete Accessories, Aoc 21.5" Monitor Sn: Mmlxlss0093400c3514215 1 Unit 100.00 36. Computer Desktop Sn: Ha19h9fq637792f (samsung) 1 Unit 100.00 37. Intel Core I7 Desktop Computer, 23" Samsung Monitor, Epson Printer 1 Unit 200.00 38. Desktop Computer With Complete Accessories, Epson L210 Printer Sn: Smxk214170, 1 Unit Cisco Wireless Broadband Router With 4 Ports Lan & 2 Units Wireless Network Interface Card 1 Unit 200.00 39. Samsung Ultra Book Laptop - Sn: Hv3691fc600612 1 Unit 100.00 40. Computer With Complete Accessories 1 Unit 400.00 41. Nine (9) Units Platinum Iv 1.4ghz Desktop Computer & Two (2) Units Printer 9 Units 900.00 42. Desktop Computer With Tablet & Ups 1 Unit 200.00 43. Acer Laptop - Sn: Nxm5wsp00225006f6e6600 1 Unit 200.00 44. Rpta Workstation 1) 4 Units Lenovo Think Centre M58 Tower (4x4) Stealth Blank M/t Model: 7484-pr2 Sn: R8vpc29, R8vpc34, R8vpc32 & R8vpc43 2) 4 Units Samsung 19" Lcd Monitor Sn: My19hmds809924, My19hmds809807, My19hmds809805, My19hmds809948 3) 1 Unit Computer Table 4) 1 Unit D-link Dpr 1061 Multi Function Print Server Sn: P1r6198000423 5) 1 Unit Ibm Xservice 3400m2 Server W/ Usb, Keyboard, Optical Mouse M/t Model 783624a Sn: 99a0267 6) 1 Unit Samsung 19" Monitor Lcd Model: B1930nw Sn: Nddphmdz100249 7) 1 Unit Emerson Liebert Gxt2-1000rt230 1000va Ups 8) 1 Unit Linux Based Router With 15.6" Aoc Lcd Monitor Sn: V4898ja006811 Product Name: Lcd1619sw 9) 1 Unit D-link External Modem Sn: Es0i157000351 10) 2 Units Oki Microline Turbo 791 Printer - Sn: Ae91032739b0, Ae8900404b9b0 11) 3com 4210 26-port Switch - Sn: 9j8fbmp75e8c7 1 Unit 3,000.00 45. Computer Chair & Hp Colored Printer 1 Unit 100.00 46. Computer Set With Complete Accessories 1 Unit 100.00 47. Computer Table, Gaslift Computer Chair With Complete Accessories 1 Unit 100.00 48. Desktop Computer (mitac) 1 Unit 200.00 49. Digital Camera 1 Unit 100.00 50. Acer Extenza 355 Laptop With Canon Ip120 & Complete Accessories 1 Unit 100.00 51. Computer Notebook Laptop Intel Core 2 Extreme Processor With Complete Accessories 1 Unit 100.00 52. Six (6) Units Intel Ibm Server 3200, One (1) Unit Computer Server, Three (3) Units Hp 1020 With Complete Accessories 6 Units 1,500.00 53. Notebook (asus X401a-wx021r/blu/pdcb970) Hd Display 14", Intel Pentium B970 (2.30ghz), 4gb Ddr3 Ram, 320gb Hard Disk Drive, 0.3mp Webcam 1 Unit 200.00 54. One (1) Desktop Computer Dell Vostro Model #: 4hx98, Monitor 17" Flat Panel Lcd Dell Brand Model R339h Sn: Cw-0j672h-64180-098-ynkl, One (1) Unit Ups Apc Back Ups 650va & Canon Ip2770 Printer Sn: Hrvg61740 1 Unit 100.00 55. Multimedia Projector With Complete Accessories (benq) 1 Unit 100.00 Starting Bid Price For The Above Units Based On The Coa Region Xi, Appraisal Review Report P 13,400.00 Actual Bid Price Lot 2b – Air-conditioning Units Quantity Appraised Value 1. Koppel 3.0tr Floor Mounted Aircon - Sn: Dg323089 1 Unit 1,000.00 2. Koppel 4.0hp Floor Mounted Aircon - Sn: Lm586109 1 Unit 1,000.00 3. Koppel 4.0hp Floor Mounted Aircon - Sn: Lm623182 1 Unit 1,000.00 4. Panasonic 2.5hp Window Type Aircon - Sn: 1d1321785 1 Unit 800.00 5. General 2.5hp Wall Mounted Aircon - Sn: 340688457088b250130017 1 Unit 1,000.00 6. General 3t 4.0hp Floor Mounted Aircon - Sn: 3406442830188210160040 1 Unit 1,000.00 7. Koppel 3.0tr Floor Mounted Aircon - Sn: Cf800553, Cf540519 1 Unit 1,000.00 8. Carrier 2.5hp Wall Mounted Aircon - Sn: 12100214 1 Unit 1,000.00 9. Carrier 2.5hp Wall Mounted Aircon - Sn: 12100215 1 Unit 1,000.00 10. Carrier Floor Mounted Aircon - Sn: 021338368 1 Unit 1,000.00 11. Koppel Aircon - Sn: Ff248074, Ff248075 2 Units 2,000.00 12. Samsung Aircon 1 Unit 1,000.00 13. Various Equipment (2 Units Aircon) 2 Units 1,600.00 14. 3hp Aircon 1 Unit 4,800.00 15. Aircon 1 Unit 800.00 16. Koppel Floor Mounted Aircon - Sn: Dg248016 1 Unit 1,000.00 Starting Bid Price For The Above Units Based On The Coa Region Xi, Appraisal Review Report P 21,000.00 Actual Bid Price Lot 2c – Communication, Medical, Technical And Scientific Equipment Quantity Appraised Value 1. Transit (left Builders Brand) 1 Unit 500.00 2. Ambulance Type Basket Stretcher 1 Unit 100.00 3. Centrifuge (24 Placer) Micro Hematocrit 1 Unit 50.00 4. One (1) Unit Stk Powered Amplifier (paging Type), Three (3) Units Bard Discussion Microphone, Twenty (20) Meters Transparent Speaker Wires, One (1) Unit Next Base Dvd/ Cd/ Mp3 Player, One (1) Pair Bose Loudspeaker 1 Unit 100.00 5. Sound System With Complete Accessories 1 Unit 200.00 6. Sound System 1 Unit 500.00 7. Yamaha Stage Pass 500 Portable Sound System 1 Unit 100.00 8. Pullsfog Thermal Legger 1 Unit 100.00 9. Dental Chair W/ Complete Accessories 1 Unit 100.00 Starting Bid Price For The Above Units Based On The Coa Region Xi, Appraisal Review Report P 1,750.00 Actual Bid Price Lot 3 – Other Scientific Equipment & Waste Materials Quantity Appraised Value 1. Bundy Clock 1 Unit 100.00 2. Polyethylene Tank 1 Unit 1,000.00 3. Farm Tractor Trailer - Fabrication 1 Unit 6,122.33 4. Rubber Boat And Trailer 390cm With 1.5hp Outboard Motor 1 Unit 16,750.00 5. Patrol & Rescue Boat With Complete Accessories 2 Units 15,339.00 6. Motorboat 1 Unit 5,892.86 7. Kayak Inflatable 1 Unit 1,000.00 8. Hydraulic Pump Left Side Function Assembly 1 Unit 100.00 9. Hydraulic Pump Right Side Function Assembly 1 Unit 100.00 10. Hydraulic Steering Pump Assembly 1 Unit 100.00 11. Generating Set 1 Unit 10,900.00 12. Office Furniture With Partition System 1 Unit 500.00 13. Customized Table & Chairs 1 Unit 100.00 14. One (1) Set 58429/ Flex Comfort With Cotton Cover 4x36x75, Three (3) Sets 8907/ B 1t1 Mattress-urethrane Polyster Cover, Four (4) Sets Visitors Chair With Armrest Black, One (1) Set 18651/ Auncn307 Eh Bed In Bag Full, Two (2) Black & Red Modern Office Chair, One (1) 203/ T901+c211 6 Seater Cherry, Two (2) Upholstered Visitors Chair Blue, One (1) 4-seater Upholstered Chair Blue, Two (2) Visitors Chair Blue & One (1) Mesh Black Visitors Chair 1 Unit 100.00 15. Engine 4d56 Non-turbo 1 Unit 2,900.00 16. Generating Set 1 Unit 4,356.00 17. Generating Set (lester Engine) 1 Unit 1,536.27 Waste Materials 18. Used Tires (152 Pcs - Assorted Sizes) - 100.00 / Pc 152 Pcs 15,200.00 19. Batteries (92 Pcs - Assorted Sizes) - 300.00 / Pc 92 Pcs 27,600.00 20. Steel Cabinet (11 Units 4 Drawers, 2 Units 2 Drawers) - 200.00 / Pc 2,000 Kgs 2,600.00 21. Scrap Metals, Spare Parts, Plastic & Computer Chairs (2,000 Kilos) - 12.00 / Kilo 2,000 Kgs 24,000.00 Starting Bid Price For The Above Units Based On The Coa Region Xi, Appraisal Review Report P 136,296.46 Actual Bid Price ______________________________ Signature Of Bidder Deadline Of Submission Of Sealed Proposal Is On November 26, 2024, Tuesday At 2:00pm Thru Asset Disposition Committee (adc) And The Bids And Awards Committee At Bac Conference Room, 2f Annex Bldg., City Hall, City Of Mati, Davao Oriental. Ocular Inspection Is Scheduled On November 20 - 22, 2024 At 9:00 Am To 3:00pm Only Interested Parties May Secure Copy Of This Invitation To The Asset Disposition Committee (adc). 1. All Bids Must Be Accompanied With A Business/mayor’ Permit And Latest Income Tax Return Stamped “received” By Bir Or Its Duly Accredited And Authorized Institutions Shall Be Placed In Sealed Envelope. 2. Bidders Are Required To Enclose / Post A Bidder’s Bond In The Form Of Cash, Cashier Or Manager’s Check Equivalent To Ten Percent (10%) Of The Appraised Value Per Lot. All Bonds Of Non-winning Bidders Are Refundable Immediately After Selection Of Winning Bidder. However, The Winning Bidder’s Bond Shall Only Be Withdrawn Upon Perfection/ Completion Of The Contract. 3. Appraised Value Of The Property For Sale Is Non-negotiable And On An “as-is-where-is” Basis 4. All Expense Related To The Hauling Of These Items Shall Be Borne By The Buyer. 5. Date Of Completion And Full Payment Shall Be Made Not Later Than Three (3) Calendar Days Upon Issuance Of Noticed Of Awards. 6. Non-compliance Of The Winning Bidder On The Above Stipulated Terms And Conditions Shall Be Grounds For The Rejections Of The Bid Without Prejudice To A Re-bidding As The Situation Warrants. The Bidder Is Encouraged To Conduct An Ocular Inspection Of The Property For Sale Before Submitting His/her Proposal. The Head Of The Agency Reserves The Right To Reject Any Or All Of The Bids With Or Without Cause, To Annul The Auction Process, To Waive Any Defect In Them And To Award The Bidder Whose Bid Is The Most Advantageous To The Government. Engr. Crosby B. Balaneg, Ce, Se, Rea, Mpa Chairperson, Asset Disposition Committee

Details: The subject of the performance of this order is the delivery of the performance expected in the framework of the planned subsidy project "development of a standardized nanostructured substrate and an analytical system for routine analysis by surface-enhanced Raman spectroscopy" Registration Number Cz.01.01.01/01/22_002/0000650. The subject of the Public Contract is the Complex Supply of Services United with the Development of the Control System of the Optical and Electronic Subsystems of the Prototype Laser Stereo-lithographic System Working on the Principle of Two Photon Polymerization (slw-2pp). The Public Order includes the supply of services including, in particular, the work of programming the controller SW/firmware based on the requirements described in the technical specification of the order, testing and implementation on the lithographic device. Technical Specification of the Subject of the Contract: A. Modifications and Upgrades of the Control Sw and Fw for the Purpose of Increasing the Production Speed of Existing Lithographic Devices I. Implementation of the Mode of Vector Writing of Structures During the Xy Table Movement With the Possibility of Entering a General Trajectory, for example From a 3d Slicer. II. Design And Implementation Of A Method For Entering Data Bases Using Mathematical Precepts With The Possibility Of Saving These Templates In Libraries For Future Use. III. Sw/fw Solution Options Variable Voxel Size Changes. E.g. Voxel Expansion Using Fast Deflection Unit In Areas With Absence Of Significant Details To Increase Write Speed Iv. Control And Synchronization Of The Deflection Unit (acousto-optic Modulators And Deflectors (aom, Aod). V. Realization Of The Possibility Of Writing A Fill Motif In The Areas Defined By The Mask. Vi. Control Of The Digital Camera Including Image Processing Functions For Autofocus. Vii. Control And Optimization Of The Data And Control Flow Between The Computer Station And Control Cards. Synchronization of the Exposure Process with the Movement of the Piezoelectric Nanopositioning System for the Purpose of Minimizing the Loss of Time During Changes from the Coordinate. X. Optimizing the Communication Between the Control Computer and the Exposure Unit Controlling the Individual Subsystems of the Lithographic Device. B. Modifications and Upgrades of Control Sw and Fw for the Purpose of Increasing the Recording Quality of Existing Lithographic Devices I. Implementation and Testing of Deflection Field Calibration Methods Using Various Tools (Photodiode, Camera, Etc.) Ii Field B. Software Modularization Allowing Simple Addition Or Removal Of Modules (Table Control Module, Aod Control Module, Etc.) C. Creating Dll Api Libraries Of Controlling Sw So That It Is Possible To Call It In An Independent Gui. D. Creation of C++ / Python Interface APIs Including Implementation of Current Vector Mode C-Script Functions in Python. E. Ensuring the Optimization of the Control Sw Based on the Changes of All Extensions and the Above-mentioned Modifications of the Existing System. F. Ensuring Technical and Software Support for the Proper Operation of Systems on which Work is Performed by the Contractor, During the Term of the Contract. The order is not divided into parts. The contracting authority does not intend to discuss offers with the participants within the meaning of Art. 5.4 of the Rules.

Details: Description Quantity Unit Item Description 1 Lot Procurement Of Integrated Full Mission Bridge And Engine Room Simulator With Desktop Station Full Mission Bridge Simulator (fmbs) And Mini Bridge Stations’ Features And Applications, Major Components, Bridge Simulator Performance Standards And Hardware 1. Major Components The Full Mission Bridge Simulators That Can Be Integrated With Engine Simulators Shall Consist Of The Following Major Components: A. One (1) Full Mission Bridge Station With 270° Horizontal Display (class A Configuration); B. Seven (7) Mini Bridge Stations With 120° Horizontal Display (class B Configuration); C. One (1) Server Station; D. One (1) Instructor Station; E. One (1) Simulator Scenario Development Station; And F. One (1) Briefing/ Debriefing Station. 2. Features And Applications 2.1 The Bridge Simulator Should Provide A Realistic, Ship-like Environment Based On Real Hardware Consoles And High-quality Visualization. The Systems Include Major Components Such As Conning, Radar/ Arpa And Ecdis, Gmdss, Navigation Equipment, Bearing Finder, Steering Control Console, Engine Control, Auto Pilot System, Overhead Display, Etc. 2.2 The Bridge Simulator Product Shall Be Certified And Compliant As Class A (full Mission), B (multi-task), C (limited Task), And D (cloud-based Distant Learning) Type-approved Maritime Simulator System By An Internationally Recognized Classification Society. The Compliance With Classification Shall Be Reflected In The Certificate Of The Product. 2.3 The Simulator Can Be Utilized To A Variety Of Navigation Techniques Under Different Environmental Conditions, Serving A Wide Range Of Purposes As Follows: 1. Control Of The Ship While Navigating In The Operational And Emergency Modes In Various Weather Conditions With The Possibility Of Setting Wind And Current Parameters; 2. Analysis Of The Above-water Situation In Day And Night Conditions; In Poor Visibility By Visible Navigation Lights And Information Received From Radar/ Arpa; 3. Use Of The Electronic Chart-based Navigational Information System (ecdis); 4. Practical Use Of Radio Equipment And Global Maritime Distress And Safety System (gmdss) Facilities; 5. Application Of The International Regulations For Preventing Collisions At Sea; 6. Ship Control During Anchoring And Mooring; 7. Ship Control During Towing Operations; 8. Ship Control During Maneuvers "man Overboard"; 9. Rational Methods Of Ship Control In Case Of Main Engines (me) And Ship And Navigation Equipment Failures During Movement; 10. Eye Survey Of Above-water And Radar Situation, Determination Of Vessel Movement Elements; 11. Navigational Situation Assessment By Visual Observation During Daytime, By Lights At Night Time And By Observation Of Transmission Of Echo Signals On Ppi Simulators In Conditions Of Limited Visibility; 12. Visual Determination Of Vessel Movement Patterns, Maneuvering Capabilities And Dimensions; 13. Selection And Execution Of Collision Avoidance Maneuvers In Open Sea, During Night And In Limited Visibility Conditions Using Radar/arpa; 14. Evaluation Of Accuracy Of Primary And Secondary Information Received From Arpa, Consideration Of Factors Affecting Accuracy Of Arpa And Delay In Formation Of Secondary Radar Information; 15. Orientation Of Ships In Complex Navigation Conditions In Daytime And Nighttime And In Conditions Of Limited Visibility; 16. Use Of Ecdis For Preliminary And Executive Plotting, Practicing Correct Response To Emergency Signals Produced By Ecdis, Solution Of Chart-metric Tasks And Ensuring Safety Of Navigation With The Use Of Information Received From Ecdis; 17. Use Of Basic Capabilities Of Marine Mobile Service And Marine Mobile Satellite Service. 2.4 The Bridge Simulator Product Shall Be Able To Address The Following Stcw Competencies And Shall Be Reflected In The Certificate. · Table A-ii/1.1 - Plan And Conduct A Passage And Determine Position. • Table A-ii/1.2 - Maintain A Safe Navigational Watch. • Table A-ii/1.3 - Use Of Radar And Arpa To Maintain Safety Of Navigation. § Table A-ii/1.4 - Use Of Ecdis To Maintain The Safety Of Navigation. • Table A-ii/1.5 - Respond To Emergencies. • Table A-ii/1.6 - Respond To A Distress Signal At Sea. • Table A-ii/1.8 - Transmit And Receive Information By Visual Signaling. • Table A-ii/1.9 - Manoeuvre The Ship. • Table A-ii/2.1 - Plan A Voyage And Conduct Navigation. • Table A-ii/2.2 - Determine Position And The Accuracy Of Resultant Position Fix By Any Means. • Table A-ii/2.3 - Determine And Allow For Compass Errors. • Table A-ii/2.4 - Co-ordinate Search And Rescue Operations. • Table A-ii/2.5 - Establish Watchkeeping Arrangements And Procedures. • Table A-ii/2.6 - Maintain Safe Navigation Through The Use Of Information From Navigation Equipment And Systems To Assist Command Decision-making. • Table A-ii/2.7 - Maintain The Safety Of Navigation Through The Use Of Ecdis And Associated Navigation Systems To Assist Command Decision Making. • Table A-ii/2.10 - Maneuver And Handle A Ship In All Conditions. • Table A-ii/2.11 - Operate Remote Controls Of Propulsion Plant And Engineering Systems And Services. • Table A-ii/3.1 - Plan And Conduct A Coastal Passage And Determine Position. • Table A-ii/3.2 - Maintain A Safe Navigational Watch. • Table A-ii/3.3 - Respond To Emergencies. • Table A-ii/3.4 - Respond To A Distress Signal At Sea. • Table A-ii/3.5 - Manoeuvre The Ship And Operate Small Ship Power Plants. • Table A-ii/4.1 - Steer The Ship And Also Comply With Helm Orders In The English Language. • Table A-ii/4.2 - Keep A Proper Look-out By Sight And Hearing. § Table A-ii/5.2 - Contribute To Berthing, Anchoring And Other Mooring Operations. • Table A-v/4-1.1 - Contribute To Safe Operation Of Vessels Operating In Polar Waters. • Table A-v/4-1.2 - Monitor And Ensure Compliance With Legislative Requirements. • Table A-v/4-1.3 - Apply Safe Working Practices, Respond To Emergencies. • Table A-v/4-1.4 - Ensure Compliance With Pollution-prevention Requirements And Prevent Environmental Hazards. • Table A-v/4-2.1 - Plan And Conduct A Voyage In Polar Waters. • Table A-v/4-2.2 - Manage The Safe Operation Of Vessels Operating In Polar Waters. • Table A-v/4-2.3 - Maintain Safety Of The Ship's Crew And Passengers And The Operational Condition Of Life- Saving, Firefighting And Other Safety Systems. 2.5 The Bridge Simulator Shall Allow For Training And Certification Of Watch Officers, Chief Officers, Captains, And Pilots Serving On Commercial And Fishing Vessels Of 500 Gross Tonnage Or More In Accordance With The Requirements Of The Imo Stcw Convention And Model Courses: · 1.07 – Radar Navigation, Radar Plotting And Use Of Arpa; · 1.08 – Radar, Arpa, Bridge Teamwork And Search & Rescue; · 1.22 – Ship Simulator And Bridge Teamwork; · 1.27 – Operational Use Of Electronic Chart Display And Information System (ecdis); · 1.32 – Operational Use Of Integrated Bridge System; · 1.34 – Operational Use Of Ais; · 2.02 – Maritime Sar Coordinator; · 3.11 – Marine Accident And Incident Investigation With Compendium; · 3.19 – Ship Security Officer; · 3.23 – Actions To Be Taken To Prevent Acts Of Piracy And Armed Robbery; · 7.01 – Master And Chief Mate; · 7.03 – Officer In Charge Of Navigational Watch; · 7.05 – Officer In Charge Of Navigational Watch Of Fishing Vessel; · 1.25 – General Operator’s Certificate For The Gmdss; · 1.26 – Restricted Operator’s Certificate For The Gmdss. 2.6 The Bridge Simulator Shall Have All The Ownship Models, Target Ship Models , Objects And Exercise Areas Available In The Database Of The Simulator Product. It Shall Also Include Polar Areas, The Existing Models And Areas In Current Simulator, Naval And Coast Guard Ship Models, Ship Models Ready For Integration With Engine Simulators And Ship/engine Models Using Future Fuels. 2.7 The Simulator Shall Have Intercom Installed In The Instructor Station And All Bridge Stations. 2.8 The Simulator Shall Have An Evaluation And Assessment Method Designed For The Evaluation And Assessment Of A Range Of Predefined Assessment Parameters From The Following Categories: • Planning And Conducting A Passage And Determine Position; • Maintain Safe Navigational Watch; • Using Radar And Arpa To Maintain Navigational Safety; • Ability To Operate And Analyze Information Obtained From Arpa; • Respond To Emergencies; • Use Imo Standard Marine Communication Phrases And Use English Inwriting And Speaking; • Transmit And Receive Information Using Visual Signals; • Maneuver The Ship; • Colreg. 2.9 The Simulator Shall Have The Ability To Set Up A Scoring And Grading System To Evaluate The Operator’s Performance. The Program Allows The Instructor To Monitor The Results Of The Bridge Team / Operator Workstation Performance. 2.10 The Simulator Shall Be Capable Of Simulating Ship Operation In Polar Waters Or Ice Navigation According To The Polar Code And Shall Have The Following Training Capabilities: - Ice Management Of Offshore Installations In An Arctic Environment, - Use Of Radar Data And Ice Charts In Ecdis While Navigating In Ice Conditions, - Following Of Icebreakers, - Offshore Loading Operations To Include Mooring To Single Point Mooring And Floating Production Storage And Offloading Equipment In Ice Conditions, And - Navigation In Shattered Ice, Along Hard Ice Edges, Bumping Against Ice Edges, In Open Pack Ice, In Ice Holes, And Spots Of Ice-free Water. 2.11 The Ice Navigation Environment Shall Have The Following Characteristics: - Capable Of Ice Accumulation On Ship Superstructure, - Ship’s Tracks On Ice Fields Re-freeze As Programmed By The User, - Ice Mounds And Channels Can Be Added By The User, - Characteristics Of Ice Resistance Are Based On The Type Of Ice, Thickness, And Accumulation, - Capable Of Traversing Large Ice Areas, And - Realistic Representation Of Iceberg Objects. 3. Bridge Simulator Performance Standards 3.1 Physical Realism The Bridge Simulator Stations Shall Have The Following Physical Realism: A. The Equipment, Consoles, And Workstations Shall Be Installed, Mounted, And Arranged In A Manner That Mimics An Actual Bridge Of A Ship. B. The Workstations Shall Have Standard Rubber Mat Flooring. The Simulator Shall Have The Following Equipment: C. Controls Of Propulsion Plant Operations, Including Engine Telegraph, Pitch-control And Thrusters. There Shall Be Indicators For Shaft(s) Revolutions And Pitch Of Propeller(s). There Shall Be Controls For At Least One Propeller And One Bow Thruster. D. Controls Of Propulsion Plant For Mooring Operations. By Any Method, It Shall Be Possible To Observe The Ship's Side And The Dock During Operation Of Such Controls. E. Controls Of Auxiliary Machinery. There Shall Be Controls For At Least Two Auxiliary Engines, Including Electric Power Supply Control. F. Steering Console, Including Equipment For Hand Steering And Automatic Steering With Controls For Switchover. There Shall Be Indicators Of Rudder Angle And Rate Of Turn. G. Steering Compass And Bearing Compass (or Repeater) With An Accuracy Of At Least 1 Degree. H. At Least One Radar/arpa Display/unit (automatic Radar Plotting Aid). It Shall Be Possible To Simulate Both A 10 Cm (s-band) And A 3 Cm (x-band) Radars. The Radar Shall Be Capable To Operate In The Stabilised Relative-motion Mode And Sea- And Ground-stabilised True-motion Modes (see Stcw Section A-1/12.4.1 And 1/12.5 And Paragraph 2 Of Section B-i/12). I. Communication Equipment Per Gmdss (global Maritime Distress Safety System) Framework, Covering At Least The Requirements For The Relevant Area. J. The Simulator Shall Include A Communications System That Will Allow For Internal Ship Communications To Be Conducted. K. Ecdis (electronic Chart Display And Information System) Displaying Selected Information From A System Electronic Navigational Chart (senc) With Positional Information From Navigation Sensors Like Ais And Radar To Assist The Mariner In Route Planning And Route Monitoring, And By Displaying Additional Navigation-related Information. (see Stcw Section B-i/12). L. Gps (global Positioning System), Echo-sounder And Speed Log Showing Speed Through The Water (1 Axis) For Ships Below 50,000 Grt And In Addition Speed And Distance Over Ground In Forward And Athwart Ship Direction For Ships Above 50,000 Grt. M. Instrument (anemometer) For Indication Of Relative Wind- Direction And Force. N. Ship Sound Signal Control Panel According To Colreg. O. Instrument For Indication Of Navigational Lights. P. Function For Transmitting Visual Signals (morse Light). Q. Control System For General Alarm And Fire Detection/alarm And Other Alarms. R. Ais (automatic Identification System). S. Ship-borne Meteorological Instrument. The Simulator Shall Have The Following Additional Requirements For Training In Ice Navigation: T. Controls For Propulsion Plant Operations, Including Engine Telegraph, Pitch Control, And Thrusters. There Shall Be Indicators For Shaft Revolutions And Pitch Of Propeller. There Shall Be Controls For At Least One Propeller And One Bow Thruster. U. Two Speed And Distance Measuring Devices. Each Device Should Operate On A Different Principle, And At Least One Device Should Be Capable Of Being Operated In Both The Sea And The Ground Stabilized Mode. V. Searchlight Controllable From Conning Positions. W. Manually Operated Flashing Red Light Visible From Astern To Indicate When The Ship Is Stopped. X. Vdr (voyage Data Recorder) Or Capability For Vessel History Track And Learner Actions Log From The Instructor And The Assessor Position. Y. Equipment Capable Of Receiving Ice, Icing Warnings, And Weather Information Charts. Z. Anchoring And Towing Arrangements. The Simulator Shall Have The Following Additional Requirements For Training In Integrated Bridge Systems Including Integrated Navigation Systems: Aa. Workstation For Navigating, Maneuvering And Monitoring Consisting Of: · Radar/arpa · Ecdis · Conning Display · Binoculars Control · Autopilot Control · Observer Position/ Visual Control · Information On Position-fixing Systems · Information On Ship Automatic Identification System (ais) · Heading Control System · Flags, Daytime Shapes And Sound Signals · Control For The Main Engine Including Emergency Stop · Control For The Main Rudder Using Helm · Controls For Thruster · Two-way Vhf Radiotelephone (walkie-talkie) With Charging Connection · Internal Communication Equipment · Public Address System · Vhf With Channel Selector · Remote Control For Searchlight · Rudder Pump Selector Switch · Steering Mode Selector Switch · Steering Position Selector Switch · Illumination Of Equipment And Displays In The Surrounding Darkness · Sound Reception System · Acknowledgment Of The Watch Alarm · Controls For Console Lighting · Indicators For: - Propeller Revolutions (actual And Desired) - Main Engine Revolution In The Case Of Reduction Geared Engine - Propeller Pitch In The Case Of Controllable Pitch Propeller - Torque - Starting Air - Lateral Thrust - Speed - Rudder Angle - Rate-of-turn - Gyro Compass Heading - Magnetic Compass Heading - Heading Reminder (pre-set Heading) - Water Depth Including Depth Warning Adjustment - Time - Wind Direction And Velocity - Air And Water Temperature - Clinometer - Alarms · Signal Transmitter For: - Whistle - Automatic Device For Fog Signals - Alarms, (general Alarm, Emergency Alarm, Etc.) - Morse Signaling Light Bb. Workstation For Manual Steering (wheelhouse) Consisting Of: · Steering Wheel · Rudder Pump Selector Switch · Indications For: - Gyro Compass Heading - Magnetic Compass Heading - Pre-set Heading - Rudder Angle - Rate Of Turn Cc. Workstation For Planning And Documentation Consisting Of: · Ecdis Including Navigation Planning Station · Route Planning Devices · Chart Table · Paper Charts · Plotting Aids Dd. Workstation For Communications Consisting Of: · Gmdss Equipment As Required For The Applicable Sea Area · Vhf-dsc, Radiotelephone · Mf-dsc, Radiotelephone · Mf/hf-dsc, Nbdp, Radiotelephone · Mf/hf Mf/hf Radio Telex · Inmarsat-ses, Egc Rx With Lrit And Ssas · Navtex/egc/hf Direct Printing Telegraph · Fbb/iridium · Cospas-sarsat Epirb · Sart · Ais Sart · Main Station For Two-way Vhf Radiotelephone · Aircraft Vhf Radiotelephone · Gmdss Alarm Panel · Radio Direction Finder Rt-500-m (marine) · Power Switchboard · Battery Charger · Virtual Printer Ee. All Systems Related To The Integrated Bridge System Shall Include Failure Control(s) And Method(s) To Train And Assess The Learner In The Use Of Advanced Equipment, Technology And Enable Familiarization And Training To Understand The Limitations Of Automatic Systems. 3.2 Behavioral Realism The Bridge Simulator Stations Shall Have The Following Behavioral Realism: A. The Simulation Of Ownship Shall Be Based On A Mathematical Model With 6 Degrees Of Freedom. B. The Model Shall Realistically Simulate Own Ship Hydrodynamics In Open Water Conditions, Including The Effects Of Wind Forces, Wave Forces, Tidal Stream And Currents. C. The Model Shall Realistically Simulate Own Ship Hydrodynamics In Restricted Waterways, Including Shallow Water And Bank Effects, Interaction With Other Ships And Direct, Counter And Sheer Currents. D. The Simulator Shall Include Mathematical Models Of Different The Types Of Ownships. E. The Simulator Shall Include Tug Models That Can Realistically Simulate Tug Assistance During Maneuvering And Escort Operations. It Shall Be Possible To Simulate Pull, Push, Reposition Towing And Escorting. F. The Simulator Shall Include Exercise Areas Including Correct Data For Landmass, Depth, Buoys, Tidal Streams And Visual As Appropriate To The Nautical Chart And Publication Used For The Relevant Training Objectives. G. The Radar Simulation Equipment Shall Be Capable Of Model Weather, Tidal Streams, Current, Shadow Sectors, Spurious And False Echoes And Other Propagation Effects, And Generate Coastlines, Navigational Buoys And Search And Rescue Transponders. H. The Arpa Simulation Equipment Shall Incorporate The Facilities For: - Manual And Automatic Target Acquisition - Fast Track Information - Use Of Exclusion Areas - Vector/graphic Time-scale And Data Display - Trial Maneuvers. I. The Ecdis Simulation Equipment Shall Incorporate The Facilities For: - Integration With Other Navigation Systems - Own Position - Sea Area Display - Mode And Orientation - Chart Data Displayed - Route Monitoring - User-created Information Layers - Contacts (when Interfaced With Ais And/or Radar Tracking) - Radar Overlay Functions. J. The Simulator Shall Provide An Own Ship Engine Sound, Reflecting The Power Output. K. The Simulator Shall Provide Capabilities For Realistically Conduct Anchoring Operations. L. The Model Shall Realistically Simulate Own Ship Hydrodynamics In Interaction With Applicable Anchor And Chain Dimensions With Different Bottom Holding Grounds, Including The Effects Of Wind Forces, Wave Forces, Tidal Stream And Currents. M. The Simulator Shall Provide Capabilities For Realistically Simulate The Function Of Mooring And Tug Lines And How Each Line Functions As Part Of An Overall System Taking Into Account The Capacities, Safe Working Loads, And Breaking Strengths Of Mooring Equipment Including Mooring Wires, Synthetic And Fiber Lines, Winches, Anchor Windlasses, Capstans, Bitts, Chocks And Bollards. The Simulator Shall Have The Following Additional Requirements For Training In Ice Navigation: N. The Own Ship Model Shall Realistically Simulate Hydrodynamics In Interaction With Solid Ice Edge. O. The Own Ship Model Shall Realistically Simulate Hydrodynamics And Ice Pressure In Interaction With Solid And Packed Ice. Ship Motion In Solid Ice Should Affect At Least Ship Speed And Turning Radius. P. The Own Ship Model Shall Realistically Simulate The Effects Of Reduced Stability As A Consequence Of Ice Accretion. Q. It Shall Be Possible To Simulate The Effect Of The Following Ice Conditions With Variations: - Ice Type - Ice Concentration - Ice Thickness. R. It Shall Be Possible To Realistically Simulate The Towing Of Ownship – Ownship, And Own Ship Target Ship And Target Ownship. It Shall Be Possible To Introduce Different Towing Gear Like Rope Or Steel Wire With Different Strength And Elasticity, Forward, Stern And Side Towing. S. It Shall Be Possible To Realistically Simulate The Interaction Between The Ships Propeller Wash And The Ice. T. It Shall Be Possible To Realistically Simulate Ice Drift. U. The Simulator Shall Be Equipped With Iceberg Targets Of At Least Six Different Sizes Including Realistic Underwater Bodies Which Interacts With The Sea Bottom. The Icebergs Should Be Visible On The Ship's Radar. V. Motion Through Ice Hummocks Should Be Simulated Realistically Considering Ship Icebreaking Capabilities And Affect Ship's Speed, Roll And Pitch. The Simulator Shall Have The Following Additional Requirements For Training In Integrated Bridge Systems Including Integrated Navigation System: W. The Integrated Navigation System Should Combine Process And Evaluate Data From All Sensors In Use. The Integrity Of Data From Different Sensors Should Be Evaluated Prior To Distribution. X. The Integrated Navigation System Shall Ensure That The Different Types Of Information Are Distributed To The Relevant Parts Of The System, Applying A Consistent Common Reference System For All Types Of Information. Y. The Integrated Navigation System Shall Provide Information On Position, Speed, Heading, And Time. Z. The Integrated Navigation System Shall Be Able To Automatically, Continually And Graphically Indicate The Ship's Position, Speed And Heading And, Where Available, Depth In Relation To The Planned Route As Well As To Known And Detected Hazards. Aa. The Integrated Navigation System Shall, In Addition, Provide Means To Automatically Control Heading, Track Or Speed, And Monitor The Performance And Status Of These Controls. Bb. Alarms Shall Be Displayed So That The Alarm Reason And The Resulting Functional Restrictions Can Be Easily Understood. 3.3 Operating Environment The Bridge Simulator Shall Exhibit The Following Operating Environment: A. The Simulator Shall Be Able To Present Different Types Of Target Ships, Each Equipped With A Mathematical Model, Which Accounts For Motion, Drift And Steering Angles According To Forces Induced By Current, Wind Or Wave. B. The Targets Shall Be Equipped With Navigational And Signal-lights, Shapes, And Sound Signals, According To Rules Of The Road. The Signals Shall Be Individually Controlled By The Instructor, And The Sound Signals Shall Be Directional And Fade With Range. Each Ship Shall Have An Aspect Recognizable At A Distance Of 6 Nautical Miles In Clear Weather. A Ship Underway Shall Provide Relevant Bow- And Stern Wave. C. The Simulator Shall Be Equipped With Targets Enabling Search And Rescuing Persons From The Sea, Assisting A Ship In Distress And Responding To Emergencies Which Arise In Port. Such Targets Shall At Least Be: · Rocket Parachute Flares · Hand Flares · Buoyant Smoke Signals · Sart (search And Rescue Transponder) · Satellite Epirb (emergency Position Indicating Radio Beacon) · Lifeboat · Life Raft · Rescue Helicopter · Rescue Aircraft · People In Water. D. The Simulator Shall Be Able To Present At Least 20 Target Ships At The Same Time, Where The Instructor Shall Be Able To Programme Voyage Routes For Each Target Ship Individually. (see Stcw Section A-1/12.4.3) E. The Simulator Shall Provide A Realistic Visual Scenario By Day, Dusk Or By Night, Including Variable Meteorological Visibility, Changing In Time. It Shall Be Possible To Create A Range Of Visual Conditions, From Dense Fog To Clear Conditions. F. The Visual System And/or A Motion Platform Shall Replicate Movements Of Own Ship According To 6 Degrees Of Freedom. G. The Projection Of The View Shall Be Placed At Such A Distance And In Such A Manner From The Bridge Windows That Accurate Visual Bearings May Be Taken To Objects In The Scene. It Shall Be Possible To Use Binocular Systems For Observations. H. The Visual System Shall Present The Outside World By A View Around The Horizon (360°). The Horizontal Field Of View May Be Obtained By A View Of 270° And Where The Rest Of The Horizon May Be Panned (to Move The “camera”). (applicable Only To Full Mission Bridge Station With 270° Horizontal Display) I. The Visual System Shall Present The Outside World By A View Of At Least 120° Horizontal Field Of View. In Addition, At Least The Horizon From 120° Port To 120° Starboard Shall Be Able To Be Visualised By Any Method. (applicable Only To Mini Bridge Station With 120° Horizontal Display). J. The Visual System Shall Present A Vertical View From The Workstations For Navigation, Traffic Surveillance And Manoeuvring Enabling The Navigator To Detect And Monitor Objects Visually On The Sea Surface Up To The Horizon Within The Required Horizontal Field Of View When The Ship Is Pitching And Rolling. In Addition, By Any Method, It Shall Be Possible To Observe The Ship's Side And The Dock During Mooring Operations. K. The Visual System Shall Present All Navigational Marks According To Charts Used. L. The Visual System Shall Show Objects With Sufficient Realism (detailed Enough To Be Recognized As In Real Life). M. The Visual System Shall Show Mooring And Towing Lines With Sufficient Realism In Accordance With The Forces Effecting The Tension. N. The Visual System Shall Provide A Realistic Set Of Bow Wave, Sea Spray And Wakes In Accordance With Ships Power Output, Speed And Weather Conditions. O. The Visual System Shall Provide A Realistic Set Of Flue Gas Emission And Waving Flag Effect In Accordance With Ships Power Output, Speed And Weather Conditions. P. The Simulator Shall Be Capable Of Providing Environmental Sound According To Conditions Simulated. Q. The Navigated Waters Shall Include A Current Pattern, Changeable In Time, According To The Charts Used. Tidal Waters Shall Be Reflected. R. The Simulation Shall Include The Depth According To Charts Used, Reflecting Water Level According To Tidal Water Situation. S. The Simulator Shall Provide At Least Two Different Wave Spectra, Variable In Direction Height And Period. T. The Visual System Shall Provide A Realistic Set Of Wind Waves Including White Caps According To The Beaufort Wind Force Scale. The Simulator Shall Have The Following Additional Requirements For Training In Ice Navigation: U. The Visual System Shall Be Capable Of Showing Concentrations Of Solid And Broken Ice Of Different Thickness. V. The Visual System Shall Be Capable Of Showing The Result Of Icebreaking Including Opening, Twin Breaking And Compacting Channel. W. The Visual System Shall Be Capable Of Showing The Effects Of Searchlight. X. The Visual System Shall Be Capable Of Showing The Effects Of The Ice Accretion To The Own Ship Model. The Simulator Shall Have The Following Additional Requirements For Training In Integrated Bridge Systems Including Integrated Navigation Systems: Y. There Shall Be A Field Of View Around The Vessel Of 360° Obtained By An Observer Moving Within The Confines Of The Wheelhouse Or May Be Panned (to Move The Camera). 4. Hardware Requirements 1 Set 4.1 Full Mission Bridge Simulator (horizon Field View Of 270 Degrees) A. Steel Fabrication Of Main Bridge Consoles Consisting Of: I. Conning/maneuvering Console Ii. Radar Console Iii. Ecdis Console Iv. Bearing Console V. Navigation Aid Equipment Console Vi. Gmdss Console Vii. Steering Stand/console Viii. Chart Table Ix. Overhead Panel X. Gyro Repeater With Pelorus Stand Xi. Binoculars Xii. The Console Must Made Of Steel W/ Handrails B. Visual Specification (minimum Requirements) I. 9x 70” Visual Screens Led Backlit 1. Pc Visual Channel 2. Intel Core I5 Processor 3. 16 Gb Ram 4. 256 M.2 Ssd 5. Rtx 4070 Or Higher 6. Keyboard/mouse 7. Hdmi Cable 8. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator C. 1x Conning Console (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. 2x Monitor 24” 5. Keyboard/mouse 6. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator 7. Console Made Of Steel (tct 0.8 Mm To 2 Mm) 8. Instrument Adds On Conning Console. D. 2x Ecdis Console (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. Monitor 24” 5. Keyboard/mouse 6. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator 7. Console Made Of Steel (tct 0.8 Mm To 2 Mm) E. 2x Radar / Arpa Console (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. Monitor 24” 5. Keyboard/mouse 6. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator 7. Console Made Of Steel (tct 0.8 Mm To 2 Mm) F. Binocular And Instrument (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2. Ssd 4. Rtx 4070 Or Higher 5. Keyboard/mouse 6. 2x 24" Monitor 7. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator 8. Console Made Of Steel (tct 0.8 Mm To 2 Mm) G. Overhead Panel Display 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. At Least 1width And 0.4height 5. Keyboard/mouse 6. Ups 1kva A. Surge Protection B. W/ Automatic Voltage Regulator H. Radar/arpa I. Radar/arpa Keyboard (1 Set) Specifications: 1. Usb Interface 2. Console Mount Type I. Handset I. Handset Includes: 1. Handset 2. Cradle With A Ptt Switch 3. Usb Interface Board 4. Handset Box J. 1x Chart Table Console 1300mm X 1312mm (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. 2x Monitor 24” 5. Keyboard/mouse 6. Ups 1kva A. Surge Protection B. W/ Automatic Voltage Regulator Ii. 1x Parallel Ruler Iii. 1x One-hand Compass Divider Steel Iv. 10x Plotting Triangle With Handle V. 1x Deck Log Book Vi. 1x Night Order Book Vii. 1x Bell Book Viii. 1x Chronometer Ix. Admiralty Paper Charts Related To Installed Maps In Simulator K. Gyro Repeater With Pelorus Stand 1. Bearing Repeater Compass 2. Pelorus Stand 3. Power: 24vd 4. Signal: Rs422 Nmea L. Weather Instruments 1. 1x Ships Clock 2. 1x Aneroid Barometer 3. 1x Hygrometer. M. Speaker With Subwoofer I. Channel Sound System Specification: 1. Interface With Visual Pc 2. Realization Of 3d Sound Effect System 3. Atleast 450watts Speaker With Subwoofer 4. Port: Mini Jack 7 Sets 4.2 Mini Bridge Simulator (horizon Field View Of 120 Degrees) A. Consoles Made In Formica Laminated Board Fabrication Of Main Bridge Consoles Consisting Of: I. Conning Console Ii. Radar Console Iii. Ecdis Console Iv. Maneuvering Console V. Chart Table With Gooseneck Dimming Light B. Mini Bridge Desktop Station (bridge Image Generator Computer For Visual, Conning, Radar, Maneuvering And Overhead Display) I. 3x 45” 4k Display For Visual (minimum Requirements) Ii. 1x Computer (minimum Requirements) 1. 256 M.2 Ssd 2. Rtx 4070 Or Higher 3. 1 X Keyboard/mouse 4. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator Iii. 1 X Computer (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. Keyboard/mouse 5. 24” Monitor 6. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator Iv. 1 X Overhead Panel Display V. 1 X Speakers (minimum Requirements) 1. Interface With Visual Pc 2. Realization Of 3d Sound Effect System 3. Atleast 150 Watts Speaker With Subwoofer 4. Port: Mini Jack Vi. 1 X Goose Neck Microphone Vii. 1 X Set Desktop Instrument Console Including: 1. Steering System / Autopilot / Nfu 2. Steering Wheel Viii. Dual Telegraph 1. 1 X Console Tables 2. 1 X Handheld Uhf Equipment 3. 1 X Console Made In Formica Laminated Board (tct 3/4 Inches) Ix. Chart Table And Plotting Aids (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. 1x Monitor 24” 5. Keyboard/mouse 6. Ups 1kva A. Surge Protection B. W/ Automatic Voltage Regulator X. 1x Parallel Ruler Xi. 1x One-hand Compass Divider Steel Xii. 1x Plotting Triangle With Handle Xiii. 1x Chart Table At Least 1000mm X 700mm Xiv. 1x Deck Log Book Xv. 1x Night Order Book Xvi. 1x Bell Book Xvii. 1x Chronometer 1 Set 4.3 Bridge Instructor Station A. Instructor Station I. 1x Computer (minimum Requirements) 1. 2x 24” Monitor 2. Intel Core I5 Processor 3. 16 Gb Ram 4. 256 M.2 Ssd 5. Rtx 4070 Or Higher 6. Keyboard/mouse 7. Ups 1.5kva 1. Surge Protection 2. W/ Automatic Voltage Regulator Ii. 1x Handset 1. Handset 2. Cradle With A Ptt Switch 3. Usb Interface Board 4. Handset Box Iii. 1x Speaker 1. Type: Desktop 2. Port: Mini Jack Iv. 1x Steel Cabinet W/ Lock 1. Metal Drawer Office Drawer 2. File Cabinet Storage With Wheel V. 1x Drone View Monitor W/ Smart Tv 55” Tv Led (environment View Of Instructor) Vi. 1x Smart Tv 55” Tv Led For Cctv Vii. 1x Printer 1. Laser Printer A4 2. A4 Print Speed Up To 48 Ppm 3. Auto 2-sided (duplex) Printing, 1-line Lcd 4. Wifi, Airprint, Mopria, Wifi Direct, Lan, Usb 2.0 5. Colored Printer Viii. Instructor Station Table Specification: Ix. 1x Table Size: At Least L 1700 X W 700 X H 750 Mm 1. Material: Formica Matt Laminate On Chipboard X. Intercom Telephone / Public Announcement System Xi. 9x Two-way Vhf Radiotelephone (walkie-talkie) With Charging Connection Xii. 1x Ergodynamic Chair Xiii. 1x Document Metal Cabinet With Glass Sliding Door 1. Size: 1850x 400mmx 900mm 2. Door Lock 1 Set 4.4 Bridge Simulator Scenario Development Station B. Scenario Development Station As An Instructor Station Capable Of Deploying Scenarios To Other Stations. I. 1x Computer (minimum Requirements) 1. 2x 24” Monitor 2. Intel Core I5 Processor 3. 16 Gb Ram 4. 256 M.2 Ssd 5. Rtx 4070 Or Higher 6. Keyboard/mouse 7. Ups 1.5kva 1. Surge Protection 2. W/ Automatic Voltage Regulator Ii. 1x Table Size: At Least L 1200 X W 800 X H 750 Mm 1. Material: Formica Matt Laminate On Chipboard Iii. 1x Ergodynamic Chair 5. Software Requirements 5.1 Full Mission Bridge Simulator The Full Mission Bridge Simulator Shall Have The Following Software And Controls For The Following Workstations: A. Workstation For Navigating, Maneuvering And Monitoring Consisting: · One (1) Ecdis Master Software · One (1) Ecdis Slave Software · One (1) Conning Display Software · One (1) Radar/arpa 3cm · One (1) Radar/arpa 10cm · Nine (9) Realistic Visualization Software With 270° Field Of View · Keyboard And Trackball Controls For Ecdis, Radar Apra And Conning Display · Two (2) Vhf Dsc Radio W Ch16 · One (1) Overhead Panel Display · One (1) Main Engine Telegraph Including Emergency Stop Control With Printer · One (1) Bow And Stern Thruster Control · One (1) Gps Software · One (1) Bridge Navigational Watch Alarm System (bnwas) · One (1) Echo Sounder · One (1) Speed Log · One (1) Vr Binoculars · One (1) Observer Position/ Visual Control · One (1) Anchor Gear And Mooring Operations Control · One (1) Towing Control · One (1) Tugs Control · One (1) Autopilot Control System · Nfu/ Fu Controls · One (1) Tiller Controls · One (1) Information On Ship Automatic Identification System (ais) · One (1) Intercom Telephone Capable For Public Address System · One (1) Conference Microphone · One (1) Control For Searchlight · One (1) Gyro Repeater/pelorus Stand That Can Display Magnetic And Gyro Compass · One (1) Bearing Finder · One (1) Alarm System Panel For General Alarm, Fire Alarm, And Other Alarms · Navigation Lights Control · Flags, Daytime Shapes And Sound Signals Control · One (1) Two-way Vhf Radiotelephone (walkie-talkie) With Charging Connection · Sound Reception System · Acknowledgment Of The Watch Alarm · Information Indicators For: - Propeller Revolutions (actual And Desired) - Main Engine Rpm - Main Engine Revolution In The Case Of Reduction Geared Engine - Propeller Pitch In The Case Of Controllable Pitch Propeller - Torque - Starting Air - Lateral Thrust - Log Speed And Speed Over The Ground - Bow And Stern Speed - Athwartship Speed - Rudder Angle - Rate-of-turn - Gyro Compass Heading - Magnetic Compass Heading - Heading Reminder (pre-set Heading) - Water Depth Including Depth Warning Adjustment - Vessel Time - Wind Direction And Velocity - Air And Water Temperature - Clinometer - Alarms - Pilot Card - Maneuvering Characteristics - Scoring Exercise/ Assessment · Signal Transmitter For: - Whistle - Automatic Device For Fog Signals - Alarms, (general Alarm, Emergency Alarm, Etc.) - Morse Signaling Light B. Workstation For Manual Steering (wheelhouse) Consisting Of: · One (1) Steering Wheel · Rudder Pump Selector Switch · Steering Mode Selector Switch · Steering Position Selector Switch · Indications For: - Gyro Compass Heading - Magnetic Compass Heading - Pre-set Heading - Rudder Angle - Rate Of Turn - Steering Mode (fu/nfu) – Track Control/auto Navigation C. Workstation For Route Planning And Documentation Consisting Of: · Computer For Route Planning Devices (ecdis) · Chart Table With Drawers For Paper Charts, Flags And Pennants · Paper Charts · Plotting Aids · Chronometer · Weather Facsimile D. Workstation For Communications Consisting Of: · One (1) Handset For Radiotelephone · Gmdss Equipment As Required For The Applicable Sea Area · Vhf-dsc, Radiotelephone · Mf-dsc, Radiotelephone · Mf/hf-dsc, Nbdp, Radiotelephone · Mf/hf Mf/hf Radio Telex · Inmarsat-ses, Egc Rx With Lrit And Ssas · Navtex/egc/hf Direct Printing Telegraph · Fbb/iridium · Cospas-sarsat Epirb · Sart · Ais Sart · Main Station For Two-way Vhf Radiotelephone · Aircraft Vhf Radiotelephone · Gmdss Alarm Panel · Radio Direction Finder Rt-500-m (marine) · Power Switchboard · Battery Charger · Virtual Printer 5.2 Mini Bridge Simulator The Mini Bridge Simulators Shall Have Each Of The Following Software And Controls For The Following Workstations: E. Workstation For Navigating, Maneuvering And Monitoring Consisting: · One (1) Ecdis Master Software · One (1) Conning Display Software · One (1) Radar/arpa Interchangeable To 3cm & 10cm · Three (3) Realistic Visualization Software With 120° Field Of View · Keyboard And Trackball Controls For Ecdis, Radar Apra And Conning Display · One (1) Vhf Dsc Radio W Ch16 · One (1) Overhead Panel Display · One (1) Main Engine Telegraph Including Emergency Stop Control With Printer · One (1) Bow And Stern Thruster Control · One (1) Gps Software · One (1) Bridge Navigational Watch Alarm System (bnwas) · One (1) Echo Sounder · One (1) Speed Log · One (1) Vr Binoculars · One (1) Observer Position/ Visual Control · One (1) Anchor Gear And Mooring Operations Control · One (1) Towing Control · One (1) Tugs Control · One (1) Autopilot Control System · Nfu/ Fu Controls · One (1) Tiller Controls · One (1) Information On Ship Automatic Identification System (ais) · One (1) Intercom Telephone Capable For Public Address System · One (1) Conference Microphone · One (1) Control For Searchlight · One (1) Vdr Remote Alarm Panel · One (1) Bearing Finder · One (1) Alarm System Panel For General Alarm, Fire Alarm, And Other Alarms · Navigation Lights Control · Flags, Daytime Shapes And Sound Signals Control · One (1) Two-way Vhf Radiotelephone (walkie-talkie) With Charging Connection · Sound Reception System · Acknowledgment Of The Watch Alarm · Information Indicators For: - Propeller Revolutions (actual And Desired) - Main Engine Rpm - Main Engine Revolution In The Case Of Reduction Geared Engine - Propeller Pitch In The Case Of Controllable Pitch Propeller - Torque - Starting Air - Lateral Thrust - Log Speed And Speed Over The Ground - Bow And Stern Speed - Athwartship Speed - Rudder Angle - Rate-of-turn - Gyro Compass Heading - Magnetic Compass Heading - Heading Reminder (pre-set Heading) - Water Depth Including Depth Warning Adjustment - Vessel Time - Wind Direction And Velocity - Air And Water Temperature - Clinometer - Alarms - Pilot Card - Maneuvering Characteristics - Scoring Exercise/ Assessment · Signal Transmitter For: - Whistle - Automatic Device For Fog Signals - Alarms, (general Alarm, Emergency Alarm, Etc.) - Morse Signaling Light F. Workstation For Manual Steering (wheelhouse) Consisting Of: · One (1) Steering Wheel · Rudder Pump Selector Switch · Steering Mode Selector Switch · Steering Position Selector Switch · Indications For: - Gyro Compass Heading - Magnetic Compass Heading - Pre-set Heading - Rudder Angle - Rate Of Turn - Steering Mode (fu/nfu) G. Workstation For Route Planning And Documentation Consisting Of: · Computer For Route Planning Devices (ecdis) · Chart Table With Drawers For Paper Charts, Flags And Pennants · Paper Charts · Plotting Aids · Chronometer H. Workstation For Communications Consisting Of: · One (1) Handset For Radiotelephone · Gmdss Equipment As Required For The Applicable Sea Area · Vhf-dsc, Radiotelephone · Mf-dsc, Radiotelephone · Mf/hf-dsc, Nbdp, Radiotelephone · Mf/hf Mf/hf Radio Telex · Inmarsat-ses, Egc Rx With Lrit And Ssas · Navtex/egc/hf Direct Printing Telegraph · Fbb/iridium · Cospas-sarsat Epirb · Sart · Ais Sart · Main Station For Two-way Vhf Radiotelephone · Aircraft Vhf Radiotelephone · Gmdss Alarm Panel · Radio Direction Finder Rt-500-m (marine) · Power Switchboard · Battery Charger · Virtual Printer 5.3 Instructor Station 1. The Instructor Workstation Is An Integral Part Of The Simulator And Is Designed To Control The Training Complex, Design (develop) Exercises, Perform Exercises In Real Time, Control Exercise Performance By Trainees, Change Environmental Conditions And Sailing Circumstances, As Well As Enter Own Ship Failure Variables, Document, And Archive The Position And Activity Of The Ship Involved In The Exercise. The Instructor Station Software Should Contain Navigation Areas As Well As Sub-tasks For Each Area, Allowing The Control Of All Active Vessels And Target Ships. 2. Navigation Instructor Software Includes: · Navigation Instructor · Evaluation And Assessment · Tug And Mooring · Radar/arpa · Electronic Navigational Chart: · Bird Eye Of Instructor · Debriefing System 3. Simulator Session(s) Control: • Exercise(s) Start, Pause, Re-start After The Pause, Stop On Bridge(s); • Setting The Initial Position For Own Ships; • Entering Faults Of Navigation Systems, Steering Gear, Propulsion Plant, Fire And General Alarm; • Ability To Set Faults Of Navigational Equipment; • Pulling Apart Ships That Have Collided Or Run Aground; • Control Of Target Vessels, Hoisting Flags Of The International Code Of Signals, Turning Their Sound Signals On And Turning Their Lights On/off; 4. The Software Modules Should Provide A Possibility To Flexibly Configure The Required Bridge Configuration. General: · An Integrated Application For Exercise Editing, Conducting And Debriefing; · Highly Accurate Data Representation Based On Vector Diagrams (ability To Automatically Load All Diagrams Related To The Selected Game Area); · Tools For Creating Exercises And Automatic Competency Assessment Scenarios; · Displaying Of The Actual Ship Contours; · Display Of Object Tracks: Contour Or Point With Selectable Resolution, Track History And Time Stamps; · Using The Mouse Wheel For Chart Scaling; · Control Of Simulator Session(s); · Continuous Automatic Recording Of Data During Exercise (main, Audio And Video Log Files); · Real Time, Slow Time, And Fast Time Modes; · Ability To Display And Print A New Pilot Card And A Table Of Maneuvering Characteristics Of The Ship; · Setting Parameters And Faults Of Navigation Equipment: Radar, Gps, Loran C, Log, Gyro, Echo Sounder, Uais; · Setting Weather And Bathymetric Conditions: Global And Local Zones, Import Of Tide And Current Databases (ecdis); · Working With Measuring Tools: - Ability To Set Erbl; - Ability To Attach, Move Or Delete Erbl During An Exercise; 9. Ability To Attach Sart To The Life Raft; 5. Ability To Move Own Ship During Exercise Without Grounding Or Collision; 6. Ability To Apply Virtual Tug Force To 8 Points Of The Vessel’s Hull In Any Direction; 7. Display Of Actual Ship's Contours; 8. Continuous Display Of Parameters Of Vessel Movement And Environment Conditions: Course And Speed Of The Vessel, Course Over The Ground, Transversal Component Of Speed On The Bow And On The Stern, Gyro Heading, Rate Of Turn, Speed And Direction Of The Current And Wind, Height And Direction Of A Wave, Depth; 9. Independent Instructor Control For Wind And Swell Components Of The Wave; 10. Ability To Set Sea State Spectrum: · Pierson-moskowitz; · Phillips; · Ittc (international Towing Tank Conference); · Jonswap (joint North Sea Wave Project); · User. 11. Ability To Exclude Hydrodynamic Interaction With Mooring Walls In The Required Area; 12. Ability To Create A Template Containing A Set Of Objects (ships), Save And Use This Template In Other Exercises; 13. Ability To Save Environment Settings As A Template And Load A Previously Saved Template In Any Exercise And Area; 14. Mooring Operations: · Ability To Set The Rope Material; · Ability To Set The Initial State Of The Mooring Winch (render, Slack Away, Stop); · Ability To Set Mooring Winch Parameters (speed, Pulling Force, Holding Force); · Ability To Operate The Mooring Winch At The Instructor Workplace. 15. Anchor Operations: · Ability To Set User Ground Type With Required Anchor Holding Force Coefficients; · Display Of Anchor Position On The Instructor's Chart On The Ground. 16. Control Of Navigational Lights And Shapes: · Ability To Control The Navigational Lights; · Ability To Switch On/off Deck Lights On Target Ships. 17. Loading/discharging Of Own Ship During Exercises; 18. Weather Conditions Manager: · Ability To Set Predefined Weather Conditions By Beaufort Number (wind, Wave, Whitecaps And Foam, 3d Clouds, Cloud Layer, Visibility) On The Fly; · Ability To Set Customized Weather Conditions; · Visual Effects: Rain And Snow (low, Medium, High), Lightning, Reflection, Translucency, Sea With White Caps, Foam, Splashes, Bow-wave; · Separate Settings For Wind Wave And Swell; · Manual Control Of Wind Direction And Strength; · Adjustment Of Atmospheric Parameters – Temperature, Humidity, Pressure; · Ability To Use Thunderstorm, Precipitation; · Automatic Calculation Of The Position Of The Sun, Moon, Major Stars (up To 100) And Constellations, The Angle And Phase Of The Moon; · Ability To Set Wave Spectrum Type: Pierson-moskowitz; Jonswap (joint North Sea Wave Project); Phillips; User-defined; · Ability To Use Thunderstorm, Precipitation. 19. Rcc, Ship And Coast Stating Assignment; 20. Log Module With Possibility To Print Out And Create Archives; 21. Window For Listening/monitoring Of The Radiotelephone Traffic Including Possibilities To Interfere With Radiotelephone Traffic; 22. Ability To Introduce Background Noise From A List And Instrument Faults To The Trainee Stations. 23. Ability To Change Names, Call Signs, Mmsi, Telex Numbers And Inmarsat Mobile Numbers Of All Emulated Ship Stations And Coast Station According To The Needs Of Different Exercises; 24. Electronic Chart With Vessel Position Indication And The Ability To Change Position, Course And Speed; 25. Ability To Display And Instantly Change Trainee Station Positions On The Electronic Map For Search And Rescue (sar) Exercises; 26. Full Monitoring Of Any Trainee Workstation – The Ability To Monitor The Status Of Each Gmdss Unit And Listen To The Radio Traffic Of Each Trainee Station; 27. Connection To An External Printer; 28. Connection To An Active Speaker For Simultaneous Viewing Of Channels; 29. Providing Functions Of A Coast Telex Or Telephone Subscriber, Coast Radio Station And Rcc Operator From The Log Window; 30. Status Window For All Instruments At Any Workstation; 31. Ability To Log Communication And Trainee Actions For Playback And Later Review; 32. Database Of Coastal Stations, Navtex And Msi Stations And Inmarsat Shore-based Stations Plotted On The Chart; 33. Information About The Gmdss Sea Areas On The Chart; 34. Approximate Estimation Of Radio Wave Propagation In The Selected Frequency Range; 35. Evaluation And Assessment Module; 36. Navtex Functionality: · Ability To Send Navtex Messages On Behalf Of A Navtex Station; · Ability To Edit And Use The Navtex Station Used-defined List; · Ability To Save And Use Navtex Message Templates. 37. “intercom” Panel. To Monitor Intercom Communication, Execute Voice Messages From The Instructor's Side. 38. Vhf Radio Station Module. To Monitor Vhf Communication, Send Voice Messages From The Instructor’s Side, Play Pre-recorded *.wav Files. 39. Coastal Radio Station Module. Screen Layout: 40. Use Of The Mouse Wheel For Chart Centering And Scaling; 41. On-screen Display Of Mooring Walls And Piers; 42. On-screen Display Of Actual Contours Of Any Ship; 43. On-screen Display Of The Object’s Route Line And Its Actual Track; 44. On-screen Display Of The True And Relative Speed Vectors; 45. Selectable Display Mode: True Motion, Relative Motion, Course Up Or North Up; 46. Display Of Prompt And Other Information In The Status Bar: · Bearing And Distance From The Current Cursor On-chart Position To The Reference Point; · Coordinates Of The Current Cursor On-chart Position; · Depth In The Current Cursor Position; · Current Exercise Time (absolute And Relative). 47. Displaying Of Object Tracks: Contour Or Point With Selectable Resolution, Track History And Time Stamp; 48. Displaying Of Walls And Piers; 49. Use Of A Mouse Wheel For Chart Centering And Scaling; 50. User Configurable Workplace; 51. Different Panels For The Control And Monitoring Of The Exercise Fulfillment: · Reports Panel – To Form And Print Exercise Fulfillment Reports; · Ship Info Panel – To Display Courses, Longitudinal And Transverse Speeds, Rates Of Turn For All The Ships Involved In The Exercise. · Evaluation And Assessment Module Panel; · Target Panel – To Control Vessel Target And Flight And Sar Objects; · Objects Panel – To Promptly Select An Object On The Chart From The List Of All The Objects Available In The Exercise; · Flags Panel – To Hoist/lower Ics Flag Signals On Any Of The Ships, Including Ability To Set And Keep Flag Templates · Events Panel – For The Automatic Recording Of Any Important Events Related To The Incorrect Trainee Actions; · Flash Light Panel – To Send Light Signals From Target Vessels, Including Automated Translation Into Morse Code; · Magnetic Deviation Panel – To Configure The Magnetic Deviation Panel For The Vessels, Participating In The Exercise, Save The Panel And Apply Desired Template To Any Own Vessel, Print The Magnetic Deviation Table; · Procedural Alarms Panel – For Defining User Set Of Alarm For Dedicated Vessels. 52. Setting Navigational Equipment Parameters And Faults: Radar, Gps, Loran C, Log, Gyro, Echo Sounder, Uais; 53. Setting The Exercise Weather And Bathymetric Conditions: Global And Local Zones, Import Of Tide And Current Databases; 54. Observing Own Ships And Targets On The Chart: Ship Info Panel, Cpatcpa Panel, Events Panel; 55. Control Of Own Ships And Targets On The Chart: Direct Control Of Steering And Propulsion Systems, Autopilot, Mooring Lines, Anchors; 56. Setting Faults Of Navigational Equipment, Steering And Propulsion System, Fire And General Alarms; 57. Continuous Data Logging During Exercises; 58. Playback Of Recorded Exercises In Real And Fast-time Modes; 59. Performing Preliminary Exercises On The Map To Check Their Suitability For Training On The Simulator; 60. Distress Signals (flare, Smoke Signals, Dye Markers); 61. Adding New Target Ships; 62. Changing Weather Conditions; 63. Moving Buoys, Turning Off Lights On Them And Hiding Them On Both The Visualization System And Radar; 64. Control Of Automatic Tugboats On Commands From The Bridge Or From The Instructor; 65. Generating And Printing Exercise Reports 5.4 Simulator Scenario Development Station 1. The Simulator Scenario Development Station Shall Be Integrated With All Engine Stations And Instructor Stations, And Can Act As An Instructor Station Capable Of Deploying Scenarios To Other Stations (bridge And Engine) 2. The Simulator Scenario Development Station Shall Have The Same Software And Control Capabilities As The Instructor Station. (see Section A 5.5.3) B. Full Mission Engine Room Simulator (fmers) And Mini Er Stations’ Features And Applications, Major Components And Engine Room Simulator Performance Standards 1. Major Components The Full Mission Engine Simulators That Can Be Integrated With Bridge Simulators Shall Consist Of The Following Major Components: A. One (1) Full Mission Engine Room Station (class A Configuration) B. Ten (10) Mini Engine Room Stations (class B Configuration) C. One (1) Server Station D. One (1) Instructor Station E. One (1) Simulator Scenario Development Station F. One (1) Briefing/ Debriefing Station 2. Features And Applications 2.1 The Man Electronic Engine Model Simulates A Suez Max Crude Oil Carrier With A Man Slow Speed Turbo Charged Diesel Engine As Propulsion Unit Modeled With Fixed Propeller. The Main Engine Models Respond Dynamically To Variations In Operation And Conditions Of The Ship Model, And The Ship Models Have Mutual Responses To The Main Engine Models. The Model Is Based On Real Engine Data That Makes The Dynamic Behavior Of The Simulator Close To Real Engine Response. In Addition To The Man Engine, The Vessel Has An Electrical Power Plant Including Three 1125 Kva Diesel Generators And One 250 Kva Emergency Generator. The Steam Plant Includes Two D-type Steam Boilers, Based On Alfa Laval And One Composite Boiler (aalborg), 3 Cargo Turbines, Condensing And Feed Water Systems. Control Room Operator Station, Bridge And Steering Panels Are Included. The System Shall Also Be Connected To The High Voltage Engine Simulator. 2.2 The Simulator Models Complies With The Requirements In The Stcw Convention, Regulation 1/12 And Fulfill The Standards Of An Internationally Recognized Classification Society For Maritime Simulator Systems. 2.3 The Engine Model Main Specifications High Fidelity Engine Room Systems Include: - Sea & Lt/ht Fresh Water Systems, Incl. Fw Generator - Electrical Power Plant, Incl. Diesel Generators And Power Management - Start & Service Air Compressors, Incl. Compressor Intermediate Coolers And Emergency Compressor - Integrated Automation System, Incl. Vessel Performance Monitor - Steam Plant Incl. D-type Oil Fired Boilers And Combined Exhaust/oil Fired Boiler - Diesel/heavy Fuel/oil Systems, Incl. Hfo, Lshfo And Mdo Tanks, Separators, Viscometers - Lubricating Oil Systems, Incl. Separator - Stern Tube Systems - Steering Gear - Main Engine Control System (man) - Main Engine Remote Control System (ac 600) - Main Engine Maneuvering System - Main Engine Hydraulic Oil System - Main Engine Hydraulic Cylinder Units System - Cylinder Indication Diagrams - Air Ventilation System - Bilge Wells & Bilge Separator - Sewage Treatment Plant - Incinerator Plant - Inert Gas System - Ballast System - Refrigeration System - Ship Loading System - Fire Detection System - Fire Fighting System - Remote Co2 Release, Emergency Stops And Quick Release Valves - Emission Control System (water Scrubbing And Me Low Nox Mode) 2.4 The Engine Simulator Product Shall Be Able To Address The Following Stcw Competencies And Shall Be Reflected In The Certificate: · Table A-iii/1.1 – Maintain Safe Engineering Watch · Table A-iii/1.3 – Used Of Internal Communication Systems · Table A-iii/1.4 – Operate Main And Auxiliary Machinery And Associated Controls · Table A-iii/1.5 – Operate Fuel, Lubrication, Ballast And Other Pumping Systems And Associated Control Systems · Table A-iii/1.6 – Operate Electrical, Electronic And Control Systems · Table A-iii/1.7 – Maintenance And Repair Of Electrical And Electronic Equipment · Table A-iii/1.11 – Maintain Seaworthiness Of The Ship 2.5 Interface To Engine Room High Voltage System - The Engine Room Model Will Be Interfaced To A Corresponding High Voltage Simulator And Gas Turbine Installed In The Academy. 3. Engine Room Simulator Performance Standards 3.1 Physical Realism The Engine Simulator Stations Shall Have The Following Physical Realism: A. Equipment And Consoles Shall Be Installed, Mounted, And Arranged In A Ship-like Manner B. The Control Room Consoles Shall Include Control And Monitoring Of The Main Engine, Auxiliary Engines And Electrical Power Generation, Steam Boiler, Pump, Compressors And All Other Alarms. C. The Remote Monitoring And Control Systems Shall Be In Compliance With The Functional Requirements Of The Classification Societies For Periodically Unattended Machinery Spaces. D. The Main Engine Remote Control Console Shall Include Command Functions And Status Indication Normally Found On Board Ships. E. The Electric Power Generation Shall Be Under Automatic Or Manual Control. Such System Should Be Able To Constantly Monitor Demand And Supply. When Deviation From Pre-set Limits Arises, The System Should Be Able To Act In Order To Normalize The Situation. The System Shall Also Perform Continuous Control Of The Frequency And Load Sharing. F. The Electric Power Supply System Shall Be Operated Either From The Switchboard Or The Power Management System. - Remote Start/stop Of Auxiliary Diesel Generators - Operation For Shaft Generator - Connect/ Disconnect Of All Generators - Automatic And Priority Selection - Non-essential Systems Trip - Constant Frequency Mode - Different Control Modes Of Load Sharing G. The Main Switchboard Shall Be A Full Scale Model Of A Typical Switchboard, And Comprise The Necessary Controls And Indicators Usually Available Of Real Generators. H. The Remote Control And Automation System Must Include Control Of The Following Equipment: - Me Lubricating Oil Pumps - Me Fresh Water Cooling Pumps - Me Sea Water Cooling Pumps - Me Auxiliary Blowers - Fuel Oil System And Pumps - Air Compressors - Steering Gear Pumps - Fire Pump Each Of The Above Individual Units Shall Allow Manual Start And Stop From The Control Room Consoles. It Shall Also Be Possible To Use Automatic Start And Stop Where Applicable. I. The Alarm Monitoring System Shall Consist Of A Typical Shipboard Alarm System. J. An Alarm Shall Be Announced By Sound And By Flashing Light In The Control Room. K. A Printer Or A Computer In The Engine Room Control Shall Be Used As An Alarm Log And Event Log. L. “dead Man Alarm System” The Simulator Shall Have The Following Additional Requirements For Low Speed Engine: M. The Simulated Engine Room Shall As A Minimum Reflect Typical Machinery Found On Merchant Ships. The Following Main Components Shall Be Simulated And All Necessary Sub-systems Included For A Low Speed Engine: - Main Engine Including Turbocharger System - 2 Auxiliary Diesel Generators - Lubrication Oil Separator - Steering Gear System - Fire Pump - Shaft Generator - Cooling Water System Including Freshwater Generation System - Turbo Generator - Fuel Oil Bunkering System - Fuel Oil Settling And Service Systems - 2 Heavy Fuel Oil Separators - 1 Diesel Oil Separator - Steam Generation Plant Including Exhaust And Oil-fired Boilers - Diesel Oil And Heavy Fuel Oil Supply To Main And Auxiliary Engines - Main Engine Operation From Engine Room, Engine Control Room And Bridge - Turbocharger System - Air Ventilation System For Engine And Control Room - Bilge Water System Including Oily Water Treatment Systems - Stern Tube System - Deck Machinery Applicable To The Ship Model - Ballast System - Sewage Treatment System The Simulator Shall Have The Following Additional Requirements For Medium And High Speed Engine: N. The Simulated Engine Room Shall Consist Of Typical Machinery Found On Merchant Ships. The Following Main Components Shall Be Simulated And All Necessary Sub-systems Included For A Medium And High Speed Engine: - One Or More Main Engines - Main Sw System - 2 Auxiliary Engines - Fuel Oil Tanks - Fuel Oil Separator - Lubrication Oil Separator - Main Engine(s), Including: • Fresh Water System • Lubrication System • Turbocharger System • Me Sw System - Reduction Gear System - Controllable Propeller Pitch Were Applicable - Steam Generation System As Applicable - Freshwater Generator - Bilge Wells And Bilge Separation System - 2 Air Compressors - Steering Gear System - Fire Pump - Electrical Power Plant - Deck Machinery Applicable To The Ship Model - Ballast System - Sewage Treatment System The Simulator Shall At Least Have The Following Additional Requirements For Machinery Spaces: O. The Simulated Machinery Spaces Shall At Least Include One Dedicated Room For This Purpose. P. At Least The Following Main Components Of The Machinery Spaces Shall Be Graphically Presented Or Represented By Mock-ups Or In Realistic Visualization (to Illustrate Physical Presence) In The Simulated Machinery Spaces: - Main Engine - Auxiliary Diesel Generators - Steam Boiler - Fire Pump Q. The Facilities For Local Operation In The Simulated Machinery Spaces Shall Consist Of Local Operating Stations For Each System. Each Station Shall Be Furnished With Start/stop (open/closed) Buttons And Status Lights, Various Numbers Of Pressure -, Temperature Indicators, Etc. The Local Operating Stations Shall At Least Give Means To Operate The Following: - Main Engine (me) - Me Lubricating Oil Systems Including Separator - Me Fresh Water Cooling System - Me Sea Water Cooling System - Me Auxiliary Blowers - 2 Auxiliary Diesel Generators - Steam Boiler - Fuel Oil System (diesel And Heavy Fuel Oil) Including Separator - 2 Air Compressors - Steering Gear System - Bilge Water System - Fire Pump R. All Valves Typically Associated With The Operation Of Above Machinery May Be Operated At The Computer Screen In A 3d Visual Form Or Mouse Operated By The Candidate. S. Internal Communication System. 3.2 Behavioral Realism The Engine Simulator Stations Shall Have The Following Behavioral Realism: A. The Simulator Models Shall Be Able To Replicate The Dynamic Behaviour Of The Machinery Systems And All Its Visual Parameters As Well As The Interactions Between The Sub-systems. B. The Simulator Models Shall Simulate The Engine Room Components With Their Procedures, As Well As Modelled Controller Systems (sensors, Controllers, Actuators, And Valves) Connected To The Processes. C. When Simulating Real Equipment The Behaviour Of Such Simulated Equipment Should Behave As Identical Aw Possible As The Original. Critical Parameters Of The Behaviour Shall Be Documented D. The Simulator Model Shall Make Applicable Controllers Available And Adjustable With Regards To Pid (proportional-integral-derivative Controller) Parameters. E. The Simulator Model Shall Provide Facilities To Allow The Injection And Resetting Of Malfunctions At Appropriate Times During Operation As Necessary. F. It Shall Be Possible To Simulate Change In Seawater Temperature And Demonstrate How This Affects The Complete Simulation Model. G. It Shall Be Possible To Simulate A Change In Air Temperature And Demonstrate How This Affects The Complete Simulation Model. H. The Simulator Shall Have All Heat Exchangers Available And Adjustable With Regards To Their Parameters (heat-transfer Factor, Heat Dissipation Are Etc.) I. The Simulator Shall Make All Pumps Available And Adjustable With Regards To Their Parameters (pump Capacity, Wear, Etc.) J. It Shall Be Possible To Demonstrate Systematically The Tests That Are Made On The Ums (unmanned Machinery Space) Alarm System. K. It Shall Be Possible To Simulate Auto Slow-down And Emergency Shut Down L. It Shall Be Possible To Simulate Safe Methods To Test Inert Gas Generator (ig) Alarms And Control. M. It Shall Be Possible To Simulate Testing Of The 24v D.c. Power Supply To The Navigation, Communication And Engine Room Control Console In Event Of Power Failure. N. It Shall Be Possible To Simulate Safe Method Of Testing The Insulation For Rotor And Stator. O. It Shall Be Possible To Simulate Of Reading A Power Factor Meter With Reference To Four Segments P. It Shall Be Possible To Simulate Testing Of The Devices And Relays Provided For Generator Protection Q. It Shall Be Possible To Simulate Tests Related To Avr (automatic Voltage Regulator) R. It Shall Be Possible To Simulate Methods Of Cooling And Checking Of Air Gap S. It Shall Be Possible To Simulate The Precautionary Measures When Megger Testing The Rotor Of A Brushless Generator T. It Shall Be Possible To Simulate Routine Tests On An Emergency Generator U. It Shall Be Possible To Simulate How A Generator Circuit Breaker Ocr (over Current Relay) Is Set And Tested. V. It Shall Be Possible To Simulate The Process Of Connecting A Shaft Generator On Load And Specific Conditions For Taking Off Load. W. It Shall Be Possible To Simulate The Procedure For Megger Testing A High Voltage System X. It Shall Be Possible To Simulate The Maintenance And Checks Carried Out On An Acb (air Circuit Breaker) Y. It Shall Be Possible To Simulate Recovery From “dead Ship” Condition. Z. It Shall Be Possible To Simulate Methods Test The “preferential Tripping Sequence” Aa. It Shall Be Possible To Simulate Methods To Tests Auto “cut In” Of Stand Fault Bb. It Shall Be Possible To Simulate Methods Of Diagnosing Single Phasing Fault. Cc. It Shall Be Possible To Simulate Operation And Maintenance Of Variable Speed Motor Starters. Dd. It Shall Be Possible To Simulate Operational Test Methods Of Oily Water Separator Monitors Ee. It Shall Be Possible To Simulate Test Methods For Level Alarms And Function Tests Of Bilge Pumping Arrangement Ff. It Shall Be Possible To Simulate The Functional Tests Of Odmcs (oil Discharge Monitoring And Control System) And Odme (oil Discharge Monitoring Equipment) System Gg. It Shall Be Possible To Simulate The Function Test Of Ows (oily Water Separator) And Ppm (parts Per Million) Unit. 3.3 Operating Environment The Engine Simulator Stations Shall Have The Following Operating Environment: A. It Shall Be To Adjust The Noise Level In The Simulated Machinery Spaces Infinite From No Added Noise Up To Minimum 100 Db(a). The Noise Shall Have A Frequency Distribution Typical For Machinery Spaces. Headset Is Provided For Each Workstation. B. It Shall Be Possible To Simulate The Sea Water Temperature At Least Infinite Between +1ºc And +30 ºc C. An Alarm Can Be Heard Through Headset Of A Candidate And By Flashing Light In The Machinery Spaces 4. Hardware Requirements 1 Set 4.1 Full Mission Engine Room Simulator A. Engine Control Room Consoles I. Ecr Pump Compressor And Power Management Console 1. 1 X Console 2. 1 X Computer 3. 2 X 24 Touch Monitors Ii. Ecr2 Alarm, Monitoring And Remote-control Console: 1. 1 X Console 2. 1 X Computer 3. 1 X Keyboard 4. 1 X 24” Touch Monitor 5. 1 X Industrial Tracker Ball Iii. Ecr3 Main Engine Remote Control And Indication Console 1. 2 X Console 2. 1 X Computer 3. 3 X 24” Touch Monitors 4. 1 X Speed Set Lever For Main Engine Remote Control And 5. Indication Console 6. Dead Man Alarm (dma) 7. Engineers Reset 8. Included Power Relay To Which Illumination In Engine Control Room And Engine Room Can Be Connected, Causing Lights In The Rooms To Go Out During A Blackout To Increase Realism. Iv. Simulated Cctv Touch Monitor 1. 1 X Computer 2. 1 X 24 Monitor V. Internal Telephone At The Following Locations 1. Instructors Station 2. Engine Control Room 3. Engine Room 4. Emergency Generator Room Vi. Main Switchboard 1. 14 X Touch Screen Monitors 2. 7 X Computers 3. 1 Set Of Speakers 4. Installed In A Switchboard Manner Vii. Engine Room Equipment 1. 4 Dome Type Virtual Walkthrough 2. 4 X High Resolution Short Throw Projector 3. 4 X Computer With Graphics Card 4. 4 X Controller Viii. Local Operating Station Console 1. 1 X Console 2. 1 X Computer 3. 1 X Keyboard 4. 1 X 24” Touch Monitor 5. 1 X Industrial Tracker Ball Ix. Engine Room Sound 1. 1 X Sub Woofer 2. 4 X Satellite Speaker X. Alarm Horn And Lamp 1. 1 X Column With Lights And Sirens Xi. Emergency Generator Room 1. 1 X Dome Type Virtual Walkthrough 2. 1 X High Resolution Short Throw Projector 3. 1 X Computer With Graphics Card 4. 1 X Controller 5. With Sound System B. All Computers Must Be The Latest Generation This Includes Processors, Memory, Graphics Card And Storage. I. Monitors: Full Hd Resolution Ii. Storage: Solid-state Drive (ssd) Iii. Processor Generation: Must Be From The Latest Generation Of Processors Iv. Graphics: Integrated Graphics Dedicated Gpu If Needed. C. Touchscreens For Durability, Responsiveness, And Multi-touch Support. D. Each Computer Must Be Paired With A Ups Unit Rated For At Least 1.5 Kva And Automatic Voltage Regulation To Handle Voltage Fluctuations. E. The Engine Control Console Must Be Made From Steel W/ Handrails 10 Sets 4.2 Mini Engine Room Simulator A. 1x Computer Specification (minimum Requirement) 1. Intel Core I5 Processor 2. 16 Gb Ram 3. 256 M.2. Ssd 4. Video Card 5. Keyboard/mouse 6. 2x At Least 24" Monitor (touchscreen) 7. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator B. 1x Table Size: At Least L 1200 X W 800 X H 750 Mm C. 1x Chairs 1 Set 4.3 Engine Instructor Station A. Instructor Station I. 1x Computer (minimum Requirements) 1. 3x 24” Monitor 2. Intel Core I5 Processor 3. 16 Gb Ram 4. 256 M.2 Ssd 5. Keyboard/mouse 6. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator Ii. 1x Speaker 1. Type: Desktop 2. Port: Mini Jack Iii. 1x Steel Cabinet W/ Lock 1. Metal Drawer Office Drawer 2. File Cabinet Storage With Wheel Iv. 1x Smart Tv 55” Tv Led For Cctv V. 1x Printer 1. Laser Printer A4 2. A4 Print Speed Up To 48 Ppm 3. Auto 2-sided (duplex) Printing, 1-line Lcd 4. Wifi, Airprint, Mopria, Wifi Direct, Lan, Usb 2.0 5. Colored Printer Vi. Instructor Station Table Specification: Vii. 11x Two-way Vhf Radiotelephone (walkie-talkie) With Charging Connection Viii. 1x Table Size: At Least L 1700 X W 700 X H 750 Mm 1. Material: Formica Matt Laminate On Chipboard Ix. 1x Ergodynamic Chair X. 1x Document Metal Cabinet With Glass Sliding Door 1. Size: 1850x 400mmx 900mm 2. Door Lock 1 Set 4.4 Engine Simulator Scenario Development Station A. Scenario Development Station As An Instructor Station Capable Of Deploying Scenarios To Other Stations (bridge And Engine) 1. 1x Computer (minimum Requirements) 2. 2x 24” Monitor 3. Intel Core I5 Processor 4. 16 Gb Ram 5. 256 M.2 Ssd 6. Rtx 4070 Or Higher 7. Keyboard/mouse 8. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator B. 1x Table Size: At Least L 1200 X W 800 X H 750 Mm I. Material: Formica Matt Laminate On Chipboard Ii. 1x Ergodynamic Chair 5. Software Requirements 5.1 Full Mission Engine Room Simulator 5.2 Mini Engine Room Simulator 5.3 Instructor Station 5.4 Simulator Scenario Development Station 1. The Simulator Scenario Development Station Shall Be Integrated With All Engine Stations And Instructor Stations, And Can Act As An Instructor Station Capable Of Deploying Scenarios To Other Stations (bridge And Engine) 2. The Simulator Scenario Development Station Shall Have The Same Software And Control Capabilities As The Instructor Station. (see Section B 5.5.3) 1 Set C. Briefing/ Debriefing Station For Bridge And Engine A. 2x Computer (minimum Requirements) 1. 1 X Pc 2. Intel Core I5 Processor 3. 16 Gb Ram 4. 500gb Ssd 5. Low Profile Video Card 6. 1x Keyboard/mouse 7. 1x Ups 1kva 8. 1x W/ Computer Table Size: At Least L 1700 X W 700 X H 750 Mm 9. Briefing And Debriefing Rooms With Playback Capability (playing Of Recorded Exercise And Assessment In Simulator B. 50x Chairs C. 1x Solid Round Table (at Least 6100 X 1220 Mm) (for Bridge Briefing/debriefing) I. (metal Legs With Laminate Board Or Solid Wood Table) D. 1x Solid Round Table (at Least 4880 X 1220 Mm) (for Engine Briefing/debriefing) I. (metal Legs With Laminate Board Or Solid Wood Table) E. 1x Smart Tv At Least 70" 4k 1. Wall Mounted. 2. 2x Hdmi 10meters F. 4x Bridge And 4x Engine) Hardware For Virtual Bridge Familiarization (minimum Requirements) 1. Display: A. Type: Lcd B. Resolution: 2064 X 2208 Per Eye C. Refresh Rate: 120 Hz D. Field Of View: E. Horizontal: 97 Degrees F. Vertical: 93 Degrees 2. Processor: A. Chipset: Qualcomm Snapdragon Xr2 Gen 2 3. Ram: 12gb 4. Storage: A. Options: 128gb, 256gb, And 512gb Variants 5. Audio: 6. Hand Tracking: Improved Hand Tracking Capability 7. Controllers: A. Type: Meta Touch Pro Controllers B. Features: Haptic Feedback, Improved Ergonomics, Rechargeable Batteries 8. Battery: A. Headset: Approximately 2-3 Hours Of Active Use B. Charging: Usb-c Fast Charging 9. Connectivity: A. Wireless: Wi-fi 6e Support B. Bluetooth: 5.2 10. Inclusions: A. Headset B. Touch Pro Controllers (pair) C. Charging Cable (usb-c) D. Power Adapter W/ Extra 1 Battery Each E. Controller Lanyards F. Glasses Spacer Ii. Add On’s: 1. 2x Strap With Battery 2. 8x Silicone Cover Face Cover 3. 4x Silicone Protective Case 4. 8x Silicone Case For Controller 5. 3 Row Vr Storage Cabinet With Lock G. The Virtual Reality Bridge Must Be Complete With Hotspots, Identification Tags And Descriptions. It Shall Also Be Available On An Offline System, Navigable. H. Playback Capability With The Following Functions: · Loading A Previously Created Exercise On A Chart Or In Engine Room; · Playing The Exercise To Explain The Task; · Uploading A Sample Log Of The Same Exercise To Explain The Correct Actions. I. Virtual Bridge Familiarization W/ Virtual Reality Device The Vr System Aims To Simulate The Overhauling Process, Enabling Immersive, Hands-on Learning And Pre-assessment Without Direct Physical Intervention On The Engine. This Approach Will Enhance Technical Skills, Reduce Risk, And Improve Efficiency In Real-world Engine Maintenance And Overhauling. The Supplier Shall Provide A Virtual Bridge And Engine With The Use Of Virtual Reality Providing The Following Visualizations: 1. Bridge Wing Equipment 2. Speaker Mic 3. Rate Of Turn 4. Engine Rpm 5. Quick Release Lifebouy 6. Remote Panel 7. Gyro Compass Repeater 8. Fire Box 9. Hatch For Maintenance 10. Thermometer Ii. Main Bridge 1. Epirb 2. Sart 3. Clear View Screen 4. Location Of Fire Extinguishers 5. Pantry With Equipment 6. Pilot Chair 7. Smoke Detectors 8. Damage Control Plans 9. Radar 1 And 2 And 3 10. Gps With Other Equipment 11. Helm Wheel 12. Indicator Control 13. Deck Light Control 14. Admiralty And Other Maritime Publications 15. Fireplan 16. Rudder Angle Indicator 17. Voice Recorder 18. Whistle Horn 19. Water Tight Door Indicators 20. Window Wipers 21. Pa Systems 22. Cargo Hold Fan Control 23. Smoke Alarm System 24. Fire Alarm System 25. General Alarm System 26. Vhf System 27. Log Books And Other Documentation 28. Ecdis Voyage Planner 29. Pressure Recorder 30. Portable Uhfs 31. Lifejackets, Rocket Flare, And Rocket Line 32. Location Of Immersion Suits 33. Barometer 34. Utc Clock 35. Radio Room Configuration 36. Posters 37. Charts 38. Compass Deck / Monkey Island 39. Radar Equipment 40. Antennas 41. Anemometer 42. And Other Equipment On The Monkey Bridge Iii. The Me-b Main Engine Vr Overhauling System Cover The Following Features Full-scale, Interactive Models Allowing For A Detailed Exploration Of All Engine Components, Including: Iv. Connection Rod & Crosshead Assembly V. Stuffing Box Assembly Vi. Piston Assembly Vii. Cylinder Liner Assembly Viii. Cylinder Cover Assembly Ix. Exhaust Valve Assembly X. The Vr Simulation Guides Users Through Disassembling, Inspecting, And Reassembling The Exhaust Valve, Focusing On Critical Tasks Like Checking Valve Seats, Spindle Condition, And Wear On Sealing Surfaces. Users Can Also Simulate Tasks Such As Lapping The Valve, Inspecting Hydraulic Actuators, And Ensuring Proper Seating Of The Valve During Reassembly. 1 Set D. Server Station For Bridge And Engine A. 2x Set Computer (minimum Requirements) 1. Intel Core I5 Processor 2. 16 Gb Ram 3. 4x 500 Ssd 4. Keyboard/mouse 5. License Operating System B. 1x Nas And Exercise Server 1. 4 Bay Nas Disk Station Quadcore Processor 2. 4x 4 Tb Hdd C. 1x Server Rack 1. Server Rack At Least 32u 2. W/ Fan D. 1x Ups 1. 5kva (5kw) 2. Sealed Lead-acid (sla) Or Lithium-ion 3. Output Voltage: 230v Ac 4. Surge Protection 5. Stabilizes Incoming Voltage Without Switching To Battery Mode 25 Sets E. Cloud Simulator-ready Computers A. Laptop 1. 13th Gen Intel Core I5-1335u 2. 16 Gb, 2 X 8 Gb, Ddr4. 2666 Mhz 3. 512 Gb, M2, Pcie Nvme, Ssd 4. Intel Iris Xe Graphics 5. Windows 11 Pro License 6. Wi-fi 6 Wireless Lan And Bluetooth 7. Keyboard With Numeric Keypad 8. 15.6", Fhd 1920x1080, 120hz, Wva, Non-touch, Anti-glare, 250 Nit, Narrow Border, Led-backlit 9. Ports: Usb 2.0, Headset Jack, Power Jack,hdmi 1.4, Usb 3.2 Gen 1 Type-a, Usb 3.2 Gen 1 Type-c™ 10. Power Adapter: 220v Ac Input, 65w 11. Accessories: Wireless Mouse 1 Set F. Network And Cctv A. 1 X High Speed Router For Remote Support B. Network Switch 1. Network Switch Specifications Manage: 2. 4x 24 Ports 10/100/1000mbps Rj45 Ports 3. 1x 8 Ports 10/100/1000mbps Rj45 Ports C. Set Cctv Monitoring 1. 1x Nvr At Least 32 Channel 2. 20x 6 Mp Fixed Dome Network Camera With Mic 3. 3x 6tb Storage (design For Cctv) D. Network Requirements: I. 72x Lan Port Ii. 1x Lot: Of Upvc, Conduit, Pull Box, Fittings, Hanger, And Support And Other Materials If Needed. Including Utp Cat6 Shielded Pure Copper, Fiber Optic Cable, Patch Panels. Iii. Installation, Engineering Labor For Entire Project. Iv. Cable Laying, Labeling, Harnessing V. Mobilization And Di-mobilization Vi. All Cabling Will Be Endpoint At Server Room (back Of Full Mission Bridge Simulator) E. Structured Cabling Systems Standard I. Stations Must Include Lan Outlets And Patch Cords. Ii. Backbone Cabling Will Be Using The Cable Tray For Lan Distribution. Iii. Lan Outlets Must Have Network Labeling Iv. Patch Panels Are Required G. Civil Works A. Program Of Work Separate Documents (attached) Part Ii. Other General Requirements 1 Ea. Project Billboard/signboard 1 L.s Occupational Safety And Health Program 1 L.s Mobilization/demobilization Part Iii. Civil, Mechanical, Electrical, & Sanitary/plumbing Works Part A. Earthworks 1 L.s Removal Of Structures And Obstruction Part C. Finishings And Other Civil Works 179.71 M² Wall, Metal Frame, Fiber Cement Board 6mm 37.92 M² Tempered Glass Door, 12mm, Reflective 23.04 M² Aluminum Glass Window 4.05 M² Doors, Solid Panel 406.28 M² Acoustical Ceiling Panel 745.2 M² Painting Works, Masonry/concrete 4.05 M² Painting Works, Wood 48.38 M² 150mm Chb Nonload Bearing(including Reinforcing Steel) 48.38 M² Plain Cement Plaster Finish 116 M² Floor Tiles, Imo Rubber, On Finish Floor 211.6 M² Floor Tiles, Imo Rubber, On Raised Floor System Part D. Electrical 1 L.s Panelboard With Main And Branch Breakers 1 L.s Wires And Wiring Devices 1 L.s Lighting Fixtures And Lamps 1 L.s Conduit, Boxes, And Fittings 1 L.s Pole Mounted Power Transformer (oisc) 1 L.s Network Cabling Part E. Mechanical 1 L.s. Door Access And Card Reader System Part F. Simulator Equipment 1 L.s Airconditioning, Package/split Type H. Terms And Conditions 1. A 3-year Warranty For The Computer Hardware And Console Peripherals 2. All Workstations Shall Have Imo Standard Rubber Mat Flooring. 3. The Software Comes With A 3-year Warranty Inclusive Of New Updates. 4. The Project Will Be Implemented Within 150 Cd. Liquidating Damages Will Be Applicable For Any Delays. 5. A Comprehensive Guide Will Be Provided, Offering Detailed Instructions On System Operation And Maintenance Activities, Facilitating Ease Of Use And System Upkeep. 6. Onsite Training Sessions Will Be Conducted By Certified Instructors And Technical Experts, Facilitating Smooth Knowledge Transfer And Ensuring Proficient System Operation. Certificates Will Be Provided Upon Completion Of Training Sessions. 7. Structured Cabling Standards To Establish A Reliable And Efficient Network Infrastructure. 8. The Simulator Manufacturer Should Be An Iso 9001:2015 And Iso 14001:2015 Certified Business. 9. The Simulator Should Be Certified By An Internationally Recognized Classification Society And May Also Be Certified By National Authorities. 10. The Software Must Be Perpetual License. 11. The Supplier Shall Conduct An Annual Face-to-face Maintenance Session To Ensure The System's Optimal Functionality And Performance. 12. The Supplier Must Resolve Any Software Or Hardware Issues Within 2 To 5 Cd Of Their Occurrence To Minimize Downtime And Disruptions. 13. All Hardware Installations Must Adhere To Software Specifications To Guarantee Seamless Integration And Operation. 14. The Computer Hardware Supplied Must Be Sourced From Proven Technology Hardware Companies, Quality And Performance Standards To Ensure Optimal Functionality And Compatibility With The Software. 15. Bidders Are Required To Offer Continuous Retraining Sessions Free Of Charge During The Warranty Period To Ensure Users' Proficiency With The System. 16. Bidders Should Provide Manufacturer Authorization Or Exclusivity Certificate To Ensure The Authenticity And Legality Of The Supplied Products. 17. The Bidder Is Responsible For Performing A Thorough Site Inspection, And A Site Inspection Certificate Issued By The Agency Shall Be Submitted As Part Of The Eligibility Requirements. 18. The Bridge Simulator Shall Be Integrated With The Engine Simulator Ensuring Compatibility And Functionality. 19. All Simulator Stations Can Connect And Enable Them To Interact With Each Other In A Coordinated Scenario. 20. The Simulator Scenario Development Station Shall Be Capable Same As An Instructor Station Capable Of Deploying Scenarios To Other Stations. 21. All Other Simulator Specifications And Capabilities Not Indicated Herein, The Simulator Shall Comply With The Simulator Performance Standards As Required In Maritime Industry Authority (marina) Evaluation Instrument For Full Mission Bridge And Engine Simulator. 22. The Bidders Should Provide A Breakdown Of The Unit Prices Of The Major Components In The Original Of Duly Signed And Accomplished Price Schedule(s) Under Financial Component Envelope Upon Bid Submission. Furthermore, They Should Provide A More Detailed Breakdown As A Condition For Issuance Of Notice To Proceed. ~~~~nothing Follows~~~~