Camera Tenders

Details: Description 1. Tablet + 5g With S-pen* Display 12.4 Wuxga*244 Ppi*90hz Refresh Rate*12mp Front Camera*8mp+8mp Rear Camera*5g,lte,wi-fi*sim Card Slot*exynos 1380*8gb Ram + 128 Rom *10090mah Battery With Free Keyboard - 86 Units

Description: Scrap Indutrial Grit Blast , Items Contained In Scrap Industrial Grit Blast Products Arising In Machanical Workshop Gorakhpur Consisting Of Following Items ¿ Scrap Indutrial Grit Blast Released From Coach Trolly Clining By Compressor Machine Which May Be Mixed With Or Without Small Pices Coach Scrap Like Nut, Bolt, Rubber, Plastic , Sunmica, Wood, Raxine, Filter, Recron , Hanger , Hp Bp Pipe, Turning Boring, Chips, Gi Pipe , Universal Coupling Etc . Less Than Five Feet Ferrous Non Ferrous And Rail Will Be Delivered If Found Available Excluded Items Cst-9 ,complete Bogie Frames,wheel Frames, Wheel Sets/dises,axles And Metal Pieces Larger Than 5 Feet Lenth. These Items If Found In The Auctioned Lot ,will Not Be Handed Over To The Purchaser (as Per Sag Committee Recommendation ) Condition 2: Material Delivered ¿as Is Where As Basis ¿ Condition3: Material Loading Allowed With Jcb Machine Condition4: Perfered Mode Of Delivery As Per Para 5 Of Sag Committee Repots Which Is Reiterated As Under :- Monitoring Of Procedure Of Delivery Should Be By Video Graphing The Entire Process Of Each Trucks Right Up To Its Despatch At The Workshop Gate , In Addition To Monitoring By Cc Cameras .since Despatch Will Be At Workshop Gate So It Is Very Clear In And Out Of Vehicle Will Be At Workshop Gate And Hence Gate Pass Will Be Signed By The Office Of Cwm/workshop. Custodion-sse-bogie Shop/mws/gkps Location-south East Side Of Foundary Shop Under Pipal Tree . The Approx Percentage Of The Material Which Were Found On That Digged Out Of Lot Were As Under- 1 - Gunny Bag Rexine Rubber And Other Mix Garbage -5% 2- Small Pieces Of Metal -3.09% (weight By Been Scale Of Scrap Ward/gkpd) 3- Industrial Grit Blasting -91.91% (estimation And Visual Basis) Special Remarks- 1 ¿ The Qty Of Said Industrial Lot Is On The Basis Of Visual Estimation ,hence It Is Much Possible That The Lot Qty May Be Vary (+) Of (-) 2-before The Delivery Of The Lot The Witnessing Team Will Be Assure That The Said Lot Is Under Coverage Of Cc Tv Camera. 3-delivery Of The Lot Should Be Made Only Up To That Point Whereas The Lot Is Under The Coverage Of Cc Tv Camera. If Any Objectionable Material Found At The Time Of Delivery Then The Witnessing Party Will Handover The Same To The Custodian Of The Material. 5-this Lot Has Been Set Up On The Basis Of Terms And Conditions Of Industrial Waste Which Has Been Approved By The Competent Authority. Lbpl, Delivery By Cubic Meter ,gst-5%, Tcs-1% ,hsncode-251710,allocation-20714208

Details: Notice Of Intent 24-007534 product Service Code: 6515 naics Code: 339112 - (not Small Business Size Standards- 1,250 Average Number Of Employees) place Of Performance: bethesda, Md 20892 Usa psc-code 6515 pots: 24-007534 description: this Is A Notice Of Intent, Not A Request For A Quotation. A Solicitation Document Will Not Be Issued, And Quotations Will Not Be Requested. the National Institutes Of Health, Office Of Purchasing And Contracts On Behalf Of The National Institutes Of Health (nih), Clinical Center (cc), The Department Of Perioperative Medicine Intends To Award A Firm Fixed Price Contract To Karl Storz Of El Segundo, California To Provide Preventative Maintenance Service For Integration Systems. the Purpose Of This Of Preventative Maintenance Agreement On Its Current Integration Systems. this Integration System Supports The Current Operating Rooms To The Education Room. Currently Or’s 10, 11, And 12 Have Existing Karl Storz Equipment That Is Utilized For Integration Purposes. The Current System Houses A Framework That Communicates With Future Technology And Likewise, The New Equipment Is Able To Communicate With The Existing Equipment Through The Same Framework. The Purchase Of This Pma Will Support The Existing Systems And Prevent Delay Should The Integration System Go Down. minimum Specifications remote Monitoring: - Providing The Ability To Be Outside Of The Or And, Using Hospital Designated Credentials, Safely Monitor Progress Within Via A Secure Network. One Can Check The Status Of A Room Or Of A Case Via Room Camera, Endoscopic Or Robotic Image, In-light Camera, Or Any Other Routable Image Hooked Into The System With The Touch Of A Button. collaboration Among Nih And Other Research Institutes - Through A Secure Network, Those Allowed Access Are Able To Log-on To The Server Using Hospital Accredited Credentials To View Current And Previous Cases. Videos Can Be Edited, Images Can Be Telestrated Over, And Notes Can Be Added For Presentations All Via The Application. web Based And Teleconference Consultation And Collaboration - Anyone Who Has Been Given Access To The Server From The Hospital Will Have The Ability For Bi-directional Communication Into And Out Of The Designated Ors. This Provides Live Consultation And Collaboration On Difficult Cases And The Ability To Work More Efficiently With Pathology. Live Streaming Allows Those Allowed To Sign On, To View In Real-time, The Same Image As Those They Are Working With For More Efficient Collaboration. contract Duration: All Systems Have A Co-terminus Start And End Date. Service Agreement For Base Year (5/31/24 - 5/30/25) With option Year 1 (5/31/25 - 5/30/26) & Option Year 2 (5/31/26 - 5/30/27) this Acquisition Is Being Conducted Using Policies Unique To The Federal Acquisition Regulation (far) Part 13 – Simplified Acquisition Procedures, Subpart 13.106-1(b)(1), For Purchases Not Exceeding The Simplified Acquisition Threshold (sat), Contracting Officers May Solicit From One Source If The Contracting Officer Determines That The Circumstance Of The Contract Action Deem Only One Source Reasonably Available. Contracts Awarded Using Far Part 13-simplified Acquisition Procedures Are Exempt From The Requirements Of Far Part 6-competition Requirements. interested Parties May Identify Their Interest And Capabilities In Response To This Posting. The Determination By The Government Not To Compete The Proposed Requirement Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government.

Details: Nasa’s Technology Transfer Program Solicits Inquiries From Companies Interested In Obtaining License Rights To Commercialize, Manufacture And Market The Following Technology. License Rights May Be Issued On An Exclusive Or Nonexclusive Basis And May Include Specific Fields Of Use.nasa Provides No Funding In Conjunction With These Potential Licenses. the Technology: when Testing Composite Structures, It Is Important To Understand The Response Of The Structure To The Load. Of Significance Is The Formation Of Damage And Growth Of That Damage Leading To Ultimate Failure. Understanding How A Structure Fails Allows For Optimal Designs For Improved Safety And Performance For The Part During Its Life Cycle. Inspection Methods Are Required To Determine Damage Initiation And Growth In Advanced Composite Structures During Loading. Past Methods For In-situ Inspection Of Composite Structures During Loading Have Involved Acoustic Emission, Passive Thermography, Digital Image Correlation, And Fiber Optics Techniques. However, Each Of These Has Critical Limitations. The Combination Of Thermal And Acoustic Emission (ae) Nondestructive Evaluation (nde) Techniques, By Mapping The Acoustic Emission Events Onto The Thermal Imagery, Provides A Very Sensitive Measurement System For Detecting Damage Formation And Growth. this Technology Provides A Methodology To Measure Damage Onset And Grow At Multiple Locations In A Composite Structure During Fatigue Loading. The Thermography Inspection Is Non-contact And Can Cover Very Large Areas. The Acoustic Emission Sensors Require Contact At Only The Sensor Attachment Points And Can Cover Large Areas. The Acoustic Emission Measurement Is Very Sensitive To Damage Formation Events Such As Matrix Cracking, Fiber Breaks, And Delamination, However The Event Location Is Approximate. An Infrared Camera Is Able To Detect Damage Growth And Location At Areas Of Heating (due To Fiber Breaks, Rubbing Of Disbond Areas And Matrix Cracks) And Thus Confirm The Acoustic Emission Measurements. If The Loading Is Cyclic The Infrared Camera Is Also Able To Detect The Relative Depth Of The Damage. Combining Both Technologies Helps To Reduce False Indications, Confirm Damage Growth Areas And Where Ultimate Failure Will Occur. This Provides A Measurement Capability To Detect Growing Damage (location And Size) For Improved Structures Testing Or During In-service Applications. Multiple Infrared (ir) Cameras And Multiple Acoustic Emission Sensors Can Be Employed Internally Or Externally For Full Coverage Of The Structure. When Significant Damage Growth Is Detected, The Structure Can Be Taken Out Of Service For Repair Or For Further Inspections. This Technology Has Been Demonstrated For Structures Testing. In-situ Nde Inspections Are Necessary To Provide Structural Engineers A Tool To Incrementally Control And Document Damage Growth As A Function Of Fatigue Cycles Before Failure. This Allows For The Comparison Of Nde Results To Develop And Validate Progressive Damage Analysis (pda) Models. The Ultimate Goal Is To Use The Validated Pda Models To Decrease The Time Required To Certify Composite Structures And Therefore Save Development Costs. Real Time Nde Can Document The Progression Of Damage And Provide The Documentation Of Ultimate Failure Mechanisms. to Express Interest In This Opportunity, Please Submit A License Application Through Nasa’s Automated Technology Licensing Application System (atlas) By Visitinghttps://technology.nasa.gov/patent/lar-tops-247 if You Have Any Questions, Please E-mail Nasa’s Technology Transfer Program Atagency-patent-licensing@mail.nasa.govwith The Title Of This Technology Transfer Opportunity As Listed In This Sam.gov Notice And Your Preferred Contact Information. For More Information About Licensing Other Nasa-developed Technologies, Please Visit The Nasa Technology Transfer Portal Athttps://technology.nasa.gov/ these Responses Are Provided To Members Of Nasa’s Technology Transfer Program For The Purpose Of Promoting Public Awareness Of Nasa-developed Technology Products, And Conducting Preliminary Market Research To Determine Public Interest In And Potential For Future Licensing Opportunities.no Follow-on Procurement Is Expected To Result From Responses To This Notice.

Details: Nasa’s Technology Transfer Program Solicits Inquiries From Companies Interested In Obtaining License Rights To Commercialize, Manufacture And Market The Following Technology. License Rights May Be Issued On An Exclusive Or Nonexclusive Basis And May Include Specific Fields Of Use.nasa Provides No Funding In Conjunction With These Potential Licenses. the Technology: researchers At Nasas Langley Research Center Have Developed A Simple, Compact, Easy-to-use Projection Focusing Schlieren Imaging System Optical Assembly That Leverages A Light Source, A Single Physical Grid Element, And Polarization Optics To Enable Hi-res Flow Visualization. The Assembly Can Simply Be Mounted In Front Of A Camera To Enable Focusing Schlieren Imaging Capability. The Assembly Was Designed To Drastically Reduce The Complexity And Time Required To Align A Focusing Schlieren Imaging Experiment. Conventional Focusing Schlieren Imaging Systems And Projection-based Analogs Require Cumbersome Grid Alignment And Peripheral Resources To Function (e.g., Separate Source And Cutoff Grids, Projectors, Specialized Software). Nasas System Leverages A Single Physical Grid As Both The Source And Cutoff Grid, So The System Is Self-aligned, Compact, Does Not Require Specialized Software, And Costs Less Than Other Projection-based Alternatives. nasas Single Grid, Self-aligned Focusing Schlieren Optical Assembly Is Attached To A Commercial-off-the-shelf Camera. It Directs Light From The Light Source Through A Condenser Lens And Linear Polarizer Towards A Polarizing Beam-splitter Where The Linear, Vertically-polarized Component Of Light Is Reflected Onto The Optical Axis Of The Instrument. The Light Passes Through A Ronchi Ruling Grid, A Polarizing Prism, And A Quarter-wave Plate Prior To Projection From The Assembly As Right-circularly Polarized Light. The Grid-patterned Light (having Passed Through The Ronchi Grid) Is Directed Past The Density Object Onto A Retroreflective Background That Serves As The Source Grid. Upon Reflection Off The Retroreflective Background, The Polarization State Of Light Is Mirrored. It Passes The Density Object A Second Time And Is Then Reimaged By The System. Upon Encountering The Polarizing Prism The Second Time, The Light Is Refracted Resulting In A Slight Offset. This Refracted Light Passes Through The Ronchi Ruling Grid, Now Serving As The Cutoff Grid, For A Second Time Before Being Imaged By The Camera. Both Small- And Large-scale Experimental Set Ups Have Been Evaluated And Shown To Be Capable Of Fields-of-view Of 10 And 300 Millimeters Respectively. Observed Depths Of Field Were Found To Be Comparable To Existing Systems. Light Sources, Polarizing Prisms, Retroreflective Materials And Lenses Can Be Customized To Suit A Particular Experiment. For Example, With A High Speed Camera And Laser Light Source, The System Has Collected Flow Images At A Rate Of 1mhz. to Express Interest In This Opportunity, Please Submit A License Application Through Nasa’s Automated Technology Licensing Application System (atlas) By Visitinghttps://technology.nasa.gov/patent/lar-tops-348 if You Have Any Questions, Please E-mail Nasa’s Technology Transfer Program Atagency-patent-licensing@mail.nasa.govwith The Title Of This Technology Transfer Opportunity As Listed In This Sam.gov Notice And Your Preferred Contact Information. For More Information About Licensing Other Nasa-developed Technologies, Please Visit The Nasa Technology Transfer Portal Athttps://technology.nasa.gov/ these Responses Are Provided To Members Of Nasa’s Technology Transfer Program For The Purpose Of Promoting Public Awareness Of Nasa-developed Technology Products, And Conducting Preliminary Market Research To Determine Public Interest In And Potential For Future Licensing Opportunities.no Follow-on Procurement Is Expected To Result From Responses To This Notice.

Details: Description Republic Of The Philippines City Of Manila Bids And Awards Committee Barangay 428 Zone 43 District Iv, Manila Invitation To Bid (itb) The Barangay 428 Zone 43 District Iv, Manila, Through It's Bids And Awards Committee (bac), Invites All Interested Suppliers To Bid For The Here Under Project/s: R/m-cctv, Computer Set, Motorcycle, Clean And Beautification Materals And Sports Materials To Wit: 1.) 12 Pcs - Camera, 2mp, 1080, Hd 2.) 12 Pcs - Video Balun 3.) 12 Pcs - Power Supply Adaptor, 2 Amp 4.) 5 Rolls - Utp Cable Wire, Cat6, 305 Meters 5.) 5 Pails - Paint Latex, Gloss 6.) 6 Boxes - Paint Qde, Traffic Yellow, 4 Gallons 7.) 6 Boxes - Paint Qde, Blue, 4 Gallons 8.) 6 Boxes - Paint Qde, Red Oxide, 4 Gallons 9.) 1 Dozen - Paint Brush 4" 19.) 1 Dozen - Paint Brush 2" 11.) 6 Pcs - Basketball, Leather 12.) 4 Pairs - Badminton Racket 13.) 4 Tubes - Shuttlecock, 10 Pcs, 14.) 1 Unit - Motorcycle With Registration 15.) 1 Set - Computer With Printer 3 In 1, Tv Monitor, Keyboard, Mouse And Pad Bid Proposals/quotations, Shall Be Submitted To The Bac Chairman Or Bac Secretariat On Or Before March 17, 2025 At 9:00 A.m. And It Will Be Opened Immediately On The Same Day March 17, 2025 At 10:00 A.m., In Front Of Attending Bidders Or Theiry Duly Authorized Representatives, Coa And Ngo Representatives. The Venue Of Bidding Will Be At The Barangay Hall, Located At 484 Paltoc Street, Sampaloc, Manila. The Bids And Awards Committee Resolves The Right To Accept Or Reject Any Or All Bids, To Annul The Bidding Process At Any Time Prior To Contract Award, Thereby Incurring Any Liabilities To The Affected Bidders Therein And Accept The Lowest Calculated And Responsive Bid Which Is Most Advantageous To The Barangay Government. The Invitation To Bid Shall Be Posted At Barangay Hall, Coa Office And Philgeps. Requesting Officer/end User: Barangay 428 Zone 43 District Iv, Manila. Approved Budget For The Contract (abc): Php 498,624.00 Source Of Fund: Mooe. C.o., Bdf, Bcpc - Ab 2025 Daniel C. Gasga Bac Secretariat

Description: Electrical Power Fixed Network of Traffic Control and Surveillance Cameras

Description: Supply And Delivery Of Blogging Camera And Network Attached Storage For Paco , Information Technology ,cavite State University

Description: Pilot Camera Central Loop No. 99

Details: Description 1unit Laptop Display 14.0 - Inch 2.8k (2880 X 1800) Oled 16:10 Aspect Ratio, 0.2ms Response Time, 90hz Refresh Rate 550nits Hdr Peak Brightness, 100% Dci-p3 Color Gamut 1,000,000:1, 1.07 Billion Colors , Pantone Validated, Glossy Display, 70% Less Harmful Blue Light , Sgs Eye Care Display ,touch Screen ,( Screen -to Body) 90% With Stylus Support. Memory 8gb Lpddr4x On Board *support Dual Channel Memory. Storage 512gb M.2 Nvme 3.0 Ssd I/o Ports 1x Usb 3.2 Gen 2 Type- A; 2x Usb 3.2 Gen 2 Type C Support Display / Power Delivery; 1x Hdmi 2.1 Tmds; 1x 3.5mm Combo Audio Jack; Micro Sd Card Reader . Keyboard & P0rts Backlift Chiclet Keyboard , 1.4mm Key Travel Touchpad Support Numberpad Camera 720p Hd Camera Audio Smart Amp Technology; Built- In Speaker; Built-in Array Microphone; Harman /cardon ( Premium) With Cortana Voice Recognition Support Network And Communication Wi-fi 6e(802.11ax) (dual Band 2*2 + Bluetooth 5.3 Wireless Card Battery 75whrs ,2s2p, 4 -cell Li-ion Power Supply Type-c, 65w Ac Adapter, Output; 20v Dc, 3.5a, 65w, Input:100-240v Ac 50/60ghz Universal Weight 1.39 Kg (3.06lbs) Dimension (wxdxh) 31.36 X 22.06x 1.69 – 1.69cm (12.35’’x 8.69’’x 0.67-0.67’’)