Cable Tenders

Details: This Is A Sources Sought Notice. No Proposals Are Being Requested Or Will Be Accepted In Response To This Posting. If You Are Interested In Proposing On The General Scope Of Work Stated Below For A Design-build Project, Please Respond By Email Only To Krista.miller@gsa.gov. Please Provide Your Bonding Capacity, A Capability Statement, And Your Small Business And Small Business Socioeconomic Status, If Any. Please Include In Your Capability Statement Projects Which Your Firm Has Completed That Are Particularly Relevant To This Scope Of Work, Especially Involving Exterior Structural And Glazing Improvements, And/or Performed In Hawaii. general Statement Of Work Summary: the Prince Jonah Kuhio Kalaniana’ole (pjkk) Federal Building And Courthouse Is Located At 300 ala Moana Blvd., Honolulu, Within The Hawaii Capital District And On The Outskirts Of The Downtown central Business District. This Reinforced, Cast In Place Concrete With Concrete Masonry And Glass curtain Walls Is A Two-building Mid-century Modern Complex Originally Constructed In 1977. The illuminated Entry Pavilion Was Originally Designed By Gensler Sf And Constructed By Swinerton construction In January 2015. The Illuminated Entry Pavilion Design Was An Elegant, Iconic Aia award Winning Design That Unified Two Separate Entries Into A Single, Sky Lighted And Transparent entrance For The Pjkk Complex. The Single Portal/pavilion Simplified The Circulation For The Public and Created A Strong Sense Of Entry For Pjkk. on April 6, 2021 A Fire Occurred At The Entry Pavilion That Created Significant Damage. On January 24, 2022, Clifford Planning Architecture Completed A Fire Investigation Report That Stated “it Is probable The Entry Pavilion Fire Initiated Was A Result Of An Electrical Fault Within The Led Light Panel installed Adjacent To The Bottom Panel Of The South Wall Of The Entry Pavilion. Low Level Arcing Over a Period Of Time Was The Likely Source Of Heat For Ignition Of The Acrylic Panel Material” (see volume 4 – Fire Investigation). As Further Defined In The Fire Investigation Report, There Was Fire damage To Architectural Finishes And Structural Members. The Scope Of Work For The Entry Pavilion includes, But Is Not Limited To, Installing (2) Temporary Covered Entry Tunnels To The Existing United states Marshal Service (usms) And Federal Protection Services (fps) Security Check-point locations, Providing Code Compliant Construction Documents And Full Design Services That Adhere to The Original Gensler Design And Architectural Appearance Of The Original Entry Pavilion, While also Making The Necessary Design Changes To Address The Issues That Contributed To The Fire And smoke Damage As Further Defined In Volume 4 - Fire Investigation. The Design Should Also include Solutions For The Following Known Building Maintenance Issues: 1. The Original Design Led Panels Were Located Behind Heavy Glass Panels That Created issues For Regular Maintenance And Care. 2. The Original Designed Entry Door Operated On A Small Pin That Would Fail And Was Difficult to Replace. in Addition To The Scope Above, The Design And Construction Of The Courthouse Hardening Upgrades To The entry Pavilion And Ground Level Windows And Doors Facing Halekauwila Street And Ala Moana Boulevard are A Requirement For This Project. The Judiciary Had Previously Sought From Congress Supplemental appropriations To Fund Enhanced Security Measures To Protect Judges And The Judicial Process In Response to The Civil Unrest Following The Murder Of George Floyd And The January 6th Attack On The U.s. Capitol. the Judicial Conference Approved Funding To Begin Enhanced Security Measure Projects To Harden courthouses. initial Stakeholders From The General Services Administration (gsa), The Administrative Office Of The U.s. courts (ao), U.s Marshals Service (usms), And The Federal Protective Service (fps) Worked Together To analyze Potential Security Measures To Be Used In This Program. This Scope Of Work Covers The countermeasures For The Pjkk Courthouse In Honolulu, Hi: 1. Windows: Impact Resistant Window Glazing System At The Entry Pavilion And ground Level Courthouse Windows And Doors Facing Halekauwila Street And Ala moana Boulevard, Excluding Ground Level Windows Along The United States marshal Service Offices And Within The Confines Of The Exterior Secured Courtyard: ● Windows / Doors / Frames – Shall Meet A Minimum 15-minute Forced entry Resistance Per Astm F3038 Or Dept Of State (dos) sd-std.01.01 Rev G (amended) – Forced Entry Resistance Is The standard That Shall Apply. ● The Contractor Shall Install A New Shatter Break Resistance Riot Glazing system ● Contractor Is Responsible To Field Verify And Measure Each Opening. 2. Exterior Doors And Hardware (see Volume 2b_existing Pavilion Design drawings For Specific Locations): ● All Exterior Pavilion Entry Doors And Interior Courthouse Pavilion Vestibule doors Shall Be Equipped With Hardware And Controls To Engage electro-magnetic And/or Electro-mechanical Remote Locks. ● Remote Locks Shall Give The Ability For The Court Security Officers And The usms To Lock All Doors Immediately In Case Of An Emergency. ● Remote Lock Override Control Shall Run To The Main Usms / Cso Control room the Courthouse Hardening Upgrades Will Upgrade The Ground Level Courthouse Windows And doors And Replace All Window, Exterior Doors, And Hardware Included In The Original Gensler designed Pjkk Entry Pavilion. the Forced Entry Resistance Doors And Windows Shall Meet A Minimum 15 Minute Forced Entry resistance In Accordance With Astm Standard F3038-21, With The Following Exception. Astm standard F3038-21 Requires A Full Scale Test For Each Unique System Size And Configuration, however, If The Actual Overall System Dimensions Are Within 6” (both Height And Width Dimension) of Another Successfully Tested System Meeting The Requirements Of Astm Standard 3038-21, And the System Components Are Of Similar Size And Makeup, The Proposed System Shall Be Considered acceptable. Support Documentation Shall Be Provided Prior To Installation. the Construction Services Scope Of Work Includes Demolition Of The Remaining Pavilion Structure, build-out Of (2) Temporary Tunnels To Access The Existing Usms And Fps Security Check-points, the Build-out Of The New Entry Pavilion, Installation Of The Courthouse Hardening Window And Door upgrades, Including But Not Limited To Structural, Architectural Finishes, Lighting, Mechanical, electrical, Plumbing, Fire And Life Safety, And Data/cabling Infrastructure. the Federal Building And Courthouse Must Remain Fully Operational Throughout Design And construction. All Construction Work Related To This Project Shall Be Scheduled From 5:00 Pm To 7:00 am, After Normal Building Operation Hours To Minimize Disruptions To Building Occupants And To maintain Public Safety. Normal Building Operation Hours Are From 7:00 A.m. To 5:00 P.m. weekdays. the Project Delivery Method Is Design-build (db). the Db Contractor Shall Provide All Supervision, Labor, Materials, Equipment, And Testing Required to Accomplish The Design And Construction For The Pjkk Entry Pavilion And Courthouse Hardening project. design Services Shall Include, But Are Not Limited To, Design And Certification By A State Of Hawaii licensed Architect-engineer (a/e), Design Reviews, Weekly Progress Meetings, Design development, Construction Documents, Basis Of Design Documents, Site Investigation, Site measurements And Verification, Code Compliance, Reproduction Services, Consultant Coordination, contract Administration, Contract Close-out, Record Drawings And As-builts. construction Services Shall Include, But Are Not Limited To, Complete And Timely Submission Of security Clearance Applications For Workers (hspd-12 And Tenant Agency Review), Project schedule, Cost Estimating, 3-week Look Ahead Schedules, Demolition, Site Supervision, Drywall, mechanical, Electrical, Automatic Sprinkler System, Architectural Finishes, Submittal Samples, submittal Schedule, Hvac, System Balancing, Structural, Fire And Life Safety, Security Infrastructure, protocols For Utility Outages, Separation Of Utilities To Avoid Impacts To Occupied Areas, Temporary barricade Plan, Noise Mitigation, Clean Up After Work, Lead Weekly Meetings And Provide Minutes, file And Record Management, And All Other Work To Meet The Contract Requirements.

Details: Description This Is A 1 Lot Procurement | Total: 705,526.70 Stock No. Unit Item Description Quantity Total Cost 1 Dozen Ballpen *blue. | 25 | 2,400.00 2 Dozen Ballpen *red. | 5 | 480.00 3 Dozen Ballpen Black | 29 | 2,784.00 4 Set Battery *aa Charger 4 Batteries Rechargeable | 1 | 2,760.00 5 Pack "battery *dry Cell, Aa, 1.5 Volts, Alkaline, 2 Piece Per Pack" | 26 | 3,432.00 6 Pack "battery *dry Cell, Aaa, 1.5 Volts, Alkaline, 2 Piece Per Pack" | 4 | 528.00 7 Pack "battery *dry Cell, Aaa, 1.5 Volts, Alkaline, 4 Piece Per Pack" | 10 | 2,500.00 8 Piece Broom *soft (tambo), Weight: 200g Min Tiger Grass. | 95 | 14,250.00 9 Piece Broom *stick (ting-ting), Usable Length: 760mm Min. | 71 | 3,124.00 10 Piece "brush *laundry Brush *type: Plastic *size:14.5cm X 5cm" | 6 | 1,080.00 11 Pack Cable Ties #4 , 100pcs | 28 | 1,064.00 12 Piece "cash Box *powder Coated Steel, 11.8''l X 9.5''w, Safety Key Lock ,cover On Coin Tray With Spring Clips" | 1 | 906.00 13 Piece "certificate Holder *holder/jacket. *material: Plastic (transparent). *size: A4 Size." | 51 | 8,415.00 14 Piece Certificate Holder *size: A4. Color: Black | 141 | 10,857.00 15 Bottle "cleaner *type: Toilet Bowl And Urinal. *net Content: 1000ml (1l) In Rigid Plastic Bottle. *color: Clear Or Blue. *bactericidal, Fully Miscible In Water (not Chlorine Based), Kills Germs And Bacteria (professional Cleaning Solution)." | 85 | 21,250.00 16 Piece "clip Backfold *all Metal *size: 73mm Or 3"" (-1mm) *color: Black" | 16 | 211.20 17 Box "clip Backfold *all Metal, 12 Pieces Per Box *size: 25mm Or 1"" (-1mm) *color: Black" | 30 | 1,485.00 18 Box "clip Backfold *all Metal, 12 Pieces Per Box *size: 32mm Or 1 1/4"" (-1mm) *color: Black" | 15 | 907.50 19 Box "clip Backfold *all Metal, 12 Pieces Per Box *size: 50mm Or 2"" (-1mm) *color: Black" | 26 | 1,716.00 20 Piece "counting Money Wax *for Easy Counting Sorting Filing *for Paper And Foils, Does Not Stick *hygenic, Anticbacterial Finger Moistener *apply To Fingertips" | 100 | 3,500.00 21 Piece "data Folder *customized, Material: Board, Color: Blue., Size: Legal/long" | 20 | 5,500.00 22 Piece "data Folder *materials: Made Of Chipboard 2.5mm Thick. *deminsion (wxhxl): 75mm (3"") X 230mm (9"") X 380mm (15""). *with All Steel Lever Arch File Mechanism And Taglia Lock." | 30 | 6,600.00 23 Piece "detergent Powder *all Purpose Cleaner,size: 500ml,scent: Floral" | 50 | 14,400.00 24 Pack Detergent Powder *all Purpose, 1kg Per Pack. | 193 | 31,845.00 25 Gallon "dishwashing Liquid *4l Per Gallon. *liquid, Odorless, Antibacterial. *for Utensils And Equipment." | 35 | 12,250.00 26 Bottle Dishwashing Liquid Size: 250ml, Lemon | 147 | 19,404.00 27 Piece "dishwashing Pad/sponge *heavy Duty With Green Pad (scrub). *size (hxwxd): 75 X 75 X 30mm." | 40 | 2,200.00 28 Piece "dishwashing Paste *400 Grams,lemon Scent And Anti Bacterial Free Sponge." | 57 | 5,016.00 29 Can Disinfectant Spray *aerosol Type, 400 Grams (min). | 6 | 3,300.00 30 Piece Dust Pan *non-rigid Plastic, With Detachable Handle. | 14 | 1,540.00 31 Box "envelope *documentary, Kraft For A4 Size Document, 500 Pieces Per Box." | 1 | 900.00 32 Box "envelope *expanding, Kraft For Legal Size Document, With String And Eyelet Or Elastic Strap, 100 Pieces Per Box." | 1 | 1,320.00 33 Piece "envelope *expanding File Envelope *color: Orange, Long Size File Organizer With Handle And 13 Pockets, With Buckle Closure" | 9 | 1,800.00 34 Box "envelope *mailing, White, 70gsm, *envelope Size: Width: 105mm (-3mm), Length: 241mm (-3mm), 500 Pieces Per Box." | 10 | 5,500.00 35 Piece Envelope Expanding, Plastic, Legal, Plain White | 48 | 1,680.00 36 Piece "feather Duster *soft Feather Duster, Strong Adsorption Capacity, Wooden-dowel Handle." | 2 | 240.00 37 Piece Floor Mop *360 Rotating Head Magic Floor Spin Mop. | 24 | 36,000.00 38 Bundle Folder *kraft, Size: Legal/long, Color: White | 2 | 1,200.00 39 Box "folder *pressboard, Size: 240mm X 370mm (-5mm), *material: Heavy Duty Paper Board, *expansion: 39mm (-3mm), *100 Pieces Per Box." | 1 | 2,000.00 40 Piece "garbage Picker *long Handle *size; 80cm *alluminum/alloy *plastic Grip" | 30 | 5,100.00 41 Bottle "glass Cleaner *glass And Multi-surface Cleaner, 500ml, In Plastic Spray Bottle. *removes Dirt For A Streak-free Long Lasting Shine." | 39 | 10,725.00 42 Piece Glass Wiper Squeegee (rubber Blade) | 10 | 2,500.00 43 Jar "glue *all-purpose, Dries Clear, Non-toxic, Paste With Applicator. *gross Weight: 200 Grams." | 32 | 2,816.00 44 Bottle "hand Soap *liquid *antibacterial *with Moisturizer, Citrus Flavor *750 Ml" | 167 | 33,400.00 45 Gallon "liquid Bleach *disinfectant (99% Antibac), Whitens, Remove Stains/odor/germs, Multipurpose Bleach, (3 In 1 Total Clean)." | 8 | 6,400.00 46 Piece "long Arm Stapler *heavy Duty *320mmx38mm *materials:metal" | 3 | 1,200.00 47 Piece "marker *permanent, Black, *tip: Felt, Bullet Type, *point: Medium." | 418 | 6,897.00 48 Piece "marker *permanent, Blue, *tip: Felt, Bullet Type, *point: Medium." | 50 | 825.00 49 Piece "marker *whiteboard, Black, *tip: Felt, Bullet Type." | 520 | 11,440.00 50 Piece "marker *whiteboard, Blue, *tip: Felt, Bullet Type." | 1291 | 28,402.00 51 Piece Mug *color: White, 330ml | 21 | 1,995.00 52 Gallon "muriatic Acid *with Power Clean Chemicals, Removes Dust Stain, Hard Water Deposits & Disinfectants." | 5 | 1,250.00 53 Pad Notepad *stick-on, 2 X 3, 100 Sheets Per Pad | 20 | 880.00 54 Pad Notepad *stick-on, 4 X 4 | 50 | 4,400.00 55 Pad Notepad *stick-on, With "sign Here". | 30 | 1,650.00 56 Pack "paper *certificate Paper, With Border, Size: 210mm X 297mm (a4), Color Gold, 10's Per Pack" | 111 | 18,315.00 57 Ream Paper *multi-purpose, 70 Gsm., Size: 210mm X 297mm (a4) | 87 | 20,575.50 58 Ream "paper *multi-purpose, 70 Gsm., Size: 216mm X 330mm (legal/long)" | 279 | 70,587.00 59 Piece Paper *manila Paper, 1 Whole | 23 | 460.00 60 Ream "paper *newsprint Paper *size: Legal" | 70 | 16,100.00 61 Pack "paper *photo Paper, Size: 210mm X 297mm (a4), 180 Gsm, Matte, 20's Per Pack" | 70 | 11,550.00 62 Pack "paper *specialty Board, Size: 8.5"" X 13"" (legal/long), Gsm: 185 *color: Cornfield Cream" | 77 | 6,083.00 63 Pack Paper *specialty Board, Size: A4, Gsm: 185. | 56 | 5,600.00 64 Pack "paper *specialty Board, Size: A4, Gsm: 240. *20 Sheets Per Pack." | 20 | 6,000.00 65 Pack "paper *specialty Paper, Size: 8.5"" X 11"" (letter/short), Gsm: 85 *colored, 20's Per Pack" | 54 | 4,752.00 66 Pack "paper *specialty Paper, Size: 8.5"" X 13"" (legal/long), Gsm: 85, Colored, 20's Per Pack" | 50 | 4,675.00 67 Pack Paper *sticker Paper, Size: 8.5" X 13" (legal/long) | 5 | 550.00 68 Box "paper Clip *vinyl Coated, 33mm (1 1/4"" Min), 52 Grams, 100 Pieces Per Box" | 12 | 198.00 69 Piece Puncher *paper, Heavy Duty, With Two Hole Guide, 1 | 28 | 6,160.00 70 Dozen "rags Material: Microfiber Dimensions: 30 X 30cm" | 5 | 1,485.00 71 Piece Ring Binder *plastic, 1/2", Black *1 Meter | 15 | 660.00 72 Box Rubber Band *70mm Min Lay Flat Length (#18) | 6 | 1,320.00 73 Dozen Sign Pen *black, 0.7mm Needle Tip. | 14 | 5,852.00 74 Piece Sign Pen *black, Liquid/gel Ink, 0.5mm Needle Tip | 518 | 22,792.00 75 Dozen Sign Pen *blue, 0.7mm Needle Tip. | 10 | 4,180.00 76 Piece Sign Pen *blue, Liquid/gel Ink, 0.5mm Needle Tip | 404 | 17,776.00 77 Dozen Sign Pen *red, 0.7mm Needle Tip. | 10 | 4,180.00 78 Piece Sign Pen *red, Liquid/gel Ink, 0.5mm Needle Tip | 277 | 12,188.00 79 Piece "stamp Pad *felt, Bed Dimension: 60mm X 100mm Min *metal Case" | 2 | 352.00 80 Box "staple Wire *standard, (26/6) Or No.35, Full Strips Staples, *5000 Wires Per Box, *number Of Wires Per Strip: 100." | 31 | 1,705.00 81 Piece Stapler *standard Type, Load Cap: 200 Staples Min | 87 | 23,925.00 82 Pack Sticker *type : Matte , A4 | 25 | 700.00 83 Pack Sticker *vinyl Sticker, Long 20's | 66 | 18,480.00 84 Roll Tape *double Sided, With Foam, Width: 24mm (1"). | 30 | 1,200.00 85 Roll Tape *electrical, 18mm X 16m Min. | 23 | 632.50 86 Roll Tape *masking, Width: 24mm (1") (â±1mm) | 43 | 3,074.50 87 Roll Tape *packaging, Width: 48mm (2") (â±1mm) | 25 | 1,237.50 88 Piece Tape Dispenser *table Top, 24mm (1") Width Tape | 14 | 3,080.00 89 Piece "toilet Brush *toilet Bowl Scrub Double Side Cleaning Brush, With Plastic Handle." | 5 | 875.00 90 Pack Trashbag *size:(24'' X 32'')*100's Per Pack. | 80 | 40,000.00 91 Roll "trashbag *black, 940mm X 1016mm (38"" X 40""), 10pcs Per Roll" | 35 | 6,755.00 92 Piece "trashbin Size: 45 Liter:36*36*60cm Material Type: Plastic W/ Rotating Cover" | 11 | 5,247.00 Note: Delivery Period: Within Thirty (30) Calendar Days Upon Receipt Of P.o Partial Bid Is Not Allowed Download And Use The Official Canvass Form In The Associated Components Please Fill In The Savings/current Account Name & Account Number Please Indicate Item Offer With Brand/s And Model/s Of The Specific Item

Details: Description Invitation To Bid The Nueva Ecija University Of Science And Technology (neust) Through The Bids And Awards Committee (bac), Hereby Invites All Interested Entities Registered With The Philippine Government Electronic Procurement System (philgeps) To Bid For The Hereunder Project, Subject To The General Conditions Stated Herein. Name Of Project: Upgrading Of Programmable Logic Controller (plc) System In The Mechatronics Laboratory Location: College Of Industrial Technology, Neust Gen. Tinio (st.) Campus, Cabanatuan City Approved Budget For The Contract: Php6,419,764.00 Contract Duration: 120 Calendar Days Source Of Fund: Income Cost Of Bidding Documents: Php10,000.00 Project Description: 1lot Item No. Description Qty Unit 1 Programmable Logic Controller For Mechatronics Training System Training Device For The A4 Mounting Frame Or As A Desktop Device With Modern, Industrially Used Programmable Logic Controller And System Interfaces For A Mechatronics Station. It Ensures Highest Performance And User-friendliness For Medium And High-end Applications Of Machine And Plant Automation. Benefits • Stable, Powder-coated, Sheet-steel Mounting System • Suitable For One Mechatronics Station And Suitable As A Tabletop Unit • Mounting Rail For 19" Module Is Attached To The Mounting System • Equipped With 4 Mm Safety Sockets • Integrated Power Supply Further Information The Stable Powder-coated Sheet Steel Support System Contains A 19" Module System Plug Syslink (9 Te), With 2x Syslink Plug-in Connection For Mechatronics Station And Control Panel, Each With 8 Digital Inputs And 8 Digital Outputs And 1x D-sub 15-pin Plug-in Connection With 4 Analog Inputs And 2 Analog Outputs, Emergency Stop Bridge For Connecting A Safety Circuit To Switch Off 8 Digital Outputs. Technical Data: - Dimensions (w X H): 305 Mm X 297 Mm (size 1) - Integrated Power Pack: 100 ... 240 V Ac ±10%; Necessary Accessories: Iec Cables 5 Units 2 Programmable Logic Controller For Electro-pneumatics Training Device For Er Recording Frame (pneumatic/hydraulic) For Solutions In Discrete And Stand-alone Automation Applications Of The Lower Power Range. Further Information The Modular Small Controller Can Be Used For Solutions In Discrete And Stand-alone Automation Applications In The Lower Performance Range. Technical Details: • Digital Inputs On 4 Mm Safety Sockets And Switches/buttons For Signal Simulation • Digital Outputs On 4 Mm Safety Sockets • Analog Inputs And Outputs On 4 Mm Safety Sockets • Simulation Module With 2x Syslink Connector For Control Panel With Digital Inputs And Outputs And D-sub 15-pin Connector With Analog Inputs And Outputs; 4 Mm Safety Sockets For Emergency Stop Bridge To Connect A Safety Circuit For Digital Outputs The Carrier System Consists Of A Lightweight Injection-moulded Housing, Suitable For An Er Mounting Frame Size 2, Dimensions (w X H X D): 364 Mm X 170 Mm X Approx. 80 Mm. The Unit Is Delivered Fully Assembled. Special Licensing Rules Apply To Schools And Training Centers In The Commercial Sector. 6 Units 3 Electro-pneumatics Simulator Software Simulation Software For Pneumatics Is An Application For Creating And Simulating Pneumatic And Electropneumatic Circuits. Valuable Technical Skills Are Learned By Designing Circuits And Simulating Them Interactively. Learning Goals • Creation Of Circuit Diagrams • Identifying And Preventing Errors • Optimization Of Solution Circuit Diagrams Through Interactive Simulations • Understanding Solution Development • Observing Effects Through Real-time Simulations Benefits • Convenient Creation Of Circuit Diagrams And Their Interactive Simulation • Content Tailored To Festo Didactic Learning Systems • Can Be Used Online And Offline • Learning The Effects Of Changes In A Technical Setup And Observing Their Immediate Consequences Through Real-time Simulation • Extensive Library Of Pneumatic, Hydraulic, Electrical Engineering, Electronic And Digital Components. • Further Information Simulation Software For Pneumatics Makes It Possible To Create (electro-)pneumatic Circuits And Simulate Them Interactively. State Changes And Switching Processes Are Calculated Realistically, And Interactive Interventions Can Be Made By Actuating Switches Or Switching Valves. Signals Can Also Be Transmitted Via Connected Hardware Or From Other Programs. In Addition To Real Measuring Devices, Fluidsim 6 Offers Virtual Measuring Devices. Circuits Can Be Constructed From A Library Of Various Electropneumatic Components. In Addition, Grafcet Diagrams Can Be Created And Included In The Simulation If Desired. Simulation Software For Pneumatics Covers The Following Topics: • Pneumatics/electropneumatics • Closed-loop Pneumatics • Vacuum Technology • Electrical Controllers • Digital Technology • Grafcet 6 Units Warranty: • One (1) Year Against Factory Defects Must Include: • On-site Installation And Testing • Three (3) Days Rigid Training For Faculty And Laboratory Technicians • Must Provide Official Partner Or Authorization To Bid From Manufacturer • Iso 9001:2015 Quality Management System Certification From The Manufacturer • Iso 14001: 2015 Environmental Management Certificate From The Manufacturer The Summary Of The Bidding Activities Is As Follows: Activities Schedule 1. Advertisement December 11-18, 2024 2. Issuance Of Bid Documents December 19, 2024 To January 3, 2025 3. Pre-bid Conference December 19, 2024, 2:30pm (via Zoom) 4. Deadline For Submission Of Bids (manual Submission) January 3, 2025, Until 5:00pm Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City 5. Opening Of Bids (face To Face) January 6, 2025, 9:00am Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City General Conditions: All Particulars To The Eligibility Statement And Screening, Bid Security, Performance Security, Pre-bidding Conference, Evaluation Of Bids, Post Qualification And Award Of Contract Shall Be Governed By The Pertinent Provisions Of R.a. 9184 And Its Implementing Rules And Regulations. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Business Organizations With At Least Sixty Percent (60%) Interest Or Ownership Of At Least 60% Of The Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Business Organizations Of A Country Where The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From December 19, 2024 To January 3, 2025 Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Pay The Applicable Fee For The Bidding Documents Not Later Than The Deadline For Submission Of Bids. Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before January 3, 2025, Until 5:00pm. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In The Pbd. Late Bids Shall Not Be Accepted. On The Last Day For The Submission Of Bids And No Prospective Bidder/s Submitted Its Bid Documents Or Only One (1) Bid Was Submitted For The Above-mentioned Project, The Same Is Deemed Extended Until January 10, 2025, 5:00 Pm. This Is To Protect The Interest Of The University And Full Opportunity For A Competitive Bidding May Be Achieved. The University Likewise Reserves The Right To Cause Extension Or Postponement Of The Filing Of Bids Should Similar Situation Arises. Bid Opening Shall Be On January 6, 2025, 9:00 Am At The Bac Conference Room, Gen. Tinio (st.) Campus, Cabanatuan City Unless Extended. Bids Will Be Opened In The Presence Of The Bidder Or His/her/its Duly Authorized Representative/s. Failure To Attend During The Opening Of Bids Shall Be Considered A Waiver On The Part Of The Bidder Who Likewise Waives His/her/its Right To Raise Questions During The Bidding Procedures. The Nueva Ecija University Of Science And Technology Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For More Information Concerning This Bidding, Please Contact The Following: Engr. Joel G. De Mesa Head, Bac Secretariat For Goods And Services Neust Gen. Tinio St., Cabanatuan City Email Address: Neust.bacsec@gmail.com Approved By: Dr. Honorato P. Panahon (sgd.) Bac Chairperson

Details: Polregio Sa, invites Contractors with knowledge and experience in the subject of the Order to submit price information for the supply of 3 Emergency Door Opening Handles (external with cable) + Quality Certificate, with delivery to Kędzierzyn - Koźle. Please submit price information taking into account the payment term of 30 days from the date of delivery of a correctly issued invoice. Please add an appendix taking into account the delivery term. Please add offers for new components. Please be informed that in accordance with: A) Art. 7 Sec. 1 of the Act of 13 April 2022 on Specific Solutions for Counteracting Support for Aggression Against Ukraine and for Protecting National Security (Journal of Laws of 2022, item 835), B) Art. 5k of Council Regulation (EU) No. 833/2014 of 31 July 2014 concerning restrictive measures in connection with Russia's actions destabilizing the situation in Ukraine (OJ EU No. L 229 of 31.7.2014, p. 1). The Contractor Who Will Be Selected to Fulfill the Order Will Be Obliged to Submit a Declaration on the Lack of Grounds for Exclusion - The Template of the Declaration Can Be Found in the Attachments Folder. In the "attachments" tab you will find: - GDPR Information Clause - Declaration

Description: Item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| inspection Of Supplies--fixed-price (aug 1996)|2||| inspection And Acceptance - Short Version|8|x||x|||||| stop-work Order (aug 1989)|1|| general Information-fob-destination|1|b| wide Area Workflow Payment Instructions (jan 2023)|16|invoice And Receiving Reports (combo)|n/a|tbd|n00104|tbd|tbd|see Schedule|tbd|n/a|n/a|n/a|||||| federal Acquisition Supply Chain Security Act Orders-prohibition (dec 2023)|12||||||||||||| notice Of Total Small Business Set-aside (oct 2020)(deviation 2020-o0008)|1|| alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| small Business Program Representations (feb 2024)|4|||x|| annual Representations And Certifications (may 2024)|13|334515|750|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| the Purpose Of This Amendment Is To Extend The Due Date To 06 Jan 2025. All Other Terms And Conditions Remain The Same. the Purpose Of This Amendment Is To Change The Procurement From A Restricted Environment To A Sbsa. The Solicitation Point Of Contact Is Hereby Changed To Carly Gassert, Carly.a.gassert.civ@us.navy.mil. Revised Irpod And Drawing Documents Are Available At The Bpmi Site. Vendor Review Of The Irpod Is Mandatory. The Due Date Is Hereby Extended To 06 Dec 2024. All Other Terms And Conditions Remain The Same. unless Otherwise Specified, Pricing For This Request For Quote Is Valid For 60 Days After The Closing Date As Indicated On The Proposal. Please Specify (if Other Than 60 Days) ______________ Days. if You Are Submitting Your Quote Via E-mail Or Neco Please Specify The Number Of Days Pricing Is Valid. all Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders, Delivery Orders And Modifications) Related To The Instant Procurement Are Considered To Be 'issued' By The Government When Copies Are Either Deposited In The Mail, Transmitted By Facsimile, or Sent By Other Electronic Commerce Methods, Such Ase-mail. The Government's Acceptance Of The Contractor's Proposal Constitutes Bilateral Agreement To 'issue' Contractual Documents As Detailed Herein. technical Documents Associated With This Solicitation, Such As Drawings, Individual Repair Part Ordering Data (irpod), Strs And Other Procurement Related Documents May Be Obtained At: https://logistics.unnpp.gov this Website Requires A Password And Pre-registration. Please Contact The E-commerce Help Desk At 518-395-4357 To Register Or For Help Logging Into The Website. a Hard Copy Of The Individual Repair Part Ordering Data (irpod) And/or Drawingswill Not Be Mailed To You. to Request A Copy Of The Solicitation, Please Contact The Contracting Officer Listed And Provide Your Cage Code. in Order For Your Offer To Be Considered, You Must Submit Your Quote Prior To The Closing Date/time Listed On This Solicitation. section "s" Of Clause 52.212-4, Order Of Precedence, Is Not Applicable To This Procurement. \ all Drawings Required For Procurement Of 109022gp8, Probe & Cable Assembly Havebeen Identified And A New Irpod Has Been Created To Include These Drawings. Pd Has Been Revalidated And New Irpod And All Drawings Are Now Available In E-commerce. unless Otherwise Specified, Pricing For This Request For Quote Is Valid For 60 Days After The Closing Date As Indicated On The Proposal. Please Specify (if Other Than 60 Days) ______________ Days. if You Are Submitting Your Quote Via E-mail Or Neco Please Specify The Number Of Days Pricing Is Valid. all Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders, Delivery Orders And Modifications) Related To The Instant Procurement Are Considered To Be 'issued' By The Government When Copies Are Either Deposited In The Mail, Transmitted By Facsimile, or Sent By Other Electronic Commerce Methods, Such Ase-mail. The Government's Acceptance Of The Contractor's Proposal Constitutes Bilateral Agreement To 'issue' Contractual Documents As Detailed Herein. technical Documents Associated With This Solicitation, Such As Drawings, Individual Repair Part Ordering Data (irpod), Strs And Other Procurement Related Documents May Be Obtained At: https://logistics.unnpp.gov this Website Requires A Password And Pre-registration. Please Contact The E-commerce Help Desk At 518-395-4357 To Register Or For Help Logging Into The Website. a Hard Copy Of The Individual Repair Part Ordering Data (irpod) And/or Drawingswill Not Be Mailed To You. to Request A Copy Of The Solicitation, Please Contact The Contracting Officer Listed And Provide Your Cage Code. in Order For Your Offer To Be Considered, You Must Submit Your Quote Prior To The Closing Date/time Listed On This Solicitation. section "s" Of Clause 52.212-4, Order Of Precedence, Is Not Applicable To This Procurement. \ 1. Scope 1.1 In The Event Of A Conflict Between Section "c" And Section "d" Of The Contract/purchase Order, Section "c" Will Take Precedence. 2. Applicable Documents 2.1 Applicable Documents; technical Documents Associated To This Solicitation Or Award Such As; Irpod, Drawings,technical Data, Strs, As Well As Certain Military Specifications, And Commercial Item Descriptions (cid) Etc. May Be Obtained At (https://logistics.unnpp.gov/ecommerce) These Documents, At The Required Revision Levels That Are Associated To Either This Solicitation Or Award, Become A Part Of This Solicitation Or Award Unless Changed By An Admendment To The Solicitation Or Modification To the Award. this Website Requires A Password And Pre-registration. To Obtain Instruction On How To Register And Obtain A Password Contact The Bpmi Website Administrator. 3. Requirements 3.1 Navsup Wss-mech Code N94 Additional Technical Documentation order Of Precedence And Effective Issues Of Cited Documentation Dated: July 2004 a. Order Of Precedence For Document Conflict Resolution: The Technical And Quality Requirements Applicable To Manufacture Of The Material Being Purchased Under This Order Are Contained Or Invoked In One Or More Of The Documents Listed Below. In The Event Of any Inconsistencies Between Any Provisions Of This Order, The Order Or Precedence Shall Be As Follows: 1. Amendments To The Purchase Order/contract 2. Schedule Of Supplies Of The Purchase Order/contract. 3. Terms And Conditions Of The Purchase Order/contract. 4. Individual Repair Part Ordering Data (irpod); Or Master Procurement Specification, As Applicable. 5. Any Invoked Standard Technical Requirements (strs). 6. Drawings Referenced In The Irpod, Or Master Procurement Specification , As Applicable. 7. Specifications Referenced In The Irpod, Master Procurement Specifications Or Drawing(s), As Applicable. b. Effective Issues Of Cited Drawings, Specifications, Standards And Other Documents: 1. The Contractor Shall Comply With The Specified Revisions Of The Documents (i.e. Drawings,specifications,standards And Other Documents) Cited In The Irpod And/or Procurement Specification Contained Herein. The Contractor Shall Obtain Written Approval for The Contracting Officer To Use Document Revisions Other Than Those Specified. When A Later Drawing Revision Is Submitted For Approval, Two Full Size Clear Legible Prints Shall Be Provided. 2. Where Documents Are Referred To Only By The Basic Identification Name Or Number And No Specific Revision Thereto, The Contractor Use Of Any Issue Of The Document Except All Such Revisions Shall Be Dated 1 November 1969 Or Later. c. Use Of Document Revisions In Their Entirety: 1. Contractors Shall Use Revisions To Each Cited Or Referenced Document In Its Entirety Unless The Contractor Obtains Contracting Officer Approval To Do Otherwise (i.e. The Contractor Shall Not Use Portions Of Different Revisions Of A Document). d. Vendor Waiver/deviations On Critical Contracts. 1. Compliance With The Delivery Date And Technical Requirements Of Navsup Wss Critical Repair Part Material Contracts Is Expected. 2. As The Cautionary Note Contained In The Contract States, Seller Intended Use Of Any Material Which Is Not In Full Compliance With The Specified Contract Technical Requirements, Should Be Identified As An Exception In Advance Either At The Time The Quotation is Submitted Or Prior To Manufacture. 3. Requests For Delivery Date Extensions And Waivers/deviations Should Be Accompanied By An Explanation Of The Cause For The Delay, Or The Reason For The Requested Non-conformance With An Offer Of Consideration In The Event The Contracting Officer Concurs With your Request. 4. Requests For Waivers/deviations Should Provide Justification For The Requested Change Including An Evaluation Which Demonstrates That Proposed Non-conformance Will Not Affect The Quality, Form, Fit, Or Function Of The Part. Where A Proposed Alternate Or replacement Item Is Offered, Supporting Technical Data (catalog Page, Drawing (s), Etc.) That Fully Describe The Proposed Item Shall Be Provided For Technical Evaluation. 5. Requests Which Do Not Contain The Above Information Will Be Returned And Will Not Be Submitted To Technical/engineering Review Until Sufficient Justification Is Provided. 6. Requests For Waivers/deviations Shall Be Presented To The Government Quality Assurance Representative (qar) For Comment. The Qar Shall Forward The Request, With Their Comments, Directly To The Post Award Pco Identified In The Contract/purchase Order Within five Working Days After Receipt. e. Exclusion Of Mercury 1. Mercury Or Mercury Containing Compounds Shall Not Be Intentionally Added To Or Come In Direct Contact With Hardware Or Supplies Under This Contract. 4. Quality Assurance 4.1 The Quality Assurance Requirements Are Located In The Individual Repair Part Ordering Data (irpod). the Contractor Shall Provide And Maintain An Inspection System Acceptable To The Government Covering The Supplies Herein. records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of This Contract And For Such Longer Periods As May Be Specified Elsewhere In The Contract. 5. Packaging 5.1 When The Cleanliness Control Requirements Of One Or More Of The Following Documents Are Invoked: Mil-std-767, Mil-std-2041, Refueling Clean, Or Reactor Plant Clean, The Following Clarification Of Requirements For Mil-prf-23199 Packaging Of Repair Parts applies. (1). The Following Summary Clarifies The Packaging Requirements Of Mil-prf-23199 Pertaining To The Use Of Mil-dtl-24466 Green Poly Bags. The Supplier Remains Responsible For Meeting All Contract Requirements. Suppliers Who Are Unsure Of The Packaging, Packing, and Marking. requirements For A Particular Part Should Request Clarification By Contacting The Navsup-wss Contracting Poc. (a). Paragraph 3.4.2 Of Mil-prf-23199 Discusses Level B Packaging And Refers To Paragraph 3.3.1 For The Method Of Packaging. Paragraph 3.3.1 Provides Several Methods Of Packaging. Packaging In Heat Sealed Envelopes Is Covered In Paragraph 3.3.1.1 Which States, "components Which Are Subject To Cleanliness Controls (see 6.2) Or As Specified (see 6.1) Shall Be Packaged In Heat Sealed Envelopes (see 3.2.2.5 And 3.2.2.5.1)". (2). The Following Conditions Must Be Satisfied In Order For Mil-dtl-24466 Bags To Apply: (a). Paragraph 6.2 Of Mil-prf-23199 Defines Cleanliness Controls As Any Reference To (or Application Of) The Cleanliness Control Requirements Of One Or More Of The Following Documents: Mil-std-767, Mil-std-2041, Refueling Clean, Reactor Plant Clean, Or Other requirements Identified Within The Irpod. the Repair Part Must Have Cleaning Requirements Of One Of The Aformentioned Methods. (b). Paragraph 6.1 Contains Ordering Data Options. Paragraph 6.1(k)2. Provides An Option To Specify The Method Of Packaging To Be Used When Packaging Is Other Than In Accordance With Paragraph 3.3.1.1 Only. If A Contract Specifies Any Additional Requirements for The Use Of Green Poly Bags, Then They Are Required And Take Precedence. (4). The Use Of Fire Retardant Packaging Material Is No Longer Required In Any Navsup-wss N94 Contract. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 1. Nuclear Reactor Publications Assigned Navsea Document And Identification Numbers That Are Not Available From Bpmi E-commerce Web Site Must Be Requested From: contracting Officer navsup Wss-mech code N943 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 requests For "official Use Only" And "noforn" (not Releasable To Foreign Natio Nals) Documents Must Identify The Quotation Number On Pre-award Procurement Actions. Requests Must Be Submitted To The Pco For Certification Of "need-to-know" For The Document. On post-award Actions, The Request Must Identify The Government Contract Number, And Be Submitted Via The Defense Contract Management Agency (dcma) For Certification Of "need-to-know" For The Document. 2. Commercial Specifications, Standards And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. They May Be Obtained From The Publishers Or Societies Of The Applicable Documents. 6.2 In Accordance With Dodi 5230.24 All Documents And Drawings Provided By The U.s. Navy To Prospective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. There Are 6 (six) Separate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. 6.3 Information Regarding Abbreviations, Symbols And Codes Appearing On Dd Form 1423 - The Following Information Is Provided To Assist In Understanding The Intent Of The Requirement To Provide A Deliverable Item To The Government. The Explanation Of abbreviation, Symbols And Codes Found In A Block Follows The Block Number As They Appear On The Dd Form 1423. block A: Is The Actual Contract Line Item No. block B: Is The Actual Collective Physical List Of The Deliverable Item(s) Which Are Part Of The Total Requirement Of The Contract/purchase Order. block C: Is The Category Of Data Required, Tdp Is Defined In Mil-t-31000. Tm Is Defined In Part 1x, Section B Of Dodi 5000.2. Navsup-wss Has Reasoned That Most Dd Form 1423's Included In Our Solicitations Meet The Requirement Of Tdp As Navsup-wss Does Not Regularly Purchase Only Technical Manuals Without Purchasing Hardware And Related Tdp Software. Therefore, Most Navsup-wss Dd Form 1423 Category Code Will Be Tdp. block D: Is The Name Of The Parent System, Next Higher Assembly, Or The Item Being Purchased. block E: Is The Purchase Request Number, Request For Proposal Number, Invitation For Bid Number Or Another Number For Tracking And Monitoring Purposes. block F: Is The Successful Offerors Name And Or Cage Code. block G: Is The Name Of The Individual And Or The Code/activity Of The Individual Who Prepared The Dd Form 1423 And Included The Requirement In The Technical Data Package (tdp). block H: Self Explanatory. block I: Is The Name And Signature Of The Individual Who Approved The Content And The Need For Inclusion Of The Dd Form 1423 In The Tdp. block J: Self Explanatory. block 1: Is The Exhibit Line Item Number (elin). block 2: Is The Title Of The Data Item Cited In Block 4. block 3: Is The Subtitle Of The Data Item Cited In Block 4 And Is Used If The Title Requires Clarification. block 4: Is The Actual Data Item Description (did) Number Or The Actual Technical Manual Contract Requirements Number. In The Event The Dd Form 1423 Is Requiring A Technical Manual The Numbered Tmcr Will Be An Attachment To The Contract/purchase Order. block 5: Is The Section And Paragraph Area, Where The Requirement Statement For The Dd Form 1423 Will Be Found. block 6: Is The Activity That Will Inform The Contractor Of Approval, Conditional Approval Or Disapproval Of The Deliverable Item. block 7: Is A Code Which Designates Authority For Inspection And Acceptance Of The Deliverable Item. The Definition Of The Codes Is As Follows: Dd Form 250 Code Inspection Acceptance Ss (1) (2) Dd (3) (4) Sd (1) (4) Ds (3) (5) Lt (6) (7) No (8) (8) Xx (9) (9) (1) Inspection At Source. (2) Acceptance At Source. (3) No Inspection Performed At Source. Final Inspection Performance At Destination. (4) Acceptance At Destination. (5) Acceptance At Source. Acceptance Based On Written Approval From The Contract Officer. (6) Letter Of Transmittal Only. Lt Should Not Be Used When Inspection Is Required. The Data Is Sent By The Contractor Directly To The Personnel Listed In Block 14 Of The Dd Form 1423. Lt Is Used When The Contracting Agency Does Not Desire To Have A Dd Form 250 For Each And Every Piece Of Data Developed By The Contractor. The Only Other Authorized Use Of Lt Is The Special Case Where The Contracting Agency Does Not Desire To Have Separate Dd Forms 250 But Desires To Have A Government Quality Assurance Representative Perform Inspection. The Government Quality Assurance Representative Shall Be Listed On The Distribution In Block 14 And Requested To Provide Comments Via The Quality Assurance Letter Of Inspection. Use Of The Symbol Lt Is Not Authorized For Data Comprising Final Delivery Of Technical Data Package Of For Technical Manuals. (lt May, However, Be Used For Delivery Of Preliminary Tdp's Or Tm's). (7) As Specified In Block 8 Of The Dd Form 1423. (8) No Inspection Or Acceptance Required. No Dd Form 250 Or Letter Of Transmittal Required. Use Of The Symbol No Is Not Authorized For Data Comprising Technical Data Packages Or For Technical Manuals. (9) Inspection And Acceptance Requirements Specified Elsewhere In The Contract. block 8: Is The Approval Code - Items Of Critical Data Requiring Specific Advanced Written Approval Prior To Distribution Of The Final Data Item Will Be Identified By Placing An "a" In This Field. This Data Item Requires Submission Of A Preliminary Draft Prior To Publication Of A Final Document. When A Preliminary Draft Is Required, Block 16 Of The Dd Form 1423 Will Show Length Of Time Required For Government Approval/disapproval And Subsequent Turn-around Time For The Contractor To Resubmit The Data After Government Approval/disapproval Has Been Issued. Block 16 Will Also Indicate The Extent Of The Approval Requirements, E.g., Approval Of Technical Content And/or Format. block 9: Is The Distribution Statement Code Which Explains How The Government Can Circulate The Deliverable Item. The Definition Of Codes A, B, C, D, E, Or F Is As Follows: A. Distribution Of The Item Is Unrestricted. B. Distribution Of The Item Is Limited To Agencies Only. C. Distribution Of The Item Is Limited To Contractors With A Cage Code And Have A Dd Form 2345 On File With The Dla Logistics Information Services (dlis) Battle Creek, Mich. Or Government Activities. D. Distribution Of The Item Is Limited To Dod Activities And Dod Contractors Only. E. Distribution Of The Item Is Limited To Dod Components Only. F. Distribution Of The Item Is Restricted From Foreign Nations And Foreign Nationals. block 10: Is The Frequency Which The Deliverable Item Is Expected To Be Delivered To The Government. The Abbreviations And Their Meaning. Annly Annually Asgen As Generated Asreq As Required Bi-mo Every Two Months Bi-we Every Two Weeks Daily Daily Dfdel Deferred Delivery Mthly Monthly One/r One Time With Revisions Qrtly Quarterly Semia Every Six Months Wekly Weekly Xtime Number Of Times To Be Submitted (1time, 2times...9times) Use Of These Codes Requires Further Explanation In Block 16 To Provide The Contractor With Guidance Necessary To Accurately Price The Deliverable Data Item. Other Abbreviations Not Appearing On The Above List May On Occasion Be Used In Block 10 Of The Dd Form 1423. When Other Abbreviations Are Used They Will Be Fully Explained In Block 16 Of The Dd Form 1423. block 11: Is The Last Calendar Date, Expressed In Year/month/day Format, The Deliverable Item Is To Be Received By The Requiring Office Cited In Block 6 Of The Dd Form 1423 For An Item With A Block 10 Entry Indication A Single Delivery. If The Item Is To Be Submitted Multiple Times, The Number Stated Is The Number Of Calendar Days After The Frequency Cited In Block 10 The Item Is To Be Received By The Requiring Office Cited In Block 6 Of The Dd Form 1423. On Occasion The Deliverable Item Will Be Required To Be Submitted Prior To The End Of The Frequency Cited In Block 6. In That Event The Requirement Will Be Fully Explained In Block 16 Of The Dd Form 1423. block 12: Is The Date Of First Submission Of The Deliverable Item To The Requiring Office (block 4) Expressed In Year/month/day Format. The Abbreviations And Their Meaning Are As Follows: Asgen As Generated Asreq As Required Dac Days After Contract Date Dfdel Deferred Delivery Eoc End Of Contract Eom End Of Month Eoq End Of Quarter Specific Instructions For These Requirements Will Be Provided In Block 16. If The Deliverable Item Is Constrained By A Specific Event Or Milestone The Constraint Will Be Fully Explained In Block 16 Of The Dd Form 1423. "as Generated", "as Required", And "deferred Delivery" Will Always Be Fully Explained In Block 16. block 13: Is The Date Of Subsequent Submission Of The Deliverable Item, After The Initial Submission. Subsequent Submission Is Only Used To Indicate The Specific Time Period. The Data Is Required When Block 10 Of The Dd Form 1423 Indicates Multiple Delivery Is Required. This Does Not Apply To Resubmission Of A Deliverable Item That Has Been Reviewed By The Requiring Office And Determined To Be Only Conditionally Acceptable Or Unacceptable. block 14a: Will Contain The Activity Name(s) Where The Deliverable Item Is To Be Sent. If The Activity Is Other Than Dcma Or Navsup-wss The Full Name, Address (including Code) Will Be Specified. That Specific Information Will Be Located In Block 16 Of The Dd Form 1423. block 14b: Is The Number Of Copies Of Draft And Or Final Copies To Be Submitted. When Final "repro" Copies Are To Be Submitted Block 16 Will Clarify The Type Of Repro Copies Required. (e.g., Vellum, Negative, Etc.) block 15: Is The Total Of Each Type Of Copies To Be Submitted As Required By Block 14. block 16: Is The Block Used To Provide Additional Or Clarifying Information Blocks 1 Through 15. This Block Is Also The Only Area Used To Tailor The Document Listed In Block 4. Only Deletions To The Minimum Requirements Stated In The Document In Block 4 Are Allowed. Block 16 May Also Be Used To Specify The Medium For Delivery Of The Data. block 17: Is The Block Where The Bidder Or Offeror Is To Enter The Appropriate Price Group. The Price Groups Are Defined As Follows: A. Group I - Data Which The Contractor Prepares To Satisfy The Government's Requirements. The Contractor Does Not Need This Type Of Data To Perform The Rest Of The Contract. Price Would Be Based On Identifiable Direct Costs, Overhead, General And Administrative (g&a) And Profit. B. Group Ii - Data Essential To Contract Performance Which Must Be Reworked Or Amended To Conform To Government Requirements. The Price For Data In This Group Would Be Based On The Direct Cost To Convert The Original Data To Meet Government Needs And To Deliver It, Plus Allocable Overhead, G&a And Profit. C. Group Iii - Data Which The Contractor Must Develop For His Own Use And Which Requires No Substantial Change To Conform To Government Requirements Regarding Depth Of Content, Format, Frequency Of Submittal, Preparation, And Quality Of Data. Only The Costs Of Reproducing, Handling And Delivery, Plus Overhead, G&a And Profit, Are Considered In Pricing Data In This Group. D. Group Iv - Data Which The Contractor Has Developed As Part Of His Commercial Business. Not Much Of This Data Is Required And The Cost Is Insignificant. The Item Should Normally Be Coded "no Charge." An Example Is A Brochure Or Brief Manual Developed For Commercial Application Which Will Be Acquired In Small Quantities, And The Added Cost Is Too Small To Justify The Expense Of Computing The Charge That Otherwise Would Go With The Acquisition. block 18: Enter The Total Estimated Price Equal To That Portion Of The Total Price Which Is Estimated To Be Attributable To The Production Or Development For The Government Of That Item Of Data. The Entry "n/c" For "no Charge" Is Acceptable. the Packaging Label Shall Be Marked With The Nomenclature As Cited On Irpod. date Of First Submission=eoc submit At The Time Of Material Delivery A Certificate Of Compliance Per Di-misc-81356 To Navsup-wss Code N9433. A Separate Certificate Of Compliance Shall Be Prepared And Submitted For Each Unique Combination Of Contract/purchase Order Number, National Stock number And Item Nomenclature Specified In The Schedule Of Supply/services. di-misc-a81356 Cited In Block 4 Is A Unique Navsup-wss Dd1423 Sequence Control number - Certification Package To Be Iaw Did Di-misc-81356(latest Rev).

Details: Description Republic Of The Philippines Batangas State University Batangas City Request For Quotation "procurement Of Semi-expandable Ict Equipment For Various Offices " 1. The Batangas State University (batstate U) Through The Bids And Awards Committee Invites Interested Firms/supplier To Submit Quotation For The Project "procurement Of Semi-expandable Ict Equipment For Various Offices " With An Approved Budget For The Contract (abc) Four Hundred Fifty-eight Thousand Five Hundred Pesos Only (php 458,500.00). Quotation Received In Excess Of The Abc Shall Be Automatically Rejected At The Opening. Item No. Qty Description Total 1 4 Unit All In One Printer Functions : Print, Scan, Copy Memory: 128mb Display: 1 Line Lcd Interface: Hi-speed Usb 2.0 Wired/wireless Network: Wireless Lan Print Speed (laser Comparable): Up To 17ipm (mono) And 16.5ipm (colour) Print Speed (fast Mode): Up To 30ppm (mono) And 26ppm (colour) Print Resolution: Up To 1200 X 6000 Dpi 2-sided Print: Automatic (up To A4/ltr) Direct Wireless Connection: Wi-fi Direct Maximum Copy Size: A4 Copy Speed (laser Comparable): Up To 13ipm (mono) And 10.5ipm (colour) Copy Speed (fcot): Up To 10.5 Sec (mono) And 21 Sec (colour) Copy Resolution (colour): Print Max. 1200 X 2400 Dpi; Scan Max. 1200 X 600 Dpi Maximum Scan Size: Up To A4 Scan Resolution: Optical: Up To 1200 X 2400 Dpi; Adf: Up To 1200 X 600 Dpi) Scan Speed: From 3.35 Sec/4.38 Sec (a4 Size, 100 X 100 Dpi) Paper Input (standard Type): Up To 150 Sheets (80g/m2) Paper Output: Up To 50 Sheets (up To A4) Paper Handling Sizes: A4, Ltr, Exe, A5, A6, Photo 4" X 6", Indexcard 5" X 8", C5 Envelope, Com-10, Dl Envelope, Monarch 57,600.00 2 1 Unit All-in-one Color Ink Tank Printer Function: Multi-function (print, Scan & Copy) Output Color: Color Print Technology: Inkjet Print Speed: Black - 8.8ppm; Color - 5ppm Number Of Nozzles: Total 1,472 Nozzles Resolution: 4800 X 1200dpi (max.) Paper Size: A4, A5, B5, Letter, Legal, 4 X 6 Inch, 5 X 7 Inch, 8x 10 Inch, Envelopes (dl, Com10), Square (5 X 5 Inch), Business Card. Custom: (width 55 – 215.9mm, Length 89 – 676mm) Paper Type: Plain Paper, High Resolution Paper, Photo Paper Plus Glossy Ii, Photo Paper Plus Semigloss, Matte Photo Paper, Envelope, Glossy Photo Paper, Photo Sticker Paper Weight: Plain Paper: 64 – 105g/m2, Canon Specialty Paper 275g/m2; Photo Paper Plus Glossy Ii (pp-201). Input Capacity: 100 Sheets Input Tray Output Capacity: 50 Sheets Output Tray Duplex Printing: Manual (driver Support Provided) Scanner Type: Flatbed Scanning Speed: 19s Scan Resolution: 600 X 1 200dpi Scan Paper Size: A4, Letter 10,700.00 Page 1 Of 5 Item No. Qty Description Total Multiple Copy: 1 – 20 Pages Copy Speed: 3.5ppm Connectivity: 1 Hi-speed Usb 2.0, Wi-fi Display: 1.2 Inch Segment Lcd Display Wireless: Yes, Ieee 802.11n / Ieee 802.11g / Ieee 802.11b Ink Tank: Yes Power: Input Voltage: Ac 100 – 240v; 50 / 60hz; Power Consumption: 11w (1.2w Standby) Ink Bottle: Gi-790 Black (6,000) Pages, Gi-790 Cyan, Magenta, Yellow (7,000) Pages 3 3 Unit All-in-one Ink Tank Printer Printer Type: Print, Scan, Copy Print Method: On-demand Inkjet (piezoelectric) Printer Language: Esc/p-r, Esc/p Raster Nozzle Configuration: 180 X 1 Nozzles Black, 59 X 1 Nozzles Per Colour (cyan, Magenta, Yellow) Maximum Resolution: 5760 X 1440 Dpi Automatic 2-sided Printing: No Print Speed: Photo Default - 10 X 15 Cm / 4 X 6 " *1: Approx. 69 Sec Per Photo (border) / 90 Sec Per Photo (borderless)*2 Draft, A4 (black / Colour): Up To 33.0 Ppm / 15.0 Ppm*2 Iso 24734, A4 Simplex (black / Colour): Up To 10.0 Ipm / 5.0 Ipm*2 First Page Out Time From Ready Mode (black / Colour): Approx. 10 Sec / 16 Sec*2 Maximum Copies From Standalone: 20 Copies Maximum Copy Resolution: 600 X 600 Dpi Maximum Copy Size: A4, Letter Iso 29183, A4 Simplex (black / Colour): Up To 7.0 Ipm / 1.7 Ipm Scanner Type: Flatbed Colour Image Scanner Sensor Type: Cis Optical Resolution: 600 X 1200 Dpi Maximum Scan Area: 216 X 297 Mm Scanner Bit Depth (colour): 48-bit Input, 24-bit Output Scanner Bit Depth (grayscale): 16-bit Input, 8-bit Output Scanner Bit Depth (black & White): 16-bit Input, 1-bit Output Flatbed (black / Colour): 200dpi: Up To 11 Sec / Up To 32 Sec Number Of Paper Trays: 1 Standard Paper Input Capacity: Up To 100 Sheets Of Plain Paper (80 G/m2); Up To 20 Sheets Of Premium Glossy Photo Paper Output Capacity: Up To 30 Sheets Of Plain Paper (80 G/m2); Up To 20 Sheets Of Premium Glossy Photo Paper Maximum Paper Size: 215.9 X 1200 Mm Paper Sizes: Legal (8.5 X 14"), Indian-legal (215 X 345 Mm), 8.5 X 13", Letter, A4, 16k (195 X 270 Mm), B5, A5, B6, A6, Hagaki (100 X 148 Mm), 5 X 7", 5 X 8", 4 X 6", Envelopes: #10, Dl, C6 Print Margin: 0 Mm Top, Left, Right, Bottom Via Custom Settings In Printer Driver*3 Operating System Compatibility: Windows Xp / Xp Professional / Vista / 7 / 8 / 8.1 / 10 Windows Server 2003 / 2008 / 2012 / 2016 / 2019 Mac Os X 10.6.8 Or Later Usb: Usb 2.0 Printer Software: Epson Scansmart 28,800.00 4 5 Unit Color Document Scanner Specifications Scanner: 249,500.00 Page 2 Of 5 Item No. Qty Description Total Scanner Type: Sheet-fed, 1-pass, Duplex Color Scanner Optical Resolution:600 Dpi Maximum Resolution:1200 Dpi Interpolated Monochrome Bit Depth:1-bitoutput Resolution:50 To 1200 Dpi Effective Pixels:5100 X 9300 Light Source:3-color Rgb Led Scanning Speed:letter Size: 45 Ppm/70 Ipm: 300 Dpi Black-and-white, Color, Gray Automatic Document Feeder: Capacity:100 Sheets Document Sizes: Paper Size Minimum: 2" X 2" Paper Size Maximum: 8.5" X 240" At 200 Dpi, 8.5" X 215" At 300 Dpi Daily Duty Cycle: 5,000 Sheets Paper Weight: 27 –413 G/m2 Consumables: Roller Assembly Kit: 200,000 Pages General: Operating Systems: Windows® 10 Windows 8/8.1 Windows 7 Mac Os X® 10.9.8 – Macos® 10.12.x Software Requires Internet Connection For Download And Installation. Temperature: Operating: 41 ° To 95 °f (5 ° To 35 °c) Storage: -13 ° To 140 °f (-25 ° To 60 °c) Humidity: Operating: 10 – 80% (no Condensation) Dimensions: Product Only: 11.7" X 7.7" X 12.5" Product In Package: 14.5" X 9.9" X 11.5" Weight: Product Only: 8.1 Lb. Product In Package: 10.6 Lb. 5 4 Unit Computer Speaker Dimensions Height: 110 Mm Width: 90 Mm Depth: 88 Mm Weight: .25 Kg Technical Specifications Total Watt (rms): 1.2w 3.5 Mm Input: 1 Usb Cable For Power: 1 Controls Power And Volume Controls On Right Speaker 3,000.00 6 3 Unit Computer Web Camera Resolution: Full Hd 1080p, 1920*1080 Pixels Lens Type: Full Hd Glass Lens Viewing Angle: 70 Degrees Focus Type: Fixed Focus Focus Range: 60cm And Beyond Built-in Mic.: Digital Hd Mic. Output Format: Mjpeg Frame Rate: 30fps Usb: Usb 2.0 System Requirements Compatible With: Windows 7 /8 / 8.1 / 10 Or Later Works In Usb Video Device Class (uvc) Mode: Mac Os 10.10 Or Later 3,900.00 Page 3 Of 5 Item No. Qty Description Total Linux Os 2.6 Or Later Chrome Os 6.0 Or Later Android V6.0 Or Later Compatible With Social And Video Calling Software Of The Above System 7 1 Unit Dot Matrix Printer Print Method: Impact Dot Matrix Print Direction: Bi-direction With Logic Seeking Number Of Pins In Head: 9 Pins Print Speed: High Speed Draft: (10 / 12 / 15 Cpi): 347 / 357 / 390 Cps (condensed, 17 / 20 Cpi): 383 / 298 Cps Draft: (10 / 12 / 15 Cpi): 260 / 312 / 223 Cps (condensed, 17 / 20 Cpi): 222 / 260 Cps (emphasized, 10 Cpi): 130 Cps Nlq: (10 / 12 / 15 / 17 / 20 Cpi): 65 / 78 / 55 / 47 / 56 Cps Reliability: Printhead Life: Approx. 400 Million Strokes/wire Mean Print Volume Between Failure (mvbf): Approx. 20 Million Lines (except Print Head) Mean Time Between Failure (mtbf): Approx. 10,000 Poh (25% Duty) Print Characteristics: Character Sets: Italic Table, Pc437 (us Standard Europe), Pc850 (multilingual), Pc860 (portugese), Pc861 (icelandic), Pc863 (canadian French), Pc865 (nordic), Abicomp, Brascii, Roman 8, Iso Latin 1, Pc 858, Iso 8859-15 Paper Path: Manual Insertion: Rear In, Top Out Push Tractor: Rear In, Top Out Paper Media: Cut Sheet (single Sheet): Length: 100 ~ 364mm (3.9 ~ 14.3") Width: 100 ~ 257mm (3.9 ~ 10.1") Thickness: 0.065 ~ 0.14mm (0.0025 ~ 0.0055") Cut Sheet (multi-part Forms): Length: 100 ~ 364mm (3.9 ~ 14.3") Width: 100 ~ 257mm (3.9 ~ 10.1") Thickness: 0.12 ~ 0.39mm (0.0047 ~ 0.015") (total) Continuous Paper (single Sheet / Multi-part): Length: 101.6 ~ 558.8mm (4.0 ~ 22.0") Width: 101.6 ~ 254.0mm 4.0 ~ 10.0") Thickness: 0.065 ~ 0.39mm (0.0025 ~ 0.015") (total) Envelope (no.6): 14,000.00 Page 4 Of 5 Item No. Qty Description Total Length: 92mm (3.6") Width: 165mm (6.5") Thickness: 0.16 ~ 0.52mm (0.0063 ~ 0,0205") (total) Envelope (no.10): Length: 105mm (4.1") Width: 241mm (9.5") Thickness: 0.16 ~ 0.52mm (0.0063 ~ 0.0205") (total) Roll Paper: Width: 216mm (8.5") Thickness: 0.07 ~ 0.09mm (0.0028 ~ 0.0035") Supported Os And Applications: Supported Os: Microsoft® Windows® 2000 / Xp / Vista / 7 / 8 / 8.1 / 10 8 6 Piece External Hard Drive Connection Interface: Usb 3.0 Capacity: 1tb Storage Media: 2.5" Hdd 19,200.00 9 1 Unit Monitor 34 Inches” Wqhd (3440x1440) High Resolution 21:9 Ultra Wide Display 121% Srgb 144hz High Refresh Rate Immersive 1500r Curvature 144hz Curved Monitor 20,000.00 10 14 Piece Ssd Form Factor 2.5? Capacity 1 Tb Interface Sata Iii Dimensions (l X W X H) 0.28? X 3.96? X 2.75? Sequential Read Performance 535mb/s Sequential Write Performance 450mb/s" 51,800.00 Note: Kindly Indicate The Brand On Your Quotation. 2. Philgeps Registration Certificate And Other Business Permits Shall Be Attached Upon Submission Of The Quotation. 3. The Quotation Must Be Submitted (can Also Be Send Thru Fax And Email At The Contact Details Listed Below) Or To The Rizal Avenue Extension, Batangas City And Shall Be Received By The Committee On Or Before 5:00 Pm Of January 10, 2025. E-mail : Procurement.central.external@g.batstate-u.edu.ph 4. The Bsu Reserves The Right To Reject Any Or All Quotations And/or Proposals And Waive Any Formalities/informalities Therein And To Accept Such Bids It May Consider As Most Advantageous To The Agency And To The Government. Batstate U Neither Assumes Any Obligation For Whatsoever Losses That May Be Incurred In The Preparation Of Bids, Nor Does It Guarantee That An Award Will Be Made. Mr. Jonas Erik L Ebora Assistant Director, Procurement Rizal Avenue Extension, Batangas City 980-0385 Loc. 1230

Details: 774.00m² demolition / restoration existing Road and path reinforcements Asphalt / concrete / paving / slabs / sand, gravel / topsoil Open construction 140.00m Twl Pe 100-rc, Sdr 11, 125 x 11.4 mm Delivery and installation 20.00m Twl Pe 100-rc, Sdr 11, 63 x 5.8 mm Delivery and installation Closed construction / tunnelling 450.00m Twl Pe 100-rc, Sdr 11, 125 x 11.4 mm Delivery and installation 290.00m Twl Pe 100-rc, Sdr 11, 63 x 5.8 mm Delivery and installation Cable pulling 60.00m Twl Pe 100-rc, Sdr 11, 63 x 5.85 mm Delivery and installation In Dn 80 Az (1959) 3.00pc Ufh Dn 80 Delivery and installation 1.00pc Flushing hydrant Dn 50 Delivery and installation 2.00pc Gate valve Dn 100 Delivery and installation 1.00pc Gate valve Dn 50 Delivery and installation 16.00pc Ha-production (re-binding)

Details: Description Wireless Conferencing System With Receiver And Intelligent Video Bar The Wireless Conferencing System With Receiver And Intelligent Video Bar Must Be Able To Connect To Different Types Of Devices Like Laptops, Smartphones, And Tablet Devices. The Wireless Presentation And Collaboration Device Must Have The Following Specifications: Communications: • Ethernet: 100/1000 Mbps, Auto-switching, Autonegotiating, Autodiscovery, Full/half Duplex, Tcp/ip, Udp/ip, Dhcp, Ssl, Tls5, Ssh, Sftp (ssh File Transfer Protocol), Ieee 802.1x, Active Directory Authentication, Https Web Browser Setup And Xio Cloud Service, 802.3af Compliant • Wi-fi: Dual-band 802.11a/b/g/n/ac/ax (2.4 Ghz & 5 Ghz); Up To 70 Ft (23 M) Range At 80 Mbps, Subject To Site-specific Conditions. • The Bluetooth® Communications Must At Least Be At Version 5.0 • Usb Host: Usb 2.0 For Connecting A Usb Conferencing Peripheral; Usb 3.0 For Connecting A Usb Conferencing Peripheral • Usb Device: Usb 3.0 For Computer Console (installer Setup And Firmware Update) • Rs-232: 2-way Display Device Control Up To 115.2k Baud With Hardware And Software Handshaking • Ir/serial: 1-way Display Device Control Via Infrared Up To 1.1 Mhz Or Serial Ttl/rs-232 (0-5v) Up To 19.2k Baud • Hdmi Input: Hdcp 1.4, Edid; Supports Management Of Hdcp And Edid • Hdmi Output: Hdcp 2.2, Edid, Cec; Supports Management Of Hdcp And Edid Software: • Os Support: Apple® Ios®, Android™, Windows 10, Windows 11, Macos®, Chrome Os™ • Video Frame Rate: Up To 30 Fps, Audio Supported • Output Resolutions: 640x480@60hz, 800x600@60hz, 1024x768@60hz, 1280x720@50hz (720p50), 1280x720@60hz (720p60), 1280x800@60hz, 1366x768@60hz, 1440x900@60hz, 1600x900@60hz, 1600x1200@60hz, 1680x1050@60hz, 1920x1080@50hz (1080p50), 1920x1080@60hz (1080p60) • Bitrate Peak: 0.25 To 8.5 Mbps, Variable Depending On Content Complexity • Bitrate Average: 1.4 Mbps Typical Audio Format: Stereo Wireless Conferencing: • Os Support (application): Windows 10, Windows 11 • Os Support (connect Adaptor): Windows 10, Windows 11, Macos 11 Or Later • Must Support The Following Conferencing Services: Microsoft Teams Software; Zoom Software • Must At Least Be Compatible With The Following Conferencing Peripheral Brands: All-in-one Systems Kits/soundbars (brands: Logitech, Cisco, Crestron, Owl Bar, Poly Studio, Panasonic, Jabra, Bose, Biamp, Sennheiser, Neat Bar); Microphones/speakerphones/speakers (brands: Jabra, Crestron, Shure, Poly); Cameras (brands: Logitech, Jabra, Aver, Crestron, Huddly, Clearone); Audio Dsps Microphone/speakers (brand: Shure, Biamp, Q-sys); Usb Converters (brands: Dante Avio, Crestron) Video: • Input Signal Types: Hdmi (dvi & Dual-mode Displayport™ Compatible); Simultaneous Display Of Up To Four Sources • Maximum Input Resolutions: Hdmi Input: 1920x1080@60hz (hd 1080p60); • Airmedia Presentation: 1920x1080@30hz (1080p30); Airmedia Connect • Adapter: 3840x2160@30hz (4k30) • Output Signal Types: Hdmi (dvi Compatible) • Hdmi Output Resolutions: 1280x720@50hz (720p50), 1280x720@60hz (720p60), 1280x800@60hz, 1366x768@60hz, 1440x900@60hz, 1600x900@60hz, 1600x1200@60hz, 1680x1050@60hz,1920x1080@50hz (1080p50), 1920x1080@60hz (1080p60), 3840x2160@30hz (2160p30), 3840x2160@50hz (2160p50), 3840x2160@60hz (2160p60) Background & Logo File Support: Jpeg, Png Audio: • Input Signal Types: Hdmi (dual-mode Displayport™ Compatible) • Output Signal Type: Hdmi • Input/output Format: 2 Channel Lpcm Connectors: • Ant-a & Ant-b: (2) Sma Connectors For External Wi-fi Antennas; Wi-fi Antennas Included With 6.56 Ft (2m) Cables • Ir: (1) 2-pin 3.5 Mm Detachable Terminal Block; Ir/serial Output Port For Display Device Control; Ir Output Up To 1.1 Mhz; 1-way Serial Ttl/rs-232 (0-5v) Up To 19200 Baud • Com: (1) 5-pin 3.5 Mm Detachable Terminal Block; Bidirectional Rs-232 Port For Display Device Control; Up To 115.2k Baud, Hardware And Software Handshaking Support • Audio Out: (1) 5-pin 3.5 Mm Detachable Terminal Block; Balanced/unbalanced Stereo Line-level Audio Output; Maximum Output Level: 4 Vrms Balanced, 2 Vrms Unbalanced; Output Impedance: 200 Ohms Balanced, 100 Ohms Unbalanced • Microsd: For Caching Digital Signage Content • Hdmi Input: (1) Hdmi Type A Connector; Hdmi Digital Video/audio Input; (dvi & Dual-mode Displayport Compatible) • Hdmi Output: (1) Hdmi Type A Connector; Hdmi Digital Video/audio Output (dvi Compatible) • Usb: (2) Usb Type A Connectors; Usb 2.0 Host Port For Usb Conferencing Peripheral; Usb 3.0 Host Port For Usb Conferencing Peripheral; (1) Usb Type B Connector; Usb 3.0 Device Port For Computer Console • Lan Poe+: (1) 8-pin Rj-45 Connector; 100base-tx/1000base-t Ethernet Port And Poe+ Class 4 • Lan Aux: (1) 8-pin Rj-45 Connector; 100base-tx/1000base-t Ethernet Port; Connects To A Secondary, Guest-only Network Controls And Indicators: • Power: (1) Green Led, Indicates Operating Power Supplied Via The Local Power Pack Or Poe+ • Reset: (1) Recessed Push Button For Hardware Reset • Setup: (1) Recessed Push Button For Onscreen Ip Address Display And For Pairing The Device To An Am-tx3-100; (1) Red/white Led, Indicates Pairing Status • Online: (1) Green Led, Indicates Control System Connection • Hdmi In/out: (2) Green Leds, Indicate Hdmi Signal Presence At The Hdmi Input/output • Microsd: (1) Microsd Slot • Lan Poe+: (2) Leds, Green Led Indicates Ethernet Link Status, Amber Led Indicates Ethernet Activity • Lan Aux: (2) Leds, Green Led Indicates Ethernet Link Status, Amber Led Indicates Ethernet Activity Compliance: Intertek® Listed For Us & Canada, Ce, Ic, Fcc Part 15 Class B Digital Device The Intelligent Video Bar Must Have The Following Specifications: Speakers: • Woofers: (2) 2 In. (50 Mm) Woofers • Tweeters: (2) 2 X 3/4 In. (50 X 20 Mm) Tweeters • Frequency Response: 80 Hz To 20 Khz Microphones: • Microphone: (8) Microphone Beamforming Array • Pickup Range: Suitable For Rooms Up To 15 X 15 Ft (4.5 X 4.5 M) • Sensitivity: -37 Dbfs • Frequency Response: 100 Hz To 8 Khz Video: • Cameras: (3) Cameras • Resolution: 3840 X 1080 @ 30 Fps; 13 Megapixels • Field Of View: 180º Horizontal, 54º Vertical • Zoom: 6x Lossless Digital Zoom; Automatically Adjusts The Field Of View To Frame All Participants Indicators: • Status Bar: (1) Multicolor Led Indicates Connection Status, In-call Mute/unmute, Room Capacity Status, Remote Control Pairing, And Firmware Update Status Connectors: • Power: (1) Ac Power Connector, Female; For Included Ac Power Pack • Auxin: (1) 3.5 Mm Aux Port; For Future Use • Usb C: (1) Usb-c Connector, Female; Connects To Conferencing System, Room Controller, Or Laptop • Ethernet: (1) Rj-45 Connector, Female; Not Used In Crestron Flex Systems • The Enclosure Must Have The Following Features: Black Speaker And Camera Housing, Rear Air Vents, Integrated Adjustable Mounting Bracket • Can Be Wall Mounted Using Integrated Mounting Bracket; Optional Table Mount Or Vesa® Compliant Screen Mount Software Certification: Microsoft Teams Rooms And Zoom Rooms

Description: Combined Synopsis/solicitation For commercial Products And Services general Information document Type: combined Synopsis/solicitation solicitation Number: 36c24125q0209 posted Date: 1/30/2025 original Response Date: 2/3/2025 current Response Date: 2/3/2025 product Or Service Code: j065 set Aside: sdvosb naics Code: 811210 contracting Office Address network Contracting Office 1 1400 Vfw Parkway west Roxbury Ma 02132 description this Is A Combined Synopsis/solicitation For Commercial Services Prepared In Accordance With The Format In Federal Acquisition Regulation (far) 12.6 As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotations Are Being Requested, And A Written Solicitation Will Not Be Issued. this Solicitation Is A Request For Quotations (rfq). The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular (fac) 2025-03 January 17, 2025. the Associated North American Industrial Classification System (naics) Code For This Procurement Is 811210, With A Small Business Size Standard Of $34m. The Product Or Service Code Is J065. The Government Will Award A Firm-fixed-price (ffp) Contract Resulting From This Combined Synopsis/solicitation To The Responsible Offeror Whose Offer, Conforming To The Synopsis/solicitation, Will Be Most Advantageous To The Government (as Determined By The Solicitation Evaluation Criteria). the Network Contracting Office 1 Is Seeking To Purchase Draeger V500 Overhaul Preventive Maintenance. all Interested Companies Must Provide Quotations For The Following: services draeger V500 Overhaul Pm purpose: this Contract Aims To Provide The On-site Preventive Maintenance Of 20 Draeger V500 Ventilators For The Respiratory Department At The Va West Roxbury. This Is An Overhaul Pm For Each Of The 20 Devices Required After The Fifth Year In Service. background: these Ventilators Are Life Support Devices And Critical For Patient Care. They Assist The Lungs In Working When People Can T Breathe Properly On Their Own. scope: the Contractor Will Perform Overhaul Pm Including Required Tests, Calibrations, And Function Tests Of The Draeger Ipm-l Device Check, Circuit Check, And Performance Checks. parts Replaced In Each Pm: 6 Year Replacement Parts - (o2 Pressure Regulator, spirolog Cable Harness & O2 Inlet Particle Filter), 2 Year Replacement Parts - (nimh internal Battery, Air Inlet Filter & Ps500 Vrla Batteries), & Annual Replacement Parts - (fan Filter & Expiratory Membrane). 20 Ventilators Requiring This Pm Are As Listed By Serial #: Aslh-0049, Aslh-0050, Aslh-0051, Aslh-0052, Aslh-0053, Aslh-0054, Aslh-0055, Aslh-0056, Aslh-0057, Aslh-0058, Aslh-0059, Aslh-0075, Aslh-0076, Aslh-0077, Aslh-0078, Aslh-0079, Aslh-0080, Aslh-0081, Aslh-0082, Aslh-0083 contract Objectives complete Draeger V500 Ventilator Pm S For The Ventilators List Above. complete This Exchange In A Timely Manner So As Not To Disrupt Patient Care Flow Beyond Necessary Limits. deliveries And Performance: service Provided At Clinical Engineering Department 1400 Vfw Parkway, West Roxbury, Ma 02132 quality Assurance batteries Must Hold A Charge For 24 Months. security Requirements: the Contractor Shall Follow All Government Rules And Regulations Regarding Information Security To Prevent Disclosure Of Sensitive Information To Unauthorized Individuals Or Organizations, And Shall Adhere To All Va Privacy & Security, The Privacy Act And Hipaa Requirements When Obtaining And Reviewing Information. a. Applicability this Clause Applies To All Contractors Whose Employees Create, Work With, Or Otherwise Handle Federal Records, As Defined In Section B, Regardless Of The Medium In Which The Record Exists. b. Definitions Federal Record As Defined In 44 U.s.c. § 3301, Includes All Recorded Information, Regardless Of Form Or Characteristics, Made Or Received By A Federal Agency Under Federal Law Or In Connection With The Transaction Of Public Business And Preserved Or Appropriate For Preservation By That Agency Or Its Legitimate Successor As Evidence Of The Organization, Functions, Policies, Decisions, Procedures, Operations, Or Other Activities Of The United States Government Or Because Of The Informational Value Of Data In Them. the Term Federal Record: 1. Includes Vha Records. 2. Does Not Include Personal Materials. 3. Applies To Records Created, Received, Or Maintained By Contractors Pursuant To Their Vha Contract. 4. May Include Deliverables And Documentation Associated With Deliverables. c. Requirements 1. Contractor Shall Comply With All Applicable Records Management Laws And Regulations, As Well As National Archives And Records Administration (nara) Records Policies, Including But Not Limited To The Federal Records Act (44 U.s.c. Chs. 21, 29, 31, 33), Nara Regulations At 36 Cfr Chapter Xii Subchapter B, And Those Policies Associated With The Safeguarding Of Records Covered By The Privacy Act Of 1974 (5 U.s.c. 552a). These Policies Include The Preservation Of All Records, Regardless Of Form Or Characteristics, Mode Of Transmission, Or State Of Completion. 2. In Accordance With 36 Cfr 1222.32, All Data Created For Government Use And Delivered To, Or Falling Under The Legal Control Of, The Government Are Federal Records Subject To The Provisions Of 44 U.s.c. Chapters 21, 29, 31, And 33, The Freedom Of Information Act (foia) (5 U.s.c. 552), As Amended, And The Privacy Act Of 1974 (5 U.s.c. 552a), As Amended And Must Be Managed And Scheduled For Disposition Only As Permitted By Statute Or Regulation. 3. In Accordance With 36 Cfr 1222.32, The Contractor Shall Maintain All Records Created For Government Use Or Created In The Course Of Performing The Contract And/or Delivered To, Or Under The Legal Control Of The Government And Must Be Managed In Accordance With Federal Law. Electronic Records And Associated Metadata Must Be Accompanied By Sufficient Technical Documentation To Permit Understanding And Use Of The Records And Data. 4. Vha And Its Contractors Are Responsible For Preventing The Alienation Or Unauthorized Destruction Of Records, Including All Forms Of Mutilation. Records May Not Be Removed From The Legal Custody Of Vha Or Destroyed Except In Accordance With The Provisions Of The Agency Records Schedules And With The Written Concurrence Of The Head Of The Contracting Activity. Willful And Unlawful Destruction, Damage, Or Alienation Of Federal Records Is Subject To The Fines And Penalties Imposed By 18 U.s.c. 2701. In The Event Of Any Unlawful Or Accidental Removal, Defacing, Alteration, Or Destruction Of Records, The Contractor Must Report To Vha. The Agency Must Report Promptly To Nara In Accordance With 36 Cfr 1230. 5. The Contractor Shall Immediately Notify The Appropriate Contracting Officer Upon Discovery Of Any Inadvertent Or Unauthorized Disclosures Of Information, Data, Documentary Materials, Records, Or Equipment. Disclosure Of Non-public Information Is Limited To Authorized Personnel With A Need-to-know As Described In The [contract Vehicle]. The Contractor Shall Ensure That The Appropriate Personnel, Administrative, Technical, And Physical Safeguards Are Established To Ensure The Security And confidentiality Of This Information, Data, Documentary Material, Records, And/or Equipment Is Properly Protected. The Contractor Shall Not Remove Material From Government Facilities Or Systems, Or Facilities Or Systems Operated Or Maintained On The Government S Behalf, Without The Express Written Permission Of The Head Of The Contracting Activity. When Information, Data, Documentary Material, Records, And/or Equipment Is No Longer Required, It Shall Be Returned To Vha Control Or The Contractor Must Hold It Until Otherwise Directed. Items Returned To The Government Shall Be Hand-carried, Mailed, Emailed, Or Securely Electronically Transmitted To The Contracting Officer Or Address Prescribed In The [contract Vehicle]. Destruction Of Records Is Expressly Prohibited Unless In Accordance With Paragraph (4). 6. The Contractor Is Required To Obtain The Contracting Officer's Approval Prior To Engaging In Any Contractual Relationship (sub-contractor) In Support Of This Contract Requiring The Disclosure Of Information, Documentary Material, And/or Records Generated Under, Or Relating To, Contracts. The Contractor (and Any Sub-contractor) Is Required To Abide By Government And Vha Guidance For Protecting Sensitive, Proprietary Information, Classified, And Controlled Unclassified Information. 7. The Contractor Shall Only Use Government It Equipment For Purposes Specifically Tied To Or Authorized By The Contract And In Accordance With Vha Policy. 8. The Contractor Shall Not Create Or Maintain Any Records Containing Any Non-public Vha Information That Is Not Specifically Tied To Or Authorized By The Contract. 9. The Contractor Shall Not Retain, Use, Sell, Or Disseminate Copies Of Any Deliverable That Contains Information Covered By The Privacy Act Of 1974 Or That Which Is Generally Protected From Public Disclosure By An Exemption To The Freedom Of Information Act. 10. The Vha Owns The Rights To All Data And Records Produced As Part Of This Contract. All Deliverables Under The Contract Are The Property Of The U.s. Government For Which Vha Shall Have Unlimited Rights To Use, Dispose Of, Or Disclose Such Data Contained Therein As It Determines To Be In The Public Interest. Any Contractor Rights In The Data Or Deliverables Must Be Identified As Required By Far 52.227-11 Through Far 52.227-20. 11. Training. All Contractor Employees Assigned To This Contract Who Create, Work With Or Otherwise Handle Records Are Required To Take Vha-provided Records Management Training. The Contractor Is Responsible For Confirming Training Has Been Completed According To Agency Policies, Including Initial Training And Any Annual Or Refresher Training. ** Vha Training For Contractors Is Available In Talent Management System (tms): records Management For Records Officers And Liaisons, Item #3873736 d. Flow Down Of Requirements To Subcontractors 1. The Contractor Shall Incorporate The Substance Of This Clause, Its Terms, And Requirements Including This Paragraph, In All Subcontracts Under This [contract Vehicle], And Require Written Subcontractor Acknowledgment Of Same. 2. Violation By A Subcontractor Of Any Provision Set Forth In This Clause Will Be Attributed To The Contractor. the Period Of Performance Is 2/15/2025 5/15/2025. place Of Performance 1400 Vfw Parkway west Roxbury Ma 02132 award Will Be Made To The Quoter That Offers The Best Value To The Government, Considering Technical Capability, Past Performance, And Price. The Government Will Evaluate Information Based On The Following Evaluation Criteria: 1) Technical Capability Factor Meeting Or Exceeding The Requirement, 2) Past Performance, And 3) Price.â â  the Full Text Of Far Provisions Or Clauses May Be Accessed Electronically At Acquisition.gov. the Following Solicitation Provisions Apply To This Acquisition: far 52.212-1, Instructions To Offerors Commercial Products And Commercial Services Sep 2023 addendum To Far 52.212-1 Instructions To Offerors Commercial Products And Commercial Services Provisions That Are Incorporated By Reference (by Citation Number, Title, And Date), Have The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. The Following Provisions Are Incorporated Into 52.212-1 As An Addendum To This Solicitation: e.2 52.204-24 Representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment (nov 2021) The Offeror Shall Not Complete The Representation At Paragraph (d)(1) Of This Provision If The Offeror Has Represented That It Does Not Provide Covered Telecommunications Equipment Or Services As A Part Of Its Offered Products Or Services To The Government In The Performance Of Any Contract, Subcontract, Or Other Contractual Instrument In Paragraph (c)(1) In The Provision At 52.204 26, Covered Telecommunications Equipment Or Services Representation, Or In Paragraph (v)(2)(i) Of The Provision At 52.212 3, Offeror Representations And Certifications Commercial Products And Commercial Services. The Offeror Shall Not Complete The Representation In Paragraph (d)(2) Of This Provision If The Offeror Has Represented That It Does Not Use Covered Telecommunications Equipment Or Services, Or Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services In Paragraph (c)(2) Of The Provision At 52.204 26, Or In Paragraph (v)(2)(ii) Of The Provision At 52.212 3. (a) Definitions. As Used In This Provision Backhaul, Covered Telecommunications Equipment Or Services, Critical Technology, Interconnection Arrangements, Reasonable Inquiry, Roaming, And Substantial Or Essential Component Have The Meanings Provided In The Clause 52.204 25, Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment. (b) Prohibition. (1) Section 889(a)(1)(a) Of The John S. Mccain National Defense Authorization Act For Fiscal Year 2019 (pub. L. 115 232) Prohibits The Head Of An Executive Agency On Or After August 13, 2019, From Procuring Or Obtaining, Or Extending Or Renewing A Contract To Procure Or Obtain, Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services As A Substantial Or Essential Component Of Any System, Or As Critical Technology As Part Of Any System. Nothing In The Prohibition Shall Be Construed To (i) Prohibit The Head Of An Executive Agency From Procuring With An Entity To Provide A Service That Connects To The Facilities Of A Third-party, Such As Backhaul, Roaming, Or Interconnection Arrangements; Or (ii) Cover Telecommunications Equipment That Cannot Route Or Redirect User Data Traffic Or Cannot Permit Visibility Into Any User Data Or Packets That Such Equipment Transmits Or Otherwise Handles. (2) Section 889(a)(1)(b) Of The John S. Mccain National Defense Authorization Act For Fiscal Year 2019 (pub. L. 115 232) Prohibits The Head Of An Executive Agency On Or After August 13, 2020, From Entering Into A Contract Or Extending Or Renewing A Contract With An Entity That Uses Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services As A Substantial Or Essential Component Of Any System, Or As Critical Technology As Part Of Any System. This Prohibition Applies To The Use Of Covered Telecommunications Equipment Or Services, Regardless Of Whether That Use Is In Performance Of Work Under A Federal Contract. Nothing In The Prohibition Shall Be Construed To (i) Prohibit The Head Of An Executive Agency From Procuring With An Entity To Provide A Service That Connects To The Facilities Of A Third-party, Such As Backhaul, Roaming, Or Interconnection Arrangements; Or (ii) Cover Telecommunications Equipment That Cannot Route Or Redirect User Data Traffic Or Cannot Permit Visibility Into Any User Data Or Packets That Such Equipment Transmits Or Otherwise Handles. (c) Procedures. The Offeror Shall Review The List Of Excluded Parties In The System For Award Management (sam) (https://www.sam.gov) For Entities Excluded From Receiving Federal Awards For Covered Telecommunications Equipment Or Services. (d) Representations. The Offeror Represents That (1) It [ ] Will, [ ] Will Not Provide Covered Telecommunications Equipment Or Services To The Government In The Performance Of Any Contract, Subcontract Or Other Contractual Instrument Resulting From This Solicitation. The Offeror Shall Provide The Additional Disclosure Information Required At Paragraph (e)(1) Of This Section If The Offeror Responds Will In Paragraph (d)(1) Of This Section; And (2) After Conducting A Reasonable Inquiry, For Purposes Of This Representation, The Offeror Represents That It [ ] Does, [ ] Does Not Use Covered Telecommunications Equipment Or Services, Or Use Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services. The Offeror Shall Provide The Additional Disclosure Information Required At Paragraph (e)(2) Of This Section If The Offeror Responds Does In Paragraph (d)(2) Of This Section. (e) Disclosures. (1) Disclosure For The Representation In Paragraph (d)(1) Of This Provision. If The Offeror Has Responded Will In The Representation In Paragraph (d)(1) Of This Provision, The Offeror Shall Provide The Following Information As Part Of The Offer: (i) For Covered Equipment (a) The Entity That Produced The Covered Telecommunications Equipment (include Entity Name, Unique Entity Identifier, Cage Code, And Whether The Entity Was The Original Equipment Manufacturer (oem) Or A Distributor, If Known); (b) A Description Of All Covered Telecommunications Equipment Offered (include Brand; Model Number, Such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); And (c) Explanation Of The Proposed Use Of Covered Telecommunications Equipment And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(1) Of This Provision. (ii) For Covered Services (a) If The Service Is Related To Item Maintenance: A Description Of All Covered Telecommunications Services Offered (include On The Item Being Maintained: Brand; Model Number, Such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); Or (b) If Not Associated With Maintenance, The Product Service Code (psc) Of The Service Being Provided; And Explanation Of The Proposed Use Of Covered Telecommunications Services And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(1) Of This Provision. (2) Disclosure For The Representation In Paragraph (d)(2) Of This Provision. If The Offeror Has Responded Does In The Representation In Paragraph (d)(2) Of This Provision, The Offeror Shall Provide The Following Information As Part Of The Offer: (i) For Covered Equipment (a) The Entity That Produced The Covered Telecommunications Equipment (include Entity Name, Unique Entity Identifier, Cage Code, And Whether The Entity Was The Oem Or A Distributor, If Known); (b) A Description Of All Covered Telecommunications Equipment Offered (include Brand; Model Number, Such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); And (c) Explanation Of The Proposed Use Of Covered Telecommunications Equipment And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(2) Of This Provision. (ii) For Covered Services (a) If The Service Is Related To Item Maintenance: A Description Of All Covered Telecommunications Services Offered (include On The Item Being Maintained: Brand; Model Number, Such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); Or (b) If Not Associated With Maintenance, The Psc Of The Service Being Provided; And Explanation Of The Proposed Use Of Covered Telecommunications Services And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(2) Of This Provision. (end Of Provision) 52.204-29 Federal Acquisition Supply Chain Security Act Orders Representation And Disclosures (dec 2023) (a) Definitions. As Used In This Provision, Covered Article, Fascsa Order, Intelligence Community, National Security System, Reasonable Inquiry, Sensitive Compartmented Information, Sensitive Compartmented Information System, And Source Have The Meaning Provided In The Clause 52.204 30, Federal Acquisition Supply Chain Security Act Orders Prohibition. (b) Prohibition. Contractors Are Prohibited From Providing Or Using As Part Of The Performance Of The Contract Any Covered Article, Or Any Products Or Services Produced Or Provided By A Source, If The Prohibition Is Set Out In An Applicable Federal Acquisition Supply Chain Security Act (fascsa) Order, As Described In Paragraph (b)(1) Of Far 52.204 30, Federal Acquisition Supply Chain Security Act Orders Prohibition. (c) Procedures. (1) The Offeror Shall Search For The Phrase Fascsa Order In The System For Award Management (sam)(https://www.sam.gov) For Any Covered Article, Or Any Products Or Services Produced Or Provided By A Source, If There Is An Applicable Fascsa Order Described In Paragraph (b)(1) Of Far 52.204 30, Federal Acquisition Supply Chain Security Act Orders Prohibition. (2) The Offeror Shall Review The Solicitation For Any Fascsa Orders That Are Not In Sam, But Are Effective And Do Apply To The Solicitation And Resultant Contract (see Far 4.2303(c)(2)). (3) Fascsa Orders Issued After The Date Of Solicitation Do Not Apply Unless Added By An Amendment To The Solicitation. (d) Representation. By Submission Of This Offer, The Offeror Represents That It Has Conducted A Reasonable Inquiry, And That The Offeror Does Not Propose To Provide Or Use In Response To This Solicitation Any Covered Article, Or Any Products Or Services Produced Or Provided By A Source, If The Covered Article Or The Source Is Prohibited By An Applicable Fascsa Order In Effect On The Date The Solicitation Was Issued, Except As Waived By The Solicitation, Or As Disclosed In Paragraph (e). (e) Disclosures. The Purpose For This Disclosure Is So The Government May Decide Whether To Issue A Waiver. For Any Covered Article, Or Any Products Or Services Produced Or Provided By A Source, If The Covered Article Or The Source Is Subject To An Applicable Fascsa Order, And The Offeror Is Unable To Represent Compliance, Then The Offeror Shall Provide The Following Information As Part Of The Offer: (1) Name Of The Product Or Service Provided To The Government; (2) Name Of The Covered Article Or Source Subject To A Fascsa Order; (3) If Applicable, Name Of The Vendor, Including The Commercial And Government Entity Code And Unique Entity Identifier (if Known), That Supplied The Covered Article Or The Product Or Service To The Offeror; (4) Brand; (5) Model Number (original Equipment Manufacturer Number, Manufacturer Part Number, Or Wholesaler Number); (6) Item Description; (7) Reason Why The Applicable Covered Article Or The Product Or Service Is Being Provided Or Used; (f) Executive Agency Review Of Disclosures. The Contracting Officer Will Review Disclosures Provided In Paragraph (e) To Determine If Any Waiver May Be Sought. A Contracting Officer May Choose Not To Pursue A Waiver For Covered Articles Or Sources Otherwise Subject To A Fascsa Order And May Instead Make An Award To An Offeror That Does Not Require A Waiver. (end Of Provision) 52.216-1 Type Of Contract (apr 1984) The Government Contemplates Award Of A Firm-fixed-price, Requirements Contract Resulting From This Solicitation. (end Of Provision) 52.252-1 Solicitation Provisions Incorporated By Reference (feb 1998) This Solicitation Incorporates One Or More Solicitation Provisions By Reference, With The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. The Offeror Is Cautioned That The Listed Provisions May Include Blocks That Must Be Completed By The Offeror And Submitted With Its Quotation Or Offer. In Lieu Of Submitting The Full Text Of Those Provisions, The Offeror May Identify The Provision By Paragraph Identifier And Provide The Appropriate Information With Its Quotation Or Offer. Also, The Full Text Of A Solicitation Provision May Be Accessed Electronically At This/these Address(es): Https://www.acquisition.gov/browse/index/far Https://www.va.gov/oal/library/vaar/ (end Of Provision) far Number title date 52.204-7 system For Award Management nov 2024 52.204-16 commercial And Government Entity Code Reporting aug 2020 52.229-11 tax On Certain Foreign Procurements Notice And Representation jun 2020 852.239-75 information And Communication Technology Accessibility Notice feb 2023 (end Of Addendum To 52.212-1) far 52.212-2, Evaluation Commercial Products And Commercial Services Nov 2021 addendum To 52.212-2 Evaluation Commercial Products And Commercial Services basis For Award. The Government Will Issue A Purchase Order To The Responsible Quoter Whose Quotation Conforming To The Solicitation Will Be Most Advantageous To The Government, Price And Other Factors Considered. the Following Factors Shall Be Used To Evaluate Quotations: technical past Performance price evaluation Approach. The Government Will Evaluate Quotations Using The Comparative Evaluation Process Outlined In Far 13.106-2 (b) (3), Where Quotations Will Be Compared To One Another To Determine Which Provides The Best Benefit To The Government. The Government Reserves The Right To Consider A Quotation Other Than The Lowest Price That Provides Additional Benefit(s). Quotations May Exceed Minimum Requirements Of The Solicitation. The Government Reserves The Right To Select A Quotation That Provides Benefit To The Government That Exceeds The Minimum Requirements Of The Solicitation, But Is Not Required To Do So. Each Response Must Meet The Minimum Requirements Of The Solicitation. The Government Is Not Requesting Or Accepting Alternate Quotations. The Evaluation Will Consider The Following: technical Or Quality: The Quotation Will Be Evaluated To The Extent To Which It Can Meet And/or Exceed The Government S Requirements As Outlined In The Solicitation And Based On The Information Requested In The Instructions To Quoters Section Of The Solicitation. past Performance: The Past Performance Evaluation Will Assess The Relative Risks Associated With A Quoter S Likelihood Of Success In Fulfilling The Solicitation S Requirements As Indicated By The Quoter S Record Of Past Performance. The Past Performance Evaluation May Be Based On The Contracting Officer S Knowledge Of And Previous Experience With The Supply Or Service Being Acquired; Customer Surveys, And Past Performance Questionnaire Replies; Contractor Performance Assessment Reporting System (cpars) At Http://www.cpars.gov/; Or Any Other Reasonable Basis. price: The Government Will Evaluate The Price By Adding The Total Of All Line Item Prices, Including All Options. The Total Evaluated Price Will Be That Sum. (end Of Provision) far 52.212-3, Offeror Representations And Certifications Commercial Products And Commercial Services May 2024 offerors Must Complete Annual Representations And Certifications Online In The System For Award Management (sam) In Accordance With Far 52.212-3. If Paragraph (b)(2) Of The Provision Is Applicable, A Written Submission Is Required. the Following Contract Clauses Apply To This Acquisition: far 52.212-4, Contract Terms And Conditions Commercial Products And Commercial Services Nov 2023 addendum To Far 52.212-4 Contract Terms And Conditions Commercial Products And Commercial Services Clauses That Are Incorporated By Reference (by Citation Number, Title, And Date), Have The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. The Following Clauses Are Incorporated Into 52.212-4 As An Addendum To This Contract: far Number title date 852.232-72 electronic Submission Of Payment Requests nov 2018 vaar 852.242-71 Administrative Contracting Officer (oct 2020) The Contracting Officer Reserves The Right To Designate An Administrative Contracting Officer (aco) For The Purpose Of Performing Certain Tasks/duties In The Administration Of The Contract. Such Designation Will Be In Writing Through An Aco Letter Of Delegation And Will Identify The Responsibilities And Limitations Of The Aco. A Copy Of The Aco Letter Of Delegation Will Be Furnished To The Contractor. (end Of Clause) 52.252-2 Clauses Incorporated By Reference (feb 1998) This Contract Incorporates One Or More Clauses By Reference, With The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. Also, The Full Text Of A Clause May Be Accessed Electronically At This/these Address(es): Https://www.acquisition.gov/browse/index/far Https://www.va.gov/oal/library/vaar/ (end Of Clause) far Number title date 52.203-17 contractor Employee Whistleblower Rights nov 2023 52.204-13 system For Award Management Maintenance oct 2018 52.204-18 commercial And Government Entity Code Maintenance aug 2020 852.203-70 commercial Advertising may 2018 852.215-70 service-disabled Veteran-owned And Veteran-owned Small Business Evaluation Factors (deviation) jan 2023 852.215-71 evaluation Factor Commitments oct 2019 852.246-71 rejected Goods oct 2018 (end Of Addendum To 52.212-4) far 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders Commercial Products And Commercial Services Jan 2025 the Following Subparagraphs Of Far 52.212-5 Are Applicable: (a)(1)-(7), (b)(5), (b)(9), (b)(11)(i), (b)(12), (b)(18), (b)(26), (b)(31), (b)(32), (b)(33), (b)(34), (b)(36), (b)(39), (b)(46), (b)(51), (b)(55), (b)(56), (b)(59), (b)(63), (c)(1), (c)(5), (c)(7), (c)(8), (d)(1)-(3), (e)(1)-(2) all Quotations Must Be Sent To The Point Of Contract Below. this Is An Open-market Combined Synopsis/solicitation For Services As Defined Herein.â the Government Intends To Award A Purchase Order As A Result Of This Combined Synopsis/solicitation That Will Include The Terms And Conditions Set Forth Herein. To Facilitate The Award Process, All Quotes, Must Include A Statement Regarding The Terms And Conditions Herein As Follows: The Terms And Conditions In The Solicitation Are Acceptable To Be Included In The Award Document Without Modification, Deletion, Or Addition. or The Terms And Conditions In The Solicitation Are Acceptable To Be Included In The Award Document With The Exception, Deletion, Or Addition Of The Following: quoter Must List Exception(s) And Rationale For The Exception(s)>. Quotations That Reject The Terms And Conditions Of The Solicitation May Be Excluded From Consideration. submission Must Be Received No Later Than 2/3/2025 At 7:30 Am At Manases.cabrera@va.gov late Submissions Will Be Treated In Accordance With The Solicitation Provision At Far 52.212-1(f). any Questions Or Concerns Regarding This Solicitation Should Be Forwarded In Writing Via E-mail To The Contract Specialist, Manases Cabrera, At Manases.cabrera@va.gov. point Of Contact manases Cabrera, At Manases.cabrera@va.gov.

Details: Sources Sought Notice sources Sought Notice page 4 Of 4 sources Sought Notice *= Required Field sources Sought Notice page 1 Of 4 this Not A Request For Quotes; The Government Is Seeking Information For Market Research Purposes Only. the West Texas Va Health Care System (wtvahcs) Requires Comprehensive Maintenance And Repair Services To Include Hardware /software Support Services, Software Upgrades And Annual Preventive Maintenance/calibration Coverage For The Ge Health Care Case V6.7 Serial Number Ste23140014sa, Muse Nx, And Cardio Day System. The Cardioday Holter System Is Required To Work Seamlessly With Ge Healthcare Muse Nx, Vista, And Ge Healthcare Seer Light Holter Recorders. Server Software Must Be Server Win 2019. Service And Software Agreement Will Cover Software Errors, Technical Support And Clinical Applications Support, Software Updates, And Remote Diagnostics Services. conformance Standards: a. Contractor Shall Ensure That The Equipment Functions In Conformance With The Latest Published Edition Of The Applicable Standards, Such As: Nfpa-99, Ul, Osha, Jcaho, Va, Etc. And The Manufacturer's Performance Standards/ Specifications As Used When The Equipment Was Originally Procured And That Any Upgrades/updates Will Meet Or Exceed The Stated Standards/specifications. b. Contractor Must Comply With The Privacy Act Of 1974 And The Agency Rules And Regulations Issued Under The Act. c. Contractor Must Comply With Health Insurance Portability And Accountability Act Of 1996 (hipaa) And The Agency Rules And Regulations Issued Under The Act Surrounding Access, Protection And Confidentiality Of Personal Health Information And Individually Identifiable Information. hours Of Coverage: a. Contractor Will Provide Technical Telephone Support 24 Hours A Day, 7 Days A Week. Contractor Will Provide A Reasonable Amount Of Clinical Applications Support, Monday Friday, 8:00am To 4:30pm Cst, Excluding Federal Holidays, By Telephone In Response To Inquiries. Contractor Will Make Reasonable Efforts To Respond By Telephone To A Report Of An Error Or Malfunction Within One Hour After Notification By Customer, And Provide On-site Support Within Twenty-four Hours, During Covered Days, Of Notification By Customer. b. Contractor Will Provide Planned Maintenance For The Hardware In Accordance With Ge Healthcare And Oem Recommended Frequencies And Hardware Specifications As Set Forth In The Ge Healthcare Service Manuals. All Inspections Will Be Scheduled At A Mutually Agreeable Time Between Mondays - Fridays, 8:00am-4:30pm Local Site Time. c. Cor Or Designated Alternate Shall Provide Reasonable Access To The Equipment, Reasonable Working Space, And A Reasonable Safe, Hazard-free Operating Environment For Contractor S Employees And Representatives Providing Services Hereunder During Hours Of Coverage. d. Federal Holidays Observed By The Wtvahcs Are: New Years' Day Labor Day Martin Luther King Day Columbus Day Presidents' Day Veterans' Day Memorial Day Thanksgiving Day Juneteenth Day Christmas Day Independence Day unscheduled Maintenance (repair Service): a. Contractor Shall Maintain The Equipment In Accordance With Manufacturer S Guidance With An Onsite Response Time Within 24 Hours For Repairs (next Business Day). Contractor Shall Make Reasonable Efforts For Fse To Respond By Telephone Within One (1) Hour After Notification Of A Malfunction. The Co Or Cor Has The Authority To Approve/request A Service Call From The Contractor. b. Coverage Includes On-site Support, Service Parts, Software, And Labor. c. Contractor Will Provide Telephone Support Per Section C, Iv, Hours Of Coverage. d. When The Contractor Leaves On-site Location Where Maintenance Services Are Being Performed, The Site Shall Be Left In A Clean, Neat, And Orderly Condition Ensuring The Hospital/clinic Staff And Patients Are Not Subjected To Any Safety Hazards, Including But Not Limited To Expose Wiring, Open Circuit Panels, Or Tripping Hazards. e. The Cor Will Be Informed Personally Or In Writing Of The Equipment Status Prior To The Contractor Leaving The Work Site. f. The Contractor Is Not Responsible For The Maintenance Of Equipment Listed When Damage Resulted From Act Of God Or When Services From Other Than The Contractor S Personnel Have Been Performed. The Contractor Is Not Responsible For The Maintenance Of Equipment Listed When Damage Results From Government Neglect, Misuse, Abuse, Unauthorized Attachments, Or Alterations To Factory Settings Of The Unit. scheduled Maintenance: a. The Contractor Shall Perform Pm Services To Ensure That Equipment Listed In The Schedule Performs In Accordance With Section C, Iii, Conformance Standards. Such Maintenance Will Be Performed At Mutually Agreed Times During Pm Coverage Hours. All Exceptions To The Pm Schedule Shall Be Arranged And Approved In Advance With The Cor. b. The Contractor Shall Provide And Utilize Procedures And Checklists With Worksheet Originals Indicating Work Performed And Actual Values Obtained (as Applicable). Any Charges For Parts, Services, Manuals, Tools, Or Software Required To Successfully Complete Scheduled Pm Are Included Within This Contract, Unless Specifically Stated In Writing. c. The Contractor Shall Provide Written Description Of Preventive Maintenance Inspections (pmi). This Description Shall Include An Itemized List Of The Procedures Performed. Pm Services Shall Include, But Need Not Be Limited To, The Following: 1. Cleaning Of Equipment. 2. Calibrating And Lubricating The Equipment. 3. Performing Remedial Maintenance Of Non-emergent Nature. 4. Testing And Replacing Faulty And Worn Parts And/or Parts Likely To Become Faulty, Fail Or Become Worn. 5. Inspecting And Replacing Where Indicated, Electrical Wiring And Cables For Wear And Fraying. 6. Inspecting And Replacing, Where Indicated, All Mechanical Components. 7. Returning The Equipment To The Operating Condition. 8. Providing Documentation Of Services Performed. parts: a. The Contractor Has Ready Access, No More Than Three (3) Business Days, To All Parts, Including Unique And/or High Mortality Replacement Parts. The Contract Shall Include All Parts Except, If Applicable, Those Parts Specifically Listed As Being Excluded. The Contractor Shall Use New Or Rebuilt Parts Which Meet Or Exceed Oem Standards For Equivalent Quality And Reliability As A New Part. Used Parts Or Those Removed From Another System Shall Not Be Installed Without Specific Approval By The Co Or The Cor. b. The Contractor Shall Not Modify The System To Facilitate Replacement Parts That Are Not Identical To The Part Being Replaced Unless Such Modification Was Developed, Approved And Released By The Oem. c. The Following Items Are Excluded From Coverage: User-replaceable Expendable Parts/supplies And Parts Replaced For Cosmetic Reasons. The Contractor Shall Also List Any Additional Excluded Parts Under The Service Contract. d. Any Hardware, Such As A Hard Drive, Which Contained Patient Information, Must Be Sanitized In Accordance With National Security Agency Standards By Wtvahcs Staff Prior To Being Removed From The Wtvahcs. service Manuals/tools/equipment: a. The Wtvahcs Shall Not Provide Tools, (test) Equipment, Service Manuals, Or Service Diagnostic Software To The Contractor. Contractor Shall Obtain, Have On File, And Make Available To Its Fse All Operational And Technical Documentation (such As Operational And Service Manuals, Schematics, And Parts List) Which Are Necessary To Meet The Performance Requirements Of This Contract. b. Contractor Shall Provide The Cor Two (2) Copies Of All Documentation That Pertains To Any Hardware, Software, Or Firmware Upgrade Or Repair. documentation/reports: the Documentation Shall Include Detailed Descriptions Of The Maintenance Procedures Performed, Including Replaced Parts. In Addition, Each Esr Must, At A Minimum, Document The Following Data Legibly And In Complete Detail: A. Name Of Contractor And Contract Number. B. Name Of Fse Who Performed Services. C. Contractor Service Esr Number/log Number. D. Description Of Problem Reported By Cor. E. Identification Of Equipment Serviced. F. Itemized Description Of Service Performed, With Parts And Part Numbers. G. Itemized Costs Of Any Approved Billable Parts And Services, If Applicable. reporting Requirements: The Contractor Shall Report His Arrival In Person Or By Telephone To Biomedical Engineering. When The Service Is Completed, The Fse Shall Document Services Rendered On A Legible Esr(s). The Fse Shall Check Out With Biomedical Engineering And Submit The Esr(s) To The Cor. If The Cor Is Unavailable, A Copy Of The Esr Will Be Sent To The Cor After The Work For Review. the North American Industry Classification System (naics) Is 811210 Electronic And Precision Equipment Repair And Maintenance, Service Code (psc) Is J065 - Maintenance, Repair, And Rebuilding Of Equipment Medical, Dental, And Veterinary Equipment And Supplies. The Full-service Contract Will Cover One (1) Base Year And 4 Option Years With A Start Date On Or About May 1, 2025 Through April 30, 2026. responses To This Notice Shall Include Company/individual Name, Size Status For The Above Reference Naics Code, A Service Capability Statement, Sam Entity Unique Identifier (eui), Duns Number, Address, Point Of Contact And Examples Of Similar Facilities To Which Similar Services Have Been Provided To. Contractors Should Provide Information On Whether They Are Certified Sdvosb, Vosb, Hub Zone, 8(a), Women-owned Concern. If Standard Company Brochures Will Be Provided As A Response To This Source Sought, Ensure That Additional Information Tailored To This Notice Is Included. If You Are In Gsa, Please Provide Schedule And Contract Number. a Solicitation Is Not Currently Available. If A Solicitation Is Issued, It Will Be Announced On The Contract Opportunities Website Https://sam.gov At A Later Date, And All Interested Parties Must Respond To That Solicitation Announcement Separately From The Response To This Announcement. Contractors Must Be Registered In System For Award Management (sam), See Internet Site: Https://www.sam.gov For Information About Registration. responses To This Notice Must Be Submitted Via Email To Anitra.carter@va.gov No Later Than January 10, 2025 At 10:00 Am Ct. No Telephone Inquiries Will Be Accepted. disclaimer this Rfi Is Issued Solely For Information And Planning Purposes Only And Does Not Constitute A Solicitation. All Information Received In Response To This Rfi That Is Marked As Proprietary Will Be Handled Accordingly. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Associated With Responding To This Rfi.