Cable Tenders

Details: This Is A Request For Information (rfi) Only. There Is No Solicitation Package Available. the Naval Air Warfare Center, Aircraft Division (nawcad) Lakehurst, Nj Is Issuing This Request For Information Notice To Conduct Market Research To Identify Potential Sources And Request Information For A Potential Procurement Of Rack Mounted Analog Discrete Input Measurement Instruments For The Engine Test Instrumentation Replacement System (etirs). The Instrumentation Must Meet Various Functions, And Each Instrument Can Fulfill One Or Multiple Functional Requirements. this Is A Request For Information Only – Not A Request For Proposal. This Rfi Is Issued For The Purpose Of Determining Market Interest, Feasibility, And Capability Of Sources And Does Not Constitute A Request For Proposal Or Commitment By The Government. this Rfi Is Issued Sole For The Market Research Information And Planning Purposes And Does Not Constitute A Solicitation.  information Herein Is Based On The Best Information Available At The Time Of Publication, Is Subject To Revision, And Is Not Binding Upon The Government.  no Reimbursement Will Be Made Of Any Costs To Provide Information In Response To This Rfi Or Any Follow-up Information Requests. this Rfi Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Meeting The Requirements Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract.  navair Is Requesting Information On The Industry’s Capability Of Manufacturing Commercial Off The Shelf (cots) Or Modified Cots (mcots) Rack Mounted Analog Thermocouple Measurement Instruments That Meet Or Exceed The Requirements Below. the Rack Mounted Analog Thermocouple Measurement Instruments Shall Meet Or Exceed The Performance/environmental Requirements Shown In The Following Functional Breakdown: instrumentation Performance Requirements analog Thermocouple Measurement Performance Requirements ** Refer To The Tables In The Attached Instrumentation Characteristics Excel File For All Performance Requirements. The Performance Specification Is Export-controlled. In Order To Receive A Copy Of The Performance Specification Interested Respondents Must Be U. S. Dod Contractors. Interested Respondents Must Provide The Contracting Office Point Of Contact Identified Below With A Copy Of Their Current, Approved Form Dd2345, 'militarily Critical Technical Data Agreement'. Once Received And Current Jcp Certification Verified By Navair, The Draft Performance Specification Will Be Transmitted To You From Navair Via The Dod Safe System, To The Data Custodian You Have Identified On The Dd Form 2345. Contractors Must Request The Draft Performance Specification In Writing From Mr. Paras Patel, Paras.d.patel.civ@us.navy.mil. acquisition Instrumentation Environmental Requirements the System’s Equipment Design, Located Outside The Instrument And Control Room (i&c Cab), Shall Meet Class 1 Environmental Requirements As Defined In Table 2 Of Mil-prf-28800. the System’s Equipment, Within The Instrument And Control Room (i&c Cab) Boundary, Design Shall Meet The Temperature And Humidity Requirements Of Class 4 Equipment In Section 3.9.2 Of Mil-prf-28800. the System Shall Be Fully Operational During The Expected Shipboard Deck Environmental Vibration Levels As Described Per Mil-std-167-1a, Type 1 - Environmental Vibration. the System’s Equipment Design Shall Comply With The Requirement Matrix For Navy Surface Ships And Navy Ground In Table 5 Of Mil-std-461 Or Equivalent. cs115 (conducted Susceptibility, Bulk Cable Injection, Impulse Excitation) And Cs118 (personnel Borne Electrostatic Discharge) Are Specified As Applicable. navair Is Requesting The Following Information From Industry Vendors To Demonstrate How They Can Meet The Requirements Listed Above: vendor Capability. vendor Capacity. documentation Demonstrating That The Vendor Is Capable Of Manufacturing Cots And/or Modified Cots Rack Mounted Analog Thermocouple Measurement Instruments. Documentation Demonstrating That The Vendor Is Capable To Sustain The Product. any Information On Past Performance Of Similar Efforts. a Technical Data Sheet Describing The Electrical And Performance Characteristics Of The Instruments. the Vendors May Also Respond With A Presentation Of 5 Slides Or Less With A Specific Focus On Explanation Of Data Sheets And Instrument Performance In Relation To Gfi Requirements. navair Is Requesting The Following Information From Industry Vendors To Comprehend The Logistics Impacts Associated To Each Instrument: how Long Will The Product Be Supported For Procurement And Repair? does The Product Require Calibration? if So, Does The Product Require Additional Equipment/tools To Calibrate? all Interested Parties Should Have The Following: a Quality Assurance Program Compliant With Iso9001 Or Equivalent. test Data Demonstrating That The Above Performance And Environmental Requirements Have Been Met With The Proposed Rack Mounted Analog Thermocouple Measurement Instruments. acquisition Instrumentation Software Requirements instrumentation Shall Be Able To Be Controlled Through An Application Programming Interface (api) By Software Code Running On The Test Bench. Navair’s Preferred Apis Are Those Standardized Interfaces Defined And Managed By The Interchangeable Virtual Instrument (ivi) Foundation (https://www.ivifoundation.org) Including The Following: vxi Plug & Play standard Commands For Programmable Instrumentation (scpi) virtual Instrument Software Architecture (visa) interchangeable Virtual Instrument (ivi) all Interested Parties Should Respond With Their Compliance With The Above Apis For Each Potential Offering. If A Vendor’s Instrument Is Not Compliant With The Above Apis, They Should State So And, Instead, Provide An Overview Of How To Programmatically Control Their Instrument, Including Any Required Drivers, Applications, Programming Languages, Operating Systems, Or Third-party Tools. in Addition To Expressing Interest And Providing The Requested Information, Include Estimated Price Details. The Government Is Seeking Unit Price And Lead Time For Each Type Of Rack Mounted Data Acquisition Instrument Type. Brochures, Manufacturing Capability And Capacity, And Past Performance Information May Be Included In The Rfi Response. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics Code Assigned To This Notice. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In This Rfi In Order To Assist The Government’s Capability Determination.  far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance.  Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far).   interested Sources Should Provide Rfi Responses And Related Data To The Pocs Identified Below, No Later Than 30 Days After The Post Date Of This Rfi. All Information Sent Should Reference This Rfi Number On The Subject Response Line Of The Emailed Response As Well As On All Enclosed Documents. Responses Must Include The Company Name, Address, Point Of Contact Name And Email/phone, And Company Size. Proprietary Data Must Be Marked On A Page-by-page Basis And Will Be Kept Confidential And Protected Where So Designated. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Rfp That May Be Issued. Any Comments Provided May Or May Not Be Included In A Formal Solicitation. Respondents May Provide Information And Rough Orders Of Magnitude (rom) On Any Currently Available Product Or A Company's' Capabilities That Will Meet The Navy's Requirements. responses Must Be Received No Later Than December 16th 2024 By 4pm Est.

Details: This Is A Request For Information (rfi) Only. There Is No Solicitation Package Available. the Naval Air Warfare Center, Aircraft Division (nawcad) Lakehurst, Nj Is Issuing This Request For Information Notice To Conduct Market Research To Identify Potential Sources And Request Information For A Potential Procurement Of Rack Mounted Analog Discrete Input Measurement Instruments For The Engine Test Instrumentation Replacement System (etirs). The Instrumentation Must Meet Various Functions, And Each Instrument Can Fulfill One Or Multiple Functional Requirements. this Is A Request For Information Only – Not A Request For Proposal. This Rfi Is Issued For The Purpose Of Determining Market Interest, Feasibility, And Capability Of Sources And Does Not Constitute A Request For Proposal Or Commitment By The Government. this Rfi Is Issued Sole For The Market Research Information And Planning Purposes And Does Not Constitute A Solicitation.  information Herein Is Based On The Best Information Available At The Time Of Publication, Is Subject To Revision, And Is Not Binding Upon The Government.  no Reimbursement Will Be Made Of Any Costs To Provide Information In Response To This Rfi Or Any Follow-up Information Requests. this Rfi Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Meeting The Requirements Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract.  navair Is Requesting Information On The Industry’s Capability Of Manufacturing Commercial Off The Shelf (cots) Or Modified Cots (mcots) Rack Mounted Analog Vibration Measurement Instruments That Meet Or Exceed The Requirements Below. the Rack Mounted Analog Vibration Measurement Instruments Shall Meet Or Exceed The Performance/environmental Requirements Shown In The Following Functional Breakdown: instrumentation Performance Requirements analog Vibration Measurement Performance Requirements ** Refer To The Tables In The Attached Instrumentation Characteristics Excel File For All Performance Requirements. The Performance Specification Is Export-controlled. In Order To Receive A Copy Of The Performance Specification Interested Respondents Must Be U. S. Dod Contractors. Interested Respondents Must Provide The Contracting Office Point Of Contact Identified Below With A Copy Of Their Current, Approved Form Dd2345, 'militarily Critical Technical Data Agreement'. Once Received And Current Jcp Certification Verified By Navair, The Draft Performance Specification Will Be Transmitted To You From Navair Via The Dod Safe System, To The Data Custodian You Have Identified On The Dd Form 2345. Contractors Must Request The Draft Performance Specification In Writing From Mr. Justin Panecki, Justin.p.panecki2.civ@us.navy.mil. acquisition Instrumentation Environmental Requirements the System’s Equipment Design, Located Outside The Instrument And Control Room (i&c Cab), Shall Meet Class 1 Environmental Requirements As Defined In Table 2 Of Mil-prf-28800. the System’s Equipment, Within The Instrument And Control Room (i&c Cab) Boundary, Design Shall Meet The Temperature And Humidity Requirements Of Class 4 Equipment In Section 3.9.2 Of Mil-prf-28800. the System Shall Be Fully Operational During The Expected Shipboard Deck Environmental Vibration Levels As Described Per Mil-std-167-1a, Type 1 - Environmental Vibration. the System’s Equipment Design Shall Comply With The Requirement Matrix For Navy Surface Ships And Navy Ground In Table 5 Of Mil-std-461 Or Equivalent. cs115 (conducted Susceptibility, Bulk Cable Injection, Impulse Excitation) And Cs118 (personnel Borne Electrostatic Discharge) Are Specified As Applicable. navair Is Requesting The Following Information From Industry Vendors To Demonstrate How They Can Meet The Requirements Listed Above: vendor Capability. vendor Capacity. documentation Demonstrating That The Vendor Is Capable Of Manufacturing Cots And/or Modified Cots Rack Mounted Instruments. Documentation Demonstrating That The Vendor Is Capable To Sustain The Product. any Information On Past Performance Of Similar Efforts. a Technical Data Sheet Describing The Electrical And Performance Characteristics Of The Instruments. the Vendors May Also Respond With A Presentation Of 5 Slides Or Less With A Specific Focus On Explanation Of Data Sheets And Instrument Performance In Relation To Gfi Requirements. navair Is Requesting The Following Information From Industry Vendors To Comprehend The Logistics Impacts Associated To Each Instrument: how Long Will The Product Be Supported For Procurement And Repair? does The Product Require Calibration? if So, Does The Product Require Additional Equipment/tools To Calibrate? all Interested Parties Should Have The Following: a Quality Assurance Program Compliant With Iso9001 Or Equivalent. test Data Demonstrating That The Above Performance And Environmental Requirements Have Been Met With The Proposed Rack Mounted Analog Vibration Measurement Instruments. acquisition Instrumentation Software Requirements instrumentation Shall Be Able To Be Controlled Through An Application Programming Interface (api) By Software Code Running On The Test Bench. Navair’s Preferred Apis Are Those Standardized Interfaces Defined And Managed By The Interchangeable Virtual Instrument (ivi) Foundation (https://www.ivifoundation.org) Including The Following: vxi Plug & Play standard Commands For Programmable Instrumentation (scpi) virtual Instrument Software Architecture (visa) interchangeable Virtual Instrument (ivi) all Interested Parties Should Respond With Their Compliance With The Above Apis For Each Potential Offering. If A Vendor’s Instrument Is Not Compliant With The Above Apis, They Should State So And, Instead, Provide An Overview Of How To Programmatically Control Their Instrument, Including Any Required Drivers, Applications, Programming Languages, Operating Systems, Or Third-party Tools. in Addition To Expressing Interest And Providing The Requested Information, Include Estimated Price Details. The Government Is Seeking Unit Price And Lead Time For Each Type Of Rack Mounted Data Acquisition Instrument Type. Brochures, Manufacturing Capability And Capacity, And Past Performance Information May Be Included In The Rfi Response. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics Code Assigned To This Notice. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In This Rfi In Order To Assist The Government’s Capability Determination.  far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance.  Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far).   interested Sources Should Provide Rfi Responses And Related Data To The Pocs Identified Below, No Later Than 30 Days After The Post Date Of This Rfi. All Information Sent Should Reference This Rfi Number On The Subject Response Line Of The Emailed Response As Well As On All Enclosed Documents. Responses Must Include The Company Name, Address, Point Of Contact Name And Email/phone, And Company Size. Proprietary Data Must Be Marked On A Page-by-page Basis And Will Be Kept Confidential And Protected Where So Designated. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Rfp That May Be Issued. Any Comments Provided May Or May Not Be Included In A Formal Solicitation. Respondents May Provide Information And Rough Orders Of Magnitude (rom) On Any Currently Available Product Or A Company's' Capabilities That Will Meet The Navy's Requirements. responses Must Be Received No Later Than December 16th 2024 By 4pm Est.

Details: This Is A Request For Information (rfi) Only. There Is No Solicitation Package Available. the Naval Air Warfare Center, Aircraft Division (nawcad) Lakehurst, Nj Is Issuing This Request For Information Notice To Conduct Market Research To Identify Potential Sources And Request Information For A Potential Procurement Of Rack Mounted Analog Discrete Input Measurement Instruments For The Engine Test Instrumentation Replacement System (etirs). The Instrumentation Must Meet Various Functions, And Each Instrument Can Fulfill One Or Multiple Functional Requirements. this Is A Request For Information Only – Not A Request For Proposal. This Rfi Is Issued For The Purpose Of Determining Market Interest, Feasibility, And Capability Of Sources And Does Not Constitute A Request For Proposal Or Commitment By The Government. this Rfi Is Issued Sole For The Market Research Information And Planning Purposes And Does Not Constitute A Solicitation.  information Herein Is Based On The Best Information Available At The Time Of Publication, Is Subject To Revision, And Is Not Binding Upon The Government.  no Reimbursement Will Be Made Of Any Costs To Provide Information In Response To This Rfi Or Any Follow-up Information Requests. this Rfi Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Meeting The Requirements Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract.  navair Is Requesting Information On The Industry’s Capability Of Manufacturing Commercial Off The Shelf (cots) Or Modified Cots (mcots) Rack Mounted Analog Discrete Input Measurement Instruments That Meet Or Exceed The Requirements Below. the Rack Mounted Analog Discrete Input Measurement Instruments Shall Meet Or Exceed The Performance/environmental Requirements Shown In The Following Functional Breakdown: instrumentation Performance Requirements analog Discrete Input Measurement Performance Requirements ** Refer To The Tables In The Attached Instrumentation Characteristics Excel File For All Draft Performance Requirements. The Performance Specification Is Export-controlled. In Order To Receive A Copy Of The Performance Specification Interested Respondents Must Be U. S. Dod Contractors. Interested Respondents Must Provide The Contracting Office Point Of Contact Identified Below With A Copy Of Their Current, Approved Form Dd2345, 'militarily Critical Technical Data Agreement'. Once Received And Current Jcp Certification Verified By Navair, The Draft Performance Specification Will Be Transmitted To You From Navair Via The Dod Safe System, To The Data Custodian You Have Identified On The Dd Form 2345. Contractors Must Request The Draft Performance Specification In Writing From Mr. Paras Patel, Paras.d.patel.civ@us.navy.mil. acquisition Instrumentation Environmental Requirements the System’s Equipment Design, Located Outside The Instrument And Control Room (i&c Cab), Shall Meet Class 1 Environmental Requirements As Defined In Table 2 Of Mil-prf-28800. the System’s Equipment, Within The Instrument And Control Room (i&c Cab) Boundary, Design Shall Meet The Temperature And Humidity Requirements Of Class 4 Equipment In Section 3.9.2 Of Mil-prf-28800. the System Shall Be Fully Operational During The Expected Shipboard Deck Environmental Vibration Levels As Described Per Mil-std-167-1a, Type 1 - Environmental Vibration. the System’s Equipment Design Shall Comply With The Requirement Matrix For Navy Surface Ships And Navy Ground In Table 5 Of Mil-std-461 Or Equivalent. cs115 (conducted Susceptibility, Bulk Cable Injection, Impulse Excitation) And Cs118 (personnel Borne Electrostatic Discharge) Are Specified As Applicable. navair Is Requesting The Following Information From Industry Vendors To Demonstrate How They Can Meet The Requirements Listed Above: vendor Capability. vendor Capacity. documentation Demonstrating That The Vendor Is Capable Of Manufacturing Cots And/or Modified Cots Rack Mounted Instruments. Documentation Demonstrating That The Vendor Is Capable To Sustain The Product. any Information On Past Performance Of Similar Efforts. a Technical Data Sheet Describing The Electrical And Performance Characteristics Of The Instruments. the Vendors May Also Respond With A Presentation Of 5 Slides Or Less With A Specific Focus On Explanation Of Data Sheets And Instrument Performance In Relation To Gfi Requirements. navair Is Requesting The Following Information From Industry Vendors To Comprehend The Logistics Impacts Associated To Each Instrument: how Long Will The Product Be Supported For Procurement And Repair? does The Product Require Calibration? if So, Does The Product Require Additional Equipment/tools To Calibrate? all Interested Parties Should Have The Following: a Quality Assurance Program Compliant With Iso9001 Or Equivalent. test Data Demonstrating That The Above Performance And Environmental Requirements Have Been Met With The Proposed Rack Mounted Analog Discrete Input Measurement Instruments. acquisition Instrumentation Software Requirements instrumentation Shall Be Able To Be Controlled Through An Application Programming Interface (api) By Software Code Running On The Test Bench. Navair’s Preferred Apis Are Those Standardized Interfaces Defined And Managed By The Interchangeable Virtual Instrument (ivi) Foundation (https://www.ivifoundation.org) Including The Following: vxi Plug & Play standard Commands For Programmable Instrumentation (scpi) virtual Instrument Software Architecture (visa) interchangeable Virtual Instrument (ivi) all Interested Parties Should Respond With Their Compliance With The Above Apis For Each Potential Offering. If A Vendor’s Instrument Is Not Compliant With The Above Apis, They Should State So And, Instead, Provide An Overview Of How To Programmatically Control Their Instrument, Including Any Required Drivers, Applications, Programming Languages, Operating Systems, Or Third-party Tools. in Addition To Expressing Interest And Providing The Requested Information, Include Estimated Price Details. The Government Is Seeking Unit Price And Lead Time For Each Type Of Rack Mounted Data Acquisition Instrument Type. Brochures, Manufacturing Capability And Capacity, And Past Performance Information May Be Included In The Rfi Response. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics Code Assigned To This Notice. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In This Rfi In Order To Assist The Government’s Capability Determination.  far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance.  Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far).   interested Sources Should Provide Responses To This Rfi And Related Data To The Pocs Identified Below, No Later Than 30 Days After The Post Date Of This Rfi. All Information Sent Should Reference This Rfi Number On The Subject Response Line Of The Emailed Response As Well As On All Enclosed Documents. Responses Must Include The Company Name, Address, Point Of Contact Name And Email/phone, And Company Size. Proprietary Data Must Be Marked On A Page-by-page Basis And Will Be Kept Confidential And Protected Where So Designated. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Rfp That May Be Issued. Any Comments Provided May Or May Not Be Included In A Formal Solicitation. Respondents May Provide Information And Rough Orders Of Magnitude (rom) On Any Currently Available Product Or A Company's' Capabilities That Will Meet The Navy's Requirements. responses Must Be Received No Later Than December 16th By 4pm Est.

Details: This Is A Request For Information (rfi) Only. There Is No Solicitation Package Available. the Naval Air Warfare Center, Aircraft Division (nawcad) Lakehurst, Nj Is Issuing This Request For Information Notice To Conduct Market Research To Identify Potential Sources And Request Information For A Potential Procurement Of Rack Mounted Analog Discrete Input Measurement Instruments For The Engine Test Instrumentation Replacement System (etirs). The Instrumentation Must Meet Various Functions, And Each Instrument Can Fulfill One Or Multiple Functional Requirements. this Is A Request For Information Only – Not A Request For Proposal. This Rfi Is Issued For The Purpose Of Determining Market Interest, Feasibility, And Capability Of Sources And Does Not Constitute A Request For Proposal Or Commitment By The Government. this Rfi Is Issued Sole For The Market Research Information And Planning Purposes And Does Not Constitute A Solicitation.  information Herein Is Based On The Best Information Available At The Time Of Publication, Is Subject To Revision, And Is Not Binding Upon The Government.  no Reimbursement Will Be Made Of Any Costs To Provide Information In Response To This Rfi Or Any Follow-up Information Requests. this Rfi Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Meeting The Requirements Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract.  navair Is Requesting Information On The Industry’s Capability Of Manufacturing Commercial Off The Shelf (cots) Or Modified Cots (mcots) Rack Mounted Analog Tachometer Frequency Measurement Instruments That Meet Or Exceed The Requirements Below. the Rack Mounted Analog Tachometer Frequency Measurement Instruments Shall Meet Or Exceed The Performance/environmental Requirements Shown In The Following Functional Breakdown: instrumentation Performance Requirements analog Tachometer Frequency Measurement Performance Requirements ** Refer To The Tables In The Attached Instrumentation Characteristics Excel File For All Performance Requirements. The Performance Specification Is Export-controlled. In Order To Receive A Copy Of The Performance Specification Interested Respondents Must Be U. S. Dod Contractors. Interested Respondents Must Provide The Contracting Office Point Of Contact Identified Below With A Copy Of Their Current, Approved Form Dd2345, 'militarily Critical Technical Data Agreement'. Once Received And Current Jcp Certification Verified By Navair, The Draft Performance Specification Will Be Transmitted To You From Navair Via The Dod Safe System, To The Data Custodian You Have Identified On The Dd Form 2345. Contractors Must Request The Draft Performance Specification In Writing From Mr. Paras Patel, Paras.d.patel.civ@us.navy.mil. acquisition Instrumentation Environmental Requirements the System’s Equipment Design, Located Outside The Instrument And Control Room (i&c Cab), Shall Meet Class 1 Environmental Requirements As Defined In Table 2 Of Mil-prf-28800. the System’s Equipment, Within The Instrument And Control Room (i&c Cab) Boundary, Design Shall Meet The Temperature And Humidity Requirements Of Class 4 Equipment In Section 3.9.2 Of Mil-prf-28800. the System Shall Be Fully Operational During The Expected Shipboard Deck Environmental Vibration Levels As Described Per Mil-std-167-1a, Type 1 - Environmental Vibration. the System’s Equipment Design Shall Comply With The Requirement Matrix For Navy Surface Ships And Navy Ground In Table 5 Of Mil-std-461 Or Equivalent. cs115 (conducted Susceptibility, Bulk Cable Injection, Impulse Excitation) And Cs118 (personnel Borne Electrostatic Discharge) Are Specified As Applicable. navair Is Requesting The Following Information From Industry Vendors To Demonstrate How They Can Meet The Requirements Listed Above: vendor Capability. vendor Capacity. documentation Demonstrating That The Vendor Is Capable Of Manufacturing Cots And/or Modified Cots Rack Mounted Instruments. Documentation Demonstrating That The Vendor Is Capable To Sustain The Product. any Information On Past Performance Of Similar Efforts. a Technical Data Sheet Describing The Electrical And Performance Characteristics Of The Instruments. the Vendors May Also Respond With A Presentation Of 5 Slides Or Less With A Specific Focus On Explanation Of Data Sheets And Instrument Performance In Relation To Gfi Requirements. navair Is Requesting The Following Information From Industry Vendors To Comprehend The Logistics Impacts Associated To Each Instrument: how Long Will The Product Be Supported For Procurement And Repair? does The Product Require Calibration? if So, Does The Product Require Additional Equipment/tools To Calibrate? all Interested Parties Should Have The Following: a Quality Assurance Program Compliant With Iso9001 Or Equivalent. test Data Demonstrating That The Above Performance And Environmental Requirements Have Been Met With The Proposed Rack Mounted Analog Tachometer Frequency Measurement Instruments. acquisition Instrumentation Software Requirements instrumentation Shall Be Able To Be Controlled Through An Application Programming Interface (api) By Software Code Running On The Test Bench. Navair’s Preferred Apis Are Those Standardized Interfaces Defined And Managed By The Interchangeable Virtual Instrument (ivi) Foundation (https://www.ivifoundation.org) Including The Following: vxi Plug & Play standard Commands For Programmable Instrumentation (scpi) virtual Instrument Software Architecture (visa) interchangeable Virtual Instrument (ivi) all Interested Parties Should Respond With Their Compliance With The Above Apis For Each Potential Offering. If A Vendor’s Instrument Is Not Compliant With The Above Apis, They Should State So And, Instead, Provide An Overview Of How To Programmatically Control Their Instrument, Including Any Required Drivers, Applications, Programming Languages, Operating Systems, Or Third-party Tools. in Addition To Expressing Interest And Providing The Requested Information, Include Estimated Price Details. The Government Is Seeking Unit Price And Lead Time For Each Type Of Rack Mounted Data Acquisition Instrument Type. Brochures, Manufacturing Capability And Capacity, And Past Performance Information May Be Included In The Rfi Response. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics Code Assigned To This Notice. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In This Rfi In Order To Assist The Government’s Capability Determination.  far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance.  Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far).   interested Sources Should Provide Rfi Respsones And Related Data To The Pocs Identified Below, No Later Than 30 Days After The Post Date Of This Rfi. All Information Sent Should Reference This Rfi Number On The Subject Response Line Of The Emailed Response As Well As On All Enclosed Documents. Responses Must Include The Company Name, Address, Point Of Contact Name And Email/phone, And Company Size. Proprietary Data Must Be Marked On A Page-by-page Basis And Will Be Kept Confidential And Protected Where So Designated. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Rfp That May Be Issued. Any Comments Provided May Or May Not Be Included In A Formal Solicitation. Respondents May Provide Information And Rough Orders Of Magnitude (rom) On Any Currently Available Product Or A Company's' Capabilities That Will Meet The Navy's Requirements. responses Must Be Received No Later Than December 16th 2024 By 4pm Est.

Details: This Is A Request For Information (rfi) Only. There Is No Solicitation Package Available. the Naval Air Warfare Center, Aircraft Division (nawcad) Lakehurst, Nj Is Issuing This Request For Information Notice To Conduct Market Research To Identify Potential Sources And Request Information For A Potential Procurement Of Rack Mounted Analog Discrete Input Measurement Instruments For The Engine Test Instrumentation Replacement System (etirs). The Instrumentation Must Meet Various Functions, And Each Instrument Can Fulfill One Or Multiple Functional Requirements. this Is A Request For Information Only – Not A Request For Proposal. This Rfi Is Issued For The Purpose Of Determining Market Interest, Feasibility, And Capability Of Sources And Does Not Constitute A Request For Proposal Or Commitment By The Government. this Rfi Is Issued Sole For The Market Research Information And Planning Purposes And Does Not Constitute A Solicitation.  information Herein Is Based On The Best Information Available At The Time Of Publication, Is Subject To Revision, And Is Not Binding Upon The Government.  no Reimbursement Will Be Made Of Any Costs To Provide Information In Response To This Rfi Or Any Follow-up Information Requests. this Rfi Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Meeting The Requirements Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract.  navair Is Requesting Information On The Industry’s Capability Of Manufacturing Commercial Off The Shelf (cots) Or Modified Cots (mcots) Rack Mounted Analog To Digital Voltage Instruments That Meet Or Exceed The Requirements Below. the Rack Mounted Analog To Digital Voltage Instruments Shall Meet Or Exceed The Performance/environmental Requirements Shown In The Following Functional Breakdown: instrumentation Performance Requirements analog To Digital Voltage Measurement Performance Requirements ** Refer To The Tables In The Attached Instrumentation Characteristics Excel File For All Performance Requirements. The Performance Specification Is Export-controlled. In Order To Receive A Copy Of The Performance Specification Interested Respondents Must Be U. S. Dod Contractors. Interested Respondents Must Provide The Contracting Office Point Of Contact Identified Below With A Copy Of Their Current, Approved Form Dd2345, 'militarily Critical Technical Data Agreement'. Once Received And Current Jcp Certification Verified By Navair, The Draft Performance Specification Will Be Transmitted To You From Navair Via The Dod Safe System, To The Data Custodian You Have Identified On The Dd Form 2345. Contractors Must Request The Draft Performance Specification In Writing From Mr. Justin Panecki, Justin.p.panecki2.civ@us.navy.mil. acquisition Instrumentation Environmental Requirements the System’s Equipment Design, Located Outside The Instrument And Control Room (i&c Cab), Shall Meet Class 1 Environmental Requirements As Defined In Table 2 Of Mil-prf-28800. the System’s Equipment, Within The Instrument And Control Room (i&c Cab) Boundary, Design Shall Meet The Temperature And Humidity Requirements Of Class 4 Equipment In Section 3.9.2 Of Mil-prf-28800. the System Shall Be Fully Operational During The Expected Shipboard Deck Environmental Vibration Levels As Described Per Mil-std-167-1a, Type 1 - Environmental Vibration. the System’s Equipment Design Shall Comply With The Requirement Matrix For Navy Surface Ships And Navy Ground In Table 5 Of Mil-std-461 Or Equivalent. cs115 (conducted Susceptibility, Bulk Cable Injection, Impulse Excitation) And Cs118 (personnel Borne Electrostatic Discharge) Are Specified As Applicable. navair Is Requesting The Following Information From Industry Vendors To Demonstrate How They Can Meet The Requirements Listed Above: vendor Capability. vendor Capacity. documentation Demonstrating That The Vendor Is Capable Of Manufacturing Cots And/or Modified Cots Rack Mounted Instruments. Documentation Demonstrating That The Vendor Is Capable To Sustain The Product. any Information On Past Performance Of Similar Efforts. a Technical Data Sheet Describing The Electrical And Performance Characteristics Of The Instruments. the Vendors May Also Respond With A Presentation Of 5 Slides Or Less With A Specific Focus On Explanation Of Data Sheets And Instrument Performance In Relation To Gfi Requirements. navair Is Requesting The Following Information From Industry Vendors To Comprehend The Logistics Impacts Associated To Each Instrument: how Long Will The Product Be Supported For Procurement And Repair? does The Product Require Calibration? if So, Does The Product Require Additional Equipment/tools To Calibrate? all Interested Parties Should Have The Following: a Quality Assurance Program Compliant With Iso9001 Or Equivalent. test Data Demonstrating That The Above Performance And Environmental Requirements Have Been Met With The Proposed Rack Mounted Analog To Digital Voltage Instruments. acquisition Instrumentation Software Requirements instrumentation Shall Be Able To Be Controlled Through An Application Programming Interface (api) By Software Code Running On The Test Bench. Navair’s Preferred Apis Are Those Standardized Interfaces Defined And Managed By The Interchangeable Virtual Instrument (ivi) Foundation (https://www.ivifoundation.org) Including The Following: vxi Plug & Play standard Commands For Programmable Instrumentation (scpi) virtual Instrument Software Architecture (visa) interchangeable Virtual Instrument (ivi) all Interested Parties Should Respond With Their Compliance With The Above Apis For Each Potential Offering. If A Vendor’s Instrument Is Not Compliant With The Above Apis, They Should State So And, Instead, Provide An Overview Of How To Programmatically Control Their Instrument, Including Any Required Drivers, Applications, Programming Languages, Operating Systems, Or Third-party Tools. in Addition To Expressing Interest And Providing The Requested Information, Include Estimated Price Details. The Government Is Seeking Unit Price And Lead Time For Each Type Of Rack Mounted Data Acquisition Instrument Type. Brochures, Manufacturing Capability And Capacity, And Past Performance Information May Be Included In The Rfi Response. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics Code Assigned To This Notice. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In This Rfi In Order To Assist The Government’s Capability Determination.  far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance.  Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far).   interested Sources Should Provide Rfi Responses And Related Data To The Pocs Identified Below, No Later Than 30 Days After The Post Date Of This Rfi. All Information Sent Should Reference This Rfi Number On The Subject Response Line Of The Emailed Response As Well As On All Enclosed Documents. Responses Must Include The Company Name, Address, Point Of Contact Name And Email/phone, And Company Size. Proprietary Data Must Be Marked On A Page-by-page Basis And Will Be Kept Confidential And Protected Where So Designated. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Rfp That May Be Issued. Any Comments Provided May Or May Not Be Included In A Formal Solicitation. Respondents May Provide Information And Rough Orders Of Magnitude (rom) On Any Currently Available Product Or A Company's' Capabilities That Will Meet The Navy's Requirements. responses Must Be Received No Later Than December 16th 2024 By 4pm Est.

Details: Description Province Of Surigao Del Sur Municipality Of Lanuza Barangay Sibahay Invitation To Bid For Installation Of Barangay Cctv Barangay Sibahay, Lanuza, Surigao Del Sur 1.the Barangay Local Government Unit Of Sibahay (blgu Of Sibahay), Through Provincial Governor’s Office Intends To Apply The Sum Of Eighty- Nine Thousand, Five Hundred Seventy Pesos And Twenty Cents (php 89,570.20) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Installation Of Barangay Cctv Barangay Sibahay, Lanuza, Surigao Del Sur. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2.the Barangay Council Of Sibahay Now Invites Bids For: Item No. Qty. Unit Item Description Cctv Materials: 1 1 Pc. Dvr/ Nvr- 8 Channels 2 1 Pc. Storage-11tb Hdd For Video 3 2 Pcs Indoor Cams-h-4 Indoor (dome) 4 6 Pcs Outdoor Cams-ip Cam Turret (outdoor) 5 - - Ip Camps- 6 1 Pc Network Switch- Dahua-pfs3010 8port Poe Switch 7 5 Pcs Adapters 8 1 Pc Power Supply 9 1 Pc Cables-outdoor Utp-cat6e + Fiber Optr. Roll 10 2 Pcs Materials-installation Materials 11 2 Pcs Essential Components-media Converter Pair 12 9 Pcs Per Camera Installation 13 1 Pc Monitor 32” Smart Led Tv 3.the Blgu Of Sibahay Now Invites Bids For Installation Of Barangay Cctv Barangay Sibahay,lanuza,surigao Del Sur. Delivery Of The Goods Is Required Within Forty (40) Calendar Days Upon Receipt Of The Purchase Order. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 4.bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. (i)bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 5.interested Bidders May Obtain Further Information From Blgu Of Sibahay And Inspect The Bidding Documents At The Address Given Below During 8:00 A.m To 5:00 P.m. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders On January 10, 2025 To January 22, 2025 From The Address Below And Upon Payment Of A Non-refundable Fee For The Bidding Documents In The Amount Of One Thousand Pesos (php 1,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Non-refundable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6.the Blgu Of Sibahay Will Hold A Pre-bid Conference. 7.bids Must Be Delivered To The Address Below On Or Before 10:00 A.m. Of January 22, 2025. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bid Opening Shall Be On 10:00 A.m. Of January 22, 2025 At Barangay Office Of Barangay Sibahay, Lanuza, Surigao Del Sur. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8.the Blgu Of Sibahay Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 9.for Further Information, Please Refer To: (sgd.) Hon. Juvielyn O. Sarabosing Bac Secretariat Barangay Sibahay, Lanuza, Surigao Del Sur (sgd.) Hon. Joan E. Dagdag Bac Chairperson

Details: Description Request For Quotation Rental Service Of Professional Lights And Sounds Equipment, Led Video Wall Equipment, And Manpower For The 89th Founding Anniversary Of The Court Of Appeals (1 Lot) Amp-006-25 (svp) Sir/madam: Please Quote Your Best Proposal For The Item/s Described Below Using The Price Quotation Form (see Annex "a"), Subject To Terms And Conditions Stated Herein. Lot No. Item Description Approved Budget For The Contract 1 Rental Service Of Professional Lights & Sounds Equipment, Led Video Wall Equipment And Manpower For The 89th Founding Anniversary Of The Court Of Appeals ₱84,000.00 *the Abc Is Understood To Be The Ceiling Price; Offers Must Not Exceed The Abc Provided. The Quotation Duly Signed By You Or Your Duly Authorized Representative, Accompanied By Required Forms, Shall Be Submitted Not Later Than January 27, 2025; 11:00 Am At The Address Indicated Below: Atty. Joshua Felino Julian F. Dulce Secretariat, Bids And Awards Committee (bac) 3rd Floor, Centennial Building Court Of Appeals Ma. Orosa St., Ermita, Manila Bacsecretariat.ca@judiciary.gov.ph Only One (1) Set Of Documents Shall Be Required. To Protect The Integrity Of The Quotation, Bidders Are Encouraged To Submit Their Documents In A Sealed Envelope Or In A Compressed Archived Password-protected Envelope In Case Of Electronic Submission. The Sealed Envelope Shall Contain The Name Of The Contract To Be Bid In Capital Letters And Bear The Name And Address Of The Supplier In Capital Letters. Quotations And Other Documents Required May Either Be Submitted Manually At 3rd Floor Office Of The Bac Secretariat, Centennial Building, Court Of Appeals, Ermita, Manila Or Electronically To Bacsecretariat.ca@judiciary.gov.ph On Or Before The Deadline Of Submission As Stated In This Rfq. In Case Of Modification, It Must Be Done Before The Deadline For The Submission And Receipt Of Quotations And Labelled As A “modification”. The Time Stamped Or Indicated In The Latest Proposal Received Shall Be The Official Time Of Submission. The Bac Shall Assume No Responsibility For The Misplacement Of The Contents Of The Improperly Sealed Or Marked Bid, Or Submission Of Corrupted Files, Or For Its Premature Opening. Late Submission Of Quotations Shall Not Be Accepted And Considered. Atty. Arnel D. Macapagal Assistant Clerk Of Court Chairperson, Bids And Awards Committee The Price Quotation Form (annex “a”) Shall Be Submitted On Or Before The Deadline For Submission And Receipt Of Quotation. The Eligibility Requirements May Be Submitted Together With The Price Quotation Form, Or Not Later Than Two (2) Days From Receipt Of Notice From The Bac Secretariat Requiring The Submission Thereof. No Requirements Instruction 1 Price Quotation Form (annex “a”) Must Indicate The Unit And Total Price. Must Indicate The Required Information. Must Be Duly Signed By The Authorized Representative. 2 Mayor’s Permit For The Year 2025 Must Be Valid For The Year 2025. A Recently Expired Mayor’s Permit Together With The Official Receipt As Proof That The Prospective Bidder Has Applied For Renewal Within The Period Prescribed By The Concerned Local Government Unit Shall Be Accepted. 3 Philgeps Registration Number Submit Proof Of Registration (picture Or Screenshot Of Philgeps Registration On The Website) 4 Omnibus Sworn Statement (oss) (annex “b”) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Special Power Of Attorney In Case Of Sole Proprietorship; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Ensure That There Are Eleven (11) Declarations. Indicate Required Information. Attach Competent Evidence Of Identification (valid Government-issued Id. The Use Of Cedula Is Not Acceptable). Must Be Duly Notarized And Signed. Terms And Conditions: 1. Bidders Shall Provide Correct And Accurate Information Required In This Form. 2. Any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By You Or Any Of Your Duly Authorized Representative/s. 3. Price Quotations/s Must Be Valid For A Period Of Forty-five (45) Calendar Days From The Deadline Of Submission. 4. Quotations Exceeding The Abc Or Submitted Beyond The Deadline Shall Be Rejected. 5. Price Quotation/s — To Be Denominated In Philippine Peso — Shall Include All Taxes, Duties, And/or Applicable Discounts, If Any. 6. Award Of Contract Shall Be Made To The Lowest Quotation Which Complies With The Technical Specifications, Requirements And Other Terms And Conditions Stated Herein. 7. In Case Two Or More Bidders Are Determined To Have Submitted The Lowest Calculated And Responsive Quotation, The Court Of Appeals Shall Adopt And Employ “draw Lots” As The Tiebreaking Method To Finally Determine The Winning Bidder In Accordance With Gppb Circular No. 06-2005. 8. The Item/s Shall Be Delivered According To The Accepted Offer Of The Bidder. 9. The Court Of Appeals May Cancel Or Terminate The Contract At Any Time Under Any Of The Grounds Provided Under Ra No. 9184 And Its 2016 Revised Irr. 10. The Rfq, Purchase Order (contract), And Other Related Documents To The Above Stated Procurement Project Shall Be Deemed To Form Part Of The Contract. 11. The Notice Of Award, Letter Order, And Notice To Proceed Are Deemed Received As Of The Date Of Their Transmittal To The Winning Bidder’s Official Email Address. Hence, The Relevant Periods Under Ra No. 9184 And Its Irr, And The Rfq Shall Commence From Receipt Thereof. 12. Liquidated Damages Equivalent To One-tenth Of One Percent (0.1%) Of The Value Of The Goods Not Delivered Within The Prescribed Delivery Period Shall Be Imposed Per Day Of Delay. The Court Of Appeals May Terminate The Contract Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Amount Of The Contract, Without Prejudice To Other Courses Of Action And Remedies Open To It. 13. Payment Shall Be Made After Delivery And Only Upon The Submission Of The Required Supporting Documents, I.e. Delivery Receipt And Sales Invoice Or Official Receipt, By The Supplier, Contractor, Or Consultant Within Thirty (30) Calendar Days. In Case Of Accounts Maintained In Banks Other Than Landbank Of The Philippines, Bank Transfer Fees Shall Be Chargeable Against The Creditor’s Account. 14. For Payment Purposes, The Awarded Service Provider, Supplier, Or Consultant Is Required To Submit A Certified Copy Of Its Tax Clearance Certificate For Final Settlement Of Government Contracts And Bir Certificate Of Registration Or Bir Form 2303 In Accordance With Relevant Revenue Regulations. Annex "a" Price Quotation Form Date: _____________ The Chairperson, Bids And Awards Committee Court Of Appeals Ma. Orosa St., Ermita, Manila Sir: Having Examined The Request For Quotation No. Amp-006-25 (svp) The Receipt Of Which Is Hereby Duly Acknowledged, The Undersigned Offers The “rental Service Of Professional Lights & Sounds Equipment, Led Video Wall Equipment, And Manpower For The 89th Founding Anniversary Of The Court Of Appeals”, In Conformity With The Said Request For Quotation For The Sums Stated Hereunder: Uom Item Description Qty Total Price Professional Lights And Sounds Equipment 1 Lot Dj Controller 1 Unit 17” Laptop With Minimum Cpu Specifications Of At Least 3.00ghz And At Least 6 Core Count 1 Unit 22 Chanel Professional Studio Mixer 1 Unit 2000w Power Amplifiers Sound Processor 1 Set Powered Speaker 6 Units Sub Woofers 2 Units Wireless Microphones With Case 4 Units Par Lights 16 Units Light Stand 2 Units 90w Moving Heads 6 Units Smoke Machine 1 Unit Dj Boxes, Cables And Connectors 1 Set Speakers And Microphone Stand 2 Sets Dmx Controller 1 Unit Led Video Wall Equipment P3 Led Wall 9ft X 24ft 1 Set Led Riser 1 Set Video Processor And Controller 1 Set Video Switcher 1 Set Cables And Connectors 1 Set Computer Workstation 1 Set Stage And Accessories – 16x24x2 Ft. (lxwxh) Stage 1 Set Manpower Disk Jockey At Least 1 Personnel Sound Technician At Least 2 Personnel Light Technician At Least 4 Personnel Video Technician At Least 1 Personnel Stagehand At Least 3 Personnel Handyman At Least 3 Personnel Total Price In Figures: Total Price In Words: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________ Signature Over Printed Name _________________________ Position/designation _________________________ Office Telephone/mobile Nos. _________________________ Email Address After Having Carefully Read And Accepted The Above-mentioned Instructions And Terms And Conditions, I/we Submit Our Quotations For The Items/s As Follows: Technical Specifications Must Comply With The Following Minimum Requirements: Rental Service Of Professional Lights & Sounds, Led Video Wall Equipment, And Manpower For The 89th Founding Anniversary Of The Court Of Appeals (1 Lot) I. Approved Budget For The Contract: The Approved Budget For The Contract Is Eighty-four Thousand Pesos (php84,000.00) Inclusive Of All Applicable Taxes And Charges. Ii. Requirements: The Supplier Shall Supply And Deliver The Following Requirement: Lot Item Description Qty 1 Lot Professional Lights And Sounds Equipment Dj Controller 1 Unit 17” Laptop With Minimum Cpu Specifications Of At Least 3.00ghz And At Least 6 Core Count 1 Unit 22 Chanel Professional Studio Mixer 1 Unit 2000w Power Amplifiers Sound Processor 1 Set Powered Speaker 6 Units Sub Woofers 2 Units Wireless Microphones With Case 4 Units Par Lights 16 Units Light Stand 2 Units 90w Moving Heads 6 Units Smoke Machine 1 Unit Dj Boxes, Cables And Connectors 1 Set Speakers And Microphone Stand 2 Sets Dmx Controller 1 Unit Led Video Wall Equipment P3 Led Wall 9ft X 24ft 1 Set Led Riser 1 Set Video Processor And Controller 1 Set Video Switcher 1 Set Cables And Connectors 1 Set Computer Workstation 1 Set Stage And Accessories – 16x24x2 Ft. (lxwxh) Stage 1 Set Manpower Disk Jockey At Least 1 Personnel Sound Technician At Least 2 Personnel Light Technician At Least 4 Personnel Video Technician At Least 1 Personnel Stagehand At Least 3 Personnel Handyman At Least 3 Personnel Iii. Terms Of Payment: Payment Shall Be Made After Delivery And Only Upon The Submission Of The Required Supporting Documents, I.e. Delivery Receipt And Sales Invoice Or Official Receipt, By The Supplier, Contractor, Or Consultant Within Thirty (30) Calendar Days. In Case Of Accounts Maintained In Banks Other Than Landbank Of The Philippines, Bank Transfer Fees Shall Be Chargeable Against The Creditor’s Account. Payment Details: Banking Institution: ________________________________________________ Account Number: __________________________________________________ Account Name (should Be The Exact Account Name As Registered In The Bank): ________________________________________________________________ Bank Branch: _____________________________________________________ Iv. Delivery Address: Court Of Appeals, Ma. Orosa St., Ermita, Manila V. Delivery Requirements: Delivery Shall Be Made On Or Before 6:00 Am Of 03 February 2025, At Court Of Appeals – Manila, Maria Orosa St. Ermita, Manila. By Affixing My Signature Below, I Am Confirming Our Compliance With The Technical Specifications/terms Of Reference Stated Above. I Further Certify That Such Compliance Is True And Correct; Otherwise, If Found To Be False Either During The Bid Evaluation Or Post-qualification, The Same Shall Give Rise To Automatic Disqualification Of Our Bid. We Undertake, If Our Quotation Is Accepted, To Perform The Services/deliver The Goods In Accordance With The Schedule Of Requirements And Technical Specifications. Until A Formal Contract Is Prepared And Executed, This Quotation, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Or Any Quotation You May Receive. Date Company Name Authorized Representative Name/signature Address Official Contact Number ________________________ Email Address Annex “b” Omnibus Sworn Statement (revised) Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity; 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code; 11. [name Of Bidder] Hereby Assigns The Following Contact Number/s And E-mail Address/es As The Official Telephone/fax Number And Contact Reference Of The Company Where The Ps Bac And Ps Notices May Be Transmitted. Telephone No/s.: ________________________________ Fax No/s.: ________________________________ E-mail Add/s.: ________________________________ Mobile No.: ________________________________ It Is Understood That Notices/s Transmitted In Any Of The Above-stated Telephone/fax Numbers And/or E-mail Address/es Are Deemed Received As Of Its Transmittal And The Reckoning Period For The Reglementary Periods Stated In The Bidding Documents And The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 Shall Commence From Receipt Thereof. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory Subscribed And Sworn To Before Me This ___ Day Of [month] [year] At [place Of Execution], Philippines. Affiant/s Known To Me, And Known To Be The Same Person/s In The Exhibited [insert Type Of Government Identification Card Used*], With His/her Photograph And Signature Appearing Thereon, With No.________________________ Issued On ______________________ At ____________________. Witness My Hand And Seal This ___ Day Of [month] [year]. Name Of Notary Public Serial No. Of Commission ___________ Notary Public For ______ Until _______ Roll Of Attorney's No. _____________ Ptr No. _______ [date Issued], [place Issued] Ibp No. _______ [date Issued], [place Issued] Doc. No. ______ Page No. ______ Book No. _____ Series Of _____.

Details: Description Republic Of The Philippines Province Of Davao De Oro Office Of The Governor Bids And Awards Committee Itb No. 24-092 Invitation To Bid For Supply And Delivery Of Access Switch With 10g Transceivers With Optical Transceiver Sfp 10g Single Mode 1. The Provincial Government Of Davao De Oro, Through The Ab Cy 2024/sb2 Capital Outlay Intends To Apply The Sum Of Four Hundred Sixty-eight Thousand Six Hundred Fifteen Pesos (php 468,615.00) Being The Abc To Payments Under The Contract For Supply And Delivery Of Access Switch With 10g Transceivers With Optical Transceiver Sfp 10g Single Mode For The Use Of Structured Cabling- Picto With Purchase Request No. 24-5664 Under Bid No. B-24-0326 Rebid. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Davao De Oro Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Sixty (60) Days. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184. 4. Prospective Bidders May Obtain Further Information From Bids And Awards Committee (bac) Secretariat Office, 3rd Floor, Right Wing, Provincial Capitol Building, Cabidianan, Nabunturan, Davao De Oro Province And Inspect The Bidding Documents At The Address Given Below During Mondays To Fridays (8:00 A.m. To 5:00 P.m.). 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 31, 2024 From The Given Address And Upon Payment Of The Applicable Fee For The Bidding Documents To The Provincial Government Of Davao De Oro, Thru Provincial Treasurer’s Office, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos (php 500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before January 7, 2025 Until 8:30 A.m. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. Bid Opening Shall Be On January 7, 2025, 9:30 A.m. Onwards At 3rd Floor, Bids And Awards Conference Room, Provincial Capitol, Cabidianan, Nabunturan, Davao De Oro Province. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. The Provincial Government Of Davao De Oro Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Jenes B. Miñoza Head – Bac Secretariat Bids And Awards Committee (bac) Secretariat Office 3rd Floor, Right Wing, Provincial Capitol, Cabidianan, Nabunturan, Davao De Oro Province – 8800 Cel #: 0946-470-6261 Email Address: Bac@davaodeoro.gov.ph 11. You May Visit The Websites: For Downloading Of Bidding Documents: Philgeps.gov.ph / Davadeoro.gov.ph Date Of Issue: December 31, 2024 Sgd: Lara Zaphire Kristy N. Bermejo, Mpa Chairperson, Bids And Awards Committee

Details: Description Republic Of The Philippines Province Of Davao De Oro Office Of The Governor Bids And Awards Committee Itb No. 24-091 Invitation To Bid For Supply And Delivery Of Fire Suppression System 1. The Provincial Government Of Davao De Oro, Through The Ab Cy 2024/sb2 Capital Outlay Intends To Apply The Sum Of Three Million Pesos (3,000,000.00) Being The Abc To Payments Under The Contract For Supply And Delivery Of Fire Suppression System For The Use Of Structured Cabling- Picto With Purchase Request No. 24-5687 Under Bid No. B-24-0333. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Davao De Oro Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Thirty (30) Days. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184. 4. Prospective Bidders May Obtain Further Information From Bids And Awards Committee (bac) Secretariat Office, 3rd Floor, Right Wing, Provincial Capitol Building, Cabidianan, Nabunturan, Davao De Oro Province And Inspect The Bidding Documents At The Address Given Below During Mondays To Fridays (8:00 A.m. To 5:00 P.m.). 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 31, 2024 From The Given Address And Upon Payment Of The Applicable Fee For The Bidding Documents To The Provincial Government Of Davao De Oro, Thru Provincial Treasurer’s Office, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (php 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps) And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Provincial Government Of Davao De Oro Will Hold A Pre-bid Conference On January 7, 2025, 1:00 P.m. Onwards At 3rd Floor, Bids And Awards Conference Room, Provincial Capitol, Cabidianan, Nabunturan, Davao De Oro Province, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before January 21, 2025 Until 8:30 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On January 21, 2025, 9:30 A.m. Onwards At 3rd Floor, Bids And Awards Conference Room, Provincial Capitol, Cabidianan, Nabunturan, Davao De Oro Province. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Provincial Government Of Davao De Oro Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Jenes B. Miñoza Head – Bac Secretariat Bids And Awards Committee (bac) Secretariat Office 3rd Floor, Right Wing, Provincial Capitol, Cabidianan, Nabunturan, Davao De Oro Province – 8800 Cel #: 0946-470-6261 Email Address: Bac@davaodeoro.gov.ph 12. You May Visit The Websites: For Downloading Of Bidding Documents: Philgeps.gov.ph / Davaodeoro.gov.ph Date Of Issue: December 31, 2024 Sgd: Lara Zaphire Kristy N. Bermejo, Mpa Chairperson, Bids And Awards Committee

Details: Under Chhattisgarh Housing Board, Circle-Durg, Manual tender of Rs. 9.97 lakh in Form-B is invited from competent category contractors registered in Integrated Registration System for supply and testing of submersible pump, mono block pump, open well pump, panel board, control cable, GI pipe etc. for water supply in buildings in Mursunda Kumhari, District-Durg under Atal Vihar Yojna. Details are available in Board website www.cghb.gov.in. For other information, contact Executive Engineer, Division-Durg on Mobile No. 94242-09025.