Cable Tenders

Details: The Contract Is For The Construction Of The 6th Street Active Transportation Bridge. The Bridge Will Provide A Third Crossing Over The Courtenay River Within The City Of Courtenay And Is Intended To Provide An Active Transportation Link Between East And West Courtenay That Is Accessible To All Users. This Project Is Funded In Part By The Government Of Canada. The Project Generally Consists Of The Following Work: • Site Preparation, Excavation, And Removals; • Supply, Fabrication, And Erection Of New Pedestrian/cycling Cable-stayed Steel Bridge Over The Courtenay River And Approach Retaining Walls; • Construction Of Trail Tie-ins, Paving, And Civil Works At Simms Millennium Park Side; • Installation Of Electrical Works For Bridge Lighting, Cyclist Counter, And Miscellaneous Components; • Intersection Upgrades At 6th Street And Anderton Ave And Along 6th Street, Including Traffic Management While Working In The Roadways; • Landscaping Across The Project Site, Including Plantings And Hydroseeding; • Supply And Installation Of Security Screening Beneath Bridge Back Spans; And • Supply And Installation Of Critter Passage At East Approach. A Non-mandatory Site Meeting Will Be Held On December 12, 2024 At 1:00pm Local Time. The Tour Will Start In The Parking Lot Of Simms Millennium Park.

Details: Title: Procurement Of A Framework Agreement For Digital Work Surfaces And Av Equipment. description: Trondheim Municipality (the Customer) Shall Implement A Negotiated Procedure With The Intention Of Entering Into A Framework Agreement For The Procurement Of Digital Desktop Virtual Equipment Such As Windows Pcs, Chromebooks, Chromebox, Smartphones And Tablets With Accompanying Equipment (monitors, Mice, Keyboards, Cables Etc.) As Well As Av Equipment. In Addition A Maintenance Contract Shall Be Signed For The Selection Of Products, Error Handling, Handling Of Returned Equipment As Well As Replacing Machines With An End Of Their Lifetime. The Qualification And Submission Of Tenders Will Occur In A Process.

Description: Contact Information|4|n97113b|fba|717-605-1765|heidi-jo.below.civ@us.navy.mil| Item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| Inspection Of Supplies--fixed-price (aug 1996)|2||| General Information-fob-destination|1|b| Wide Area Workflow Payment Instructions (jan 2023)|16|invoice & Receiving Report (combo)|n/a|tbd|n00104|tbd|tbd|see Schedule|tbd|n/a|n/a|tbd|n/a|n/a|n/a|n/a|navsup.wawf.wss.ftc@navy.mil| Note For Contractor/administrative Contracting Officer|3|||| Navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| Notice Of Total Small Business Set-aside (oct 2020)(deviation 2020-o0008)|1|| Alternate A, Annual Representations And Certifications (oct 2024)|13|||||||||||||| Annual Representations And Certifications (may 2024)|13|332999|750|||||||||||| Notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| To View The Drawings: Go To Www.sam.gov Click: Contract Opportunities And Enter The Solicitation Number. This Gives You Access To The Electronic Solicitation. Drawings Can Be Viewed Or Downloaded. Government Source Inspection Per Far 52.246-2 Is Required. Delivery_______________days. All Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders,delivery Orders And Modifications) Related To The Instant Procurement Areconsidered To Be "issued" By The Government When Copies Are Either Depositedin The Mail, Transmitted By Facsimile, Or Sent By Other Electronic Commercemethods, Such As Email. The Government's Acceptance Of The Contractor'sproposal Constitutes Bilateral Agreement To "issue" Contractual Documents Asdetailed Herein. 1. Scope 1.1 This Contract/purchase Order Contains The Requirements For Manufacture Of The Cable Assy . 2. Applicable Documents 2.1 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. Drawing Data=7128441 |53711| D| |d|0001 | D|49998|3978982 3. Requirements 3.1 Manufacturing And Design - The Cable Assy Furnished Under This Contract/purchase Order Shall Meet The Material And Physical Requirements As Specified ;on Drawing 7128441-3 (53711) Rev D; . 3.2 Marking - Unless Marking Requirements Are Specified By A Document Or Drawing Cited In This Solicitation All Items Delivered Under This Contract/purchase Order Shall Be Marked And Identified In Accordance With The Applicable Military Standards And Specifications As Follows: Mechanical Parts, Assemblies And Equipments - Mil-std-130 Electrical And Electronic Parts - Mil-std-1285, Method 1. Electrical And Electronic Parts And Assemblies Not Covered By Mil-std-1285-use Mil-std-130. Electronic Equipment - Mil-std-454 Requirement Number 67. Electrical Equipment - Mil-p-15024/5 (ships) 3.3 Configuration Control - Mil-std-973 Entitled "configuration Management", Paragraph 5.4.8, Configuration Control (short Form Procedure), Is Hereby Incorporated. The Contractor Shall Submit All Engineering Change Proposals In Accordance With Mil-std-973, Paragraph 5.4.8.2 And Appendix D. Requests For Deviations Shall Be Processed In Accordance With Mil-std-973, Paragraph 5.4.8.3 And Appendix E. Requests For Waivers Shall Be Processed In Accordance With Mil-std-973, Paragraph 5.4.8.4 And Appendix E. (original And Two Copies Shall Be Submitted To Contracting Officer, Navicp-mech, P. O. Box 2020, Mechanicsburg Pa. 17055-0788.) 4. Quality Assurance 4.1 Responsibility For Inspection - Unless Otherwise Specified In The Contract/purchase Order, The Contractor Is Responsible For The Performance Of All Inspection Requirements As Specified Herein. Except As Otherwise Specified In The Contract/purchase Order, The Contractor May Use His Own Or Any Other Facilities Suitable For The Performance Of The Inspection Requirements Specified Herein, Unless Disapproved By The Government. The Government Reserves The Right To Perform Any Of The Inspections Set Forth In The Specification Where Such Inspections Are Deemed Necessary To Assure Supplies And Services Conform To Prescribed Requirements. 4.2 Responsibility For Compliance - All Items Must Meet All Requirements Of This Contract/purchase Order. The Inspection Set Forth In This Specification Shall Become A Part Of The Contractor's Overall Inspection System Or Quality Program. The Absence Of Any Inspection Requirements Shall Not Relieve The Contractor Of The Responsibility Of Assuring That All Products Or Supplies Submitted To The Government For Acceptance Comply With All Requirements Of The Contract/purchase Order. Sampling In Quality Conformance Does Not Authorize Submission Of Known Defective Material, Either Indicated Or Actual, Not Does It Commit The Government To Acceptance Of Defective Material. 4.3 Records - Records Of All Inspection Work By The Contractor Shall Be Kept Complete And Available To The Government During The Performance Of Contract/purchase Order And For A Period Of 365 Calendar Days After Final Delivery Of Supplies. 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Shall Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. Mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. A. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documents That Are Required By Private Industry In Fulfillment Of Contractual Obligations In Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. B. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. They May Be Obtained From The Publishers Of The Applicable Societies. C. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410p, 101 Strauss Avenue Indian Head, Md 20640-5035 D. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contract Number, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For Certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. E. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: Contracting Officer Navicp-mech Code 87321 5450 Carlisle Pike P.o. Box 2020 Mechanicsburg, Pa. 17055-0788 F. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered From: Commanding Officer Navicp-mech Code 009 5450 Carlisle Pike P.o. Box 2020 Mechanicsburg, Pa. 17055-0788 G. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: Naval Inventory Control Point Code 1 Support Branch 700 Robbins Avenue Phildelphia, Pa. 19111-5094 H. Interim Changes And Classified Specifications Shall Be Obtained By Submitting A Request On Dd Form 1425 To Navicp-mech. 6.2 Ordinance Document (od) Controlled Items - Award For An Item Will Be Made Only To The Vendor(s) Listed On ;od36190; . A Substitute Item Is Not Authorized Without Prior Testing And Approval. Contractors Are Cautioned That Award Of This Contract/purchase Order Will Not Be Delayed Solely For The Purpose Of Approving Additional Sources. Contractors Desiring To Provide A Substitute Item Are Urged To Contact The Government Pco To Arrange For Testing And, If Approved, Added To The Od As An Approved Source Of Supply For Subsequent Procurements. On Drawing 7128441-3 (53711) Rev D Approved Source Of Supply - Stonewall Cable (cage 1phq9) Internal Pt Number Sc-7610-3 \

Description: On Risk & Cost Piped Water Supply Scheme For Village-aanandpur(sadakpara),aanandpur(purabtola),block-ramchandrapur, District – Balrampur(c.g.) Construction, Testing And Commissioning Of R.c.c. Elevated Service Reservoir Of 45 Kl Capacities – 01 No. & Staging 12 Mtr {steel Structure 12 M Height & 10 Kl (5000l X 2no.) – 00 No. And Steel Structure 09 M Height & 10 Kl (5000l X 2no.)- 00 No.} Of Total - 00 Nos. Pe Tank & Elevated Service Reservoirs Of Rcc Staging And Hdpe Slim Tank Of Capacity 5000 Ltr Of 00 No. 9 Mtr Staging (with Switch Room Of Size 1.8mx1.8mx3m) And 10000 Ltr Of 00 No. 12 Mtr Staging.including Providing And Fixing Of Ci Double Flange Pipe, Double Flange Specials & Di Double Flange Soft Seated Sluice Valve Including Construction Of Suitable R.c.c. Valve Chamber.providing, Laying, Jointing, Interconnection, Testing And Commissioning Of Rising Main Upvc Class 10 Kg/sqcm 90 Mm Dia 00 M & Hdpe 75mm Dia 00 M & 63 Mm Dia 00 M., Distribution Upvc Class 6kg/sqcm 90mm Dia. 00 M., 110 Mm Dia. 00 M., 140 Mm Dia. 00 M. 160 Mm Dia. 00 M.& Distribution Hdpe Class 6kg/sqcm 63 Mm Dia. 2446 M., 75 Mm Dia. 1459 M.with Suitable Joints Gi Pipe, Valve, Specials And All Fittings Including All Allied Civil Works, Supplying & Installation Of Energy Taging N Five Star Bee Rating Isi Marked Required Capacity Single Phase / Three Phase, 50 Hz, 220v,, Deep Well Submersible Pump Stainless Steel Body, Suitable For 4”/6” Tube Well With Contral Panel Starter Suitable For Submersible Pump With Dry Run Protection, Connections, Including Clamps, Bore Cap Etc. As Required As Per Specifications Butexcludingpipe,ss/nylonwireropeandconnection Cable Including Verification Of Tubewell Yield& Electric Connection From Cspdcl, Construction Of Brick Masonry Switch Room, Construction Of Boundary Wall Around The Over Head Tank, Installation Of Electro Chlorinator , Construction Of Chlorinator Room Of Providing Functional Household Tap Connection (f.h.t.c. 119 ) In Individual Households And Government Instiution Etc. Complete With Trial Run Of 03 Months After That O&m Of 06 Months Under Piped Water Supply Scheme Under Jal Jeevan Mission For Village- Aanandpur(sadakpara),aanandpur(purabtola),,block- Ramchandrapur, District – Balrampur(c.g.)

Description: * Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". Nb!!! Please Ensure That You Attach The Technical Data Sheets And Pictures Of The Item Quoted On, To Your Rfq Submission****failure To Adhere To This Requirement, May Result In Your Offer Being Non-responsive**** Allocation Of Preference Points *nb: The Municipal Bidding Document 6.1 (mbd 6.1) Has Been Amended, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission. In Order To Qualify For Preference Points, It Is The Responsibility Of The Bidder To: Submit A Duly Completed Mbd 6.1 Form (bidders Must Indicate How They Claim Points For Each Specific Goal). Submit Documentary Proof Of Updated Bbbee Certificate/sworn Affidavit And/or Cipc Certificate With Each Rfq Submission To Validate Specific Goals. (if A Bidder Is Registered And Active On The City#s Supplier Database And Has Submitted The Bbbee Certificate/ Sworn Affidavit/ Cipc Certificate, The Submission Of Said Documents Is Not Necessary). It Is Therefore Incumbent On Suppliers To Ensure That Documents Are Kept Updated. Failure To Comply With The Above Will Result In A Zero (0) Allocation For Preference Points. *** Please Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up-to-date. If You Utilise Couriers And Do Not Have Motor Vehicle Insurance, Then Please Mention This. Also Ensure That Your Updated Declaration Of Interest And Bbbee Is Attached At All Times*** Please Supply. Optimate 7 Tm-260 Optimate 7 Product Brochure (pdf) Optimate 7 Instruction Manual (pdf) Optimate 7 12v-24v Is Perfect For High-performance 12v And 24v Starter And Deep Cycle Batteries That Demand Accurate Temperature Controlled Charging And Unsupervised Safe Long Term Maintenance. Special Features: Designed For Sensitive Electronics: The Save Program Has Been Designed For Safe Fully Automatic Low Volt Start (from 0.5 Volts) And Pulse Recovery Of Deep Discharged Batteries Connected To Very Sensitive Electronics E.g. Light Aircraft, Industrial Equipment. Youtube Video Protection Against Incorrect Voltage Selection: With 24v Selected And A 12v Battery Is Connected Optimate 7 12v-24v Will Immediately Warn That A Low Voltage Is Sensed And Then Not Proceed To Charging. User Must Confirm The Nominal Voltage Of The Connected Battery Is 24v Before Save Mode Activates. Charging Amps: 10a @ 12v / 5a @ 24v (ampmatic) Use: Indoor / Outdoor (lowest Temperature: -40°f / -40°c). Save: Low Volt Start Of 0.5v (12v) + 1-step Desulphation Recovery. Ideal For: Std, Agm <(>&<)> Gel 12v (batteries From 3 # 400ah) | 24v (batteries From 1- 200ah). Input: Global (100-240v 50-60hz), High Efficiency (cec Listed), Fully Sealed. Style: Weatherproof Case With Wall Mounts, With 6ft / 180cm Ac Supply Lead And 6ft / 180cm Charge Lead Ending In Sae Connector. Weatherproof Battery Lead <(>&<)> Standard Battery Clip Set * Please Supply Launch X431 Pro Elite Is A New Release (august 2023) With The Tablet And Functions Of The X431 Pro 5th Gen, At A Very Attractive Price, But With Obd Diagnostic Cable Instead Of Bluetooth Connector, And 2 Years Updates Included. 2023 Advanced Oe-level Functions: Guided Functions + Variant Coding (offline Programming) + Autoauth For Fca Sgw+ Online Coding + Flash Hidden Functions + Anti-theft Immo Service + +offline Coding + Initialization + Adaptations 32+ Reset Functions (newly Added Gpf Regeneration, High Voltage Battery Health Test, Reset Program(extension). Autovin Intelligent Diagnosis + Oe-level All Systems Diagnostics Active Test (bi-directional Control): Actuate Solenoids And Actuators For Active Testing, Send Commands To Systems/components To Test Their Working Status. Ecu Coding (online Coding): Match, Learn, Or Code The Newly Replaced Ecu; Customize Your Car, Or Disable The Annoying Functions; Reprograms The Adaptive Data For Certain Components After Repairs Or Replacement. Key Programming: Add, Delete <(>&<)> Reprogram Keys, Rewrite Smart Keys, All Smart Keys Lost, Replace Immo Ecu, Relearn A Key. (for Newer Cars And Advanced Function Optional Add-on Module Xprog3 Is Supported. More Than 150 Brands Supported + 2 Years Update Online Maintenance Resources: Operating Skills, Dtc Help, Automotive Technology Handbook, Repair Case And How-to Videos. For 2017 And Later Fca Vehicles With Secure Gateway Module (sgw) Register With Autoauth To Enable Your Launch X431 Pro Elite Tablet To Communicate With The Fca Sgw Authentication System And Bypass The Security Gateway. * Please Supply Mac Afric 750 Kg Hydraulic Coil Spring Compressor Or Eq Specifications Additional Information Delivery <(>&<)> Warranty Faqs Travel / Stroke 100 Mm Max Height 260 Mm Max Diameter 130 Mm Operation Type Hydraulic Max Shock Absorber Length 250 Mm Capacity 750 Kg * Please Supple 4.5t 2 Post Lift Description: Manual Release From Two Sides, Double Insurance Self-locking Protection Device, Safe And Easy To Operate. Equalization Of Two Steel Cables Force Both Sliding Blocks To Move Synchronously, Effectively Preventing The Vehicle From Tilting. Minimum Height Of The Lifting Pad Is 110 Mm, Easily Lift And Suitable For Low Profile Cars And Suv. Equip Aluminum Motor And Car Door-opening Protection As Standard Configuration. Reliable Oil Cylinder, Adopts Chrome-plating Honed Cylinder And Piston Rod, With Italian Seals On Hydraulic Rams, Ensuring Long Service Life. Key Features: Manual Release From Two Sides For Added Safety And Convenience. # Double Insurance Self-locking Protection Device Ensures Secure Operation. # Equalization Of Two Steel Cables Forces Both Sliding Blocks To Move Synchronously, Preventing Vehicle Tilting. # Minimum Lifting Pad Height Of 110 Mm, Suitable For Low Profile Cars And Suvs. # Equipped With An Aluminum Motor And Car Door-opening Protection As Standard Configuration. # Reliable Oil Cylinder With Chrome-plated Honed Cylinder And Piston Rod, Featuring Italian Seals On Hydraulic Rams For Longevity. Technical Information: **- Passed 115% Dynamic Test And 150% Static Test. # Manual Release Capability. # Lifting Capacity: 4500 Kg # Lifting Height: 1800 Mm (70.9"). # Machine Height: 2824 Mm (111.2"). # Machine Width: 3426 Mm (134.9"). # Rise Time: 55 Seconds. # Drop Time: 26 Seconds. # Power Of Motor: 2.2 Kw. # Power Supply: 220v.**

Details: Description Procurement Of Ict, Machinery And Equipment For The Use Of The Schools Division Office - 1st Quarter 2025 Printer, 3 In 1, Print, Scan And Copy, With Feeder For Legal Size Paper Units 6 External Hard Drive, 1 Tb, Simple, Compact And Pc-compatible Pieces 2 Scanner ,2-sided Scan Up To 40 Page Per Minute, Mobile Connect App, Advanced Image Processing And Batch Scan, 80 Sheet Automatic Document Feeder (adf), Ultrasonic Multifeed Sensor, Separation Switch Units 3 Hdmi Cable, 10m, Hdmi To Hdmi Units 1 Paper Shredder, Heavy Duty, Minimum Specs - 24-sheet Ross Cut Paper Shredder, 220 V, 8.7" Paper Entry Size, With Removable Pull-out Bin, With Reverse Function Unit 4 Metal Detector, Hand Held, Alarm Indication Simultaneous High Intensity Red Led And Piezo Sounder Units 2 Wireless Hdmi, Transmitter & Receiver 50m Hdmi Trans, 1080p Rece, Extender Av Adapter Units 2 Wireless Clicker 2.4ghz Usb-receiver Bluetooth Digital Laser Pointer Pc/mac/android/ios Receiver:h40.4mm, W17.2mm, D6.8mm, W3.3g Units 2

Details: The New York District, U.s. Army Corps Of Engineers Intends To Solicit A Contract For Ship Repair That Includes Sole Source Items. these Are The Brand Name Items And Services Required Of The P/b Hocking Maintenance Shipyard: a. Paint/coating System: Sherwin-williams Product Line ($46,000) sherwin-williams Duraplate 235 sherwin-williams Antifouling 121 sherwin-williams Armortile B67b-100 sherwin-williams Steel Master b. Integrated Navigation Software: Rose Point Electronic Charting Software ($2,600) c. Navigation System Upgrades: Furuno Sc-70 Satellite Compass/antenna ($4,295), d. Furuno Antenna Cable (item 001-524-1000) ($225) e. Pyi Shaft Seals (serial # 02-212-400) this Is Not A Formal Solicitation Or Request For Proposal. This Notice Of Intent Is To Give Notice Of The Government's Intent To Make A Sole Source Award Under The Authority Cited In Federal Acquisition Regulation 6.302-1- Only One Responsible Source And No Other Supplies Or Services Will Satisfy Agency Requirements. any Vendor Wishing To Propose An Alternative Source Must Provide A Copy Of All Relevant Data Demonstrating The Alternative Source Satisfies The Above Requirements, By The Required Due Date And Time, To Monica Coniglio At: Monica.n.coniglio@usace.army.mil. this Is Not A Request To Respond To A Solicitation.

Details: Description Supply And Installation Of Public Announcement System To 51 Barangay In The City Of Malolos Package Inclusion: 1. Ip Network Pa & Intercom System Software License One Time Payment (lifetime License) 2. Ip Network Paging Mic (with 7inch Touch Screen) 3. Ip Horn Speaker 45-50w (220v) 100m-150m Range 4. 4 100m Poe Port, 1 100m Uplink Port, 802.3af/at 5. Pull Box Outdoor 6. 3.5mm Dia Thhn Electrical Wire (red)(blue)(yellow)(150m Per Roll) 15m Per Barangay 7. Pc Desktop With 32” Monitor 8. 1000 Base-sx Sfp 850-nm 550-m Ddm Duplex Lc Mmf Optical Transceiver Module. Max. Power Consumption 1.5w Hot Pluggable Sfp Msa Compliant Digital Optical Monitoring Capability For Strong Diagnostic Capabilities Compliant With Ieee 802.3z Gigabit Ethernet Class 1 Laser Safety And Rohs Compliant 9. Cat6 Utp Cable Outdoor Pure Copper 10. Other Consumables, Hanger, Support, Fittings And Accessories

Details: Description 4 Pc Heavy Duty Uninterruptable Power Supply 1,200 W To 2000w / 1000v To 2200v 2 Pc Heavy Duty Uniterruptable Power Supply 650w To 1000w / 650v To 1000v 1 Unit Computer Cpu Core I5, 14th Generation With Intel Integrated Graphics And Motherboard: Gigabyte H610m-k/ram:16gb, Ddr4 With Complete Accessories (cpu Only) 2 Set Computer Desktop Set (24" Monitor And Cpu Cor I5, 14th Generation With Intel Integrated Graphics And Motherboard: Gigabyte H610m-k/ram:16gb, Ddr4) With Complete Accessories 1 Unit Heavy Duty Touch Notebook Laptop Core I7, Motherboard:16gb Ddr4, Pci Values: 512gb, Graphics: Intel Iri Xe, Ms Office Home With Pen And Bag 5 Pc Heavy Duty Computer Avr 1 Pc 6 Port Hub 1 Pc Utp Cable (6 Meters) 1 Pc Hdmi To Hdmi Cord 1 Pc Epson L3210 Printer Power Cord 1 Pc Ram 8gb Ddr3 1 Pc Ssd 256gb

Details: Description 1 Lot Various Ict Tools And Equipment All Tools And Equipment Must Be Authentic And High Quality; " (1 Unit) Cordless Vacuum Cleaner (tool Only) Specifications: Battery Voltage: 18 V Weight Excl. Battery: 1.3 Kg Container Volume: 0.7 L Filter Surface Area: 55 Cm² Max. Airflow Rate (turbine)10 L/s Max. Vacuum Pressure (turbine) 60 Mbar Operating Time 18 V 7 Mins/ah With Crevice Nozzle Floor Nozzle Flexible Extension Tube Crevice Nozzle 2 X Suction Tubes;" " (1 Unit) Cordless Blower (tool Only) Specifications: Battery Voltage:18 V Max. Airspeed: 75 M/s Weight Excl. Battery: 1.1 Kg Max. Airflow120 M³/h Runtime Speed I :9 Min/ah, Speed Ii : 5 Min/ah No-load Speed: 17,000 Rpm Product Dimension: Length: 523mm Height: 208mm 1 Unit 18v-120 Professional Cordless Blower 4 X Accessories (nozzle, Extension Tube, Deep Hole Nozzle, Dust Collection Tube);" " (1 Set) Cordless Drill Freedom Kit Specifications: - Product Details: - Battery Voltage:18 V - Torque (soft/hard/max.)28/50/50 Nm - Weight Excl. Battery: 1.1 Kg - No-load Speed (1st Gear / 2nd Gear) 0 – 460 / 0 – 1,800 Rpm - Chuck Capacity, Min./max.1.5 / 13 Mm - Torque Settings: 20+2 - Battery Type: Lithium-ion - Max. Impact Rate: 27,000 Bpm - Drilling Diameter: - Max. Drilling Diameter In Aluminum: 13 Mm - Max. Drilling Diameter In Wood: 35 Mm - Max. Drilling Diameter In Steel: 13 Mm - Max. Drilling Diameter In Masonry: 13 Mm - Max. Screw Diameter: 10 Mm - Total Vibration Values (drilling In Metal) - Vibration Emission Value Ah: 2.1 M/s² - Uncertainty K: 1.5 M/s² - Metal Chuck / Brushless Motor What's In The Box: - With 2 X 2.0 Ah Li-ion Battery - 2 X Battery Gba 18v 2.0ah1 600 Z00 036 - Charger Gal 18v-20 Professional - L-case;" " (2 Unit) Pass-thru Modular Crimper Specifications: Complete Tools: Wire Crimper/wire Cutter/wire Stripper Pass-thru Modular All-in-one Tool For Video, Datacom And More. Handle Color: Yellow/black Features: * Fast, Reliable Modular Crimp-connector Installation For Voice And Data Applications * All-in-one Tool Cuts, Strips And Crimps Paired-conductor Data Cables(round Stp/utp And Flat-satin Phone Cables) * Crimps Rj11/rj12 Standard Modular Connectors, And Crimps And Trims Tools Pass-thru Connectors * Full-cycle Ratchet Mechanism Ensures Complete Connector Termination * Trims Flush To End Face Of Connector To Eliminate Unintended Contact Between Conductors * On-tool Wiring Guide To Minimize Wiring Errors * Not For Use With Standard(non-pass-thru) Connectors" " (1 Unit) Digital Multimeter Specifications: Maximum Voltage Between Any Terminal And Earth Ground 600 V Display (lcd) 6000 Counts, Updates 3/sec Battery Type 2 Aaa, Neda 24a, Iec Lr03 Battery Life 200 Hours Minimum;" " (1 Set) Network Cable Tester Specifications: Network Cable Tester; Lan Optical Power Meter Tester; Lcd Display; Measure Length, Wiremap Tester, Cable Tracker; Cable Type: Cat5/cat6 Voltage: 60v Transmitter: Wiremap Port: Rj45 Remote Continuity: ≥300m Cable Sequence And Fault Test: Yes Stp/ntp: Yes Short Circuit Reminder: Yes Anti-jamming And Normal Mode: Yes Audio Transmission Frequency: 455khz Audio Transmission Distance: Rj45 300m Nvl: 10mw Power Meter: 850/1300/1310/1490/1550/1625nm (wavelength) Crimping: Rj45-8 Cores, Min Length Is ≥10cm Low Voltage Prompt: <3.5v±0.1v, Power Indicator Flashes Power Supply: 3.7v 1500mah Polymer Lithium Battery Receiver: Scan Current: ≤300ma Remote Continuity: ≥300m Ncv Detection: Yes Lamp: Yes Low Voltage Prompt: Yes Power Supply: 3.7v 1500mah Polymer Lithium Battery Inclusions: 1 * Transmitter 1 * Receiver 1 * Rj45 Adapter Line 1 * Rj11 Adapter Line 1 * Crocodile Clip Test Line 1 * Type-c Data Cable 1 * Earphone 1 * Carry Bag;" " (2 Pcs) Dynagrip Lineman Pliers 8 Inches Specifications: Carbon Steel Drop Forged For Durability Slip Resistant Bi-material Handle For Comfortable Grip Fixed Joint Design For Grasping, Bending And Cutting Measurements: 8 Inches;" " (2 Pcs) Dynagrip Lineman Pliers 6 Inches Specifications: Carbon Steel; Drop Forged For Durability Slip Resistant Bi-material Handle For Comfortable Grip; Fixed Joint Design For Grasping, Bending And Cutting; Measurements: 6 Inches;" " (1 Set) Socket Rachet Wrench Set (1/4"" & 1/2"" Drive) Specifications: Complete Set Of 94pcs; 18pcs 1/2 ″ Crv Socket: 10, 11, 12, 13, 14, 15,16, 17, 18, 19, 20, 21,22, 23, 24,27, 30, 32 Mm Ergonomic Ratchet Handle Two Component 2 Pieces: 1/2 """", 1/4"""" 1pc 1/4 ″ Crv Handle: 150 Mm 1pc 1/2 ″ Crp Extension Bar: 250 Mm 2pcs Crv Spark Plug Sockets: 16mm, 21mm Universal Joint Crp 1pc 1/2 ″ Extension Bar Crp 1pc 1/2 ″: 125 Mm Adapter 1pc 1/2 ″ Crv 3 Ways Sockets 12v 1/4 ″ Crv: 4, 4.5 5, 5.5 , 6, 7, 8, 9, 10, 11, 12, 13, 14 Mm Flexible Bar 1pc 1/4 ″ Crp: 150 Mm 2 Extension Bars Crv 1/4 ″: 50, 100 Mm Universal Joint 1pc 1/4 ″ Crv Sliding Bar 1pc 1/4 ″ Crv Packing: Blow Mold Case;" " (1 Set) Accessory Set And Titanium Drill Bits Specifications: Complete Set Of 103 Pieces Includes: 9 X Metal Drill Bits (2 X 1.5, 3 X 2, 1 X 2.5, 4 X 3, 1 X 3.2, 1 X 3.5, 1 X 4, 1 X 4.5, 1 X 4.8, 1 X 5, 1 X 5.5, 1 X 6 And 1 X 7mm), 40 X 25mm Screwdriver Bits (10 X Ph (2 X 0, 2 X 1, 3 X 2 And 3 X 3mm), 10 X Pz (2 X 0, 2 X 1, 3 X 2 And 3 X 3mm) 6 X S (2 X 4, 2 X 6 And 2 X 7mm) 10 X T (2 X 10, 2 X 15, 2 X 20, 2 X 25, 30 And 40mm) 4 X H (3, 4, 5 And 6mm)) 13 X 50mm Screwdriver Bits (4 X Ph (0, 1, 2 And 3mm) 4 X Pz (0, 1, 2 And 3mm) 2 X S (4 And 6mm) 3 X T (10, 20 And 25mm)) 2 X Spade Bits (16 And 22mm), 5 X Masonry Drill Bits (4, 5, 6, 8 And 10mm) Bit Holder 4 X Holesaws (32, 38, 44 And 54mm) Hole Saw Adapter 9 X Wood Drill Bits (2 X 3, 2 X 4, 1 X 5, 1 X 6, 1 X 7, 1 X 8 And 1 X 10mm) 7 X Nut Setters (5, 6, 8, 10, 11, 12 And 13mm) Countersink And Allen Key;" " (1 Unit) Portable Monitor, 16.1 Inches Specifications: 100% Srgb; Fhd 1080p; Portable Laptop Monitor With Usb C Hdmi, Ips Eye Care Screen;" " (4 Pcs) 16gb Ddr4 3200mhz Ram Specifications: Power Supply: Vdd = 1.2v Typical Vddq = 1.2v Typical Vpp = 2.5v Typical Vddspd = 2.2v To 3.6v On-die Termination (odt) 16 Internal Banks; 4 Groups Of 4 Banks Each Bi-directional Differential Data Strobe 8 Bit Pre-fetch Burst Length (bl) Switch On-the-fly Bl8 Or Bc4(burst Chop) Height 1.34” (34mm), W/heatsink;" " (1 Set) Battery Pack - Gba 18v 4.0ah Professional - Battery Pack Specifications: Compatible With Vacuum And Blower; Battery Voltage: 18.0 V; Weight: 0.6 Kg; Battery Capacity: 4 Ah; Battery Dimensions (width X Length X Height): 74 X 114 X 56 Mm;" " (1 Set) Battery Charger - 1880 Cv Specifications: Battery Charging Voltage: 14.4 – 18 V Charge Current: 8 A Weight: 700 G In Cardboard Box Quick Charger Gal 1880 Cv1 50 Percent Faster Charging Of The Batteries Quick Charging Mode: A 4.0 Ah Battery Is Ready To Use After 25 Minutes With 80 Percent Of Its Capacity. Active Air Cooling For Longer Battery Life."