Cable Tenders

Details: Punjab & Sind Bank, Guwahati Zonal Office Invites Sealed Tenders In 2 Bids System From Reputed, Bona Fide And Intending Contractors In The Prescribed Format For Proposed Interior Furnishing, Electrical, Lan Cabling & Ac Works Of Its Proposed New Premises At Dharmanagar, North Tripura. Last Date Of Tender Document Submission 09.01.2025. No Bids Will Be Accepted After 3 Pm And All Bids Received After The Time Will Be Summarily Rejected Even Without Opening Of Technical Bids. The Bank Reserves Right To Cancel Any Or All Tenders And Stop The Process At Any Point Of Time Without Assigning Any Reason Or Notice Whatsoever. I) Bidders Can Download The Requisite Tender Documents From Our Website-www.punjabandsindbank.co.in For Any Further Clarification/query Contact-+91-7896536440 During Office Hours From 10.00 Am To 5.00 Pm Over Phone Or In Person. Zonal Manager Click Here

Description: CATEGORY: Cat Part No 61-1-61-VAL-3K0035 Bearing , Cat Part No 61-1- 61-VAL-3K0032 Bearing , Cat Part No 61-1-61-VAL-3K0001 Gear with Splines , Cat Part No 61-1-61-VAL-3H0093 Pipe Assy , Cat Part No 61-1-61-VAL- Brake Valve Assy , Cat Part No 02-200002 Liner , Cat Part No 1X0480 Hyd Pump seal , Cat Part No 9221 Gasket , Cat Part No 250843 Ring Rubber O , Cat Part No 3023994 Seat , Cat Part No 68210 Gasket , Cat Part No 150612190 Pin , Cat Part No 700003032 O Ring , Cat Part No 123107 Washer , Cat Part No 43828 Clamp Hose , Cat Part No AR32241944 Connection Fuel Drain , Cat Part No 1540314421 Spring , Cat Part No S962E Cock drain , Cat Part No 147901 Seal Cap Filter , Cat Part No 1547011140 Bolt , Cat Part No 173368 Seal , Cat Part No 158139 Element Filter , Cat Part No 1546012170 Element Filter , Cat Part No 186780 Seal , Cat Part No 164159 O Ring Cover , Cat Part No 61-1-61-VAL-10X467 Poppet , Cat Part No 61-1-61-VAL-357197X91 Elbow with O ring , Cat Part No 61-1-61-VAL-10X0480 Hand Pump Seal Kit , Cat Part No 61- 1-61-VAL-357197X91 Elbow , Cat Part No 61-1-61-VAL- 3H0150 Pump Control Bkt assy RH , Cat Part No 61-1-61- VAL-3H0151 Pump Control Bkt assy LH , Cat Part No 61-1- 61-VAL-3H0803 Auxiliary Cable , Cat Part No 61-1-61-VAL- 13B0225 Special Bolt Door , Cat Part No 61-1-61-VAL-RELAY Relay , Cat Part No 61-1-61-VAL-10X454 Element , Cat Part No 61-1-61-VAL-3H0769 Hose Assy , Cat Part No 61-1-61- VAL-3H0725 Hose Assy , Cat Part No 61-1-61-VAL-10X985 Cup Bearing , Cat Part No 02-800772 Fan Belt , Cat Part No 02-800774 V belt Pair , Cat Part No 02-800960 Fan Belt , Cat Part No 750111056 Shaft Seal , Cat Part No 581-00012 Filter Element , Cat Part No 696-00442 Bush , Cat Part No 730-01041 Relay 12V , Cat Part No 04-800153 Seal , Cat Part No 04-800277 Backing Plate , Cat Part No 04-800288 Outer Piston Seal

Description: CATEGORY: Apparatus Oxigen inhalation Portable tubing1 mtr with connector , Laryngoscope Cell for Adult Medium , Needle for Spinal Anaesthesia with luer lock fitting with styllet 22 g , Needle spinal Anaesthesia with luer lock fitting with styllet 24g SS , Needle spinal Anaesthesia with luer lock fitting with styllet 25g , Outfit venous pressure manometer Complete point , Silicon full face mask for BIPAP oblik CIPAP machine , Tube plastic mount connection , Tube Endotracheal oral with Inflatable cuff comma , Bandage Elastic Adhesive comma 6 cm X 3 metres , Dressing restore wound care occlusive and hydrocolloid dressing , Dressing Pre OP adhesive drape 50 x 45 cm , Dressing Wound 10 x 20 cm , Gauze Surgical comma Open Wove comma Unmedicated colon , Osteomy comma colostomy bags with microporous , Osteomy ileostomy bagswith skin barrier , Linear cutter reload unit blue catridge for use with safety lock out 75 mm , Linear cutter reload unit blue catridge for use with safety lock out 55 mm , Blue Monofilamant polyglyconate size 4 , Blue Monofilamant polyglyconate size 6 oblik 0 , Polypropylene Mesh 15cm x 15 cm me polygalactin 910 , polupropyline mesh 6cm x 11 cm box of 6 , Silk Braided S 1 oblik 0 reel 6 reelx 25 mtr , Silk Braided 2 oblik 0 comma Reel 6 Reel x 25 mtr , Silk braided 4 oblik 0 comma 70 76 cm RB 1 oblik 2 circle needle 20 25 mm , Mac Conkey agar , TMS Comfort Face Masks box of 50 , High pressure 3 way stop cock connector , Peritoneal Dailysis catheter adult , Set plasma blood saline giving plastic disp pre sterilised , Serum Anti D IgG , Fibrin glue 1ml containing colon Fibrinogen 70 110 mg comma , Adhesive incise Drape 25X30 cm , Adhesive Incise Drape 5X15 cm , Double Lumen Catheter Cannula with Guide wire comma , Dispo Shoe cover , Laryngoscope Adult bulb for , Laryngoscope Infant bulb for , Laryngoscope cell 1 point 5 V dia 13 mm , Operating pack containing sheet large 3 comma trolley cover 3 comma surgeon gown 4 , Patient ECG Cable Compatible with monitor , Pressure Infusion Bag 500 ml , Pressure Infusion Bag 1000 ml , Rapid infusion set , Short Leadercath 20FG 8 to 10 cm long with introducer needle and guidewire , Transducer holder disposable , ube duodenal solid tip 125 cm 4 eyes graduated ch 14 , Tube corrugated PVC 105cm long with connection , ube duodenal solid tip 125 cm 4 eyes graduated ch 15 , Tube duodenal solid tip 125 cm 4 eyes graduated ch 18 , Tube tracheostomy with inflatable cuff size 27 FG , Tube tracheostomy with inflatable cuff size 30 FG , Tube tracheostomy with inflatable cuff size 33 FG , Tube tracheostomy with inflatable , Tube Tracheostomy with inflatable cuff size 39 FG , Needle comma suture comma cutting comma curved comma , Needle comma suture comma cutting comma half circle comma triangular pointed certified

Details: Description Beyond •mic: Built-in •output Format: Mjpeg Or More •frame Rate: 30fps Or Higher •usb: 2.0 Or More •quantity: 5 Units •warranty: 1 Year Or More 2. Hdmi Cable •type: Standard Hdmi Male (male To Male) •version: 2.0 Hdmi Cable •supports: Video/audio •resolution: 1080p 60hz Or Higher •length: 10 Meters Or Longer •compatibility: Hd Tvs, Hdmi Devices •warranty: 30 Days Replacement Factory Defect Or More 3. Teleconference Device With Expansion •microphone And Peripheral Equipment Equivalent Or Higher Technology •microphone: Integrated Microphone With 3 Beamforming Elements •microphone Pickup Range: 4 M •expansion Microphone: 5 M •microphone Frequency Response: 90hz-16khz For Full Voice Reproduction And High Intelligibility Without Noise And More •speaker: Volume Adjustable To 95 Db Spl At ½ Meter Peak Or More •operating System Compatibility: Windows 10, Windows® 11 Or Later, Macos (two Most Recent Versions) •compatibility And Integrations: Plug-and-play Usb, Microsoft Applications And More •package Contents: Expansion Microphone And Peripherals Equipment, Conference Cam, Remote Control, Usb 2.0 Minimum Of 5 M, Power Supply, Wall Mount And Hardware, User Documents •warranty: 1 Year Or More Hardware Replacement And Support 4. Projector With Projection Screen •projector: 5,000 Lumens Or Greater •projection Method: Digital Light Processing (dlp) Or Higher Technology •maximum Resolution: 1920x1200 Dpi Or Greater •projection Screen: Standard Screen Size With Bracket Stand Tripod For Projector •warranty: 1 Year Or More 5. External Hard Drive Storage •type: Plug And Play, Portable Solid-state Drive (ssd) Storage •capacity: 8 Tb Or More •port: Usb •compatibility: Desktop, Laptop, And Server •warranty: 1 Year Or More 6. Internal Ssd •type: Sata Solid-state Drive (ssd) Storage •capacity: 512gb Or Greater •warranty: 1 Year Or More 7. Dual Bay Dock Station With Power Adapter •type: Plug And Play •supports: Offline Clone Function, Hot Swap •connections: Dual Bay •dock Access: 2 Drives Simultaneously (up To 2x16 Tb) •light Indicator: Power And Activity Status •data File Transfer: Super Speed Usb 3.0 (5gbps/420mb/s Or More), Downward Compatible With Usb 2.0/1.1 •compatibility: Hard Disk Drive (hdds) / Solid-state Drives (ssds) •port: Usb, Power Adapter •included In The Box: 1 X Usb-b To Usb-a Cable, 1 X Power Adapter 12v/3a, 1 X Usb-a To Usb-c Adapter, 1 X Quick Start Guide Or More •warranty: 1 Year Or More 8. Labeler •keyboard: Qwerty •display: Larger Lcd •features And Benefits: •large 13-character Display Or More With Print •preview For Editing Label Before Printing •exclusive Graphical Display Lets You To •see Font Effects On Screen Before You Print •navigation Buttons For Easy Access To •advanced Features •9 Label Memory Or Greater, Minimum Of 2-line Printing, 5 Font Sizes Or More, 8 Box Styles And Underline Or More, 7 Print Styles Or More, Auto-off Power Saver, Date Function, English Language Or More •inclusion: Batteries And Ac Adapter •paper Size Output: ½” X 13’ | 12mm X 4m 9. Labeler Paper •white Labeler Paper Size: ½” X 13’ | 12mm X 4m •usage: Fully Compatible With The Labeler Ordered As Is •1 Year Or More 10. Heavy Duty Gun Tacker •power: High/low Switch •length: 14mm Or Greater 11. External Hard Drive Storage •plug And Play, Portable Solid-state Drive (ssd) Storage •capacity: 1 Tb Or More •port: Usb •compatibility: Desktop, Laptop, And Server •warranty: 1 Year Or More 12. Cordless Electric Screwdriver •type: Brushless Cordless Impact Drill 29 Pieces Cordless Electric Impact Battery Drill Screwdriver Set Woodworking, All Metal Chuck, 1/2” All Metal Keyless Ratcheting Chuck •speed: 0-350/0-1350r/min •torque:18-80n.m •collet: 10mm (with Shaft Lock, Collet With Self-lock) •motor: Brushless Motor •voltage: Dc 20v •three Working Modes: Impact, Flat Drilling, Screw Turning •lighting: Automatic On When Electric Drill Is Working •battery Core Type: Li-ion (lithium-ion) •drill Type: Hammer Drill •gears: 20 Or More •patterns: 3 (screwdriver, Drill, Impact Mode) •switch: 2 Speed One Click High And Low, High Gear For Drilling Or Grinding, Low Gear For Disassembly And Assembly Of Screws •rotation: Clockwise And Counterclockwise, Forward And Reverse Switching •power Tool Feature: Waterproof, Led Light, Bag Included, Brushless, Case Included, Keyless Chuck, Mobile App Integration •tool Compatible With Surfaces: Plastic, Glass, Ceramic, Masonry, Wood, Metal, Drywall •package Include: 1 X Cordless Electric Drill (not Including Battery), 2 X Lithium-ion Battery, 25 X Drill/driver Bit, 1 X Suitcase (tool Box), 1 X English User Manual •spare Battery: 1 X Lithium-ion Battery •warranty: Minimum Of 1 Year Hardware Replacement Or More

Details: Description Invitation To Bid For The Provision Of Supplies And Materials For The Installation Of Networking Connection In Computer Laboratory Public Bidding No. 2025-shs-015 Funding Source: Government Of The Philippines Through General Appropriations Act (gaa) Fy 2025. 1. The Procurement Service Invites Philgeps Registered Suppliers To Bid For The Following Items: Provision Of Supplies And Materials For The Installation Of Networking Connection In Computer Laboratory Estimated Budget ------------20,000.00 Provision Of Supplies And Materials For The Installation Of Networking Connection In Computer Laboratory Quantity Item Description Unit Estimated Unit Cost Estimated Cost 1 Utp Cable Cat 6 Box 1,850.00 1,850.00 2 Rj45 Pass Through Box 500.00 1,000.00 2 Switch Hub (for Network) 24 Ports Unit 3,900.00 7,800.00 3 Switch Hub (for Students) 4 Ports Pcs 599.00 1,797.00 3 Router (for Students) Pcs 699.00 2,097.00 1 Ssd Storage (for Server Os) 500gb Unit 1,928.00 1,928.00 1 Ssd Storage (for File Storage) 1tb Unit 2,928.00 2,928.00 3 Cable Tray Duct 67 Inches Pcs 200.00 600.00 2. The Summary Of The Bidding Activities Is As Follows: Posting Of Invitation To Bid December 18, 2024 Issuance And Availability Of Bid Documents December 20, 2024 Pre-bid Conference December 26, 2024 Last Day Of Submission Of Written Clarification December 27, 2024 Last Day Of Issuance Of Bid Bulletin January 2, 2025 Deadline For Submission January 7, 2025 Opening Of Bids Immediately After The Deadline Of Submission Of Bids 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. 4. Bidding Is Restricted To Filipino Citizens / Sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. 5. Interested Bidders May Obtain Further Information From The Procurement Service And Inspect The Bidding Documents At The Address Given Below During Office Hours. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders From Villacin National High School At Bac Office., And Upon Payment Of A Nonrefundable Fee For The Bidding Documents, In Amounts Pursuant To The Schedule. 6. Bid Opening Shall Be Conducted On January 7, 2025, 10:00am, Villacin National High School At The Bac Office Located In Brgy. Tinampaan, Cadiz City, Negros Occidental. Bids Shall Be Opened In The Presence Of The Bidder’s Representatives Who Choose To Attend The Opening. Late Bids Shall Not Be Accepted. Unsealed Or Unmarked Bid Envelopes Shall Be Rejected Also. 7. Bidders Shall Drop Their Duly Accomplished Eligibility Requirements, Technical And Financial Proposals In Two Separate Sealed Envelopes In The Designated Bid Box Located At The Bidding Room. 8. The Procurement Service Reserves The Right To Accept Or Reject Any Bid, To Annual The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 9. For Further Inquiries, Please Look For Noel R. Bullos, Bac Secretariat, Or Feel Free To Call At +63-947-3668161 And Email At Vnhs.shs@gmail.com Nelly S. Echavez Chairperson Bids And Awards Committee

Details: Description Submersible Pump 1 Hp Complete W/ Model 25gs10 Stainless Steel Bowl Impeller Built-in Check Valve Complete W/ Submersible Motor 230 Volts And Control Box 3 Units Submersible Pump 1.5 Hp Complete W/ Model 25gs15 Stainless Steel Bowl & Impeller Built-in Check Valve Complete W/ Submersible Motor 230 Volts And Control Box 2 Units Submersible Pump 2 Hp Complete W/ Model 25gs20, Stainless Steel Bowl & Impeller Built-in Check Valve Complete W/ Submersible Motor 230 Volts And Control Box 1 Units Control Panel Box 2 Units 1.5 Hp 230 Volts W/ Voltage Monitor & Water Level Sensor 1 Set Discharge Plate 1 1/4” 2 Pcs. Discharge Check Valve 1 1/4” 2 Pcs P.e Saddle Clamp 2” X ½” 100 Pcs. P.e Saddle Clamp 1 1/2” X ½” 100 Pcs P.e Pipe 2” S 11/4” 20 Rolls P.e Pipe 11/2” Sdr9 10 Rolls Float Switch 230 Volts 3 Pcs P.e Coupling 2” 20 Pcs P.e Coupling 1 1/2” 10 Pcs G.i Elbow 1 1/4” 2 Pcs Teflon ½” 1 Box Hack Saw Blade 1 Box Ppr Pipe 1 1/4” (riser Pipe) 12 Pcs Ppr Coupling 1 1/4” 12 Pcs. Adaptor 1 1/4” 4 Pcs P.e Adaptor 1 1/4” 10 Pcs Suspension Wire #18 160 Ft. Submersible Cable #12/3c 160 Ft.

Details: The Town Of Mahone Bay Is Currently Interested In Receiving Bids For Contract No. 241016.00 - Edgewater Street Improvements. The Project Is Located In The Town Of Mahone Bay On Edgewater Street And Surrounding Coastlines. The Project Generally Involves Infrastructure Improvements And Coastline Protection. The Work Includes But Is Not Necessarily Limited To Various Site Removals; Supply And Installation Of Sanitary, Water, And Storm Sewer Piping; Supply And Installation Of Hydrants, Water And Sanitary Services, A Pedestrian Footbridge, Construction Of Two (2) Sanitary Pumping Stations; Road And Trail Paving Complete With Signage, Lookoff Areas, A Parking Lot, Driveways, Curbs, Sidewalks, Retaining Walls, Handrails, And Pedestrian Ramps; Underground Electrical Including Medium-voltage And Secondary Services, With Associated Distribution Infrastructure; Street Lighting And Associated Cables, Supports, Fittings, Conduits; Shoreline Protection Including Three (3) Breakwaters And Continuous Rock Protection; Supply, Placement And Maintenance Of Topsoil And Sod As Well As Other Plantings; Environmental Protection; Traffic Control;

Details: Description Republic Of The Philippines Province Of Negros Oriental Municipality Of Bindoy Bids And Awards Committee Bindoylgubac@gmail.com Invitation To Bid For Purchase And Installation Of Solar Power System, Brgy. Poblacion, Bindoy, Negros Oriental, Bindoy, Negros Oriental The Municipality Of Bindoy, Through The Local Disaster Risk Reduction Management Office 70% Of The 5% Fund Intends To Apply The Sum Of Two Million Five Hundred Thousand Pesos & /100 (2,500,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Purchase And Installation Of Solar Power System, Brgy. Poblacion, Bindoy, Negros Oriental. Bids Received More Than The Abc Shall Be Automatically Rejected At Bid Opening. The Municipality Of Bindoy Through Its Bids And Awards Committee (bac), Now Invites Bids From Eligible Bidders Of Purchase And Installation Of Solar Power System, Brgy. Poblacion, Bindoy, Negros Oriental. On January 6, 2025. Item Description Quantity 1 Solar Panels 550watts, Monocystalline 64.00 2 Hybrid Inverter, 16kw, 3-mmpt Trackers, 1 Single Phase, 48v- 51.2vdc/220vac(on/off Grid) 2.00 3 Power Wall Battery System Lifepo4 (51.2v X/200ah) 15.36kw-hr 3.00 4 Battery Combiner W/ Rated 225a Bus Bar 2.00 5 Railings 2.4 Meters, Aluminum Hd 98.00 6 L-foot/t-foot, Alluminum 340.00 7 Rail Joiner/splice Kit 58.00 8 Mid Clamp, Alluminum 100.00 9 End Clamp, Alluminum 80.00 10 Ground Logs, Alluminum 8.00 11 Combiner Box 24 Ways Ip 66 2.00 12 Combiner Box 12 Ways Ip 66 4.00 13 Combiner Box 8 Ways 4.00 14 Isolator Dc 4.00 15 Isolator Ac 4.00 16 Pv Cables (duplex) 6mm (w/6mm Stranded Conductor) 4.00 17 Pv-dc Cable (6mm Single Wire Black Red) 2.00 18 Dc Spd 8.00 19 Ac Spd 8.00 20 Dc Breakers 32a 8.00 21 Dc Breakers 25a 8.00 22 Dc Breakers 250a 4.00 23 Ac Breakers 63a 2.00 24 Ac Breakers 32a 4.00 25 C Battery Cable 35/ 50mm (black) 15.00 26 Battery Cable 35/50 Mm (red) 15.00 27 Battery Logs 50 Mm 20.00 28 Mechanical Timer 2.00 29 Wiring Duck 3" (inches) 10.00 30 Aluminum Duck 4"(inches) 4.00 31 Mc- 4 Connectors W/ Wire Ferrules 85.00 32 Mts/ Ats- Heavy Duty Set-auto)/ Manual 250a 1.00 33 Y-delta Box 6x15 X18 4.00 34 Y-delta Box 6x12 X12 4.00 35 Liquid Tight Flexible Hose 1/2 150.00 36 Liquid Tight Flexible Hose No. 1 50.00 37 Liquid Tight Flexible Hose Adaptor 1/2 12.00 38 Liquid Tight Flexible Hose Adaptor 1 12.00 39 Thhn No. 22mm (white) 70.00 40 Thhn No. 22mm (black) 70.00 41 Nema 3-r With 60a Ge Breaker (size: 4x6x9) 6.00 42 Circuit Breakers 70a 6.00 43 Thhn No. 3.5mm (green) 150.00 44 Ground Clamp No. 5/8 4.00 45 Ground Rod 1/ 2 (galvanized Or Brass) 2.00 46 Cooling Fan 10" /c10" 2.00 47 Vulcaseal / Sealant 8.00 48 Toks (3/8 X 1) 4.00 49 Electrical Tape 3m/ Armak 8.00 50 Gi Pipe No. 2 / 40 10.00 51 Secondary Rack (5 Spool) 10.00 52 Cement 10.00 53 Acsr No 4. Insulated (allu) Single 300.00 54 Wire Holder No. 4 60.00 55 Round Bar No. 10mm 10.00 56 Welding Rod 8.00 57 Cement 20.00 58 Sand & Gravel 6.00 59 Boulders 2.00 60 Hardiflex/hardiboard 1/ 4 10.00 61 Marine Plywood 3/ 4 4.00 62 Marine Plywood 1/2 4.00 63 Angle Bar 2 X 3/16 10.00 64 Angle Bar 1 & 1/2 X 3/16 X 3/16 10.00 65 Deform Bar No. 10 Mm 8.00 66 Deform Bar No. 9 Mm 10.00 67 Glass Door Assy Standard 1.00 68 Roof / Superlum No. 0.4 4.00 Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non- Discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. The Bids And Awards Committee Will Hold A Pre-bid Conference On December 23, 2024, At Mpdc Office, Which Shall Be Open To Prospective Bidders A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 9, 2024 – January 06, 2025 @ 9:00am – 5:00pm From The Bac Secretariat Upon Payment Of The Applicable Fee For The Bidding Documents, Of Five Thousand Pesos Only (p5,000.00). Bids Must Be Duly Received By The Bac Secretariat At The Address Below On Or Before December 9, 2024 – January 06, 2025 At 1:30pm. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause Error! Reference Source Not Found.. Bid Opening Shall Be On January 6, 2025 At 2:00pm At The Office Of The Municipal Planning And Development Officer. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. The Municipality Of Bindoy Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Roberto L. Amaro, Enp Bac Chairman Municipal Planning And Development Office Poblacion, Bindoy, Negros Oriental Mobile Contact Nos. 09274958041

Details: Description Inclusion/deliverables: 1. 1 Unit 55” Led Monitor Tv With Wall Bracket 2. 1 Unit 32 Channel Dvr Recorder 3. 2 Units Cctv Hard Disk 4tb 4. 32 Units Ccctv Bullet/dome Camera 5. 3 Rolls Utp Cable Cat 6 Outdoor 6. 1 Set Psu Box Power Supply 40amp 7. 3 Sets Psu Box Power Supply 20amp 8. 1 Set Psu Box Power Supply 10amp 9. 32 Pieces Cctv White Junction Box 100x100x70mm 10. 5 Pieces Cctv White Junction Box 150x110x70mm 11. 32 Sets Cctv Video Balun 8mp 12. 32 Sets Dc Plug Balun Male & Female 13. Other Hardware And Electrical Supplies & Materials Scope Of Work: 1. Site Survey And Assessment: Conduct A Thorough Site Survey To Determine The Layout, Size, And Specific Security Needs Of The Premises. Identify High-risk Areas, Points Of Entry/exit, Blind Spots, And Areas Requiring Special Surveillance Attention. Evaluate Existing Infrastructure For Compatibility With Cctv Installation. 2. System Design And Layout: Develop A Comprehensive Cctv System Design Based On The Site Survey Findings. Determine Camera Placements, Angles, And Coverage Areas To Ensure Maximum Surveillance Effectiveness. Select Appropriate Camera Types (e.g., Dome Cameras, Bullet Cameras) Based On Specific Surveillance Requirements. Design Network Infrastructure For Seamless Camera Connectivity And Data Transmission. 3. Equipment Procurement: Procure High-quality Cctv Cameras, Recording Devices, Monitors, Cables, And Other Necessary Equipment From Reputable Suppliers. Ensure Compatibility And Compliance With Industry Standards And Regulations. Obtain Quotes And Compare Prices To Ensure Cost-effectiveness Without Compromising Quality. 4. Installation And Integration: Install Cctv Cameras At Designated Locations As Per The Approved System Design. Mount Cameras Securely And Adjust Angles For Optimal Coverage. Integrate Cctv Cameras With Recording Devices, Monitors, And Existing Security Systems (if Applicable). Configure Network Settings For Remote Access And Monitoring Capabilities. 5. Testing And Commissioning: Conduct Thorough Testing Of All Cctv Components To Ensure Proper Functionality. Verify Camera Angles, Image Quality, Motion Detection, And Recording Capabilities. Test Remote Access And Monitoring Features To Ensure Seamless Operation. Address Any Issues Or Discrepancies Identified During Testing. 6. Training: Provide Comprehensive Training Sessions For Designated Personnel On Cctv System Operation, Monitoring, And Basic Troubleshooting. Ensure Staff Members Are Proficient In Accessing And Using Cctv Footage Effectively. Conduct A Formal Handover Of The Cctv System To The Client, Ensuring All Deliverables Are Met And Expectations Are Fulfilled. Timeline: The Estimated Timeline For Completion Of The Project Is 3-5 Days, Subject To Adjustments Based On Site Conditions, Equipment Availability, And Client Feedback. Budget: The Proposed Budget For The Project Is P 270,000.00, Inclusive Of Tax, Equipment (supplies, Tools & Materials) Procurement, Installation, Training.

Details: Description Inclusion/deliverables: 1. 1 Unit 55” Led Monitor Tv With Wall Bracket 2. 1 Unit 32 Channel Dvr Recorder 3. 2 Units Cctv Hard Disk 4tb 4. 32 Units Ccctv Bullet/dome Camera 5. 3 Rolls Utp Cable Cat 6 Outdoor 6. 1 Set Psu Box Power Supply 40amp 7. 3 Sets Psu Box Power Supply 20amp 8. 1 Set Psu Box Power Supply 10amp 9. 32 Pieces Cctv White Junction Box 100x100x70mm 10. 5 Pieces Cctv White Junction Box 150x110x70mm 11. 32 Sets Cctv Video Balun 8mp 12. 32 Sets Dc Plug Balun Male & Female 13. Other Hardware And Electrical Supplies & Materials Scope Of Work: 1. Site Survey And Assessment: Conduct A Thorough Site Survey To Determine The Layout, Size, And Specific Security Needs Of The Premises. Identify High-risk Areas, Points Of Entry/exit, Blind Spots, And Areas Requiring Special Surveillance Attention. Evaluate Existing Infrastructure For Compatibility With Cctv Installation. 2. System Design And Layout: Develop A Comprehensive Cctv System Design Based On The Site Survey Findings. Determine Camera Placements, Angles, And Coverage Areas To Ensure Maximum Surveillance Effectiveness. Select Appropriate Camera Types (e.g., Dome Cameras, Bullet Cameras) Based On Specific Surveillance Requirements. Design Network Infrastructure For Seamless Camera Connectivity And Data Transmission. 3. Equipment Procurement: Procure High-quality Cctv Cameras, Recording Devices, Monitors, Cables, And Other Necessary Equipment From Reputable Suppliers. Ensure Compatibility And Compliance With Industry Standards And Regulations. Obtain Quotes And Compare Prices To Ensure Cost-effectiveness Without Compromising Quality. 4. Installation And Integration: Install Cctv Cameras At Designated Locations As Per The Approved System Design. Mount Cameras Securely And Adjust Angles For Optimal Coverage. Integrate Cctv Cameras With Recording Devices, Monitors, And Existing Security Systems (if Applicable). Configure Network Settings For Remote Access And Monitoring Capabilities. 5. Testing And Commissioning: Conduct Thorough Testing Of All Cctv Components To Ensure Proper Functionality. Verify Camera Angles, Image Quality, Motion Detection, And Recording Capabilities. Test Remote Access And Monitoring Features To Ensure Seamless Operation. Address Any Issues Or Discrepancies Identified During Testing. 6. Training: Provide Comprehensive Training Sessions For Designated Personnel On Cctv System Operation, Monitoring, And Basic Troubleshooting. Ensure Staff Members Are Proficient In Accessing And Using Cctv Footage Effectively. Conduct A Formal Handover Of The Cctv System To The Client, Ensuring All Deliverables Are Met And Expectations Are Fulfilled. Timeline: The Estimated Timeline For Completion Of The Project Is 3-5 Days, Subject To Adjustments Based On Site Conditions, Equipment Availability, And Client Feedback. Budget: The Proposed Budget For The Project Is P 270,000.00, Inclusive Of Tax, Equipment (supplies, Tools & Materials) Procurement, Installation, Training.