Cable Tenders

Description: This Is A Request For Information (rfi) Only. There Is No Solicitation Package Available. the Naval Air Warfare Center, Aircraft Division (nawcad) Lakehurst, Nj Is Issuing This Request For Information Notice To Conduct Market Research To Identify Potential Sources And Request Information For A Potential Procurement Of Rack Mounted Analog Discrete Input Measurement Instruments For The Engine Test Instrumentation Replacement System (etirs). The Instrumentation Must Meet Various Functions, And Each Instrument Can Fulfill One Or Multiple Functional Requirements. this Is A Request For Information Only – Not A Request For Proposal. This Rfi Is Issued For The Purpose Of Determining Market Interest, Feasibility, And Capability Of Sources And Does Not Constitute A Request For Proposal Or Commitment By The Government. this Rfi Is Issued Sole For The Market Research Information And Planning Purposes And Does Not Constitute A Solicitation.  information Herein Is Based On The Best Information Available At The Time Of Publication, Is Subject To Revision, And Is Not Binding Upon The Government.  no Reimbursement Will Be Made Of Any Costs To Provide Information In Response To This Rfi Or Any Follow-up Information Requests. this Rfi Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Meeting The Requirements Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract.  navair Is Requesting Information On The Industry’s Capability Of Manufacturing Commercial Off The Shelf (cots) Or Modified Cots (mcots) Rack Mounted Torque Meter Instruments That Meet Or Exceed The Requirements Below. the Rack Mounted Torque Meter Instruments Shall Meet Or Exceed The Performance/environmental Requirements Shown In The Following Functional Breakdown: instrumentation Performance Requirements torque Meter Requirements ** Refer To The Tables In The Attached Instrumentation Characteristics Excel File For All Performance Requirements. The Performance Specification Is Export-controlled. In Order To Receive A Copy Of The Performance Specification Interested Respondents Must Be U. S. Dod Contractors. Interested Respondents Must Provide The Contracting Office Point Of Contact Identified Below With A Copy Of Their Current, Approved Form Dd2345, 'militarily Critical Technical Data Agreement'. Once Received And Current Jcp Certification Verified By Navair, The Draft Performance Specification Will Be Transmitted To You From Navair Via The Dod Safe System, To The Data Custodian You Have Identified On The Dd Form 2345. Contractors Must Request The Draft Performance Specification In Writing From Mr. Terrence Shearer, Terrence.d.shearer.civ@us.navy.mil. acquisition Instrumentation Environmental Requirements the System’s Equipment Design, Located Outside The Instrument And Control Room (i&c Cab), Shall Meet Class 1 Environmental Requirements As Defined In Table 2 Of Mil-prf-28800. the System’s Equipment, Within The Instrument And Control Room (i&c Cab) Boundary, Design Shall Meet The Temperature And Humidity Requirements Of Class 4 Equipment In Section 3.9.2 Of Mil-prf-28800. the System Shall Be Fully Operational During The Expected Shipboard Deck Environmental Vibration Levels As Described Per Mil-std-167-1a, Type 1 - Environmental Vibration. the System’s Equipment Design Shall Comply With The Requirement Matrix For Navy Surface Ships And Navy Ground In Table 5 Of Mil-std-461 Or Equivalent. cs115 (conducted Susceptibility, Bulk Cable Injection, Impulse Excitation) And Cs118 (personnel Borne Electrostatic Discharge) Are Specified As Applicable. navair Is Requesting The Following Information From Industry Vendors To Demonstrate How They Can Meet The Requirements Listed Above: vendor Capability. vendor Capacity. documentation Demonstrating That The Vendor Is Capable Of Manufacturing Cots And/or Modified Cots Rack Mounted Torque Meter Instruments. Documentation Demonstrating That The Vendor Is Capable To Sustain The Product. any Information On Past Performance Of Similar Efforts. a Technical Data Sheet Describing The Electrical And Performance Characteristics Of The Instruments. the Vendors May Also Respond With A Presentation Of 5 Slides Or Less With A Specific Focus On Explanation Of Data Sheets And Instrument Performance In Relation To Gfi Requirements. navair Is Requesting The Following Information From Industry Vendors To Comprehend The Logistics Impacts Associated To Each Instrument: how Long Will The Product Be Supported For Procurement And Repair? does The Product Require Calibration? if So, Does The Product Require Additional Equipment/tools To Calibrate? all Interested Parties Should Have The Following: a Quality Assurance Program Compliant With Iso9001 Or Equivalent. test Data Demonstrating That The Above Performance And Environmental Requirements Have Been Met With The Proposed Rack Mounted Torque Meter Instruments. acquisition Instrumentation Software Requirements instrumentation Shall Be Able To Be Controlled Through An Application Programming Interface (api) By Software Code Running On The Test Bench. Navair’s Preferred Apis Are Those Standardized Interfaces Defined And Managed By The Interchangeable Virtual Instrument (ivi) Foundation (https://www.ivifoundation.org) Including The Following: vxi Plug & Play standard Commands For Programmable Instrumentation (scpi) virtual Instrument Software Architecture (visa) interchangeable Virtual Instrument (ivi) all Interested Parties Should Respond With Their Compliance With The Above Apis For Each Potential Offering. If A Vendor’s Instrument Is Not Compliant With The Above Apis, They Should State So And, Instead, Provide An Overview Of How To Programmatically Control Their Instrument, Including Any Required Drivers, Applications, Programming Languages, Operating Systems, Or Third-party Tools. in Addition To Expressing Interest And Providing The Requested Information, Include Estimated Price Details. The Government Is Seeking Unit Price And Lead Time For Each Type Of Rack Mounted Data Acquisition Instrument Type. Brochures, Manufacturing Capability And Capacity, And Past Performance Information May Be Included In The Rfi Response. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics Code Assigned To This Notice. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In This Rfi In Order To Assist The Government’s Capability Determination.  far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance.  Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far).   interested Sources Should Provide Rfi Responses And Related Data To The Pocs Identified Below, No Later Than 30 Days After The Post Date Of This Rfi. All Information Sent Should Reference This Rfi Number On The Subject Response Line Of The Emailed Response As Well As On All Enclosed Documents. Responses Must Include The Company Name, Address, Point Of Contact Name And Email/phone, And Company Size. Proprietary Data Must Be Marked On A Page-by-page Basis And Will Be Kept Confidential And Protected Where So Designated. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Rfp That May Be Issued. Any Comments Provided May Or May Not Be Included In A Formal Solicitation. Respondents May Provide Information And Rough Orders Of Magnitude (rom) On Any Currently Available Product Or A Company's' Capabilities That Will Meet The Navy's Requirements. responses Must Be Received No Later Than December 16th 2024 By 4pm Est.

Description: This Is A Request For Information (rfi) Only. There Is No Solicitation Package Available. the Naval Air Warfare Center, Aircraft Division (nawcad) Lakehurst, Nj Is Issuing This Request For Information Notice To Conduct Market Research To Identify Potential Sources And Request Information For A Potential Procurement Of Rack Mounted Analog Discrete Input Measurement Instruments For The Engine Test Instrumentation Replacement System (etirs). The Instrumentation Must Meet Various Functions, And Each Instrument Can Fulfill One Or Multiple Functional Requirements. this Is A Request For Information Only – Not A Request For Proposal. This Rfi Is Issued For The Purpose Of Determining Market Interest, Feasibility, And Capability Of Sources And Does Not Constitute A Request For Proposal Or Commitment By The Government. this Rfi Is Issued Sole For The Market Research Information And Planning Purposes And Does Not Constitute A Solicitation.  information Herein Is Based On The Best Information Available At The Time Of Publication, Is Subject To Revision, And Is Not Binding Upon The Government.  no Reimbursement Will Be Made Of Any Costs To Provide Information In Response To This Rfi Or Any Follow-up Information Requests. this Rfi Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Meeting The Requirements Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract.  navair Is Requesting Information On The Industry’s Capability Of Manufacturing Commercial Off The Shelf (cots) Or Modified Cots (mcots) Rack Mounted Arinc-429 Communication Instruments That Meet Or Exceed The Requirements Below. the Rack Mounted Arinc-429 Communication Instruments Shall Meet Or Exceed The Performance/environmental Requirements Shown In The Following Functional Breakdown: instrumentation Performance Requirements arinc-429 Communication Performance Requirements ** Refer To The Tables In The Attached Instrumentation Characteristics Excel File For All Performance Requirements. The Performance Specification Is Export-controlled. In Order To Receive A Copy Of The Performance Specification Interested Respondents Must Be U. S. Dod Contractors. Interested Respondents Must Provide The Contracting Office Point Of Contact Identified Below With A Copy Of Their Current, Approved Form Dd2345, 'militarily Critical Technical Data Agreement'. Once Received And Current Jcp Certification Verified By Navair, The Draft Performance Specification Will Be Transmitted To You From Navair Via The Dod Safe System, To The Data Custodian You Have Identified On The Dd Form 2345. Contractors Must Request The Draft Performance Specification In Writing From Mr. Justin Panecki, Justin.p.panecki2.civ@us.navy.mil. acquisition Instrumentation Environmental Requirements the System’s Equipment Design, Located Outside The Instrument And Control Room (i&c Cab), Shall Meet Class 1 Environmental Requirements As Defined In Table 2 Of Mil-prf-28800. the System’s Equipment, Within The Instrument And Control Room (i&c Cab) Boundary, Design Shall Meet The Temperature And Humidity Requirements Of Class 4 Equipment In Section 3.9.2 Of Mil-prf-28800. the System Shall Be Fully Operational During The Expected Shipboard Deck Environmental Vibration Levels As Described Per Mil-std-167-1a, Type 1 - Environmental Vibration. the System’s Equipment Design Shall Comply With The Requirement Matrix For Navy Surface Ships And Navy Ground In Table 5 Of Mil-std-461 Or Equivalent. cs115 (conducted Susceptibility, Bulk Cable Injection, Impulse Excitation) And Cs118 (personnel Borne Electrostatic Discharge) Are Specified As Applicable. navair Is Requesting The Following Information From Industry Vendors To Demonstrate How They Can Meet The Requirements Listed Above: vendor Capability. vendor Capacity. documentation Demonstrating That The Vendor Is Capable Of Manufacturing Cots And/or Modified Cots Rack Mounted Arinc-429 Communication Instruments. Documentation Demonstrating That The Vendor Is Capable To Sustain The Product. any Information On Past Performance Of Similar Efforts. a Technical Data Sheet Describing The Electrical And Performance Characteristics Of The Instruments. the Vendors May Also Respond With A Presentation Of 5 Slides Or Less With A Specific Focus On Explanation Of Data Sheets And Instrument Performance In Relation To Gfi Requirements. navair Is Requesting The Following Information From Industry Vendors To Comprehend The Logistics Impacts Associated To Each Instrument: how Long Will The Product Be Supported For Procurement And Repair? does The Product Require Calibration? if So, Does The Product Require Additional Equipment/tools To Calibrate? all Interested Parties Should Have The Following: a Quality Assurance Program Compliant With Iso9001 Or Equivalent. test Data Demonstrating That The Above Performance And Environmental Requirements Have Been Met With The Proposed Rack Mounted Arinc-429 Communication Instruments. acquisition Instrumentation Software Requirements instrumentation Shall Be Able To Be Controlled Through An Application Programming Interface (api) By Software Code Running On The Test Bench. Navair’s Preferred Apis Are Those Standardized Interfaces Defined And Managed By The Interchangeable Virtual Instrument (ivi) Foundation (https://www.ivifoundation.org) Including The Following: vxi Plug & Play standard Commands For Programmable Instrumentation (scpi) virtual Instrument Software Architecture (visa) interchangeable Virtual Instrument (ivi) all Interested Parties Should Respond With Their Compliance With The Above Apis For Each Potential Offering. If A Vendor’s Instrument Is Not Compliant With The Above Apis, They Should State So And, Instead, Provide An Overview Of How To Programmatically Control Their Instrument, Including Any Required Drivers, Applications, Programming Languages, Operating Systems, Or Third-party Tools. in Addition To Expressing Interest And Providing The Requested Information, Include Estimated Price Details. The Government Is Seeking Unit Price And Lead Time For Each Type Of Rack Mounted Data Acquisition Instrument Type. Brochures, Manufacturing Capability And Capacity, And Past Performance Information May Be Included In The Rfi Response. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics Code Assigned To This Notice. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In This Rfi In Order To Assist The Government’s Capability Determination.  far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance.  Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far).   interested Sources Should Provide Rfi Responses And Related Data To The Pocs Identified Below, No Later Than 30 Days After The Post Date Of This Rfi. All Information Sent Should Reference This Rfi Number On The Subject Response Line Of The Emailed Response As Well As On All Enclosed Documents. Responses Must Include The Company Name, Address, Point Of Contact Name And Email/phone, And Company Size. Proprietary Data Must Be Marked On A Page-by-page Basis And Will Be Kept Confidential And Protected Where So Designated. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Rfp That May Be Issued. Any Comments Provided May Or May Not Be Included In A Formal Solicitation. Respondents May Provide Information And Rough Orders Of Magnitude (rom) On Any Currently Available Product Or A Company's' Capabilities That Will Meet The Navy's Requirements. responses Must Be Received No Later Than December 16th, 2024 By 4pm Est.

Description: This Is A Request For Information (rfi) Only. There Is No Solicitation Package Available. the Naval Air Warfare Center, Aircraft Division (nawcad) Lakehurst, Nj Is Issuing This Request For Information Notice To Conduct Market Research To Identify Potential Sources And Request Information For A Potential Procurement Of Rack Mounted Analog Discrete Input Measurement Instruments For The Engine Test Instrumentation Replacement System (etirs). The Instrumentation Must Meet Various Functions, And Each Instrument Can Fulfill One Or Multiple Functional Requirements. this Is A Request For Information Only – Not A Request For Proposal. This Rfi Is Issued For The Purpose Of Determining Market Interest, Feasibility, And Capability Of Sources And Does Not Constitute A Request For Proposal Or Commitment By The Government. this Rfi Is Issued Sole For The Market Research Information And Planning Purposes And Does Not Constitute A Solicitation.  information Herein Is Based On The Best Information Available At The Time Of Publication, Is Subject To Revision, And Is Not Binding Upon The Government.  no Reimbursement Will Be Made Of Any Costs To Provide Information In Response To This Rfi Or Any Follow-up Information Requests. this Rfi Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Meeting The Requirements Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract.  navair Is Requesting Information On The Industry’s Capability Of Manufacturing Commercial Off The Shelf (cots) Or Modified Cots (mcots) Rack Mounted Dc Power Supply Instruments That Meet Or Exceed The Requirements Below. the Rack Mounted Dc Power Supply Instruments Shall Meet Or Exceed The Performance/environmental Requirements Shown In The Following Functional Breakdown: instrumentation Performance Requirements dc Power Supply Requirements ** Refer To The Tables In The Attached Instrumentation Characteristics Excel File For All Performance Requirements. The Performance Specification Is Export-controlled. In Order To Receive A Copy Of The Performance Specification Interested Respondents Must Be U. S. Dod Contractors. Interested Respondents Must Provide The Contracting Office Point Of Contact Identified Below With A Copy Of Their Current, Approved Form Dd2345, 'militarily Critical Technical Data Agreement'. Once Received And Current Jcp Certification Verified By Navair, The Draft Performance Specification Will Be Transmitted To You From Navair Via The Dod Safe System, To The Data Custodian You Have Identified On The Dd Form 2345. Contractors Must Request The Draft Performance Specification In Writing From Mr. Justin Panecki, Justin.p.panecki2.civ@us.navy.mil. acquisition Instrumentation Environmental Requirements the System’s Equipment Design, Located Outside The Instrument And Control Room (i&c Cab), Shall Meet Class 1 Environmental Requirements As Defined In Table 2 Of Mil-prf-28800. the System’s Equipment, Within The Instrument And Control Room (i&c Cab) Boundary, Design Shall Meet The Temperature And Humidity Requirements Of Class 4 Equipment In Section 3.9.2 Of Mil-prf-28800. the System Shall Be Fully Operational During The Expected Shipboard Deck Environmental Vibration Levels As Described Per Mil-std-167-1a, Type 1 - Environmental Vibration. the System’s Equipment Design Shall Comply With The Requirement Matrix For Navy Surface Ships And Navy Ground In Table 5 Of Mil-std-461 Or Equivalent. cs115 (conducted Susceptibility, Bulk Cable Injection, Impulse Excitation) And Cs118 (personnel Borne Electrostatic Discharge) Are Specified As Applicable. navair Is Requesting The Following Information From Industry Vendors To Demonstrate How They Can Meet The Requirements Listed Above: vendor Capability. vendor Capacity. documentation Demonstrating That The Vendor Is Capable Of Manufacturing Cots And/or Modified Cots Rack Mounted Dc Power Supply Instruments. Documentation Demonstrating That The Vendor Is Capable To Sustain The Product. any Information On Past Performance Of Similar Efforts. a Technical Data Sheet Describing The Electrical And Performance Characteristics Of The Instruments. the Vendors May Also Respond With A Presentation Of 5 Slides Or Less With A Specific Focus On Explanation Of Data Sheets And Instrument Performance In Relation To Gfi Requirements. navair Is Requesting The Following Information From Industry Vendors To Comprehend The Logistics Impacts Associated To Each Instrument: how Long Will The Product Be Supported For Procurement And Repair? does The Product Require Calibration? if So, Does The Product Require Additional Equipment/tools To Calibrate? all Interested Parties Should Have The Following: a Quality Assurance Program Compliant With Iso9001 Or Equivalent. test Data Demonstrating That The Above Performance And Environmental Requirements Have Been Met With The Proposed Rack Mounted Dc Power Supply Instruments. acquisition Instrumentation Software Requirements instrumentation Shall Be Able To Be Controlled Through An Application Programming Interface (api) By Software Code Running On The Test Bench. Navair’s Preferred Apis Are Those Standardized Interfaces Defined And Managed By The Interchangeable Virtual Instrument (ivi) Foundation (https://www.ivifoundation.org) Including The Following: vxi Plug & Play standard Commands For Programmable Instrumentation (scpi) virtual Instrument Software Architecture (visa) interchangeable Virtual Instrument (ivi) all Interested Parties Should Respond With Their Compliance With The Above Apis For Each Potential Offering. If A Vendor’s Instrument Is Not Compliant With The Above Apis, They Should State So And, Instead, Provide An Overview Of How To Programmatically Control Their Instrument, Including Any Required Drivers, Applications, Programming Languages, Operating Systems, Or Third-party Tools. in Addition To Expressing Interest And Providing The Requested Information, Include Estimated Price Details. The Government Is Seeking Unit Price And Lead Time For Each Type Of Rack Mounted Data Acquisition Instrument Type. Brochures, Manufacturing Capability And Capacity, And Past Performance Information May Be Included In The Rfi Response. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics Code Assigned To This Notice. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In This Rfi In Order To Assist The Government’s Capability Determination.  far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance.  Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far).   interested Sources Should Provide Rfi Responses And Related Data To The Pocs Identified Below, No Later Than 30 Days After The Post Date Of This Rfi. All Information Sent Should Reference This Rfi Number On The Subject Response Line Of The Emailed Response As Well As On All Enclosed Documents. Responses Must Include The Company Name, Address, Point Of Contact Name And Email/phone, And Company Size. Proprietary Data Must Be Marked On A Page-by-page Basis And Will Be Kept Confidential And Protected Where So Designated. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Rfp That May Be Issued. Any Comments Provided May Or May Not Be Included In A Formal Solicitation. Respondents May Provide Information And Rough Orders Of Magnitude (rom) On Any Currently Available Product Or A Company's' Capabilities That Will Meet The Navy's Requirements. responses Must Be Received No Later Than December 16th 2024, By 4pm Est.

Description: This Is A Request For Information (rfi) Only. There Is No Solicitation Package Available. the Naval Air Warfare Center, Aircraft Division (nawcad) Lakehurst, Nj Is Issuing This Request For Information Notice To Conduct Market Research To Identify Potential Sources And Request Information For A Potential Procurement Of Rack Mounted Analog Discrete Input Measurement Instruments For The Engine Test Instrumentation Replacement System (etirs). The Instrumentation Must Meet Various Functions, And Each Instrument Can Fulfill One Or Multiple Functional Requirements. this Is A Request For Information Only – Not A Request For Proposal. This Rfi Is Issued For The Purpose Of Determining Market Interest, Feasibility, And Capability Of Sources And Does Not Constitute A Request For Proposal Or Commitment By The Government. this Rfi Is Issued Sole For The Market Research Information And Planning Purposes And Does Not Constitute A Solicitation.  information Herein Is Based On The Best Information Available At The Time Of Publication, Is Subject To Revision, And Is Not Binding Upon The Government.  no Reimbursement Will Be Made Of Any Costs To Provide Information In Response To This Rfi Or Any Follow-up Information Requests. this Rfi Is A Market Research Tool Being Used To Determine Potential And Eligible Vendors Capable Of Meeting The Requirements Described Herein Prior To Determining The Method Of Acquisition And Issuance Of A Request For Proposal. In Accordance With Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract.  navair Is Requesting Information On The Industry’s Capability Of Manufacturing Commercial Off The Shelf (cots) Or Modified Cots (mcots) Rack Mounted Relay Distribution Instruments That Meet Or Exceed The Requirements Below. the Rack Mounted Relay Distribution Instruments Shall Meet Or Exceed The Performance/environmental Requirements Shown In The Following Functional Breakdown: instrumentation Performance Requirements relay Distribution Performance Requirements ** Refer To The Tables In The Attached Instrumentation Characteristics Excel File For All Performance Requirements. The Performance Specification Is Export-controlled. In Order To Receive A Copy Of The Performance Specification Interested Respondents Must Be U. S. Dod Contractors. Interested Respondents Must Provide The Contracting Office Point Of Contact Identified Below With A Copy Of Their Current, Approved Form Dd2345, 'militarily Critical Technical Data Agreement'. Once Received And Current Jcp Certification Verified By Navair, The Draft Performance Specification Will Be Transmitted To You From Navair Via The Dod Safe System, To The Data Custodian You Have Identified On The Dd Form 2345. Contractors Must Request The Draft Performance Specification In Writing From Mr. Terrence Shearer, Terrence.d.shearer.civ@us.navy.mil. acquisition Instrumentation Environmental Requirements the System’s Equipment Design, Located Outside The Instrument And Control Room (i&c Cab), Shall Meet Class 1 Environmental Requirements As Defined In Table 2 Of Mil-prf-28800. the System’s Equipment, Within The Instrument And Control Room (i&c Cab) Boundary, Design Shall Meet The Temperature And Humidity Requirements Of Class 4 Equipment In Section 3.9.2 Of Mil-prf-28800. the System Shall Be Fully Operational During The Expected Shipboard Deck Environmental Vibration Levels As Described Per Mil-std-167-1a, Type 1 - Environmental Vibration. the System’s Equipment Design Shall Comply With The Requirement Matrix For Navy Surface Ships And Navy Ground In Table 5 Of Mil-std-461 Or Equivalent. cs115 (conducted Susceptibility, Bulk Cable Injection, Impulse Excitation) And Cs118 (personnel Borne Electrostatic Discharge) Are Specified As Applicable. navair Is Requesting The Following Information From Industry Vendors To Demonstrate How They Can Meet The Requirements Listed Above: vendor Capability. vendor Capacity. documentation Demonstrating That The Vendor Is Capable Of Manufacturing Cots And/or Modified Cots Rack Mounted Relay Distribution Instruments. Documentation Demonstrating That The Vendor Is Capable To Sustain The Product. any Information On Past Performance Of Similar Efforts. a Technical Data Sheet Describing The Electrical And Performance Characteristics Of The Instruments. the Vendors May Also Respond With A Presentation Of 5 Slides Or Less With A Specific Focus On Explanation Of Data Sheets And Instrument Performance In Relation To Gfi Requirements. navair Is Requesting The Following Information From Industry Vendors To Comprehend The Logistics Impacts Associated To Each Instrument: how Long Will The Product Be Supported For Procurement And Repair? does The Product Require Calibration? if So, Does The Product Require Additional Equipment/tools To Calibrate? all Interested Parties Should Have The Following: a Quality Assurance Program Compliant With Iso9001 Or Equivalent. test Data Demonstrating That The Above Performance And Environmental Requirements Have Been Met With The Proposed Rack Mounted Relay Distribution Instruments. acquisition Instrumentation Software Requirements instrumentation Shall Be Able To Be Controlled Through An Application Programming Interface (api) By Software Code Running On The Test Bench. Navair’s Preferred Apis Are Those Standardized Interfaces Defined And Managed By The Interchangeable Virtual Instrument (ivi) Foundation (https://www.ivifoundation.org) Including The Following: vxi Plug & Play standard Commands For Programmable Instrumentation (scpi) virtual Instrument Software Architecture (visa) interchangeable Virtual Instrument (ivi) all Interested Parties Should Respond With Their Compliance With The Above Apis For Each Potential Offering. If A Vendor’s Instrument Is Not Compliant With The Above Apis, They Should State So And, Instead, Provide An Overview Of How To Programmatically Control Their Instrument, Including Any Required Drivers, Applications, Programming Languages, Operating Systems, Or Third-party Tools. in Addition To Expressing Interest And Providing The Requested Information, Include Estimated Price Details. The Government Is Seeking Unit Price And Lead Time For Each Type Of Rack Mounted Data Acquisition Instrument Type. Brochures, Manufacturing Capability And Capacity, And Past Performance Information May Be Included In The Rfi Response. to Assist In Our Market Research And Determination Of Any Applicable Small Business Set-aside For This Effort, If You Are A Small Business Interested In Priming This Effort And Plan To Utilize “similarly Situated Entities” To Meet The Limitations On Subcontracting, Please Identify The Name & Cage Code Of The Specific Firm(s) You Intend To Partner/subcontract With To Meet The Requirements As Well As Their Sb Size Status Under The Naics Code Assigned To This Notice. Information Regarding Any Planned Similarly Situated Entity Should Be Included In Answering Any Questions Outlined In This Rfi In Order To Assist The Government’s Capability Determination.  far 52.219-14 Limitation On Subcontracting Requires A Small Business Prime On A Set-aside To Perform At Least 50% Of The Cost Of Contract Performance.  Small Business Primes May Now Count “first Tier Subcontracted” Work Performed By Similarly Situated Entities As If It Were Performed By The Prime Itself. Please Read The Full Text Of The Clause Deviation (52.219-14 Class Deviation 2020-o0008 Dated 04/03/20 At Https://www.acquisition.gov/browse/index/far).   interested Sources Should Provide Rfi Responses And Related Data To The Pocs Identified Below, No Later Than 30 Days After The Post Date Of This Rfi. All Information Sent Should Reference This Rfi Number On The Subject Response Line Of The Emailed Response As Well As On All Enclosed Documents. Responses Must Include The Company Name, Address, Point Of Contact Name And Email/phone, And Company Size. Proprietary Data Must Be Marked On A Page-by-page Basis And Will Be Kept Confidential And Protected Where So Designated. Failure To Respond To This Rfi Does Not Preclude Participation In Any Future Rfp That May Be Issued. Any Comments Provided May Or May Not Be Included In A Formal Solicitation. Respondents May Provide Information And Rough Orders Of Magnitude (rom) On Any Currently Available Product Or A Company's' Capabilities That Will Meet The Navy's Requirements. responses Must Be Received No Later Than December 16th 2024 By 4pm Est.

Details: Statement Of Work: R Series Defibrillator kansas City Va Medical Center objective the Kansas City Va Medical Center Intends To Procure A Replacement Fleet Of Defibrillators. This Document Highlights The Technical Specifications And Services Being Requested By The Facility For Consideration Towards Purchase Of The Units. Vendors Under This Proposal Shall Provide All Equipment And Accessories, Installation Services, And Project Management Support. scope the Contractor Shall Furnish All Equipment Detailed In Table 1. All Products Must Meet All Salient Characteristics And Functions Defined In Section 3. table 1 description quantity 30520007201310013 r Series ® Plus Defibrillator Includes Expansion Pack 40 surepower Rechargeable Lithium Lon Battery pack 5.8 Ah Capacity high Density Lithium Ion Chemistry runtime Indicator automatic Calibration Ready stores History Of Use And Maintenance 40 r Wifi Card With Clock Sync And Fips 40 5-year Hospital Warranty n/a the Contractor Shall Provide All Components Required To Implement All Listed Hardware And Software So The System (including All Items In Table 1) Is Fully Operational. the Contractor Shall Provide Any Missing Parts, Features, Software, And/or Components Not Included To Fully Complete The Installation At No Additional Cost To The Government. the Contractor Shall Provide All Labor, Supervision, And Any Other Resources Required To Deliver, Assemble/install, And Test All Listed Equipment. all Hardware, Software, And Services Must Meet The Manufacturers And Va Specifications. salient Characteristics[pmc(1] r Series Defibrillators specification/salient Characteristics: maximum Dimensions: Height 10 In; Width 12 In; Depth 13 In maximum Weight: 15 Lb must Be Operational With Ac Or Dc includes Ac Power Cord guidelines 2020- Compatible aed W/ Manual Override 5-year Minimum Hospital Warranty must Have The Following Accessories, Capabilities, And Ability To Operate In The Following Modes: physical Features nellcor Pulse Oximetry Compatibility order Sensor Separately nibp 23-33cm Reusable Cuff 􀀦 3-meter Air Hose rmt Motion Tolerance for Use With Adult, Pedi And Neonatal Patients mainstream Etco2 color Lcd Screen batteries Surepower Rechargeable Lithium Lon Battery Pack 5.8 Ah Capacity High Density Lithium-ion Chemistry Run-time Indicator Automatic Calibration Ready Stores History Of Use And Maintenance operators’ Manual 1 Per Defibrillator language: English provided By Manufacturer And Includes Manufacturer’s Instructions defibrillation biphasic Defibrillation provides Automatic Life Support Defibrillation When Powered On. ability To Functions As An Aed, But Not When Initially Turned On. manual Defibrillator To Support Pediatrics To Adults To Include Automatic Safety Feature To Eliminate The Risk Of Delivering An Adult Energy Level To A Pediatric Patient less Than 7 Seconds Of Charge Time For A New Fully Charged Battery evaluates Ecg Rhythm To Determine If Shock Delivery Is Required configurations configurable For Either Cpr Or Shock-first Driven Protocols energy Sequences Can Be Configured For Single Or Multiple Shocks With Fixed Or Escalating Energy Levels the Cpr Interval Length Is Configurable In 1-minute Increments For Up To 4 Minutes wi-fi Connectivity allows The Wireless Communication Of Clinical And Test Data (no Phi) synchronizes The Time To That Of The Network To Negate “clock Drift” And Ensures Time Accuracy Of Code Data. fips Compliant real Cpr Help numeric Display Of Cpr Depth And Rate For Adult And Pediatric Patients visual And Audio Prompts To Coach Cpr Depth For Adult Patients release Bar To Ensure Adequate Release Off The Chest metronome To Coach Rate For Adult And Pediatric Patients. indicates Elapsed Time Since Last Detected Chest Compression cpr Artifact Filtering adult And Pediatric Aed Ecg Analysis see-thru ® -cpr Filter • Onestep Cable Manager defib Mentor Familiarization Aid onestep Pacing Includes: • Onestep Pacing Cable (also Supports Cpr) • Ecg Leads contractor Shall Deliver All Equipment To: kansas City Va Medical Center 4801 E. Lynwood Blvd kansas City, Mo 64128 attn: Biomedical Engineering ensure That Equipment Is Sent To The Attention Of Biomedical Engineering include The Po Number On The Shipping Label. deliver Materials To The Facility In Manufacturer's Original Sealed Boxes Or Containers With Brand Name Marked Thereon. Refurbished Products Will Not Be Accepted. package To Prevent Damage Or Deterioration During Shipment, Handling, And Storage. maintain Protective Covering In Place And In Good Repair Until Delivery Is Necessary. any Government Requested Delayed Delivery Up To 90 Days Shall Be At No Additional Cost To The Government. contractor Shall Conduct A Pre-delivery Meeting At Least 3 Days Prior To Initial Award Delivery Date For Verification Of Delivery And Installation Dates. delivery Of Oversized, Palletized Orders, Or Orders That Contain A Large Number Of Components Will Be Coordinated With The Cor Who Will Communicate Internally With Warehouse Staff. contractor Shall Adhere To All Equipment Delivery Deadlines Outlined In Table 2. assembly, Installation, And Testing contractor Responsible For Assembly And Installation Of Systems After Notification From Cor (or Designee) That It Has Been Delivered To Station. install Shall Include Unboxing And Transportation Of Equipment To Final Use Location. installation Shall Include Implementation And Testing Of All Purchased Interfaces To Va Electronic Systems In Coordination With Clinical Staff, Biomedical Engineering Staff, O&it Staff, And Others Identified As Needed. vendor Shall Provide All Necessary Accessories, Cables, Adaptors, Etc. To Deliver A Fully Functional Clinical Device/system. hours Of Operation kansas City Va Normal Hours Are Monday Through Friday, 7:00 A.m. To 4:30 P.m. Central Standard Time, Excluding Federal Holidays. va Follows All Federal Holidays That Are Set By Law (usc Title 5 Section 6103). the Government Hereby Provides Notice And Contractor Hereby Acknowledges Receipt That Government Personnel Observe The Listed Days As Holidays: new Year's Day January 1 martin Luther King's Birthday Third Monday In January president's Birthday Third Monday In February memorial Day Last Monday In May juneteenth June 19 independence Day July 4 labor Day First Monday In September columbus Day Second Monday In October veterans Day November 11 thanksgiving Day Fourth Thursday In November christmas December 25 in Addition To The Days Designated As Holidays, The Government Observes The Following Days: 1. Any Other Day Designated By Executive Order. 2. Any Other Day Designated By The President’s Proclamation; And 3. Any Other Day Designated By Federal Statute. all Services Shall Be Performed During Normal Hours Unless Otherwise Scheduled With The Cor. hardware/software Update/upgrade Installations, Where Applicable, May Be Scheduled And Performed Outside Normal Hours At No Additional Charge To The Government (unless It Would Be Detrimental To Equipment Up-time; To Be Determined By The Cor Or Designee). all Agreed-upon Work Scheduled Outside Normal Business Hours Shall Be At No Additional Cost To The Government. site Conditions & Protection Of Property vendor Representatives Must Check In With Dole Va Biomedical Engineering When They Arrive On-site And Check Out Upon Completion Of Work Each Day. vendor On-site Visits Shall Be Coordinated With The Cor (or Designee) Before Being Scheduled Or Conducted. there Shall Be No Smoking On Kansas City Va Premises At Any Time. eating And Drinking Are Not Allowed Inside The Hospital, Except For In The Canteen Dining Area. vendor Staff Shall Always Be Professional And Shall Take All Necessary Precautions To Maintain A Safe Environment For The Occupants. This Includes, As Necessary, Coordinating Access And Closures For Sensitive Areas Of The Medical Center. vendor Shall Be Responsible For Cleaning All Work Areas After Completion Of Tasks. This Includes, But Is Not Limited To, Removal Of Packaging And A Clean Sweep/mop Of The Area As Required By Work Type. contractor Shall Protect All Items From Damage. The Contractor Shall Take Precaution Against Damage To The Building(s), Grounds, And Furnishings. The Contractor Shall Repair Or Replace Any Items Related To Building(s) Or Grounds Damaged Accidentally Or On Purpose Due To Actions By The Contractor. the Contractor Shall Perform An Inspection Of The Building(s) And Grounds With The Cor Prior To Commencing Work To Ensure That The Contractor Shall Be Able To Repair Or Replace Any Items, Components, Building(s) Or Grounds Damaged Due To Negligence And/or Actions Taken By The Contractor. The Source Of All Repairs Beyond Simple Surface Cleaning Is The Facility Construction Contractor (or Appropriate Subcontractor), So That Building Warranty Is Maintained. Concurrence From The Va Facilities Management Poc And Cor Is Required Before The Contractor May Perform Any Significant Repair Work. In All Cases, Repairs Shall Utilize Materials Of The Same Quality, Size, Texture, Grade, And Color To Match Adjacent Existing Work. vendor Staff Shall Minimize Noise As Much As Possible While Working In All Buildings. vendor Is Responsible For Providing All Ppe Necessary For Their Work. the Contractor Shall Be Responsible For Security Of The Areas In Which The Work Is Being Performed Prior To Completion. security Requirements network Security the Vendor Is Required To Complete And Submit The Two Attached Va Security Forms, If Their Equipment Can Be Connected To The Va Network. If These Forms Are Not Completed And Submitted With The Bid Package, The Vendor Can Be Disqualified From The Bidding Process. the C&a Requirements Do Not Apply, And That A Security Accreditation Package Is Not Required. warranty & Service the Contractor Shall Provide All Manufacturers’ Warranty With Products Upon Delivery. warranty – The System, All Accessories, And All Software Shall Be Covered Under The Manufacturer’s Warranty And Shall Include All Parts And Labor For At Least 5 Years Following Acceptance By The Vamc. a Manufacturer’s Factory-trained Field Service Engineer Shall Perform Installation And Maintenance During The Warranty Period. the Warranty Period Shall Not Begin Until After The Dole Va Cor Or Designee Has Accepted The Products Delivery, Installation, And Functionality. the Warranty Shall Include All Manufacturer Recommended Preventive Maintenance Procedures For Its Duration. all Available Software Updates And Security Patches Will Be Made Available To The Kansas City Va During The Warranty Period. vendor Shall Provide Response To Applications And Technical Calls Within 8 Hours. vendor Shall Ship Replacement Parts Within 48 Hours Of Identifying Necessity By Kansas City Va Biomedical Engineering Staff. invoicing va’s Electronic Invoice Presentment And Payment System – The Fsc Uses A Third-party Contractor, Tungsten, Vendor Electronic Invoice Submission Methods. Facsimile, E-mail, And Scanned Documents Are Not Acceptable Forms Of Submission For Payment Requests. Electronic Form Means An Automated System Transmitting Information Electronically According To The Accepted Electronic Data Transmission Methods Below: va’s Electronic Invoice Presentment And Payment System – The Fsc Uses A Third-party Contractor, Tungsten, To Transition Vendors From Paper To Electronic Invoice Submission. Please Go To This Website: Http://www.tungstennetwork.com/us/en/veterans-affairs/ To Begin Submitting Electronic Invoices, Free Of Charge. a System That Conforms To The X12 Electronic Data Interchange (edi) Formats Established By The Accredited Standards Center (asc) Chartered By The American National Standards Institute (ansi). The X12 Edi Web Site (http://www.x12.org). [pmc(1]mykaela-need Fips Compliance, Trm Approved, And Approved Era Language

Details: Statement Of Work: R Series Defibrillator kansas City Va Medical Center objective the Kansas City Va Medical Center Intends To Procure A Replacement Fleet Of Defibrillators. This Document Highlights The Technical Specifications And Services Being Requested By The Facility For Consideration Towards Purchase Of The Units. Vendors Under This Proposal Shall Provide All Equipment And Accessories, Installation Services, And Project Management Support. scope the Contractor Shall Furnish All Equipment Detailed In Table 1. All Products Must Meet All Salient Characteristics And Functions Defined In Section 3. table 1 the Contractor Shall Provide All Components Required To Implement All Listed Hardware And Software So The System (including All Items In Table 1) Is Fully Operational. the Contractor Shall Provide Any Missing Parts, Features, Software, And/or Components Not Included To Fully Complete The Installation At No Additional Cost To The Government. the Contractor Shall Provide All Labor, Supervision, And Any Other Resources Required To Deliver, Assemble/install, And Test All Listed Equipment. all Hardware, Software, And Services Must Meet The Manufacturers And Va Specifications. salient Characteristics[pmc(1] r Series Defibrillators quantity: 39 specification/salient Characteristics: maximum Dimensions: Height 10 In; Width 12 In; Depth 13 In maximum Weight: 15 Lb must Be Operational With Ac Or Dc includes Ac Power Cord guidelines 2020- Compatible aed W/ Manual Override 5-year Minimum Hospital Warranty must Have The Following Accessories, Capabilities, And Ability To Operate In The Following Modes: physical Features nellcor Pulse Oximetry Compatibility order Sensor Separately nibp 23-33cm Reusable Cuff 􀀦 3-meter Air Hose rmt Motion Tolerance for Use With Adult, Pedi And Neonatal Patients mainstream Etco2 color Lcd Screen batteries Surepower Rechargeable Lithium Lon Battery Pack 5.8 Ah Capacity High Density Lithium-ion Chemistry Run-time Indicator Automatic Calibration Ready Stores History Of Use And Maintenance operators’ Manual 1 Per Defibrillator language: English provided By Manufacturer And Includes Manufacturer’s Instructions defibrillation biphasic Defibrillation provides Automatic Life Support Defibrillation When Powered On. ability To Functions As An Aed, But Not When Initially Turned On. manual Defibrillator To Support Pediatrics To Adults To Include Automatic Safety Feature To Eliminate The Risk Of Delivering An Adult Energy Level To A Pediatric Patient less Than 7 Seconds Of Charge Time For A New Fully Charged Battery evaluates Ecg Rhythm To Determine If Shock Delivery Is Required configurations configurable For Either Cpr Or Shock-first Driven Protocols energy Sequences Can Be Configured For Single Or Multiple Shocks With Fixed Or Escalating Energy Levels the Cpr Interval Length Is Configurable In 1-minute Increments For Up To 4 Minutes wi-fi Connectivity allows The Wireless Communication Of Clinical And Test Data (no Phi) synchronizes The Time To That Of The Network To Negate “clock Drift” And Ensures Time Accuracy Of Code Data. fips Compliant real Cpr Help numeric Display Of Cpr Depth And Rate For Adult And Pediatric Patients visual And Audio Prompts To Coach Cpr Depth For Adult Patients release Bar To Ensure Adequate Release Off The Chest metronome To Coach Rate For Adult And Pediatric Patients. indicates Elapsed Time Since Last Detected Chest Compression cpr Artifact Filtering adult And Pediatric Aed Ecg Analysis see-thru ® -cpr Filter • Onestep Cable Manager defib Mentor Familiarization Aid onestep Pacing Includes: • Onestep Pacing Cable (also Supports Cpr) • Ecg Leads contractor Shall Deliver All Equipment To: kansas City Va Medical Center 4801 E. Lynwood Blvd kansas City, Mo 64128 attn: Biomedical Engineering ensure That Equipment Is Sent To The Attention Of Biomedical Engineering include The Po Number On The Shipping Label. deliver Materials To The Facility In Manufacturer's Original Sealed Boxes Or Containers With Brand Name Marked Thereon. Refurbished Products Will Not Be Accepted. package To Prevent Damage Or Deterioration During Shipment, Handling, And Storage. maintain Protective Covering In Place And In Good Repair Until Delivery Is Necessary. any Government Requested Delayed Delivery Up To 90 Days Shall Be At No Additional Cost To The Government. contractor Shall Conduct A Pre-delivery Meeting At Least 3 Days Prior To Initial Award Delivery Date For Verification Of Delivery And Installation Dates. delivery Of Oversized, Palletized Orders, Or Orders That Contain A Large Number Of Components Will Be Coordinated With The Cor Who Will Communicate Internally With Warehouse Staff. contractor Shall Adhere To All Equipment Delivery Deadlines Outlined In Table 2. assembly, Installation, And Testing contractor Responsible For Assembly And Installation Of Systems After Notification From Cor (or Designee) That It Has Been Delivered To Station. install Shall Include Unboxing And Transportation Of Equipment To Final Use Location. installation Shall Include Implementation And Testing Of All Purchased Interfaces To Va Electronic Systems In Coordination With Clinical Staff, Biomedical Engineering Staff, O&it Staff, And Others Identified As Needed. vendor Shall Provide All Necessary Accessories, Cables, Adaptors, Etc. To Deliver A Fully Functional Clinical Device/system. removal Of Existing Equipment remove 35 Existing Defibrillators, Trainer, And Associated Accessories, (including Pads, Paddles, Batteries, Trainers, Etc.), If Not Compatible With New Defibrillator Fleet, From Dole Va Premises. contractor Shall Adhere To All Equipment Removal Deadlines Outlined In Table 2. include Trade-in Value Deduction On Bid Price In Exchange For The Equipment Outlined In Section 3, Specifically The Defibrillators And The Trainer. hours Of Operation kansas City Va Normal Hours Are Monday Through Friday, 7:00 A.m. To 4:30 P.m. Central Standard Time, Excluding Federal Holidays. va Follows All Federal Holidays That Are Set By Law (usc Title 5 Section 6103). the Government Hereby Provides Notice And Contractor Hereby Acknowledges Receipt That Government Personnel Observe The Listed Days As Holidays: new Year's Day January 1 martin Luther King's Birthday Third Monday In January president's Birthday Third Monday In February memorial Day Last Monday In May juneteenth June 19 independence Day July 4 labor Day First Monday In September columbus Day Second Monday In October veterans Day November 11 thanksgiving Day Fourth Thursday In November christmas December 25 in Addition To The Days Designated As Holidays, The Government Observes The Following Days: 1. Any Other Day Designated By Executive Order. 2. Any Other Day Designated By The President’s Proclamation; And 3. Any Other Day Designated By Federal Statute. all Services Shall Be Performed During Normal Hours Unless Otherwise Scheduled With The Cor. hardware/software Update/upgrade Installations, Where Applicable, May Be Scheduled And Performed Outside Normal Hours At No Additional Charge To The Government (unless It Would Be Detrimental To Equipment Up-time; To Be Determined By The Cor Or Designee). all Agreed-upon Work Scheduled Outside Normal Business Hours Shall Be At No Additional Cost To The Government. site Conditions & Protection Of Property vendor Representatives Must Check In With Dole Va Biomedical Engineering When They Arrive On-site And Check Out Upon Completion Of Work Each Day. vendor On-site Visits Shall Be Coordinated With The Cor (or Designee) Before Being Scheduled Or Conducted. there Shall Be No Smoking On Kansas City Va Premises At Any Time. eating And Drinking Are Not Allowed Inside The Hospital, Except For In The Canteen Dining Area. vendor Staff Shall Always Be Professional And Shall Take All Necessary Precautions To Maintain A Safe Environment For The Occupants. This Includes, As Necessary, Coordinating Access And Closures For Sensitive Areas Of The Medical Center. vendor Shall Be Responsible For Cleaning All Work Areas After Completion Of Tasks. This Includes, But Is Not Limited To, Removal Of Packaging And A Clean Sweep/mop Of The Area As Required By Work Type. contractor Shall Protect All Items From Damage. The Contractor Shall Take Precaution Against Damage To The Building(s), Grounds, And Furnishings. The Contractor Shall Repair Or Replace Any Items Related To Building(s) Or Grounds Damaged Accidentally Or On Purpose Due To Actions By The Contractor. the Contractor Shall Perform An Inspection Of The Building(s) And Grounds With The Cor Prior To Commencing Work To Ensure That The Contractor Shall Be Able To Repair Or Replace Any Items, Components, Building(s) Or Grounds Damaged Due To Negligence And/or Actions Taken By The Contractor. The Source Of All Repairs Beyond Simple Surface Cleaning Is The Facility Construction Contractor (or Appropriate Subcontractor), So That Building Warranty Is Maintained. Concurrence From The Va Facilities Management Poc And Cor Is Required Before The Contractor May Perform Any Significant Repair Work. In All Cases, Repairs Shall Utilize Materials Of The Same Quality, Size, Texture, Grade, And Color To Match Adjacent Existing Work. vendor Staff Shall Minimize Noise As Much As Possible While Working In All Buildings. vendor Is Responsible For Providing All Ppe Necessary For Their Work. the Contractor Shall Be Responsible For Security Of The Areas In Which The Work Is Being Performed Prior To Completion. security Requirements network Security the Vendor Is Required To Complete And Submit The Two Attached Va Security Forms, If Their Equipment Can Be Connected To The Va Network. If These Forms Are Not Completed And Submitted With The Bid Package, The Vendor Can Be Disqualified From The Bidding Process. the C&a Requirements Do Not Apply, And That A Security Accreditation Package Is Not Required. warranty & Service the Contractor Shall Provide All Manufacturers’ Warranty With Products Upon Delivery. warranty – The System, All Accessories, And All Software Shall Be Covered Under The Manufacturer’s Warranty And Shall Include All Parts And Labor For At Least 5 Years Following Acceptance By The Vamc. a Manufacturer’s Factory-trained Field Service Engineer Shall Perform Installation And Maintenance During The Warranty Period. the Warranty Period Shall Not Begin Until After The Dole Va Cor Or Designee Has Accepted The Products Delivery, Installation, And Functionality. the Warranty Shall Include All Manufacturer Recommended Preventive Maintenance Procedures For Its Duration. all Available Software Updates And Security Patches Will Be Made Available To The Kansas City Va During The Warranty Period. vendor Shall Provide Response To Applications And Technical Calls Within 8 Hours. vendor Shall Ship Replacement Parts Within 48 Hours Of Identifying Necessity By Kansas City Va Biomedical Engineering Staff. invoicing va’s Electronic Invoice Presentment And Payment System – The Fsc Uses A Third-party Contractor, Tungsten, Vendor Electronic Invoice Submission Methods. Facsimile, E-mail, And Scanned Documents Are Not Acceptable Forms Of Submission For Payment Requests. Electronic Form Means An Automated System Transmitting Information Electronically According To The Accepted Electronic Data Transmission Methods Below: va’s Electronic Invoice Presentment And Payment System – The Fsc Uses A Third-party Contractor, Tungsten, To Transition Vendors From Paper To Electronic Invoice Submission. Please Go To This Website: Http://www.tungstennetwork.com/us/en/veterans-affairs/ To Begin Submitting Electronic Invoices, Free Of Charge. a System That Conforms To The X12 Electronic Data Interchange (edi) Formats Established By The Accredited Standards Center (asc) Chartered By The American National Standards Institute (ansi). The X12 Edi Web Site (http://www.x12.org). [pmc(1]mykaela-need Fips Compliance, Trm Approved, And Approved Era Language

Details: Introduction: in Accordance With Federal Acquisition Regulation (far) 10.002(b)(2), This Sources Sought Notice Is For Market Research And Information Purposes Only At This Time And Shall Not Be Construed As A Solicitation Or As An Obligation On The Part Of The Department Of Veterans Affairs (va). the Department Of Veterans Affairs, Veterans Health Administration (vha), Program Contracting Activity Central (pcac) Is Conducting A Market Survey And Is Seeking Potential Sources For Project 693-22-700 Construct Ehrm Infrastructure Upgrades At The Wilkes-barre Va Medical Center (vamc) Located In Wilkes-barre, Pennsylvania. project Description: the Scope Of Work Shall Generally Consist Of Providing All Labor, Materials, Tools, Equipment, Permits, Testing, And Reports Required To Perform Electronic Health Records Management (ehrm) Infrastructure Upgrade, Located At The Wilkes Barre Va (vamc), As Generally Described In This Scope Of Work, But Detailed In Drawing Set Titled: Ehrm Infrastructure Upgrades. Vamc Wilkes-barre Pennsylvania, Usa, Project #: 693-22-700. The Projects Outcome Will Be A New Data Network On The Wbva Campus. the Ehrm Infrastructure Upgrade Project Is A Multi-phase Project. Key Elements Include, But Not Limited To: 1) Construct A New Building To House A Data Center, Including, But Not Limited To Demolition Of Two Existing Pre-manufactured Buildings, Rerouting A Fire Protection Service Line, New Building Shell, Interior Walls, Finishes, And All Mechanical, Electrical And Plumbing Systems And Data Room Construction As Defined By Drawings And Specifications. 2) Construct And/or Renovate Over Twenty-five Telecom Rooms (tr) With Accompanying Network Equipment, Climate Controls And Electrical Upgrades. 3) Install, Terminate, And Test Over Six-thousand Cat 6a Network Cables From The Respective Tr To Each Work Area Outlet (wao) Location. 4) Construct Underground Ductwork System To Connect Several Buildings To The New Data Center. 5) Install Fiber Optic Cables. 6) Demolition Of Legacy Trs And Removal Of Associated Network Equipment And Network Cables. procurement Information: the Proposed Project Will Be A Competitive, Firm-fixed-price Contract Utilizing The Design-bid-build Approach (final Specifications And Drawings Will Be Provided). The Anticipated Solicitation Will Be Issued Either As A Request For Proposal (rfp) In Accordance With Far Part 15, Considering Technical And Price Factors Or As An Invitation For Bid (ifb) In Accordance With Far Part 14, Considering Price Only. The Results And Analysis Of The Market Research Will Finalize The Determination Of The Procurement Method. The Type Of Socio-economic Set-aside, If Any, Will Depend Upon The Responses To This Notice And Any Other Information Gathered During The Market Research Process. this Project Is Planned For Advertising In April, 2025. In Accordance With Vaar 836.204, The Magnitude Of Construction Is Between $20,000,000.00 And $50,000,000.00. The North American Industry Classification System (naics) Code 236220 (size Standard $45.0 Million) Applies To This Procurement. The Duration Of The Project Is Currently Estimated At 548 Calendar Days From The Issuance Of A Notice To Proceed. The Services For This Project Will Include Providing All Construction Related Services Such As: Providing Tools, Labor, Materials, Equipment, Permits, Licenses, Supervision, And Quality Control Required To Complete The Project As Per Contract Documents Prepared By An Independent Architect-engineer Firm. capability Statement: respondents Shall Provide A General Capabilities Statement To Include The Following Information: section 1: Provide Company Name, Duns Number And Unique Entity Identifier (uei), Company Address, Point-of-contact Name, Phone Number And Email. section 2: Provide Company Business Size Based On Naics Code 236220. Also, Provide Business Type (i.e., Large Business, Small Business, Service-disabled Veteran Owned Small Business, Small Disadvantaged Business, Women-owned Small Business, Hub Zone Small Business, Etc.). section 3: Provide A Statement Of Interest In The Project. Please State Your Intent To Submit A Bid On This Project If The Only Evaluation Factor Is Price (far Part 14). Please Also State Your Intent To Submit A Proposal If The Solicitation Contains Both Price And Non-price Evaluation Factor (far 15). section 4: Provide The Prime Contractor’s Available Bonding Capacity In The Form Of A Letter Of Intent From Your Bonding Company With This Submission. *please Ensure That The Individual Bonding Capacity Is In Line With The Vaar Magnitude Of Construction Listed Above. Letter Should Include Single Award Limit, Aggregate Limit And Available Bonding Capacity. section 5: Provide The Type Of Work Your Company Has Performed In The Past In Support Of The Same Or Similar Requirement. This Section Is Important As It Will Help To Determine The Type Of Socio-economic Set-aside, If Any. Please Provide The Following In Your Response: no More Than Three (3) Contracts That Your Company Has Performed Within The Last Six (6) Years That Are Of Comparable Size, Complexity, And Scope To This Requirement. Include The Project Name, Project Owner And Contact Information As This Person May Be Contacted For Further Information, Project Scope, Project Size (example: Square Footage), Building Use (example: Medical Facility, Office Building, Etc.), Project Dollar Value, Start And Completion Dates. provide Specific Examples That Relate Aspects Of Previous Projects To The Proposed Project. Describe Specific Technical Skills And Key Personnel Your Company Possess To Perform The Requirements Described Under Description Of Work. describe Your Self-performed** Effort (as Either A Prime Or Subcontractor). Describe Self-performed Work In Terms Of Dollar Value And Description. **self-performed Means Work Performed By The Offeror Themselves, Not Work Performed By Another Company For Them For Any Of The Project Examples Provided. it Is Requested That Interested Contractors Submit A Response (electronic Submission) Of No More Than Eight (8) Single Sided Pages, Single-spaced, 12-point Font Minimum That Addresses The Above Information. This Response Must Be Submitted As A Single Application-generated (not Scanned) Pdf Document That Is Less Than Or Equal To 4mb In Size. Please Note That Hard Copies Will Not Be Accepted. Please Also Include A Cover Page, Which Includes, At A Minimum: The Company’s Name, Address, Unique Entity Identifier (if Available), Socio-economic Status, Point-of-contact Name, Phone Number, And E-mail Address. Responses Must Include The Sources Sought Number And Project Title In The Subject Line Of Their E-mail Response. Submissions (responses) Shall Be Submitted Via Email To The Primary And Secondary Points Of Contact Listed Below By 1-31-2025 At 4:00 Pm Et. No Phone Calls Will Be Accepted. the Capabilities Statement Submitted In Response To This Sources Sought Shall Not Be Considered To Be A Bid Or Proposal. This Notice Is For Information And Planning Purposes Only And Is Neither To Be Construed As A Commitment By The Government Nor Will The Government Pay For Information Solicited. No Evaluation Letters And/or Results Will Be Issued To The Respondents. After Completing Its Analyses, The Government Will Determine Whether To Limit Competition Among The Small Business Categories Listed Above Or Proceed With Full And Open Competition As Other Than Small Business. at This Time No Solicitation Exists; Therefore, Please Do Not Request A Copy Of The Solicitation. If A Solicitation Is Released It Will Be Synopsized In Contract Opportunities At Https://sam.gov/. It Is The Potential Offeror's Responsibility To Monitor This Site For The Release Of Any Solicitation Or Synopsis. contracting Office Address: vha Program Contracting Activity Central (vha-pcac) 6100 Oak Tree Blvd. Suite 490 independence, Oh 44131 primary Point Of Contact: benjamin Niznik contract Specialist benjamin.niznik@va.gov secondary Point Of Contact: samantha Mihaila contracting Officer samantha.mihaila@va.gov

Details: Description Hatchery Supplies And Equipment 1 Lot ₱111,740.00 Coal Tar 3 Gals Dock Hose, 2 Inches Diameter, 100meters/ Roll, Color Red; Best Quality 1 Roll Pvc /corrugated Suction Hose 3"diameter; Best Quality 5 Meters Aircock (100 Pcs./pack) 2 Packs "digital Weighing Scale: Electronic; Table Bench Minimum:0.01 G; Maximum:3 Kg; Heavy Duty " 1 Unit Plastic Utility Pail 18 Liters Cap, (white), Best Quality 6 Ps. Round Plastic Utillity Container With Cover, White, 100-150l Cap.; Best Quality 10 Pcs Fuel Filter (compatible To 40kva Generator Set) 1 Pc Bamboo Ladder (12 Feet.); Best Quality 1 Pc. Fiberglass Extension Ladder, 20 Feet;heavy Duty 1 Pc. Oil Filter (compatible To 40kva Generator Set) 1 Pc Transparent Rubberized Plastic Hose, 3/16" (300m/roll) 1 Roll Chlorine Disinfectant (4liters/gallon;color Red) 25 Gal Chlorine Granules;70%;25-30 Kgs. 1 Container Dextrose Bottle (1 Liter Capacity;);glass 20 Pcs. Marine Epoxy (a&b);non-sag 4 Quarts Combination Wrench Professional Tool Set (61 Pcs.), Heavy Duty 1 Set Pipe Wrench 12";heavy Duty 5 Pcs. Cross Cut Saw, Heavy Duty 2 Pcs Lagarao; Big; Heavy Duty 2 Pcs. Rubber Band (size:#34;l=4",w=1/8",thickness:1/32;350 G/box; Assorted Color, Best Quality 20 Boxes Extension Wire, No.14;cable Reel 50 Meters; 4 Gang; Heavy Duty 2 Unit Agricultural Supplies: 1 Lot ₱41,000.00 Ammonium Sulfate (21-0-0), 50kg/bag; Plain 12 Bags Ammonium Phosphate (16-20-0), 50kg/bag; Plain 7 Bags Urea (46-0-0), 50kg/bag 6 Bags Larval Diet Enrichment 1 Lot ₱56,500.00 "chicken Egg ,size: Large Size @ 30 Pcs./tray Staggard Delivery: 1/2 Tray Or 15 Pcs. Per Month " 5 Trays Cod-liver Oil, Vetinerary Grade;1 Liter 3 Bottles Yeast,instant Dry Yeast;500 G/pack 5 Packs Powderized Mixed Feeds (p. Japonicus #0), 1kg Per Pack 30 Packs Tank Refill 1 Lot ₱9,300.00 Oxygen (refill Only) 3 Tanks Lpg (refill Only) 4 Tanks Hatchery Equipment 1 Lot ₱21,000.00 Water Pump Unit Specifications: Inlet And Outlet Diameter:50 Mm' 2 Inches;pump Lift:23 M;sunction Height:7m; Max Capacity:30 Cu.m/hr.;net Weight 23 Kgs.;dimension: (lxwxh) 485 Mm X380mmx405mm 1 "grass Cutter Specifications: Engine Type: Air-cooled, 4-stroke, Piston Valve Method Gasoline Engine; Maximum Output: 2 Hp; Fuel: Mixture Of Gasoline And Lubricating Oil; Ignition System: Transitionized Flywheel Magneto; Fuel Tank Capacity: 1l" 1 Unit Labor For The Maintenance Of Hatchery Equipment And Hdpe Cage 1 ₱105,000.00 "maintenance For Pumps, Blowers And Filter Tanks Schedule: Every 2 Months Scope Of Work: Repainting, Change Oil, Changing Of Fan Belt, Blower/air Pipe And Fittings Repair, Changing Of Capilla Oil, Pump Lines And Fittings Cleaning And Repair, Filter Box Cleaning" 8 "maintenance For Generator Set Scope Of Work: Change Oil, Changing Of Filter, Changing Of Fan Belt, Battery Replacement" 1 "maintenance For Hdpe Cage (change Net) Schedule: Every Month Scope Of Work: Replacement And Installation Of Net, Washing And/or Removal Of Barnacles; Net Inspection And Net Mending" 12 Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Nothing Follows Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Purpose: For The Official Use For The Operation Of The Multi-species Hatchery For Cy 2025

Details: Description Special Bids And Awards Committee Request For Quotation Rfq No. 2025-030 The Rizal Medical Center (rizal Med) Through Its Special Bids And Awards Committee (sbac), Hereby Invites All Interested Suppliers Or Distributors Registered With The Philippine Government Electronic Procurement System (philgeps), To Submit Their Quotation On The Item Listed Below, Subject To The General Conditions Stated Herein, And Submit Not Later Than 27 January 2025. Name Of Project: Procurement Of Endo Motor With Apex Locator Mode Of Procurement: Negotiated Procurement Sec. 53.9 – Small Value Procurement Approved Budget For The Contract: Seventy Pesos (php70,000.00) Item No. Description Unit Qty Unit Cost (php) Total Abc (php) Endo Motor With Apex Locator Standard Configuration: 1. Main Unit 1 Pcs 2. Measurement Cable 1 Pcs 3. File Clip 2 Pcs 4. Tester 2 Pcs 5. Lip Hook 5 Pcs 6. Label 1 Pcs 7. Charger 1 Pcs Battery: 7.2v/1400mah Adapter: 100v-240v 0.8a 50hz/60hz Revolving Speed: 200-600rpm Torsion: 0.6-4.0n.cm Buzzer Alert: The Buzzer Will Alert When The File Is Less Than Dimensions: 250mm*210mm*140mm Unit 1 70,000.00 70,000.00 I. General Requirements: 1. Original Signed Price Quotation 2. Certified True Copy Of The Following: A) Philgeps Certificate B) Mayor’s/business Permit C) Income/business Tax Return (for Abcs Above 500k) D) Valid License To Operate Issued By Philippines Food And Drug Administration E) Certificate Of Product Registration/ Certificate Of Non-registrable/ Certificate Of Product Notification / Certificate Of Medical Device Notification F) Certificate Of Distributorship (manufacturer’s Authority) Or Sub-distributorship Certificate / Agreement From The Distributor. 3. Duly Notarized Omnibus Sworn Statement Together With Original Notarized Secretary’s Certificate Or Original Special Power Of Attorney 4. Warranty Certificate: 5. Product Description/ Brochure. 6. Documentary Requirements Must Be Submitted To The Sbac Secretariat Not Later Than The Deadline. Ii. General Conditions: • The Monthly Billing Statement With Complete Documentary Requirements Must Be Provided By The Service Provider A Week After The Applicable Month • All Quotations Shall Be Considered Fixed Price, And Not Subject To Price Escalation During Contract Implementation. • Supplier/contractor/ Service Provider Is Entitled To One (1) Quotation Only; Otherwise, All Quotations Made Shall Automatically Be Rejected. Iii. Terms Of Payment • Payment Shall Be Based On Actual Deliveries Made By The Supplier/contractor/ Service Provider. • The Terms Of Payment Shall Not Be Later Than Sixty (60) Days After Submission Of Sales Invoice And Complete Supporting Documents By The Supplier/contractor. • Pursuant To Circular Letter No. 2013-16 Of Department Of Budget And Management Dated December 23, 2013, The Supplier/contractor Is Encouraged To Open An Account With The Land Bank Of The Philippines (lbp), The Government Servicing Bank Of The Procuring Entity, To Facilitate Settlement Of Account Payables Due To The Supplier/contractor. All Charges Incurred For Payment Through Bank Transfer With Other Banks Shall Be For The Account Of The Supplier/contractor. Iv. Delivery Term • Delivery Term Shall Be Within Thirty (30) Calendar Days Upon Receipt Of Notice To Proceed. For Further Inquiries, You May Contact The Sbac Secretariat At Mobile No. 0917 104-6556. The Quotation And Requirements Must Be Submitted/delivered To The Following Address: Jacquelyn M. Perez, Llb Head, Sbac Secretariat Rizal Medical Center Pasig Blvd., Pasig City 1600 Mobile No. 0917 104-6556 Email Address: Sbac@rmc.doh.gov.ph The Rizal Med Reserves The Right To Reject Any Or All Quotations/bids, To Waive Any Minor Defects Therein, To Annul The Bidding Process, To Reject All Quotations/bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder(s), And To Accept Only The Offer That Is Most Advantageous To The Government. The Rizal Med Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Quotation/bid. Very Truly Yours, (sgd). Ruth G. Valeriano, Md, Ffps, Fcnsp, Fpna Chairperson, Special Bids And Awards Committee

Details: Description Fabrication, Improvement, Installation And Materials For Post Harvest Equipment (fiberglass/stainless Steel Equipment And Etc.) 1 Lot Elevated Solar Dryer (l=1.5m, H=1.5m, W=0.80m) With 12 Individual Drying Trays 1 Unit Frames Made Of Aluminum Square Tubings, Angle Bars And Flat Bars Platform For Drying Tray Made Of Aluminum Expanded Wire Top Cover Made Of Acrylic Sheet Fully Secured Using Aluminum Angle Bars Covering Materials For Side Walls Made Of Stucco Embosed Aluminum Sheets Bottom Cover Made Of Perforated Aluminum Sheet (circular Perforations) Upper Ventilation Covered With Stainless Steel Wire Mesh Screen All Accessories For Door Such As Hinges, Handle And Latch Made Of Stainless Steel Free Delivery On-site Please See The Attached Drawings For More Details Of The Specifications Motorcycle Fishbox With Bracket (customized) 4 Units Chest Cooler, 50qt Capacity, Wheeled And Durable; Free Delivery On-site 1 Pc Post Harvest Materials 1 Lot Food Dehydrator 2 Units Dimensions: 0.51m(l) X 0.41m(w) X 0.67m(h) Material: 304 Stainless Steel 20 Layers Voltage: 220v With Philippine Standard (ps) Mark/import Commodity Clearance (icc) Sticker Free Delivery On-site Insulated Fish Containers 8 Units Material: Food Grade Medium Density Polyethylene (mdpe) Resin With Uv Stabilizer; Process: Rotationally Molded; Insulator: Polyurethane Foam; 50 Liters Capacity, Color Blue, 0.535m X 0.487m X 0.450m With Engrave Bfar Logo, Foam Insulated Free Delivery On-site Please See The Attached Drawings For More Details Of The Specifications Electronic Digital Weighing Scale 30kg Capacity, Table Top 1 Unit Max. Weight: 30kg; With 5g Graduation Rechargeable: More Than 5 Days Lifespan Power Source: Either 220v Or 3 Pcs Size D; Display: Led Screen Table Size: 330x240mm; Waterproof Strong Base, Thickened Weighing Pan High Quality Sensor With Greater Measurement Capabilities Charging Voltage: 220-240v 50/60hz With Philippine Standard (ps) Mark/import Commodity Clearance (icc) Sticker; Free Delivery On-site Single Burner Heavy Duty Cast Iron Gas Stove With 11 Kg. Lpg Tank & Accessories 1 Unit Superior Heat Efficiency, Automatic Ignition Switch, Suitable For Indoor And Outdoor Use Burner Size: 31a 60cm X 34cm Hose: 1.2m Free Delivery On-site Refrigeration Equipment & Accessories 1 Lot Chest Freezer-inverter, 10.6 Cu.ft 1 Unit Solid Door With Sliding Glass Interior Light (led Light) With Four Wheel Roller Warranty: 2 Years On Parts And Labor: 5 Years On Compressor Free Delivery To Bfar Xi, Pfo-davao Occidental Fishing Supplies And Materials For Semi Commercial - Payao (1 Unit) 1 Lot P.e Rope #36, 18mm, 200m/roll 12 Rolls P.e Rope #16, 8mm, 200m/roll 1 Roll Stainless Swivel 3/4" X 6" Dia 1 Pc Rubber Tire Strips, 2" (15m/roll) 2 Rolls Rubber Tire Ring #17" Θ 33 Pcs Cable Wire #14, Galvanize 33 Meters Concrete Mooring, (customized: 20"x16"x24", Solid, With Tire Ring (9cm Width; 2.3 Cm Thickness); Weigth-1000kgs/piece 4 Pcs Mononylon 180lbs, (5rolls/kg) Durable, Strong, Glossy, Proven And Tested, With Long Life-span High Quality 1.5 Kgs Tie Wire No. 14, Galvanized Iron 27.5 Kgs Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Nothing Follows Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Purpose: To Be Used For Post Harvest, Fish Processing Operation And Replacement Of Materials For Damaged Semi Commercial Payao Under The Saad Phase Ii Project Implementation In Davao Occidental For Cy 2025.