Cable Tenders

Details: Description Supply Of Dental Chairs And Units For The College Of Dentistry (rebid) Dental Chair Specifications  Brand New  Electromechanical Type With Wide Back And Full Lumbar Support  Ambidextrous - Chair Can Be Mounted On Either Left Or Right Side  Maximum Capacity Of 200 Kg  Chair Can Swivel To The Right (at 30 Degrees) Or To The Left (at 30 Degrees) For Ease Of Access Doctor’s Table  Swivel Bar For Easy Positioning And Access To Control Panels  Electromechanical Motor With Heavy Weight Capacity And Adjustable Movement Speed  Prevent Tubings From Clogging And Easy For Replacement; Reduce The Risk Of Cross-infection  Main Cleaning Switch Removes Impurities From Handpiece Tubing And Protects Handpiece  Master Switches For Air And Water Armrests  Rotating Armrests  2 Armrests For The Left And Right Arm Foot Control  Two (2) Separate Foot Controls: O 1 Multi-functional Foot Control Pedal With Three Sets Of Sitting Position And 1 Set Of Gargling Position Memory O 1 Disc-type Foot Control For Handpieces Dental Operatory Light  Led Sensor Light  Adjustable Luminance Ranges From 8,000 Lux To 24,000 Lux, 4,500 Degrees Kelvin  Arm Joints With Bearing For Smooth Movement. Delivery System  Chair-mounted Delivery System  Asepsis Automatic Control For Three Handpieces With Syringe  Individual Handpiece Pressure Adjustments  Non-retracting Water Coolant With On/off  Individual Water Coolant Flow Controls  Air Coolant Flow Control  Handpiece Tubing Flush System  2-hole Straight Gray Asepsis Tubing With Connector  Stainless Steel Tray With Non-skid Pad  Disc Foot Control Wet/dry Toggle With 7’ Of Smooth Tubing  Equipment Utility Center With Asepsis Housing  Vacuum Canister With Solids Collector Screen  Straight Light Post For Unit Mount Dental Light  Pre-wiring For Fiber Optic Light Source (fiber Optic Ready)  Air-actuated Counterbalanced Arm Lock  Durable Tubings Of Air, Water, Hand Piece And Solenoid And 3-way Syringe  Anti-suction / Anti-retraction System For Hand Piece Tubings To Prevent Cross-infection  Equipped With Tubing Disinfection System And Sterilization Function. Assistant’s Side  Assistant Position With Full Function Control Panel  Movable Assistant’s Instrument Holder With Air System For Saliva Ejector And Suction. Cuspidor  Porcelain  Auto Water Supply System With Adjustable Timed Bowl Rinse With Push-button Cup Filler  180° Rotatable, Hygienic Spittoon Base, Easy To Clean And Disinfect  1.5l Volume Pure Water Supply System  With Self-contained Water System With City/bottle Selector  With Water Outlets With Flow Control And Air Outlet With Flow Control  With Vacuum Canister With Solid Collector Screen Accessories  1 Pc. - Highspeed Handpiece (2-holes)  1 Pc. - Lowspeed Handpiece With Straight Nose And Contra Angle (2-holes)  2 Pc. - Autoclavable, Quick Disconnect Three-way Syringe  1 Pc. - Doctor’s Stool  1 Pc. - Assistant’s Stool  1 Pc. - Clean Water System  1 Built-in Ultrasonic Scaler With 6 Tips  Intra-oral Camera With Monitor (10 Mp Intraoral Camera With Hd Macro Lens Focus, 17” Monitor That Supports Contrast And Image Color Selection, 8gb Sd Card) Warranty  Five (5) Years Warranty On The Chair’s Motor  Two (2) Years Other Parts, Service And Labor Warranty  Lifetime Technical Support Additional Specifications  Cover Delivery Of Chairs, Dismantling Of Old Chairs, Installation Of New Chairs  Guaranteed Availability Of Parts For 10 Years  Air Valve, Water Valve, Electrical Supply And Drain Should Be At The Base And Not Exposed For Safety Terms And Conditions 1. Indicate Brand, Model And Country Of Origin. 2. Notarized Certificate That The Product Is Brand New, Not Reconditioned/refurbished Including Parts And Accessories. 3. Delivery And Installation Should Be Done Within Ninety (90) Calendar Days Commencing On The Date Of Receipt Of Purchase Order And Notice To Proceed. Notification By Email And Acknowledged By The Supplier Constitutes Date Of Acceptance. The Equipment Must Be Delivered Ready To Use. Cables, Connectors, Adapters And Accessories Even Not Specified But Are Essential For The Unit To Function Must Be Provided Free By The Winning Bidder. 4. Certification From At Least Three (3) Government And /or Private Agencies Within Metro Manila Or The Philippines That They Have Been Supplied With The Same Brand Being Offered. 5. Undertaking To Provide Product Orientation And Operations Training For End-user And Troubleshooting Training For Technician’s/research Staff. 6. Warranty Should Be At Least Five (5) Years For Service And Two (2) Years On Parts. 7. Warranty Period Shall Commence From The Date Of Acceptance By The End-user, Testing And Commissioning. 8. Provide Regular Quarterly Preventive Maintenance And Calibration During The Warranty Period. 9. A Notarized Certification From The Manufacturer That The Bidder Is An Authorized Distributor Of The Equipment. 10. Notarized Certification From The Manufacturer And Local Distributor That In The Event Of A Change Of Local Distributor, Preventive Maintenance, Warranty And Services Agreed Here Upon Will Be Honored By The Principal Manufacturer. 11. Notarized Certification That The Local Distributor And The Manufacturer Have Been In Business Relationship Of Providing That Said Equipment For At Least Five (5) Years. 12. Notarized Certification Accompanied With Proof That The Bidder Is In The Business Of Supplying The Unit/item For The Last Five (5) Years. 13. Guarantee Letter Or Certificate From The Manufacturer And Local Distributor To Ensure The Availability Of Parts, Supplies And Accessories And Will Not Be Discontinued For The Next Five (5) Years. 14. Provide Separate Quotation For Maintenance, Repair And Replacement Of Parts After Warranty Period. 15. Provide Operator’s & Service Manual (in English Language) Upon Delivery. 16. The Bidder Must Submit Certification That They Have A Capability For Corrective And Preventive Maintenance Of The Unit Or Have A Service Center Within Metro Manila. 17. Must Guarantee That Diagnostic Technician Will Be Able To Assess The Unit Within 24 Hours Of Notification (if Applicable). 18. Automatic Provision Of A Functioning Service Unit (same Model Or Higher) In Case Repair Of More Than 3 Days/pull Out Of The Purchased Unit During The Warranty Period. 19. The Winning Bidder Will Be Responsible For All Fees For Performance Testing, Delivery, Installation And Commissioning The Unit (if Applicable). 20. Specific Place Of Delivery: Upcd Operative Dentistry Section Clininc. In Case Of Large Equipment, The End-user Should Issue A Certification, Noted By The Dean/director, That The Identified Space Is Available. 21. Terms Of Payment: Payment Must Only Be Made After The Appropriate Inspection And Acceptance Procedures, As Mandated By Existing Government Rules And Regulations, Have Been Complied With By The Procuring Entity.

Details: Description Please Quote Your Best Offer/proposal For The Item/s Listed Below: Production Of Customized Gadget Travel Organizer Pouch With Multiple Slots Specifications: Material: Polywash Dimensions: 24 Cm X 18 Cm X 9.5cm Color: Black Process: High Quality Silkscreen Logo Printing Special Feature: Multiple Slots For Usb, Cables, Chargers And Powerbanks Design: To Be Provided By Nast Logo Size: 1 Logo (5cm) Quantity: 200 Pcs Abc: P89,140.00 Sealed Quotation/proposal May Be Sent Or Delivered To: The Chair, Nast Bids And Awards Committee National Academy Of Science And Technology 3rd Level Science Heritage Building, Dost Compound Bicutan, Taguig City The Deadline For Submission Of Quotation Is On November 27, 2024 At 12:00 Nn. Ms. Virginia Francia O. Gavica Administrative Officer Iii Nast-bac Secretariat   Notes: 1. All Entries Must Be Typewritten And Signed By The Company’s Authorized Representative. 2. Price Validity Shall Be For A Period Of Fifteen (15) Calendar Days. 3. Nast Reserves The Right To Accept Or Reject Any Or All Quotations And To Impose Additional Terms And Conditions It May Deem Proper. 4. Suppliers/contractors Must Submit The Eligibility Requirements Listed Below Together With Their Quotation/proposal. 5. This Is A Negotiated Procurement/small Value Procurement Because The Abc Is Less Than P1,000,000.00. Sample Design Note: For Sample Purposes Only. Please Follow The Specifications Provided. Thank You. Color: Black   List Of Eligibility Requirements (to Be Submitted Together With The Quotation) 1. Mayor’s Permit (latest) 2. Certificate Of Philgeps Registration/philgeps Registration Number. 3. Income/business Tax Return. 4. Bir Certificate Of Registration 5. Tax Clearance 6. Omnibus Sworn Statement Omnibus Sworn Statement (revised) [shall Be Submitted With The Bid] ______________________________________________________________________ Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code.   In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ____________, Philippines. [insert Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Affiant [jurat] [format Shall Be Based On The Latest Rules On Notarial Practice]

Details: Description Quantity Unit Item Description 1 Lot Procurement Of Integrated Full Mission Bridge And Engine Room Simulator With Desktop Station Full Mission Bridge Simulator (fmbs) And Mini Bridge Stations’ Features And Applications, Major Components, Bridge Simulator Performance Standards And Hardware 1. Major Components The Full Mission Bridge Simulators That Can Be Integrated With Engine Simulators Shall Consist Of The Following Major Components: A. One (1) Full Mission Bridge Station With 270° Horizontal Display (class A Configuration); B. Seven (7) Mini Bridge Stations With 120° Horizontal Display (class B Configuration); C. One (1) Server Station; D. One (1) Instructor Station; E. One (1) Simulator Scenario Development Station; And F. One (1) Briefing/ Debriefing Station. 2. Features And Applications 2.1 The Bridge Simulator Should Provide A Realistic, Ship-like Environment Based On Real Hardware Consoles And High-quality Visualization. The Systems Include Major Components Such As Conning, Radar/ Arpa And Ecdis, Gmdss, Navigation Equipment, Bearing Finder, Steering Control Console, Engine Control, Auto Pilot System, Overhead Display, Etc. 2.2 The Bridge Simulator Product Shall Be Certified And Compliant As Class A (full Mission), B (multi-task), C (limited Task), And D (cloud-based Distant Learning) Type-approved Maritime Simulator System By An Internationally Recognized Classification Society. The Compliance With Classification Shall Be Reflected In The Certificate Of The Product. 2.3 The Simulator Can Be Utilized To A Variety Of Navigation Techniques Under Different Environmental Conditions, Serving A Wide Range Of Purposes As Follows: 1. Control Of The Ship While Navigating In The Operational And Emergency Modes In Various Weather Conditions With The Possibility Of Setting Wind And Current Parameters; 2. Analysis Of The Above-water Situation In Day And Night Conditions; In Poor Visibility By Visible Navigation Lights And Information Received From Radar/ Arpa; 3. Use Of The Electronic Chart-based Navigational Information System (ecdis); 4. Practical Use Of Radio Equipment And Global Maritime Distress And Safety System (gmdss) Facilities; 5. Application Of The International Regulations For Preventing Collisions At Sea; 6. Ship Control During Anchoring And Mooring; 7. Ship Control During Towing Operations; 8. Ship Control During Maneuvers "man Overboard"; 9. Rational Methods Of Ship Control In Case Of Main Engines (me) And Ship And Navigation Equipment Failures During Movement; 10. Eye Survey Of Above-water And Radar Situation, Determination Of Vessel Movement Elements; 11. Navigational Situation Assessment By Visual Observation During Daytime, By Lights At Night Time And By Observation Of Transmission Of Echo Signals On Ppi Simulators In Conditions Of Limited Visibility; 12. Visual Determination Of Vessel Movement Patterns, Maneuvering Capabilities And Dimensions; 13. Selection And Execution Of Collision Avoidance Maneuvers In Open Sea, During Night And In Limited Visibility Conditions Using Radar/arpa; 14. Evaluation Of Accuracy Of Primary And Secondary Information Received From Arpa, Consideration Of Factors Affecting Accuracy Of Arpa And Delay In Formation Of Secondary Radar Information; 15. Orientation Of Ships In Complex Navigation Conditions In Daytime And Nighttime And In Conditions Of Limited Visibility; 16. Use Of Ecdis For Preliminary And Executive Plotting, Practicing Correct Response To Emergency Signals Produced By Ecdis, Solution Of Chart-metric Tasks And Ensuring Safety Of Navigation With The Use Of Information Received From Ecdis; 17. Use Of Basic Capabilities Of Marine Mobile Service And Marine Mobile Satellite Service. 2.4 The Bridge Simulator Product Shall Be Able To Address The Following Stcw Competencies And Shall Be Reflected In The Certificate. · Table A-ii/1.1 - Plan And Conduct A Passage And Determine Position. • Table A-ii/1.2 - Maintain A Safe Navigational Watch. • Table A-ii/1.3 - Use Of Radar And Arpa To Maintain Safety Of Navigation. § Table A-ii/1.4 - Use Of Ecdis To Maintain The Safety Of Navigation. • Table A-ii/1.5 - Respond To Emergencies. • Table A-ii/1.6 - Respond To A Distress Signal At Sea. • Table A-ii/1.8 - Transmit And Receive Information By Visual Signaling. • Table A-ii/1.9 - Manoeuvre The Ship. • Table A-ii/2.1 - Plan A Voyage And Conduct Navigation. • Table A-ii/2.2 - Determine Position And The Accuracy Of Resultant Position Fix By Any Means. • Table A-ii/2.3 - Determine And Allow For Compass Errors. • Table A-ii/2.4 - Co-ordinate Search And Rescue Operations. • Table A-ii/2.5 - Establish Watchkeeping Arrangements And Procedures. • Table A-ii/2.6 - Maintain Safe Navigation Through The Use Of Information From Navigation Equipment And Systems To Assist Command Decision-making. • Table A-ii/2.7 - Maintain The Safety Of Navigation Through The Use Of Ecdis And Associated Navigation Systems To Assist Command Decision Making. • Table A-ii/2.10 - Maneuver And Handle A Ship In All Conditions. • Table A-ii/2.11 - Operate Remote Controls Of Propulsion Plant And Engineering Systems And Services. • Table A-ii/3.1 - Plan And Conduct A Coastal Passage And Determine Position. • Table A-ii/3.2 - Maintain A Safe Navigational Watch. • Table A-ii/3.3 - Respond To Emergencies. • Table A-ii/3.4 - Respond To A Distress Signal At Sea. • Table A-ii/3.5 - Manoeuvre The Ship And Operate Small Ship Power Plants. • Table A-ii/4.1 - Steer The Ship And Also Comply With Helm Orders In The English Language. • Table A-ii/4.2 - Keep A Proper Look-out By Sight And Hearing. § Table A-ii/5.2 - Contribute To Berthing, Anchoring And Other Mooring Operations. • Table A-v/4-1.1 - Contribute To Safe Operation Of Vessels Operating In Polar Waters. • Table A-v/4-1.2 - Monitor And Ensure Compliance With Legislative Requirements. • Table A-v/4-1.3 - Apply Safe Working Practices, Respond To Emergencies. • Table A-v/4-1.4 - Ensure Compliance With Pollution-prevention Requirements And Prevent Environmental Hazards. • Table A-v/4-2.1 - Plan And Conduct A Voyage In Polar Waters. • Table A-v/4-2.2 - Manage The Safe Operation Of Vessels Operating In Polar Waters. • Table A-v/4-2.3 - Maintain Safety Of The Ship's Crew And Passengers And The Operational Condition Of Life- Saving, Firefighting And Other Safety Systems. 2.5 The Bridge Simulator Shall Allow For Training And Certification Of Watch Officers, Chief Officers, Captains, And Pilots Serving On Commercial And Fishing Vessels Of 500 Gross Tonnage Or More In Accordance With The Requirements Of The Imo Stcw Convention And Model Courses: · 1.07 – Radar Navigation, Radar Plotting And Use Of Arpa; · 1.08 – Radar, Arpa, Bridge Teamwork And Search & Rescue; · 1.22 – Ship Simulator And Bridge Teamwork; · 1.27 – Operational Use Of Electronic Chart Display And Information System (ecdis); · 1.32 – Operational Use Of Integrated Bridge System; · 1.34 – Operational Use Of Ais; · 2.02 – Maritime Sar Coordinator; · 3.11 – Marine Accident And Incident Investigation With Compendium; · 3.19 – Ship Security Officer; · 3.23 – Actions To Be Taken To Prevent Acts Of Piracy And Armed Robbery; · 7.01 – Master And Chief Mate; · 7.03 – Officer In Charge Of Navigational Watch; · 7.05 – Officer In Charge Of Navigational Watch Of Fishing Vessel; · 1.25 – General Operator’s Certificate For The Gmdss; · 1.26 – Restricted Operator’s Certificate For The Gmdss. 2.6 The Bridge Simulator Shall Have All The Ownship Models, Target Ship Models , Objects And Exercise Areas Available In The Database Of The Simulator Product. It Shall Also Include Polar Areas, The Existing Models And Areas In Current Simulator, Naval And Coast Guard Ship Models, Ship Models Ready For Integration With Engine Simulators And Ship/engine Models Using Future Fuels. 2.7 The Simulator Shall Have Intercom Installed In The Instructor Station And All Bridge Stations. 2.8 The Simulator Shall Have An Evaluation And Assessment Method Designed For The Evaluation And Assessment Of A Range Of Predefined Assessment Parameters From The Following Categories: • Planning And Conducting A Passage And Determine Position; • Maintain Safe Navigational Watch; • Using Radar And Arpa To Maintain Navigational Safety; • Ability To Operate And Analyze Information Obtained From Arpa; • Respond To Emergencies; • Use Imo Standard Marine Communication Phrases And Use English Inwriting And Speaking; • Transmit And Receive Information Using Visual Signals; • Maneuver The Ship; • Colreg. 2.9 The Simulator Shall Have The Ability To Set Up A Scoring And Grading System To Evaluate The Operator’s Performance. The Program Allows The Instructor To Monitor The Results Of The Bridge Team / Operator Workstation Performance. 2.10 The Simulator Shall Be Capable Of Simulating Ship Operation In Polar Waters Or Ice Navigation According To The Polar Code And Shall Have The Following Training Capabilities: - Ice Management Of Offshore Installations In An Arctic Environment, - Use Of Radar Data And Ice Charts In Ecdis While Navigating In Ice Conditions, - Following Of Icebreakers, - Offshore Loading Operations To Include Mooring To Single Point Mooring And Floating Production Storage And Offloading Equipment In Ice Conditions, And - Navigation In Shattered Ice, Along Hard Ice Edges, Bumping Against Ice Edges, In Open Pack Ice, In Ice Holes, And Spots Of Ice-free Water. 2.11 The Ice Navigation Environment Shall Have The Following Characteristics: - Capable Of Ice Accumulation On Ship Superstructure, - Ship’s Tracks On Ice Fields Re-freeze As Programmed By The User, - Ice Mounds And Channels Can Be Added By The User, - Characteristics Of Ice Resistance Are Based On The Type Of Ice, Thickness, And Accumulation, - Capable Of Traversing Large Ice Areas, And - Realistic Representation Of Iceberg Objects. 3. Bridge Simulator Performance Standards 3.1 Physical Realism The Bridge Simulator Stations Shall Have The Following Physical Realism: A. The Equipment, Consoles, And Workstations Shall Be Installed, Mounted, And Arranged In A Manner That Mimics An Actual Bridge Of A Ship. B. The Workstations Shall Have Standard Rubber Mat Flooring. The Simulator Shall Have The Following Equipment: C. Controls Of Propulsion Plant Operations, Including Engine Telegraph, Pitch-control And Thrusters. There Shall Be Indicators For Shaft(s) Revolutions And Pitch Of Propeller(s). There Shall Be Controls For At Least One Propeller And One Bow Thruster. D. Controls Of Propulsion Plant For Mooring Operations. By Any Method, It Shall Be Possible To Observe The Ship's Side And The Dock During Operation Of Such Controls. E. Controls Of Auxiliary Machinery. There Shall Be Controls For At Least Two Auxiliary Engines, Including Electric Power Supply Control. F. Steering Console, Including Equipment For Hand Steering And Automatic Steering With Controls For Switchover. There Shall Be Indicators Of Rudder Angle And Rate Of Turn. G. Steering Compass And Bearing Compass (or Repeater) With An Accuracy Of At Least 1 Degree. H. At Least One Radar/arpa Display/unit (automatic Radar Plotting Aid). It Shall Be Possible To Simulate Both A 10 Cm (s-band) And A 3 Cm (x-band) Radars. The Radar Shall Be Capable To Operate In The Stabilised Relative-motion Mode And Sea- And Ground-stabilised True-motion Modes (see Stcw Section A-1/12.4.1 And 1/12.5 And Paragraph 2 Of Section B-i/12). I. Communication Equipment Per Gmdss (global Maritime Distress Safety System) Framework, Covering At Least The Requirements For The Relevant Area. J. The Simulator Shall Include A Communications System That Will Allow For Internal Ship Communications To Be Conducted. K. Ecdis (electronic Chart Display And Information System) Displaying Selected Information From A System Electronic Navigational Chart (senc) With Positional Information From Navigation Sensors Like Ais And Radar To Assist The Mariner In Route Planning And Route Monitoring, And By Displaying Additional Navigation-related Information. (see Stcw Section B-i/12). L. Gps (global Positioning System), Echo-sounder And Speed Log Showing Speed Through The Water (1 Axis) For Ships Below 50,000 Grt And In Addition Speed And Distance Over Ground In Forward And Athwart Ship Direction For Ships Above 50,000 Grt. M. Instrument (anemometer) For Indication Of Relative Wind- Direction And Force. N. Ship Sound Signal Control Panel According To Colreg. O. Instrument For Indication Of Navigational Lights. P. Function For Transmitting Visual Signals (morse Light). Q. Control System For General Alarm And Fire Detection/alarm And Other Alarms. R. Ais (automatic Identification System). S. Ship-borne Meteorological Instrument. The Simulator Shall Have The Following Additional Requirements For Training In Ice Navigation: T. Controls For Propulsion Plant Operations, Including Engine Telegraph, Pitch Control, And Thrusters. There Shall Be Indicators For Shaft Revolutions And Pitch Of Propeller. There Shall Be Controls For At Least One Propeller And One Bow Thruster. U. Two Speed And Distance Measuring Devices. Each Device Should Operate On A Different Principle, And At Least One Device Should Be Capable Of Being Operated In Both The Sea And The Ground Stabilized Mode. V. Searchlight Controllable From Conning Positions. W. Manually Operated Flashing Red Light Visible From Astern To Indicate When The Ship Is Stopped. X. Vdr (voyage Data Recorder) Or Capability For Vessel History Track And Learner Actions Log From The Instructor And The Assessor Position. Y. Equipment Capable Of Receiving Ice, Icing Warnings, And Weather Information Charts. Z. Anchoring And Towing Arrangements. The Simulator Shall Have The Following Additional Requirements For Training In Integrated Bridge Systems Including Integrated Navigation Systems: Aa. Workstation For Navigating, Maneuvering And Monitoring Consisting Of: · Radar/arpa · Ecdis · Conning Display · Binoculars Control · Autopilot Control · Observer Position/ Visual Control · Information On Position-fixing Systems · Information On Ship Automatic Identification System (ais) · Heading Control System · Flags, Daytime Shapes And Sound Signals · Control For The Main Engine Including Emergency Stop · Control For The Main Rudder Using Helm · Controls For Thruster · Two-way Vhf Radiotelephone (walkie-talkie) With Charging Connection · Internal Communication Equipment · Public Address System · Vhf With Channel Selector · Remote Control For Searchlight · Rudder Pump Selector Switch · Steering Mode Selector Switch · Steering Position Selector Switch · Illumination Of Equipment And Displays In The Surrounding Darkness · Sound Reception System · Acknowledgment Of The Watch Alarm · Controls For Console Lighting · Indicators For: - Propeller Revolutions (actual And Desired) - Main Engine Revolution In The Case Of Reduction Geared Engine - Propeller Pitch In The Case Of Controllable Pitch Propeller - Torque - Starting Air - Lateral Thrust - Speed - Rudder Angle - Rate-of-turn - Gyro Compass Heading - Magnetic Compass Heading - Heading Reminder (pre-set Heading) - Water Depth Including Depth Warning Adjustment - Time - Wind Direction And Velocity - Air And Water Temperature - Clinometer - Alarms · Signal Transmitter For: - Whistle - Automatic Device For Fog Signals - Alarms, (general Alarm, Emergency Alarm, Etc.) - Morse Signaling Light Bb. Workstation For Manual Steering (wheelhouse) Consisting Of: · Steering Wheel · Rudder Pump Selector Switch · Indications For: - Gyro Compass Heading - Magnetic Compass Heading - Pre-set Heading - Rudder Angle - Rate Of Turn Cc. Workstation For Planning And Documentation Consisting Of: · Ecdis Including Navigation Planning Station · Route Planning Devices · Chart Table · Paper Charts · Plotting Aids Dd. Workstation For Communications Consisting Of: · Gmdss Equipment As Required For The Applicable Sea Area · Vhf-dsc, Radiotelephone · Mf-dsc, Radiotelephone · Mf/hf-dsc, Nbdp, Radiotelephone · Mf/hf Mf/hf Radio Telex · Inmarsat-ses, Egc Rx With Lrit And Ssas · Navtex/egc/hf Direct Printing Telegraph · Fbb/iridium · Cospas-sarsat Epirb · Sart · Ais Sart · Main Station For Two-way Vhf Radiotelephone · Aircraft Vhf Radiotelephone · Gmdss Alarm Panel · Radio Direction Finder Rt-500-m (marine) · Power Switchboard · Battery Charger · Virtual Printer Ee. All Systems Related To The Integrated Bridge System Shall Include Failure Control(s) And Method(s) To Train And Assess The Learner In The Use Of Advanced Equipment, Technology And Enable Familiarization And Training To Understand The Limitations Of Automatic Systems. 3.2 Behavioral Realism The Bridge Simulator Stations Shall Have The Following Behavioral Realism: A. The Simulation Of Ownship Shall Be Based On A Mathematical Model With 6 Degrees Of Freedom. B. The Model Shall Realistically Simulate Own Ship Hydrodynamics In Open Water Conditions, Including The Effects Of Wind Forces, Wave Forces, Tidal Stream And Currents. C. The Model Shall Realistically Simulate Own Ship Hydrodynamics In Restricted Waterways, Including Shallow Water And Bank Effects, Interaction With Other Ships And Direct, Counter And Sheer Currents. D. The Simulator Shall Include Mathematical Models Of Different The Types Of Ownships. E. The Simulator Shall Include Tug Models That Can Realistically Simulate Tug Assistance During Maneuvering And Escort Operations. It Shall Be Possible To Simulate Pull, Push, Reposition Towing And Escorting. F. The Simulator Shall Include Exercise Areas Including Correct Data For Landmass, Depth, Buoys, Tidal Streams And Visual As Appropriate To The Nautical Chart And Publication Used For The Relevant Training Objectives. G. The Radar Simulation Equipment Shall Be Capable Of Model Weather, Tidal Streams, Current, Shadow Sectors, Spurious And False Echoes And Other Propagation Effects, And Generate Coastlines, Navigational Buoys And Search And Rescue Transponders. H. The Arpa Simulation Equipment Shall Incorporate The Facilities For: - Manual And Automatic Target Acquisition - Fast Track Information - Use Of Exclusion Areas - Vector/graphic Time-scale And Data Display - Trial Maneuvers. I. The Ecdis Simulation Equipment Shall Incorporate The Facilities For: - Integration With Other Navigation Systems - Own Position - Sea Area Display - Mode And Orientation - Chart Data Displayed - Route Monitoring - User-created Information Layers - Contacts (when Interfaced With Ais And/or Radar Tracking) - Radar Overlay Functions. J. The Simulator Shall Provide An Own Ship Engine Sound, Reflecting The Power Output. K. The Simulator Shall Provide Capabilities For Realistically Conduct Anchoring Operations. L. The Model Shall Realistically Simulate Own Ship Hydrodynamics In Interaction With Applicable Anchor And Chain Dimensions With Different Bottom Holding Grounds, Including The Effects Of Wind Forces, Wave Forces, Tidal Stream And Currents. M. The Simulator Shall Provide Capabilities For Realistically Simulate The Function Of Mooring And Tug Lines And How Each Line Functions As Part Of An Overall System Taking Into Account The Capacities, Safe Working Loads, And Breaking Strengths Of Mooring Equipment Including Mooring Wires, Synthetic And Fiber Lines, Winches, Anchor Windlasses, Capstans, Bitts, Chocks And Bollards. The Simulator Shall Have The Following Additional Requirements For Training In Ice Navigation: N. The Own Ship Model Shall Realistically Simulate Hydrodynamics In Interaction With Solid Ice Edge. O. The Own Ship Model Shall Realistically Simulate Hydrodynamics And Ice Pressure In Interaction With Solid And Packed Ice. Ship Motion In Solid Ice Should Affect At Least Ship Speed And Turning Radius. P. The Own Ship Model Shall Realistically Simulate The Effects Of Reduced Stability As A Consequence Of Ice Accretion. Q. It Shall Be Possible To Simulate The Effect Of The Following Ice Conditions With Variations: - Ice Type - Ice Concentration - Ice Thickness. R. It Shall Be Possible To Realistically Simulate The Towing Of Ownship – Ownship, And Own Ship Target Ship And Target Ownship. It Shall Be Possible To Introduce Different Towing Gear Like Rope Or Steel Wire With Different Strength And Elasticity, Forward, Stern And Side Towing. S. It Shall Be Possible To Realistically Simulate The Interaction Between The Ships Propeller Wash And The Ice. T. It Shall Be Possible To Realistically Simulate Ice Drift. U. The Simulator Shall Be Equipped With Iceberg Targets Of At Least Six Different Sizes Including Realistic Underwater Bodies Which Interacts With The Sea Bottom. The Icebergs Should Be Visible On The Ship's Radar. V. Motion Through Ice Hummocks Should Be Simulated Realistically Considering Ship Icebreaking Capabilities And Affect Ship's Speed, Roll And Pitch. The Simulator Shall Have The Following Additional Requirements For Training In Integrated Bridge Systems Including Integrated Navigation System: W. The Integrated Navigation System Should Combine Process And Evaluate Data From All Sensors In Use. The Integrity Of Data From Different Sensors Should Be Evaluated Prior To Distribution. X. The Integrated Navigation System Shall Ensure That The Different Types Of Information Are Distributed To The Relevant Parts Of The System, Applying A Consistent Common Reference System For All Types Of Information. Y. The Integrated Navigation System Shall Provide Information On Position, Speed, Heading, And Time. Z. The Integrated Navigation System Shall Be Able To Automatically, Continually And Graphically Indicate The Ship's Position, Speed And Heading And, Where Available, Depth In Relation To The Planned Route As Well As To Known And Detected Hazards. Aa. The Integrated Navigation System Shall, In Addition, Provide Means To Automatically Control Heading, Track Or Speed, And Monitor The Performance And Status Of These Controls. Bb. Alarms Shall Be Displayed So That The Alarm Reason And The Resulting Functional Restrictions Can Be Easily Understood. 3.3 Operating Environment The Bridge Simulator Shall Exhibit The Following Operating Environment: A. The Simulator Shall Be Able To Present Different Types Of Target Ships, Each Equipped With A Mathematical Model, Which Accounts For Motion, Drift And Steering Angles According To Forces Induced By Current, Wind Or Wave. B. The Targets Shall Be Equipped With Navigational And Signal-lights, Shapes, And Sound Signals, According To Rules Of The Road. The Signals Shall Be Individually Controlled By The Instructor, And The Sound Signals Shall Be Directional And Fade With Range. Each Ship Shall Have An Aspect Recognizable At A Distance Of 6 Nautical Miles In Clear Weather. A Ship Underway Shall Provide Relevant Bow- And Stern Wave. C. The Simulator Shall Be Equipped With Targets Enabling Search And Rescuing Persons From The Sea, Assisting A Ship In Distress And Responding To Emergencies Which Arise In Port. Such Targets Shall At Least Be: · Rocket Parachute Flares · Hand Flares · Buoyant Smoke Signals · Sart (search And Rescue Transponder) · Satellite Epirb (emergency Position Indicating Radio Beacon) · Lifeboat · Life Raft · Rescue Helicopter · Rescue Aircraft · People In Water. D. The Simulator Shall Be Able To Present At Least 20 Target Ships At The Same Time, Where The Instructor Shall Be Able To Programme Voyage Routes For Each Target Ship Individually. (see Stcw Section A-1/12.4.3) E. The Simulator Shall Provide A Realistic Visual Scenario By Day, Dusk Or By Night, Including Variable Meteorological Visibility, Changing In Time. It Shall Be Possible To Create A Range Of Visual Conditions, From Dense Fog To Clear Conditions. F. The Visual System And/or A Motion Platform Shall Replicate Movements Of Own Ship According To 6 Degrees Of Freedom. G. The Projection Of The View Shall Be Placed At Such A Distance And In Such A Manner From The Bridge Windows That Accurate Visual Bearings May Be Taken To Objects In The Scene. It Shall Be Possible To Use Binocular Systems For Observations. H. The Visual System Shall Present The Outside World By A View Around The Horizon (360°). The Horizontal Field Of View May Be Obtained By A View Of 270° And Where The Rest Of The Horizon May Be Panned (to Move The “camera”). (applicable Only To Full Mission Bridge Station With 270° Horizontal Display) I. The Visual System Shall Present The Outside World By A View Of At Least 120° Horizontal Field Of View. In Addition, At Least The Horizon From 120° Port To 120° Starboard Shall Be Able To Be Visualised By Any Method. (applicable Only To Mini Bridge Station With 120° Horizontal Display). J. The Visual System Shall Present A Vertical View From The Workstations For Navigation, Traffic Surveillance And Manoeuvring Enabling The Navigator To Detect And Monitor Objects Visually On The Sea Surface Up To The Horizon Within The Required Horizontal Field Of View When The Ship Is Pitching And Rolling. In Addition, By Any Method, It Shall Be Possible To Observe The Ship's Side And The Dock During Mooring Operations. K. The Visual System Shall Present All Navigational Marks According To Charts Used. L. The Visual System Shall Show Objects With Sufficient Realism (detailed Enough To Be Recognized As In Real Life). M. The Visual System Shall Show Mooring And Towing Lines With Sufficient Realism In Accordance With The Forces Effecting The Tension. N. The Visual System Shall Provide A Realistic Set Of Bow Wave, Sea Spray And Wakes In Accordance With Ships Power Output, Speed And Weather Conditions. O. The Visual System Shall Provide A Realistic Set Of Flue Gas Emission And Waving Flag Effect In Accordance With Ships Power Output, Speed And Weather Conditions. P. The Simulator Shall Be Capable Of Providing Environmental Sound According To Conditions Simulated. Q. The Navigated Waters Shall Include A Current Pattern, Changeable In Time, According To The Charts Used. Tidal Waters Shall Be Reflected. R. The Simulation Shall Include The Depth According To Charts Used, Reflecting Water Level According To Tidal Water Situation. S. The Simulator Shall Provide At Least Two Different Wave Spectra, Variable In Direction Height And Period. T. The Visual System Shall Provide A Realistic Set Of Wind Waves Including White Caps According To The Beaufort Wind Force Scale. The Simulator Shall Have The Following Additional Requirements For Training In Ice Navigation: U. The Visual System Shall Be Capable Of Showing Concentrations Of Solid And Broken Ice Of Different Thickness. V. The Visual System Shall Be Capable Of Showing The Result Of Icebreaking Including Opening, Twin Breaking And Compacting Channel. W. The Visual System Shall Be Capable Of Showing The Effects Of Searchlight. X. The Visual System Shall Be Capable Of Showing The Effects Of The Ice Accretion To The Own Ship Model. The Simulator Shall Have The Following Additional Requirements For Training In Integrated Bridge Systems Including Integrated Navigation Systems: Y. There Shall Be A Field Of View Around The Vessel Of 360° Obtained By An Observer Moving Within The Confines Of The Wheelhouse Or May Be Panned (to Move The Camera). 4. Hardware Requirements 1 Set 4.1 Full Mission Bridge Simulator (horizon Field View Of 270 Degrees) A. Steel Fabrication Of Main Bridge Consoles Consisting Of: I. Conning/maneuvering Console Ii. Radar Console Iii. Ecdis Console Iv. Bearing Console V. Navigation Aid Equipment Console Vi. Gmdss Console Vii. Steering Stand/console Viii. Chart Table Ix. Overhead Panel X. Gyro Repeater With Pelorus Stand Xi. Binoculars Xii. The Console Must Made Of Steel W/ Handrails B. Visual Specification (minimum Requirements) I. 9x 70” Visual Screens Led Backlit 1. Pc Visual Channel 2. Intel Core I5 Processor 3. 16 Gb Ram 4. 256 M.2 Ssd 5. Rtx 4070 Or Higher 6. Keyboard/mouse 7. Hdmi Cable 8. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator C. 1x Conning Console (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. 2x Monitor 24” 5. Keyboard/mouse 6. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator 7. Console Made Of Steel (tct 0.8 Mm To 2 Mm) 8. Instrument Adds On Conning Console. D. 2x Ecdis Console (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. Monitor 24” 5. Keyboard/mouse 6. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator 7. Console Made Of Steel (tct 0.8 Mm To 2 Mm) E. 2x Radar / Arpa Console (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. Monitor 24” 5. Keyboard/mouse 6. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator 7. Console Made Of Steel (tct 0.8 Mm To 2 Mm) F. Binocular And Instrument (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2. Ssd 4. Rtx 4070 Or Higher 5. Keyboard/mouse 6. 2x 24" Monitor 7. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator 8. Console Made Of Steel (tct 0.8 Mm To 2 Mm) G. Overhead Panel Display 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. At Least 1width And 0.4height 5. Keyboard/mouse 6. Ups 1kva A. Surge Protection B. W/ Automatic Voltage Regulator H. Radar/arpa I. Radar/arpa Keyboard (1 Set) Specifications: 1. Usb Interface 2. Console Mount Type I. Handset I. Handset Includes: 1. Handset 2. Cradle With A Ptt Switch 3. Usb Interface Board 4. Handset Box J. 1x Chart Table Console 1300mm X 1312mm (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. 2x Monitor 24” 5. Keyboard/mouse 6. Ups 1kva A. Surge Protection B. W/ Automatic Voltage Regulator Ii. 1x Parallel Ruler Iii. 1x One-hand Compass Divider Steel Iv. 10x Plotting Triangle With Handle V. 1x Deck Log Book Vi. 1x Night Order Book Vii. 1x Bell Book Viii. 1x Chronometer Ix. Admiralty Paper Charts Related To Installed Maps In Simulator K. Gyro Repeater With Pelorus Stand 1. Bearing Repeater Compass 2. Pelorus Stand 3. Power: 24vd 4. Signal: Rs422 Nmea L. Weather Instruments 1. 1x Ships Clock 2. 1x Aneroid Barometer 3. 1x Hygrometer. M. Speaker With Subwoofer I. Channel Sound System Specification: 1. Interface With Visual Pc 2. Realization Of 3d Sound Effect System 3. Atleast 450watts Speaker With Subwoofer 4. Port: Mini Jack 7 Sets 4.2 Mini Bridge Simulator (horizon Field View Of 120 Degrees) A. Consoles Made In Formica Laminated Board Fabrication Of Main Bridge Consoles Consisting Of: I. Conning Console Ii. Radar Console Iii. Ecdis Console Iv. Maneuvering Console V. Chart Table With Gooseneck Dimming Light B. Mini Bridge Desktop Station (bridge Image Generator Computer For Visual, Conning, Radar, Maneuvering And Overhead Display) I. 3x 45” 4k Display For Visual (minimum Requirements) Ii. 1x Computer (minimum Requirements) 1. 256 M.2 Ssd 2. Rtx 4070 Or Higher 3. 1 X Keyboard/mouse 4. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator Iii. 1 X Computer (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. Keyboard/mouse 5. 24” Monitor 6. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator Iv. 1 X Overhead Panel Display V. 1 X Speakers (minimum Requirements) 1. Interface With Visual Pc 2. Realization Of 3d Sound Effect System 3. Atleast 150 Watts Speaker With Subwoofer 4. Port: Mini Jack Vi. 1 X Goose Neck Microphone Vii. 1 X Set Desktop Instrument Console Including: 1. Steering System / Autopilot / Nfu 2. Steering Wheel Viii. Dual Telegraph 1. 1 X Console Tables 2. 1 X Handheld Uhf Equipment 3. 1 X Console Made In Formica Laminated Board (tct 3/4 Inches) Ix. Chart Table And Plotting Aids (minimum Requirements) 1. Intel Core I5 Processor 2. 8 Gb Ram 3. 256 M.2 Ssd 4. 1x Monitor 24” 5. Keyboard/mouse 6. Ups 1kva A. Surge Protection B. W/ Automatic Voltage Regulator X. 1x Parallel Ruler Xi. 1x One-hand Compass Divider Steel Xii. 1x Plotting Triangle With Handle Xiii. 1x Chart Table At Least 1000mm X 700mm Xiv. 1x Deck Log Book Xv. 1x Night Order Book Xvi. 1x Bell Book Xvii. 1x Chronometer 1 Set 4.3 Bridge Instructor Station A. Instructor Station I. 1x Computer (minimum Requirements) 1. 2x 24” Monitor 2. Intel Core I5 Processor 3. 16 Gb Ram 4. 256 M.2 Ssd 5. Rtx 4070 Or Higher 6. Keyboard/mouse 7. Ups 1.5kva 1. Surge Protection 2. W/ Automatic Voltage Regulator Ii. 1x Handset 1. Handset 2. Cradle With A Ptt Switch 3. Usb Interface Board 4. Handset Box Iii. 1x Speaker 1. Type: Desktop 2. Port: Mini Jack Iv. 1x Steel Cabinet W/ Lock 1. Metal Drawer Office Drawer 2. File Cabinet Storage With Wheel V. 1x Drone View Monitor W/ Smart Tv 55” Tv Led (environment View Of Instructor) Vi. 1x Smart Tv 55” Tv Led For Cctv Vii. 1x Printer 1. Laser Printer A4 2. A4 Print Speed Up To 48 Ppm 3. Auto 2-sided (duplex) Printing, 1-line Lcd 4. Wifi, Airprint, Mopria, Wifi Direct, Lan, Usb 2.0 5. Colored Printer Viii. Instructor Station Table Specification: Ix. 1x Table Size: At Least L 1700 X W 700 X H 750 Mm 1. Material: Formica Matt Laminate On Chipboard X. Intercom Telephone / Public Announcement System Xi. 9x Two-way Vhf Radiotelephone (walkie-talkie) With Charging Connection Xii. 1x Ergodynamic Chair Xiii. 1x Document Metal Cabinet With Glass Sliding Door 1. Size: 1850x 400mmx 900mm 2. Door Lock 1 Set 4.4 Bridge Simulator Scenario Development Station B. Scenario Development Station As An Instructor Station Capable Of Deploying Scenarios To Other Stations. I. 1x Computer (minimum Requirements) 1. 2x 24” Monitor 2. Intel Core I5 Processor 3. 16 Gb Ram 4. 256 M.2 Ssd 5. Rtx 4070 Or Higher 6. Keyboard/mouse 7. Ups 1.5kva 1. Surge Protection 2. W/ Automatic Voltage Regulator Ii. 1x Table Size: At Least L 1200 X W 800 X H 750 Mm 1. Material: Formica Matt Laminate On Chipboard Iii. 1x Ergodynamic Chair 5. Software Requirements 5.1 Full Mission Bridge Simulator The Full Mission Bridge Simulator Shall Have The Following Software And Controls For The Following Workstations: A. Workstation For Navigating, Maneuvering And Monitoring Consisting: · One (1) Ecdis Master Software · One (1) Ecdis Slave Software · One (1) Conning Display Software · One (1) Radar/arpa 3cm · One (1) Radar/arpa 10cm · Nine (9) Realistic Visualization Software With 270° Field Of View · Keyboard And Trackball Controls For Ecdis, Radar Apra And Conning Display · Two (2) Vhf Dsc Radio W Ch16 · One (1) Overhead Panel Display · One (1) Main Engine Telegraph Including Emergency Stop Control With Printer · One (1) Bow And Stern Thruster Control · One (1) Gps Software · One (1) Bridge Navigational Watch Alarm System (bnwas) · One (1) Echo Sounder · One (1) Speed Log · One (1) Vr Binoculars · One (1) Observer Position/ Visual Control · One (1) Anchor Gear And Mooring Operations Control · One (1) Towing Control · One (1) Tugs Control · One (1) Autopilot Control System · Nfu/ Fu Controls · One (1) Tiller Controls · One (1) Information On Ship Automatic Identification System (ais) · One (1) Intercom Telephone Capable For Public Address System · One (1) Conference Microphone · One (1) Control For Searchlight · One (1) Gyro Repeater/pelorus Stand That Can Display Magnetic And Gyro Compass · One (1) Bearing Finder · One (1) Alarm System Panel For General Alarm, Fire Alarm, And Other Alarms · Navigation Lights Control · Flags, Daytime Shapes And Sound Signals Control · One (1) Two-way Vhf Radiotelephone (walkie-talkie) With Charging Connection · Sound Reception System · Acknowledgment Of The Watch Alarm · Information Indicators For: - Propeller Revolutions (actual And Desired) - Main Engine Rpm - Main Engine Revolution In The Case Of Reduction Geared Engine - Propeller Pitch In The Case Of Controllable Pitch Propeller - Torque - Starting Air - Lateral Thrust - Log Speed And Speed Over The Ground - Bow And Stern Speed - Athwartship Speed - Rudder Angle - Rate-of-turn - Gyro Compass Heading - Magnetic Compass Heading - Heading Reminder (pre-set Heading) - Water Depth Including Depth Warning Adjustment - Vessel Time - Wind Direction And Velocity - Air And Water Temperature - Clinometer - Alarms - Pilot Card - Maneuvering Characteristics - Scoring Exercise/ Assessment · Signal Transmitter For: - Whistle - Automatic Device For Fog Signals - Alarms, (general Alarm, Emergency Alarm, Etc.) - Morse Signaling Light B. Workstation For Manual Steering (wheelhouse) Consisting Of: · One (1) Steering Wheel · Rudder Pump Selector Switch · Steering Mode Selector Switch · Steering Position Selector Switch · Indications For: - Gyro Compass Heading - Magnetic Compass Heading - Pre-set Heading - Rudder Angle - Rate Of Turn - Steering Mode (fu/nfu) – Track Control/auto Navigation C. Workstation For Route Planning And Documentation Consisting Of: · Computer For Route Planning Devices (ecdis) · Chart Table With Drawers For Paper Charts, Flags And Pennants · Paper Charts · Plotting Aids · Chronometer · Weather Facsimile D. Workstation For Communications Consisting Of: · One (1) Handset For Radiotelephone · Gmdss Equipment As Required For The Applicable Sea Area · Vhf-dsc, Radiotelephone · Mf-dsc, Radiotelephone · Mf/hf-dsc, Nbdp, Radiotelephone · Mf/hf Mf/hf Radio Telex · Inmarsat-ses, Egc Rx With Lrit And Ssas · Navtex/egc/hf Direct Printing Telegraph · Fbb/iridium · Cospas-sarsat Epirb · Sart · Ais Sart · Main Station For Two-way Vhf Radiotelephone · Aircraft Vhf Radiotelephone · Gmdss Alarm Panel · Radio Direction Finder Rt-500-m (marine) · Power Switchboard · Battery Charger · Virtual Printer 5.2 Mini Bridge Simulator The Mini Bridge Simulators Shall Have Each Of The Following Software And Controls For The Following Workstations: E. Workstation For Navigating, Maneuvering And Monitoring Consisting: · One (1) Ecdis Master Software · One (1) Conning Display Software · One (1) Radar/arpa Interchangeable To 3cm & 10cm · Three (3) Realistic Visualization Software With 120° Field Of View · Keyboard And Trackball Controls For Ecdis, Radar Apra And Conning Display · One (1) Vhf Dsc Radio W Ch16 · One (1) Overhead Panel Display · One (1) Main Engine Telegraph Including Emergency Stop Control With Printer · One (1) Bow And Stern Thruster Control · One (1) Gps Software · One (1) Bridge Navigational Watch Alarm System (bnwas) · One (1) Echo Sounder · One (1) Speed Log · One (1) Vr Binoculars · One (1) Observer Position/ Visual Control · One (1) Anchor Gear And Mooring Operations Control · One (1) Towing Control · One (1) Tugs Control · One (1) Autopilot Control System · Nfu/ Fu Controls · One (1) Tiller Controls · One (1) Information On Ship Automatic Identification System (ais) · One (1) Intercom Telephone Capable For Public Address System · One (1) Conference Microphone · One (1) Control For Searchlight · One (1) Vdr Remote Alarm Panel · One (1) Bearing Finder · One (1) Alarm System Panel For General Alarm, Fire Alarm, And Other Alarms · Navigation Lights Control · Flags, Daytime Shapes And Sound Signals Control · One (1) Two-way Vhf Radiotelephone (walkie-talkie) With Charging Connection · Sound Reception System · Acknowledgment Of The Watch Alarm · Information Indicators For: - Propeller Revolutions (actual And Desired) - Main Engine Rpm - Main Engine Revolution In The Case Of Reduction Geared Engine - Propeller Pitch In The Case Of Controllable Pitch Propeller - Torque - Starting Air - Lateral Thrust - Log Speed And Speed Over The Ground - Bow And Stern Speed - Athwartship Speed - Rudder Angle - Rate-of-turn - Gyro Compass Heading - Magnetic Compass Heading - Heading Reminder (pre-set Heading) - Water Depth Including Depth Warning Adjustment - Vessel Time - Wind Direction And Velocity - Air And Water Temperature - Clinometer - Alarms - Pilot Card - Maneuvering Characteristics - Scoring Exercise/ Assessment · Signal Transmitter For: - Whistle - Automatic Device For Fog Signals - Alarms, (general Alarm, Emergency Alarm, Etc.) - Morse Signaling Light F. Workstation For Manual Steering (wheelhouse) Consisting Of: · One (1) Steering Wheel · Rudder Pump Selector Switch · Steering Mode Selector Switch · Steering Position Selector Switch · Indications For: - Gyro Compass Heading - Magnetic Compass Heading - Pre-set Heading - Rudder Angle - Rate Of Turn - Steering Mode (fu/nfu) G. Workstation For Route Planning And Documentation Consisting Of: · Computer For Route Planning Devices (ecdis) · Chart Table With Drawers For Paper Charts, Flags And Pennants · Paper Charts · Plotting Aids · Chronometer H. Workstation For Communications Consisting Of: · One (1) Handset For Radiotelephone · Gmdss Equipment As Required For The Applicable Sea Area · Vhf-dsc, Radiotelephone · Mf-dsc, Radiotelephone · Mf/hf-dsc, Nbdp, Radiotelephone · Mf/hf Mf/hf Radio Telex · Inmarsat-ses, Egc Rx With Lrit And Ssas · Navtex/egc/hf Direct Printing Telegraph · Fbb/iridium · Cospas-sarsat Epirb · Sart · Ais Sart · Main Station For Two-way Vhf Radiotelephone · Aircraft Vhf Radiotelephone · Gmdss Alarm Panel · Radio Direction Finder Rt-500-m (marine) · Power Switchboard · Battery Charger · Virtual Printer 5.3 Instructor Station 1. The Instructor Workstation Is An Integral Part Of The Simulator And Is Designed To Control The Training Complex, Design (develop) Exercises, Perform Exercises In Real Time, Control Exercise Performance By Trainees, Change Environmental Conditions And Sailing Circumstances, As Well As Enter Own Ship Failure Variables, Document, And Archive The Position And Activity Of The Ship Involved In The Exercise. The Instructor Station Software Should Contain Navigation Areas As Well As Sub-tasks For Each Area, Allowing The Control Of All Active Vessels And Target Ships. 2. Navigation Instructor Software Includes: · Navigation Instructor · Evaluation And Assessment · Tug And Mooring · Radar/arpa · Electronic Navigational Chart: · Bird Eye Of Instructor · Debriefing System 3. Simulator Session(s) Control: • Exercise(s) Start, Pause, Re-start After The Pause, Stop On Bridge(s); • Setting The Initial Position For Own Ships; • Entering Faults Of Navigation Systems, Steering Gear, Propulsion Plant, Fire And General Alarm; • Ability To Set Faults Of Navigational Equipment; • Pulling Apart Ships That Have Collided Or Run Aground; • Control Of Target Vessels, Hoisting Flags Of The International Code Of Signals, Turning Their Sound Signals On And Turning Their Lights On/off; 4. The Software Modules Should Provide A Possibility To Flexibly Configure The Required Bridge Configuration. General: · An Integrated Application For Exercise Editing, Conducting And Debriefing; · Highly Accurate Data Representation Based On Vector Diagrams (ability To Automatically Load All Diagrams Related To The Selected Game Area); · Tools For Creating Exercises And Automatic Competency Assessment Scenarios; · Displaying Of The Actual Ship Contours; · Display Of Object Tracks: Contour Or Point With Selectable Resolution, Track History And Time Stamps; · Using The Mouse Wheel For Chart Scaling; · Control Of Simulator Session(s); · Continuous Automatic Recording Of Data During Exercise (main, Audio And Video Log Files); · Real Time, Slow Time, And Fast Time Modes; · Ability To Display And Print A New Pilot Card And A Table Of Maneuvering Characteristics Of The Ship; · Setting Parameters And Faults Of Navigation Equipment: Radar, Gps, Loran C, Log, Gyro, Echo Sounder, Uais; · Setting Weather And Bathymetric Conditions: Global And Local Zones, Import Of Tide And Current Databases (ecdis); · Working With Measuring Tools: - Ability To Set Erbl; - Ability To Attach, Move Or Delete Erbl During An Exercise; 9. Ability To Attach Sart To The Life Raft; 5. Ability To Move Own Ship During Exercise Without Grounding Or Collision; 6. Ability To Apply Virtual Tug Force To 8 Points Of The Vessel’s Hull In Any Direction; 7. Display Of Actual Ship's Contours; 8. Continuous Display Of Parameters Of Vessel Movement And Environment Conditions: Course And Speed Of The Vessel, Course Over The Ground, Transversal Component Of Speed On The Bow And On The Stern, Gyro Heading, Rate Of Turn, Speed And Direction Of The Current And Wind, Height And Direction Of A Wave, Depth; 9. Independent Instructor Control For Wind And Swell Components Of The Wave; 10. Ability To Set Sea State Spectrum: · Pierson-moskowitz; · Phillips; · Ittc (international Towing Tank Conference); · Jonswap (joint North Sea Wave Project); · User. 11. Ability To Exclude Hydrodynamic Interaction With Mooring Walls In The Required Area; 12. Ability To Create A Template Containing A Set Of Objects (ships), Save And Use This Template In Other Exercises; 13. Ability To Save Environment Settings As A Template And Load A Previously Saved Template In Any Exercise And Area; 14. Mooring Operations: · Ability To Set The Rope Material; · Ability To Set The Initial State Of The Mooring Winch (render, Slack Away, Stop); · Ability To Set Mooring Winch Parameters (speed, Pulling Force, Holding Force); · Ability To Operate The Mooring Winch At The Instructor Workplace. 15. Anchor Operations: · Ability To Set User Ground Type With Required Anchor Holding Force Coefficients; · Display Of Anchor Position On The Instructor's Chart On The Ground. 16. Control Of Navigational Lights And Shapes: · Ability To Control The Navigational Lights; · Ability To Switch On/off Deck Lights On Target Ships. 17. Loading/discharging Of Own Ship During Exercises; 18. Weather Conditions Manager: · Ability To Set Predefined Weather Conditions By Beaufort Number (wind, Wave, Whitecaps And Foam, 3d Clouds, Cloud Layer, Visibility) On The Fly; · Ability To Set Customized Weather Conditions; · Visual Effects: Rain And Snow (low, Medium, High), Lightning, Reflection, Translucency, Sea With White Caps, Foam, Splashes, Bow-wave; · Separate Settings For Wind Wave And Swell; · Manual Control Of Wind Direction And Strength; · Adjustment Of Atmospheric Parameters – Temperature, Humidity, Pressure; · Ability To Use Thunderstorm, Precipitation; · Automatic Calculation Of The Position Of The Sun, Moon, Major Stars (up To 100) And Constellations, The Angle And Phase Of The Moon; · Ability To Set Wave Spectrum Type: Pierson-moskowitz; Jonswap (joint North Sea Wave Project); Phillips; User-defined; · Ability To Use Thunderstorm, Precipitation. 19. Rcc, Ship And Coast Stating Assignment; 20. Log Module With Possibility To Print Out And Create Archives; 21. Window For Listening/monitoring Of The Radiotelephone Traffic Including Possibilities To Interfere With Radiotelephone Traffic; 22. Ability To Introduce Background Noise From A List And Instrument Faults To The Trainee Stations. 23. Ability To Change Names, Call Signs, Mmsi, Telex Numbers And Inmarsat Mobile Numbers Of All Emulated Ship Stations And Coast Station According To The Needs Of Different Exercises; 24. Electronic Chart With Vessel Position Indication And The Ability To Change Position, Course And Speed; 25. Ability To Display And Instantly Change Trainee Station Positions On The Electronic Map For Search And Rescue (sar) Exercises; 26. Full Monitoring Of Any Trainee Workstation – The Ability To Monitor The Status Of Each Gmdss Unit And Listen To The Radio Traffic Of Each Trainee Station; 27. Connection To An External Printer; 28. Connection To An Active Speaker For Simultaneous Viewing Of Channels; 29. Providing Functions Of A Coast Telex Or Telephone Subscriber, Coast Radio Station And Rcc Operator From The Log Window; 30. Status Window For All Instruments At Any Workstation; 31. Ability To Log Communication And Trainee Actions For Playback And Later Review; 32. Database Of Coastal Stations, Navtex And Msi Stations And Inmarsat Shore-based Stations Plotted On The Chart; 33. Information About The Gmdss Sea Areas On The Chart; 34. Approximate Estimation Of Radio Wave Propagation In The Selected Frequency Range; 35. Evaluation And Assessment Module; 36. Navtex Functionality: · Ability To Send Navtex Messages On Behalf Of A Navtex Station; · Ability To Edit And Use The Navtex Station Used-defined List; · Ability To Save And Use Navtex Message Templates. 37. “intercom” Panel. To Monitor Intercom Communication, Execute Voice Messages From The Instructor's Side. 38. Vhf Radio Station Module. To Monitor Vhf Communication, Send Voice Messages From The Instructor’s Side, Play Pre-recorded *.wav Files. 39. Coastal Radio Station Module. Screen Layout: 40. Use Of The Mouse Wheel For Chart Centering And Scaling; 41. On-screen Display Of Mooring Walls And Piers; 42. On-screen Display Of Actual Contours Of Any Ship; 43. On-screen Display Of The Object’s Route Line And Its Actual Track; 44. On-screen Display Of The True And Relative Speed Vectors; 45. Selectable Display Mode: True Motion, Relative Motion, Course Up Or North Up; 46. Display Of Prompt And Other Information In The Status Bar: · Bearing And Distance From The Current Cursor On-chart Position To The Reference Point; · Coordinates Of The Current Cursor On-chart Position; · Depth In The Current Cursor Position; · Current Exercise Time (absolute And Relative). 47. Displaying Of Object Tracks: Contour Or Point With Selectable Resolution, Track History And Time Stamp; 48. Displaying Of Walls And Piers; 49. Use Of A Mouse Wheel For Chart Centering And Scaling; 50. User Configurable Workplace; 51. Different Panels For The Control And Monitoring Of The Exercise Fulfillment: · Reports Panel – To Form And Print Exercise Fulfillment Reports; · Ship Info Panel – To Display Courses, Longitudinal And Transverse Speeds, Rates Of Turn For All The Ships Involved In The Exercise. · Evaluation And Assessment Module Panel; · Target Panel – To Control Vessel Target And Flight And Sar Objects; · Objects Panel – To Promptly Select An Object On The Chart From The List Of All The Objects Available In The Exercise; · Flags Panel – To Hoist/lower Ics Flag Signals On Any Of The Ships, Including Ability To Set And Keep Flag Templates · Events Panel – For The Automatic Recording Of Any Important Events Related To The Incorrect Trainee Actions; · Flash Light Panel – To Send Light Signals From Target Vessels, Including Automated Translation Into Morse Code; · Magnetic Deviation Panel – To Configure The Magnetic Deviation Panel For The Vessels, Participating In The Exercise, Save The Panel And Apply Desired Template To Any Own Vessel, Print The Magnetic Deviation Table; · Procedural Alarms Panel – For Defining User Set Of Alarm For Dedicated Vessels. 52. Setting Navigational Equipment Parameters And Faults: Radar, Gps, Loran C, Log, Gyro, Echo Sounder, Uais; 53. Setting The Exercise Weather And Bathymetric Conditions: Global And Local Zones, Import Of Tide And Current Databases; 54. Observing Own Ships And Targets On The Chart: Ship Info Panel, Cpatcpa Panel, Events Panel; 55. Control Of Own Ships And Targets On The Chart: Direct Control Of Steering And Propulsion Systems, Autopilot, Mooring Lines, Anchors; 56. Setting Faults Of Navigational Equipment, Steering And Propulsion System, Fire And General Alarms; 57. Continuous Data Logging During Exercises; 58. Playback Of Recorded Exercises In Real And Fast-time Modes; 59. Performing Preliminary Exercises On The Map To Check Their Suitability For Training On The Simulator; 60. Distress Signals (flare, Smoke Signals, Dye Markers); 61. Adding New Target Ships; 62. Changing Weather Conditions; 63. Moving Buoys, Turning Off Lights On Them And Hiding Them On Both The Visualization System And Radar; 64. Control Of Automatic Tugboats On Commands From The Bridge Or From The Instructor; 65. Generating And Printing Exercise Reports 5.4 Simulator Scenario Development Station 1. The Simulator Scenario Development Station Shall Be Integrated With All Engine Stations And Instructor Stations, And Can Act As An Instructor Station Capable Of Deploying Scenarios To Other Stations (bridge And Engine) 2. The Simulator Scenario Development Station Shall Have The Same Software And Control Capabilities As The Instructor Station. (see Section A 5.5.3) B. Full Mission Engine Room Simulator (fmers) And Mini Er Stations’ Features And Applications, Major Components And Engine Room Simulator Performance Standards 1. Major Components The Full Mission Engine Simulators That Can Be Integrated With Bridge Simulators Shall Consist Of The Following Major Components: A. One (1) Full Mission Engine Room Station (class A Configuration) B. Ten (10) Mini Engine Room Stations (class B Configuration) C. One (1) Server Station D. One (1) Instructor Station E. One (1) Simulator Scenario Development Station F. One (1) Briefing/ Debriefing Station 2. Features And Applications 2.1 The Man Electronic Engine Model Simulates A Suez Max Crude Oil Carrier With A Man Slow Speed Turbo Charged Diesel Engine As Propulsion Unit Modeled With Fixed Propeller. The Main Engine Models Respond Dynamically To Variations In Operation And Conditions Of The Ship Model, And The Ship Models Have Mutual Responses To The Main Engine Models. The Model Is Based On Real Engine Data That Makes The Dynamic Behavior Of The Simulator Close To Real Engine Response. In Addition To The Man Engine, The Vessel Has An Electrical Power Plant Including Three 1125 Kva Diesel Generators And One 250 Kva Emergency Generator. The Steam Plant Includes Two D-type Steam Boilers, Based On Alfa Laval And One Composite Boiler (aalborg), 3 Cargo Turbines, Condensing And Feed Water Systems. Control Room Operator Station, Bridge And Steering Panels Are Included. The System Shall Also Be Connected To The High Voltage Engine Simulator. 2.2 The Simulator Models Complies With The Requirements In The Stcw Convention, Regulation 1/12 And Fulfill The Standards Of An Internationally Recognized Classification Society For Maritime Simulator Systems. 2.3 The Engine Model Main Specifications High Fidelity Engine Room Systems Include: - Sea & Lt/ht Fresh Water Systems, Incl. Fw Generator - Electrical Power Plant, Incl. Diesel Generators And Power Management - Start & Service Air Compressors, Incl. Compressor Intermediate Coolers And Emergency Compressor - Integrated Automation System, Incl. Vessel Performance Monitor - Steam Plant Incl. D-type Oil Fired Boilers And Combined Exhaust/oil Fired Boiler - Diesel/heavy Fuel/oil Systems, Incl. Hfo, Lshfo And Mdo Tanks, Separators, Viscometers - Lubricating Oil Systems, Incl. Separator - Stern Tube Systems - Steering Gear - Main Engine Control System (man) - Main Engine Remote Control System (ac 600) - Main Engine Maneuvering System - Main Engine Hydraulic Oil System - Main Engine Hydraulic Cylinder Units System - Cylinder Indication Diagrams - Air Ventilation System - Bilge Wells & Bilge Separator - Sewage Treatment Plant - Incinerator Plant - Inert Gas System - Ballast System - Refrigeration System - Ship Loading System - Fire Detection System - Fire Fighting System - Remote Co2 Release, Emergency Stops And Quick Release Valves - Emission Control System (water Scrubbing And Me Low Nox Mode) 2.4 The Engine Simulator Product Shall Be Able To Address The Following Stcw Competencies And Shall Be Reflected In The Certificate: · Table A-iii/1.1 – Maintain Safe Engineering Watch · Table A-iii/1.3 – Used Of Internal Communication Systems · Table A-iii/1.4 – Operate Main And Auxiliary Machinery And Associated Controls · Table A-iii/1.5 – Operate Fuel, Lubrication, Ballast And Other Pumping Systems And Associated Control Systems · Table A-iii/1.6 – Operate Electrical, Electronic And Control Systems · Table A-iii/1.7 – Maintenance And Repair Of Electrical And Electronic Equipment · Table A-iii/1.11 – Maintain Seaworthiness Of The Ship 2.5 Interface To Engine Room High Voltage System - The Engine Room Model Will Be Interfaced To A Corresponding High Voltage Simulator And Gas Turbine Installed In The Academy. 3. Engine Room Simulator Performance Standards 3.1 Physical Realism The Engine Simulator Stations Shall Have The Following Physical Realism: A. Equipment And Consoles Shall Be Installed, Mounted, And Arranged In A Ship-like Manner B. The Control Room Consoles Shall Include Control And Monitoring Of The Main Engine, Auxiliary Engines And Electrical Power Generation, Steam Boiler, Pump, Compressors And All Other Alarms. C. The Remote Monitoring And Control Systems Shall Be In Compliance With The Functional Requirements Of The Classification Societies For Periodically Unattended Machinery Spaces. D. The Main Engine Remote Control Console Shall Include Command Functions And Status Indication Normally Found On Board Ships. E. The Electric Power Generation Shall Be Under Automatic Or Manual Control. Such System Should Be Able To Constantly Monitor Demand And Supply. When Deviation From Pre-set Limits Arises, The System Should Be Able To Act In Order To Normalize The Situation. The System Shall Also Perform Continuous Control Of The Frequency And Load Sharing. F. The Electric Power Supply System Shall Be Operated Either From The Switchboard Or The Power Management System. - Remote Start/stop Of Auxiliary Diesel Generators - Operation For Shaft Generator - Connect/ Disconnect Of All Generators - Automatic And Priority Selection - Non-essential Systems Trip - Constant Frequency Mode - Different Control Modes Of Load Sharing G. The Main Switchboard Shall Be A Full Scale Model Of A Typical Switchboard, And Comprise The Necessary Controls And Indicators Usually Available Of Real Generators. H. The Remote Control And Automation System Must Include Control Of The Following Equipment: - Me Lubricating Oil Pumps - Me Fresh Water Cooling Pumps - Me Sea Water Cooling Pumps - Me Auxiliary Blowers - Fuel Oil System And Pumps - Air Compressors - Steering Gear Pumps - Fire Pump Each Of The Above Individual Units Shall Allow Manual Start And Stop From The Control Room Consoles. It Shall Also Be Possible To Use Automatic Start And Stop Where Applicable. I. The Alarm Monitoring System Shall Consist Of A Typical Shipboard Alarm System. J. An Alarm Shall Be Announced By Sound And By Flashing Light In The Control Room. K. A Printer Or A Computer In The Engine Room Control Shall Be Used As An Alarm Log And Event Log. L. “dead Man Alarm System” The Simulator Shall Have The Following Additional Requirements For Low Speed Engine: M. The Simulated Engine Room Shall As A Minimum Reflect Typical Machinery Found On Merchant Ships. The Following Main Components Shall Be Simulated And All Necessary Sub-systems Included For A Low Speed Engine: - Main Engine Including Turbocharger System - 2 Auxiliary Diesel Generators - Lubrication Oil Separator - Steering Gear System - Fire Pump - Shaft Generator - Cooling Water System Including Freshwater Generation System - Turbo Generator - Fuel Oil Bunkering System - Fuel Oil Settling And Service Systems - 2 Heavy Fuel Oil Separators - 1 Diesel Oil Separator - Steam Generation Plant Including Exhaust And Oil-fired Boilers - Diesel Oil And Heavy Fuel Oil Supply To Main And Auxiliary Engines - Main Engine Operation From Engine Room, Engine Control Room And Bridge - Turbocharger System - Air Ventilation System For Engine And Control Room - Bilge Water System Including Oily Water Treatment Systems - Stern Tube System - Deck Machinery Applicable To The Ship Model - Ballast System - Sewage Treatment System The Simulator Shall Have The Following Additional Requirements For Medium And High Speed Engine: N. The Simulated Engine Room Shall Consist Of Typical Machinery Found On Merchant Ships. The Following Main Components Shall Be Simulated And All Necessary Sub-systems Included For A Medium And High Speed Engine: - One Or More Main Engines - Main Sw System - 2 Auxiliary Engines - Fuel Oil Tanks - Fuel Oil Separator - Lubrication Oil Separator - Main Engine(s), Including: • Fresh Water System • Lubrication System • Turbocharger System • Me Sw System - Reduction Gear System - Controllable Propeller Pitch Were Applicable - Steam Generation System As Applicable - Freshwater Generator - Bilge Wells And Bilge Separation System - 2 Air Compressors - Steering Gear System - Fire Pump - Electrical Power Plant - Deck Machinery Applicable To The Ship Model - Ballast System - Sewage Treatment System The Simulator Shall At Least Have The Following Additional Requirements For Machinery Spaces: O. The Simulated Machinery Spaces Shall At Least Include One Dedicated Room For This Purpose. P. At Least The Following Main Components Of The Machinery Spaces Shall Be Graphically Presented Or Represented By Mock-ups Or In Realistic Visualization (to Illustrate Physical Presence) In The Simulated Machinery Spaces: - Main Engine - Auxiliary Diesel Generators - Steam Boiler - Fire Pump Q. The Facilities For Local Operation In The Simulated Machinery Spaces Shall Consist Of Local Operating Stations For Each System. Each Station Shall Be Furnished With Start/stop (open/closed) Buttons And Status Lights, Various Numbers Of Pressure -, Temperature Indicators, Etc. The Local Operating Stations Shall At Least Give Means To Operate The Following: - Main Engine (me) - Me Lubricating Oil Systems Including Separator - Me Fresh Water Cooling System - Me Sea Water Cooling System - Me Auxiliary Blowers - 2 Auxiliary Diesel Generators - Steam Boiler - Fuel Oil System (diesel And Heavy Fuel Oil) Including Separator - 2 Air Compressors - Steering Gear System - Bilge Water System - Fire Pump R. All Valves Typically Associated With The Operation Of Above Machinery May Be Operated At The Computer Screen In A 3d Visual Form Or Mouse Operated By The Candidate. S. Internal Communication System. 3.2 Behavioral Realism The Engine Simulator Stations Shall Have The Following Behavioral Realism: A. The Simulator Models Shall Be Able To Replicate The Dynamic Behaviour Of The Machinery Systems And All Its Visual Parameters As Well As The Interactions Between The Sub-systems. B. The Simulator Models Shall Simulate The Engine Room Components With Their Procedures, As Well As Modelled Controller Systems (sensors, Controllers, Actuators, And Valves) Connected To The Processes. C. When Simulating Real Equipment The Behaviour Of Such Simulated Equipment Should Behave As Identical Aw Possible As The Original. Critical Parameters Of The Behaviour Shall Be Documented D. The Simulator Model Shall Make Applicable Controllers Available And Adjustable With Regards To Pid (proportional-integral-derivative Controller) Parameters. E. The Simulator Model Shall Provide Facilities To Allow The Injection And Resetting Of Malfunctions At Appropriate Times During Operation As Necessary. F. It Shall Be Possible To Simulate Change In Seawater Temperature And Demonstrate How This Affects The Complete Simulation Model. G. It Shall Be Possible To Simulate A Change In Air Temperature And Demonstrate How This Affects The Complete Simulation Model. H. The Simulator Shall Have All Heat Exchangers Available And Adjustable With Regards To Their Parameters (heat-transfer Factor, Heat Dissipation Are Etc.) I. The Simulator Shall Make All Pumps Available And Adjustable With Regards To Their Parameters (pump Capacity, Wear, Etc.) J. It Shall Be Possible To Demonstrate Systematically The Tests That Are Made On The Ums (unmanned Machinery Space) Alarm System. K. It Shall Be Possible To Simulate Auto Slow-down And Emergency Shut Down L. It Shall Be Possible To Simulate Safe Methods To Test Inert Gas Generator (ig) Alarms And Control. M. It Shall Be Possible To Simulate Testing Of The 24v D.c. Power Supply To The Navigation, Communication And Engine Room Control Console In Event Of Power Failure. N. It Shall Be Possible To Simulate Safe Method Of Testing The Insulation For Rotor And Stator. O. It Shall Be Possible To Simulate Of Reading A Power Factor Meter With Reference To Four Segments P. It Shall Be Possible To Simulate Testing Of The Devices And Relays Provided For Generator Protection Q. It Shall Be Possible To Simulate Tests Related To Avr (automatic Voltage Regulator) R. It Shall Be Possible To Simulate Methods Of Cooling And Checking Of Air Gap S. It Shall Be Possible To Simulate The Precautionary Measures When Megger Testing The Rotor Of A Brushless Generator T. It Shall Be Possible To Simulate Routine Tests On An Emergency Generator U. It Shall Be Possible To Simulate How A Generator Circuit Breaker Ocr (over Current Relay) Is Set And Tested. V. It Shall Be Possible To Simulate The Process Of Connecting A Shaft Generator On Load And Specific Conditions For Taking Off Load. W. It Shall Be Possible To Simulate The Procedure For Megger Testing A High Voltage System X. It Shall Be Possible To Simulate The Maintenance And Checks Carried Out On An Acb (air Circuit Breaker) Y. It Shall Be Possible To Simulate Recovery From “dead Ship” Condition. Z. It Shall Be Possible To Simulate Methods Test The “preferential Tripping Sequence” Aa. It Shall Be Possible To Simulate Methods To Tests Auto “cut In” Of Stand Fault Bb. It Shall Be Possible To Simulate Methods Of Diagnosing Single Phasing Fault. Cc. It Shall Be Possible To Simulate Operation And Maintenance Of Variable Speed Motor Starters. Dd. It Shall Be Possible To Simulate Operational Test Methods Of Oily Water Separator Monitors Ee. It Shall Be Possible To Simulate Test Methods For Level Alarms And Function Tests Of Bilge Pumping Arrangement Ff. It Shall Be Possible To Simulate The Functional Tests Of Odmcs (oil Discharge Monitoring And Control System) And Odme (oil Discharge Monitoring Equipment) System Gg. It Shall Be Possible To Simulate The Function Test Of Ows (oily Water Separator) And Ppm (parts Per Million) Unit. 3.3 Operating Environment The Engine Simulator Stations Shall Have The Following Operating Environment: A. It Shall Be To Adjust The Noise Level In The Simulated Machinery Spaces Infinite From No Added Noise Up To Minimum 100 Db(a). The Noise Shall Have A Frequency Distribution Typical For Machinery Spaces. Headset Is Provided For Each Workstation. B. It Shall Be Possible To Simulate The Sea Water Temperature At Least Infinite Between +1ºc And +30 ºc C. An Alarm Can Be Heard Through Headset Of A Candidate And By Flashing Light In The Machinery Spaces 4. Hardware Requirements 1 Set 4.1 Full Mission Engine Room Simulator A. Engine Control Room Consoles I. Ecr Pump Compressor And Power Management Console 1. 1 X Console 2. 1 X Computer 3. 2 X 24 Touch Monitors Ii. Ecr2 Alarm, Monitoring And Remote-control Console: 1. 1 X Console 2. 1 X Computer 3. 1 X Keyboard 4. 1 X 24” Touch Monitor 5. 1 X Industrial Tracker Ball Iii. Ecr3 Main Engine Remote Control And Indication Console 1. 2 X Console 2. 1 X Computer 3. 3 X 24” Touch Monitors 4. 1 X Speed Set Lever For Main Engine Remote Control And 5. Indication Console 6. Dead Man Alarm (dma) 7. Engineers Reset 8. Included Power Relay To Which Illumination In Engine Control Room And Engine Room Can Be Connected, Causing Lights In The Rooms To Go Out During A Blackout To Increase Realism. Iv. Simulated Cctv Touch Monitor 1. 1 X Computer 2. 1 X 24 Monitor V. Internal Telephone At The Following Locations 1. Instructors Station 2. Engine Control Room 3. Engine Room 4. Emergency Generator Room Vi. Main Switchboard 1. 14 X Touch Screen Monitors 2. 7 X Computers 3. 1 Set Of Speakers 4. Installed In A Switchboard Manner Vii. Engine Room Equipment 1. 4 Dome Type Virtual Walkthrough 2. 4 X High Resolution Short Throw Projector 3. 4 X Computer With Graphics Card 4. 4 X Controller Viii. Local Operating Station Console 1. 1 X Console 2. 1 X Computer 3. 1 X Keyboard 4. 1 X 24” Touch Monitor 5. 1 X Industrial Tracker Ball Ix. Engine Room Sound 1. 1 X Sub Woofer 2. 4 X Satellite Speaker X. Alarm Horn And Lamp 1. 1 X Column With Lights And Sirens Xi. Emergency Generator Room 1. 1 X Dome Type Virtual Walkthrough 2. 1 X High Resolution Short Throw Projector 3. 1 X Computer With Graphics Card 4. 1 X Controller 5. With Sound System B. All Computers Must Be The Latest Generation This Includes Processors, Memory, Graphics Card And Storage. I. Monitors: Full Hd Resolution Ii. Storage: Solid-state Drive (ssd) Iii. Processor Generation: Must Be From The Latest Generation Of Processors Iv. Graphics: Integrated Graphics Dedicated Gpu If Needed. C. Touchscreens For Durability, Responsiveness, And Multi-touch Support. D. Each Computer Must Be Paired With A Ups Unit Rated For At Least 1.5 Kva And Automatic Voltage Regulation To Handle Voltage Fluctuations. E. The Engine Control Console Must Be Made From Steel W/ Handrails 10 Sets 4.2 Mini Engine Room Simulator A. 1x Computer Specification (minimum Requirement) 1. Intel Core I5 Processor 2. 16 Gb Ram 3. 256 M.2. Ssd 4. Video Card 5. Keyboard/mouse 6. 2x At Least 24" Monitor (touchscreen) 7. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator B. 1x Table Size: At Least L 1200 X W 800 X H 750 Mm C. 1x Chairs 1 Set 4.3 Engine Instructor Station A. Instructor Station I. 1x Computer (minimum Requirements) 1. 3x 24” Monitor 2. Intel Core I5 Processor 3. 16 Gb Ram 4. 256 M.2 Ssd 5. Keyboard/mouse 6. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator Ii. 1x Speaker 1. Type: Desktop 2. Port: Mini Jack Iii. 1x Steel Cabinet W/ Lock 1. Metal Drawer Office Drawer 2. File Cabinet Storage With Wheel Iv. 1x Smart Tv 55” Tv Led For Cctv V. 1x Printer 1. Laser Printer A4 2. A4 Print Speed Up To 48 Ppm 3. Auto 2-sided (duplex) Printing, 1-line Lcd 4. Wifi, Airprint, Mopria, Wifi Direct, Lan, Usb 2.0 5. Colored Printer Vi. Instructor Station Table Specification: Vii. 11x Two-way Vhf Radiotelephone (walkie-talkie) With Charging Connection Viii. 1x Table Size: At Least L 1700 X W 700 X H 750 Mm 1. Material: Formica Matt Laminate On Chipboard Ix. 1x Ergodynamic Chair X. 1x Document Metal Cabinet With Glass Sliding Door 1. Size: 1850x 400mmx 900mm 2. Door Lock 1 Set 4.4 Engine Simulator Scenario Development Station A. Scenario Development Station As An Instructor Station Capable Of Deploying Scenarios To Other Stations (bridge And Engine) 1. 1x Computer (minimum Requirements) 2. 2x 24” Monitor 3. Intel Core I5 Processor 4. 16 Gb Ram 5. 256 M.2 Ssd 6. Rtx 4070 Or Higher 7. Keyboard/mouse 8. Ups 1.5kva A. Surge Protection B. W/ Automatic Voltage Regulator B. 1x Table Size: At Least L 1200 X W 800 X H 750 Mm I. Material: Formica Matt Laminate On Chipboard Ii. 1x Ergodynamic Chair 5. Software Requirements 5.1 Full Mission Engine Room Simulator 5.2 Mini Engine Room Simulator 5.3 Instructor Station 5.4 Simulator Scenario Development Station 1. The Simulator Scenario Development Station Shall Be Integrated With All Engine Stations And Instructor Stations, And Can Act As An Instructor Station Capable Of Deploying Scenarios To Other Stations (bridge And Engine) 2. The Simulator Scenario Development Station Shall Have The Same Software And Control Capabilities As The Instructor Station. (see Section B 5.5.3) 1 Set C. Briefing/ Debriefing Station For Bridge And Engine A. 2x Computer (minimum Requirements) 1. 1 X Pc 2. Intel Core I5 Processor 3. 16 Gb Ram 4. 500gb Ssd 5. Low Profile Video Card 6. 1x Keyboard/mouse 7. 1x Ups 1kva 8. 1x W/ Computer Table Size: At Least L 1700 X W 700 X H 750 Mm 9. Briefing And Debriefing Rooms With Playback Capability (playing Of Recorded Exercise And Assessment In Simulator B. 50x Chairs C. 1x Solid Round Table (at Least 6100 X 1220 Mm) (for Bridge Briefing/debriefing) I. (metal Legs With Laminate Board Or Solid Wood Table) D. 1x Solid Round Table (at Least 4880 X 1220 Mm) (for Engine Briefing/debriefing) I. (metal Legs With Laminate Board Or Solid Wood Table) E. 1x Smart Tv At Least 70" 4k 1. Wall Mounted. 2. 2x Hdmi 10meters F. 4x Bridge And 4x Engine) Hardware For Virtual Bridge Familiarization (minimum Requirements) 1. Display: A. Type: Lcd B. Resolution: 2064 X 2208 Per Eye C. Refresh Rate: 120 Hz D. Field Of View: E. Horizontal: 97 Degrees F. Vertical: 93 Degrees 2. Processor: A. Chipset: Qualcomm Snapdragon Xr2 Gen 2 3. Ram: 12gb 4. Storage: A. Options: 128gb, 256gb, And 512gb Variants 5. Audio: 6. Hand Tracking: Improved Hand Tracking Capability 7. Controllers: A. Type: Meta Touch Pro Controllers B. Features: Haptic Feedback, Improved Ergonomics, Rechargeable Batteries 8. Battery: A. Headset: Approximately 2-3 Hours Of Active Use B. Charging: Usb-c Fast Charging 9. Connectivity: A. Wireless: Wi-fi 6e Support B. Bluetooth: 5.2 10. Inclusions: A. Headset B. Touch Pro Controllers (pair) C. Charging Cable (usb-c) D. Power Adapter W/ Extra 1 Battery Each E. Controller Lanyards F. Glasses Spacer Ii. Add On’s: 1. 2x Strap With Battery 2. 8x Silicone Cover Face Cover 3. 4x Silicone Protective Case 4. 8x Silicone Case For Controller 5. 3 Row Vr Storage Cabinet With Lock G. The Virtual Reality Bridge Must Be Complete With Hotspots, Identification Tags And Descriptions. It Shall Also Be Available On An Offline System, Navigable. H. Playback Capability With The Following Functions: · Loading A Previously Created Exercise On A Chart Or In Engine Room; · Playing The Exercise To Explain The Task; · Uploading A Sample Log Of The Same Exercise To Explain The Correct Actions. I. Virtual Bridge Familiarization W/ Virtual Reality Device The Vr System Aims To Simulate The Overhauling Process, Enabling Immersive, Hands-on Learning And Pre-assessment Without Direct Physical Intervention On The Engine. This Approach Will Enhance Technical Skills, Reduce Risk, And Improve Efficiency In Real-world Engine Maintenance And Overhauling. The Supplier Shall Provide A Virtual Bridge And Engine With The Use Of Virtual Reality Providing The Following Visualizations: 1. Bridge Wing Equipment 2. Speaker Mic 3. Rate Of Turn 4. Engine Rpm 5. Quick Release Lifebouy 6. Remote Panel 7. Gyro Compass Repeater 8. Fire Box 9. Hatch For Maintenance 10. Thermometer Ii. Main Bridge 1. Epirb 2. Sart 3. Clear View Screen 4. Location Of Fire Extinguishers 5. Pantry With Equipment 6. Pilot Chair 7. Smoke Detectors 8. Damage Control Plans 9. Radar 1 And 2 And 3 10. Gps With Other Equipment 11. Helm Wheel 12. Indicator Control 13. Deck Light Control 14. Admiralty And Other Maritime Publications 15. Fireplan 16. Rudder Angle Indicator 17. Voice Recorder 18. Whistle Horn 19. Water Tight Door Indicators 20. Window Wipers 21. Pa Systems 22. Cargo Hold Fan Control 23. Smoke Alarm System 24. Fire Alarm System 25. General Alarm System 26. Vhf System 27. Log Books And Other Documentation 28. Ecdis Voyage Planner 29. Pressure Recorder 30. Portable Uhfs 31. Lifejackets, Rocket Flare, And Rocket Line 32. Location Of Immersion Suits 33. Barometer 34. Utc Clock 35. Radio Room Configuration 36. Posters 37. Charts 38. Compass Deck / Monkey Island 39. Radar Equipment 40. Antennas 41. Anemometer 42. And Other Equipment On The Monkey Bridge Iii. The Me-b Main Engine Vr Overhauling System Cover The Following Features Full-scale, Interactive Models Allowing For A Detailed Exploration Of All Engine Components, Including: Iv. Connection Rod & Crosshead Assembly V. Stuffing Box Assembly Vi. Piston Assembly Vii. Cylinder Liner Assembly Viii. Cylinder Cover Assembly Ix. Exhaust Valve Assembly X. The Vr Simulation Guides Users Through Disassembling, Inspecting, And Reassembling The Exhaust Valve, Focusing On Critical Tasks Like Checking Valve Seats, Spindle Condition, And Wear On Sealing Surfaces. Users Can Also Simulate Tasks Such As Lapping The Valve, Inspecting Hydraulic Actuators, And Ensuring Proper Seating Of The Valve During Reassembly. 1 Set D. Server Station For Bridge And Engine A. 2x Set Computer (minimum Requirements) 1. Intel Core I5 Processor 2. 16 Gb Ram 3. 4x 500 Ssd 4. Keyboard/mouse 5. License Operating System B. 1x Nas And Exercise Server 1. 4 Bay Nas Disk Station Quadcore Processor 2. 4x 4 Tb Hdd C. 1x Server Rack 1. Server Rack At Least 32u 2. W/ Fan D. 1x Ups 1. 5kva (5kw) 2. Sealed Lead-acid (sla) Or Lithium-ion 3. Output Voltage: 230v Ac 4. Surge Protection 5. Stabilizes Incoming Voltage Without Switching To Battery Mode 25 Sets E. Cloud Simulator-ready Computers A. Laptop 1. 13th Gen Intel Core I5-1335u 2. 16 Gb, 2 X 8 Gb, Ddr4. 2666 Mhz 3. 512 Gb, M2, Pcie Nvme, Ssd 4. Intel Iris Xe Graphics 5. Windows 11 Pro License 6. Wi-fi 6 Wireless Lan And Bluetooth 7. Keyboard With Numeric Keypad 8. 15.6", Fhd 1920x1080, 120hz, Wva, Non-touch, Anti-glare, 250 Nit, Narrow Border, Led-backlit 9. Ports: Usb 2.0, Headset Jack, Power Jack,hdmi 1.4, Usb 3.2 Gen 1 Type-a, Usb 3.2 Gen 1 Type-c™ 10. Power Adapter: 220v Ac Input, 65w 11. Accessories: Wireless Mouse 1 Set F. Network And Cctv A. 1 X High Speed Router For Remote Support B. Network Switch 1. Network Switch Specifications Manage: 2. 4x 24 Ports 10/100/1000mbps Rj45 Ports 3. 1x 8 Ports 10/100/1000mbps Rj45 Ports C. Set Cctv Monitoring 1. 1x Nvr At Least 32 Channel 2. 20x 6 Mp Fixed Dome Network Camera With Mic 3. 3x 6tb Storage (design For Cctv) D. Network Requirements: I. 72x Lan Port Ii. 1x Lot: Of Upvc, Conduit, Pull Box, Fittings, Hanger, And Support And Other Materials If Needed. Including Utp Cat6 Shielded Pure Copper, Fiber Optic Cable, Patch Panels. Iii. Installation, Engineering Labor For Entire Project. Iv. Cable Laying, Labeling, Harnessing V. Mobilization And Di-mobilization Vi. All Cabling Will Be Endpoint At Server Room (back Of Full Mission Bridge Simulator) E. Structured Cabling Systems Standard I. Stations Must Include Lan Outlets And Patch Cords. Ii. Backbone Cabling Will Be Using The Cable Tray For Lan Distribution. Iii. Lan Outlets Must Have Network Labeling Iv. Patch Panels Are Required G. Civil Works A. Program Of Work Separate Documents (attached) Part Ii. Other General Requirements 1 Ea. Project Billboard/signboard 1 L.s Occupational Safety And Health Program 1 L.s Mobilization/demobilization Part Iii. Civil, Mechanical, Electrical, & Sanitary/plumbing Works Part A. Earthworks 1 L.s Removal Of Structures And Obstruction Part C. Finishings And Other Civil Works 179.71 M² Wall, Metal Frame, Fiber Cement Board 6mm 37.92 M² Tempered Glass Door, 12mm, Reflective 23.04 M² Aluminum Glass Window 4.05 M² Doors, Solid Panel 406.28 M² Acoustical Ceiling Panel 745.2 M² Painting Works, Masonry/concrete 4.05 M² Painting Works, Wood 48.38 M² 150mm Chb Nonload Bearing(including Reinforcing Steel) 48.38 M² Plain Cement Plaster Finish 116 M² Floor Tiles, Imo Rubber, On Finish Floor 211.6 M² Floor Tiles, Imo Rubber, On Raised Floor System Part D. Electrical 1 L.s Panelboard With Main And Branch Breakers 1 L.s Wires And Wiring Devices 1 L.s Lighting Fixtures And Lamps 1 L.s Conduit, Boxes, And Fittings 1 L.s Pole Mounted Power Transformer (oisc) 1 L.s Network Cabling Part E. Mechanical 1 L.s. Door Access And Card Reader System Part F. Simulator Equipment 1 L.s Airconditioning, Package/split Type H. Terms And Conditions 1. A 3-year Warranty For The Computer Hardware And Console Peripherals 2. All Workstations Shall Have Imo Standard Rubber Mat Flooring. 3. The Software Comes With A 3-year Warranty Inclusive Of New Updates. 4. The Project Will Be Implemented Within 150 Cd. Liquidating Damages Will Be Applicable For Any Delays. 5. A Comprehensive Guide Will Be Provided, Offering Detailed Instructions On System Operation And Maintenance Activities, Facilitating Ease Of Use And System Upkeep. 6. Onsite Training Sessions Will Be Conducted By Certified Instructors And Technical Experts, Facilitating Smooth Knowledge Transfer And Ensuring Proficient System Operation. Certificates Will Be Provided Upon Completion Of Training Sessions. 7. Structured Cabling Standards To Establish A Reliable And Efficient Network Infrastructure. 8. The Simulator Manufacturer Should Be An Iso 9001:2015 And Iso 14001:2015 Certified Business. 9. The Simulator Should Be Certified By An Internationally Recognized Classification Society And May Also Be Certified By National Authorities. 10. The Software Must Be Perpetual License. 11. The Supplier Shall Conduct An Annual Face-to-face Maintenance Session To Ensure The System's Optimal Functionality And Performance. 12. The Supplier Must Resolve Any Software Or Hardware Issues Within 2 To 5 Cd Of Their Occurrence To Minimize Downtime And Disruptions. 13. All Hardware Installations Must Adhere To Software Specifications To Guarantee Seamless Integration And Operation. 14. The Computer Hardware Supplied Must Be Sourced From Proven Technology Hardware Companies, Quality And Performance Standards To Ensure Optimal Functionality And Compatibility With The Software. 15. Bidders Are Required To Offer Continuous Retraining Sessions Free Of Charge During The Warranty Period To Ensure Users' Proficiency With The System. 16. Bidders Should Provide Manufacturer Authorization Or Exclusivity Certificate To Ensure The Authenticity And Legality Of The Supplied Products. 17. The Bidder Is Responsible For Performing A Thorough Site Inspection, And A Site Inspection Certificate Issued By The Agency Shall Be Submitted As Part Of The Eligibility Requirements. 18. The Bridge Simulator Shall Be Integrated With The Engine Simulator Ensuring Compatibility And Functionality. 19. All Simulator Stations Can Connect And Enable Them To Interact With Each Other In A Coordinated Scenario. 20. The Simulator Scenario Development Station Shall Be Capable Same As An Instructor Station Capable Of Deploying Scenarios To Other Stations. 21. All Other Simulator Specifications And Capabilities Not Indicated Herein, The Simulator Shall Comply With The Simulator Performance Standards As Required In Maritime Industry Authority (marina) Evaluation Instrument For Full Mission Bridge And Engine Simulator. 22. The Bidders Should Provide A Breakdown Of The Unit Prices Of The Major Components In The Original Of Duly Signed And Accomplished Price Schedule(s) Under Financial Component Envelope Upon Bid Submission. Furthermore, They Should Provide A More Detailed Breakdown As A Condition For Issuance Of Notice To Proceed. ~~~~nothing Follows~~~~

Details: Description Republic Of The Philippines Province Of Sorsogon Municipality Of Irosin Bids & Awards Committee Invitation To Bid For Supply & Delivery Of Information Technology Equipment And Supplies For Disaster Risk Reduction Emergency Operations Center 1. The Local Government Unit Of Irosin, Through The Ldrrmf 2024/unexpended Balance Drrmf Cy 2022 Intends To Apply The Sum Of Five Hundred Four Thousand Eight Hundred Pesos (p 504,800.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Supply & Delivery Of Information Technology Equipment And Supplies For Disaster Risk Reduction Emergency Operations Center, Good-43-2024. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Name Of Contract : Supply & Delivery Of Information Technology Equipment And Supplies For Disaster Risk Reduction Emergency Operations Center Brief Description: 2units Desktop: All-in-one, I5 Processor, 23.8” Full Hd Borderless Ips Display (non-touch), Windows 11 Home, 8gb Ddr5 Ram 5600, 512gb Ssd, Wireless Keyboard & Mouse, Integrated Wi-fi 7 & Bluetooth, Integrated 5mp Fhd Webcam With Privacy Shutter/ 3pcs External Hard Drive: 2tb, Mechanical Hard Disk, Usb 3.0, 5400rpm, 2.5-inch, 5400 Rpm/4pcs Usb Flash Drive: 64gb, Usb 3.0, Usb 3.0 (backwards Compatible With Usb 2.0), 0.26” X 1.67” X 0.52”, Up To 150mb/s/ 1pc Laptop: I5 Process 120u, 8gb Ram, 512gb Nvme Ssd, 15.6” Display With Ips (in-plane Switching) Technology, Intel ® Graphics, Windows 11 Home, Microsoft Office For Home And Student 2021/ 5units Ups: Run Time For Load 410 W: 0 Min 43s, Main Input Voltage: 230v, Rated Power In W: 410w, Rated Power In Va: 750 Va, Output Connection Type: 4 Iec 60320 C13, Cable Length: 1.22m, Number Of Cables: 1, Battery Type: Lead-acid Battery/ 1pc Printer: A4 Wi-fi Duplex All-in-one Ink Tank Printer, Compact Integrated Tank Design, Print Speeds Up To 10.5ipm For Black And 5.0ipm For Colour, Auto-duplex Printing, Wi-fi & Wi-fi Direct, Borderless Printing Up To A4 Size, Spill-free Ink Refilling/ 1unit Aircon: 2hp Inverter Split Type, Gold In, High Energy Efficiency, Pcb Protection, Refrigerant Leakage Detection, High-grade Plastic Panel (fcu), Powder Painted Metal (cdu), Self-clean, Intelligent Ducting Switch, Emergency Function Use, 4 Way Airflow, Heap Filter/ 3pc 4 Drawer Vertical Cabinet Recessed Handle, Storage Cabinet, Cupboard, Steel Filling Cabinet/ 1pc Black Leather Reclining Executive Chair With Ergonomic Function, Rotatable And Adjustable; With Footrest/3pc Electric Stand Fan; 3pc Industrial Fan: 26” (60mm) Metal Blade, Motor: 250w, 3 Speed, Fan Speed: 1,600rpm, Low Noise, Adjustable Height, Adjustable Panning/oscillation Angle, Cast Iron Base/ 2pc Heavy Duty Industrial Mobile Fan: 24” (600mm) 3-leaf Metal Fan Blade, 170w, 3-speed Settings, Max Speed: 1,110rpm, Max Airflow: 302 M3 /min, 360° Rotation Of The Fan In Its Stand, Non-continuous Rotary Switch, Powder-coated Stand And Drum Enclosure, Sealed Type Bearing Motor, Durable Plastic Side Handles, Mobile Wheel For Easy Transfer, Non-skid Rubber Footing, Equipped With Resettable Thermal Fuse (tco), Double Insulated Ac Cord, Dimensions: 76 X 30 X 76 Cm (l X W X H)/ 1pc Magnetic Whiteboard With Stand: Double Sided (90cm X 120cm)/ 3pc Whiteboard (90cm X 120cm)/ 10pc Storage Box: 155l Approved Budget For The Contract : P 504,800.00 Contract Duration : 30 Calendar Days Delivery Period : 7 Calendar Days After The Issuance Of Notice To Proceed Source Of Fund : Ldrrmf 2024/unexpended Balance Drrmf Cy 2022 2. The Local Government Unit Of Irosin Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By Seven(7) Calendar Days. Bidders Should Have Completed For The Last Two(2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent(60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Priveleges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Local Government Unit Of Irosin And Inspect The Bidding Documents At The Address Given Below From 8:00 Am-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 21, 2024, November 28, 2024 From The Given Address And Philgeps Website And Lgu-irosin Website And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of One Thousand Pesos (p 1,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees By Presenting In Person The Official Receipt Of Bid Documents To The Bac Office. 6. The Local Government Unit Of Irosin Will Not Hold A Pre-bid Conference. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before November 28, 2024, 8:59 Am At Bac Office, Municipal Compound, San Julian, Irosin, Sorsogon. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On November 28, 2024, 9:00 Am At The Given Address Below Conference Room, Office Of The Mayor, Municipal Compound, San Julian, Irosin, Sorsogon. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 10. The Local Government Unit Of Irosin Reserves The Right To Accept Any And All Bids, Declare A Failure Of Bidding Or Not Award A Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations(irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11.for Further Information, Please Refer To: Fritzie Riva L. Michelena Mdrrmo Municipal Compound, San Julian, Irosin, Sorsogon Url: Www.irosin.gov.ph 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Philgeps Website And Www.irosin.gov.ph Date Of Issue: November 21, 2024 _____________________ Noel D. Mercado Ii Bac Chairman Instruction To Bidders 1. Scope Of Bid The Procuring Entity, Local Government Unit Of Irosin Invites Bids For The Supply & Delivery Of Information Technology And Supplies For Disaster Risk Reduction Emergency Operations Center, With Project Identification Number Good-43-2024. [note: The Project Identification Number Is Assigned By The Procuring Entity Based On Its Own Coding Scheme And Is Not The Same As The Philgeps Reference Number, Which Is Generated After The Posting Of The Bid Opportunity On The Philgeps Website.] The Procurement Project (referred To Herein As “project”) Is Composed Of 1 Lot Nutribun, The Details Of Which Are Described In Section Vii (technical Specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding Ldrrmf 2024/unexpended Balance Drrmf Cy 2022 As Indicated Below For In The Amount Of Five Hundred Four Thousand Eight Hundred Pesos (p 504,800.00). 2.2. The Source Of Funding Is: Ldrrmf 2024/unexpended Balance Drrmf Cy 2022 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manual And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Invitation To Bid By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Inspected The Site, Determined The General Requirements Of This Project, Including Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices The Procuring Entity, As Well As The Bidders And Suppliers, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. A.foreign Ownership Exceeding Those Allowed Under The Rules May Participate Pursuant To: Iii. When The Goods Sought To Be Procured Are Not Available From Local Suppliers; Or B. Foreign Ownership Limited To Those Allowed Under The Rules May Participate In This Project. 5.3. Pursuant To Section 23.4.1.3 Of The 2016 Revised Irr Of Ra No. 9184, The Bidder Shall Have An Slcc That Is At Least One(1) Contract Similar To The Project The Value Of Which, Adjusted To Current Prices Using The Psa’s Cpi, Must At Least Equivalent To: A. For The Procurement Of Expandable Supplies: The Bidder Must Have Completed A Single Contract That Is Similar To This Project, Equivalent To At Least Twenty-five Percent (25%) Of The Abc. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.2 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un, Subject To Domestic Preference Requirements Under Itb Clause 18. 7. Subcontracts 7.1. The Bidder May Subcontract Portions Of The Project To The Extent Allowed By The Procuring Entity As Stated Herein, But In No Case More Than Twenty Percent (20%) Of The Project. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 7.2 Subcontracting Is Not Allowed During The Bidding. 7.3 Subcontracting Is Not Allowed During The Contract Implementation Stage. 7.4 Subcontracting Of Any Portion Of The Project Does Not Relieve The Supplier Of Any Liability Or Obligation Under The Contract. The Supplier Will Be Responsible For The Acts, Defaults, And Negligence Of Any Subcontractor, Its Agents, Servants, Or Workmen As Fully As If These Were The Contractor’s Own Acts, Defaults, Or Negligence, Or Those Of Its Agents, Servants, Or Workmen. 8. Pre-bid Conference The Procuring Entity Will Not Hold A Pre-bid Conference For This Project. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Viii( Checklist Of Technical And Financial Documents). 10.2. The Bidder’s Slcc As Indicted In Itb Clause 5.3 Should Have Completed Within The Last Two(2) Years Prior To The Deadline For The Submission And Receipt Of Bids. 10.3. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. Similar To The Required Authentication Above, For Contracting Parties To The Apostile Convention, Only The Translated Documents Shall Be Authenticated Through The Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Viii( Checklist Of Technical And Financial Documents). 11.2. If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity, A Certification From Dti Shall Be Provided By The Bidder In Accordance With Section 43.1.3 Of The 2016 Revised Irr Of Ra No. 9184. 11.3. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.4. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 3184. 12. Bid Prices 12.1 Prices Indicated On The Price Schedule Shall Be Entered Separately In The Following Manner: A.for Goods Offered From Within The Procuring Entity’s Country: I. The Price Of The Goods Quoted Exw(ex-works,ex-factory,ex-warehouse,ex-showroom, Or Off The Shelf, As Applicable); Ii. The Cost Of All Custom Duties And Sales And Other Taxes Already Paid Or Payable; Iii. The Cost Of Transportation, Insurance, And Other Costs Incidental To Delivery Of The Goods To Their Final Destination; And Iv. The Price Of Other(incidental) Services, If Any, Listed In The Bds. 13. Bid And Payment Currencies 14.1. For Goods That The Bidder Will Supply From Outside The Philippines, The Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Adopted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreigh Currencies, Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 14.2. Payment Of The Contract Price Shall Be Made In: Philippine Pesos 14. Bid Security 15.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 15.2. The Bid And Bid Security Shall Be Valid Until One Hundred Twenty(120) Calendar Days. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 15. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission To The Given Website Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 16. Deadline For Submission Of Bids The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 17. Opening And Preliminary Examination Of Bids 18.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 18.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 18. Domestic Preference 18.1 The Procuring Entity Will Grant A Margin Of Preference For The Purpose Of Comparison Of Bids In Accordance With Section 43.1.2 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, Bidders May Submit A Proposal On Any Of The Lots Or Items And Evaluation Will Be Undertaken On A Per Lot Or Item Basis, As The Case Maybe. In This Case, The Bid Security As Required By Itb Clause 14 Shall Be Submitted For Each Lot Or Item Separately. 19.3. The Descriptions Of The Lots Or Items Shall Be Indicated In Section Vii(technical Specifications), Although The Abcs Of These Lots Or Items Are Indicated In The Bds For Purposes Of The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184. The Nfcc Must Be Sufficient For The Total Of The Abcs For All The Lots Or Items Participated In By The Prospective Bidder. 19.4. The Project Shall Be Awarded As Follows: Option 1- One Project Having Several Items That Shall Be Awarded As One Contract. 20. Post Qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps), And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Bid Data Sheet Itb Clause 5.3 For This Purpose, Contracts Similar To The Project Shall Be: A.supply & Delivery Of Information Technology Equipment And Supplies For Disaster Risk Reduction Operations Center Brief Description: 2units Desktop: All-in-one, I5 Processor, 23.8” Full Hd Borderless Ips Display (non-touch), Windows 11 Home, 8gb Ddr5 Ram 5600, 512gb Ssd, Wireless Keyboard & Mouse, Integrated Wi-fi 7 & Bluetooth, Integrated 5mp Fhd Webcam With Privacy Shutter/ 3pcs External Hard Drive: 2tb, Mechanical Hard Disk, Usb 3.0, 5400rpm, 2.5-inch, 5400 Rpm/4pcs Usb Flash Drive: 64gb, Usb 3.0, Usb 3.0 (backwards Compatible With Usb 2.0), 0.26” X 1.67” X 0.52”, Up To 150mb/s/ 1pc Laptop: I5 Process 120u, 8gb Ram, 512gb Nvme Ssd, 15.6” Display With Ips (in-plane Switching) Technology, Intel ® Graphics, Windows 11 Home, Microsoft Office For Home And Student 2021/ 5units Ups: Run Time For Load 410 W: 0 Min 43s, Main Input Voltage: 230v, Rated Power In W: 410w, Rated Power In Va: 750 Va, Output Connection Type: 4 Iec 60320 C13, Cable Length: 1.22m, Number Of Cables: 1, Battery Type: Lead-acid Battery/ 1pc Printer: A4 Wi-fi Duplex All-in-one Ink Tank Printer, Compact Integrated Tank Design, Print Speeds Up To 10.5ipm For Black And 5.0ipm For Colour, Auto-duplex Printing, Wi-fi & Wi-fi Direct, Borderless Printing Up To A4 Size, Spill-free Ink Refilling/ 1unit Aircon: 2hp Inverter Split Type, Gold In, High Energy Efficiency, Pcb Protection, Refrigerant Leakage Detection, High-grade Plastic Panel (fcu), Powder Painted Metal (cdu), Self-clean, Intelligent Ducting Switch, Emergency Function Use, 4 Way Airflow, Heap Filter/ 3pc 4 Drawer Vertical Cabinet Recessed Handle, Storage Cabinet, Cupboard, Steel Filling Cabinet/ 1pc Black Leather Reclining Executive Chair With Ergonomic Function, Rotatable And Adjustable; With Footrest/3pc Electric Stand Fan; 3pc Industrial Fan: 26” (60mm) Metal Blade, Motor: 250w, 3 Speed, Fan Speed: 1,600rpm, Low Noise, Adjustable Height, Adjustable Panning/oscillation Angle, Cast Iron Base/ 2pc Heavy Duty Industrial Mobile Fan: 24” (600mm) 3-leaf Metal Fan Blade, 170w, 3-speed Settings, Max Speed: 1,110rpm, Max Airflow: 302 M3 /min, 360° Rotation Of The Fan In Its Stand, Non-continuous Rotary Switch, Powder-coated Stand And Drum Enclosure, Sealed Type Bearing Motor, Durable Plastic Side Handles, Mobile Wheel For Easy Transfer, Non-skid Rubber Footing, Equipped With Resettable Thermal Fuse (tco), Double Insulated Ac Cord, Dimensions: 76 X 30 X 76 Cm (l X W X H)/ 1pc Magnetic Whiteboard With Stand: Double Sided (90cm X 120cm)/ 3pc Whiteboard (90cm X 120cm)/ 10pc Storage Box: 155l B. Completed Within The Last Two(2) Years From The Date Of The Submission Of Bids 7.1 Not Applicable Since Sub-contracting Is Not Allowed. 12 The Price Of Goods Shall Be Quoted Ddp Lgu-irosin, Irosin, Sorsogon. 14.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration Or Any Of The Following Forms And Amounts: A. [two Percent (2%) Of Abc], If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; B. [five Percent (5%) Of Abc] If Bid Security Is In Surety Bond. 19.3 Information Technology And Supplies 2units Desktop: All-in-one, I5 Processor, 23.8” Full Hd Borderless Ips Display (non-touch), Windows 11 Home, 8gb Ddr5 Ram 5600, 512gb Ssd, Wireless Keyboard & Mouse, Integrated Wi-fi 7 & Bluetooth, Integrated 5mp Fhd Webcam With Privacy Shutter/ 3pcs External Hard Drive: 2tb, Mechanical Hard Disk, Usb 3.0, 5400rpm, 2.5-inch, 5400 Rpm/4pcs Usb Flash Drive: 64gb, Usb 3.0, Usb 3.0 (backwards Compatible With Usb 2.0), 0.26” X 1.67” X 0.52”, Up To 150mb/s/ 1pc Laptop: I5 Process 120u, 8gb Ram, 512gb Nvme Ssd, 15.6” Display With Ips (in-plane Switching) Technology, Intel ® Graphics, Windows 11 Home, Microsoft Office For Home And Student 2021/ 5units Ups: Run Time For Load 410 W: 0 Min 43s, Main Input Voltage: 230v, Rated Power In W: 410w, Rated Power In Va: 750 Va, Output Connection Type: 4 Iec 60320 C13, Cable Length: 1.22m, Number Of Cables: 1, Battery Type: Lead-acid Battery/ 1pc Printer: A4 Wi-fi Duplex All-in-one Ink Tank Printer, Compact Integrated Tank Design, Print Speeds Up To 10.5ipm For Black And 5.0ipm For Colour, Auto-duplex Printing, Wi-fi & Wi-fi Direct, Borderless Printing Up To A4 Size, Spill-free Ink Refilling/ 1unit Aircon: 2hp Inverter Split Type, Gold In, High Energy Efficiency, Pcb Protection, Refrigerant Leakage Detection, High-grade Plastic Panel (fcu), Powder Painted Metal (cdu), Self-clean, Intelligent Ducting Switch, Emergency Function Use, 4 Way Airflow, Heap Filter/ 3pc 4 Drawer Vertical Cabinet Recessed Handle, Storage Cabinet, Cupboard, Steel Filling Cabinet/ 1pc Black Leather Reclining Executive Chair With Ergonomic Function, Rotatable And Adjustable; With Footrest/3pc Electric Stand Fan; 3pc Industrial Fan: 26” (60mm) Metal Blade, Motor: 250w, 3 Speed, Fan Speed: 1,600rpm, Low Noise, Adjustable Height, Adjustable Panning/oscillation Angle, Cast Iron Base/ 2pc Heavy Duty Industrial Mobile Fan: 24” (600mm) 3-leaf Metal Fan Blade, 170w, 3-speed Settings, Max Speed: 1,110rpm, Max Airflow: 302 M3 /min, 360° Rotation Of The Fan In Its Stand, Non-continuous Rotary Switch, Powder-coated Stand And Drum Enclosure, Sealed Type Bearing Motor, Durable Plastic Side Handles, Mobile Wheel For Easy Transfer, Non-skid Rubber Footing, Equipped With Resettable Thermal Fuse (tco), Double Insulated Ac Cord, Dimensions: 76 X 30 X 76 Cm (l X W X H)/ 1pc Magnetic Whiteboard With Stand: Double Sided (90cm X 120cm)/ 3pc Whiteboard (90cm X 120cm)/ 10pc Storage Box: 155l 20.2 Licenses And Permits Relevant To The Project And The Corresponding Law Requiring It: Bir Registration 21.2 Licenses And Permits Relevant To The Project And The Corresponding Law Requiring It: None General Conditions Of Contract 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. Additional Requirements For The Completion Of This Contract Shall Be Provided In The Special Conditions Of Contract(scc). 2. Advance Payment 2.1 Advance Payment Of The Contract Amount Is Provided Under Annex “d” Of The Revised 2016 Irr Of Ra No. 9184. 2.2 The Procuring Entity Is Allowed To Determine The Terms Of The Payment On The Partial Or Staggered Delivery Of The Goods Procured, Provided Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted In Accordance With Prevailing Accounting And Auditing Rules And Regulations. The Terms Of Payment Are Indicated In The Scc. 3. Performance Security Within Ten (10) Calendar Days From Receipt Of The Notice Of Award By The Bidder From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr. 4. Inspection And Tests The Procuring Entity Or Its Representatives Shall Have The Right To Inspect And/or The Test The Goods To Confirm Their Conformity To The Project. In Addition To Tests In The Scc, Section Vii(technical Specifications) Shall Specify What Inspections And/or Tests The Procuring Entity Requires, And Where They Are To Be Conducted. The Procuring Entity Shall Notify The Supplier In Writing, In A Timely Manner, Of The Identify Of Any Representatives Retained For These Purposes. All Reasonable Facilities And Assistance For The Inspection And Testing Of Goods, Including Access To Drawings And Production Data, Shall Be Provided By The Supplier To The Authorized Inspectors At No Charge To The Procuring Entity. 5. Warranty 7.1. In Order To Assure The Manufacturing Defects Shall Be Corrected By The Supplier, A Warranty Shall Be Required From The Supplier As Provided Under Section 62.1 Of The 2016 Revised Irr Of Ra No. 9184. 7.2. The Procuring Entity Shall Promptly Notify The Supplier In Writing Of Any Claims Arising Under This Warranty. Upon Receipt Of Such Notice, The Supplier Shall, Repair Or Replace The Defective Goods Or Parts Thereof Without Cost To The Procuring Entity, Pursuant To The Generic Procurement Manual. 6. Liability Of The Supplier The Supplier’s Liability Under This Contract Shall Be Provided By The Laws Of The Republic Of The Philippines. If The Supplier Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. Special Conditions Of Contract Gcc Clause 1 Delivery And Documents – For Purposes Of The Contract, “exw,” “fob,” “fca,” “cif,” “cip,” “ddp” And Other Trade Terms Used To Describe The Obligations Of The Parties Shall Have The Meanings Assigned To Them By The Current Edition Of Incoterms Published By The International Chamber Of Commerce, Paris. The Delivery Terms Of This Contract Shall Be As Follows: [for Goods Supplied From Within The Philippines] “the Delivery Terms Applicable To This Contract Are Delivered [indicate Place Of Destination]. Risk And Title Will Pass From The Supplier To The Procuring Entity Upon Receipt And Final Acceptance Of The Goods At Their Final Destination.” Delivery Of The Goods Shall Be Made By The Supplier In Accordance With The Terms Specified In Section Vi (schedule Of Requirements). For Purposes Of This Clause The Procuring Entity’s Representative At The Project Site Is Wilson G. Baliwas. Incidental Services – The Supplier Is Required To Provide All Of The Following Services, Including Additional Services, If Any, Specified In Section Vi. Schedule Of Requirements: A. Performance Or Supervision Of On-site Assembly And/or Start-up Of The Supplied Goods; B. Furnishing Of Tools Required For Assembly And/or Maintenance Of The Supplied Goods; C. Furnishing Of A Detailed Operations And Maintenance Manual For Each Appropriate Unit Of The Supplied Goods; D. Performance Or Supervision Or Maintenance And/or Repair Of The Supplied Goods, For A Period Of Time Agreed By The Parties, Provided That This Service Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And E. Training Of The Procuring Entity’s Personnel, At The Supplier’s Plant And/or On-site, In Assembly, Start-up, Operation, Maintenance, And/or Repair Of The Supplied Goods. F. No Additional Incidental Service Requirements. The Contract Price For The Goods Shall Include The Prices Charged By The Supplier For Incidental Services And Shall Not Exceed The Prevailing Rates Charged To Other Parties By The Supplier For Similar Services. Spare Parts – The Supplier Is Required To Provide All Of The Following Materials, Notifications, And Information Pertaining To Spare Parts Manufactured Or Distributed By The Supplier: 1. Such Spare Parts As The Procuring Entity May Elect To Purchase From The Supplier, Provided That This Election Shall Not Relieve The Supplier Of Any Warranty Obligations Under This Contract; And 2. In The Event Of Termination Of Production Of The Spare Parts: I. Advance Notification To The Procuring Entity Of The Pending Termination, In Sufficient Time To Permit The Procuring Entity To Procure Needed Requirements; And Ii. Following Such Termination, Furnishing At No Cost To The Procuring Entity, The Blueprints, Drawings, And Specifications Of The Spare Parts, If Requested. The Spare Parts And Other Components Required Are Listed In Section Vi (schedule Of Requirements) And The Costs Thereof Are Included In The Contract Price. The Supplier Shall Carry Sufficient Inventories To Assure Ex-stock Supply Of Consumable Spare Parts Or Components For The Goods For A Period Of Twelve(12) Months. Spare Parts Or Components Shall Be Supplied As Promptly As Possible, But In Any Case, Within Twelve(12) Months Of Placing The Order. Packaging – The Supplier Shall Provide Such Packaging Of The Goods As Is Required To Prevent Their Damage Or Deterioration During Transit To Their Final Destination, As Indicated In This Contract. The Packaging Shall Be Sufficient To Withstand, Without Limitation, Rough Handling During Transit And Exposure To Extreme Temperatures, Salt And Precipitation During Transit, And Open Storage. Packaging Case Size And Weights Shall Take Into Consideration, Where Appropriate, The Remoteness Of The Goods’ Final Destination And The Absence Of Heavy Handling Facilities At All Points In Transit. The Packaging, Marking, And Documentation Within And Outside The Packages Shall Comply Strictly With Such Special Requirements As Shall Be Expressly Provided For In The Contract, Including Additional Requirements, If Any, Specified Below, And In Any Subsequent Instructions Ordered By The Procuring Entity. The Outer Packaging Must Be Clearly Marked On At Least Four (4) Sides As Follows: Name Of The Procuring Entity Name Of The Supplier Contract Description Final Destination Gross Weight Any Special Lifting Instructions Any Special Handling Instructions Any Relevant Hazchem Classifications A Packaging List Identifying The Contents And Quantities Of The Package Is To Be Placed On An Accessible Point Of The Outer Packaging If Practical. If Not Practical The Packaging List Is To Be Placed Inside The Outer Packaging But Outside The Secondary Packaging. Transportation – Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip, Or Ddp, Transport Of The Goods To The Port Of Destination Or Such Other Named Place Of Destination In The Philippines, As Shall Be Specified In This Contract, Shall Be Arranged And Paid For By The Supplier, And The Cost Thereof Shall Be Included In The Contract Price. Where The Supplier Is Required Under This Contract To Transport The Goods To A Specified Place Of Destination Within The Philippines, Defined As The Project Site, Transport To Such Place Of Destination In The Philippines, Including Insurance And Storage, As Shall Be Specified In This Contract, Shall Be Arranged By The Supplier, And Related Costs Shall Be Included In The Contract Price. Where The Supplier Is Required Under Contract To Deliver The Goods Cif, Cip Or Ddp, Goods Are To Be Transported On Carriers Of Philippine Registry. In The Event That No Carrier Of Philippine Registry Is Available, Goods May Be Shipped By A Carrier Which Is Not Of Philippine Registry Provided That The Supplier Obtains And Presents To The Procuring Entity Certification To This Effect From The Nearest Philippine Consulate To The Port Of Dispatch. In The Event That Carriers Of Philippine Registry Are Available But Their Schedule Delays The Supplier In Its Performance Of This Contract The Period From When The Goods Were First Ready For Shipment And The Actual Date Of Shipment The Period Of Delay Will Be Considered Force Majeure. The Procuring Entity Accepts No Liability For The Damage Of Goods During Transit Other Than Those Prescribed By Incoterms For Ddp Deliveries. In The Case Of Goods Supplied From Within The Philippines Or Supplied By Domestic Suppliers Risk And Title Will Not Be Deemed To Have Passed To The Procuring Entity Until Their Receipt And Final Acceptance At The Final Destination. Intellectual Property Rights – The Supplier Shall Indemnify The Procuring Entity Against All Third-party Claims Of Infringement Of Patent, Trademark, Or Industrial Design Rights Arising From Use Of The Goods Or Any Part Thereof. 2.2 Partial Payment Is Applicable Provided That Such Partial Payment Shall Correspond To The Value Of The Goods Delivered And Accepted. 4 The Inspections And Tests That Will Be Conducted Are: Inspection Of The Information Technology Equipment And Supplies If It Follows The Technical Specification Set By The End-user Units. Section Vi. Schedule Of Requirements The Delivery Schedule Expressed As Weeks/months Stipulates Hereafter A Delivery Date Which Is The Date Of Delivery To The Project Site. Item Number Description Quantity Total Delivered, Weeks/months 1 Desktop All-in-one 2unit 2 External Harddrive 3pcs 3 Usb Flashddrive 4pcs 4 Laptop 1 Pc 5 Ups 5unit 6 Printer 1pc 7 Aircon 1unit 8 4 Drawer Vertical Cabinet 3pcs 9 Reclining Executive Chair 1pc 10 Electric Stand Fan 3pcs 11 Industrial Fan 3 Pcs 12 Heavy Duty Industrial Mobile Fan 2pcs 13 Magnetic Whiteboard With Stand 1pc 14 Whiteboard 3pcs 15 Storage Box 10pcs Remarks Indicate Here Any Other Appropriate Information As May Be Necessary. Signature Over Printed Name Position Department/division Section Vii. Technical Specifications Item Specification Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution Subject To The Applicable Laws And Issuances.] 1 Desktop All-in-one 2 External Harddrive 3 Usb Flashdrive 4 Laptop 5 Ups 6 Printer 7 Aircon 8 4 Drawer Vertical Cabinet 9 Reclining Executive Chair 10 Electric Stand Fan 11 Industrial Fan 12 Heavy Duty Industrial Mobile Fan 13 Magnetic Whiteboard With Stand 14 Whiteboard 15 Storage Box Technical Specifications Technical Specifications Item / Service Maximum Quantity Technical Specifications / Scope Of Work Statement Of Compliance [bidders Must State Here Either “comply” Or “not Comply” Against Each Of The Individual Parameters Of Each Specification Stating The Corresponding Performance Parameter Of The Equipment Offered. Statements Of “comply” Or “not Comply” Must Be Supported By Evidence In A Bidders Bid And Cross-referenced To That Evidence. Evidence Shall Be In The Form Of Manufacturer’s Un-amended Sales Literature, Unconditional Statements Of Specification And Compliance Issued By The Manufacturer, Samples, Independent Test Data Etc., As Appropriate. A Statement That Is Not Supported By Evidence Or Is Subsequently Found To Be Contradicted By The Evidence Presented Will Render The Bid Under Evaluation Liable For Rejection. A Statement Either In The Bidder's Statement Of Compliance Or The Supporting Evidence That Is Found To Be False Either During Bid Evaluation, Post-qualification Or The Execution Of The Contract May Be Regarded As Fraudulent And Render The Bidder Or Supplier Liable For Prosecution.] Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages) In Accordance With Section 8.5.2 Of The Irr; (b) Registration From Sec, Department Of Trade And Industry(dti) For Sole Proprietorship And Cda For Cooperatives (c) Valid Mayor’s Permit By The City Or Municipality Where The Principal Place Of Business Is Located (d) Tax Clearance Per Eo 398 Technical Documents ⬜ (e) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (c) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided For In Sections 23.4.1.3 And 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184, Within The Relevant Period As Provided In The Bidding Documents; And ⬜ (d) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission Or Original Copy Of Notarized Bid Securing Declaration; And ⬜ (e) Conformity With The Technical Specifications, Which May Include Production/delivery Schedule, Manpower Requirements, And/or After-sales/parts, If Applicable; And ⬜ (f) Original Duly Signed Omnibus Sworn Statement (oss) And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (g) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc) Or A Committed Line Of Credit From A Universal Or Commercial Bank In Lieu Of Its Nfcc Computation. (h) Audited Financial Statement Stamped, Received By The Bir Or Its Duly Accredited And Authorized Institutions, For The Immediately Preceding Calendar Year, Showing The Total Assets And Liabilities Which Should Not Be Earlier Than Two(2) Years From The Date Of Bid Submission Class “b” Documents ⬜ (i) If Applicable, A Duly Signed Joint Venture Agreement (jva) In Case The Joint Venture Is Already In Existence Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (j) Original Of Duly Signed And Accomplished Financial Bid Form; And ⬜ (k) Original Of Duly Signed And Accomplished Price Schedule(s). Other Documentary Requirements Under Ra No. 9184 (as Applicable) ⬜ (l) [for Foreign Bidders Claiming By Reason Of Their Country’s Extension Of Reciprocal Rights To Filipinos] Certification From The Relevant Government Office Of Their Country Stating That Filipinos Are Allowed To Participate In Government Procurement Activities For The Same Item Or Product. ⬜ (m) Certification From The Dti If The Bidder Claims Preference As A Domestic Bidder Or Domestic Entity.   Omnibus Sworn Statement(revised) Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. Select One, Delete The Other: If A Sole Proprietorship: I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. Select One, Delete The Other: If A Sole Proprietorship: As The Owner And Sole Proprietor Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] As Shown In The Attached Duly Notarized Special Power Of Attorney; If A Partnership, Corporation, Cooperative, Or Joint Venture: I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g. Duly Notarized Secretary’s Certificate, Board/partnership Resolution Or Special Power Of Attorney, Whichever Is Applicable]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For And In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. Select One, Delete The Rest: If A Sole Proprietorship: The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Partnership Or Cooperative: None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; If A Corporation Or Joint Venture: None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Following Responsibilities As A Bidder: A) Carefully Examine All Of The Bidding Documents; B) Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C) Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D) Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay, Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Of Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling(estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 Series Of 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This ___________ Day Of __________________, 2024 At ____________, Philippines. _____________________________________ Bidder’s Representative/authorized Signatory [insert Signatory’s Legal Capacity] Affiant Acknowledgement Before Me, As The Notary Public For And In The City/municipality Of _____________, Personally Appeared _________________, Representing The ________________________ With _____________ Issued On __________ At __________________ And ___________________, _____________________ Representing ________________________ With ______________________ Issued On _________________ At __________________________, Known To Me The Same Persons Who Executed The Foregoing Contract Agreement And They Acknowledged To Me That The Same Are Their True Act And Deed For And In Behalf Of The Parties They Represent. This Instrument Consists Of ____ Pages Including This Page On Which The Acknowledgement Is Written Duly Signed By The Contracting Parties And Their Witnesses. In Witness Whereof, I Have Hereunto Affixed My Signature And Seal This _______ Day _____________, Philippines. Doc. No. ______________ Page No: ______________ Book No. ______________ Series Of 2024. Republic Of The Philipppines ) City Of Sorsogon ) S.s. X ---------------------------------------------------x Bid Securing Declaration Project Identification No. ______ To: [insert Name And Address Of Procuring Entity] I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid-securing Declaration. 2. I/we Accept That: (a) I Will Be Automatically Disqualified From Bidding For Any Procurement Contract With Any Procuring Entity For A Period Of Two(2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen(15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1(f) Of The Irr Of Ra No. 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid-securing Declaration Shall Cease To Be Valid On The Following Circumstances: (a) Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; (b) I Am Declared Ineligible Or Post Disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; And (c) I Am/we Declared As The Bidder With The Lowest Calculated And Responsive Bid And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I Have Hereunto Set My Hand This _____ Day Of ________, 2024 At __________________. _____________________________________ Bidder’s Representative/authorized Signatory [insert Signatory’s Legal Capacity] Affiant Acknowledgement Before Me, As The Notary Public For And In The City/municipality Of _____________, Personally Appeared _________________, Representing The ________________________ With _____________ Issued On __________ At __________________ And ___________________, _____________________ Representing ________________________ With ______________________ Issued On _________________ At __________________________, Known To Me The Same Persons Who Executed The Foregoing Contract Agreement And They Acknowledged To Me That The Same Are Their True Act And Deed For And In Behalf Of The Parties They Represent. This Instrument Consists Of ____ Pages Including This Page On Which The Acknowledgement Is Written Duly Signed By The Contracting Parties And Their Witnesses. In Witness Whereof, I Have Hereunto Affixed My Signature And Seal This _______ Day _____________, Philippines. Doc. No. __________ Page No. __________ Book No. __________ Series Of 2024. Bid Form For The Procurement Of Goods (shall Be Submitted With The Bid) Bid Form Date: _____________________________ Project Identification No.: _____________ To: [name And Address Of Procuring Entity] Having Examined The Philippine Bidding Documents(pbds) Including The Supplemental Or Bid Bulletin Numbers_____, The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Offer To (supply/deliver/perform) (description Of The Goods) In Conformity With The Said Pbds For The Sum Of (total Bid Amount In Words And Figures) Or The Total Calculated Bid Price, As Evaluated And Corrected For Computational Errors , And Other Bid Modifications In Accordance With The Price Schedules Attached Herewith And Made Part Of This Bid. The Total Bid Price Includes The Cost Of All Taxes, Such As, But Not Limited To (specify The Applicable Taxes, E.g. (i) Value Added Tax, (ii) Income Tax, (iii) Local Taxes, And (iv) Other Fiscal Levies And Duties), Which Are Itemized Herein Or In The Price Schedules. If Our Bid Is Accepted, We Undertake: A.to Deliver The Goods In Accordance With The Delivery Schedule Specified In The Schedule Of Requirements Of The Philippine Bidding Documents(pbds); B. To Provide A Performance Security In The Form, Amounts, And Within The Times Prescribed In The Pbds; C. To Abide By The Bid Validity Specified In The Pbds And It Shall Remain Binding Upon Us At Any Time Before The Expiration Of That Period. Until A Formal Contract Is Prepared And Executed, This Bid, Together With Your Written Acceptance Thereof And Your Notice Of Award, Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Bid You May Receive. We Certify/conform That We Comply With The Eligibility Requirements Pursuant To The Pbds. The Undersigned Is Authorized To Submit The Bid On Behalf Of (name Of The Bidder) As Evidenced By The Attached (state The Written Authority). We Acknowledge That Failure To Sugn Each And Every Page Of This Bid Form, Including, The Attached Schedule Of Prices, Shall Be A Ground For The Rejection Of Our Bid. Name: Legal Capacity: Signed: Duly Authorized To Sign The Bid For And On Behalf Of: Date: ___________ Contract Agreement For The Procurement Of Goods(revised) __________________________________________________________________________ This Agreement, Made The _________ Day Of _______________, ________ Between [name And Address Of Procuring Entity] Of The Philippines (hereinafter Called The“entity”) Of The One Part And [name Of Supplier] (hereinafter Called The “supplier”) Of The Other Part. Whereas, The Entity Invited Bids For Certain Goods And Ancillary Services, Particularly (brief Description Of Goods And Services) And Has Accepted A Bid By The Supplier For The Supply Of Those Goods And Services In The Sum Of (contract Price In Words And Figures In Specified Currency) (hereinafter Called The “contract Price”). Now This Agreement Witnesseth As Follows: 1. In This Agreement, Words And Expressions Shall Have The Same Meanings As Are Respectively Assigned To Them In The Conditions Of Contract Hereinafter Referred To. 2. The Following Documents As Required By The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 Shall Be Deemed To Form And Be Read And Construed As Part Of This Agreement, Viz.: I. Philippine Bidding Documents(pbds) I. Schedule Of Requirements; Ii.technical Specifications; Iii.bill Of Quantities Iv.general And Special Conditions Of Contract; V.supplemental Or Bid Bulletins, If Any Ii. Winning Bidder’s Bid, Including The Eligibility Requirements, Technical And Financial Proposals, And All Other Documents Or Statements Submitted; Bid Form, Including All The Documents/statements Submitted; Bid Form, Including All The Documents/statements Contained In The Bidder’s Bidding Envelopes, As Annexes, And All Other Documents Submitted(e.g., Bidder’s Response To Request For Clarifications On The Bid), Including Corrections To The Bid, If Any, Resulting From The Procuring Entity’s Bid Evaluation; C. Performance Security D. Notice Of Award Of Contract And The Bidder’s Conforme Thereto; And E. Other Contract Documents That May Be Required By Existing Laws And/or The Procuring Entity Concerned In The Pbds. Winning Bidder Agrees That Additional Contract Documents Or Information Prescribed By The Gppb That Are Subsequently Required For Submission After The Contract Execution, Such As The Notice To Proceed, Variation Orders And Warranty Security, Shall Likewise Form Part Of The Contract. 3. In Consideration For The Sum Of [total Contract Price In Words And Figures) Or Such Other Sums As May Be Ascertained, [name Of Bidder] Agrees To Execute The [state The Object Of The Contract] In Accordance With His/her/its Bid. 4. The [name Of The Procuring Entity] To Pay The Above-mentioned Sum In Accordance With The Terms Of Bidding. In Witness, Whereof The Parties Thereto Have Caused This Agreement To Be Executed The Day And Year First Before Written. Binding Signature Of The Procuring Entity: Binding Signature Of Supplier: Insert Name And Signature] [insert Name And Signature] [insert Signatory’s Legal Capacity] [insert Signatory’s Legal Capacity] Signed In The Presence Of: ______________________ ________________ Lorenzo G. Ubalde Liaison Officer For: For: [insert Procuring Entity] [insert Name Of Supplier] Acknowledgement Before Me, As The Notary Public For And In The City/municipality Of _____________, Personally Appeared _________________, Representing The ________________________ With _____________ Issued On __________ At __________________ And ___________________, _____________________ Representing ________________________ With ______________________ Issued On _________________ At __________________________, Known To Me The Same Persons Who Executed The Foregoing Contract Agreement And They Acknowledged To Me That The Same Are Their True Act And Deed For And In Behalf Of The Parties They Represent. This Instrument Consists Of ____ Pages Including This Page On Which The Acknowledgement Is Written Duly Signed By The Contracting Parties And Their Witnesses. In Witness Whereof, I Have Hereunto Affixed My Signature And Seal This _______ Day _____________, Philippines. Doc. No. ______________ Page No: ______________ Book No. ______________ Series Of 2024. Bill Of Quantities Item No. Item Quantity Unit Unit Price Total Price Prepared By: ______________ Proprietor Technical Specifications Item No. Item Statement Of Compliance (comply/not Comply) Prepared By: ______________ Proprietor

Details: Description Invitation To Bid Lcp (epa) Ib No. 24-71 The Lung Center Of The Philippines (lcp), Through Its Bids And Awards Committee (bac), Invites Eligible Bidders To Bid For The Early Procurement Activity (epa) For C.y. 2025 Abc Php 55,141,366.00 Procurement For Supply And Delivery Of Medical Supplies For Operating Room (o.r.) Under A Single-year Framework Agreement Lcp (epa) Ib No 24-71 Item / Description Unit Cost Per Item Maximum Quantity Total Cost Per Item 1.absorbable Hemostat, 5.1cm X 10.2cm Oxidized Regenerated Cellulose Pc 3,200.00 350 1,120,000.00 2.absorbable Hemostat, 5.1cm X 10.2cm Oxidized Regenerated Cellulose Structured Non-woven Material Pc 2,500.00 50 125,000.00 3.absorbable Hemostat, 7.6cm X 10.2cm Loose Structured Material 3x4 Inch Oxidized Regenerated Cellulose Pc 2,800.00 180 504,000.00 4.airway Guedel Size 3, Oral Airway Pc 50.00 500 25,000.00 5.airway Guedel Size 4, Oral Airway Pc 50.00 200 10,000.00 6.blue Handpiece Reusable Cable With Piezoelectric Transducers, Convert Electronic Energy Into Ultrasonic Vibration( For Open Procedures) For Existing Machine Pc 205,000.00 2 410,000.00 7.bonewax Sterile Mixture Of Beeswax And Isopropyl Palmitate Pc 250.00 120 30,000.00 8.breathing Circuit Anesthesia 2m Limb W/ 3l Reservoir Bag And 1.5 Extra Limb W/ Bacterial Filter Set 500.00 1500 750,000.00 9.camera Cover Sleeve Pc 250.00 500 125,000.00 10.carbon Dioxide Absorbent White To Violet Sodalime Pail 6,000.00 20 120,000.00 11.central Venous Catheter 2lumen Hemodialysis Set F.11x15cm Side Hole Curved Ext. Pc 3,500.00 50 175,000.00 12.central Venous Catheter 3- Lumen Hemodialysis Set F.12, 3 Lumen, F. Dilator 15-16cm Pc 3,500.00 250 875,000.00 13.central Venous Catheter Hemodialysis Set F.12, 3 Lumen, F. Dilator 12x20cm - Femoral Catheter Pc 3,350.00 150 502,500.00 14.chest Drainage System 2.5l Pressure Regulator Water Seal Drainage Reservoir 2500 Ml Pc 3,800.00 600 2,280,000.00 15.corded Endoscopic Ultrasonic Device Open Shears 9cm Shaft Lenght With Adaptive Technology, Compatible With Existing Machine Pc 35,000.00 5 175,000.00 16.corded, Endoscopic Ultrasonic Shear, Ultrasonic Shear 23cm Shaft Length, 5mm Diameter With Adaptive Tissue Technology And Curved Tip, Compatible With Existing Machine Pc 36,000.00 24 864,000.00 17.corded, Endoscopic Ultrasonic Shear, Ultrasonic Shear 36cm Shaft Length, 6mm Diameter With Adaptive Tissue Technology And Curved Tip, Compatible With Existing Machine Pc 36,000.00 60 2,160,000.00 18.core Needle Biopsy,automatic One-hand Cocking And Energonomic Handle Designed For Both Handling And Control G.14x10 Cm Pc 4,500.00 50 225,000.00 19.clearify Visualization System Pc 3,350.00 50 167,500.00 20.disposable Lap Packs(1) Surgical Lap Disposable,(5) (sterile) Gown, (5) Pcs Hand Towel, (3) Pcs Mayo Stand , (1) Pc Back Table Cover, (1) Pc Suture Bag, (5) Pcs Square Of Drape Pc 1,950.00 250 487,500.00 21.disposable Or Scrub Suit, Large Blouse And Pants, Unsterile Pc 250.00 1000 250,000.00 22.disposable Or Scrub Suit, Medium Blouse And Pants, Unsterile Pc 250.00 1000 250,000.00 23.disposable Or Scrub Suit, Small Blouse And Pants, Unsterile Pc 250.00 500 125,000.00 24.electrosurgical Pad Adult Return Electrode Monitoring Polyhesive With High Moisture, Conductive Water Based Hydrogel, Compatible With Existing Machine, Valleylab / Conmed Pc 550.00 1200 660,000.00 25.electrosurgical Pencil Botton Switch With Blade Eletrode Holster Edge Coated, Compatible With Existing Machine Pc 250.00 500 125,000.00 26.endo Specimen/retrieval Bag 5x8 Pc 3,100.00 100 310,000.00 27.endobronchial Blocker(uniblocker)fr 5 Pc 8,500.00 20 170,000.00 28.endobronchial Blocker(uniblocker)fr.7 Pc 8,500.00 20 170,000.00 29.endobronchial Blocker(uniblocker)fr.9 Pc 8,500.00 20 170,000.00 30.endoclip, Autosuture, 10mm,multifiring Pc 11,500.00 50 575,000.00 31.endobrochial Double Lumen F.35 Left Sided, Pvc, Pre-curved Tip, Pilot Balloon And Connector Pc 4,300.00 500 2,150,000.00 32.endobrochial Double Lumen F.37 Left Sided, Pvc, Pre-curved Tip, Pilot Balloon And Connector Pc 4,300.00 500 2,150,000.00 33.endobronchial Blocker Fr. 7 Blocker Kit, Double Balloon Tip Pc 17,875.00 30 536,250.00 34.endoscopic Articulating Linear Cutter Stapler 45mm With Enhanced System Wide Compression Pc 38,000.00 30 1,140,000.00 35.endoscopic Articulating Linear Cutter Stapler 60mm With Enhanced System Wide Compression Pc 38,000.00 30 1,140,000.00 36.endoscopic Powered Vascular Stapler 35mm With Advanced Placement Tip Pc 42,000.00 30 1,260,000.00 37.endoscopic Linear Cutter Blue Reload 45mm Blue Endoscopic Articulating Linear Cutter Reload With Enhanced System Wide Compression Blue 45 With Free Gun For Every 12 Pcs, Reload Purchased Endoscopic Reload Blue 45mm Pc 9,000.00 60 540,000.00 38.endoscopic Linear Cutter Black 45, Endoscopic Articulating Linear Cutter Reload, With Enhanced System Wide Compression Black 45 With Free Gun For Every 12 Pcs, Reload Purchased Ecr 45mm L With 2mm Dosed Staple Height Pc 9,000.00 120 1,080,000.00 39.endoscopic Linear Cutter Green 45, Endoscopic Articulating Linear Cutter Reload, With Enhanced System Wide Compression Green 45 With Free Gun For Every 12 Pcs, Reload Purchased Ecr 45mm L With 2mm Dosed Staple Height Pc 9,000.00 480 4,320,000.00 40.endoscopic Linear Cutter Blue 60, Endoscopic Articulating Linear Cutter Reload, With Enhanced System Wide Compression Blue 60 With Free Gun For Every 12 Pcs, Reload Purchased Ecr 60mm L With 2mm Dosed Staple Height Pc 10,000.00 60 600,000.00 41.endoscopic Linear Cutter Green 60, Endoscopic Articulating Linear Cutter Reload, With Enhanced System Wide Compression Green 60 With Free Gun For Every 12 Pcs, Reload Purchased Ecr 60mm L With 2mm Dosed Staple Height Pc 10,000.00 180 1,800,000.00 42.endoscopic Linear Cutter Black 60, Endoscopic Articulating Linear Cutter Reload, With Enhanced System Wide Compression Black 60 With Free Gun For Every 12 Pcs, Reload Purchased Ecr 45mm L With 2mm Dosed Staple Height Pc 10,000.00 60 600,000.00 43.endoscopic Reload 45mm Black Roticulator Endoscopic Stapler Reload 45mm With Variable Staple Height Black For Extra Thick Tissues. Compatible With Endos-copic Ultra Gun. It Has New Blade In Each Reload With Free Gun For Every 12 Pcs Pc 12,000.00 120 1,440,000.00 44.endoscopic Reload- 60mm Articulating, Medium/thick Curved Tip Cartridge Purple Staple Size (inner To Outer): 3mm, 3.5mm, 4mm With Free Gun For Every 12 Pcs Pc 12,000.00 120 1,440,000.00 45.endoscopic Reload 60mm Black Roticulator Endoscopic Stapler Reload 60mm With Variable Staple Height Black For Extra Thick Tissues. Compatible With Endos-copic Ultra Gun. It Has New Blade In Each Reload With Free Gun For Every 12 Pcs Pc 12,000.00 120 1,440,000.00 46.endoscopic Reload Single Use 45mm Medium Thick; Curved Tip Purple Use With Tri-staple Technology With Free Gun For Every 12 Pcs Pc 12,000.00 120 1,440,000.00 47.endoscopic Reload, Tan Curved Tip 45mm With Variable Stapleheight Tan For Vascular Tissues, Compatible With Endos- Copic Ultra Gun. It Has New Blade In Each Reload With Free Gun For Every 12 Pcs Pc 12,000.00 120 1,440,000.00 48.endotracheal Tube,reinforced With Stainless-steel Spiral-wound,s.6.0 Pc 700.00 50 35,000.00 49.endotracheal Tube,reinforced With Stainless-steel Spiral-wound,s.6.5 Pc 700.00 50 35,000.00 50.endotracheal Tube,reinforced With Stainless-steel Spiral-wound,s.7.0 Pc 700.00 50 35,000.00 51.endotracheal Tube,reinforced With Stainless-steel Spiral-wound,s.7.5 Pc 700.00 50 35,000.00 52.endotracheal Tube,reinforced With Stainless-steel Spiral-wound,s.8.0 Pc 700.00 50 35,000.00 53.endotracheal Tube,reinforced With Stainless-steel Spiral-wound,s.8.5 Pc 700.00 50 35,000.00 54.face Mask, Anesthesia Adult Lrg Silicone Size 5,air Cushioned, Inflatable Pc 150.00 200 30,000.00 55.face Mask, Anesthesia Adult Med Silicone Size 4, Air Cushioned, Inflatable Pc 150.00 1000 150,000.00 56.face Mask, Anesthesia Adult Med Silicone Size 3, Air Cushioned, Inflatable Pc 350.00 60 21,000.00 57. Implantable Catheter 8-8.5 Implantable Plastic Port Catheter Polyurethane Catheter Ct Rated And Mri Compatible Pc 19,500.00 50 975,000.00 58.laryngeal Mask Airway Protector S. 3.0,< Air 20ml/60 Cm Water With Nasogastric Port Bite Block Pc 5,500.00 30 165,000.00 59.laryngeal Mask Airway Protector S.4.0, < Air 30ml/60 Cm Water With Nasogastric Port Bite Block Pc 5,500.00 10 55,000.00 60.non - Absorbable Polymer Ligation Clips Medium, Large, 6 Clips Per Cartridge That Fits The Existing Clip Applier Pc 3,500.00 140 490,000.00 61.percutaneous Tracheostomy Tube (fr.8) Fen Pc 21,800.00 100 2,180,000.00 62.percutaneous Tracheostomy Tube (fr.8) Non - Fen Pc 21,800.00 100 2,180,000.00 63.powered Vascular Stapler Reload With Advance Placement Tip, 35mm, White Powered Vascular Stapler Reload With Advance Placement Tip, 35mm White With 1.0mm Closed Staple Height W/ Free Gun For Every 12 Pcs Pc 6,300.00 180 1,134,000.00 64.reservoir Silicone Bulb Transparent, Flexible Silicone Reservoir Bulbs To Enhance Patient Satisfaction And Allow For Visible, Continuous Drainage. Pc 650.00 500 325,000.00 65.silicone Drain Fr 19 Round, Hubless Pc 2,880.00 500 1,440,000.00 66.silver Hand Piece Reusable Cable With Piezoelectric Transducers, Convert Electronic Energy Into Ultrasonic Vibration( For Minimally Invasive Procedures) For Existing Machine Pc 230,000.00 10 2,300,000.00 67.skin Stapler For Wound Closure Staple Count Indicator Pc 450.00 200 90,000.00 68.stapler Linear 75 Mm Selectable Tlc Linear Cutter Stapler Pc 15,000.00 5 75,000.00 69.stapler Linear 55 Mm Selectable Tlc Linear Cutter Stapler Pc 13,000.00 5 65,000.00 70.stapler Linear Reload Selectable Mm Ntlc 55 Mm Selectable Reload Pc 4,500.00 12 54,000.00 71.stapler Linear Reload Selectable Mm Ntlc 75 Mm Selectable Reload Pc 4,500.00 48 216,000.00 72.suction Curved Tip Detachable Set With Curved Tip Detachable, Poole, Latex Free Pc 360.00 600 216,000.00 73.suction Set Frazier F. 12, 230cm Tubing Pc 250.00 500 125,000.00 74.suture Polyamide 3/0 25mm 3/8c Reverese Cutting Multipass Needle Pc 216.00 144 31,104.00 75..suture Polyamide 4/0 19mm 3/8c Reverese Cutting Multipass Needle Pc 248.00 144 35,712.00 76.suture Polyamide 5/0 16mm 3/8c Reverese Cutting Multipass Needle Pc 300.00 144 43,200.00 77.suture Poliglecaprone 4.0 Antibac 19mm 3/8 C Reverse Cutting Pc 600.00 252 151,200.00 78.suture Polyglactin Antibac 70cm. 26mm 1/2 Circles Sh 3-0 Pc 350.00 720 252,000.00 79.suture Polyglactin Antibac 910 2.0 70cm, 26cm Urology 6 Pc 400.00 720 288,000.00 80.suture Polyglactin Antibacterial 70cm 19mm 3/8 Reverse Cutting Fs-2 4.0 Pc 450.00 720 324,000.00 81.suture Polyglactin Antibacterial 90cm 36mm 1/2 Circle Mh 2.0 Pc 410.00 360 147,600.00 82.suture Polyglactin With Antibac 0 Plus, Coated Antibac With Irgacare Violet Braided Pc 340.00 360 122,400.00 83.suture Polyglactin, 4/0 Suture Antibac, 70cm. 22mm 1/2 Circle Sh - 4/0 Pc 500.00 360 180,000.00 84.suture Polypropylene 0 36mm 1/2 C Taperpoint Ct-1 Pc 400.00 144 57,600.00 85.suture Polypropylene 2.0 Mh 90cm 36mm 1/2c, Taper Point Pc 700.00 144 100,800.00 86.suture- Polypropylene 3.0 Sh 90cm 26mm 1/2c, Taper Point Pc 1,200.00 144 172,800.00 87.suture- Polypropylene 4.0 Pc-3 Conventioanl Cutting 16mm 3/8c Pc 450.00 72 32,400.00 88.suture- Polypropylene 4.0 Rb1 17mm 1/2 Circle Taper Point Pc 950.00 144 136,800.00 89.suture- Polypropylene 5.0 Bv1 17mm 1/2 Circle Taper Point Pc 1,000.00 144 144,000.00 90.suture- Polypropylene 5.0 Rb1 17mm 1/2 Circle Taper Point Pc 1,000.00 144 144,000.00 91.suture- Polypropylene 6.0 Bv1 9.3mm 3/8 Circle Taper Point Pc 1,300.00 72 93,600.00 92.suture- Polypropylene 7.0 Bv175 8mm Circle Taper Point Pc 2,250.00 72 162,000.00 93.suture Silk 3.0 Braided Non - Absorbable Suture, Atraumatic 25mm Needle, 75mm Length Pc 95.00 1440 136,800.00 94.suture Silk , Precut, 2/0, Silk Black 13 X 60cm. M2 Pc 90.00 700 63,000.00 95.suture Silk ,precut Silk 3/0, Silk Black 13x60cm. M2 Pc 90.00 700 63,000.00 96.suture- Silk 0 Atr 31mm 1/2c Taper Point Pc 300.00 108 32,400.00 97.suture- Silk 0 Precut Silk Precut Black 13 X 60cm. M2 Pc 125.00 120 15,000.00 98.suture Silk 2/0(3m), Silk Branded, Non Absorbable Suture, Atraumatic, 25mm Needle, 75cm Length Pc 95.00 1440 136,800.00 99.suture- Silk 04/0 Precut Silk Precut Black 13 X 60cm. (1.5 Meteric) Pc 170.00 60 10,200.00 100.suture- Silk 4/0 Black Atraumatic Round Needle 20mm, 75cm. (1.5 Meteric) Pc 170.00 60 10,200.00 101.suture- Silk 4/0 Black Atraumatic Round Bodied 17mm 3/8c, 75cm. (1.5 Meteric) Pc 250.00 60 15,000.00 102.vascular Graft,ptfe 60mmx80cm Pc 35,000.00 20 700,000.00 103.wound Protector/elastic Retractor (2-4cm/ Small/xs) With Retraction Ring, Sterile Pc 3,500.00 100 350,000.00 104.wound Protector/elastic Retractor (4 -6cm/medium) With Retraction Ring, Sterile Pc 3,500.00 12 42,000.00 "total (approved Budget For The Contract)" 55,141,366.00 Bidding Documents Can Be Secured From The Bids And Awards Committee (bac) Secretariat Office, Lung Center Of The Philippines, Quezon Avenue, Quezon City, And The Cost Of Non-refundable Bidding Documents Shall Correspond To The Abc Range As Indicated In The Table Below: Approved Budget For The Contract Maximum Cost Of Bidding Documents(in Philippine Peso) 500,000 And Below 500.00 More Than 500,000 Up To 1 Million 1,000.00 More Than 1 Million Up To 5 Million 5,000.00 More Than 5 Million Up To 10 Million 10,000.00 More Than 10 Million Up To 50 Million 25,000.00 More Than 50 Million Up To 500 Million 50,000.00 More Than 500 Million 75,000.00 Schedule Of Activities A. Issuance Of Bidding Documents November 27, 2024 08:00:00 Am To 5:00pm Bac Secretariat Office G/f Lcp Building, Lung Center Of The Phils. Quezon Avenue, Quezon City B. Pre-bid Conference December 5, 2024 Thursday (10:00 Am) Education Training Conference Room 2nd Flr. Lung Center Of The Philippines Quezon Avenue,quezon City C. Submission Of Eligibility, Technical, December 17, 2024 & Financial Requirements And Tuesday (9:00am) Opening Of Bid Education Training Conference Room 2nd Flr. Lung Center Of The Philippines Quezon Avenue, Quezon City For Further Information Contact The Bids And Awards Committee Secretariat At Tel. No. 9246101 Locals 1064 & 1066 Bidding Will Be Conducted Through Open Competitive Bidding Procedures As Specified In The Revised Implementing Rules And Regulations (irr-a) Of Ra 9184, Otherwise Known As The Government Procurement Reform Act. All Particulars Relative To The Activity Shall Be Governed By The Provision Of This Act And Its Implementing Rules And Guidelines. The Bac Reserves The Right To Accept Or Reject Any Of Bids And To Annul The Bidding Process Anytime Prior To The Award Of Contract Without Thereby Incurring Any Liability To The Affected Bidders Or Any Obligation To Inform Bidder Or Bidders. (sgd.)gloanne C. Adolor, Md,mba (health) Chairperson Bid And Awards Committee Iii

Details: In the Fischerwall in the town of Gartz (oder), the dilapidated street lighting consisting of an overhead line is to be dismantled and rebuilt as underground sidewalk lighting in the road body. All cable laying must be carried out as pipe laying. The renewal is carried out on the basis of the quality characteristics specified in DIN EN-13201. Furthermore, all DIN and VDE regulations applicable to the installation of the electrical system must be observed. In accordance with the classification of the road, the following luminaires are used: - Luminaire type Andrea 2 - Manufacturer: Leuchtenbau Finow - Light point height: 4.50 m - Equipment: LED

Details: Description Contract For The Supply Of One (1) Lot Afcs Equipment Consumables Under Pr No. Rs2-2406-181 And Itb No. 2407-143-01r Schedule Of Activities Pre-bid Conference : 25 November 2024 (monday) At 10:00 A.m. Cafeteria, Lrta Line 2- Depot, Santolan, Pasig City Submission Of Bids : 09 December 2024 (monday) At 9:30 A.m. Cafeteria, Lrta Line 2- Depot, Santolan, Pasig City Opening Of Bids : 09 December 2024 (monday) At 10:00 A.m. Cafeteria, Lrta Line 2- Depot, Santolan, Pasig City Complete Details Of The Contract Are In The Bidding Documents, And Can Be Viewed On Philgeps And Lrta Websites. The Light Rail Transit Authority (lrta), Through Its Cob 2024, Intends To Apply The Sum Of Six Million Eight Hundred Thirty-three Thousand Nine Hundred Twenty-nine 00/100 (₱6,833,929.00) Pesos, Inclusive Of All Duties, Taxes, And/or Other Charges, Being The Approved Budget For The Contract (abc) To Payments Under The Afore-mentioned Contract. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Lrta Now Invites Bids From Prospective/interested Bidders With The Following Details: Description Ticket Vending Machine (tvm) 1. 8 Pcs- Sensor, Receive (like Overflow Sensor) ₱42,688.00 2. 15 Pcs- Roller, Single Drive B ₱100,215.00 3. 15 Pcs- Roller, Passive (big) ₱87,795.00 4. 15 Pcs- Roller, Reverse Drive ₱115,740.00 5. 15 Pcs- Roller, Dual Drive B ₱87,795.00 6. 30 Pcs- U-shaped Bracket, Press Spring ₱150,750.00 7. 30 Pcs- Spring, Shaft 0.5 ₱150,750.00 8. 30 Pcs- Spring, Shaft 0.6 ₱150,750.00 9. 30 Pcs- Holder, Shaft Press ₱144,540.00 10. 2 Pcs- Stepper Motor (for Sjt Issuing Module) ₱28,266.00 11. 6 Pcs- Electromagnet, Solenoid M001 (coin/diverter Solenoid) ₱53,748.00 12. 2 Pcs- Buzzer ₱13,776.00 13. 15 Pcs- Door Switch, Short (chs,svt, Hopper Switch) ₱69,165.00 14. 3 Pcs- Dc Motor (sjt Magazine Motor) ₱42,399.00 15. 6 Pcs- Sensor, Transmit (coin Vault Sensor Tx) ₱27,666.00 16. 6 Pcs- Sensor, Receive (coin Vault Sensor Rx) ₱27,666.00 17. 10 Pcs- Sensor, Transmit (like Overflow Sensor) ₱53,350.00 18. 2 Pcs- Cover Plastic, Ticket Issuing Module ₱13,776.00 19. 8 Pcs- Roller, Feeder Drive ₱55,104.00 20. 30 Pcs- Roller, Passive (press Roller Equivalent To Old) ₱169,380.00 21. 30 Pcs- Holder, Spring 0.5 ₱160,050.00 22. 30 Pcs- Holder, Spring 0.6 ₱160,050.00 23. 10 Pcs- Timing Belt (172xl) ₱63,700.00 24. 15 Pcs- Timing Belt (45mxl) ₱80,025.00 25. 10 Pcs- Timing Belt (53mxl) ₱53,350.00 26. 10 Pcs- Timing Belt (94mxl) ₱56,460.00 27. 10 Pcs- Timing Belt (347.2mxl)( Sjt Issuing Belt) ₱74,050.00 28. 4 Pcs- Slide, 12" (railing) ₱25,480.00 29. 4 Pcs- Lock (lcd Lock) ₱29,620.00 30. 2 Pcs- Note Box ₱322,206.00 31. 2 Pcs- Ligthing, Led-12v ₱11,706.00 32. 2 Pcs- Lighting, Led-24v (for Tvm Return Cup) ₱10,050.00 33. 2 Pcs- Lighting, Round 24v (tvm Maintenance Light) ₱32,406.00 34. 10 Pcs- Chs Flexible Hose ₱51,630.00 35. 2 Pcs- Coin Hopper ₱64,566.00 36. 10 Pcs- Bna6 Overhauling Kit Or Its Equivalent ₱629,200.00 Note: Equivalent Offers For Item Nos. 1-36 Must Fit And Be Compatible With The Existing Line 2 East Ticket Vending Machine (tvm) Equipment Msi/elis Infotech Systems Co..ltd Model: V-c2125 (please Refer To Attached Files For Item Specifications/ Usage And Pictures) Automatic Gates (ag) 37. 15 Pcs- Door Switch, Long ₱72,270.00 38. 2 Pcs- Speaker ₱12,740.00 39. 10 Pcs- Electromagnet (ag-diverter Solenoid) ₱89,580.00 40. 10 Pcs- Electromagnet (ag-insert Bezel Solenoid) ₱105,100.00 41. 10 Pcs- Geared Motor, Transport (ag-transport Motor) ₱141,330.00 42. 5 Pcs- Geared Motor (ag-elevator Motor For Old) ₱44,790.00 43. 15- Sensor (like Weigth Det Sensor) ₱87,795.00 44. 150- Roller, Main Drive ₱722,700.00 45. 150- Roller, Press Or Its Equivalent ₱645,000.00 46. 6 - Timing Belt (490xl) (tcm Belt) ₱50,640.00 47. 5 - Gas Spring ₱42,200.00 48. 5 - Gas Spring (dt) ₱44,790.00 49. 2 - Latch, Lock ₱18,950.00 50. 6 - Reader Bracket For Secondary Antenna ₱53,748.00 Note: Equivalent Offers For Item Nos. 37-50 Must Fit And Be Compatible With The Existing Line 2 East Automatic Gates (ag) Msi/elis Infotech Systems Co..ltd Model: G-x0c1 (please Refer To Attached Files For Item Specifications/ Usage And Pictures) Pos / Sc And Common Parts 51. 30 - Sensor (transmit) White ₱141,420.00 52. 30 - Sensor (receive) Black ₱141,420.00 53. 15 - Sensor, U-shaped (m) (prep Sensor) ₱70,710.00 54. 30 - Sensor, U-shaped (h) (diverter/coin Shutter Sensor) ₱141,420.00 55. 15 - Sensor, Retro-reflective (like Stacker Sensor Small) ₱134,370.00 56. 2 - Emc Filter ₱26,196.00 57. 6 - Magazine (ag/tvm) ₱78,588.00 58. 6 - Cru Casing With Db9 Port Or Its Equivalent ₱31,422.00 59. 4 - Keyboard/mouse Or Its Equivalent ₱17,892.00 60. 10 - Fujitsu Cutter Assembly ₱56,230.00 61. 10 - Pos Sam Or Its Equivalent ₱46,800.00 62. 10 - Ag-sam Or Its Equivalent ₱46,800.00 63. 10 - Sjt Sam Or Its Equivalent ₱46,800.00 64. 10 - Svc Sam Or Its Equivalent ₱46,800.00 65. 2 - Coin Box ₱85,190.00 66. 4 - Mini Hdmi Antenna Cable ₱25,480.00 67. 30 - Ups Battery 12v ₱154,890.00 Note: Equivalent Offers For Item Nos. 51-67 Must Fit And Be Compatible With The Existing Line 2 East Point Of Sale (pos) & Server Computer (sc) (please Refer To Attached Files For Item Specifications/ Usage And Pictures) Approved Budget For The Contract (abc) Grand Total: ₱ 6,833,929.00 Bid Security Cash/cc-mcbank Draft/ Guarantee Or Ilc (2%) ₱ 136,678.58 Surety Bond (5%) ₱ 341,696.45 Cost Of Bid Documents ₱ 10,000.00 Note: Prospective Bidders Have The Option To Post A Bid Securing Declaration Which Commits To Pay The Corresponding Amount As Fine And Be Suspended For A Period Of Time From Being Qualified To Participate In Any Government Procurement Activity In The Event It Violates Any Of The Conditions Stated Therein As Required In The Guidelines Issued By The Gppb. The Contract Period Is Eight (8) Months Upon Receipt Of Contract / Purchase Order (p.o.). Bidders Should Have Completed, Within Fifteen (15) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedure Using A Non-discretionary” Pass/fail” Criterion As Specified In The 2016 Implementing Rules And Regulations (r-irr) Of Republic Act No. 9184. Bidding Is Restricted To Filipino Citizens / Sole Proprietorships, Partnerships, Corporations, Cooperatives Or Joint Ventures With At Least Sixty (60%) Percent Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. Prospective Bidders May Obtain Further Information From Lrta And Inspect The Bidding Documents At The Bac Secretariat Office, Lrta Line 2 Depot, Marcos Highway, Santolan, Pasig City During Office Hours From 8:00 A.m. To 5:00 P.m. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On 15 November 2024 (friday) Until Not Later Than The Deadline For The Submission And Receipt Of Bids From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Indicated Above. The Lrta Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Through Personal Appearance, Facsimile, Or Through E-mail. The Lrta Will Hold A Pre-bid Conference On The Date And Address As Described Above, Which Shall Be Open To Prospective Bidders. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Address Indicated Above On Or Before 09 December 2024 (monday) At 9:30 A.m. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In The Instruction To Bidders And The Bid Data Sheet. Bid Opening Shall Be 09 December 2024 (monday) At 10:00 A.m.at The Address Indicated Above. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. The Lrta Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Atty. Aylwinston C. Pillos Head, Bac Secretariat Bac Secretariat Office Lrta Line 2 Depot, Marcos Highway, Santolan, Pasig City Tel. Nos. 647-3484 To 85 Loc. 29872 Email Address: Bacsec@lrta.gov.ph Facsimile No. 647-3484 To 85 Loc. 29906/29 You May Visit The Following Websites: Https://www.lrta.gov.ph/ Https://philgeps.gov.ph/

Details: Description Item Number Description Qty Unit Estimated Budget 1 (hand Held) Portable Ultrasound Unit 3 Units 1,800,000.00 General Specification Probe Characteristics • 128 Physical Channel Beamforming • Black-and-white Mode For Displaying Anatomy In Real-time • Color-coded Overlay For Real-time Blood Flow Imaging • Harmonic Imaging For Increased Signal-to-noise Ratio And Reduced Artifacts From Side Lobes, Grating Lobes And Reverberations, Resulting In Superior Tissue Definition And Reduced Speckle Artifacts. With The Greater Penetration Of Lower Ultrasound Frequencies, High-quality Harmonic Imaging At Greater Depth Can Be Performed. • Selectable Centerline Marker • Selectable Focal Zone Marker • Selectable Tgc Control With 6 Depth-dependent Gain Controls • Total Scan Time Of 50 Minutes With Fully Charged Battery (with 80% Black And White, 20% Color Imaging) • Any Qi-compliant Wireless Charger Can Be Used To Charge Probe • Recharge Battery In 75 Minutes From 10% To 90% Battery Capacity • Dimensions: 131 X 64 X 31 Mm • Weight: 205 +/- 3 Grams • Ip67 Rated Curved Array Transducer For Deep Scanning • Specific Clinical Applications And Exam Types Include: Abdominal, Fetal/obstetrics, Gynecological, Urology, Thoracic/lung, Cardiac (adult And Pediatric, 40 Kg And Above), Vascular/peripheral Vascular, Musculoskeletal (conventional), Pediatrics, Interventional Guidance (includes Free Hand Needle/catheter Placement, Fluid Drainage, Nerve Block And Biopsy) • Broad-bandwidth Curved Array: From 2 - 5 Mhz With Center Frequency Of 3.3 Mhz • Number Of Elements: 128 • Footprint: 64 Mm X 16 Mm (lens) • Viewing Angle: 60° • Depth: Up To 24 Cm Linear Array Transducer For Shallow Scanning • Specific Clinical Applications And Exam Types Include: User Interface The Device Offers Ultrasound Imaging With A Minimized Number Of Keys And Intuitive Thumb-controllable Touchscreen User Interface. The Device App Supports Portrait As Well As Landscape Mode To Optimize Image Size And Ergonomics For Different Use Scenarios. • Single Key/gesture To Control Freeze/unfreeze, Store, Color On/off, Gain And Depth Control • 2 Steps To Change Preset With Appropriate Transducer • 2 Steps To Start Reviewing Images From An Exam • Presets With Optimized Settings For Imaging Different Organs. User- Selectable Default Preset For Immediate Use After Starting The App. • Measurements: Distance, Ellipse • Device Configuration And Management Tools In Easy Reach Through Swiping In Menu: • Enablement Of Tgc Controls, Preview Mode, Storage Of Binary Images •setting Auto Freeze Time, Video Duration • Configuration Of Probe Button Function (freeze Or Store) • Download User Manual In Selectable Language To Device App •diagnostics In Device App With Ability To Upload Lg Files To Manufacturer Server • Direct Access To Customer Support Information •link To Cloud-based Educational Materials • Information About Software Status Of Probe And App With Ability To Un- And Re-register Data Storage Patient Data Identification: • Manual Data Entry Of Patient Information For An Exam • Select From Dicom Modality Worklist On Request. Such Worklist Supports Consistent Labeling Of Images, Video Clips And Exams Before Export To Dicom Pacs. Exam Data On Device • Data For Up To 500 Exams Can Be Stored On Mobile Device • Data Is Stored In Generic Formats: Jpg For Still Frames, Mpg For Videos • Complementing Storage Of Binary Image Data Can Be Selected. Such Data Could Be Useful For Further Image Analytics In Collaboration With Manufacturer. • Data Is Organized As Individual Examinations With Collection Of Images And Can Be Linked With Patient Identification • All Stored Data Can Be Recalled For Review Data Export • Anonymized Images And Videos Can Be Shared With Other Apps Available On Smart Device • Images, Video Clips Or Exams With Or Without Patient Information Can Be Wirelessly Exported In Generic Formats (jpg, Mp4) To Shared Network Folders • Images, Video Clips Or Exams With Patient Information Can Be Wirelessly Exported In Dicom Format To Dicom Pacs Supported Dicom Services • Verify • Modality Worklist • Store • Storage Commitment • Secure Dicom (tls) Data Security • Secured Data At Rest: O Device App Starts Only After Confirmation Of Mobile Device Protection With User Authentication • Images And Other Patient Information Data Are Stored In Private Space Of Device With No Access From Other Apps On Mobile Device • Images Are Stored On Device Without Embedded Patient Identification And Linked With Encrypted Patient Database • Fips 140-2 Compliant Database Encryption (aes-256 Bit Encryption) • User Selectable, Additional Pin Protected Access To Patient Data On Device App "• Wiping Off Exam Data After 10 Attempts With Incorrect Pin " " • Secured Data On The Move:" • Images Are Anonymized Before Being Shared With Other Apps On The Mobile Device • Support Of Enterprise-grade Wireless Encryption Standards Including Eap And Wpa2 (psk) • Tls Encryption With Optional Peer Authentication To Support Secure Dicom Transfer • Configurable Time Period For Image Removal On The Device After Export To A Dicom Pacs Server Standard Configuration " The Following Items Are Included In The Standard" • Device Offering: • Device Cl Probe • Device App (device For Ios And Device For Android) • Protective Carrying Case • Hardcopy Quick Start Guide • Electronic Instruction Use Guide • Wireless Charger Pad Including Micro-usb • Cable Country-specific Ac Adapter Available Accessories • Hardcopy User Manual In Different Languages • Additional Protective Carrying Case • Additional Wireless Charger Pad • International Ac Adapters Supported Mobile Platforms Operating System Options • Android Phones And Tablets With Os Version 9, 10 Or 11, Device With 0x64 Arm Based Cpu Architecture And 64-bit Kernel, Android Open Gl Es 3.0, And Compatibility With Google Play™ Store • Ipad And Iphone Devices With Ios 13 Or 14 Screen Requirements • Size: From 5 To 20 Inches • 960 X 640 (or 640 X 960) Pixel Or More Internal Memory Requirements • 8gb Or More Connectivity Requirements • Ieee 802.11n • Peer-to-peer Connectivity (android Only) • Bluetooth Ble 4.0 Security Requirements • Wpa2™ • Data On Device Must Be Encrypted And Authentication Enabled User Support Tools Device Family Web Portal • Online Services To Enhance The Device Experience By Providing Resources, From Product Information To Clinical And Service Support • Additional Educational Resources Will Be Posted On The Device Web Portal, Including Webinars, Thought Leadership, Further Online Programs And Training Opportunities Ultrasound Education Solutions To Help Users Get Familiar With Common Point-of-care Applications And Improve Ultrasound Skills And Knowledge, Two Digital Education Solutions Are Available Via Our Partners. Point Of Care Ultrasound Focusclass By 123 Sonography • This Course Includes Access To Five Hours Of High-quality Video Content, Easy-to-follow Hands-on Demos, Practical Clinical Examples And Proven Didactive Principles To Help Increase Competence And Confidence. This Program Is Designed For Primary Care Covering A Variety Of Ultrasound Exam Types Including Cardiac, Ob, Abdominal, Lung And Joints • Provides Convenient Ultrasound Education Through Integrated Didactic Instruction, Hands-on Training, And Knowledge Assessment. A Portable, Virtual Ultrasound Training Experience Utilizing Real Patient Cases With A Broad Spectrum Of Normal And Pathologic Conditions. This Offering Includes A Sonosim Probe, Sonosim Drive, And Your Choice Of Five Modules Immediately Accessible Online – Choose From A Wide Selection Of Modules Including Anatomy, Physiology, And Clinical Procedures. Safety Conformance Safety Classification • Device Cl Probe Is Classified As Internally Powered Medical Electrical Equipment With Type Bf Applied Parts According To Iec 60601-1v • Device Cl Probe Is Ce-marked According To Mdd (93/43/eec), Red (2014/53/eu), Rohs (2011/65/eu), And Is Compliant To 2012/19/eu (weee) • Device For Android And Device For Ios Are Ce-marked According To Mdd (93/42/eec) Device Conforms To Applicable Clauses Of The Following Safety Standards: • Iec 60601-1 Medical Electrical Equipment – Part 1: General Requirements For Basic Safety And Essential Performance • Iec 60601-1-2 Medical Electrical Equipment – Part 1-2: General Requirements For Basic Safety And Essential Performance – Collateral Standard: Electromagnetic Disturbances – Requirements And Tests (group One, Class B Per Cispr 11 / En 55011) • Iec 60601-2-37 Medical Electrical Equipment – Part 2-37: Particular Requirements For The Basic Safety And Essential Performance Of Ultrasonic Medical Diagnostic And Monitoring Equipment Iec 60601-1-11 Medical Electrical Equipment – Part 1-11: General Requirements For Basic Safety And Essential Performance – Collateral Standard: Requirements For Medical Electrical Equipment And Medical Electrical Systems Used In The Home Healthcare Environment Iec 60601-1-12 Medical Electrical Equipment Part 1-12: General Requirements For Basic Safety And Essential Performance – Collateral Standard: Requirements For Medical Electrical Equipment And Medical Electrical Systems Intended For Use In The Emergency Medical Services Environment En 13718-1 Medical Vehicles And Their Equipment –air Ambulances Part 1: Requirements For Medical Devices Used In Air Ambulances En 1789 Medical Vehicles And Their Equipment –road Ambulances Iso 10993-1 Biological Evaluation Of Medical Devices Part 1: Evaluation And Testing Within A Risk Management Process Iec62304 Medical Device Software – Software Life Cycle Processes. Iec62366-1 Medical Devices – Part 1: Application Of Usability Engineering To Medical Devices - 1 Gallon Ultrasound Gel Tablet General Specification Processor • A14 Bionic •6-core Cpu •4-core Graphics •16-core Neural Engine Storage & Ram •64gb/256gb • 4 Gb Lpddr4x Sdram Display • Liquid Retina Display • Led Backlit Multi‑touch Display With Ips Technology • 2360-by-1640-pixel Resolution At 264 Pixels Per Inch (ppi) • True Tone • 500 Nits Brightness • Fingerprint-resistant Oleophobic Coating • Supports Apple Pencil • (usb-c) • Supports Apple Pencil • (1st Generation) " Battery & Charging" • Usb-c Port •7,606 Mah Li-ion/•built‐in 28.6‐watt‐hour Connectivity •wi-fi 6 (802.11ax) With 2x2 Mimo •simultaneous Dual Band •bluetooth 5.2 Landscape Stereo Speakers •dual Microphones For Calls, Video Recording, And Audio Recording •umts/hspa/hspa+/dc‑hsdpa •5g (sub-6 Ghz)3 •gigabit Lte (up To 32 Bands)3 •gps/gnss •data Only8 •wi-fi Calling3 -certificate Of Good Standing From 2 Institutions Using This Ultrasound Unit -training And Certification Of Health Personnel To Use The Ultrasound Unit Xxxxxxx Total: 1,800,000.00

Details: Description Supply Of Laboratory Equipment For The Project Entitled Project 2: Establishment Of Pharmaceutical Sciences Service For Clinical Research (107-198) (1) Freeze Dryer General Specifications ● Chamber Maximum Capacity: 8l ● Condenser Maximum Capacity: 10l ● Sublimation Rate: 2-4 L/ Day ● Set Temperature Range: -60°c To -90°c ● Pressure Range: 0.01 To 10 Torr ● Compressor: 1/2 Hp ● Defrost Type: Manual ● Dimensions: Width - 390-410 Mm, Depth - 520 - 540 Mm, Height - 405 - 425 Mm ● Maximum Weight: 65 Kg ● Power Supply: 230 V, 50/60 Hz ● Allows Automatic Or Manual Process Control ● Temperature, Vacuum, And Timer Can Be Controlled ● Automatic Rapid Integrated Hot Gas Defrost Function For Quick Next Cycle Turn-around ● Homogeneous Temperature Distribution Across All Shelves In Dry Chamber Made Of Stainless Steel ● Backlight Lcd Display Indicates Temperature And Vacuum ● Ce Certified And Unique Serial Number For Tracing ● Controller: Jog-dial-switch (turn + Push) And Touch Button Inclusions: ● Accessories ○ T-type Manifold, 12 Ports With Handle Valve And Silicone Stopper ○ Dry Chamber, Acrylic, 8 Ports With Vacuum Handle And Silicone Stopper ○ Shelves, 3 Stages, Stainless Steel For Dry Chamber ○ Vacuum Handle Valve ○ 40 Ml, 80 Ml, 200 Ml Flasks With Silicone Flask Tops ○ Glass Tube Adapters ● Vacuum Pump ○ 1/3 Hp ○ 1450 Rpm Motor Ration ○ 84 L/min Max Flow Rate ○ 670 Mmhg Max Vacuum Terms And Conditions: 1. Delivery Of Sixty (60) To Ninety (90) Days After Po Awarding 2. Basic Documented Verification Of The Equipment Functionality 3. All Parts Of The Equipment And Its Accessories Must Be Identified By Part Number Or Accessory Number 4. Installation, Calibration, And Initial Operation Of The Equipment Done By Qualified Service Engineer As Part Of The Bid Price 5. Operations And Service Manual Must Be Provided 6. Standard Operating Procedures (eg. Cleaning, Routine Maintenance, Etc.) If Available 7. Local Training Of At Least 2 End-user (personnel) At The College Of Pharmacy Or The Supplier’s Laboratory To Operate, Troubleshoot, And Maintain Equipment 8. Warranty, Parts, And Preventive Maintenance For Two (2) Years Or More 9. Certification/guarantee On Availability Of Parts, Accessories, Supplies For The Next 10 Years Or More 10. Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Installation, Testing And Commissioning 11. Bi-annual Preventive Maintenance From The Distributor's Qualified Technician During The Warranty Period 12. Availability Of Trained Service Engineers To Respond, Troubleshoot, And Repair Unit Within 48 Hours Of A Reported Incident Even After The Warranty Period. 13. Bid Price Must Include Value-added Tax Of 12 Percent And Delivery Fee. (1) Homogenizer General Specifications: ● Capable Of Of Mixing, Dispersing, Emulsifying, And Milling ● Mixing Components Should Be Interchangeable Without Any Tools ● Mixing Capacity Range: 1-30 L ● Machine Dimensions: Length - 400 - 500 Mm, Width - 390 - 500 Mm, Height - 1160 - 1260 Mm ● Maximum Weight: 30 Kg ● Motor: 1 Hp Ac ● Power Supply: Single Phase, 220v, 50/60hz ● Speed Range: 0-6000 Rpm ● Motor Height Adjustment: Electrical ● Material: Medical Grade Ss316l Material For All Wetted Parts ● Rotor/stator “v” Design, Double Vortex 65 Mm ● Machine Base: Corrosion Resistant Aluminum Base With Height-adjustable Non-slip Rubber Feet ● Must Have Emergency Stop/ Turn Off Button Inclusions: 1. Explosion Proof Motor, Cable Or Remote Panel Control 2. Vessel Clamp 3. Aluminium H Stand With Electrical Lifting 4. Attachments A. High Flow Mixer 83 Mm B. Rotor Stator Sv 45mm C. Rotor Stator Sv 65mm D. Dispersing Blade 63 Mm E. Vessel Clamp 5. Water Bath Circulator A. Temp Range: 5 To 95 Celsius B. For Both Cooling & Heating C. Hose & Fittings Included D. Able To Monitor Jacket Temperature 6. 1l Ss Jacketed Vessel A. Material Wetted Part Ss316l B. Non-wetted Part Ss304 7. 5l Ss Jacketed Vessel A. Working Capacity 5 Liters B. Tank Flat Top C. Dish Bottom D. Material Wetted Part Ss316l E. Non-wetted Part Ss304 F. Thickness Body 3mm G. Jacket 3mm H. Discharge By Manual Tilting I. Design Temperature 150 Celsius J. Included Pt100 Temp Sensor For Product K. Temp Controller Module 8. 10l Ss Jacketed Vessel A. Working Capacity 10 Liters B. Tank Flat Top C. Dish Bottom D. Material Wetted Part Ss316l E. Non-wetted Part Ss304 F. Thickness Body 3mm G. Jacket 3mm H. Discharge By Manual Tilting I. Design Temperature 150 Celsius J. Included Pt100 Temp Sensor For Product K. Temp Controller Module 9. Piston Type Volumetric Filling Machine With Filling Nozzle A. Suitable For Semi-viscous And Viscous Semi-solids B. Contact Parts Ss316l C. Non-contact Parts Ss304 D. Dosage Capacity Range: 20 Ml To 250 Ml Terms And Conditions: 1. Delivery And Installation Of One-hundred Eighty (180) To Two-hundred Ten (210) Days After Awarding Of Purchase Order (po). 2. With Factory Acceptance Tests (fat) And Site Acceptance Tests (sat), Design Qualification (dq), Installation Qualification (iq), Operational Qualification (oq), And Performance Qualification (pq) Documentation And Tools As Part Of The Bid Price 3. All Parts Of The Equipment And Its Accessories Must Be Identified By Part Number Or Accessory Number 4. Qualified Service Engineers Must Perform Factory Acceptance Tests (fat) And Site Acceptance Tests (sat), Design Qualification (dq), Installation Qualification (iq), Operational Qualification (oq), And Performance Qualification (pq) With Documentation And Reports As Part Of The Bid Price 5. Operations And Service Manual Must Be Provided 6. Standard Operating Procedures (eg. Cleaning, Routine Maintenance, Etc.) If Available 7. Local Training Of At Least 5 End-users With Certificate At The Compounding And Product Development Gmp Compliant Facility At The College Of Pharmacy 8. Warranty, Parts, And Preventive Maintenance For Two (2) Years Or More 9. Certification/guarantee On Availability Of Parts, Accessories, Supplies For The Next 10 Years Or More 10. Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Installation, Testing And Commissioning 11. Bi-annual Preventive Maintenance From The Distributor's Qualified Technician During The Warranty Period 12. Availability Of Trained Service Engineers To Respond, Troubleshoot, And Repair Unit Within 48 Hours Of A Reported Incident Even After The Warranty Period 13. Bid Price Must Include Value-added Tax Of 12 Percent And Delivery Fee (1) Mixer General Specifications Of Mixer: ● Can Mix The Material And The Binder Into A Wet, Soft Mass, Uniformly Cut Into Wet Granules, And Then Dry The Granules ● Must Include A Granulator And Fluid Bed Dryer Attached By A Line Or Sizer ● Must Be Certified By Supplier As Good Manufacturing Practice Model ● Granulator ○ Voltage: 220 V ○ Dimensions: Length - 700 - 1100 Mm, Width - 400 - 600 Mm, Height - 900 - 1300 Mm ○ Container Volume Range: 5-10l ○ Output Range: 2-8 Kg ○ Maximum Speed Range: 800 Rpm ○ Maximum Cutting Speed: 3000 Rpm ○ Power Requirement Range: 3-10 Kw ○ Contact Parts: Ss316l, Non-contact Parts: Ss304 ○ Compressed Air Requirement Range ■ Pressure Range - 0.4 - 0.6 Mpa ■ Air Flow Rate - 0.1 - 0.2 M3/min ○ Must Have Built In Electric Heating System ● Fluid Bed Dryer ○ Voltage: 220 V ○ Dimensions: Length - 900 - 1200 Mm, Width - 700 - 1500 Mm, Height - 1900 - 2200 Mm ○ Container Volume Range: 5-10l ○ Processing Capacity Range: 1.5 - 4.8kg ○ Total Power Requirement Range: 10-20 Kw ○ Contact Parts: Ss316l, Non-contact Parts: Ss304 ○ Compressed Air Requirement Range ■ Pressure Range - 0.4 - 0.8 Mpa ■ Air Flow Rate - 0.1 - 0.3 M3/min ○ Must Be Upgradable To Have Granulation And Spraying/coating Capabilities ○ Must Have Built In Electric Heating System ○ Must Have Explosion Duct Inclusions For Both Mixer And Fluid Bed Dryer: ● Must Have Complete Validation Document Protocols And Reports ● Must Include Equipment Manuals ● Must Have Safety Features Such As, But Not Limited To, Emergency Stop And Safety Interlock Features ● Must Include Programmable Logic Controllers (plcs) And Human Machine Interface (hmi) For Operational Controls ● Must Include Printer For Process Parameters Terms And Conditions: 1. Delivery And Installation Of One-hundred Eighty (180) To Two-hundred Ten (210) Days After Awarding Of Purchase Order (po). 2. Must Include Factory Acceptance Tests (fat) And Site Acceptance Tests (sat), Design Qualification (dq), Installation Qualification (iq), Operational Qualification (oq), And Performance Qualification (pq) Documentation And Tools As Part Of The Bid Price 3. All Parts Of The Equipment And Its Accessories Must Be Identified By Part Number Or Accessory Number 4. Qualified Service Engineers Must Perform Factory Acceptance Tests (fat) And Site Acceptance Tests (sat), Design Qualification (dq), Installation Qualification (iq), Operational Qualification (oq), And Performance Qualification (pq) With Documentation And Reports As Part Of The Bid Price 5. Operations And Service Manual Must Be Provided 6. Standard Operating Procedures (eg. Cleaning, Routine Maintenance, Etc.) If Available 7. Local Training Of At Least 5 End-user With Certificate At The Compounding And Product Development Gmp Compliant Facility At The College Of Pharmacy 8. Warranty, Parts, And Preventive Maintenance For Two (2) Years Or More 9. Certification/guarantee On Availability Of Parts, Accessories, Supplies For The Next 10 Years Or More 10. Warranty Period Shall Commence From The Date Of Acceptance By The End-user After Installation, Testing And Commissioning 11. Bi-annual Preventive Maintenance From The Distributor's Qualified Technician During The Warranty Period 12. Availability Of Trained Service Engineers To Respond, Troubleshoot, And Repair Unit Within 48 Hours Of A Reported Incident Even After The Warranty Period Bid Price Must Include Value-added Tax Of 12 Percent And Delivery Fee

Details: Description 1. 1 Unit - Drone Specifications: Weight: 920 G Max Takeoff Weight: 1,050 G Dimensions: Folded (without Propellers): 221×96.3×90.3 Mm (l×w×h) Unfolded (without Propellers): 347.5×283×107.7 Mm (l×w×h) Diagonal Distance: 380.1 Mm Max Ascent Speed: 6 M/s Max Descent Speed: 6 M/s Max Flight Time: 45 Mins Max Hover Time: 38 Mins Max Flight Distance: 32 Km Gnss Gps+galileo+beidou+glonass Wide Camera Dji Mavic 3t: 1/2-inch Cmos, Effective Pixels: 48 Mp Fov: 84° Format Equivalent: 24 Mm Aperture: F/2.8 Focus: 1 M To ∞ Tele Camera Thermal Camera Thermal Imager Pixel Pitch: 12 Μm Frame Rate: 30 Hz Lens: Dfov: 61° Gimbal Stabilization 3-axis (tilt, Roll, Pan) Video Transmission System Remote Controller: 1080p/30fps Operating Frequency: 2.400-2.4835 Ghz 5.725-5.850 Ghz Max Transmission Distance: Fcc: 15 Km Ce: 8 Km Srrc: 8 Km Mic: 8 Km Max Download Speed: 15 Mb/s Storage High-endurance 128gb V30 Micro Sdxc Battery Capacity: 5000 Mah Standard Voltage :15.4 V Max Charging Voltage: 17.6 Vtype: Lipo 4s Chemical System: Licoo2 Energy: 77 Wh Weight:335.5 G Charging Temperature: 5° To 40° C (41° To 104° F) Charger Input: 100-240 V (ac Power), 50-60 Hz, 2.5 Aoutput Power: 100 W Charging Hub Input: Usb-c: 5-20 V, 5.0 A Output: Battery Port: 12-17.6 V, 8.0 A Rated Power: 100 W Charging Type: Three Batteries Charged In Sequence Charging Temperature Range: 5° To 40° C (41° To 104° F) Rtk Module Dimensions: 50.2×40.2×66.2 Mm (l×w×h) Weight: 24±2 G Interface: Usb-c Power: Approx. 1.2 Wrtk Positioning Accuracy Rtk Fix: Horizontal: 1 Cm + 1 Ppm; Vertical: 1.5 Cm + 1 Ppm Speaker Dimensions: 114.1×82.0×54.7 Mm (l×w×h) Weight: 85±2 G Interface: Usb-c Rated Power: 3 W Max Volume: 110 Db @ 1 M Effective Broadcast Distance: 100 M @ 70 Dbbit Rate: 16 Kbps/32 Kbps Operating Temperature Range: -10° To 40° C (14° To 104° F)two (2) Extra Batteries Hard Caseone (1) Year Warranty Training 2. 2 Sets - Field Operation Laptop With External Display And Printer Specifications: Operating System Windows 11 Microsoft Office Home & Student 2021 Processor Intel® Core™ I5-1335u15.6" Display Screen Ips Lcd 1920x10808gb Ddr4 512gb M.2 Nvme Ssd Intel Iris Xe Network (rj-45) : Yes Hdmi Port: Yes Usb 3.2 Gen 1 Port : 3 Usb 3.2 (type-c) Port : 1 Audio Line Out : Yes Headphone : Yes Laptop Bag Mouse Waterproof Eva Hard Shell Case 16"outer Dimension: 37.5*27*3.6 Cm Inner Dimension: 36*26*1.6cm 55 Inches Smart Led Tv Specifications: Panel Size 55'' Display Ratio 16:9 Maximum Resolution 3840×2160 Brightness (nits) 300cd/m² Contrast 5000:1 Viewing Angle 178°/178° Response Time 8ms Backlight Led Wall-mount 200×200mm Two (2) Years Warranty 3 In 1 Wifi Printer Specifications: Print, Scan, Copy, Fax With Adf Iso Print Speed (black/color) A4 (10 / 5.0 Ipm), Draft Vivid Print Speed (18 / 9.2 Ipm) Page Yield 4,500black / 7,500 Colour Usb 2.0, Wifi, Ethernet Connectivity Compact Integrated Tank Design High Yield Ink Bottles Spill-free, Error-free Refilling Wi-fi, Wi-fi Direct Borderless Printing Up To 4r Ink Type And Code (dye Inks, 003); Interface 1.44 Color Lcd Seamless Setup One (1) Year Warranty 3. 1 Set - 1 Unit Field Operation Laptop Specifications: Operating System Windows 11 Microsoft Office Home & Student 2021 Processor Intel® Core™ I5-1335u 15.6" Display Screen Ips Lcd 1920x1080 8gb Ddr4 512gb M.2 Nvme Ssd Intel Iris Xe Network (rj-45) : Yes Hdmi Port: Yes Usb 3.2 Gen 1 Port : 3 Usb 3.2 (type-c) Port : 1 Audio Line Out : Yes Headphone : Yes Laptop Bag Mouse Waterproof Eva Hard Shell Case 16" Outer Dimension: 37.5*27*3.6 Cm Inner Dimension: 36*26*1.6cm 4. 1 Set - 30 Units Portable Dual Band Radio Uhf/vhf Specifications: Channel Storage: 200 Voltage: 7.4dc Working Temperature: -10c +50 Dimension 126x62x43mm Rf Power: ≥5watts Freq: 136-174mhz, 400-470mhz Memory Channel: 200 Capacity: 2800mah Dual Band Active Noise Cancellation Dual Standby Ip68 Water Proof Type C Charger With Ntc License One (1) Year Warranty 5. 1 Set - 4 Units Poc With Dual Band Analog Specifications: 4g Lte Geo-fencing Dual Sim Card Weight 360g Dimension 156×70×45mm Battery 3100mah Frequency Range Uhf&vhf Channel Capacity 32 X 30 Channel Step 25khz(w) 12.5khz(n) Operating Voltage 7.4v Dc ± 20% Antenna Impedance 50 Ω Output Power: 5w Signal Noise Ratio<-40db Parasitic Harmonic W: ≤65db; N: ≥60db Spurious Emission9khz-1ghz≤-60dbc Audio Response 300hz-3khz: ≤2% Audio Distortion≤5% Sensitivity: -120dbm (20db Sinad) Intermodulation: W: ≥60db; N: ≥55db Adjacent Channel Selectivity: W: ≥60db; N: ≥55db Spurious Rejection: W: ≥60db; N: ≥55db Audio Response: 300hz-3khz: +1~-3db Signal Noise Ratio: W: ≥45db; N: ≥40db Audio Distortion: ≤5% Audio Output Power: 1w One (1) Year Warranty 6. 1 Set - 2 Units Dual Band Base Radio Uhf/vhf Specifications: Power Output: 60 Watts (vhf) | 45 Watts (uhf) Frequency Range: Uhf (400-470mhz) / Vhf (136-174mhz) Memory Channel: 758 Channels Operation Voltage: 13.8vchannel Spacing: 25k (wide). 20k (mid), 12.5k (narrow) Operation Voltage: 13.8v Squelch: Carrier/ctcss/dcs/5 Tone/tone/dtmf Frequency Stability: 2.5ppm Operating Temperature: -20c +60c Dimensions: 139mm X 40mm X 212mmweight: 1.14kg Cross Band Functionality With Ntc License15 Meters Cable With Connectors One (1) Year Warranty 2 Units Base Radio Power Supply Ps-30amp Specifications: Output 9-15v Dc Adjustable Or 13.8v Fixed Output Current: 30a Dimensions (lxwxh): 180x190x65cm Input: 220-230vac One (1) Year Warranty 2 Units Dual Band Antenna Specifications: 144mhz/430mhz (2m/70cm) Length: 5.2m Radial Length: 52cm Weight:2.0kg Gain:8.3db (144mhz) / 11.7db (40mhz) Max. Power Rating:200w Fm(total) Impedance: 50ohms Vswr: Less Than 1.5:1 Rated Wind Velocity:40m/sec. Mast Diameter Accepted: 30mm To 62mm Connector Type: Mj Type: 3x5/8 Wave C-load (144mhz), 8x5/8wave C-load (430mhz) With Ntc License One (1) Year Warranty 15 Meters Rg8 Wire Pure Copper 1 Pl-259 Connector 1 Unit Swr Power Meter Uhf/vhf Specifications: Illuminated Meter Switchable R.m.s. Or Peak Power Measures Forward, Reflected & Vswr Power 6"w X 2"h X 4"d, 2 Lbs. Frequency: 140-525 Mhz Power Ranges: 5/20/200 Connector: So-239 Min. Power Swr Test:: 4w One (1) Year Warranty 7. 1 Set - Early Warning Motor Siren Specifications: An Omnidirectional Siren For Vertical Mounting. Powered By A Single Phase Or Three Phase Motor. Performance Parameter: Sound Rating: 123±2db(a) @1msound Range: 3 Km Radius Electric Motor: 2.2kw, 220/240ac, 50/60hz Ip Rating: Ip44 Output Frequency: 500/560±20hzsingle Tone Net Weight: 50kg Carton Size: 75x63x71cm Complete Set Of Installation Package One (1) Year Warranty Siren Controller Specifications: Size 16"x12"x5.5" 6 Control Buttons Pre-warning Red Alert All Clear Disaster Warning Stop Warning Random Warning Alert And Power Indicator Power Switch Keys Breaker Complete Set Of Installation Package One (1) Year Warranty X-x-x