Bus Tenders

Details: Title: Tragwerksplanung description: Gegenstand Dieses Vertrages Sind Leistungen Des Leistungsbildes Tragwerksplanung Gemäß §§ 49 Ff. Hoai Zur Planung Und Durchführung Der Erweiterung Der Kita In Dockweiler. Ebenso Sind Leistungen Der Bauphysik Nach Dem Leistungsbild Besondere Leistungen 1.2. Der Hoai Wärmeschutz Und Energiebilanzierung, Bauakustik (schallschutz) Und Raumakustik Zu Erbringen. Es Sollen Die Leistungsphasen 1 Bis 9 Des Leistungsbildes Der Anlage 1.2 Nach Hoai Erbracht Werden. Als Zielvorstellungen Des Auftraggebers Zum Zeitpunkt Des Vertragsschlusses (planungs- Und Überwachungsziele Im Sinne Von § 650p Abs. 2 Bgb) Werden – Im Sinne Einer Werkvertraglichen Beschaffenheitsvereinbarung – Folgende Mindestanforderungen Definiert: Für Die Zielvorstellungen Des Auftraggebers Zum Zeitpunkt Des Vertragsschlusses (planungs- Und Überwachungsziele Im Sinne Von § 650p Abs. 2 Bgb) Werden – Im Sinne Einer Werkvertraglichen Beschaffenheitsvereinbarung – Folgende Mindestanforderungen Definiert: Das Raumprogramm Sowie Alle Anforderungen In Rechtlicher Und Technischer Hinsicht Sind Ausführlich In Anlage 10 Zur Auftragsbekanntmachung Beschrieben Und Sind Gegenstand Dieses Aufforderungsschreibens. Der Zweckverband Beabsichtigt Die Kita Dockweiler Für Den Zukünftigen Gesetzesanspruch Der Ganztagsbetreuung Zu Erweitern. Der Anbau Soll In Südwestlicher Ausrichtung Auf Dem Grundstück Der Kita An Den Bestand Anbinden Und Im Ersten Entwurf In Eingeschossiger Und Barrierefreier Bauweise Geplant Werden. Die Angrenzende Bus-haltestelle Befindet Sich Auf Dem Grundstück Der Kita Und Könnte Für Die Erweiterung Reduziert Werden. In Der Leistungsphase 2 Wird Ein Alternativer Entwurf In Zweigeschossiger Bauweise Erwartet, Damit Der Flächenverbrauch Möglichst Gering Ausfällt. Die Vor- Und Nachteile Gegenüber Einer Eingeschossigen Bauweise, Insbesondere Aus Wirtschaftlicher Sicht, Sollen Vom Objektplaner Dargestellt Und Auch In Wirtschaftlicher Hinsicht Vom Tragwerksplaner Bewertet Werden. Das Hauswirtschaftspersonal Soll Über Einen Eigenen Eingang Verfügen, Hier Ist Auch Die Anlieferung Der Nahrungsmittel Einzuplanen. Für Die Löschwasserbereitstellung Ist Das Vorhandene Trinkwassernetz Nicht Ausreichend, So Dass Hier Die Differenz Zum Grundschutz Über Löschwassertanks Hergestellt Werden Muss. Die Letzten Messungen Vom 07-2023 Ergaben Eine Verfügbare Löschwassermenge Von 72 M³/stunde, Gefordert Werden Von Der Brandschutzdienststelle Aber 96 M³/stunde. Das Fehlende Löschwasser Soll Durch Löschwassertanks Sichergestellt Werden, Die Kosten Hierfür Sind Berücksichtigt. Im Rahmen Der Grundlagenermittlung Muss Die Löschwasserbereitstellung Mit Der Zuständigen Behörde Abgestimmt Werden. Die Vorschriften Der Unfallkasse Rlp, Sowie Die Vorgaben Der Brandschutzdienststelle Der Kreisverwaltung Sind Zwingend Zu Beachten. Die Erweiterung Der Kita Soll In Energetischer Hinsicht Als Klimafreundliches Nichtwohngebäude (kfn) Mit Erfüllung Der Anforderungen An Ein Effizienzgebäude 40 Geplant Und Ausgeführt Werden. Weiter Sind Die Regelungen Für Nichtwohngebäude In Trägerschaft Der Öffentlichen Hand Sind Gemäß Gebäudeenergiegesetz (geg) Und Dem Erneuerbare Energien- Wärmegesetz (eewärmeg) Generell Zu Beachten Und Einzuhalten. Die Erweiterung Der Kita Ist In Massiver Bauweise Unter Energetischer Baustoffauswahl Zu Planen. Sofern Eine 2-geschossige Variante Nach Der Vorentwurfsphase Zum Tragen Kommt, Könnte Das Obergeschoss Auch In Holzständerbauweise Umgesetzt Werden. Die Gründung Über Eine Tragende Bodenplatte Ist Zu Bevorzugen. Die Dachkonstruktion Sollte Nach Möglichkeit Als Pultdach Oder Satteldach Mit Schwacher Neigung Gestaltet Werden Und Sich Am Bestandsgebäude Orientieren. Der Erweiterungsbau Soll Sich In Den Bestehenden Gebäudekomplex Einfügen Und Den Gegenwärtigen Kita-betrieb Mit Den Außenspielflächen Berücksichtigen. Eine Multifunktionale Nutzung Der Mensa, Beispielsweise Durch Mobile Trennwände, Ist In Die Planung Mit Einzubeziehen. Der Sommerliche Wärmeschutz Ist Über Außenliegende Verschattungen Einzuhalten. Die Weiteren Anforderungen Ergeben Sich Aus Anlage 10 Zur Auftragsbekanntmachung. Beauftragter Leistungsumfang Ist Nach Näherer Maßgabe Des Vertragsentwurfes Die Erbringung Von Planungsleistungen Der Leistungsphasen 1 Bis 6 Und Die Besonderen Leistungen Der Leistungsphase 8 Die Dem Leistungsbild Tragwerksplanung (§ 51 Hoai In Verbindung Mit Anlage 14 Zu § 51 Abs. 1 Hoai) Zuzuordnen Sind. Daneben Werden Die Leistungen Der Bauphysik Anlage 1.2 Hoai Beauftragt.

Details: Works contract for execution of providing 1.Improvement Estimate for newly proposed 1 no 63 KVA DT nagercoil road near court Eraniel to reduce the overload existing court ss 250 KVA DT in bethelpuram feeder under Eraniel section2.Imp Estimate for 27 nos 7.5m PSC poles into 8m PSC poles for low ground clearance in various locations under chemponvilai section.3.Imp Estimate for newly proposed 25 KVA DT to reduce the overload existing poolancode ss1 /100 KVA under parasery section.4.Imp Estimate for providing 1 no 11 KV single pole AB switch in 11 KV kovilanvilai spurline in IRE # under manavalakurichy section.5.Imp Estimate for providing 1 no 11 KV single pole AB switch near exchange ss 100 KVA in 11 KV colachel feeder under colachel section.6.Imp Estimate for providing 1 no 11 KV single pole AB switch at kottilpadu ss11/100 KVA in 11 KV colachel feeder under colachel section.7.Imp Estimate for providing 1 no 11 KV single pole AB switch near kamaraj salai ss1/100 KVA in 11 KV colachel feeder under colachel section.8.Imp Estimate for providing 1 no 11 KV single pole AB switch at udaiyarvilai ss111 100 KVA in 11 KV colachel feeder under colachel section.9.Imp Estimate for providing 1 no 11 KV single pole AB switch at CMC SS V1 25 KVA in 11 KV colachel feeder at sampilavilai spur line under colachel section.10.Imp Estimate for providing 1 no 11 KV single pole AB switch at sasthankarai ss/ 25 KVA in 11 KV colachel feeder at sasthankarai bus depot spur line under colachel section.11.Imp Estimate for replacement of deteriorated structure in kurumpani ss 11 100 KVA in palapallam feeder under chemponvilai section.12.Imp Estimate for providing 3 nos 11 KV single pole AB switches in various locations 11 KV kadiapattnam feeder spur lines under manavalakurichy section.13.IMP esti for strengthening of aged conductor ACSR 7/2.59 into ACSR 7/4.09 conductor from Alanchi Paravilai SS II 63 KVA to Alanchi SS II 100KVA in 11 KV palapallam feeder under Chemponvilai section.14.IMP estimate for strengthening of aged conductor ACSR 7/2.59 into ACSR 7/4.09 at loc from Alanchi Junction to Alanchi SS 63 Kva DT in 11 KV palapallam feeder of 110/11 KV SS Chemponvilai section.15.IMP esti for strengthening of aged conductor ACSR 7/2.59 into ACSR 7/4.09 conductor from Alanchi Paravilai SS II 63 KVA to Alanchi SS II 100KVA in 11 KV palapallam feeder under Chemponvilai section.16.IMP esti for strengthening of aged conductor ACSR 7/3.35 into ACSR 7/3.35 conductor Kodimunai SS II 100 KVA in 11 KV colachel feeder under colachel section.17.IMP esti for strengthening of aged conductor ACSR 7/3.35 into ACSR 7/3.35 conductor vaniyakudi SS II 100 KVA in 11 KV colachel feeder under colachel section.18.IMP esti for strengthening of aged conductor ACSR 7/3.35 into ACSR 7/3.35 conductor Port SS I 250 KVA in 11 KV colachel feeder under colachel section.19.IMP esti for Newly proposed 25 KVA poochikadu SS in Poochukadu area to avoid over load North nullivilai SS II 63 KVA DT s load and LT length under parasery section.20.IMP esti for Newly proposed 25 KVA DT sasthankarai SS X VI in sasthankarai area and to reduce the Annastatue SS II 100 KVA DT s load and LT Length under colachel section.21.IMP esti for Newly proposed 1nos 25 KVA DT Eraniel subcourt area toaviod overload Eraniel SS II 100 DY s load and LT length under Eraniel section, in Kanyakumari Electricity Distribution Circle.

Details: Description Professional Book And Document Scanner, Camera Resolution: 16 Megapixels Optical Resolution : 250 Dpi Maximum Scanning Size: A3 (420 × 297 Mm) Maximum Document Thickness: 50 Mm Scanning Speed: 1.5 Seconds Per Page Light Source: Led With Adjustable Brightness + Side Lighting Ocr Software: Abbyy Ocr (supports 180+ Languages) Product Dimensions: 362.45 × 351.5 × 149.30 Mm Product Weight: 1.5 Kg Visual Presenter Mode: 1920 × 1080 @ 20 Fps System Compatibility: Windows Xp, 7, 8, 10, 11 (32/64-bit); Macos 10.13+ | File Formats: Jpg, Pdf, Searchable Pdf, Word, Excel, Tiff Compact High-performance Tablet With 8.3-inch Display, 128gb Storage, And Wi-fi Connectivity, Display: 8.3-inch Liquid Retina Display | 2266 × 1488 Pixels At 326 Pixels Per Inch (ppi) Features: Wide Color (p3), True Tone, Fully Laminated With Anti-reflective Coating, And 500 Nits Brightness Chip: A17 Pro, Cpu: 6-core (2 Performance Cores And 4 Efficiency Cores) Gpu: 5-core Neural Engine: 16-core Capacity: 128gb Rear Camera: 12-megapixel Wide Camera With Ƒ/1.8 Aperture, Smart Hdr 4, And 4k Video Recording Up To 60 Fps Front Camera: 12-megapixel Ultra Wide Front Camera With Center Stage, Ƒ/2.4 Aperture, And 1080p Hd Video Recording Up To 60 Fps Wi-fi: Wi-fi 6e (802.11ax) With Simultaneous Dual-band Support, Bluetooth: 5.3 Height: 195.4 Mm | Width: 134.8 Mm | Depth: 6.3 Mm | Weight: 293 Grams Security: Touch Id Integrated Into The Top Button Port: Usb-c For Charging And Accessories 2 Tb Portable External Solid-state Drive, Model: Extreme Portable Ssd V2 Capacity: 2tb Interface: Usb 3.2 Gen 2 Type-c Maximum Read Speed: Up To 1050 Mb/s Maximum Write Speed: Up To 1000 Mb/s Encryption: 256-bit Aes Hardware Encryption Drop Protection: Up To 3 Meters (9.8 Feet) Water & Dust Resistance: Ip65 Rating Dimensions: 3.97 X 2.07 X 0.38 Inches (100.80 X 52.55 X 9.60 Mm) Weight: 0.11 Lb (52 G) Material: Durable Silicone Shell With An Aluminum Chassis Operating Systems: Windows® 10+ And Macos 10.13+ Connectivity: Usb Type-c To Usb Type-c Cable Included Usb Type-c To Usb Type-a Adapter Included Warranty: 5-year Limited Warranty Carabiner Loop: Built-in For Easy Attachment To Bags Or Belts 2 Tb Portable External Hard Disk Drive, Model: Portable Drive (stgx2000400) Capacity: 2tb Interface: Usb 3.0 (compatible With Usb 2.0) Data Transfer Rate: Usb 3.0: Up To 5 Gbps Usb 2.0: Up To 480 Mbps Dimensions: 4.606 Inches (117 Mm) Length X 3.149 Inches (80 Mm) Width X 0.582 Inches (14.8 Mm) Depth Weight: Approximately 0.418 Lbs (0.19 Kg) Operating Systems: Formatted For Windows 10, Windows 8, Windows 7 Plug-and-play: Automatically Recognized By Windows; No Software Installation Required Power Source: Powered Via Usb Connection; No External Power Supply Needed What's Included - Portable Drive - Usb 3.0 Cable - Quick Start Guide 2 Tb Portable External Hard Disk Drive, Model: Portable Drive (hdtb520xk3aa) Capacity: 2tb Interface: Usb 3.2 Gen 1 (compatible With Usb 2.0) Maximum Transfer Rate: Up To 5 Gbit/s (usb 3.2 Gen 1) Dimensions: 109 Mm (l) X 78 Mm (w) X 14 Mm (h) Weight: Approximately 149 G Enclosure: Matte Finish File System: Ntfs (for Windows) One Free Port Of Usb 3.2 Gen 1 Or Usb 2.0 Power Source: Usb Bus Power (max. 900ma) What's Included - Portable Hard Drive - Usb 3.0 Cable (type A To Micro-b) - User's Manual (pre-installed On The Hard Drive) Warranty: 3-year Limited Warranty

Details: Works contract for execution of providing 1.Improvement Estimate for newly proposed 1 no 63 KVA DT nagercoil road near court Eraniel to reduce the overload existing court ss 250 KVA DT in bethelpuram feeder under Eraniel section2.Imp Estimate for 27 nos 7.5m PSC poles into 8m PSC poles for low ground clearance in various locations under chemponvilai section.3.Imp Estimate for newly proposed 25 KVA DT to reduce the overload existing poolancode ss1 /100 KVA under parasery section.4.Imp Estimate for providing 1 no 11 KV single pole AB switch in 11 KV kovilanvilai spurline in IRE # under manavalakurichy section.5.Imp Estimate for providing 1 no 11 KV single pole AB switch near exchange ss 100 KVA in 11 KV colachel feeder under colachel section.6.Imp Estimate for providing 1 no 11 KV single pole AB switch at kottilpadu ss11/100 KVA in 11 KV colachel feeder under colachel section.7.Imp Estimate for providing 1 no 11 KV single pole AB switch near kamaraj salai ss1/100 KVA in 11 KV colachel feeder under colachel section.8.Imp Estimate for providing 1 no 11 KV single pole AB switch at udaiyarvilai ss111 100 KVA in 11 KV colachel feeder under colachel section.9.Imp Estimate for providing 1 no 11 KV single pole AB switch at CMC SS V1 25 KVA in 11 KV colachel feeder at sampilavilai spur line under colachel section.10.Imp Estimate for providing 1 no 11 KV single pole AB switch at sasthankarai ss/ 25 KVA in 11 KV colachel feeder at sasthankarai bus depot spur line under colachel section.11.Imp Estimate for replacement of deteriorated structure in kurumpani ss 11 100 KVA in palapallam feeder under chemponvilai section.12.Imp Estimate for providing 3 nos 11 KV single pole AB switches in various locations 11 KV kadiapattnam feeder spur lines under manavalakurichy section.13.IMP esti for strengthening of aged conductor ACSR 7/2.59 into ACSR 7/4.09 conductor from Alanchi Paravilai SS II 63 KVA to Alanchi SS II 100KVA in 11 KV palapallam feeder under Chemponvilai section.14.IMP estimate for strengthening of aged conductor ACSR 7/2.59 into ACSR 7/4.09 at loc from Alanchi Junction to Alanchi SS 63 Kva DT in 11 KV palapallam feeder of 110/11 KV SS Chemponvilai section.15.IMP esti for strengthening of aged conductor ACSR 7/2.59 into ACSR 7/4.09 conductor from Alanchi Paravilai SS II 63 KVA to Alanchi SS II 100KVA in 11 KV palapallam feeder under Chemponvilai section.16.IMP esti for strengthening of aged conductor ACSR 7/3.35 into ACSR 7/3.35 conductor Kodimunai SS II 100 KVA in 11 KV colachel feeder under colachel section.17.IMP esti for strengthening of aged conductor ACSR 7/3.35 into ACSR 7/3.35 conductor vaniyakudi SS II 100 KVA in 11 KV colachel feeder under colachel section.18.IMP esti for strengthening of aged conductor ACSR 7/3.35 into ACSR 7/3.35 conductor Port SS I 250 KVA in 11 KV colachel feeder under colachel section.19.IMP esti for Newly proposed 25 KVA poochikadu SS in Poochukadu area to avoid over load North nullivilai SS II 63 KVA DT s load and LT length under parasery section.20.IMP esti for Newly proposed 25 KVA DT sasthankarai SS X VI in sasthankarai area and to reduce the Annastatue SS II 100 KVA DT s load and LT Length under colachel section.21.IMP esti for Newly proposed 1nos 25 KVA DT Eraniel subcourt area toaviod overload Eraniel SS II 100 DY s load and LT length under Eraniel section, in Kanyakumari Electricity Distribution Circle.

Details: Nsn 7r-7021-016552573-e8, Tdp Ver 001, Qty 117 Ea, Delivery Fob Origin. The Data Needed To Acquire/repair This Part Competitively Is Not Physically Available, It Cannot Be Obtained Economically, Nor Is It Possibleto Draft Adequate Specifications Or Any Other Adequate, Economical Description Of The Material For A Competitive Solicitation. The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss) Source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/" Interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. The Proposed Contract Action Is For Supplies Or Services For Which The Government Intends To Solicit And Negotiate With Only One Source Under The Authority Of Far 6.302-1. All Responsible Sources May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals, Quotationsor Capability Statements. This Notice Of Intent Is Not A Request Forcompetitive Proposals. However, All Proposals Received Within 45 Days (30days If Award Is Issued Under An Existing Basic Ordering Agreement (boa) Afterdate Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. Award Will Be Made Only If The Offeror, The Product/service, Or The Manufacturer Meets The Qualification Requirement(s) At Time Of Award, In Accordance With Far Clause 52.209-1. The Solicitation Identifies The Office Where Additional Information Can Be Obtained Concerning Qualification Requirements And Is Cited In Each Individual Solicitation. Based Upon Market Research, The Government Is Not Using The Policies Contained In Far Part 12, Acquisition Of Commercial Items, In Its Solicitation For The Described Supplies Or Services. However, Interested Persons May Identify Tothe Contracting Officer Their Interest And Capability To Satisfy Thegovernment's Requirement With A Commercial Item Within 15 Days Of This Notice.

Details: Nsn 7r-4920-015750494-qe, Ref Nr T6551941-1, Qty 1 Ea, Delivery Fob Origin. This Part Requires Engineering Source Approval By The Design Control Activity In Order To Maintain The Quality Of The Part. Existing Unique Design Capability, Engineering Skills, And Manufacturing/repair Knowledge By The Qualified Source(s) Require Acquisition/repair Of The Part From The Approved Source(s). The Approved Source(s) Retain Data Rights,manufacturing/repair Knowledge, Or Technical Data That Are Not Economically Available To The Government, And The Data Or Knowledge Is Essential To Maintaining The Quality Of The Part. An Alternate Source Must Qualify In Accordance With The Design Control Activity's Procedures, As Approved By The Cognizant Government Engineering Activity. The Qualification Procedures Must Be Approved By The Government Engineering Activity Having Jurisdiction Over The Part In The Intended Application. The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss) Source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/" Interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. The Proposed Contract Action Is For Supplies Or Services For Which The Government Intends To Solicit And Negotiate With Only One Source Under The Authority Of Far 6.302-1. All Responsible Sources May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals, Quotationsor Capability Statements. This Notice Of Intent Is Not A Request Forcompetitive Proposals. However, All Proposals Received Within 45 Days (30days If Award Is Issued Under An Existing Basic Ordering Agreement (boa) Afterdate Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. Based Upon Market Research, The Government Is Not Using The Policies Contained In Far Part 12, Acquisition Of Commercial Items, In Its Solicitation For The Described Supplies Or Services. However, Interested Persons May Identify Tothe Contracting Officer Their Interest And Capability To Satisfy Thegovernment's Requirement With A Commercial Item Within 15 Days Of This Notice.

Details: The Department Of Agriculture Regional Field Office Ix, Through Its Bids And Awards Committee (goods And Services), Hereby Invites All Interested Providers To Quote Their Lowest Price, Subject To The Terms And Conditions Stated Herein. Abc: ₱164,997.00 Delivery Period: 30 Calendar Days Delivery Site: Sudlon, Molave, Zamboanga Del Sur Accomplished Rfq's Must Be Received By The Bac Secretariat Of The Procuring Entity At Department Of Agriculture-rso Ix, Zamboanga City Or Through E-mail (bacda9zambo@gmail.com). Late Quotations Shall Not Be Accepted. Submit Certified True Copy Of The Following Valid: · Current Business Permit Or Mayor's Permit (2025); · Philgeps Registration Number; · Original Omnibus Sworn Statement (notarized); · Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Special Power Of Attorney For Authorized Representative 1 2 Set "computer Desktop Set " 49,999.00 "specification/s: " Cpu – At Least 6 Cores 12 Threads, 3.9ghz Base Frequency And Max 4.9ghz,12 Mb Cache, 8 Gt/s Bus Speed Ram – At Least 16gb (2x8gb Dual Channeled) Ddr4 Dram 3200mhz Motherboard – At Least Lga 1200 Pcie 4.0, 32gbps M.2 Slot, Intel® 1 Gb, Ethernet, Hdmi, D-sub Usb 3.2 Gen 1 Type-a, Sata 6 Gbps, Com Header, And Rgb Header Storage – At Least Nv2 1 Tb M.2-2280 Pcie 4.0 X4 Nvme Solid State Drive Cpu Cooler – At Least 4.84""l X 3.03""w X 6.25""h, 12 Volts 2.4 Watts, Maximum 1800 Rpm Power Supply - At Least 750 W Power Supply Monitor – At Least 24” 1920 X 1080p Accessories – Semi-mechanical Keyboard And Mouse "warranty – One (1) Year Warranty " 2 1 Unit "laptop " 49,999.00 "specification/s: " "processor: Intel Core I5 - 1135g7 (11th Generation), 2.4 Ghz (base Clock Speed At 28 W Tdp) Boosting Up To 4.2 Ghz (1-core Boost)" Ram: 16 Gb Ddr4 Storage: 512 Gb Ssd Display: 15.6-inch Full Hd (1920 X 1080) Ips Battery Life: Up To 8 To 10 Hours Build Quality: Durable Materials, Comfortable Keyboard, Responsive Touchpad Ports: Usb 3.2 Gen 1 Type-a Ports Usb 3.2 Gen 2 Type-c Ports Hdmi 4-in-1 Card Reader (sd, Sdhc, Sdxc, Mmc) Headphone/microphone Jack Power Connector With Complete Accessories Weight: At Least 1.8 Kg Operating System: Windows 11, Windows 64-bit/ With Ms Office Warranty: One (1) Year Warranty Accessories: With Bag And Mouse 3 1 Unit "printer " 15,000.00 "specification/s: " Printer Type: Print, Scan And Copy Resolution: At Least Up To 5760 X 1440 Dpi Print Speed: Black: At Least Up To 33 Pages Per Minute Color: At Least Up To 15 Pages Per Minute First-page Print Time: At Least Approx. 10 Seconds (black) / 16 Seconds (color) Copying: Speed: At Least Up To 7.7 Images Per Minute (ipm) For Black And 3.8 Ipm For Color Max Resolution: At Least It Has A 600 X 600 Dpi Scanning: Optical Resolution: At Least It Has A 1200 X 2400 Dpi Flatbed Scan Area: At Least It Has 216 X 297 Mm Adf Capacity: At Least 30 Pages For A4, 10 Pages For Legal Paper Handling: Input: At Least 100 Sheets Of Plain Paper Output: At Least 30 Sheets Connectivity: At Least Usb, Wi-fi, Ethernet, Wi-fi Direct Dimensions: Has A 375 X 347 X 237 Mm Weight: At Least 5.0 Kg Ink Yield: Black: At Least Up To 4,500 Pages Color (cyan, Magenta, Yellow): At Least Up To 7,500 Pages

Details: Description Stainless Welding Rod 1/8 - (jiefang #08) Back Rest Double - (dumptruck #01&02) Hydrauvac Assy. 3/4 - (hino Dumptruck #09) Steel Cable 3/4 X 8 Meter - (dumptruck #01&02) Clamp 3/4 - (dumptruck #01&02) Shockle 1 1/2 - (dumptruck #01&02) Cylinder Head Gasket - (pajero Sht-865) Engine Valve Exhaust & Intake 16 Pcs. - (pajero Sht-865) Valve Guide - (pajero Sht-865) Valve Seal - (pajero Sht-865) Oil Seal 8-18-30 Steering - (pajero Sht-865) Mud Guard 1/4 X 36 X 36 - (dumptruck # 14) Bolts 8mm X 1" W/ Washer & Nuts - (dumptruck #14) Bearing 30211 - (hino Dumptruck #09) Tires 165-65-r13 - (mahindra Eh 3038) Oil Seal Outer - (canter Sfj-778) Oil Seal Inner - (canter Sfj-778) Rubber Cup - (hino Dump Truck #09) Cutting Disc - (bulldozer #01) Sand Paper #120 - (stock) Steel Brush - (stock) Brake Shoe Rear - (canter Sfj-778) Battery Motolite Free Maintenance 9 Plates - (toyota Hi-lux) Filter Dc-110 - (provincial Bus Shh-730) Brake Cable - (jiefang #08) Grinding Stone 4" - (stock) Sand Paper #100 - (stock) Sand Paper #1000 - (stock) Oil Filter Dc-503 - (dumptruck #04) Fuel Filter Fc-319 - (roadgrader #01) Universal Joint - (l-300 Scr-486) Fs-1280 Fleetguard - (roadgrader #05) Lf-3349 Fleetguard- (roadgrafer #05) Brake Cylinder Front Hydraulic Hose Assy, 3/4 X 6" - (payero Sey 514) Belt A-34 - (pajero Sfy-514) Belt 7pk1516 Steel Tube 1/4 - (korando Xcv-302) Oil Filter Dc-306 - (pajero Sht-886) Fitting 1/4 - (korando Xcv-302) Clutch Booster Piston - (prime Mover) Air Filter Inner/ Outer - (road Roller #02) Sliding Upper Guide - (delica Crh-243) Sliding Lower Guide - (delica Crh-243) Sliding Long Guide - (delica Crh-243) 10mm X 35mm Bolt - (sht-865) Hydraulic Hose Assy. 1/4 X 15 - (backhoe #01) Hydraulic Hose Assy. 1/4 X 16 - (backhoe #01) Instruction To Suppliers: Small Valaue Procurement 1. Bidders Must Submit Current And Valid Documentary Legal Requirements Upon Sending The Filed – Out Quotation: A. [ ] Mayor’s / Business Permit; B. [ ] Philgeps Registration Number : _______ Membership : [ ] Platinum [ ] Red; C. [ ] Income / Business Tax Return; D. [ ] Omnibus Sworn Statement; & E. [ ] Pcab License (for Infrastructure) 2. Additional Requirements For Procurement Of Drugs And Medicines As Per Coa Circular 2023-004 Dated June 14, 2023 A. Certificate Of Product Registration From Food And Drug Administration (fda) B. Certificate Of Good Manufacturing Practices From Fda C. Batch Release Certificate From Fda D. If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/dealer Of The Product/items E. License To Operate From Fda With List Of Sources (whether It Is A Manufacturer, Importer, Seller, Or Distributor) F. Delivery Receipt / Prescribing Invoice Bearing Lot Nos. And Expiry Dates Of The Drugs And Medicines 3. Suppliers Who Have Previously Submitted The Above Legal Requirements To The Provincial Procurement Management Division (ppmd) May No Longer Require Its Re – Submission. 4. All Prices Quoted Are Inclusive Of All Applicable Duties, Government Permits, Fees, And Other Charges Relative To The Acquisition And Delivery Of Items To Provincial Government Of Capiz 5. In Case Of Price Discrepancy Over The Amounts In Words And In Figures, The Amount In Words Will Prevail. 6. The End-user Shall Have The Right To Inspect And/or To Test The Goods If The Same In In Accordance With The Technical Specifications. 7. In Case Of Delay In The Delivery, The Supplier Shall Pay A Penalty Of One-tenth Of One Percent (1/10 Of 1%) Of The Corresponding Contract Price For Each Day Of Delay, Including Non-working Days (i.e. Saturday And Sunday), Legal Holidays Or Special Non-working Holidays. 8. Accomplished This Rfq Correctly And Accurately 9. Do Not Alter The Contents Of This Form In Any Way 10. Technical Specifications Are Mandatory. Failure To Comply With Any Of Requirements Will Disqualify Your Quotation 11. Failure To Follow These Instructions Will Disqualify Your Entire Quotation 12. Other Terms And Conditions Shall Be Applied In Accordance With The Irr Of Ra 9184

Details: Nsn 7r-6605-998846459-fx, Tdp Ver 005, Qty 5 Ea, Delivery Fob Origin. The Government Physically Does Not Have In Its Possession Sufficient, Accurate, Or Legible Data To Purchase This Part/contract Repair From Other Than The Current Source(s). The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss) Source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/" Interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. The Proposed Contract Action Is For Supplies Or Services For Which The Government Intends To Solicit And Negotiate With Only One Source Under The Authority Of Far 6.302-1. All Responsible Sources May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals, Quotationsor Capability Statements. This Notice Of Intent Is Not A Request Forcompetitive Proposals. However, All Proposals Received Within 45 Days (30days If Award Is Issued Under An Existing Basic Ordering Agreement (boa) Afterdate Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. Award Will Be Made Only If The Offeror, The Product/service, Or The Manufacturer Meets The Qualification Requirement(s) At Time Of Award, In Accordance With Far Clause 52.209-1. The Solicitation Identifies The Office Where Additional Information Can Be Obtained Concerning Qualification Requirements And Is Cited In Each Individual Solicitation. Based Upon Market Research, The Government Is Not Using The Policies Contained In Far Part 12, Acquisition Of Commercial Items, In Its Solicitation For The Described Supplies Or Services. However, Interested Persons May Identify Tothe Contracting Officer Their Interest And Capability To Satisfy Thegovernment's Requirement With A Commercial Item Within 15 Days Of This Notice.

Details: D4. Scope Of Services D4.1 The Services Required Under This Contract Shall Consist Of Professional Consulting Services In Accordance With The Following Phases Of Work: (a) Preliminary Design Services As Outlined In D5 (b) Detailed Design Services As Outlined In D5.6(a) (i) Design And Specification Development; (ii) Drawing Preparation; (iii) Procurement Process (c) Contract Administration Services As Outlined In D7; (d) Post-construction Services As Outline In D8. D4.1.1 The Services Shall Be In Accordance With The City’s Project Management Manual Http://winnipeg.ca/infrastructure/asset-management-program/templates-manuals.stm#2 And Templates Http://winnipeg.ca/infrastructure/asset-management-program/templates-manuals.stm#4 . Notwithstanding The Foregoing, The Consultant Is Being Engaged By The City For Their Professional Expertise; The Consultant Shall Bring To The Consulting Contract Administrator’s Attention Any Aspect Of The City’s Project Management Manual Or Templates Which The Consultant Is Of The Opinion Is Not Consistent With Good Industry Practice. D4.2 The Following Shall Apply To The Services: (a) Universal Design Policy Http://clkapps.winnipeg.ca/dmis/docext/viewdoc.asp?documenttypeid=2&docid=3604 (b) Should This Project Include A Public Engagement Aspect, It Will Be Required To Meet: Public Engagement Guidelines Https://winnipeg.ca/publicengagement/pdfs/publicengagementrequirements.pdf D4.3 Within The Project Phases In D4, The Consultant May Be Required – Depending Upon Location And Technical Scope Of Services – To Conduct Site Investigation Services, Materials Testing Services, Geotechnical Services, Underground Structures Acquisitions, Pipeline Loading Assessments, Ground-penetrating Radar Inspections, And/or Closed-circuit Television (cctv) Sewer Inspection And Sewer Assessment. D4.3.1 Notwithstanding C11, Fees For Subconsultants Engaged To Perform Services In D4.3 Shall Be Payable As Invoiced By The Subconsultant, Plus An Allowed Handling Fee Of 5%. D4.3.2 Consultant Fees For Supervision Of Subconsultants Required To Perform Any Services In D4.3 Shall Be Included In The Consultant’s Fees. D4.4 The Consultant Will Coordinate Their Activities With (including But Not Limited To): (a) City Of Winnipeg (various Departments And Branches), Including But Not Limited To Public Works Engineering, Parks And Open Spaces, Traffic Signals, Traffic Services, Traffic Management, Street Lighting, Underground Structures, Streets Maintenance, Transportation Planning Division, Transit Department, Planning Property & Development Department, Real Estate, Urban Design, Insurance, Legal Services, And Purchasing; (b) The Water And Waste Department And/or Their Representative(s), For The Renewal Or Abandonment Of The Water Mains, For The Televising And Renewal Or Abandonment Of The Sewer Mains, Water And Sewer Repairs, And New Infrastructure ; (c) Public Information Preparation/coordination During Construction; (d) Identify And Coordinate As Applicable With Development Projects, Events, Festivals; (e) Coordinating With Individual Fronting Businesses And Residences, In Advance Of And During Construction; (f) Coordinate Access With Schools And Daycares Within The Project Limits, Construction Should Occur While School Is Not In Session; (g) The Winnipeg Parking Authority; (h) Winnipeg Transit Regarding The Impact Of The Project On Their Operations And Bus Stops; (i) Any And All Utilities Or Agencies Having Infrastructure In The Project Area, Or That May Be Impacted By The Project; And, (j) City Of Winnipeg Forestry Branch And The Consultant Contract Administrator For Review Of Tree Protection, Removals And Plantings For All Locations. D4.5 The Project Locations/limits And Technical Scope Is Subject To Final Approval Of The Consultant Contract Administrator. D4.5.1 Substitutions And/or Deletions May Occur Within The Consulting Assignment And May Result In An Adjustment In Fees As Per B8. Work Already Completed For Work Identified In The Consulting Assignment Prior To The Notification Of Adjustment In The Consulting Assignment Will Be Paid At Hourly Rates Identified In The Proposal For The Actual Time Completed Prior To Notification. There Will Be No Financial Compensation If There Is A Reduction In The Consulting Assignment. D4.6 Where Applicable, The Following Shall Apply To The Services: (a) City Of Winnipeg’s Accessibility Design Standards (2015) And Universal Design Policy At: Www.winnipeg.ca/ppd/universal_design.stm; (b) The Most Current Edition Of The City Of Winnipeg Standard Construction Specifications City Of Winnipeg Standard Construction Specifications; (c) City Of Winnipeg’s Project Management Manual, Also At Link; (d) Manual For The Production Of Construction Drawings – City Of Winnipeg (november 1984); D4.7 The Consultant Will Be Responsible For Project Reporting And Support To The Consultant Contract Administrator For Project Reporting In Accordance With The City Of Winnipeg’s Project Management Manual And Templates At Http://winnipeg.ca/infrastructure/asset-management-program/templates-manuals.stm#2