Bus Tenders

Details: Nsn 7r-1650-014554490-qe, Tdp Ver 001, Qty 96 Ea, Delivery Fob Origin. This Part Requires Engineering Source Approval By The Design Control Activity In Order To Maintain The Quality Of The Part. Existing Unique Design Capability, Engineering Skills, And Manufacturing/repair Knowledge By The Qualified Source(s) Require Acquisition/repair Of The Part From The Approved Source(s). The Approved Source(s) Retain Data Rights,manufacturing/repair Knowledge, Or Technical Data That Are Not Economically Available To The Government, And The Data Or Knowledge Is Essential To Maintaining The Quality Of The Part. An Alternate Source Must Qualify In Accordance With The Design Control Activity's Procedures, As Approved By The Cognizant Government Engineering Activity. The Qualification Procedures Must Be Approved By The Government Engineering Activity Having Jurisdiction Over The Part In The Intended Application. The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss) Source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/" Interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. The Proposed Contract Action Is For Supplies Or Services For Which The Government Intends To Solicit And Negotiate With Only One Source Under The Authority Of Far 6.302-1. All Responsible Sources May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals, Quotationsor Capability Statements. This Notice Of Intent Is Not A Request Forcompetitive Proposals. However, All Proposals Received Within 45 Days (30days If Award Is Issued Under An Existing Basic Ordering Agreement (boa) Afterdate Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. Award Will Be Made Only If The Offeror, The Product/service, Or The Manufacturer Meets The Qualification Requirement(s) At Time Of Award, In Accordance With Far Clause 52.209-1. The Solicitation Identifies The Office Where Additional Information Can Be Obtained Concerning Qualification Requirements And Is Cited In Each Individual Solicitation. Based Upon Market Research, The Government Is Not Using The Policies Contained In Far Part 12, Acquisition Of Commercial Items, In Its Solicitation For The Described Supplies Or Services. However, Interested Persons May Identify Tothe Contracting Officer Their Interest And Capability To Satisfy Thegovernment's Requirement With A Commercial Item Within 15 Days Of This Notice.

Details: Nsn 7r-5895-013889963-lc, Tdp Ver 004, Qty 15 Ea, Delivery Fob Origin. All Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders, Delivery Orders And Modifications) Related To The Instant Procurement Are Considered To Be "issued" By The Government When Copies Are Either Deposited In The Mail, Transmitted By Facsimile, Or Sent By Other Electronic Commerce Methods, Such As Email. The Government's Acceptance Of The Contractor's Proposal Constitutes Bilateral Agreement To "issue" Contractual Documents As Detailed Herein. Early And Incremental Deliveries Accepted. This Part Requires Engineering Source Approval By The Design Control Activity In Order To Maintain The Quality Of The Part. Existing Unique Design Capability, Engineering Skills, And Manufacturing/repair Knowledge By The Qualified Source(s) Require Acquisition/repair Of The Part From The Approved Source(s). The Approved Source(s) Retain Data Rights,manufacturing/repair Knowledge, Or Technical Data That Are Not Economically Available To The Government, And The Data Or Knowledge Is Essential To Maintaining The Quality Of The Part. An Alternate Source Must Qualify In Accordance With The Design Control Activity's Procedures, As Approved By The Cognizant Government Engineering Activity. The Qualification Procedures Must Be Approved By The Government Engineering Activity Having Jurisdiction Over The Part In The Intended Application. The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss) Source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/" Interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. The Proposed Contract Action Is For Supplies Or Services For Which The Government Intends To Solicit And Negotiate With Only One Source Under The Authority Of Far 6.302-1. All Responsible Sources May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals, Quotationsor Capability Statements. This Notice Of Intent Is Not A Request Forcompetitive Proposals. However, All Proposals Received Within 45 Days (30days If Award Is Issued Under An Existing Basic Ordering Agreement (boa) Afterdate Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. Based Upon Market Research, The Government Is Not Using The Policies Contained In Far Part 12, Acquisition Of Commercial Items, In Its Solicitation For The Described Supplies Or Services. However, Interested Persons May Identify Tothe Contracting Officer Their Interest And Capability To Satisfy Thegovernment's Requirement With A Commercial Item Within 15 Days Of This Notice.

Details: Nsn 7r-1650-014691468-qe, Tdp Ver 001, Qty 110 Ea, Delivery Fob Origin. This Part Requires Engineering Source Approval By The Design Control Activity In Order To Maintain The Quality Of The Part. Existing Unique Design Capability, Engineering Skills, And Manufacturing/repair Knowledge By The Qualified Source(s) Require Acquisition/repair Of The Part From The Approved Source(s). The Approved Source(s) Retain Data Rights,manufacturing/repair Knowledge, Or Technical Data That Are Not Economically Available To The Government, And The Data Or Knowledge Is Essential To Maintaining The Quality Of The Part. An Alternate Source Must Qualify In Accordance With The Design Control Activity's Procedures, As Approved By The Cognizant Government Engineering Activity. The Qualification Procedures Must Be Approved By The Government Engineering Activity Having Jurisdiction Over The Part In The Intended Application. The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss) Source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/" Interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. The Proposed Contract Action Is For Supplies Or Services For Which The Government Intends To Solicit And Negotiate With Only One Source Under The Authority Of Far 6.302-1. All Responsible Sources May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals, Quotationsor Capability Statements. This Notice Of Intent Is Not A Request Forcompetitive Proposals. However, All Proposals Received Within 45 Days (30days If Award Is Issued Under An Existing Basic Ordering Agreement (boa) Afterdate Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. Award Will Be Made Only If The Offeror, The Product/service, Or The Manufacturer Meets The Qualification Requirement(s) At Time Of Award, In Accordance With Far Clause 52.209-1. The Solicitation Identifies The Office Where Additional Information Can Be Obtained Concerning Qualification Requirements And Is Cited In Each Individual Solicitation. Based Upon Market Research, The Government Is Not Using The Policies Contained In Far Part 12, Acquisition Of Commercial Items, In Its Solicitation For The Described Supplies Or Services. However, Interested Persons May Identify Tothe Contracting Officer Their Interest And Capability To Satisfy Thegovernment's Requirement With A Commercial Item Within 15 Days Of This Notice.

Details: The Department Of Agriculture Regional Field Office Ix, Through Its Bids And Awards Committee (goods And Services), Hereby Invites All Interested Providers To Quote Their Lowest Price, Subject To The Terms And Conditions Stated Herein. Abc: ₱138,996.00 Delivery Period: 30 Calendar Days Delivery Site: Zamboanga City Accomplished Rfq's Must Be Received By The Bac Secretariat Of The Procuring Entity At Department Of Agriculture-rso Ix, Zamboanga City Or Through E-mail (bacda9zambo@gmail.com). Late Quotations Shall Not Be Accepted. Submit Certified True Copy Of The Following Valid: · Current Business Permit Or Mayor's Permit (2025); · Philgeps Registration Number; · Original Omnibus Sworn Statement (notarized); · Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Special Power Of Attorney For Authorized Representative 1 2 Unit "cellphone/mobile Phone " 9,999.00 "specification/s: " Cellular: Lte Sim: Nano Sim Screen: 6.55 Inches Ram: 8gb Rom: 128gb - 256gb Back Camera: 64mp Front Camera: 20mp Battery: Li-ion 4250mah Android Version: 11.0 Pie Cpu: Qualcomm 780g Cpu Preferable Color: Black 2 1 Set "computer Desktop Set " 49,999.00 "specification/s: " Cpu – At Least 6 Cores 12 Threads, 3.9ghz Base Frequency And Max 4.9ghz,12 Mb Cache, 8 Gt/s Bus Speed Ram – At Least 16gb (2x8gb Dual Channeled) Ddr4 Dram 3200mhz Motherboard – At Least Lga 1200 Pcie 4.0, 32gbps M.2 Slot, Intel® 1 Gb, Ethernet, Hdmi, D-sub Usb 3.2 Gen 1 Type-a, Sata 6 Gbps, Com Header, And Rgb Header Storage – At Least Nv2 1 Tb M.2-2280 Pcie 4.0 X4 Nvme Solid State Drive Cpu Cooler – At Least 4.84""l X 3.03""w X 6.25""h, 12 Volts 2.4 Watts, Maximum 1800 Rpm Power Supply - At Least 750 W Power Supply Monitor – At Least 24” 1920 X 1080p Accessories – Semi-mechanical Keyboard And Mouse "warranty – One (1) Year Warranty " 3 1 Unit "laptop " 49,999.00 "specification/s: " "processor: Intel Core I5 - 1135g7 (11th Generation), 2.4 Ghz (base Clock Speed At 28 W Tdp) Boosting Up To 4.2 Ghz (1-core Boost)" Ram: 16 Gb Ddr4 Storage: 512 Gb Ssd Display: 15.6-inch Full Hd (1920 X 1080) Ips Battery Life: Up To 8 To 10 Hours Build Quality: Durable Materials, Comfortable Keyboard, Responsive Touchpad Ports: Usb 3.2 Gen 1 Type-a Ports Usb 3.2 Gen 2 Type-c Ports Hdmi 4-in-1 Card Reader (sd, Sdhc, Sdxc, Mmc) Headphone/microphone Jack Power Connector With Complete Accessories Weight: At Least 1.8 Kg Operating System: Windows 11, Windows 64-bit/ With Ms Office Warranty: One (1) Year Warranty Accessories: With Bag And Mouse 4 1 Unit "printer " 15,000.00 "specification/s: " Printer Type: Print, Scan And Copy Resolution: At Least Up To 5760 X 1440 Dpi Print Speed: Black: At Least Up To 33 Pages Per Minute Color: At Least Up To 15 Pages Per Minute First-page Print Time: At Least Approx. 10 Seconds (black) / 16 Seconds (color) Copying: Speed: At Least Up To 7.7 Images Per Minute (ipm) For Black And 3.8 Ipm For Color Max Resolution: At Least It Has A 600 X 600 Dpi Scanning: Optical Resolution: At Least It Has A 1200 X 2400 Dpi Flatbed Scan Area: At Least It Has 216 X 297 Mm Adf Capacity: At Least 30 Pages For A4, 10 Pages For Legal Paper Handling: Input: At Least 100 Sheets Of Plain Paper Output: At Least 30 Sheets Connectivity: At Least Usb, Wi-fi, Ethernet, Wi-fi Direct Dimensions: Has A 375 X 347 X 237 Mm Weight: At Least 5.0 Kg Ink Yield: Black: At Least Up To 4,500 Pages Color (cyan, Magenta, Yellow): At Least Up To 7,500 Pages 5 2 Pc "web Camera " 2,000.00 "specification/s: " Color: Preferably Black Resolution: Preferably 1080p Full Hd Frame Rate: Preferably 30 Fps Field Of View: At Least 60-65 Degrees Microphone: Built-in Mic That Has A Noise Reduction Features. Purpose: For Official Use Integrated Laboratory Division (ild).

Details: Description Invitation To Bid Purchase Of 1 Unit Brand New Dumptruck At Barangay Calumpang, Gsc The Local Government Unit Of Barangay Calumpang, Gsc, Through The Cy 2025 Local Development Fund Intents To Apply The Sum Of Three Million Pesos Only (p3,000,000.00) For The Purchase Of One (1) Unit Brand New Dumptruck At Brgy. Calumpang, Gsc. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Local Government Unit Of Barangay Calumpang, Gsc Now Invites Bids From Eligible Bidders For The Purchase Of One (1) Unit Brand New Dumptruck At Brgy. Calumpang, Gsc, Brgy. Calumpang, Gsc. Delivery Of Goods Required By 60 Calendar Days From The Issuance Of Purchase Order. The Description Of An Eligible Bidder Is Contained In Section Ii Of The Bidding Documents, Itb. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary "pass/fail"criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The "government Procurement Reform Act". Bidding Is Restricted To Filipino Citizen/sole Proprietorship, Partnership, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizen Of The Philippines And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. A Complete Set Of Bidding Documents May Be Purchase By Interested Bidders From The Address Below And Upon Payments Of Non Refundable Fee For The Bidding Documents In The Amount Of Four Thousand Eight Hundred Pesos Only (p4,500.00) To The Barangay Treasurer's Office. The Bidding Shall Be Received Personally By The Bidder Or His Authorized Representative. The Lgu Of Barangay Calumpang, Gsc Will Hold A Pre-bid Conference Open To All Interested Eligible Bidders On January 27, 2025 @ 9:00 Am At The Conference Hall Of Brgy. Calumpang, Gsc. Bids And Eligibility Requirements Must Be Delivered To The Address Below On Or Before February 12, 2024 @ 9:00 Am. All Bids Must Be Accompanied By A Bid Security In The Form Of Cash, Cashier's/manager's Check, Bank Draft / Guarantee Or Irrevocable Letter Or Credit Equivalent To Percent (2%) Of Abc (p60,000.00) Or Surety Bond Callable Upon Demand Equivalent To 5% Of Abc (p150,000.00). Late Bids Shall Not Be Accepted. Bid Opening On February 3, 2025 @ 9:00 Am At The Conference Hall Of Brgy. Calumpang, Gsc. Bids Will Be Open In The Presence Of The Bidder's Representatives Who Choose To Attend The Address Below. Late Bids Shall Not Be Accepted. The Lgu Of Barangay Calumpang, Gsc Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Specifications: 1 Unit Of Brand New Dumptruck Specifications: Vehicle Dimension (mm) Wheelbase – 3,450 Front Overhang – 1,750 Rear Overhang – 1,310 Wheel Track Of Front Axle – 1,750 Wheel Track Of Rear Axle – 1,720 Chassis Length – 6,100 Approach Angle – 28 Departure Angle – 22 Maximum Driving Speed (km/h) – 80 Maximum Grade Ability (%) – 31.33 Minimum Ground Clearance (mm) – 350 Minimum Turning Diameter (m) - <16.5 Fuel Consumption (l/100km) – 25-28 Cargo Body Size – 8 Cbm Overall Dimension – 6,020*2,280*4,750 Weight (kg) Kerb – 6,175 Gross Vehicle Weight – 12,000 Front Axle Loading Capacity – 3,000 Rear Axle Loading Capacity – 9,000 Engine Rated Power (kw/rmp) – 96/2800 Maximum Torque (nm/rmp) – 420/1400-1700 Features – 4-cylinder In-line Displacement – 4.214 Liter Clutch 350 Diaphragm Spring Clutch, Spring Plate Stearing Gear Hydraulically Assisted Wheels & Tires 9.00r20 With 1 Reserve 7.00v-20 Gear Box Wly, 6 Speed Manual Control Brake System Type - Air Brake System Service Brake – Dual Circuit Air Brake Parking Brake – Spring Energy, Compressed Air Operating On Rear Wheels Auxiliary Brake – Exhaust Valve Braking Fuel Tank Capacity – 120 Liters Suspension Steer Axle – Semi-elliptical Leaf Springs With Shock Absorbers & Stabilizer Drive Axle - Semi-elliptical Leaf Springs Frame Material – High Tensile Steel Section – 255 X 70 X (8+5) Mm Flame Widty – 800mm Axles Steer – 1,090n, (3.0t), Forging 1-beam Front Axle Drum Brake Drive – 1,094d2, (9.0t) Electrical System Type – Bus System With Vcd Instrument Voltage – 24v Batteries – 2 X 12v, 105ah Alternator – 28v/55a Starter – 5kw

Details: Nsn 7r-6115-016484473-rq, Tdp Ver 001, Qty 2 Ea, Delivery Fob Origin. All Contractual Documents (i.e. Contracts, Purchase Orders, Task Orders, Delivery Orders And Modifications) Related To The Instant Procurement Are Considered To Be "issued" By The Government When Copies Are Either Deposited In The Mail, Transmitted By Facsimile, Or Sent By Other Electronic Commerce Methods, Such As Email. The Government's Acceptance Of The Contractor's Proposal Constitutes Bilateral Agreement To "issue" Contractual Documents As Detailed Herein. Early And Incremental Deliveries Accepted. This Part Requires Engineering Source Approval By The Design Control Activity In Order To Maintain The Quality Of The Part. Existing Unique Design Capability, Engineering Skills, And Manufacturing/repair Knowledge By The Qualified Source(s) Require Acquisition/repair Of The Part From The Approved Source(s). The Approved Source(s) Retain Data Rights,manufacturing/repair Knowledge, Or Technical Data That Are Not Economically Available To The Government, And The Data Or Knowledge Is Essential To Maintaining The Quality Of The Part. An Alternate Source Must Qualify In Accordance With The Design Control Activity's Procedures, As Approved By The Cognizant Government Engineering Activity. The Qualification Procedures Must Be Approved By The Government Engineering Activity Having Jurisdiction Over The Part In The Intended Application. The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss) Source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/" Interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. The Proposed Contract Action Is For Supplies Or Services For Which The Government Intends To Solicit And Negotiate With Only One Source Under The Authority Of Far 6.302-1. All Responsible Sources May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals, Quotationsor Capability Statements. This Notice Of Intent Is Not A Request Forcompetitive Proposals. However, All Proposals Received Within 45 Days (30days If Award Is Issued Under An Existing Basic Ordering Agreement (boa) Afterdate Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. Based Upon Market Research, The Government Is Not Using The Policies Contained In Far Part 12, Acquisition Of Commercial Items, In Its Solicitation For The Described Supplies Or Services. However, Interested Persons May Identify Tothe Contracting Officer Their Interest And Capability To Satisfy Thegovernment's Requirement With A Commercial Item Within 15 Days Of This Notice.

Details: Description Pr 2024-08-3611 1. 1.1 Unit/s Gravel Bedding 2. 10 Bag/s Cement 3. 1 Cu.m Washed Sand 4. 1 Cu.m 3/4 Screen Gravel 5. 37 Kilo/s 10 Lenghts 10mm Dia. 6m Def. Bar Grade 40 6. 1.52 Kilo/s #126 Galvanized Iron Wire 7. 4 Set/s Stainless Steel Single Slot Lavatory 8. 30 Piece/s 600mm X 600 Ceramic Tiles 9. 4 Sack/s Cement 10. 1 Cu.m Washed Sand 11. 2 Bag/s Tile Grout 12. 2 Bag/s Tile Adhesive 13. 80 Piece/s 4.5mm Fiber Cement Board 14. 240 Piece/s Metal Furring 3m 15. 76 Piece/s Carrying Channel 16. 212 Piece/s Hanger Bars/rod 17. 1267 Piece/s Channel Clip 18. 51 Piece/s Wall Angle 19. 2955 Piece/s Rivets 20. 846 Piece/s 1 Inch Metal Screw 21. 1 Set/s D-1 Double Swing 22. 6 Set/s D-2 Single Swing Door 23. 1 Set/s D-3 Single Sliding Door 24. 1 Set/s W-1 Sliding Window With Mm Thk. Clear Glass 25. 1 Set/s W-2 Sliding Window With Mm Thk. Clear Glass 26. 129 Sq.m 6mm Thk Clear Glass On Powder Coated Aluminum 27. 1 Set/s D-2 Pvc Flush Door On Pvc Jamb With Louver 28. 2 Piece/s Putty Plate 29. 6 Piece/s Paint Roller #6 30. 2 Piece/s Paint Tray 31. 6 Piece/s Paint Brush 32. 16 Gallon/s Acrylic Cast 33. 13 Gallon/s Acrylic Printer 34. 25 Gallon/s Acrylic Semi-gloss Topcoat 35. 7 Gallon/s Acrytex Reducer 36. 1 Roll/s Sand Paper 37. 11 Gallon/s Acrytex Cast 38. 9 Gallon/s Acrytex Primer 39. 3 Set/s Non-sag Epoxy 4l (a&b) 40. 17 Gallon/s Acrytex Flat White 41. 5 Gallon/s Acrytex Reducer 42. 2 Piece/s Putty Plate 43. 2 Piece/s Paint Brush #3 44. 2 Piece/s Paint Brush #1 1/2 45. 2 Piece/s Paint Tray 46. 2 Piece/s Paint Roller #6 47. 2 Piece/s Mini Roller 48. 10 Piece/s Masking Tape 1 Inch 49. 10 Piece/s Mesh Tape 2 Inches 50. 1 Roll/s Assorted Sand Paper 51. 3 Box/es 3.5mm Thhn Stranded Wire (black) 52. 3 Box/es 3.5mm Thhn Stranded Wire (white) 53. 2 Box/es 5.5mm Thhn Stranded Wire (white) 54. 2 Box/es 5.5mm Thhn Stranded Wire (white) 55. 10 Meter/s 8.0mm Thhn Stranded Wire (white) 56. 30 Meter/s 14.0mm Thhn Stranded Wire (white) 57. 11 Set/s Douplex Universal Outlet With Ground, 250v-15a 58. 4 Set/s Acu Outlet 59. 1 Set/s 2-gang, 1-way Flush Type Switch, 250v-10a 60. 8 Set/s 1-gang, 1-way Flush Type Switch, 250v-10a 61. 3 Kilo/s G.i Tie Wire #16 62. 4 Set/s 12watts Led Downlight Lighting Fixtures 63. 8 Set/s 15watts Led Downlight Lighting Fixtures 64. 16 Set/s 2 X 36watts Flourescent Lighting 65. 1 Set/s 10 Branches Panelboard With Ground Bus 66. 3 Set/s 20at/50af, 2p Moided Case Circuit Breaker 67. 4 Set/s 30at/50af, 2p Moided Case Circuit Breaker 68. 1 Set/s 60at/50af, 2p Moided Case Circuit Breaker 69. 18 Piece/s 4.5mm Fiber Cement Board 70. 28 Piece/s Metal Studs 3mm 71. 200 Piece/s 1 Inch Metal Screw 72. 133 Sq.m Aluminum Composite Panel 73. 25 Piece/s Stainless Steel 3d Lettering 20 Inches 74. 2 Piece/s Stainless Steel 3d Logo 36 Inches

Details: Nsn 7r-2915-014545723-qe, Tdp Ver 001, Qty 49 Ea, Delivery Fob Origin. This Part Requires Engineering Source Approval By The Design Control Activity In Order To Maintain The Quality Of The Part. Existing Unique Design Capability, Engineering Skills, And Manufacturing/repair Knowledge By The Qualified Source(s) Require Acquisition/repair Of The Part From The Approved Source(s). The Approved Source(s) Retain Data Rights,manufacturing/repair Knowledge, Or Technical Data That Are Not Economically Available To The Government, And The Data Or Knowledge Is Essential To Maintaining The Quality Of The Part. An Alternate Source Must Qualify In Accordance With The Design Control Activity's Procedures, As Approved By The Cognizant Government Engineering Activity. The Qualification Procedures Must Be Approved By The Government Engineering Activity Having Jurisdiction Over The Part In The Intended Application. The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss) Source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/" Interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. The Proposed Contract Action Is For Supplies Or Services For Which The Government Intends To Solicit And Negotiate With Only One Source Under The Authority Of Far 6.302-1. All Responsible Sources May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals, Quotationsor Capability Statements. This Notice Of Intent Is Not A Request Forcompetitive Proposals. However, All Proposals Received Within 45 Days (30days If Award Is Issued Under An Existing Basic Ordering Agreement (boa) Afterdate Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. Award Will Be Made Only If The Offeror, The Product/service, Or The Manufacturer Meets The Qualification Requirement(s) At Time Of Award, In Accordance With Far Clause 52.209-1. The Solicitation Identifies The Office Where Additional Information Can Be Obtained Concerning Qualification Requirements And Is Cited In Each Individual Solicitation. Based Upon Market Research, The Government Is Not Using The Policies Contained In Far Part 12, Acquisition Of Commercial Items, In Its Solicitation For The Described Supplies Or Services. However, Interested Persons May Identify Tothe Contracting Officer Their Interest And Capability To Satisfy Thegovernment's Requirement With A Commercial Item Within 15 Days Of This Notice.

Details: Nsn 7r-1630-014183177-v2, Tdp Ver 002, Qty 24 Ea, Delivery Fob Origin. This Part Requires Engineering Source Approval By The Design Control Activity In Order To Maintain The Quality Of The Part. Existing Unique Design Capability, Engineering Skills, And Manufacturing/repair Knowledge By The Qualified Source(s) Require Acquisition/repair Of The Part From The Approved Source(s). The Approved Source(s) Retain Data Rights,manufacturing/repair Knowledge, Or Technical Data That Are Not Economically Available To The Government, And The Data Or Knowledge Is Essential To Maintaining The Quality Of The Part. An Alternate Source Must Qualify In Accordance With The Design Control Activity's Procedures, As Approved By The Cognizant Government Engineering Activity. The Qualification Procedures Must Be Approved By The Government Engineering Activity Having Jurisdiction Over The Part In The Intended Application. The Subject Item Requires Government Source Approval Prior To Contract Award, As The Item Is Flight Critical And/or The Technical Data Available Has Not Been Determined Adequate To Support Acquisition Via Full And Open Competition. Only The Source(s) Previously Approved By The Government For This Item Have Been Solicited. The Time Required For Approval Of A New Source Is Normally Such That An Award Cannot Be Delayed Pending Approval Of A New Source. If You Are Not An Approved Source You Must Submit, Together With Your Proposal, The Information Detailed In One Of The Navsup Weapon Systems Support (navsup Wss)source Approval Information Brochures Listed Below. Spares: Https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-sup Port/business-opps/ Repair: Https://www.navsup.navy.mil/navsup-enterprise/navsup -weapon-systems-support/business-opps/ Technical Data Required To Be Submitted Based On Your Company's Experience In Production Of The Same Or Similar Item, Or If This Is An Item You Have Never Made. If Your Request For Source Approval Is Currently Being Evaluated At Navsup Wss Submit With Your Offer A Copy Of The Cover Letter Which Forwarded Your Request For Source Approval. Offers Received Which Fail To Provide All Data Required By The Source Approval Brochure Or Document Previous Submission Of All Data Required By The Source Approval Brochure Will Not Be Considered For Award Under This Solicitation. Please Note, If Evaluation Of A Source Approval Request Submitted Hereunder Cannot Be Processed In Time And/or Approval Requirements Preclude The Ability To Obtain Subject Items In Time To Meet Government Requirements, Award Of The Subject Requirement May Continue Based On Fleet Support Needs. The Navsup Wss Commercial Item Identification Brochure Is Now Available At: "https://www.navsup.navy.mil/navsup-enterprise/navsup-weapon-systems-support/bus Iness-opps/"interested Parties May Obtain Copies Of Military And Federal Specificationsand Standards, Qualified Products Lists (qpls), Qualified Product Databases(qpds), Military Handbooks, And Other Standardized Documents From The Dodsingle Stock Point (dodssp) At Document Automation And Production Service(daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assisthelp Desk At 215-697-2667 Or 215-697-2179 (dsn: 442-2667), Or Mail Their Request To Dladocument Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094.the Proposed Contract Action Is For Supplies Or Services For Which Thegovernment Intends To Solicit And Negotiate With Only One Source Under The Authority Of Far 6.302-1. All Responsible Sources May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals, Quotationsor Capability Statements. This Notice Of Intent Is Not A Request Forcompetitive Proposals. However, All Proposals Received Within 45 Days (30days If Award Is Issued Under An Existing Basic Ordering Agreement (boa) Afterdate Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement.award Will Be Made Only If The Offeror, The Product/service, Or Themanufacturer Meets The Qualification Requirement(s) At Time Of Award, Inaccordance With Far Clause 52.209-1. The Solicitation Identifies The Officewhere Additional Information Can Be Obtained Concerning Qualificationrequirements And Is Cited In Each Individual Solicitation.one Or More Of The Items Under This Acquisition Is Subject To: Free Trade Agreements, If Dfars Clause 252.225-7036 Buy American Act--free Trade Agreements--balance Of Payments Program, Is Included In Thesolicitation. The World Trade Organization Government Procurement Agreement And Free Trade Agreements, If Dfars Clause 252.225-7021 Trade Agreements, Is Included In The Solicitation. "navsup Wss Intends On Awarding Sole Source To On Awarding Sole Source To Non-prime Source(s) And That The Lack Of Response From Any Other Source Will Consider Them To Be Not Interested."

Details: Description 1. Internet Protocol Gateway Nmea 2000® Connector Devicenet Micro – C Nmea 2000® Isolation Opto – Isolated Usb Connector For Usb Type A Ethernet Connector Rj – 45 Operating Voltage 9 To 32 Volts Power Consumption Size: 5.000” X 4.500” X 2.375” Nmea 2000® Standard Level A Fcc And Ce Mark Electromagnetic Compatibility 1 Unit 2. Vessel Data Recorder Data Recorded On Solid State Memory Via Removable Usb Flash Drive Free Data Extraction Software (n2kextractor™) Nmea 2000® Connector Devicenet Micro Usb Connector Usb Type A Ethernet Connecter Rj45 Operating Voltage 9 To 32 Volts Power Consumption Size: 5.000” X 4.500” X 2.375” Nmea 2000® Standard Level A Fcc And Ce Mark Electromagnetic Compatibility 1 Unit 3. Wireless – N Router 2.4ghz/5ghz Wireless – N Router Pre – Configured For Use With Maretron’s N2kview® Up To 300+300mbps Wireless Speeds Four Internal Antennas Supports Wpa/wpa2 Wireless Security Four 10/100 Ethernet Ports For Wired Connections 1 Unit 4. Livescope With Lvs34 Transducer Transducer Beamwidth: 20° To 135° Transducer Cable Length: 20ft Transducer Number Of Pins: 21 Water Rating: Ipx7 Weight: Gls 10 Sonar Black Box: 2.0kg Lv32 Transducer: 0.9kg Power Input: 10 -32 V Power Usage: 21w Typical, 58w Max Frequency: 530 – 1,100khz Transmit Power: 500w Maximum Depth: Down And Forward: 61.0m 1 Unit 1. Gps Antenna/receiver Gps 200-1, Gps & Glonass <3m (autonomous), 2.5m (waas) Position Accuracy 99 Channels, -161dbm Tacking Sensitivity 10hz Position And Speed Update Rate 1hz Time Update Rate Waas Satellite Based Augmentation System Lithium Battery Backup Accept Data Cards: 2 Microsd Cards 9 – 32v Operating Voltage <150ma Power Consumption 4” (diameter) X 1.65” (height), 6oz Level A Nmea 2000® Tested To Iec 60945 Fcc And Ce Mark: Electromagnetic Compatibility 1 Unit 2. Solid – State Rate / Gyro Compass W/o Cables Ssc300 – 01 Solid State Rate / Gyro Compass <0.7deg Rms Static Heading Accuracy 0.1deg Heading Display Resolution 20hz Heading Update Rate 10hz Pitch And Roll Update Rate 9 – 16v Operating Voltage <50ma Power Consumption 4.46” X 3.23” 2.14 Lwh, 7oz. Level A Nmea 2000® Ec61162 – 3, Iec 60945 Fcc And Ce Mark: Electromagnetic Compatibility 1 Unit 3. Direct Current Monitor Dc Monitor W/ 200 Amp Current Transducer Dcm100 Battery Harness With Fuse Lemhta200 – S 200 Amp Current Transducer With Cable 0 – 50 Vdc Battery Sense Voltage Range ±100 Mv Battery Sense Voltage Accuracy 9 – 32v Operating Voltage, Nmea / Battery Interface 70ma Battery Interface, 50ma Nmea 2000® Connection 3.50” X 4.20” X 2.03” Lwg, 13oz 1 Unit 4. Nmea 2000® / Usb Gateway Nmea 2000® Connected Devicenet Micro – C Nmea 2000® / Usb Isolation Opto – Isolated Usb Connector Usb Type B Operating Voltage 9 To 32 Volts Power Consumption <50ma Size: 3.11” X 3.46” X 1.38” (79mm X 88mm X 35mm) 1 Unit 5. 0183 To N2k Gateway W/ Pc Interface, Usb Supply Voltage (nmea 200 Port) 9 To 30v Dc Supply Current (nmea 2000 Port) 62ma @9v Dc Nmea 2000 Port (ngx – 1 – Iso / Ngx – 1 – Usb), 250kbps, M12 Male Nmea 2000 Port To Usb Port Galvanic Isolation Nmea 2000 Nmea 2000 Certified 1 Unit 6. 8” Vessel Monitoring And Control Touchscreen Includes The N2kview® Software 8” Tft Lcd Panel, Led Backlit Widescreen Aspect Ratio 5:3 1350 Nits Brightness (optically Bonded) Solid State Disk Drive, Fanless Cooling System Dual Can Bus For Single Or Redundant Nmea 2000® Network Connections Iec 60945, Nmea 2000® 1 Unit