Bureau Of Fisheries And Aquatic Resources Rv Tender

Description Invitation To Bid The Bureau Of Fisheries And Aquatic Resources Region 5 (bfar 5), Through The Government Of The Philippines (gop), For Cy 2024 Intends To Apply The Sum Of One Million Pesos (php1,000,000.00) Only, Being The Approved Budget For The Contract To Be Bid (abc) To Payment Under The Contract On The Supply, Delivery And Installation Of 1 Unit Hdpe Milkfish Broodstock Cage With Broodstock Net, Cover Net, Egg Collector, And Basic Mooring At Libon Multi-species Hatchery, Pantao, Libon, Albay. Details Are As Follows: Quantity Unit Item Description Unit Cost Total Cost 1 Supply, Delivery And Installation Of 1 Unit Hdpe Milkfish Broodstock Cage With Broodstock Net, Cover Net, Egg Collector, And Basic Mooring At Libon Multi-species Hatchery, Pantao, Libon, Albay 1,000,000.00 1,000,000.00 Specifications: A. Hdpe Fish Cage Frame 1. Size: 10-11 Meter Inside Diameter Size, Completely No Wood Design. 2. Inner And Outer Floater Pipe: Size 250 Mm (10”) Sdr17, 14.8 Mm Thickness, With Expanded Polystyrene Inserts, Must Be 10 Meter Pipe Length Per Piece To Minimize Pipe Connections. 3. Stopper: Four (4) Pcs Per Stanchion, Must Be Welded Not Fused Using An Extrusion Machine Using The Same Hdpe Material. No Metal Screw Of Any Kind. 4. Stanchion: 16 Pcs, 80 Cm Height, Size 125 Mm (5") Sdr11, 12.4 Mm Thickness. 5. Handrail: 110 Mm (4”) Drs11, 10 Mm Thickness, Must Be 10 Meter Pipe Length Per Piece To Minimize Pipe Connections. 6. Brackets: 16 Pcs, 250 Mm Injection Moulded 7. Walkway: 64 Pcs Hdpe Non-skid Walkway, Size 41 Cm X 43 Cm, Color Orange. B. Breeder Net 1. Two (2) Set, 400/15 Ply, Size 10k, Knotted Pe, Square Mesh, 10-11 Meter Diameter X 4 Meter Depth, Net Rope Frame Size #12 And #7 C. Cover Net 1. Two (2) Set, 400/12 Ply, Size 10k, Knotted Pe, 10-11 Meter Diameter, Net Rope Frame #14 D. Concrete Net Weight 1. 16 Pcs, 3 To 5 Kilos Approximate Weight Milkfish Egg Colector *1 Unit *stainless Steel Shaft, Stainless Steel Egg Sweeper In Plug And Play Bearing Design, Easy To Assemble And Dismantle, Sweeper Edge Must Have A Rubber Pad For A Smooth And Clean Swipe On The Cage End. A. G.i. Pipe Trusses Frame A1 G.i. Steel Trusses: 1" A2 Stainless Steel Shaft Rotator: 1 1/4 A3 G.i. Catwalk Frame: 1 1/2" With Hdpe Non-skid Walkway 41cm X 43 Cm A4 G.i. Stanchion: 1" A5 G.i. Trusses Support: 3/4" B. Shaft Rotator B1 G.i. Rotating Lever: 1 1/4" B2 G.i. Shafting Assembly: 1 1/2" B3 Stainless Steel Lock Bolt: 10mm B4 G.i. Shafting Housing Assembly: 3" C. Egg Sweeper Frame: Stainless Steel 1 1/4" Tubular, Adjustable (see Attached Plan For The Dimension) (5m X 1 Meter, 5.20mm) 1-2 Shaft Frame Connection Upper And Lower Corner C3 Rubber Pad Connection D. Egg Ollector D1 Fine Mesh Net D2 Alaskin Cloth Net D3-4 Stainless Ring With Clip D5 Sweeper Frame E. Sweeper Post Assembly (hdpe) (80 Cm Stanchion Height) E.1-2 Inner & Outer Tube: Hdpe 250mm 10", Sdr17 E3 Bracket: Injection Molded 250mm E4 Tee Joint 110mm X 125mm 4", Handrail Hdpe 110mm (4") Sdr11 E5 Catwalk Base With Lock E6 Catwalk Post Assembly Hdpe Pipe 125mm Sdr11 F. Sweeper Support Assembly F1 Support Pipe Attached To Upper Frame: G.i. 1" G. Mooring Line System G.1. 24 Pcs Concrete Anchor 0.5 M X 0.5 M X 0.5 M With Tire Ring G.2. 28 Mm Pp Rope Mooring Line Conditions: 1. To Be Delivered And Installed Within Thirty (30) Calendar Days Upon Receipt Of The Notice To Proceed By The Supplier At Libon Hatchery In Pantao, Libon, Albay. 2. All Materials Must Be New And In Good Condition. 3. 10-year Product Warranty On All Supplied Fish Cage Parts And Accessories, Excluding Nets And Mooring. 4. Must Have Dost Or Any Government Entity Certification That The Hdpe Plastic Tensile Strength (must Be Zero Failed On The Test Result Criteria Of Complete Break, Partial Break And Non-break). Fish Cage Brackets Material Composition (test Result Must Reveal The Presence Of Polyethylene). 5. The Supplier Must Supervise And Transfer The Technology Of Fabrication & Installation During The Training Proper. 6. Fish Cage Must Be Installed Including Its Mooring System After The Training Proper. 7. There Must Be Enough Manpower During The Installation On-site. 8. Complete Bid. The Bfar 5 Now Invites Bids For Above Goods. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183 And Subject To Commonwealth Act 138. Interested Bidders May Obtain Further Information At The Office Of The Bac Secretariat, Bfar 5, Fabrica, Bula, Camarines Sur. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders Until 1:00 O’clock In The Afternoon (official Time At The Office Of The Bac Secretariat) Of November 11, 2024 At The Office Of The Bac Secretariat, Bfar 5, Fabrica, Bula, Camarines Sur Upon Payment Of A Non-refundable Fee For The Bidding Documents In The Amount Of One Thousand Pesos (php1,000.00) Only. Pre-bid Conference Will Be Conducted On October 28, 2024 At 1:00 O’clock In The Afternoon At The Office Of The Bac Secretariat, Bfar 5, Fabrica, Bula, Camarines Sur. Only Those Bidders Who Purchased The Bidding Documents Can Participate The Pre-bid Conference. Bids Must Be Delivered/submitted At The Office Of The Bac Secretariat, Bfar 5, Fabrica, Bula, Camarines Sur On Or Before 1:00 O’clock In The Afternoon (official Time At The Office Of The Bac Secretariat) On November 11, 2024. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Based On The Current Procuring Entity’s Capability, Online Or Electronic Submission And Receipt Of Bids Will Not Be Allowed. Bid Opening Shall Be At 1:00 O’clock In The Afternoon Of November 11, 2024 At The Office Of The Bac Secretariat, Bfar 5, Fabrica, Bula, Camarines Sur. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Bidding. Late Bids Shall Not Be Accepted. The Bfar 5 Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Feel Free To Contact The Personnel Below. Aries C. Tang Head, Bac Secretariat Office Of The Bac Secretariat Bureau Of Fisheries And Aquatic Resources Region 5 Fabrica, Bula, Camarines Sur Cellphone #: 09161135185 Joelle M. Benavidez Bac Chairman