Building Construction Tenders

Details: Description Republic Of The Philippines Department Of Public Works And Highways Bohol 3rd District Engineering Office Guindulman, Bohol, Regional Office Vii Invitation To Bid December 2, 2024 1. The Department Of Public Works And Highways – Bohol 3rd District Engineering Office, Through Its Bids And Awards Committee (bac), Invites Contractors To Submit Bids For The Following Contracts: Name Of Contract : Convergence And Special Support Program - Sustainable Infrastructure Projects Alleviating Gaps (sipag) - Access Roads And/or Bridges From The National Road/s Leading To Major/ Strategic Public Buildings/ Facilities - Construction Of Road, Barangay Calunasan Norte To Barangay Oy, Loboc, Bohol Contract Id No. : 25hb0088 Location : Loboc, Bohol Scope Of Works : Construction Of Concrete Road Approved Budget For The Contract : Php 98,000,000.00 Contract Duration : 244 C.d. Source Of Fund : Gaa Fy 2025 1. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of Small B For C & D; B For Medium A The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. 2. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 4. Interested Bidders May Obtain Further Information From The Dpwh Bohol 3rd District Engineering Office, And Inspect The Bidding Documents At Sawang, Guindulman, Bohol During Weekdays From 8:00am-5:00pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 4 To December 23, 2024 For Contract Ids No. 25hb0086 To 25hb0098 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. 6. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 7. The Dpwh Bohol 3rd District Engineering Office Will Hold A Pre-bid Conference On December 11, 2024 At 10:30am At The Bac Conference Room Bohol 3rd District Engineering Office, Which Shall Be Open To Prospective Bidders. 8. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bidding Documents. 9. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_bohol3@dpwh.gov.ph For Electronic Submission On Or Before December 23, 2024 12:00pm. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 10. Bid Opening For Contract Ids No. 25hb0086 To 25hb0098 Shall Be On December 23,2024 2:00pm At Bac Conference Room Bohol 3rd District Engineering Office. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 11. The Dpwh Bohol 3rd District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. Bidders Shall Pay The Bac An Applicable Fee Of Php50,000.00 For Contract Ids No. 25hb0086, 25hb0088, 25hb0091, Php25,000.00 For Contract Ids No. 25hb0089, 25hb0092, 25hb0093, 25hb0094, 25hb0095, 25hb0096, 25hb0098; Php10,000.00 For Contract Ids No. 25hb0087, 25hb00090 & 25hb0097 For The Bidding Documents, Upon Securing Hard Copies Of The Documents. Bidders That Downloaded The Documents From The Dpwh/philgeps Website Shall Pay The Fee Upon Submission Of Their Bids. Any Request For Additional Information Concerning This Bidding Shall Be Directed To The Following: Bac Chairperson : Juanito A. Olaño Bac Secretariat Head : Marcela B. Dalen Address : Dpwh Bohol Iii Deo Address : Dpwh Bohol Iii Deo Guindulman, Bohol Guindulman, Bohol Telephone No. : 038-411-5027 Telephone No. : 038-411-5027 Email Address : Dpwh_bohol3rd@yahoo.com.ph Email Address :dpwh_bohol3rd@yahoo.com.ph Approved By: Juanito A. Olaño Bac Chairperson

Details: Description Indicative Invitation To Bid Early Procurement Activities (epa) 1. The Department Of Public Works And Highways (dpwh) Cavite 3rd Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: 3. Name Of Contract : Convergence And Special Support Program - Sustainable Infrastructure Projects Alleviating Gaps (sipag) - Access Roads And/or Bridges From The National Road/s Leading To Major/ Strategic Public Buildings/ Facilities - Construction Of Road Connecting Barangay Lumil And Barangay Cabangaan, Silang, Cavite Contract Id No. : 25dq0056 Contract Location : Silang, Cavite Scope Of Works : Construction Of Concrete Road And Construction Of Road Slope Protection Structure Indicative-approved Budget For The Contract : Php 48,999,919.60 Net Length : 200.00 L.m. Source Of Funds : Regular Infra Fy 2025 Contract Duration : 255 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : Php 25,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category And Classification As Indicated On The Above Table. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 8:00 Am To 5:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 4. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways (dpwh) Cavite 3rd District Engineering Office, And Inspect The Bidding Documents At The Address Given Below During Weekdays From 8am – 5pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 11, 2024 – January 03, 2024 @ 8am-5pm From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents (amount Indicated On The Above Table). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Public Works And Highways (dpwh) Cavite 3rd District Engineering Office, Will Hold A Pre-bid Conference On December 19, 2024 @ 9:00 A.m. At 2nd Floor Bidding Room, Dpwh, Cavite 3rd Deo, Phase 7 Carmona Estates, Brgy. Lantic, Carmona City, Cavite, And Through Video Conferencing Via Zoom And Live-streamed On Youtube Https://www.youtube.com/channel/ucslhgizplwhwv3noujroi4g Which Shall Be Opened To Prospective Bidders. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_cavite3@dpwh.gov.ph For Electronic Submission On Or Before January 03, 2024 @ 9:00 A.m. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On January 03, 2024 @ 9:00 A.m. At 2nd Floor Bidding Room, Dpwh, Cavite 3rd Deo, Phase 7 Carmona Estates, Brgy. Lantic, Carmona City, Cavite. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below Or Through Video Conferencing Via Zoom And Live-streamed On Youtube Https://www.youtube.com/channel/ucslhgizplwhwv3noujroi4g. Late Bids Shall Not Be Accepted. 10. If At The Time Of The Post – Qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b) (ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject To Be Bid. 11. The Department Of Public Works And Highways (dpwh), Cavite 3rd District Engineering Office, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Reimart Regin P. Bautista Bac Chairperson Chief, Planning And Design Section Email Address: C3deo.procurement@gmail.com Ramil L. Juliano Bac Secretariat Head Procurement Unit Email Address: C3deo.procurement@gmail.com Department Of Public Works And Highways Cavite 3rd District Engineering Office Phase 7 Carmona Estates, Brgy. Lantic, Carmona City, Cavite 13. You May Visit The Following Websites: For Downloading Of Bidding Documents At Www.dpwh.gov.ph; Philgeps.gov.ph For Online Bid Submission At Electronicbids_cavite3@dpwh.gov.ph December 11, 2024 Approved By: Reimart Regin P. Bautista Chief, Planning And Design Section Bac Chairperson

Details: Description Indicative Invitation To Bid Early Procurement Activities (epa) 1. The Department Of Public Works And Highways (dpwh) Cavite 3rd Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: 7. Name Of Contract : Convergence And Special Support Program - Sustainable Infrastructure Projects Alleviating Gaps (sipag) - Access Roads And/or Bridges From The National Road/s Leading To Major/ Strategic Public Buildings/ Facilities - Construction Of Road, Phase 10, Barangay Paliparan Iii-barangay Paliparan Ii , Dasmariñas City, Cavite Contract Id No. : 25dq0060 Contract Location : Dasmariñas City, Cavite Scope Of Works : Construction Of Concrete Road And Construction Of Road Slope Protection Structure Indicative-approved Budget For The Contract : Php 144,749,951.36 Net Length : 605.00 L.m. Source Of Funds : Regular Infra Fy 2025 Contract Duration : 300 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : Php 50,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category And Classification As Indicated On The Above Table. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 8:00 Am To 5:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 4. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways (dpwh) Cavite 3rd District Engineering Office, And Inspect The Bidding Documents At The Address Given Below During Weekdays From 8am – 5pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 11, 2024 – January 03, 2024 @ 8am-5pm From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents (amount Indicated On The Above Table). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Public Works And Highways (dpwh) Cavite 3rd District Engineering Office, Will Hold A Pre-bid Conference On December 19, 2024 @ 9:00 A.m. At 2nd Floor Bidding Room, Dpwh, Cavite 3rd Deo, Phase 7 Carmona Estates, Brgy. Lantic, Carmona City, Cavite, And Through Video Conferencing Via Zoom And Live-streamed On Youtube Https://www.youtube.com/channel/ucslhgizplwhwv3noujroi4g Which Shall Be Opened To Prospective Bidders. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_cavite3@dpwh.gov.ph For Electronic Submission On Or Before January 03, 2024 @ 9:00 A.m. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On January 03, 2024 @ 9:00 A.m. At 2nd Floor Bidding Room, Dpwh, Cavite 3rd Deo, Phase 7 Carmona Estates, Brgy. Lantic, Carmona City, Cavite. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below Or Through Video Conferencing Via Zoom And Live-streamed On Youtube Https://www.youtube.com/channel/ucslhgizplwhwv3noujroi4g. Late Bids Shall Not Be Accepted. 10. If At The Time Of The Post – Qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b) (ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject To Be Bid. 11. The Department Of Public Works And Highways (dpwh), Cavite 3rd District Engineering Office, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Reimart Regin P. Bautista Bac Chairperson Chief, Planning And Design Section Email Address: C3deo.procurement@gmail.com Ramil L. Juliano Bac Secretariat Head Procurement Unit Email Address: C3deo.procurement@gmail.com Department Of Public Works And Highways Cavite 3rd District Engineering Office Phase 7 Carmona Estates, Brgy. Lantic, Carmona City, Cavite 13. You May Visit The Following Websites: For Downloading Of Bidding Documents At Www.dpwh.gov.ph; Philgeps.gov.ph For Online Bid Submission At Electronicbids_cavite3@dpwh.gov.ph December 11, 2024 Approved By: Reimart Regin P. Bautista Chief, Planning And Design Section Bac Chairperson

Details: Description Indicative Invitation To Bid Early Procurement Activities (epa) 1. The Department Of Public Works And Highways (dpwh) Cavite 3rd Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: 5. Name Of Contract : Convergence And Special Support Program - Sustainable Infrastructure Projects Alleviating Gaps (sipag) - Access Roads And/or Bridges From The National Road/s Leading To Major/ Strategic Public Buildings/ Facilities - Construction Of Road Leading To The New Carmona City Hall, Carmona City, Cavite Contract Id No. : 25dq0058 Contract Location : Carmona City, Cavite Scope Of Works : Construction Of Concrete Road Indicative-approved Budget For The Contract : Php 92,350,429.24 Net Length : 1,138.172 L.m. Source Of Funds : Regular Infra Fy 2025 Contract Duration : 240 C.d. Size Range : Medium A License Category : B Cost Of Bidding Documents : Php 50,000.00 Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category And Classification As Indicated On The Above Table. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 8:00 Am To 5:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 4. Interested Bidders May Obtain Further Information From The Department Of Public Works And Highways (dpwh) Cavite 3rd District Engineering Office, And Inspect The Bidding Documents At The Address Given Below During Weekdays From 8am – 5pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 11, 2024 – January 03, 2024 @ 8am-5pm From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents (amount Indicated On The Above Table). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 6. The Department Of Public Works And Highways (dpwh) Cavite 3rd District Engineering Office, Will Hold A Pre-bid Conference On December 19, 2024 @ 9:00 A.m. At 2nd Floor Bidding Room, Dpwh, Cavite 3rd Deo, Phase 7 Carmona Estates, Brgy. Lantic, Carmona City, Cavite, And Through Video Conferencing Via Zoom And Live-streamed On Youtube Https://www.youtube.com/channel/ucslhgizplwhwv3noujroi4g Which Shall Be Opened To Prospective Bidders. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_cavite3@dpwh.gov.ph For Electronic Submission On Or Before January 03, 2024 @ 9:00 A.m. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 9. Bid Opening Shall Be On January 03, 2024 @ 9:00 A.m. At 2nd Floor Bidding Room, Dpwh, Cavite 3rd Deo, Phase 7 Carmona Estates, Brgy. Lantic, Carmona City, Cavite. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below Or Through Video Conferencing Via Zoom And Live-streamed On Youtube Https://www.youtube.com/channel/ucslhgizplwhwv3noujroi4g. Late Bids Shall Not Be Accepted. 10. If At The Time Of The Post – Qualification Procedure, The Bac Verifies That Any Of The Deficiencies Is Due To The Contractor’s Fault Or Negligence Pursuant To 34.3(b) (ii) Of The 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Rirr Of Ra 9184), The Procuring Entity Shall Disqualify The Contractor From The Award Without Any Right To Reimburse Fees And Incidental Cost Paid For The Procurement Of Infrastructure Contract Subject To Be Bid. 11. The Department Of Public Works And Highways (dpwh), Cavite 3rd District Engineering Office, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Reimart Regin P. Bautista Bac Chairperson Chief, Planning And Design Section Email Address: C3deo.procurement@gmail.com Ramil L. Juliano Bac Secretariat Head Procurement Unit Email Address: C3deo.procurement@gmail.com Department Of Public Works And Highways Cavite 3rd District Engineering Office Phase 7 Carmona Estates, Brgy. Lantic, Carmona City, Cavite 13. You May Visit The Following Websites: For Downloading Of Bidding Documents At Www.dpwh.gov.ph; Philgeps.gov.ph For Online Bid Submission At Electronicbids_cavite3@dpwh.gov.ph December 11, 2024 Approved By: Reimart Regin P. Bautista Chief, Planning And Design Section Bac Chairperson

Details: Description Invitation To Bid 1. The Dpwh-isabela 1st District Engineering Office, City Of Ilagan, Isabela, Through The Dpwh General Appropriations Act 2025 (epa – Early Procurement Activity) Intends To Apply The Sum Stated Below Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Following Projects. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh-isabela 1st District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Contract Id: 25be0034 Contract Name: Convergence And Special Support Program – Sustainable Infrastructure Projects Alleviating Gaps (sipag) - Access Roads And/or Bridges From The National Road/s Leading To Major / Strategic Public Buildings/ Facilities – Construction Of Concrete Road Along Lingaling-calamagui West Road, Santa Maria, Isabela Contract Location: Santa Maria, Isabela Brief Description: Road Concreting: L=2.515 Km (5.030 Lane Km), W=5.00m, Thk=0.23m Metal Guardrail (metal Beam) Including Post , Single, W-beam W/ Metal Beam End Piece, Bull Nose=115.00 Ln.m. Approved Budget For The Contract (abc) = Php24,500,000.00 Contract Duration: 117 Calendar Days Cost Of Bidding Documents: Php25,000.00 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D And Bfor License Classification Small B To Medium A. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contract Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Gppb Resolution No. 15 – 2021 States, “lifting The Suspension On The Implementation Of The Mandatory Submission Of Philgeps Certificate Of Platinum Registration And Membership In Competitive Bidding And Limited Source Bidding; Amending Sections 8.5.2, 23.1 (a)(ii), 23.3, 24.1 (a)(ii), 24.4.3, 34.3 And 54.6 Of The 2016 Revised Irr Of Ra No. 9184, Items Iv (g)(1) And V (d)(1)(b) As Well As Appendix “a” Of Annex “h” Thereof, Items 4 And 6 Of The Guidelines For The Use Of The Government Of The Philippines – Official Merchants Registry, And Item 1 Of Section Viii And Ix Of The 6th Edition Of The Philippine Bidding Documents For Goods And Infrastructure Projects”, Dated October 14, 2021. In Lieu Of The Above, Prospective Bidders Shall Submit In Their Bid The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184). 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From Dpwh-isabela 1st District Engineering Office And Inspect The Bidding Documents At The Dpwh-isabela 1st District Engineering Office, Procurement Unit/bac Office, City Of Ilagan, Isabela During Weekdays From 8:00 Am To 5:00 Pm. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 16, 2024 To January 7, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. 9. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh-isabela 1st District Engineering Office Will Hold A Pre-bid Conference On December 23, 2024 At 10:00 Am At The Dpwh-ifdeo Conference Hall, City Of Ilagan, Isabela Which Shall Be Open To Prospective Bidders. 11. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 12. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_isabela1st@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before January 7, 2025 At 2:00 P.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 13. Bid Opening Shall Be On January 7, 2025 Immediately After The Deadline Of The Receipt Of Bids At Dpwh-ifdeo Conference Hall, City Of Ilagan, Isabela. Bids Will Be Opened In The Presence Of The Bidder’s Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 14. The Dpwh-isabela 1st District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 15. For Further Information, Please Refer To: Engr. William Patrick B. Berin Engr. John Philip M. Rivera, Dpa Asst. District Engineer/bac Chairman Head, Bac Secretariat Email At: Dpwhisabela1stdeo@gmail.com Procurement Unit Approved By: Maricris A. Antonio Chief, Administrative Section Bac Vice Chairman Noted: Deoferio P. Vehemente, Jr. District Engineer Dates Of Posting: Dpwh And Philgeps Websites-december 16, 2024 To December 22, 2024

Details: Description Invitation To Bid 1. The Dpwh-isabela 1st District Engineering Office, City Of Ilagan, Isabela, Through The Dpwh General Appropriations Act 2025 (epa – Early Procurement Activity) Intends To Apply The Sum Stated Below Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Following Projects. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh-isabela 1st District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Contract Id: 25be0032 Contract Name: Convergence And Special Support Program – Sustainable Infrastructure Projects Alleviating Gaps (sipag) - Access Roads And/or Bridges From The National Road/s Leading To Major / Strategic Public Buildings/ Facilities – Construction Of Concrete Road With Slope Protection Structure At Barangay Villa Luz – Barangay Ragan Norte, Delfin Albano, Isabela Contract Location: Delfin Albano, Isabela Brief Description: Road Concreting: L=0.588 Km (1.176 Lane Km), W=5.00m, Thk=200mm Shoulder: L=0.221 Km (0.442 Lane Km) W=0.50m, Thk=150mm Section2: Retaining Wall ( L=221.00m, Ave. Height=2.25m, Area=497.25 Sq.m.); Rc Box Culvert (3-barrel, 1.50m X 1.80m X 7.00m) With Wing Wall Approved Budget For The Contract (abc) = Php14,700,000.00 Contract Duration: 136 Calendar Days Cost Of Bidding Documents: Php25,000.00 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of C & D And Bfor License Classification Small B To Medium A. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contract Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Gppb Resolution No. 15 – 2021 States, “lifting The Suspension On The Implementation Of The Mandatory Submission Of Philgeps Certificate Of Platinum Registration And Membership In Competitive Bidding And Limited Source Bidding; Amending Sections 8.5.2, 23.1 (a)(ii), 23.3, 24.1 (a)(ii), 24.4.3, 34.3 And 54.6 Of The 2016 Revised Irr Of Ra No. 9184, Items Iv (g)(1) And V (d)(1)(b) As Well As Appendix “a” Of Annex “h” Thereof, Items 4 And 6 Of The Guidelines For The Use Of The Government Of The Philippines – Official Merchants Registry, And Item 1 Of Section Viii And Ix Of The 6th Edition Of The Philippine Bidding Documents For Goods And Infrastructure Projects”, Dated October 14, 2021. In Lieu Of The Above, Prospective Bidders Shall Submit In Their Bid The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184). 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra9184), Otherwise Known As The “government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From Dpwh-isabela 1st District Engineering Office And Inspect The Bidding Documents At The Dpwh-isabela 1st District Engineering Office, Procurement Unit/bac Office, City Of Ilagan, Isabela During Weekdays From 8:00 Am To 5:00 Pm. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 16, 2024 To January 7, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. 9. It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh-isabela 1st District Engineering Office Will Hold A Pre-bid Conference On December 23, 2024 At 10:00 Am At The Dpwh-ifdeo Conference Hall, City Of Ilagan, Isabela Which Shall Be Open To Prospective Bidders. 11. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 12. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_isabela1st@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before January 7, 2025 At 2:00 P.m. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. 13. Bid Opening Shall Be On January 7, 2025 Immediately After The Deadline Of The Receipt Of Bids At Dpwh-ifdeo Conference Hall, City Of Ilagan, Isabela. Bids Will Be Opened In The Presence Of The Bidder’s Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 14. The Dpwh-isabela 1st District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 15. For Further Information, Please Refer To: Engr. William Patrick B. Berin Engr. John Philip M. Rivera, Dpa Asst. District Engineer/bac Chairman Head, Bac Secretariat Email At: Dpwhisabela1stdeo@gmail.com Procurement Unit Approved By: Maricris A. Antonio Chief, Administrative Section Bac Vice Chairman Noted: Deoferio P. Vehemente, Jr. District Engineer Dates Of Posting: Dpwh And Philgeps Websites-december 16, 2024 To December 22, 2024

Description: Sources Sought Notice - P273 Bulk Fuel Storage Tank Hydrant System, Naval Air Station - Whidbey Island (naswi), Wa Construction Project For Building And/or Heavy (nonbuilding/ Residential) Requirements

Details: Amendment 002: the Purpose Of This Amendment Is: 1. To Provide Answers To Vendor Questions In Attached Amendment 002. 2. To Provide An Updated Cover Sheet For The Requirement To Correct Previous Errors. _________________________________________ amendment 001: the Purpose Of This Amendment Is To Change The Proposed Start Date To 04/01/2025. _________________________________________ intent To Sole Source fiscal Service Procurement, On Behalf Of The Armed Forces Retirement Home In Washington, D.c. (afrh-w), Intends To Award A Blanket Purchase Agreement To Ae Works Ltd For Continued Work On Their Existing Architect And Engineering (a&e) Services. The Work Consists Of Specific A&e Services For A Continuing Care Retirement Community To Include, But Not Limited To, Feasibility Study, Concept Design, Plans And Specifications, Construction Cost Estimates, Field Engineering Investigation, New Building And Renovation Work, Construction Management And Bridging Documents For Design/build For The Armed Forces Retirement Home (afrh). The Work Will Be For A Base Period Of 12-months, And Three (3) 12-month Option Periods, To Begin On 05/01/2025 Pursuant To Far Part 6.302-1(b)(1)(i). See Attached Draft Performance Work Statement (pws) For Additional Requirements. fiscal Service Will Consider Written Responses Received No Later Than 10:00a.m. Et On Monday, January 13, 2025. Responses Must Include Sufficient Evidence That Clearly Shows The Vendor Is Capable Of Providing Continuing Work On Ae Works Ltd’s Existing A&e Design Services For Afrh-w. If No Written Response Is Received That Clearly Demonstrates The Vendor’s Ability To Meet All Of The Salient Features Of The Requirement, Then Fiscal Service Shall Proceed With An Award On A Sole Source Basis To Ae Works Ltd. no Solicitation Is Available. A Request For More Information, Or A Copy Of The Solicitation, Will Not Be Considered An Affirmative Response To This Special Notice. Telephone Responses Or Inquiries To This Special Notice Will Not Be Accepted. interested Vendors Shall Provide The Following: 1. The Name And Location Of Your Company, Contact Information, Uei Number, And Identify Your Business Size (large Business, Small Business, Disadvantaged Business, 8(a), Service-disabled Veteran Owned Small Business, Hubzone, Etc.) Based On Naics Code 238210 Size Standard $19 Million. Please Ensure Contact Information Includes The Name Of The Point Of Contact, Email Address, And Telephone Number Should The Government Have Questions Regarding Individual Responses. 2. Whether Your Services Are Available Through A Government Contract Vehicle Or Open Market. 3. A Brief Capabilities Statement (not To Exceed 5 Pages) That Includes A Description Of Your Company's Standard Line Of Business, As Well As A List Of Customers Your Company Currently Provides These Products/services For. 4. Complete Details Of Your Company’s Product That Clearly And Sufficiently Demonstrates That It Is An Equivalent Product To The One Stated Above Without Pricing At This Time. responses To This Request Shall Be Submitted By Email To Purchasing@fiscal.treasury.gov And Kaity.eaton@fiscal.treasury.gov Including “ss-afrh-25-029 Attn: Ke/gj” In The Subject Line. The Following File Extensions Are Not Allowable And Application Materials/data Submitted With These Extensions Cannot Be Considered: .bat, .cmd, .com, .exe, .pif, .rar, .scr, .vbs, .hta, .cpl, And .zip Files. microsoft Office Compatible Documents Are Acceptable. no Other Information Regarding This Special Notice Will Be Provided At This Time. this Notice Does Not Restrict The Government To An Ultimate Acquisition Approach. All Vendors Responding To This Notice Are Advised That Their Response Is Not A Request That Will Be Considered For Contract Award. All Interested Parties Will Be Required To Respond To Any Resultant Solicitation Separately From Their Response To This Notice If The Government Determines There Is Clearly An Equivalent Product(s) For The Fire Alarm System Upgrade Required.

Details: This Pre-solicitation Notice Is Not A Request For Proposal. All information Needed To Submit Sf330 Documents Are Contained herein. No Additional Solicitation Package Or Technical information Will Be Issued. project: 544-25-125 Replace Dental Vacuum System work Location: Wm. Jennings Bryan Dorn Va Medical Center, Columbia, Sc 29209 estimated/target Completion Period: 145 Calendar Days After Award. construction Magnitude: Between $100,000 And $250,000. naics: 541330 - Engineering Services small Business Standard: $25.5 Million set-aside: 100% Service-disabled Veteran-owned Small Business (sdvosb) site Visits Will Not Be Arranged During This Phase. the Anticipated Award Date Of The Proposed A-e Contract Is On Or Before September 30, 2025. sf 330 Date Of Receipt/due Date: Interested Firms Having The Capabilities To Perform This Work Must Submit One (1) Electronic Sf 330 And Attachments (if Any) No Later Than (nlt) 12:00 Pm (est) January 13, 2025. ***attention*** Acknowledgement E-mails Will Be Sent From The Co Upon Receipt Of A Submission. If An Acknowledgement Is Not Returned, The Firm Should Contact The Co At Christopher.jenkins@va.gov And 478-595-2794. project Overview: the Columbia Va Health Care System Requires A Designed Solution To Repair Or Replace The Dental Vacuum System To Include All Piping, Pumps, Vacuums, Filters, Separators, Valving, Motors, Starters, Controllers, And All Other Necessary Components To Provide A Completely New System. The Current System Is Not Functioning Properly And Believed To Be Caused By The Current Configuration, Component Locations, And Length Of Installed Vacuum Piping. the End Result Of The Contract Is A Complete Set Of Construction Documents To Repair Or Replace The Existing Dental Vacuum System That Are Prepared For Solicitation For Construction. sdvosb Set-aside: this Requirement Is A 100% Set-aside For Service-disabled Veteran-owned Small Businesses Under The Authority Of 38 U.s.c. 8127(d). To Be Eligible For Award The Sdvosb You Must Be Considered Small Under The Relevant Naics Code. Sdvosb Contractors Must Be Verified And Viewable In Sba Vetcert: Https://veterans.certify.sba.gov/ Prior To Submission Of Proposal And Prior To Award Of Contract With Vaar 804.1103-70. Status As A Qualified Sdvosb Concern Is Under The Authority Of 38 Cfr Part 74 In Accordance With The Va Acquisition Regulation (vaar) Part 819. Any Person, Persons, Or Business Entity Suspected Of Misrepresenting Itself For The Purpose Of Securing A Government Contract May Be Criminally Investigated And Prosecuted For Fraud Against The United States Of America. Parties Found Misrepresenting Their Status Also Risk Debarment From Further Government Contracts. Eligibility Determination Is Performed By The Center For Veterans Enterprise (cve). Eligible Sdvosb Concerns Must Also Be Registered At The Following Websites: system For Award Management (sam): Https://www.sam.gov vets-4212 Federal Contractor Reporting Https://www.dol.gov/agencies/vets/programs/vets4212 important Notice: Prior To Submitting A Proposal Under This Sdvosb Set- Aside Solicitation; Offerors Must Apply For And Receive Verification From The Department Of Veteran Affairs Center For Veterans Enterprise (cve) In Accordance With 38 Cfr Part 74 And Vaar 819.70 By Submission Of Documentation Of Veteran Status, Ownership And Control Sufficient To Establish Appropriate Status. All Offerors Are Urged To Contact The Cve And Submit The Aforementioned Required Documents To Obtain Cve Verification Of Their Sdvosb Status If They Have Not Already Done So. for A Service-disabled Veteran Owned Small Business (sdvosb) To Be Considered As A Prospective Contractor, The Firm, Including Joint Ventures, Must Be Verified And Registered In The Department Of Veteran Affairs (va) Office Of Small & Disadvantaged Business Utilization (osdbu) Sba Vetcert: Https://veterans.certify.sba.gov/ And Registered In The System For Award Management (sam) Database (www.sam.gov) At Time Of Submission Of Their Qualifications. Failure Of A Prospective Sdvosb To Be Verified By The Center For Veterans Enterprise (cve) At The Time The Sf 330 Is Submitted Shall Result In Elimination From Consideration. All Joint Ventures Must Be Cve Verified At Time Of Submission And Submit Agreements That Comply With 13cfr 125.15 Prior To contract Award. in Order To Assure Compliance With Far Clauses, 52.219-14 Limitations On subcontracting (deviation 2019-01) And Vaar 852.219-10, Va Notice Of Total service-disabled Veteran-owned Small Business Set-aside (jul 2019) (deviation), All Firms Submitting A Sf 330 For This Pre-solicitation Notice Are required To Indicate What Percentage Of The Cost Of Contract Performance Will Be Expended On The Concerns Employees And In Which Discipline(s) And Percentage Of Cost Of Contract Performance To Be Expended (and In What Disciplines) By Any Other Consultant/subcontractor Or Otherwise Used Small Or Large Business Entity(s). Any Consultant/subcontractor Or Otherwise Business Entity(s) Used Must Be Identified By Name, Office Location And Size/type Of Business (i.e. Sdvosb, Vosb, 8(a), Small, Large, Etc.). Failure To Provide This Information Will Deem The Firm S Sf 330 Submittal As Nonresponsive And Preclude Further Evaluation. far Part 36.6 (brooks Act) Selection Procedures Apply. The A-e Services Listed Herein Is Being Procured In Accordance With The Brooks Act (public Law 92-582) As Implemented In Far 36.6 And Vaar 836.6. Pursuant To Far, The Firm Responding To This Requirement Must Be Permitted, By Law, To Practice The Professions Of Architecture Or Engineering And Meet All Required Qualifications For The State Of Georgia. sf330s Shall Be Organized In The Following Order: cover Sheet (one-page Limit) design Team Background With Locations Of Supporting Offices (one-page Limit) design Team Organizational Structure With Key Discipline Roles (one-page Limit) factor 1 Specialized Experience (one Page Per Project Limit) factor 2 - Professional Qualifications (one Page Per Resume Limit) factor 3 Past Performance Summary Sheet (one-page Limit) factor 4 - Capacity (one-page Limit) factor 5 Knowledge Or Location (one-page Limit) factor 6 Sdvosb Inclusion Statement (one-page Limit) full Cpars/ppqs Documentation For Factor 1 Projects (20-page Limit) additional Information (10-page Limit) sf330s Received Out Of Sequence Will Be Viewed Negatively. sf330 Specific Requirements: all Sf330 Pages Shall Be Pdf Searchable For Items 1 Through 11 And Item 13. Full Cpars And Ppqs May Be Scanned. start Each Factor Response On A New Page. use No Less Than 11-point Font. all Text And Images Containing Text Is Legible When Printed On 8.5 X 11 Paper. The Evaluation Board Will Not Seek Clarification Regarding Illegible Text. primary Selection Criteria (listed In Descending Order Of Importance): factor 1 specialized Experience (sections F, G And H): Specialized Experience And Technical Competence In The Design And Construction Period Services Will Be Required To Perform Throughout The Life Of The Contract. Projects Experience Pertains To The Types, Size, Recency, Cost, And Complexity Of Work Previously Or Currently Being Performed By The Offeror That Is Comparable To The Work Covered By This Solicitation. page Limit One Page Per Project. Five-page Total For Factor 1. Information Provided On Additional Pages Beyond The One Page Per Project Limit Or Beyond The Five-page Total Limit Will Not Be Included With The Review. relevant Project Experience: Submit Five (3) Projects That Meet All Criteria Shown Below. relevant Project Type Design-bid-build Projects Involving Site Investigation, Schematic Design, Design Development, And Construction Documents. Dental Vacuum System Replacements, Renovations Of Dental Clinics That Include New Dental Vacuum Systems, And New Building Construction That Include New Dental Vacuum Systems Are Acceptable Project Types. Masterplan And Rfp Development For Design-build Contracts Will Not Be Viewed As Relevant. relevant Project Size Systems Service Five Dental Chairs Or More. relevant Project Recency Project Construction Must Be Complete Or Substantially Complete Within The Past Five Years Of The Solicitation Due Date. Substantially Complete Is Defined As 80% Or Greater Of The Construction Project Is Complete At The Time Of The Solicitation Due Date. relevant Project Cost - Construction Project Cost Must Be Greater Than $75,000 relevant Project Complexity The Project Narrative Description Must Indicate Experience With All The Following Criteria: designing Main Vacuum Systems That Include Amalgam Separators For Dental Service Lines. designing Infection Control Risk Mitigation Plans designing New Pump/vacuum Drive And Controller System the Relevant Project Criteria Listed Above Is The Minimal Information Required For Acceptable Project Relevance. Additional Value Will Be Considered For Projects Which Convey Expertise With The Following Categories And Will Potentially Increase The Overall Rating For This Factor. Projects That Do Not Convey Additional Value Expertise Will Not Be Considered A Weakness. Additional Value Expertise Includes: experience With The Submitting Firm Serving As The Prime Contractor Leading A Multi-discipline Team Through Investigative, Design, Solicitation, And Construction Period Services. These Services Must Be Documented For Each Project Narrative. designing Hazardous Material Abatement Plans experience With Recent Projects Intended To Support Service Line Dental Service Lines. va Projects Showing Documented Experience With Implementing Va Design Guides And Standards From The Technical Information Library. experience With Recent Projects Located In The Columbia, Sc, South Carolina Midlands Area, Or Adjacent Counties. experience With Recent Projects That Include Implementing Va Cad And Bim Standards. submissions Shall Include No More And No Less Than Three (3) Type Projects Of Recent And Relevant Government And Private Experience Projects Similar In Type, Size, Recency, And Complexity, Cost, And Experience With The Type Of Projects/competence Above. section G Will Used To Evaluate The Prior Experience Of The Prime Firm And Any Key Subcontractors Working Together As A Cohesive Unit On The Provided Relevant Projects. An Acceptable Rating Will Be Given If All Key Disciplines Are Shown, And Each Discipline Participated With At Least One Project Listed On Section G. Proposed Design Team Members That Do Not Have Experience With Any Of The Five Submitted Example Projects As Shown In Section G Will Be Viewed Negatively. factor 2 professional Qualifications (sections C Through E) Necessary For Satisfactory Performance Of Required Service. The Ae Shall Demonstrate They Are Able To Sign And Stamp Each Drawing By Individuals Licensed In Any State In The United States For The Key Positions Listed Below. The Design Firm And A-e Staff Representing The Project Must Be Licensed To Practice In Any State Of The United States Of America. Provide Professional License Numbers And/or Proof Of Licensure. The Evaluation Shall Consider The Specific Experience (minimum Of Five Years) And Qualifications (i.e., Education, Training, Registration, Certifications, Overall Relevant Experience, And Longevity With The Firm As Full-time Employees) Of Personnel Proposed For Assignment To The Project, And Their Record Of Working Together As A Team When Evaluating Professional Qualifications. The Lead Designer In Each Discipline Must Be Registered To Sign Drawings In Each Discipline Must But Does Not Have To Be Registered In The State Where The Project Is Located. The Licensed Professional Must Hold Current Licensure For Said Discipline To Practice In Any State Of The United States Of America. Engineer-in -training (eit) Is Not Considered A Professional Licensure. page Limit One Page Limit Per Position Resume 8 Pages Total For Factor 2. Information Provided On Additional Pages Beyond The 8-page Limit Will Not Be Included With The Review. resume Requirements - A Resume For Each Of These Key Positions Must Be Provided Identifying Their Specific Role, Via Section E In The Sf330. Key Positions And Disciplines Required For This Project Include, But Are Not Limited To, The Lists Of Professionals With Required Licensure And Preferred Licensure Below. An Unacceptable Rating May Be Given If Resumes Are Not Provided For All Roles Listed. positions Requiring Professional Licensure. Not Providing The Professional Licensure Will Be Viewed Negatively And Will Not Be Compliant With The Solicitation. architect mechanical Engineer electrical Engineer fire Protection Engineer plumbing Engineer key Positions With Preferred Qualifications. Design Team Professionals That Have Obtained The Indicated Preferred Licensure May Be Viewed More Favorably. Not Providing The Professional Licensure Will Not Be Viewed Negatively And Will Not Reduce The Overall Rating For This Factor. Higher Value Will Be Given For Professionals With The Preferred Professional Licensure. quality Control Manager - Either Cqm, Cqe, Lean Six Sigma Black Belt, Or Experience With Minimum Five Projects Were Served As Qc Manager. project Manager - Project Management Professional (pmp) Certification Or More Than 10 Years Experience With Managing A/e Design Projects. construction Cost Estimator - Aspe Certified Professional Estimator (cpe) Certification multi-function Roles Are Allowable For The Following Positions And May Be Shown As Multi-role Positions On The Resumes: mechanical And Plumbing Engineering. architect, Seps Manager, Bim Manager, Interior Designer electrical Engineer And Rcdd project Manager And Quality Control Manager include The Home Office Location For Each Key Discipline Identified On Each Respective Resume In Section E Block 15. the Criteria Listed Above Is The Minimal Information Required For Acceptable Professional Qualifications. Additional Value Will Be Considered For Each Key Position And Will Potentially Increase The Overall Rating For This Factor And Shall Not Exceed The Prescribed Page Limit. key Personnel Having Greater Than 10 Years Experience In The Practicing Field. key Personnel With Greater Than Five Years Employment With The Proposed Design Team Firm. va Design And Construction Experience Within The Past Five Years. any Other Information The Design Team Wishes To Include For This Factor So Long As The Page Limit Is Not Exceeded. factor 3 past Performance (section H): Past Performance Will Be Evaluated On Contracts With Government Agencies And Private Industry In Terms Of Cost Control, Quality Of Work, And Compliance With Performance Schedules Along With The Firm S History Of Design Error, Omission, And/or Deficiency Claims. past Performance Will Be Evaluated For All Projects Provided In Section F. The Contractor Performance Assessment Rating System (cpars) Database Will Be Reviewed To Evaluate The Projects That Have A Va Cpars Entry. Va Cpars Are Not Required To Be Submitted With The Sf330 Submission. However, If The Va Cpars Is Not Included With The Sf330 Submission, Then The Contract Number For The Project Must Be Submitted For Each Project Provided In Section F So Cpars Can Be Reviewed In The Database. Please Note We Are Unable To Review Any Cpars From Other Federal Agencies, Outside Of The Va. for Any Project That Does Not Have Va Cpars Data Available, A Past Performance Questionnaire (ppq) Is Required To Be Submitted With The Sf330. If The Firm (prime Or Subcontractor) Was Not The Prime Contractor On Any Project Submit-ted In The Sf330 A Ppq Must Be Provided Listing Their Specific Role As A Subcontractor. The Ppq Should Be Rated And Signed By The Evaluator. In The Event That A Firm Does Not Receive A Requested Complete Ppq From An Evaluator Prior To The Time For Submission, The Firm Shall Submit The Partially Completed Ppq With Section 1 And The Evaluator Information In Section 2 Completed. Ensure A Poc Is Listed With The Project Title/contract Number. The Va Will Make Reasonable Attempts To Contact The Poc Upon Submission For Ppq Completion. the Government May Also Consider Additional Performance Related Information Regarding The Firm, To Include Customer Inquiries, Government Databases, Publicly Available Sources, And Additional Projects In Cpars. The Government Reserves The Right To Contact Any Poc Listed On A Cpars Report Or Ppq. If Appropriate, The Record Of Significant Claims Against The Firm Because Of Improper Or Incomplete Architectural And Engineering Services May Be Evaluated. failure To Provide Requested Data, Accessible Points Of Contact, Or Valid Phone Numbers Will Result In A Firm Being Considered Less Qualified. The Information For This Factor Shall Be Provided In Section H Of The Sf 330. for Ppqs, Please Utilize The Attached Ppq Document. Completed Ppqs Should Be Incorporated Into The Sf 330 Directly. Ppqs Should Not Be Submitted To The Vha Pcac Directly. Any Cpars And Ppqs Will Not Be Counted Towards The Page Limitations For This Submission. However, Any Narratives Provided For Past Performance In Section H Will Be Counted Toward The Page Limit. page Limit Provide No More Than One Page Total For This Factor For The Summary Page. Full Cpars/ppq Documentation Shall Be Included On Additional Pages With The Sf330 And Will Not Count Towards The Total Page Count. provide A Summary Page That Provides The Factor S Required Information. For Each Of The Five Projects, Provide The Following Information. project Information (each Project For Specialized Experience) past Performance Record Type (ppq Or Cpars) contract Number point Of Contact (name, Phone, Email, Job Title, Poc Role) ae Firm Role With Project (prime Or Subcontractor) category Ratings provide Complete Cpars (or Ppqs If Cpars Is Not Available) For All Sample Projects After The Sf330 Factor 8 Section. the Criteria Listed Above Is The Minimal Information Required For Acceptable Factor Compliance. Additional Value Will Be Considered For Each Additional Item Below And May Potentially Increase The Overall Rating For This Factor. Locate This Documentation After The Complete Cpars/ppq Documents. Additional Value Documentation Shall Not Exceed Five Pages. letters Of Appreciation Or Accolades From Previous Projects industry Recognition Or Design Awards any Other Information The Design Team Wishes To Include For This Factor So Long As The Five-page Limit Is Not Exceeded. factor 4 capacity (section H): The Evaluation Will Consider The Firm S Ability To Meet The Schedule Of The Overall Project, As Well As The Available Capacity Of Key Disciplines To Perform The Work In The Required Time. Provide The Available Capacity Of Key Disciplines By Providing Current Project Workload, Inclusive Of All Projects Awarded By The Va, Any Federal Agency, And Private Sector During The Previous Twelve (12) Months And The Full Potential Value Of Projects Forecasted Within The Next Twenty-four (24) Months Any Current Indefinite Delivery Contracts That The Firm Has. Include The Full Potential Value Of Any Current Indefinite Delivery Contracts. Offeror Shall Clearly State Their Available Capacity Presenting Workload Percentages For The Key Disciplines And/or Team Members, Including Sub-consultants. Also, The Offeror Must Provide The Completion Percentages And Expected Completion Date For All The Va Projects Current And Forecasted. Awarded In The Previous 12 Months. Please Ensure The Capacity Applies Toward The Team/personnel Provided In The Sf330. The Information For This Factor Shall Be Provided In Section H Of The Sf330. page Limit Provide No More Than Two Pages Total For This Factor. Information Provided On Additional Pages Beyond The One-page Limit Will Not Be Included With The Review. include A Table That Conveys Each Key Discipline, Quantity Of Current Design Project Workload, Quantity Of Current Construction Period Service Workload, Estimated Future Design Load, Estimated Future Construction Workload, Quantity Of Current Idiq Contracts, Total Idiq Contract Capacity, Total Remaining Idiq Capacity, And Percent The Key Discipline Is Available. For Example: key Discipline total # Of Current Design Project Workload # Of Current Construction Project Workload estimated # Of Future Design Project Workload estimated # Of Future Construction Project Workload quantity Of Current Idiq Contracts Involved With total Idiq Capacity All Contracts (millions) total Idiq Remaining Capacity (millions) percent Available capacity architect 6 7 6 7 4 $1m $2m 45% mechanical Engineer 4 8 3 8 2 $1m $1 10% add Disciplines As Required the Criteria Listed Above Is The Minimal Information Required For Acceptable Factor Compliance. Additional Value Will Be Considered For Each Additional Item Below And May Potentially Increase The Overall Rating For This Factor. Do Not Include Additional Pages In The Additional Information Section. providing A Narrative Conveying The Design Team S Approach On How New Work Will Merge With The Current Workload. provide A Narrative Describing The Process Regarding Replacement Of Key Disciplines Should One Decide To Leave The Design Team. convey How The Design Team Can Maintain Schedule If A Key Discipline Member Is No Longer Available? any Other Information The Design Team Wishes To Include For This Factor So Long As The Page Limit Is Not Exceeded. factor 5 knowledge Of Locality (section H). Knowledge Of The Locality, To Include Specific Knowledge Of Certain Local Conditions Or Project Site Features, Such As Geological Features, Climatic Conditions, Working With And Local Construction Methods Or Local Laws And Regulations. The Information For This Factor Shall Be Provided In Section H Of The Sf 330. note That The Intent Of This Factor Is To Showcase A Firm S Understanding Of The Site And Locality, And Not Where The Firm Is Located, How Far Away The Firm/branch Office Is From The Site, And How They Would Travel To The Site. page Limit Page Limit Provide No More Than One Page Total For This Factor. Information Provided On Additional Pages Beyond The One-page Limit Will Not Be Included With The Review. provide An Individual Narrative Conveying Knowledge Of The Locality For Each Of The Following Categories: local Conditions Or Project Site Features climatic Conditions geologic Features working With And Local Construction Methods working With Local Laws And Regulations the Criteria Listed Above Is The Minimal Information Required For Acceptable Factor Compliance. Additional Value Will Be Considered For Each Additional Item Below And May Potentially Increase The Overall Rating For This Factor So Long As The Page Limit Is Not Exceeded. Do Not Include Additional Pages In The Additional Information Section. experience With Seismic Designs Applicable To The Columbia, Sc Area. any Other Information The Design Team Wishes To Include For This Factor So Long As The Page Limit Is Not Exceeded. factor 6 use Of Service- Disabled Veteran-owned Small Businesses, Veteran-owned Small Businesses, And Other Types Of Small Businesses As Subcontractors. Offerors Shall Be Evaluated Based On Their Utilization Plans For Service- Disabled Veteran- Owned Small Businesses (sdvosbs), Veteran-owned Small Businesses (vosbs), Or Other Types Of Small Businesses. Offerors Shall Submit Qualifications For Proposed Consultants Per Other Criteria In This Solicitation. page Limit Page Limit Provide No More Than One Page Total For This Factor. Information Provided On Additional Pages Beyond The One-page Limit Will Not Be Included With The Review. provide A Listing Of All Consulting Firms And Business Government Certification(s). Indicate The Anticipated Percentage Of Work The Consulting Firm Will Perform. the Criteria Listed Above Is The Minimal Information Required For Acceptable Factor Compliance. The Higher Percentage Of Certified Sdvosb Firms Included With The Design Team May Provide Additional Value And Potentially Increase The Overall Rating For This Factor So Long As The Page Limit Is Not Exceeded. Do Not Include Additional Pages In The Additional Information Section.

Details: A new rescue station with a vehicle hall with two parking spaces is being built on the property in the industrial estate in 15936 Dahme/Mark. The two-storey new building has a floor plan area of approx. 54.80 m by 10.86 m. The total height of the building is between approx. 4.5 m and 6.95 m. The rescue station is being built using solid construction. The building can be divided into two parts: the two-storey vehicle hall and the surrounding functional rooms, as well as the single-storey lounge area. The vehicle hall has a suspended metal facade, while the lounge area has an outer shell made of exposed brickwork. The OKFF Eg is 86.70. The ground level in the adjacent building is relatively level and is around 86.10 Dhhn2016 and partly higher. The height difference is compensated by L-angle walls and terrain adjustments along the trench. The existing subsoil of the treatment area was replaced during the foundation work by the building construction and filled with compactable natural material. The average heights of the surrounding public roads are between 86.40 - 86.90.