Bridge Tenders

Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Vii South Road Properties, Cebu City Invitation To Bid For 25h00058 - Organizational Outcome 1: Ensure Safe And Reliable National Road System, Network Development Program, Road Widening - Secondary Roads, Cebu North Hagnaya Wharf Rd - K0067 + 000 - K0070 +000 1. The Department Of Public Works And Highways Regional Office Vii, Through The Fy 2025 Nep Under Early Procurement Activity Intends To Apply The Sum Of Php173,000,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Organizational Outcome 1: Ensure Safer And Reliable National Road System, Network Development Program, Road Widening-secondary Roads, Cebu North Hagnaya Wharf Rd-k0067+000-k0070+000 With Contract Id No. 25h00058. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Department Of Public Works And Highways Regional Office Vii Now Invites Bids For The Hereunder Works: Name Of Contract : Organizational Outcome 1: Ensure Safer And Reliable National Road System, Network Development Program, Road Widening-secondary Roads, Cebu North Hagnaya Wharf Rd-k0067+000-k0070+000 Contract Id No. : 25h00058 Locations : Cebu Province Scope Of Works : Road Widening Approved Budget For The Contract : Php 173,000,000.00 Contract Duration : 330 Calendar Days Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Category Of Medium B For Road, Highway Pavement And Railways, Airport Horizontal Structures And Bridges For License Classification A. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii-5.2 And Section Iii 5.2 Of Bidding Documents. 3.1 Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 3.2 As Provided In Section 25 Of The R-irr Of R.a. 9184, Bidders Shall Submit Their Bids Through Their Duly Authorized Representative. The Representative Must Be Named In The Contractors Registration Certificate (crc) Recorded In The Dpwh Civil Works Application (cwa) Or If Not, There Must Be A Duly Signed Special Power Of Attorney (spa) Presented In Hard Copy And Soft Copy Of The Spa Must Also Be Emailed To Procurementro7@gmail.com Using The Official Email Address Of The Bidder Registered In The Cwa For Verification. Failure To Send A Copy Of The Spa From The Official Cwa Registered Email Address Of The Bidder Shall Not Be Issued An Order Of Payment. 4. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 5. Interested Bidders May Obtain Further Information From Department Of Public Works And Highways Regional Office Vii And Inspect The Bidding Documents At The Address Given Below During Weekdays From 8:00 A.m. To 5:00 P.m. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 17, 2024 From Given Address And Website/s Below Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php50,000.00. 7. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 8. The Department Of Public Works And Highways Regional Office Vii Will Hold A Pre-bid Conference On December 26, 2024 At 10:00 A.m. At The Strategy Room Of Dpwh-regional Office Vii, South Road Properties, Cebu City And Through Regional Office Official Youtube Channel Dpwh Regional Office Vii Procurement Ls Or Youtube Handle: @dpwh.ro.7. 9. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 10. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_r7@dpwh.gov.ph For Electronic Submission On Or Before January 07, 2025 At 10:00 A.m. Together With The Proof Of Purchase/receipt. Late Bids Shall Not Be Accepted. 11. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 15. 12. Bid Opening Shall Be On January 07, 2024 At 10:30 A.m., Strategy Room Of Dpwh Regional Office Vii, South Road Properties, Cebu City And Through Regional Office Official Youtube Channel Dpwh Regional Office Vii Procurement Ls Or Youtube Handle: @dpwh.ro.7. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 13. The Department Of Public Works And Highways Regional Office Vii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 14. For Further Information, Please Refer To: Engr. Odilon N. Andrino Head Procurement (032)4116752; (032)4116753 Email Address: Andrino.odilon@dpwh.gov.ph Or Procurementro7@gmail.com 15. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.dpwh.gov.ph And Philgeps Website For Online Bid Submission: Electronicbids_r7@dpwh.gov.ph Jerry B. Evangelio Bac Chairman Contract Id No.: 25h00058 Dpwh And Philgeps Websites Posting: December 17 – December 24, 2024

Details: Description Republic Of The Philippines Department Of Public Works And Highways Iloilo 4th District Engineering Office Bolong Este, Sta. Barbara, Iloilo, Region Vi Invitation To Bid For Contract Id No.: 25gi0055 Contract Name: Replacement Of Concrete Pavement Along Cabatuan-new Lucena-banga Bante Road (s00545pn), K0035+000 - K0036+000 With Exception, New Lucena, Iloilo 1. The Dpwh – Iloilo 4th District Engineering Office Through The Fy 2025 Maintenance And Other Operating Expenses (mooe) - Early Procurement Activity (epa) Intends To Apply The Sum Of Two Million Five Hundred Thousand Pesos Only (php 2,500,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Replacement Of Concrete Pavement Along Cabatuan-new Lucena-banga Bante Road (s00545pn), K0035+000 - K0036+000 With Exception, New Lucena, Iloilo / 25gi0055. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Dpwh – Iloilo 4th District Engineering Office Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Replacement Of Concrete Pavement Along Cabatuan-new Lucena-banga Bante Road (s00545pn), K0035+000 - K0036+000 With Exception, New Lucena, Iloilo Contract Id No. : 25gi0055 Locations : New Lucena, Iloilo Scope Of Works : Replacement Of Concrete Pavement Approved Budget For The Contract : Php 2,500,000.00 Contract Duration : 23 C.d. Prospective Bidders Should Be (1) Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Small B Of License Category C & D For Ge-1 (road, Highways, Pavement, Railways, Airport Horizontal Structure, And Bridges). The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Annex Ii-1.1 B Section Ii And Iii Of Bidding Documents. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. Per Gppb Resolution No. 15-2021, Prospective Bidders Are Required To Upload And Maintain Current Of The Following Eligibility Documents In The Philgeps: A. Registration Certification (sec/dti Registration) B. Mayor’s/business Permit Or Its Equivalent Documents C. Tax Clearance D. Pcab License And Registration, And E. Audited Financial Statements Any Expired Document Among The Afore-cited Eligibility Documents Shall Render The Philgeps Platinum Registration Certificate As Automatically Suspended And Its Validity Shall Resume Only Once The Said Expired Document Is Already Updated With The Philgeps. For Recently Expired Mayor’s Permit, The Recently Expired Mayor’s Permit Together With The Official Receipt As Proof That The Prospective Bidder Has Applied For Renewal Within The Period Prescribed By The Lgu Shall Be Accepted By The Philgeps For The Purpose Of Updating The Philgeps Certificate Of Platinum Registration And Membership. Consequently, The Prospective Bidders Shall Maintain An Updated And Current Philgeps Platinum Registration And Membership In The Civil Works Application (cwa). Prospective Bidders With Expired Eligibility Documents And Have Not Yet Updated Their Record In The Cwa Are Advised To Attached Their Newly Updated Platinum Registration And Membership Certificate, In The Technical Bid Documents And Not The Updated Particular Eligibility “class A” Document, To Be Considered Eligible By The Bids And Awards Committee. Prior To The Sale Of Bidding Documents, Only The Following Documents Are Required From Prospective Bidders, To Wit: A. Company Id Or Any Government Issued Id B. Authorization Letter (if Not Authorized Liaison Officer In The Cwa, I.e. Special Power Of Attorney For Sole Proprietorship; Or Board / Partnership / Joint Venture Resolution With Secretary's Certificate For Corporation / Partnership / Joint Venture / Cooperative) (memo 097.7_030623_reiteration Of Department Policies Issuances On The Sale Of Bidding Documents And Enrollment In The Civil Works Application Prior Bidding) 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184). 4. Interested Bidders May Obtain Further Information From The Dpwh – Iloilo 4th District Engineering Office And Inspect The Bidding Documents At Bac Office, Dpwh Iloilo 4th Deo, Brgy. Bolong Este, Sta. Barbara, Iloilo During Weekdays From 8:00 A.m. To 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 24 - January 14, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb In The Amount Of Five Thousand Pesos Only (php 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Presented In Person. 6. The Dpwh – Iloilo 4th District Engineering Office Will Hold A Pre-bid Conference On January 2, 2025 At 10:00 A.m. At Bac Office (procurement Unit), Dpwh – Iloilo 4th District Engineering Office, Sta. Barbara, Iloilo And Through Video Conferencing And Webcasting Via Https://www.youtube.com/@dpwh.iloilo4.deo. And Microsoft Teams, Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat At The Address Below For Manual Submission Or At Electronicbids_iloilo4@dpwh.gov.ph For Electronic Submission On Or Before January 14, 2025 At 9:00 A.m. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On January 14, 2025, Immediately After The Deadline Of Submission And Receipt Of Bids At Bac Office (procurement Unit), Dpwh-iloilo 4th District Engineering Office, Sta. Barbara, Iloilo And Through Video Conferencing And Webcasting Via Https://www.youtube.com/@dpwh.iloilo4.deo. And Microsoft Teams. Bids Will Be Opened In The Presence Of The Bidder's Representative Who Choose To Attend At The Activity. 10. Bid Submission Maybe Done Manually Or Electronically/online. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds. 11. The Dpwh –iloilo 4th District Engineering Office Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Elna P. Nepomuceno Head, Bac Secretariat Dpwh –iloilo 4th Deo Sta. Barbara, Iloilo Tel No. (033) 3329762 Dpwhsbiloilo@yahoo.com Eva S. Bedonia Bac Chairperson Dpwh –iloilo 4th Deo Sta. Barbara, Iloilo Tel No. (033) 3329762 Dpwhsbiloilo@yahoo.com 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.dpwh.gov.ph / Notices.philgeps.gov.ph Advertisement/publication: Philgeps/dpwh Website Date Of Issue: December 24, 2024 Eva S. Bedonia Bac Chairperson

Details: Building physics: thermal insulation and energy balance ISD Annex 1 (to Section 3 Paragraph 1), Section 1.2 Hoai For phased commissioning Basic information on the project The town of Ruhland, with around 3,800 residents, is a municipality in the Ruhland district and a basic functional focus for the around 7,200 residents of the Ruhland district. There are no buildings for unrestricted use for sports, clubs and the public in the town of Ruhland or in the wider district. The old gymnasium is currently in danger of collapsing and is therefore not usable. Due to the industrial complex bordering Ruhland to the north, Ruhland and other municipalities in the district are becoming increasingly attractive as places to live. This also increases the demand for a sports facility. The project is intended to significantly improve the living environment. The focus is on creating cross-generational leisure opportunities. The multi-purpose hall is intended to be a modern training and competition venue for the sports clubs in the Ruhland district. In addition, the project will significantly improve the conditions for school sports, which indirectly contributes to securing the school locations in the Ruhland district. This is also a location factor that should not be underestimated for the development of "residential quarters". At the same time, this hall will enable all residents of the community association to experience culture in the countryside across generations (e.g. concerts by choirs, marching bands, theater performances). Since the club landscape in the Ruhland district is already extremely diverse with around 100 active clubs, this building can also make a significant contribution to strengthening the club landscape and thus to strengthening volunteer work. The barrier-free use of the building is just as important as the resource-saving construction of a building that can make an important contribution to achieving climate protection goals both in construction and operation. The project is a hall with three hall sections. The dimensions of the hall area should be 22 MX 45 m, making the size of a handball court (20 MX 40 m) feasible. The size of the hall corresponds to the space recommendations for general education schools in the state of Brandenburg. Areas should be taken into account that correspond to the model area recommendations of the Brandenburg Ministry of Education, Youth and Sport. The hall should be usable as a competition, training and cultural event venue with spectator stands. With a view to the share of the costs for the operation and maintenance of the building, which are usually many times the investment, a key goal of the planning will be to build in a way that conserves resources and is therefore climate-friendly. The use of a heat pump using surface heating is one of many options. Support for the power supply and hot water preparation through solar gains is mandatory. A less structured building should therefore help to use the energy generated efficiently. A key planning task will have to be to adequately meet the usage requirements with a minimum of technical building equipment. The estimated total cost of the multi-purpose hall is approximately EUR 7,130,000 net. The estimated cost of the services for Kg 300 and 400 is approximately EUR 5,700,000 net. Services in detail Item Description Quantity Stage 1 Basic investigation (lph 1), preliminary design planning (lph 2) 1.1 Basic service Lph 1: Basic investigation A) Clarify the task; B) Establish the basics, specifications and objectives. Psch 1.2 Basic service Lph 2: Assist in preliminary planning A) Analysis of the basics; B) Clarify the key relationships between buildings and technical systems, including consideration of alternatives; C) Preliminary dimensioning of the relevant components of the building; D) Assist in coordinating the specialist planning concepts for the object planning and the specialist planning; E) Creating an overall concept in coordination with the property planning and specialist planning; F) Creating calculation models, listing the key parameters as a working basis for the property planning and specialist planning. Psch 1.3 Special service Lph 2: Energy concept in the preliminary planning A) Advice on funding options with regard to building energy efficiency; B) Creating an energetic building model based on the planning status of the preliminary planning (lph 2); C) Coordination with the property planning, TGA specialist planning and ELT specialist planning for the conditioning of the building zones; D) Energy balance according to DIN V 18599 taking into account the heating, hot water preparation, ventilation, cooling and lighting systems; E) Carrying out variant studies with regard to the energetic quality of the thermal building envelope and the energy supply of the building complex with heat energy and electricity; F) Assessing the variants in terms of cost-effectiveness (lcc) and ecology (lca) and presenting the performance (advantages and disadvantages); G) Explaining the results in a video conference or meeting in Ruhland; H) Selecting a preferred variant in coordination with those involved in the planning; I) Documentation in the form of a report. J) Creating up to 3 variants for the energy concept based on the preferred variant of the preliminary design planning. Psch Level 2 Design planning (lph 3), approval planning (lph 4) 2.1 Basic service Lph 3: Participating in the design planning A) Updating the calculation models and the key parameters for the project; B) Participating in updating the planning concepts for the object planning and specialist planning up to the complete design; C) Dimensioning the components of the building; D) Drawing up overview plans for component layers and the explanatory report with specifications, fundamentals and design data. Psch 2.2 Basic service Lph 4: Participating in the approval planning A) Participating in drawing up the approval planning and in preliminary discussions with authorities; B) Drawing up formal evidence of thermal building physics; C) Completing and adapting documents. Psch 2.3 Special service Lph 3: Energy concept in design planning A) Updating the energy concept in design planning taking into account the results of the thermal building simulation with regard to ventilation, heating and cooling of the building; B) Taking into account the planning status of the design planning. Psch 2.4 Special service Lph 3: 2D thermal bridge calculation A) Investigation of the minimum thermal insulation for a selected thermal bridge detail; B) Creation of a digital 2D model taking into account the component geometry and material parameters; C) Specification of the thermal boundary conditions in accordance with DIN 4108-2; D) Determination of the critical surface temperature and the critical FRSI value and comparison with the requirement values in accordance with DIN 4108-2; E) Development and coordination of necessary measures to ensure compliance with the proof of minimum thermal insulation in accordance with DIN 4108-2; F) Documentation of the results. 1 piece Ep per piece 2.5 Special service Lph 3: Proof of equivalence in accordance with DIN 4108 Bbl. 2 A) Proof of the equivalence of the thermal bridge details of the thermal building envelope of the building with the standard details in DIN 4108 Bbl. 2 (this means that a reduced thermal bridge surcharge of 0.05 W/(m²k) instead of 0.10 W/(m²k) can be taken into account in the GEG proof); B) Documentation in the form of a report. Psch 2.6 Special service Lph 3: Proof of moisture protection in accordance with DIN 4108-3 A) Examination of the moisture protection for all necessary external components of the building in accordance with GEG § 11 IVM DIN 4108-3; Comparison of the planned components with the verification-free designs specified in DIN 4108-3; coordination of possible measures to meet the moisture protection requirements; B) Advice on the need for alternative verification methods in accordance with item 2.7 or 2.8 if individual component verifications are not met; C) Preparation of verifiable verification of moisture protection for submission to the responsible authority provided that all component verifications are met. Psch 2.7 Special service Lph 3: Verification of moisture protection using the Glaser method A) Investigation of the moisture protection for a selected component construction in accordance with DIN 4108-3 Appendix A; B) Calculation of the amount of condensate using the simplified periodic balance method (Glaser method) and comparison with the calculated evaporation amount; C) Moisture-related assessment of the calculation results. 1 piece Ep per piece 2.8 Special service Lph 3: Proof of moisture protection using hygrothermal simulation A) Investigation of the moisture protection for a selected component construction in accordance with DIN 4108-3 Appendix D; B) Creation of a one-dimensional component model including the detailed layer structure of the component construction to be investigated; C) Implementation of the hygrothermal material properties; D) Consideration of moisture entry as a result of driving rain and/or infiltration; E) Illustration of the orientation of the component and definition of the surface transfer coefficients; F) Determination of the initial temperature and initial moisture for each component layer; G) Selection of suitable data sets for the outside and inside climate; H) Simulation of the transient hygrothermal component behavior under real climatic conditions over a period of several years; I) Moisture-related evaluation of the simulation results. 1 piece Ep per piece Level 3 Execution planning (lph 5) 3.1 Checking the execution planning of the object planning (lph 5) A) Working through the results of service phases 3 and 4, taking into account the specialist planning integrated into the object planning, B) Contributing to the execution planning by providing additional information for the object planning and specialist planning Psch 3.2 Special service Lph 5: Checking all essential details of the building envelope for compliance with the planned constructions with regard to thermal bridges. Psch Level 4 Construction execution/documentation (lph 8) 4.1.1 Site inspections (lph 8) A) On-site construction site inspection to check thermal insulation issues, drawing up a report including photo documentation; B) Handing over the report and the original photos with date and time to the client. 1 H Ep Each H 4.1.2 Site inspections (lph 8) A) Arrival and departure, including all travel costs 1 pc Ep Each pc 4.2 Preparation of the energy certificate (lph 8) A) Handover of a requirements matrix to the documentation, preparation of the energy certificate according to the built object after completion. Psch Level 5 Accompaniment of building certification 5.1 Thermal building simulation in the design planning (lph 3) to check and optimize the thermal comfort A) Creation of a detailed 3D building model of the building complex based on the planning status of the preliminary planning, including consideration of the geographical location, the building's own shading and the shading from any existing neighboring buildings; B) Zoning of the building according to the planned use; C) Implementation of the physical component properties from the preliminary planning or the energy concept (u-value, thermal storage mass, G-value of the glazing, radiation values of the sun protection, etc.); Coordination of the internal heat loads from people, lighting and devices with those involved in the planning; Consideration of the planned systems for heating, cooling and ventilation from the preliminary planning or the energy concept; D) Selection of max. 5 reference rooms for the detailed evaluation of the results in coordination with the client; E) Carrying out the building simulation with the local test climate data from the German Weather Service; F) Assessment of the summer thermal comfort in the reference rooms according to DIN EN 15251; G) Variant study (max. 5 variants) for dimensioning or optimizing the transparent components, the sun protection systems and the ventilation and cooling systems with regard to thermal comfort in summer; H) Explanation of the results in a video conference or meeting in Ruhland; I) Selection of a preferred variant together with those involved in the planning and the client. Psch 5.2 Thermal building simulation in the draft planning (lph 3) to check the requirements according to DIN 4108-2 and ASR A3.5 A) Checking the preferred variant from item 5.1 with regard to compliance with the requirements of ASR A3.5 and the building law requirements for summer thermal insulation according to Geg § 14 IVM DIN 4108-2 B) Documentation in a report. Psch 5.3 Thermal building simulation in the approval planning (lph 4) A) Updating the thermal building simulation in the approval planning taking into account the results of the draft planning; B) Taking into account the planning status of the approval planning, creating verifiable proof of summer thermal insulation for submission to the responsible authority. Psch 5.4 Participation in audits in certification processes (lph 3) A) Calculation of alternative building conditioning in the Lph 3 according to DIN 18599, specification of the calculation results per energy source final energy (same object geometry). 1 piece Ep per piece 5.5 Daylight simulation A) Calculations and evidence for the profile visual comfort according to Bnb daylight availability entire building B) Daylight simulation, from which the daylight quotients arise, C) Or alternatively: extracts from the public law evidence according to valid Geg, from which the daylight quotients arise. D) Documentation of the calculated daylight quotients of the usable rooms of the entire building with area information and labeling of the areas whose Df (daylight factor) is > 1; 1.5 or 2%. E) Availability of daylight for permanent workplaces F) Extracts from the calculation of the relative, annual useful lighting for the G) standard usage times according to DIN V 18599-4 H) Documentation of the calculated relative, annual useful lighting of the individual workplaces Psch

Tender Id: CEWMMR032024-2025-BRIDGE-SHOP-MMR-ENGINEERING/CENTRAL RLY | Repairs To South Side Old Boundary Wall Along The Satwai Nallah Of C.e.workshop Manmad.

Tender Id: CEWMMR042024-2025-BRIDGE-SHOP-MMR-ENGINEERING/CENTRAL RLY | Repairs To Water Supply Pipeline

Tender Id: 32-W-INSTRUMENTATION-MB-BRIDGELINE-TKJ-ENGINEERING/NORTHERN RLY | Instrumentation And Condition Monitoring Of One Span Of Br. No. 52 Dn (11x61.0m) On Mb-gzb Section & One Span Of Each Br. No. 1137 Up & Dn (10x61.0m) On Be-mb Section Over Mb Division Under Xen/bl/mb.

Tender Id: 32-W-BR-294-293-UMB-BRIDGELINE-TKJ-ENGINEERING/NORTHERN RLY | Work Of Dismantling Of Trough Plate And Provision Of Gusset Plates, Lateral Bracings X-frames, Top Cover Plate At Stringer And X-girders And Protection Screen Of Br. No. 294 Up (3x45.70m), Br. No. 293 Up & Dn (1x30.5m) & Br. No. 294 Dn (6x20.47m) And Provision Of Side Pathway At Br. No. 294 Dn (6x20.47m) On Sre-umb Section Of Umb Division Under Axen/bl/umb.

Tender Id: DCE-BL-20-2024-BRIDGE-WSHOP-GKP-ENGINEERING/NORTH EASTERN RLY | Conducting Uas (drone) Based Visual Inspection Of Br. No. 97 (19x24.4m Pg) In Lucknow Division, Br. No. 137 Dn (13x30.5m Owg) In Varanasi Division & Br No. 270 (8x30.5m Owg) In Izzatnagar Division Of N.e. Railway.