Tenders of Bgis Pwgsc Rp1

Evcs National Program - Design And Contract Administration

Decommission And Clear Out Abandoned Kitchen And Elevator

Door Replacement - Construction Services

The Project Aims To Provide A Long-term Solution That Repairs The Deficiencies In The Existing Identified Fire Separations Located Throughout Each Level In Accordance With The National Fire Code Of Canada – 2015 Section 2.2 Fire Separations. This Section States That Where Fire Separations Are Damaged And The Integrity Of Their Fire-resistance Rating Is Compromised, They Are Required To Be Repaired To Maintain The Integrity Of The Fire Separation. The Existing Fire Separations Are Also Not Compliant With The National Building Code 2015 And National Fire Code - 2015 As Per Section 3.3 Safety Within Floor Areas (nbc 2015). Fire Separations Help To Protect Occupants Within The Building And Is Also A Method For Protecting Buildings From The Spread Of Fire Into Adjoining Areas For Designated Time Periods.

Evcs National Program-design And Contract Administration-pacific Region (fmz1&2)

Kk09 - Building Exterior Cladding Upgrades

Evcs National Program-design And Contract Administration-pacific Region (fmz3&8)

On-Demand Preventative Roof Maintenance Services at the Complex

Remove And Replace Parking Access, Control, And Payment System. Refer To Plans And Specifications For Details.  

Replace Labels to Present the Correct Information and Correct Contradictions Between Nameplates. Replace Double 225a Panels With 400a, Or 600a Panels Where Possible To Take Future Needs Into Account. In the electrical room on level A, replace the Ppd-00a1 fuse panel with a new circuit breaker panel taking up less space than the existing one with smaller and stricter dimensions. The installation must be done so as not to conflict with the equipment installed on the back wall. In the electrical room on level A, the P-00a4 panel must be moved outside the electrical room as it conflicts with the wall and a magnetic starter. The New Location Will Be Near The Electrical Room. It is therefore necessary to relocate the wall, the door and the starter. The Contractor must carry out an Arc Flash Study at the end of the work and a Protection/Coordination Study of the Circuit Breakers.