Tenders of Bgis Pwgsc Rp1

This Project Addresses The Need To Replace Aging Infrastructure And Upgrade The Tenant Emergency Power Distribution System And To Ensure Compliance With Current Codes And Standards. The Existing Indoor Diesel Generator, Installed In The Late 1990’s, Is Currently At Its Maximum Electrical Loading And Is Due To Be Upgraded. The Proposed Solution Is To Install A Single 1.75 Mw (1,759 Kva) Standby Generator. This Generator Will Serve The Tenant Emergency Power Needs. The Project Scope Includes The Removal Of Outdated Electrical Infrastructure Including But Not Limited To Tenant-owned Electrical Switchgear And Distribution Equipment. This Project Will Install The New Generator, Exterior Pad Mount Fuel System, New Electrical Switchgear And Distribution Equipment.

Esdc Front End Re-fit Bridgewater

Goc5135352-ct-rfpq - The Proposed Project Is Renovation To An Existing Classified Waste Room. This Includes Removing The Existing Disintegrator Supplying And Installing A New One As Well As Updates To The Duct Work Accordingly.

Scope Of Work/overview: Need To Have Air Exhaust System Put In Room 117b To Account For New Room Going In. Consultant To Determine Room Load Calculations And Determine If Exhaust Fan Is Capable Of Providing Sufficient Cooling. If Exhaust Fan Is Not Sufficient For Room Load, Consultant To Determine Size Of Cooling System To Be Installed And Include In Scope Of Work. The Intent Of This Project Is To Provide Cooling To The New Server Space. There Is An Existing Room 117b Which Is Getting Converted To A Server Room And Therefore Is In Need Of Cooling. The Consultant Shall Carry Out A Detailed Investigation And Determine If An Exhaust Fan Would Be Adequate For The Cooling Load Or If A Separate Cooling Unit Would Be Needed To Cool The New Server Space. The Consultant Is To Provide The New Cooling Equipment Along With All Related Systems, Controls And Connections. Scope Of Work/overview: Need To Have Air Exhaust System Put In Room 117b To Account For New Room Going In. Consultant To Determine Room Load Calculations And Determine If Exhaust Fan Is Capable Of Providing Sufficient Cooling. If Exhaust Fan Is Not Sufficient For Room Load, Consultant To Determine Size Of Cooling System To Be Installed And Include In Scope Of Work. The Intent Of This Project Is To Provide Cooling To The New Server Space. There Is An Existing Room 117b Which Is Getting Converted To A Server Room And Therefore Is In Need Of Cooling. The Consultant Shall Carry Out A Detailed Investigation And Determine If An Exhaust Fan Would Be Adequate For The Cooling Load Or If A Separate Cooling Unit Would Be Needed To Cool The New Server Space. The Consultant Is To Provide The New Cooling Equipment Along With All Related Systems, Controls And Connections. Scope Of Work/overview: Need To Have Air Exhaust System Put In Room 117b To Account For New Room Going In. Consultant To Determine Room Load Calculations And Determine If Exhaust Fan Is Capable Of Providing Sufficient Cooling. If Exhaust Fan Is Not Sufficient For Room Load, Consultant To Determine Size Of Cooling System To Be Installed And Include In Scope Of Work. The Intent Of This Project Is To Provide Cooling To The New Server Space. There Is An Existing Room 117b Which Is Getting Converted To A Server Room And Therefore Is In Need Of Cooling. The Consultant Shall Carry Out A Detailed Investigation And Determine If An Exhaust Fan Would Be Adequate For The Cooling Load Or If A Separate Cooling Unit Would Be Needed To Cool The New Server Space. The Consultant Is To Provide The New Cooling Equipment Along With All Related Systems, Controls And Connections. Anticipated Award Date: June 13, 2025 Anticipated Construction End Date: March 13, 2026

Contractor - Repair Roof Membrane Under Hvac Unit

Consultant-install 2nd Fire Exit Door And Relocate Basement Service Room Door

The Project Site, Covering Approximately 75m², Aims To Provide A Functional And Secure Environment For Essential Operations. The Construction Will Include A Vestibule For Secure Access, An Inspection Corridor To Facilitate Easy Movement, A Mechanical Room To House Necessary Equipment, One Office For Administrative Purposes, And Space For Two Workstations To Accommodate The Operational Needs Of The Site.

Full Replacement Of Existing Deteriorated Asphalt Shingles, On The Multi-elevation Roof Assembly, Is Required At The Rcmp Detachment. The Intent Of The Project Is To Protect The Integrity Of The Structures & Mitigate The Risk Of Future Damage To Interior Finishes. Supply All Materials & Labour Necessary For New Main Building Roof. Scope Includes: Remove/strip Existing Shingles, Including Fasteners & Roofing Membrane. Inspect Eaves & Fascia For Replacement & Inspect Sheathing After Removal Of Existing Shingles. Ensure Surface Is Firm & Dry, Without Ridges, Warps Or Voids & Properly Fastened. Any Damaged Sheathing Is To Be Identified During Demolition & Bgis Project Manager To Be Notified Immediately In Order To Secure Approval To Replace Damaged Sheathing. Replace Missing 'h' Clips As Necessary. Vent Pipes & Other Accessories Projecting Through The Roof Must Be In Place & Appropriate Roof Flashings Installed Prior To Shingling. Installation Of Full Waterproof Underlayment (ice And Water Shield) Is To Be Performed Over The Entirety Of All Roof Surfaces Prior To Shingling Occurs (as Per Client Request). New Asphalt Shingles To Match As Closely As Possible With Existing. At Eaves, Use A Starter Course Of Shingles, Tabs Reversed, Overhang 1/2". Install Ridges & Roof Vents Prior To Shingling And Nail As Per Manufacturer's Directions. Shingles To Be Architectural Style, Individually Tabbed Strip Shingle, Mineral Surfaced Asphalt With Fiberglass Felts Having A 30 Year Manufacturer's Warranty At A Minimum. Eavestrough And Downspouts In Good Condition. Contractor Responsible To Ensure Existing Heat Trace Is Removed Prior To Construction And Re-installed After Construction.

Consultant-phased Parking Lot Resurfacing & Electrical Conduit Replacement Study

Cbsa Has A Standard Pil Design, That Was Provided To The Prime Consultant. The New Pil Booths Include Two Exits And Are A Bi-level Design To Process Higher Vehicles, Such As A Semi-truck. The Pil Booths Include Workstations On Both Levels, With The Ability To Sit At The Workstations. The Existing Canopy And Pil Booths Need To Be Demolished To Provide Room For The New Pil Booths And Canopy.