Battery Tenders

Details: Description 1. The Municipality Of Consolacion, Through The General Fund Intends To Apply The Sum Of Two Million Five Hundred Thousand Pesos (p 2,500,000.00) Being The Abc To Payments Under The Contract For Procurement Of Props, Materials And Lights For Sinulog Festival 2025. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Municipality Of Consolacion Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By 5cd. Bidders Should Have Completed, Within Five (5) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non- Discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. The Awarding Of The Contract To The Winning Bidder Will Take Place When The Funds Are Available (short Of Award). 5. Prospective Bidders May Obtain Further Information From The Bac Office Of The Municipality Of Consolacion And Inspect The Bidding Documents At The Address Given Below During Mondays To Fridays From 8:00am To 5:00pm. 6. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 6, 2024 To January 2, 2025 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos (p 5,000.00). 7. The Municipality Of Consolacion Will Hold A Pre-bid Conference On December 16, 2024 At 3:00 O’clock In The Afternoon At The Bac Office Located At The 4th Floor, Municipal Building, Poblacion Oriental, Consolacion, Cebu, Which Shall Be Open To Prospective Bidders. 8. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before 10:00 O’clock In Morning, January 2, 2025. Late Bids Shall Not Be Accepted. 9. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 10. Bid Opening Shall Be On January 2, 2025 At 10:00 O’clock In Morning At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 11. The Municipality Of Consolacion Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Jakhelene C. Tubin Bac Office 4th Floor, Municipal Building Poblacion Oriental, Consolacion, Cebu 268-3736/232-0392 Consolacionbac@gmail.com 13. You May Visit The Following Websites: For Downloading Of Bidding Documents: A. Lguconsolacion.gov.ph Or B. Philgeps Website Atty. Paolo Crispino C. Sucalit Bac Chairperson 888 Greco (super Glue) 9 Box Acrylic Emulsion 10 Gal Adjustable Wrench Small 6 Pc Airbrush 1 Pc Airfoam 50 Pc Angle Bar 1/4 X 1 1/2 60 Pc Angle Bar 3/16 X 1 1/4 60 Pc Canvass Cloth 100meters / Roll 1 Roll Clear Gloss 6 Gal Colored Latex 1/4 - Burnt Sienna 40 Can Colored Latex 1/4 - Hansa Yellow 40 Can Colored Latex 1/4 - Lamp Black 40 Can Colored Latex 1/4 - Raw Sienna 40 Can Colored Latex 1/4 - Thalo Blue 40 Can Colored Latex 1/4 - Thalo Green 40 Can Colored Latex 1/4 - Tolondine Red 40 Can Colored Latex 1/4 - Venetian Red 40 Can Common Nail 1 1/2 8 Kilo Common Nail 2 1/2 8 Kilo Compressor Hose #1/4 80 Meter Cutoff Disc 10 Box Cutter Blade Nt Japan (big) 20 Pc Cutter Blade Nt Japan (small) 20 Pc Cutter Blade Refill (big) 20 Box Cutter Blade Refill (slanting) 20 Box Cutting Disc (25pcs. / Box) 10 Box Electric Rod Holder 300a 3 Pc Electrical Tape (3m, Black) 10 Pc Eterna Brush (assorted) 25 Pc Expanding Foam Spray 20 Pc Extension Wire #20 70 Meter Female Plug 6 Pc Festival Trimmings 20 Roll G.i Pipe #1 (s40) 30 Pc G.i Pipe #1 1/2 (s40) 30 Pc Glue Gun (heavy Duty) 10 Pc Glue Stick 3000 Pc Good Lumber 1x2x8 40 Pc Gun Tacker (heavy Duty) 2 Pc Hacksaw Blade 16 Pc Hammer Small 10 Pc Insulator Foam 10mm (plain) 2 Roll Insulator Foam 5mm (plain) 2 Roll Insulator Foam With Silver 1 Roll Lacquer Thinner 6 Gal Latex Flat White 8 Pail Lucban #3mm 70 Pc Lucban #6mm 70 Pc Madrigal Gold 2 Roll Male Plug 5 Pc Masking Tape #1 20 Roll Non-sag Epoxy 2 Gal Nylon #90 3 Kilo Organza Cloth 1 Roll Paint Brush 15 Pc Paint Tray 8 Pc Peacock Powder 10 Can Pencil 2 6 Box Permanent Marker (red) 9 Box Philip Screwdriver 5 Pc Plug (heavy Duty) 6 Pc Plywood Marine 1/4 60 Pc Plywood Marine 3/4 20 Pc Pvc #4 5 Pc Roller Brush 10 Pc Royal Cord #16/2c (50 Meters / Roll) 2 Roll Rubber White 4mm 41 Pc Rugby Greco 50 Gal Scissor 10 Pc Velvet Cloth (100m/roll) 1 Roll Sequence Cloth (gold) (100m/roll) 2 Rolls Sequence Cloth (white) (100m/roll) 1 Roll Skim Coat 2 Sack Socket Outlet (3 Gang) 4 Pc Spray Gun K3 (lotus) 7 Pc Steel Bar 10mm 55 Pc Steel Bar 12mm 40 Pc Steel Bar 9mm 65 Pc Steel Caster Wheel #4 (heavy Duty) 250 Pc Steel Caster Wheel #5 (heavy Duty) 240 Pc Styro Foam #4 50 Pc Tecs Screw #1 1/2 (1,000 Pcs/box) 7 Box Tecs Screw #3/4 (1,000 Pcs/box) 7 Box Tie Wire #16 16 Kilo Unihard Foam #2 55 Pc Urethane Paint White 5 Gal Urethane Thinner 5 Gal Welding Gloves 10 Pair Welding Rod (6013, 2.5mm) - 10kg/box 10 Box Lights Controller 12v Receiver 22 Set 2.4g Sender 2 Set 12v Ic Chips 105 Unit Segmental Software 2 Set Battery Aa (2pcs/pack) - Heavy Duty 500 Pack

Details: Description Republic Of The Philippines City Of Canlaon Office Of The Bids And Awards Committee Invitation To Bid For The Improvement Of Plaza The Local Government Of Canlaon City, Through The Aip 2023, Ord. No. 116, Series Of 2024 Intends To Apply The Sum Four Hundred Twenty-four Thousand, Twenty & 42/100 (p424,020.42) Being The Abc To Payments Under The Contract For The Supply And Delivery Of Various Construction Materials For Use In The Improvement Of Plaza, Purok Rose A, Brgy. Malaiba, Canlaon City. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. The Local Government Of Canlaon City, Now Invites Bids For The Supply And Delivery Of Various Construction Materials For Use In The Improvement Of Plaza, Purok Rose A, Brgy. Malaiba, Canlaon City. Delivery Of The Goods Is Required 7 Calendar Days After Issuance And Receipt Of Notice To Proceed. Bidders Should Have Completed, Within Ten Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The 2016 Revised Irr Of Ra No. 9184 Interested Bidders May Obtain Information For The City Government Of Canlaon City Thru The Office Of The Bids And Awards Committee And Inspect Bidding Documents During Office Hours (8:00am To 5:00pm), Monday To Friday. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders Starting On December 11, 2024 To January 2, 2025 Until 10:00 Am At The Office Of The Bids And Awards Committee, Canlaon City, And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred (p500.00) Pesos. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees By Facsimile. Bids Must Be Received By The Bac Secretariat Through Manual Submission On Or Before January 2, 2025, 10:00 Am At The Office Of The Bids And Awards Committee, 2nd Floor, City Hall Building, Canlaon City. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. Bid Opening Shall Be On January 2, 2025, 10:00 Am At The At The Office Of The Bids And Awards Committee 2nd Floor, City Hall Building, Canlaon City. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. For The Purpose Of Constituting A Quorum, Either The Physical And Virtual Presence Of The Bac Member Shall Be Considered Pursuant To Gppb Resolution No. 09-2020. The Local Government Unit Of Canlaon Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Alice D. Mcguiggan Bac Secretariat Mobile No. 0917-561-7931 Email Address: Bacofficelgucanlaon@yahoo.com Date Of Posting: December 10, 2024 Zosilito A. Ongco Bac Vice-chairman Republic Of The Philippines City Of Canlaon Bids And Awards Committee Control No.: #1 Bid Form Name Of Project: Improvement Of Plaza Brief Description: Supply And Delivery Of Various Construction Materials Location: Purok Rose A, Brgy. Malaiba, Canlaon City Bill Of Quantities Stock No. Quantity Unit Of Issue Item Description Unit Cost Unit Cost Total Cost 1. 3 Shts. ¼'' X 4' X 8' , Plywood, Marine 547.00 2. 10 Pcs. 1.0mm Thick 2"x4" Gi C-purlins 875.00 3. 2 Pcs. 10mm Thick X 150mm X 150mm Steel Plate 300.00 4. 1 Pc. 10mm X 100mm X 100mm Angular Bar 9,200.00 5. 12 Lngths 10mmɸ X 6m Deformed Bars 238.33 6. 8 Pcs. 12mm Thick X 100mm X 200mm Steel Plate 270.00 7. 12 Lngths 12mmɸ X 6m Deformed Bars 333.33 8. 2 Pcs. 14"φ Cutting Disc For Cut-off 578.00 9. 2 Pcs. 16mmɸ Def. Bar 591.00 10. 16 Pcs. 16mmφ X 400mm Long Anchor Bolts With Nuts And Washers, Ks 300.00 11. 4 Pcs. 20mm Thick X 300mm X 300mm Baseplate With 4-18mmφ Drill Hole Near At 4 Corner 3,500.00 12. 4 Pcs. 3"φ Gi Pipe Sch. 40 3,805.00 13. 120 Bd. Ft. 36 - 2'' X 2'' X 10 ' , Lumber, Rough 55.00 14. 1 Pc. 4"φ Grinding Stone 317.00 15. 12 Pcs. 4"φ Cutting Disc 200.00 16. 1 Gal. Aluminum Paint, Enamel 1,251.00 17. 41 Cu.m Crushed Gravel ¾'' 2,378.00 18. 1 Kg. Cw Nails, #1½ 100.50 19. 2 Kgs. Cw Nails, #3 91.50 20. 3 Kgs. Cw Nails, #4 126.00 21. 2 Gals. Latex Paint, Gloss White 1,067.00 22. 11 Kgs. E6013 Welding Rod 2.40mmφ Wipweld, Ordinary 176.00 23. 21 Cu.m Fine Sand 1,348.00 24. 2 Kg. Ga.16 Gi Tie Wire 103.00 25. 4 Pcs. Lamp Bracket For Steel Pole Mounting, 50 Mm ɸ X 1.6 M, 3 Mm Thick, Galvanized Coated 4,000.00 26. 1 Gal. Mayon Laquer Thinner 782.00 27. 4 Pcs. Paint Brush 2" 52.00 28. 375 Bags Portland Cement 310.00 29. 2 Ltrs. Red Lead Paint 300.00 30. 1 Gal. Reflectorized Traffic Paint, White 1,650.00 31. 1 Gal. Reflectorized Traffic Paint, Yellow 1,650.00 32. 4 Sets Solar Panel, 12v, 80 - 100 W, 665 Mm Length X 500 Mm Width X 13 Mm Thick Complete With Bracket Frame And Safety Clip, Mppt Charger With Driver & Dc Cable 5,000.00 33. 4 Sets Solar Street Lamp, 60w, 12 - 18 V Dc, Warm White, Smd 150 - 175 Lm / Watt, Complete W/ Lithium Ferro Phosphate (lifepo₄) Battery, 170 Wh Minimum, Mppt Charger W/ Driver, Pir Sensor ( Built-in ), Aluminum Die-cast And Polycarbonate Cover 15,000.00 Total Brand Model:_____________ Delivery Period:______________________ Warranty: After Having Carefully Read & Accepted Your General Conditions. I/we Quote On The Item/s Price/s Noted Above. Total Bid Price (in Words) Bid Security: Amount: Submitted By: Bidder/supplier Date:_________________________

Description: Estimated Quantity Contract To Be Delivered As And When Required For The Period Indicated At The Request Of The Department. Quantities Or Dollar Values Stated Are An Estimate Made In Good Faith And May Vary Considerably. The Province Of N.b. Reserves The Right To Purchase More Or Lesser Amounts Depending On Requirements. Bidders Are Requested To Include Specifications On Product Quoted With The Bid. This Procurement Is Subject To The Provisions Of The Canadian Free Trade Agreement And The Canada-european Union Comprehensive Economic And Trade Agreement. Unless Indicated Otherwise In This Tender Notice Or Attached Documents, All Prices Must Be Extended And Totalled. Where Permissible Under The Applicable Trade Agreements And The Regulation Under The Procurement Act, Service New Brunswick Reserves The Right To Give Preferential Treatment To A Prospective Supplier From New Brunswick. Should This Right Be Exercised, The Following Order Of Priority Will Apply: A) Firstly, New Brunswick Manufacturers If The Goods To Be Procured Are Manufactured In New Brunswick; And B) Secondly, New Brunswick Vendors. When Bid Submissions Are Evaluated On Price: - Applicability Of The Preferences Will Be Determined Based On The Price Differential Between The Lowest-priced Acceptable Bid And The Bid Receiving The Preferential Treatment. - The Price Differential Under Which A Nb Supplier Preference May Be Applied Will Vary Between 2.5% And 10% Depending On The Total Estimated Value Of The Procurement, In Accordance With The Ranges Set Out In The Regulation Under The Procurement Act. - The Preferential Treatment Will Be Applied By Making The Award To The Nb Supplier. When Bid Submissions Are Evaluated On A Point System: - Applicability Of The Preferences Will Be Determined Based On The Price Differential Between The Pricing Component Of The Highest Scoring Acceptable Bid Submission And The Pricing Component Of The Bid(s) Receiving The Preferential Treatment. - The Price Differential Under Which A Nb Supplier Preference May Be Applied Will Vary Between 2.5% And 10% Depending On The Total Estimated Value Of The Procurement, In Accordance With The Ranges Set Out In The Regulation Under The Procurement Act. - The Preferential Treatment Will Be Applied By Allotting A Maximum Of An Additional 5% Of The Total Possible Points To New Brunswick Manufacturers' Total Scores And 4% To Nb Vendors' Total Scores. If No Bid From A New Brunswick Manufacturer Has Been Retained For Preferential Treatment, New Brunswick Vendors May Receive A Maximum Of An Additional 5% Of The Total Possible Points Rather Than 4%. The Decision To Apply A Preference Will Be At The Sole Discretion Of Service New Brunswick. To Be Eligible, Suppliers Must Meet The Definition Of Nb Supplier As Identified By The Regulation Under The Procurement Act. Nb Manufacturers Should Indicate In Their Bid That They Are A Nb Manufacturer To Be Considered For The Nb Manufacturer Preference. Holiday Season Office Closure The Strategic Procurement Division Of Service New Brunswick (located At 300 St. Mary's Street) Will Be Closed For The Holiday Season. This Includes All Strategic Procurement Operations (except Strategic Procurement - Health), The Reception Area And The Central Tendering Office. The Closure Period Is From 12 P.m. On December 24, 2024 To 8:15 A.m. On January 2, 2025. The New Brunswick Opportunities Network (nbon) Will Be Accessible Throughout This Period, However Please Note Support (helpline And Email Queries) Will Not Be Available During This Time. New Brunswick Manufacturer Preference By Stating Yes In The Input Box, I Confirm That I Am A Manufacturer Of Goods With A Place Of Business In New Brunswick As Defined Below And Am Therefore Eligible To Be Considered For The Nb Manufacturer Preference As Defined In This Solicitation Document. If The Input Box Is Left Incomplete The Bid May Be Ineligible For The New Brunswick Manufacturer Preference. Place Of Business Means An Establishment Where A Manufacturer Regularly Conducts Its Activities On A Permanent Basis, Is Clearly Identified By Name And Is Accessible During Normal Business Hours. New Brunswick Vendor Preference By Stating Yes In The Input Box, I Confirm That I Am A Vendor Of Goods Or Services With A Place Of Business In New Brunswick As Defined Below And Am Therefore Eligible To Be Considered For The Nb Vendor Preference As Defined In This Solicitation Document. If The Input Box Is Left Incomplete The Bid May Be Ineligible For The New Brunswick Vendor Preference. Place Of Business Means An Establishment Where A Vendor Regularly Conducts Its Activities On A Permanent Basis, Is Clearly Identified By Name And Is Accessible During Normal Business Hours. Compressors And Vacuum Pumps Scope The Department Of Natural Resources And Energy Development Is Looking To Establish An Estimated Quantity Contract For Slid In Fire Skid An As And When Required Basis. This Contract Will Be In Place From Contract Award To December 31, 2025, With The Option To Renew For Two (2) Additional One (1) Year Terms. Option Year Pricing Pricing Will Be Subject To Negotiation Of A Satisfactory Contract Price Not To Exceed The Tendered Price Plus Any Published Increase In The New Brunswick Consumer Price Index (cpi). If A Mutually Agreed Upon Price Cannot Be Reached Gnb Reserves The Right To Re-tender, Re-award Or Delete The Item(s) In Question. Specification Items Must Meet Or Exceed The Specifications In The Attached Documents. The Province Will Purchase And Supply A Waterax Bb-4-23h Pump And Control Panel For Each Unit To The Successful Bidder. Connector Must Be Supplied To Connect The Pump To The Truck Battery So That It Can Easily Be Disconnected From The Truck For Maintenance. 150ft Of Rubber Hose (non-collapsible) On The Reel Must Be Included. Bidders Are Requested To Provide Detailed Specifications On The Product Being Bid With The Tender Submission. Contract Award Criteria This Tender Will Be Awarded Based On The Overall Lowest Compliant Bid Which Meets The Required Specifications And Consideration Of Other Cost Savings Incentives, Which Ever Provides The Best Overall Value To The Province Of New Brunswick. (best Overall Value Will Be Determined At The Sole Discretion Of Gnb And All Decisions Are Final.) How To Submit Pricing Vendors Are Invited To Submit Their Unit Price--the Price For A Single Product Within The Tender Item--under The 'unit Price Including Discount' Column. Vendors Should Then Multiply Their Unit Price By The 'quantity/unit' To Calculate The 'extended Price'. The 'unit Price Including Discount' And 'extended Price' Should Not Include Taxes. When Stating "unit Price," Vendors Must Include Delivery To The Shipping Address Detailed Above. The Bid Price Must Include Any Additional Costs And/or Charges That May Apply. All Prices Must Be Fob Destination, Freight Prepaid. Do Not Include Any Sales/hst Taxes In The Prices Quoted In The Tender Document. Delivery And Price Vendor(s) Are To Deliver The Goods To The Addresses Detailed Above Upon Receipt Of An Official Release Against This Contract. Vendor Questions All Inquiries Should Be Received Seven (7) Calendar Days Prior To The Closing Date; Any Inquiries Received Less Than 7 (seven) Calendar Days Prior To The Closing Date Cannot Be Guaranteed A Response. Please Reference The Tender Number And Closing Date Within Your Communications To Ensure A Prompt And Accurate Reply. Requirements Vendors Are Required To Sign And Date Their Bid In The Space Provided Below. This Is A Tender Notice Only. In Order To Submit A Bid, You Must Obtain Official Tender Documents From The New Brunswick Opportunities Network, Another Authorized Tendering Service Or As Indicated In The Tender Notice. Solicitation Documents Will Be Provided In Either Of The Province Of New Brunswick's Two Official Languages; English Or French Upon Request. Instructions For Bid Submission 1. Effective April 15, 2020, Service New Brunswick Is No Longer Accepting Paper Bids, And The Central Tendering Branch Is Closed To The Public. Public Tender Openings Are No Longer Taking Place; However, Results Continue To Be Posted On Nbon. 2. Bids Will Only Be Accepted By Electronic Transmission As Follows: A. By E-bidding Through Nbon (when E-bidding Is Possible); Or B. By Fax To: (506) 444-4200 (fax To Dedicated Mailbox). Note: Proposals In Response To A Request For Proposals (rfp) Will Not Be Accepted By Fax; Or C. By Email To Nbbids@snb.ca Or Soumissionsnb@snb.ca (do Not Submit Bids To Any Other Email). Click Here Instructions For Bid Submission For Important Instructions On How To Submit Bids By Email. D. Please Refrain From Submitting Your Bid Through Multiple Electronic Channels To Avoid Duplicate Bids. 3. All Bids Must Be Properly Signed By An Authorized Person. A. For Bids Submitted By Email Or Fax: Typed Signatures (in Any Font) That Are Not On The Bid Itself (i.e. In The Body Of The Email Or On The Fax Cover Sheet) Will Not Be Accepted. 4. All Bids Must Be Legible, Properly Completed And Contain The Proper Solicitation Number. 5. The Proponent Is Solely Responsible For Ensuring That The Bid Submission In Its Entirety, Including All Attachments, Is Received Before Closing Date And Time As Indicated On The Solicitation Documents. A. The Proponent Bears All Risk Associated With Delivering Its Bid By Electronic Submission, Including But Not Limited To Delays In Transmission Between The Proponent's Computer And The Province's Electronic Mail System, Nbon Or Fax. B. The Date And Time Of Official Receipt Of The Bid Will Be The Time Of Receipt Recorded In The Nbon System (for E-bids) Or The Time Of Receipt In The Province's Electronic Mail System (for Fax And Email Bid Submissions). 6. All Bids Must Be Stated In Canadian Funds. Sales Taxes Should Not Be Included In The Unit, Extended Or Total Prices. 7. All Tenders Must Be F.o.b. Destination, Freight Prepaid. 8. This Invitation Is Being Conducted Under The Provisions Of The Procurement Act And Regulation 2014-93 As Of The Date Of The Issuance Of The Invitation. Direct Deposit The Province Of New Brunswick Is Now Using Direct Deposit As The Standard Method Of Issuing Payments. Suppliers Are Required To Provide Bank Account Information And An Email Address For The Notice Of Remittance. Please Send The Completed Direct Deposit Form To Service New Brunswick (e-mail Address And Mailing Address Are Indicated On The Form). Please Click On The Link Below To View The Direct Deposit Form. Https://www2.snb.ca/content/dam/snb/procurement/directdepositvirementdirect.pdf A Bidder Must Obtain Official Solicitation Documents From A Distribution Service, Authorized By The Minister Of Service New Brunswick, In Order To Submit A Bid. The Current Authorized Distribution Services Are The New Brunswick Opportunities Network (nbon) (operated By Service New Brunswick, Province Of Nb), Bidsalert (operated By Tendering Publications Ltd.) And Merx (operated By Mediagrif Interactive Technologies). Bids Should Be Submitted On The Official Bid Documents Obtained From These Authorized Distribution Services. The Province Of New Brunswick Reserves The Right To Negotiate Pricing, Value Added And Other Savings Opportunities With The Successful Proponent At Time Of Award And Throughout The Contract. All Suppliers Engaged To Deliver Services On Behalf Of The Government Of New Brunswick Must Ensure Compliance With The Official Languages Act In The Delivery Of Those Services. For More Information, Please Refer To The Official Languages Act. The Atlantic Provinces Standard Terms & Conditions For Goods And Services Apply To This Procurement And Are Considered To Be Incorporated Into This Document. By Submitting A Bid, You Agree And Accept These Terms And Conditions. Current "atlantic Provinces Standard Terms And Conditions" Are Available On The New Brunswick Opportunities Network, The Council Of Atlantic Premiers' Website Or From An Authorized Service Provider. Covid-19 Restrictions For Workers Entering New Brunswick All Suppliers And Workers Entering The Province Of New Brunswick For Work Purposes Must Comply With The Requirements Established By Worksafe Nb And Public Health, Including Isolation Requirements Where Applicable. Click Here For More Information On These Requirements. Questions: Written Questions Relating To This Opportunity May Be Submitted To The Address Provided Below Via Email By Clicking On Questions. Please Be Sure To Include The Solicitation/tender Number In The Subject Line. Email Address: Bidquestionssoumissions@snb.ca Note: This Email Account Is Strictly For The Receipt Of Questions On Open Opportunities. This Email Is Not For The Submission Of Bids. Covid-19 Supplier Vaccination Policy Suppliers Must Comply With All Gnb Health And Safety Policies And Standards Including, Without Limitation, All Health And Safety Policies And Standards Related To Covid-19, As Applicable. Go To Www.gnb.ca/nbon To View The Full Policy And Faqs. Under Canadian Law (and International Agreements), Your Bid Must Arrive Separately And Independently, Without Conspiracy, Collusion Or Fraud; See Http://www.competitionbureau.gc.ca/eic/site/cb-bc.nsf/eng/home For Further Information. Pay Equity Does Your Organization Have 50 Or More Employees? The Government Of New Brunswick Is Committed To Encouraging And Incentivizing The Adoption Of Pay Equity By Employers Doing Business With Government. Prior To The Award Of Procurements For Goods And Services Valued Over $1,000,000, Suppliers, With Fifty (50) Or More Employees Will Be Required To Complete The Pay Equity Learning Module Developed By The Women's Equality Branch. Suppliers Should Provide A Copy Of Their Certificate Of Completion With Their Bid Submission. To Complete The Online Module And Obtain Your Certificate, Please Visit Www.gnb.ca/payequity. For Questions, Please Contact The Pay Equity Bureau Toll Free: (877) 253-0266 Or By Email: Peb-bes@gnb.ca. All Discounts Quoted Will Be Considered To Be Without Limitations. Award Of Contracts: No Contract Shall Be Awarded And No Payment Shall Be Made To A Vendor Unless Authorized By The Minister Or His Delegates. The Minister May Make An Award To The Preferred Vendor Conditional On The Negotiation And Acceptance Of A Detailed Contract Between The Province And The Vendor. In Such Cases, Should The Detailed Contract Negotiations Not Be Completed In A Reasonable Period Of Time, The Province Reserves The Right To Discontinue Negotiations With The Vendor And Subsequently Enter Into Negotiations With The Second Preferred Vendor. No Right Or Duty, In Whole Or In Part, Of The Vendor Under A Contract Issued May Be Assigned Or Delegated Without The Prior Consent Of The Strategic Procurement Branch. Unless Indicated Otherwise In This Tender Notice Or Attached Documents, All Prices Must Be Extended And Totalled. All Suppliers Engaged To Deliver Goods Or Services To The Government Of New Brunswick Must Ensure Compliance With The Designated Materials Regulation In The Provision Or Delivery Of Those Goods Obligated Under That Regulation. Please Refer To Recycle Nb's Website And The Designated Materials Regulation For Specifics. Payment Of Invoices Payment Of Invoices Is The Responsibility Of The Department Or Organization To Whom The Goods Are Shipped Or Services Are Supplied. Where The Estimated Value Of The Goods Or Services To Be Procured Is Below The Lowest Applicable Threshold Value Of Any Relevant Trade Agreement, Service New Brunswick Reserves The Right To Give Preferential Treatment To A Prospective Supplier From New Brunswick. Should This Right Be Exercised, The Following Order Of Priority Will Apply: A) Firstly, New Brunswick Manufacturers If The Goods To Be Procured Are Manufactured In New Brunswick; And B) Secondly, New Brunswick Vendors. When Bid Submissions Are Evaluated On Price: - Applicability Of The Preferences Will Be Determined Based On The Price Differential Between The Lowest-priced Acceptable Bid And The Bid Receiving The Preferential Treatment. - The Price Differential Under Which A Nb Supplier Preference May Be Applied Will Be Limited To 10%. When The Lowest-priced Acceptable Bid Before Preferential Treatment Is Applied Is A New Brunswick Vendor, The Price Differential Under Which A Nb Manufacturer Preference Will Be Applied Will Be Limited To 5%. - The Preferential Treatment Will Be Applied By Making The Award To The Nb Supplier. When Bid Submissions Are Evaluated On A Point System: - Applicability Of The Preferences Will Be Determined Based On The Price Differential Between The Pricing Component Of The Highest Scoring Acceptable Bid Submission And The Pricing Component Of The Bid(s) Receiving The Preferential Treatment. - The Price Differential Under Which A Nb Supplier Preference May Be Applied Will Be Limited To 10%. When The Highest Scoring Acceptable Bid Submission Before Preferential Treatment Is Applied Is A New Brunswick Vendor, The Price Differential Under Which A Nb Manufacturer Preference Will Be Applied Will Be Limited To 5%. - The Preferential Treatment Will Be Applied By Allotting A Maximum Of An Additional 5% Of The Total Possible Points To New Brunswick Manufacturers' Total Scores And 4% To Nb Vendors' Total Scores. If No Bid From A New Brunswick Manufacturer Has Been Retained For Preferential Treatment, New Brunswick Vendors May Receive A Maximum Of An Additional 5% Of The Total Possible Points Rather Than 4%. The Decision To Apply A Preference Will Be At The Sole Discretion Of Service New Brunswick. To Be Eligible, Suppliers Must Meet The Definition Of Nb Supplier As Identified By The Regulation Under The Procurement Act. Nb Manufacturers Should Indicate In Their Bid That They Are A Nb Manufacturer To Be Considered For The Nb Manufacturer Preference.

Details: General Statement: this Is A Combined Synopsis/solicitation For Commercial Items Issued By The Air Force Research Laboratory/pzleq, Wright-patterson Air Force Base, Ohio. This Announcement Constitutes The Only Solicitation Being Issued For The Requirement Described Herein. solicitation Information solicitation Number: Combo-afrl-pzleq-2025-0008 [x] Request For Quotation (rfq) [ ] Request For Proposal (rfp) [ ] Invitation For Bid (ifb) regulation Identification: this Solicitation And The Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular (fac) 2023-01 Effective 30 Dec 2022. notice Of Small Business Set-aside: set-aside Type small Business naics Size Standard 334517 listing/description Of Items: clin #: 0001 description narda Fieldman Broadband Meter And Four (4) Probes. the Vendor Shall Provide Four (4) Narda Fieldman Logging Broadband Field Meters With Three (3) Each Of The Following Probes: 1) Efd0391, 2) Efd5091, 3) Hfd0361, And 4) Hfd0191. The Narda Fieldman Meter And Probes Shall Possess The Following Salient Characteristics: the Detector Shall Possess The Following Specifications: shall Have Isotropic Probes To Cover 100khz To 60ghz shall Have Large Graphical Display shall Have Back Lit Monochrome Lcd; Readable Even In Bright Daylight shall Have Intelligent Probe Interface With Automatic Probe Parameter Detection shall Include Fully Automatic Zeroing shall Have Extensive Memory For Logging Of Up To 5000 Results shall Have Gps Interface And Mountable Receiver For Positioning Data Documentation (optional) shall Include Graphical User Interface (gui) shall Have Simple-to-use 9 Button Keypad shall Have Hold Button Soft Key For Freezing Measurement Display During Readings shall Have User Defined Setups Can Be Saved For Repetitive Survey Needs shall Have Keypad That Can Be Locked To Guard Against Inadvertent Inputs shall Have User Selectable Auto-off Feature To Save Battery Life shall Include 5 Types Of Results That Can Be Displayed: Actual, Minimum, Maximum, Average, Maximum Average history Mode Shall Operate Continuously In The Background, Allowing Display Of Past Readings At Any Time, Up To 8 Hours shall Include Selectable Units: V/m, A/m, W/m², Mw/cm², And % Of Standard When Using Shaped Frequency Response Probes shall Include Stored Standards And Guidance In The Nbm Memory Allow Simultaneous Display Readings As % Of Standard If Frequency Is Known shall Include Data Memory For Up To 5000 Measurements shall Have Time Averaging: 4 Seconds To 30 Minutes, In 2-second Intervals shall Have Variable Alarm Threshold Setting shall Have Audible Indication Of Increasing Or Decreasing Field Strength shall Include Automatic Detection Of Probe Type And Calibration Information shall Be Fully Automatic And Variable Zero Adjustment Interval Times shall Include Additional Optical Input For Separating Probe From Meter shall Have Pc Connection Via Usb Or Optical Interface shall Have Trigger Input For Externally Initiating Readings To Be Taken shall Include Nbm-ts Software Enables Remote Controlled Measurements shall Be Able To Have Screenshots That Can Be Downloaded To Pc delivery Information: fob: [x] Destination [ ] Origin place Of Delivery: 711 Hpw/oml attn: Brandi Tschuor 2510 Fifth St., Bldg. 840 wright-patterson Afb, Oh 45433 requested Date Of Delivery: 30 Days Upon Receipt Of Order instructions To Offerors: the Provision At Far 52.212-1, Instructions To Offerors – Commercial (jun 2020), Applies To This Acquisition. addenda: N/a evaluation Of Offers: the Provision At Far 52.212-2, Evaluation -- Commercial Items (oct 2014), Will Be Used To Evaluate Quotes Received. the Government Will Award A Contract Resulting From This Solicitation To The Responsible Offeror Whose Quote Conforming To The Solicitation Will Be Most Advantageous To The Government, Price And Other Factors Considered. the Following Factors Shall Be Used To Evaluate Offers: (lowest Price Technically Acceptable Or Price Trade-off) Pick Which One Matches (1) Price (2) Technical Acceptability (a) In Order For This Quote To Be Considered “technically Acceptable” It Must Meet: (i) All Specification Requirements In The Sow offerors Shall Assume That The Government Has No Prior Knowledge Of Its Facilities, Capabilities, And Experience And Will Base The Evaluation Solely On The Information Presented In The Offeror’s Proposal. the Government Reserves The Right To Award All, Some, Or None, Of The Items Listed In This Solicitation. The Government Reserves The Right To Resolicit If Results Garner Only One Qualifying Quote, If It’s Determined To Be In The Best Interests Of The Government. offeror Representations And Certifications: offerors Must Include A Completed Copy Of The Provision At Far 52.212-3, Offeror Representations And Certifications -- Commercial Items (feb 2021), With Your Quote. if Offeror Has Completed Annual Representations And Certifications In System For Award Management (sam), Then Only Paragraph (b) Needs To Be Submitted With Quote. if Offeror Has Not Completed Annual Representations And Certifications In Sam Then Paragraphs (c-v) Need To Be Submitted. contract Terms & Conditions: the Clause At Far 52.212-4, Contract Terms And Conditions -- Commercial Items (oct 2018), Applies To This Acquisition. addenda: N/a required Terms & Conditions To Implement Statutes Or Orders: the Clause At Far 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders -- Commercial Items (jan 2021), Applies To This Acquisition. the Following Clauses Are Incorporated Via Paragraph (b) And Considered Applicable To This Acquisition: far 52.219-6 notice Of Total Small Business Set Aside far 52.219-28 post Award Small Business Program Representation far 52.222-3 convict Labor far 52.222-19 child Labor-cooperation With Authorities And Remedies far 52.222-21 prohibition Of Segregated Facilities far 52.222-26 equal Opportunity far 52.222-50 combating Trafficking In Persons far 52.223-18 encouraging Contractor Policies To Ban Text Messaging While Driving far 52.225-1 buy American--supplies far 52.225-13 restrictions On Certain Foreign Purchases far 52.232-33 payment By Electronic Funds Transfer- System For Award Management additional Contract Requirements: (1) Offeror Shall Include All Warranty Requirements And Documentation With Quote. (2) Offerors Shall Identify How Long The Quote Is Valid. additional Provisions And Clauses Applicable To This Requirement: far 52.203-19 prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements provision far 52.204-7 system For Award Management clause far 52.204-13 system For Award Management Maintenance clause far 52.209-6 protecting The Government's Interest When Subcontracting With Contractors Debarred, Suspended, Or Proposed For Debarment clause far 52.232-39 unenforceability Of Unauthorized Obligations clause far 52.232-40 providing Accelerated Payments To Small Business Subcontractors clause far 52.246-16 responsibility For Supplies clause far 52.247-34 f.o.b. Destination provision far 52.252-1 solicitation Provisions Incorporated By Reference (fill-in Text) - Https://www.acquisition.gov/ clause far 52.252-2 contract Clauses Incorporated By Reference (fill-in Text) - Https://www.acquisition.gov/ clause dfars 252.203-7000 requirements Relating To Compensation Of Former Dod Officials clause dfars 252.203-7002 requirement To Inform Employees Of Whistleblower Rights provision dfars 252.203-7005 representation Relating To Compensation Of Former Dod Officials clause dfars 252.204-7003 control Of Government Personnel Work Product provision dfars 252.204-7004, Alt A, system For Award Management Alternate A clause dfars 252.204-7015 notice Of Authorized Disclosure Of Information For Litigation Support clause dfars 252.211-7003 item Unique Identification And Valuation clause dfars 252.223-7008 prohibition Of Hexavalent Chromium clause dfars 252.225-7001 buy American And Balance Of Payments Program clause dfars 252.225-7002 qualifying Country Sources As Subcontractors clause dfars 252.225-7048 export-controlled Items clause dfars 252.232-7003 electronic Submission Of Payment Requests clause dfars 252.232-7006 wide Area Workflow Payment Instructions clause dfars 252.232-7010 levies On Contract Payments clause dfars 252.225-7012 preference For Certain Domestic Commodities clause dfars 252.243-7001 pricing Of Contract Modifications clause dfars 252.244-7000 subcontracts For Commercial Items clause affars 5352.201-9101 ombudsman (fill-in Text) ombudsman: Afrl/pk Director alternate Ombudsman: Afrl/pk Deputy Director 1864 Fourth St wright-patterson Afb Oh 45433-7130 937-904-9700 afrl.pk.workflow@us.af.mil dpas Applicability: this Requirement Is Not Applicable To The Defense Priorities And Allocations System (dpas). solicitation Closing Information: quotes Are Due By: 3 January 2025 @ 4:00 Pm Est. quotes Must Be Received By The Closing Date Stated Above. Submit Quotes By Email. point Of Contact: the Point Of Contact For This Acquisition For Any Questions And For Submission Of Quotes Is: name: Mr. Jason B. Sav title: Contract Specialist email: Jason.sav@us.af.mil

Details: Description Request For Quotation Rfq-dhsudncr-24-005 General Repairs And Maintenance Services Of 3-unit Toyota Innova And 1-unit Toyota Hilux For The Fiscal Year 2025 Pursuant To Section 53.9 (small Value Procurement) Of The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184, The Department Of Human Settlements And Urban Development – National Capital Region (dhsud – Ncr) Would Like To Invite Your Company To Submit Quote Or Proposal For The Procurement Of General Repairs And Maintenance Services Of 3-unit Toyota Innova And 1-unit Toyota Hilux For The Fiscal Year 2025 The Approved Budget For The Contract (abc) Is One Hundred Seventy Thousand Pesos (p170,000.00), Inclusive Of All Existing And Appropriate Government Taxes And Charges. The Technical Specifications For The Said Procurement Items Are As Follows: Item No. Item Description Quantity 1 See Attached Terms Of Reference On Pg 3-5 4 Terms And Conditions: 1. Interested Bidders Must Submit An E-copy Of The Documentary Requirements Listed Below Along With The Proposal/quotation; 2. Price Quotation/s, To Be Denominated In Philippine Peso Shall Include All Taxes, Duties And/or Levies Payable; 3. The Item/s Shall Be Delivered According To The Requirements Specified In The Technical Specifications; 4. In Case Two Or More Bidders Are Determined To Have Submitted The Lowest Calculated And Responsive Bid, The Department Shall Adopt And Employ “draw Lots” As The Tie-breaking Method To Finally Determine The Single Winning Provider In Accordance With Gppb Circular 06-2005. 5. Quotations Exceeding The Approved Budget For The Contract Shall Be Rejected; 6. Award Of Contract Shall Be Made To The Lowest Quotation (for Goods And Infrastructure) Or, The Highest- Rated Offer (for Consulting Services) Which Complies With The Minimum Technical Specifications And Other Terms And Conditions Stated Herein. 7. Any Interlineations, Erasures, Or Overwriting Shall Be Valid Only If They Are Signed Or Initialed By You Or Any Of Your Duly Authorized Representative/s. 8. The Department Shall Have The Right To Inspect The Item/s To Check Its Conformity With The Required Minimum Technical Specifications; 9. Payment Shall Be Made Upon Completion Of Services And Upon Submission Of The Supporting Documents For Processing Of Payment (e.g., Delivery Receipt, Sales Invoice, Billing Statement, Warranty Certificate If Applicable, And Other Documents As May Be Required In The Technical Specifications); Please Note That The Corresponding Bank Transfer Fee, If Any, Shall Be Chargeable To The Account Of The Supplier, Contractor, Or Consultant. 10. Issuance Of Official Receipts (or) Or Sales Invoice (si) In The Name Of The Department Of Human Settlements And Urban Development – Ncr (dhsud - Ncr) Is Mandatory. The Supplier Shall Bear The Cost Of Mailing The Ors Or Sis. The Supplier Shall Be Responsible For Bearing Any Bank Charges And/or Service Charges That May Be Incurred By The Department In Case Of Payment Requests Via Check Deposit; Supporting Documents: 1. Philgeps Registration Number / Certificate Of Philgeps Membership; 2. Mayor’s Permit/business Permit; (note: In Case The Permit Has Recently Expired, Please Submit The Old Permit And Attach The Official Receipt For The Renewal Application Thereof.) 3. Bir 2303 Certificate Of Registration. 4. Tax Clearance 5. Signed Omnibus Sworn Statement (oss) Note: Notarized Omnibus Sworn Statement (oss) Shall Be Submitted By The Lcrb Or Scrb Prior To The Processing Of Payment. If The Authorized Representative Listed On The Reply Slip Is Not The Same Person Who Executed The Omnibus Sworn Statement (oss) Kindly Attach A Copy Of The Notarized Special Power Of Attorney (spa) Together With The Valid Government-issued Identification Card Of Both Signatories. Supporting Documents To Be Attached In The Notarized Oss (as May Be Applicable): For Sole Proprietorships – Dti Business Name Registration; For Partnerships Or Corporations - A Notarized Special Power Of Attorney, Or A Notarized Secretary’s Certificate, Whichever Is Applicable 6. Latest Income/business Tax Return Instructions: 1. Accomplish This Rfq Correctly And Accurately. 2. Do Not Alter The Contents Of This Form In Any Way. 3. Technical Specifications Are Mandatory. Failure To Comply With Any Of The Mandatory Requirements Will Disqualify Your Quotation. 4. Failure To Follow These Instructions Will Disqualify Your Entire Quotation. Your Quotation Or Bid Proposal Must Be Submitted Together With The Attached Reply Slip And Documentary Requirements Listed On Page 2 Of This Rfq, On Or Before 10:00h 09 January 2025 Either Through Personal Delivery To Administrative And Finance Division – Procurement Unit Located At The 5th Floor, Dhsud Building, Kalayaan Avenue Corner Mayaman Street, Diliman, Quezon City Or Via Email Address Jay.cariaga@dhsud.gov.ph The Dhsud - Ncr Bids And Awards Committee (bac) Will Recommend The Award Of The Contract To The Dhsud - Ncr Head Of The Procuring Entity (hope) Of A Bidder With The Single/lowest Calculated Responsive Bid (scrb/lcrb) Pursuant To Section 37.1.1 Of The 2016 Revised Irr Of Ra 9184. The Dhsud - Ncr Reserves The Right To Reject Any And All Quotations/bids, To Annul The Procurement Process, Declare A Failure Of Bidding, To Reject All Quotations/bids At Any Time Prior To Contract Award, Or Not To Award The Contract, Without Thereby Incurring Any Liability To The Affected Bidder/s, And To Accept Only The Offer That Is Most Advantageous To The Government Pursuant To Sec. 41 Of The 2016 Revised Irr Of Ra 9184. For More Details, Please Email Us Or Contact Mr. Jay Michael R. Cariaga At Viber Number +639929369300. (original Signed) Maria Remelyn Sanchez Officer-in-charge, Administrative And Finance Division Terms Of Reference General Repairs And Maintenance Services Of 3-unit Toyota Innova And 1-unit Toyota Hilux For The Fiscal Year 2025 1. Background The Department Of Human Settlements And Urban Development – National Capital Region Act As The Primary National Government Entity Responsible For The Management Of Housing, Human Settlement And Urban Development Within The National Capital Region. In Order To Effectively Carry Out The Mandated Functions, Operational And Administrative Requirements Of Dhsud-ncr, The Use And Availability Of Official Dhsud-ncr Motor Vehicles Is Essential. As Such, To Ensure Accountable And Judicious Use, Proper Upkeep, Maintenance, And Timely Repair Of Said Vehicles, The Dhsud-ncr Intends To Engage A Service Provider For The Provision Of General Repair And Maintenance Services, Including The Supply And Installation Of Spare Parts, For The Dhsud-ncr Motor Vehicles. 2. Approved Budget For The Contract (abc) The Approved Budget For The Contract (abc) Is One Hundred Seventy Thousand Pesos Only (p170,000.00), Inclusive Of All Existing And Appropriate Government Taxes And Charges. Works Due To Unforeseen Damage And Defective Parts Shall Not Form Part Of The Abc. Costs For Labor, Parts And Materials Included Therein Shall Require A Separate Sales/service Invoice, Billing Statement Or Statement Of Account To Facilitate Payment To The Service Provider. 3. Scope Of Services Provide Job Estimate/checklist Report Prior To Commencement Of The Preventive Maintenance Service (pms) Or Repair Works Subject To The Approval Of An Authorized Representative Of Dhsud-ncr Through Its General Services Unit, Administrative And Finance Division. Perform The Necessary But Not Limited To The Following Services Prescribed Below: • Replace Strainer Fuel • Replace Fuel Filter • Replace Drain Plug Washer • Lubricate All Door Hinges And Windows • Top-up All Fluids • Replace Gasket Drain • Provide Gas Injector Cleaner • Provide Fuel Drier • Provide Oil Conditioner • Provide Nitrogen Tire Pressure • Replace Serpentine Belt • Replace/maintain Levels Of Other Oils And Filters As Needed • Check Engine System • Check Transmission System • Check Battery Condition And Replacement • Check All Components Of Brake System • Check All Tire Condition (including Spare Tire) And Replacement • Provide Vulcanization Service • Check All Components Of Suspension System • Adjust/replace/provide Parts And Components As Needed • Provide Necessary Tools And Materials To Complete The Works • Provide Other Vehicle Repair And Maintenance Service Vehicle Plate Number Toyota Innova 2.5 E Dsl 2013 Mt Sky 693 Toyota Innova 2.5 J Dsl 2013 Mt Skr 833 Toyota Innova 2.5 E Dsl 2005 Mt Shl 868 Toyota Hilux Snd9008/ln366a 4. Responsibilities Of The Service Provider (sp) • The Sp Must Have Service Centers Located Within 5.5km-radius From The Dhsud Building In Quezon City. • At Least One (1) Service Adviser Or One (1) Sales Adviser Must Be Available As The Need Arises To Attend To The Concerns Of Dhsud-ncr. • Availability Of The Service Centers From 8:00 Am To 5:00 Pm Daily. • Necessary Spare Parts, Materials, Tools, Manpower And Equipment To Carry Out The Necessary Pms Works. • Safekeeping Of Dhsud-ncr Motor Vehicles During Pms At The Service Center. • Maintain Strict Control Of All Accountable Documents. This Includes Logs And Registers Required By Dhsud-ncr. These Documents Will Be Made Available To Dhsud-ncr Upon Request. Each Vehicle Should Have A File And History Records. • The Sp Shall Supply And Install Genuine Service Parts And Materials Conforming To The Standards For The Specific Motor Vehicle And Always Ensure Availability Of Said Items. • The Sp Shall Only Use Fully Synthetic Engine Oil Or Recommended Standard Engine Oil As Prescribed By The Manufacturer. • The Sp Shall Return All The Waste Materials Being Removed/replaced From Dhsud-ncr Motor Vehicles. • The Sp Shall Ensure The Recommended Level Of All Fluids And Lubricants Replenishment Fluids / Lubricants To Include; Engine Oils, Transmission, Brake And Hydraulic Fluids, Gear Lubricants, And Coolants That Meet The Standards Set Forth By The Authorized Dealer For The Motor Vehicle. • Original Equipment Manufacturer (“oem”), Commercially Purchased Or Built Parts May Be Used If The Parts Match Or Exceed That Of Its Equivalent Genuine Spare Parts After Receiving Approval From An Authorized Representative Dhsud-ncr Through Its General Services Unit. • Provide Service Billing/billing Statement/statement Of Account Indicating Guaranty/warranty Cover And Official Receipt For Every Pms Accomplished By The Sp (inclusive Of Government Taxes). • In Case Of Services Not Covered By This Section, Separate Sales/service Invoice, Billing Statement And/or Statement Of Account And Official Receipt Shall Be Issued By The Sp. • Provide Recommendation And Post-inspection Report After Pms And Repair Done By The Sp In Preparation For The Next Schedule. 5. Responsibilities Of Department Of Human Settlements And Urban Development – Ncr (dhsud – Ncr) • The Amount Billed Shall Be Paid Within 15 Days To 30 Days From The Receipt Of The Statement Of Account Subject To Submission Of Required Supporting Documents. • Bir Form 2307 Pertaining To Taxes Withheld Shall Be Issued For Each Payment Made. • Mode Of Payment Shall Be Auto Debit Arrangement, If Available.

Details: Description Republic Of The Philippines Department Of Public Works And Highways Regional Office Ii Dalan Na Pavvurulun, Rgc, Carig Sur, Tuguegarao City, Cagayan Invitation To Bid For 24b00145 : Department Of Health - Fy 2024 Health Facilities Enhancement Program (hfep): Rural Health Units (rural Health Unit) - Completion/ Equipping Of Super Health Centers - Santa Teresita Super Health Center 1. The Dpwh Regional Office Ii, Through The Ra 11975 (gaa Fy 2024) Intends To Apply The Sum Of ₱5,970,000.00 Being The Approved Budget For The Contract (abc) To Payments Under The Contract 24b00145: Department Of Health - Fy 2024 Health Facilities Enhancement Program (hfep): Rural Health Units (rural Health Unit) - Completion/ Equipping Of Super Health Centers - Santa Teresita Super Health Center. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Dpwh Regional Office Ii Through Its Bids And Awards Committee Now Invites Bids For The Hereunder Works: Name Of Contract : Department Of Health - Fy 2024 Health Facilities Enhancement Program (hfep): Rural Health Units (rural Health Unit) - Completion/ Equipping Of Super Health Centers - Santa Teresita Super Health Center Contract Id No. : 24b00145 Location : Santa Teresita, Cagayan Brief Project Description : Completion/ Equipping Of Super Health Centers: Installation Of Leaded Materials At X-ray Room, Installation Of Additional 5 Sets Of Air-conditioning Unit, Installation Of Emergency Shower & Eyewash, Construction Of Built-in Cabinets (laboratory), Construction Of Sharps And Needles, Installation Of Roll-up Door At Main Entrance Door, Construction Of Ambulance Bay And Patient Waiting Area, Pavement Of Walkway, Installation Of Electrical Works And Installation Of Stainless Steel Tubular At Ambulance Bay And Patient Waiting Area, Construction Of Powerhouse, Installation Of Roll-up Doors At Powerhouse, Installation Of Generator Set And Stainless Steel Water Tank Scope Of Works : Other General Requirements • Permits And Clearances • Project Billboard / Signboard • Occupational Safety And Health Program • Mobilization / Demobilization Earthworks • Removal Of Structures And Obstruction • Structure Excavation (common Soil) • Embankment (from Structure Excavation) • Gravel Fill Plain And Reinforced Concrete Works • Structural Concrete, 3000 Psi, Class A, 28 Days • Reinforcing Steel (deformed) Grade (40 & 60) • Formworks And Falseworks Finishing And Other Civil Works • Soil Poisoning • Catch Basin • Sewer Line Works • Sanitary/plumbing Fixtures • Cold Water Lines • Ceiling • Wall • Carpentry And Joinery • Finishing Hardware • Steel Doors And Frames • Roll-up Door (steel) • Waterproofing, Liquid • (glazed, Unglazed) Tiles • Cement (floor, Broom, Plaster) Finish • Non -slip Finish • Painting Works, (masonry/ Concrete, Steel) • Metal Deck Panel • Chb Non-load Bearing (including Reinforcing Steel) (150mm) • Louver Block • Metal Structure Accessories, (steel Plates) • Structural Steel (tubular Stainless Steel "ss304") Electrical Works • Conduits, Boxes & Fittings (conduit Works/conduit Rough-in) • Wires And Wiring Devices • Panelboard With Main & Branch Breakers • Generator Single Or Three Phase Stand-by • Solar Panel With Inverter, Battery And Other Devices • Lighting Fixtures • Reinforced Concrete Pedestal / Pole Mechanical Works • Ventilating System • Water Tank, Stainless Approved Budget For The Contract (abc) : ₱5,970,000.00 Contract Duration : 85 Calendar Days Inclusive Of 6 Unworkable/rainy Days, 18 Sundays And Holidays 2. The Major Category Of Work For The Project Is Bicwoplc - Buildings: Construction-without Piles-low Rise-concrete Frame(1 To 5 Storey ). 3. Prospective Bidders Should Be Registered With And Classified By The Philippine Contractors Accreditation Board (pcab) With Pcab License Size Range Of At Least Small B For Buildings. Contractors/applicants Who Wish To Participate In This Bidding Are Encouraged To Enroll In The Dpwh Civil Works Application (cwa) At The Dpwh Procurement Service (prs), 5th Floor, Dpwh Bldg., Bonifacio Drive, Port Area, Manila, While Those Already Enrolled Shall Keep Their Records Current And Updated. The Contractor’s Eligibility To Bid On The Project Will Be Determined Using The Dpwh Contractor Profile Eligibility Process (cpep) And Subject To Further Post-qualification. Information On Registration Can Be Obtained From The Prs During Working Weekdays From 7:00 Am To 4:00 Pm Or At The Dpwh Website Www.dpwh.gov.ph. 4. Pursuant To Gppb Resolution No. 15- 2021 Dated October 14, 2021, Prospective Bidders Shall Submit In Their First Envelope The Updated Philgeps Certificate Of Platinum Registration And Membership In Accordance With Sections 23.3, 24.4.3 And 54 Of Republic Act 9184 (ra9184), All Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Supporting The Veracity, Authenticity And Validity Of The Certificate Shall Remain Current And Updated, And That Failure By The Prospective Bidder To Update Its Philgeps Certificate Of Platinum Registration And Membership With The Current And Updated Class “a” Eligibility Documents Covered By Section 8.5.2 Of The 2016 Revised Irr Of Ra 9184 Shall Result In The Automatic Suspension Of The Validity Of Its Certificate Of Platinum Registration And Membership Until Such Time That All Of The Expired Class “a” Eligibility Documents Has Been Updated. 5. Bidders Are Required To Update Their Existing Philgeps Registration (platinum) In The Dpwh Civil Works Registry Prior To The Scheduled Receipt And Opening Of Bids. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The "“government Procurement Reform Act”. The Contract Shall Be Awarded To The Lowest Calculated Responsive Bidder (lcrb) Who Was Determined As Such During Post-qualification. 7. Interested Bidders May Obtain Further Information From The Dpwh Regional Office Ii And Inspect The Bidding Documents At Procurement Staff, 4th Floor, Dpwh Regional Office No. Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan During Weekdays From 8:00 A.m. To 5:00 P.m.. 8. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 12, 2024 - January 08, 2025, From The Address Given Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Ten Thousand Pesos Only (₱10,000.00). Pursuant To Section 17. 5 Of The 2016 Revised Irr Of Ra 9184, Bidding Documents Fee May Be Refunded In Accordance With The Aforementioned Guidelines Based On The Grounds Provided For Under Section 41 Of Ra 9184 And Its Irr. 9. The Bidding Documents May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), And The Website Of The Procuring Entity, Provided That Bidders Shall Pay The Applicable Fee For The Bidding Documents Not Later Than The Submission Of Their Bids. 10. The Dpwh Regional Office Ii Will Hold A Pre-bid Conference On December 19, 2024, 10:00 Am At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan, And/or Through Webcasting Via Youtube Channel (dpwh Regional Office Ii Procurement Livestream) Which Shall Be Open To Prospective Bidders. Prospective Bidders Are Encouraged To Send Their Technical Personnel To Attend The Pre-bid Conference. 11. Bid Submission May Be Done Manually Or Electronically. However, Bidders Should Only Select One Mode Of Submission, Either Manual Or Electronic. Similar To Manual Submission, The Guidelines For The Preparation And Submission Of An Electronic Bid Are Contained In The Bds Clause 17. 12. Bids Must Be Duly Received By The Bac Secretariat For Manual Submission At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan Or At Electronicbids_r2@dpwh.gov.ph For Electronic Submission And Receipt Of Bids On Or Before January 08, 2025 At 10:00 Am. Late Bids Shall Not Be Accepted. 13. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Bds Clause 15.1. 14. Bid Opening Shall Be On January 08, 2025, Immediately After The Deadline For The Submission Of Bid At The Procurement Conference Room, 4th Floor, Dpwh Regional Office Ii Extension Bldg. 2, Regional Government Center, Carig Sur, Tuguegarao City, Cagayan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 15. The Dpwh Regional Office Ii Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra 9184, Updated As Of July 19, 2024, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 16. You May Visit The Following Websites; For Downloading Bidding Documents: Dpwh Website: Www.dpwh.gov.ph Philgeps Website: Www.philgeps.gov.ph Livestreaming Website: Https://www.youtube.com/@dpwh.ro.2 For Online Bid Submission: Electronicbids_r2@dpwh.gov.ph 17. For Further Information, Please Refer To: Hilario Y. Casem Engineer Iv Head, Procurement Staff Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Contact No.: 0935-176-0624 Email Address: Casem.hilario@dpwh.gov.ph Bernard T. Calabazaron Chief, Qah Division Bac Chairperson Dpwh Regional Office Ii Carig Sur, Tuguegarao City, Cagayan Calabazaron.bernard@dpwh.gov.ph Date Of Posting: Dpwh And Philgeps Websites: December 12-18, 2024 Conspicuous Place (procurement Bulletin Board): December 12-18, 2024

Details: Description The Dr. Jose Fabella Memorial Hospital Hereby Invites Interested Suppliers To Submit Quotation For The Supply And Delivery Of: Particular Qty. Unit Cost Total Cost Cold Packs 5 Pcs ₱1,000.00 ₱5,000.00 • Reusable Cold Gel Pack • Durable Construction Resistant To Puncture • Standard Size Gel Pack 27cm X 16.5cm Parafin Wax Container 1 Set 20,000.00 20,000.00 • 6 Lb (4 Liter) Container With Oversized Tank Accommodates A Man Size 12 ½ Foot • Lightweight And Portable • Operating Temperature 125-134°f, 110 V • Kit Includes Container, Washable Terry Cloth And Mitt And • Bottie, 65 Hand/foot Plastic Liners And (6) 1lb Wax Blocks Portable Infrared Radiation Lamp 1 Pc 15,000.00 15,000.00 • Deep Focused Infrared Warmth With 150w • Adjustable Angle That Can Be Positioned Up To 40 Degrees Backward • Have An On And Off Switch At The Back Of Infrared Lamp • Has A Cord Storage Holder At The Back Of The Appliance • Cord Length: 180cm; Voltage: 220 Or 250v • Insulation: Class Ii (double Isolation) • Frequency: 50hz • Type Of Lamps: Par 38e, 150w + Prismatic Rings For More Focus • Dimension: 22cm H X 13cm W X 18.5cm D • A Box Dimension: 24cm H X 28.8cm W X 62.4cm D • Product Weight: 1 Kg; F-box Weight 1 Kg • F-box Dimension: 22.5cm H X 14cm W X 20.4cm D • A-box Weight: 6.4kg • Iec Certified: Complies To Iec 60335 Wall Standing Mirrors 1 Pc 4,500.00 4,500.00 • 34.4 Cm W X 1.6 Cm D X 154.4 Cm • Any Color • 28 Mm Thick, Polystyrene Plastic Frame With 3 Mm Thick, Normal Mirror And 3mm Thick Mdf Back Board Stretchable Resistance Band • Light (green): 600mm X 50mm X 0.35mm (5-10lbs) 1 Roll 5,000.00 5,000.00 • Medium (blue): 600mm X 50mm X 0.50mm (10-20lbs) 1 Roll 5,000.00 5,000.00 • Heavy (yellow): 600mm X 50mm X 0.70mm (20-30lbs) 1 Roll 7,000.00 7,000.00 • Extra Heavy: 600mm X 50mm X 1.10mm (40-48lbs) 1 Roll 9,000.00 9,000.00 Stretchable Resistance Tube • High Quality Latex Band Pre-formed Into A Loop • Material: Thermoplastic Elastomer • Resistance Tube Features A Double Layer Of Rubber At The Ends For Comfortable Grip • Resistance Tube Length: 140cm • Handle Width: 11cm Light 1 Pc 5,000.00 5,000.00 Medium 1 Pc 7,000.00 7,000.00 Heavy 1 Pc 9,000.00 9,000.00 Pulse Oximeter 1 Pc 3,000.00 3,000.00 • Monochrome Led Display • Measurement Accuracy: +2% Within The Range Of 70%-99% • Measurement Value <70% Accuracy • Charging Method: Usb Type C • Aa Battery • Power Consumption: Less Than 20mah • Usage: With Bottom, Automatic Testing • Automatic Shutdown: Finger Disengagement • Lightweight, Small, Easy To Use And Convenient To Carry Dumbells • Made Of Iron Material Covered With Neoprene • Hex Shaped Heads Design • Weights: 1 Lb 1 Pair 1,000.00 1,000.00 2 Lbs 1 Pair 1,300.00 1,300.00 3 Lbs 1 Pair 1,500.00 1,500.00 4 Lbs 1 Pair 1,700.00 1,700.00 5 Lbs 1 Pair 2,000.00 2,000.00 Ankle Weights • Made Of Oxford Cloth Materials Filled With Iron Sand • With 2 Velcro Straps On Both Sides With Heavy Duty Nylon And Adjustable Straps That Fits On The Ankle • Weights: 0.5kg 1 Pair 1,500.00 1,500.00 1 Kg 1 Pair 1,800.00 1,800.00 2 Kg 1 Pair 2,300.00 2,300.00 3kg 1 Pair 2,500.00 2,500.00 4kg 1 Pair 3,000.00 3,000.00 Inflatable Vestibular Ball 2 Pcs 5,000.00 10,000.00 • 75 Cm / 29.5-inch Size • Bearing Capacity Support Up To 330 Lbs • 3 Mm Thickened Abs Ball (anti-burst System) • Free Of Bpa And Heavy Metals • Assorted Color • With Foot Pump Included Inflatable Rubber Ball For Kids 2 Pcs 5,000.00 10,000.00 • Mini Inflatable Ball With Design For Kids • Small Flexible Enough To Grasp With One Hand Yet Big Enough To Hold With 2 Hands • Bouncy, Thick, Durable Pimpled Rubber • Nontoxic, Harmless Plastic • Diameter Approx.: 5–6-inch Diameter Wobble Board 1 Pc 6,000.00 6,000.00 • Made Of Molded Plastic With A Specially Designed Tactile Surface On The Top And Anti-skid Surface On The Bottom • 40cm L X 10cm H • 20mm Palm Touch With Surface Non-slip Sandpaper Handle Design Both Sides For Easy Gripping • With Curve Button Support In 360 Degrees Direction • Weight Limit For Each Board Is 300 Lbs. Yoga Mat 2 Pcs 5,000.00 10,000.00 • Lightweight And Durable Yet Cushioned And Strong • Washable And Easy To Clean • Size: 68 In L X 24 In W Rubber Mat Flooring / Play Mat For Kids 5 Packs 10,000.00 50,000.00 • Puzzle Interlocking • Made From Soft And Durable High-quality Foam • Epe Non-toxic Material • Feature: Anti-slip, Shock Absorbing And Soft • Dimension: 60 Cm By 60cm • Bright With Different Color Puzzle Mats • Lightweight And Easy To Install And Detach • 4 Pieces Per Pack Kinesiology Tape 5 Pcs 4,000.00 20,000.00 • 2 Inches Width • Sweat Resistant And Water Resistant And Air Permeable Allowing It To Be Worn For Days • Can Be Stretch By 30-40% • Assorted Color • Materials: Cotton, Spandex, Acrylic • Pressure Sensitive Adhesive, Hypoallergenic Hole Peg Board 1 Set 3,000.00 3,000.00 • Stacking Peg Board Set Includes 100 Pegs Of 10 Different Colors And One Board • Natural Solid Rubber-wood, Non-toxic, Smooth Finish, Coated With Soft Child Safe Water-based Paints • Sizes: Chess Board 8.5 Cm X 8.5cm X 3.35 Cm • Peg Height: 2 Cm Hand Grip Exerciser 1 Pc 2,000.00 2,000.00 • Metal Exerciser With Soft Eva Grips • Grip Tension Rating Of 33 Lbs • Product Size: 3.5 In W X 5 In H X 1 In D Finger Strengthener Exerciser • Trumpet Format • Size: 3.5 In X 5 In X 1 In • Material: Abs Composite Material • Latex Free Trp Grip • Steel Spring Component Light 1 Pc 2,000.00 2,000.00 Medium 1 Pc 2,200.00 2,200.00 Bp Apparatus And Stethoscope 1 Pc 25,000.00 25,000.00 • Mercury-free Sphygmomanometer • Adjustable Height And Position • Pressure Range: 0-300 Mmhg • Calibrated • Wheel Stand, With 5 Casters • With Lockable And Static Feature • With Complete Accessories: Nylon Velcro Cuff With Different Sizes (33-47 Cm For Obese Adult, 25-35cm For Regular Adult, 18-26cm For Child, 12-19cm For Infant And 6-11cm For Newborn, Inflator Valve, Air Control Bulb • Basket (attached To The Stand) For The Accessories • At Least 1 Year Warranty On Service And Parts Bicycle Ergometer 1 Pc 47,000.00 47,000.00 • For Upper And Lower Extremities • Foldable Bike Ergo Exerciser Used In Arms And Legs • With Anti-slip Pedal And Non-slip Bike Foot And Adjustable Resistance Gauge • With Or Without Lcd • Materials Used: Abs Pp Steel • Size: 48.5 Cm X 36 Cm X 33 Cm • Maximum Load Capacity: 100 Kg Product Weight Approx.: 2.4 Kgs Total ₱300,300.00 Quotation Must Be Submitted To The Bac Secretariat Office, New Dr. Jose Fabella Memorial Hospital, Tayuman St., Manila On Or Before January 7, 2025. To Submit Together With Quotation The Following Documents: 1. Philgeps Registration Certificate 2. Mayors Permit 3. Omnibus Sworn Statement For Details, Please Contact The Bac Secretariat At Bacfabella@yahoo.com / Fabella.procurement @ Gmail.com (tel. No. 88 66 7960 - 74). The Djfmh Reserves The Right To Accept Or Reject Any Or All Quotation, To Waive Any Defects Found Therein And To Accept Such Quotations As May Be Consider Advantageous To The Government. The Djfmh-bac Assumes No Obligation To Compensate Or Indemnify The Bidders For Any Expenses Or Losses That Maybe Incurred In The Preparation Of Quotations Nor Does It Guarantee That An Award Will Be Made. Maria Lu D. Andal, Md Chair, Bids And Awards Committee For Infrastructure, Goods Non-medical, Consulting Services, Non-medical Equipment, Services

Details: Description Republic Of The Philippines Province Of Bohol Municipality Of Batuan Abstract Of Bid/bill Of Quantities ____________________________ ____________________________ ____________________________ Sealed Proposals,plainly Marked''proposals For Supplying To The Government''subject To The Terms And Conditions Set Forth Will Be Received On_______________ Of _________________ And Publicly Opened In The Presence Of The Members Of The Bids And Awards Committee Or Their Duly Authorized Representatives. Item Qty Unit Item Description Unit Cost Total Cost 1 Unit Professional Digital Console Microphone Mixer 20 Channels, 12 Stereo Microphone Inputs 4 Stereo Signal Audio Inputs, 2 Stereo Signal Outputs, 6 Sub/bus Out Signal, 1 Head Room Out, Digital Touch Screen Display For Easy Calibration, Individual Parametric Graphic Equalizers At 26 Equalizers, Hot Spot Operated At Google Play Remote Control/can Be Control On Any Android Gadgets, 5 Inch 7 Inch Touch Screen Display, All With Matrix Adjustmt Gate & Compressor Control, With Vocal Effects Processor, 3 Heavy Duty, Studio Master Digilive. 1 Unit Professional Digital Audio Processor Digital Speaker Management * Take Control Of Your Pa System With This State -of-the[1]art Loudspeaker Management System * Automatically Set Up Your Pa With Updated Wizard Functions *take Control Of The Drive Rack Pa2 With Your Favorite Mobile Device Or Laptop *enhanced Advanced Feedback Suppression And Autoeq Functions *includes Dbx's Legendary Compression *works With Android, Ios, Mac, And Windows Devices *built-in Crossover, Limiting, And Driver Alignment Delays 4 Units Professional Passive Sound Reinforced Speaker System, Dual 15 Inch With 4 Inch Compression Driver Unit, By Amp Design, 2500 Watts Each (rms), Plybeirge Box Enclosure, Long Thru Voice Quality At 110 Degrees Voice Caption Dipression, Heavy Duty Series 9 Units Professional Sound Reinforced Self Powered (powered) Speaker System With Compression Driver Unit, 12 Inch Speaker Driver With Compression Driver Unit, 500-800 Watts (rms) Self- Powered, Digital Back Control Display, With Tone Control And Gain Control 4 Units Professional Sound Reinforced Sublow Passive Speaker, Customed Made Speaker Enclosure At Textured Finished, W-box Jbl Design Customed With Unit Of 1,600w Rms- Original P. Audio 18 Inch Speaker Inclusion Heavy Duty, All Weather Passive 2 Units Professional Stereo Power Amplifier For Sublow Speaker Use, Toroidal Power Supply At 2000-4000 Watts (rms) Per Channelx 2, Powerful Power Transitor Type, Heavy Duty 2 Units Professional Stereo Power Amplifier For Mid Low- Mid Hi-use, Toroidal Power Supply At 1800-3000 Watts (rms) Per Channelx2, Powerful Power Transitor Type, Heavy Duty, 1 Unit Professional Professional Stereo Power Amplifier For Hi Mid Hi-use, Toroidal Power Supply At 800-2000 Watts (rms) Per Channelx 2, Powerful Power Transitor Type, Heavy Duty 1 Set Professional Wireless, Handheld Microphone System, 2 Handheld Mic In One Set At Uhf Frequency Battery Operated, Plus Ufh Main Receiver In One Set Ufh Frequency, 220v, 100 Meters Caption, 1 Unit Professional Automatic Voltage Regulator, With Time Delay, Servo Motor Type, With Volt Meter And Amphe- Re Meter, Dual Toroidal Power Supply, Prevents Fluctuation Of Electricity From Low Voltage To Hi Voltage To Electrical Normalization, 20,000 Watts-(20kva) Heavy Duty 1 Lot Hardware, Bolt, Screws, And Other Electrical Ancilaries For Electronic And Electrical Connectivity That Includes Bracketing For The Bleacher Speaker System, Its Safety Cabling And Audio And Electrical Terminal 1 Set Professional Snake Box Customized From Operator S Booth To Signal To User 16 I 4 Returns 4 Rolls Professional Stereo Signal Cable, 99.99 Percent Copper Pure, 400 Ohms, Copper Pure, Heavy Duty, 4 Rolls Professional 16-2 Cable Enclosure In One Insulation With Ground, Royal Cord 16-2, 99.99 Percent Copper, Oxygen Free, Use As Speaker Cable/ Supply Cable: 40 Pairs Professional Xlr Male And Female Connectors, 1 Lot Professional Systems Installation Fee That Includes A) Bracketing B) Mounting Of Equipments C) Programming D) Calibration E) Termination F) Orientation To End User G) Orientation To Basic Maintenance Of The Said Supply Note: Along With This Package Is A Free 1 Set Of Stage Search/spotlight Red-green-blue-white Spot Colors 1 Set Supply And Professional Installation Of Led Wall With Protective Roll Up Covers, Its Framing Programming, Accessories And Electrical Supply Inclusions Per Set: 1 Set 60 Panels Of Led Wall At 50cmx50cm Per Set-- At P3.9 Projection Contrast Rate, Fine Quality, Ip66-67 All Weather Outdoor Led Wall Sytem, Water And Heat Proof, Programmable, Ultra High Definition, All Colors Available Real And Bright Image Projection, Can Form To Landscape Or Portrait Set Up Approximate Measurement When Assembled Per 40 Panels Of 50cm X 50cm= 8.65 Ft X 11.80 Ft 1 Unit- Led Wall Driver/ Controller, Heavy Duty 1 Unit: 30kva/30,000 Watts Automatic Voltage Regulator, Toroidal Power Supply With Voilt Meter And Ampere Meter Equipt With Time Delay And Servo Motor Type, Adopts Electricity Fluctuation Both Low And High Voltage, Heavy Duty 1set Metal Frame For Fixed Installation On The Stage 1 Set Protective Roll Ups, Stainless Steel Metal With Vertical Metal Support, Horizontal Roll Up Blades As Protective Cover, Heavy Duty, Customed Made 1 Unit Professional Computer Set With 24 Inch Computer Set Monitor, Computer Specs: *amd Ryzen 7 5700x 3.4ghz (4.6ghz Max Boost) Cpu Processor I 1tb Nvme Ssd Up To 30x Faster Than Traditional Hdd I 240mm Aio *nvidia Geforce Rtx 3060 12gb Gddr6 Graphics Card (brand May Vary) I 16gb Ddr4 Ram 3200 Gaming Memory With Heat Spreader I Windows 11 Home 64-bit *802.11 Ac I No Bloatware I Graphic Output Options Include 1x Display Port Guaranteed, Addiotional Ports May Vary I Usb Ports Including 2.0, 3.0, And 3.2 Gen 1 Ports I Hd Audio And Mic I Free Gaming Keyboard And Mouse *4 X Rgb Ring Fans For Maximum Air Flow, 11th Gen 1 Set Electrical Cables Its Safety Earth Groundings, Panels And Switches 1 Lot Professional Systems Installation That Includes Mounting Of Led Walls, Bracketing, Program Ming, Termination, Calibration And Orientation To End User 1 Unit Professional Stage And Entertainment Lighting And Effects Control With Bright Screen, Increased Processing Power, And Faster Graphics Engine, The Tiger Touch Ll Is The Most Specified Titan Console. * Represents The Perfect Combination Of Power And Portability * Small And Light Enough To Fly In Standard Hold Luggage *smpte Time Code Support And A Button Layout To Match The Entire Titan Range Quicksketch Labelling For Ultimate Personalization Powerfull Multi-user Networking With Any Titan Console Create Huge Effects In Seconds With Key Frame Shapes Feature-packed Cue Lists Supporting Macros, Tracking, Autoloads, Timecode And More Expand Dmx Channel Capacity With Titan Net Processors Synergy-ready. Add Any Ai Product To Unlock Seamless Video Integration 10 Unit Professional Beam 295 Moving Head Lights With Touring Hard Case Good For 2 Moving Heads Equivalent To 5 Touring Hard Case For 10 Units Of Beam 295 Features: 14r 295w Beam Moving Head Light Lamp: Roccer 14r 295w Channel Mode: 18 Dmx512 Channel Amazing Dot Matrix, Four Tact Switch, 180◦ Turning Show Color Wheel: 14colors + White, And Seven Colors Effect Gobowheel: 14 Gobos (8fixed Gobos + 5 Glasses Gobos + White) Effect Wheel: 6 Independent Prisms, 8 Prism/ T Prism/ 6+12 Prism/16 Prism/t Prism/8+16+24 Prism, Can Combine 17 Kinds Of Prism Effects 32 Units Professional Par Led Light Stage Color Changer Lights, Red Green Blue White Color Combination Heavy Duty 3 Watter Equals 162 Watts Over All At 54 Bulb Or 18 Bulbs At 9 Watts Per Bulb 2 Units Professional Crank Case Type Tripod Heavy Duty Lighting Stand Controls Up And Down Of Installed Lights, Easy Movable In Different Angles, Load Up To 70 Lkgs, Can Accommodate 8 Units Of Par Led Lights 2 Units Professional Power Smoke Machine System With 2 Liters Unscented Smoke Fluid Free Each Machine 1,500 Watts 4 Rolls Number 16 Pure Copper Power Dupex Cable, Heavy Duty, Philippine Standard Strand 5 Rolls Professional Dmx Cable, Signal Microphone Cable 100-400 Ohms Impedance, Heavy Duty, Pure Copper 99.99 Percent Coper, 2 Shielded Plus One Ground Wire In One Consolidated Cable, 4 Units Professional Dmx Lightings Signal Splitter, Heavy Duty At 8 Splits 1 Units Professional Automatic Voltage Regulator 30 Kva (30,000 Watts) With Ampere Meter And Volt Meter, Equip With Time Delay, Servo Motor Type, Toridal Power Supply, Dual Power Supply Winding At Pure Copper At Power Supply In One Cabinet, Enclose In One Stainless Steel Metal Cabinet, With Locking System And Caster Wheel For Mobility Protects All Lighting Equipments From Power Interruption That May Cause Power Fluctuation Form Low Voltage And Hi Voltage To Normalization Or Voltage Normalization 1 Lot Electronics Connector For All Electronic Connectivity 1 Lot Electrical Connectors, Panels, Outlets And Plugs 1 Lot Professional Systems Installation That Includes: A) Bracketing B) Mounting Of Equiptments C) Programming D) Calibration E) Termination F) Orientation To End User G) Orientation To Personnel To Operate On Basic Programming And Maintenance Of The Said Supply Total Total Bid/quotation Should Not To Exceed The Approved Abc Name Of Project: Purchase Of Supply Of Audio And Lighting Equipment With Systems Programming And Led Wall For Batuan Gymnasium Place Of Delivery:pob. Sur , Batuan, Bohol Time Of Delivery:__________________ Date Of Delivery:___________________ Bid Security Surety (5%) Cash Guarantee (2%) I Hereby Certify That The Above Articles Are Actually Carried In Stock By Me. The Terms And Conditions Specified Above Are Hereby. _______________________________ Name & Signature Of Bidder Eliseo B. Sumampong Bac Chairman

Details: Description Item No. Specification Statement Of Compliance “comply” Or “not Comply” 1 Supply, Delivery, Installation, Testing And Commissioning Of Supervisory Control And Data Acquisition (scada) System For Koronadal Public Market Water Supply System A. General 1. Scope A. The Scope Of Work Shall Be To Supply, Install, Test And Commission The Supervisory Control And Data Acquisition (scada) System For Koronadal Public Market. All The Required Parameters Shall Be Transmitted To City Of Koronadal Water District Main Office As The Central Command Center. B. The Scada System, In General, Performs The Following Tasks But Not Limited For Specified Parameters: I. Monitoring Functions Ii. Controlling Functions Iii. Graphical Displaying Functions Iv. Reporting Functions V. Alarming Functions Vi. Trending Functions Vii. Data Storage Viii. Other Related Functions That May Be Required By The Ckwd Not Stated Herein. 2. Conditions A. The System And Instruments Should Be Brand-new Specifically The Programmable Automation Controllers, Sensors, Variable Frequency Drives (vfd), Pumps, Motors, Electromagnetic Flowmeters, And Scada Software. B. The Supplier Shall Furnish All Labor, Materials, Tools, Equipment, Transport, Supplies And Other Services To Complete The Scada System And Shall Be Responsible For The Proper Installation Of The Supplied Equipment And Software. C. The Supplier Shall Install The Equipment And System Within One Hundred Twenty Days (120) Days After Signing Of Notice To Proceed (ntp). The 15-day Time Frame Shall Be Allotted In Order To Check The Proper Alignment Of The Pump/ Motor Assembly And Make Necessary Corrections Of Both Mechanical And Electrical Failures Found During Installation And Construction. The Supplier Shall Inform The Ckwd Measures And Proper Procedures On Its Operation To Guarantee A Smooth And Proper Function Of The Newly Installed Units And System. D. Field-testing Shall Be Made Once The Mounted Equipment Is Ready For Operation And When Both The Ckwd And Supplier Have Finished Their Scopes Of Work On The Installed Unit. During The Installation And Commissioning Of The Scada System, The Supplier Is Required To Assign A Technician Responsible For Overseeing The Commissioning Process. All Associated Costs, Including Transportation, Accommodation, Allowances, And Other Incidental Expenses, Shall Be Covered By The Supplier. E. The Supplier Shall Be Liable For Any Damages To Materials, Electro-mechanical Equipment’s Such As But Not Limited To Pumps And Motors, Variable Frequency Drive (vfd), Flowmeter, Level And Other Electro-mechanical Devices During Testing And Commissioning Of The Scada Project And Shall Be Required To Replace Immediately To Any Incur Defects Without Cost To Ckwd. All Incidental Expenses Including The Pulling Out And Transporting Of The Unit Shall Be Borne By The Supplier. F. In Accordance With The Electricity Safety Regulations, Supplier Is Strictly Prohibited From Connecting, Or Allowing To Remain Connected, Any Wiring Or Equipment In Unsafe Conditions To An Electrical Installation Or Power Supply. Additionally, To Control Hazardous Energy Sources, Standard Regulations Require That Machinery And Equipment Be Isolated From Their Energy Sources And Secured With A Lockout Or Tagout System Before Any Servicing Or Maintenance Is Performed. G. The Supplier Shall Provide A Comprehensive Warranty Covering All Parts And Labor For A Minimum Period Of One Year From The Date Of Delivery And Installation Of The Equipment And System. H. In Case Of Any Malfunction, Defect, Or Failure Of The Equipment And System During The Warranty Period, The Supplier Shall Offer Repair Services At No Additional Cost To The Buyer. I. The Supplier Must Respond To A Warranty Repair Request Within 24 Hours Of Notification By The Buyer. The Supplier Is Required To Complete The Repair Or Provide A Replacement Within A Maximum Lead Time Of 1 Week From The Time Of Notification. This Includes The Time For Diagnostics, Shipping Of Parts, And On-site Or Off-site Repair As Necessary. J. If The Repair Cannot Be Completed Within The 1-week Lead Time, The Supplier Must Provide A Temporary Replacement Of Equivalent Specifications At No Extra Cost To The Buyer, Until The Original Equipment Is Repaired And Returned To Full Working Condition. K. The Supplier Is Required To Maintain High Standards Of Housekeeping Throughout The Entire Project Duration. They Shall Be Fully Responsible For Managing And Securing Their Own Materials, Equipment, And Tools To Prevent Any Potential Accidents Or Safety Hazards In The Workplace. L. All Equipment/ Materials Must Be Brand New. 3. Location The Assembly Shall Be Installed At Koronadal Public Market, Purok Kaunlaran, Brgy. Zone I, City Of Koronadal. 4. List Of Major Components Item No. Item Quantity 4.a Programmable Logic Controller 1 4.b Human Machine Interface (hmi) 1 4.c Scada Software 1 4.d Workstation Pc 1 4.e Ethernet Switch 2 4.f Un-interruptible Power Supply 1 4.g Monitor 55" 1 4.h Wireless Antena (tx/rx) With Pole 2 4.i Variable Frequency Drive 2 4.j Pumps & Motors 2 4.k Water Level Monitoring Transmitter 4 4.l Electromagnetic Flowmeter 1 4.m Power Meter 1 4.n Fabricated Coated Panels W/ Complete Assembly 1 4.o Surge Protection Device 1 4.p Butterfly Valve With Actuators 2 4.q Pressure Transmitter 2 5. Major Components Specifications It Shall Meet The Following Operating Requirements: Description Specifications 5.a Programmable Logic Controller Digital Input 28 24 Vdc/vac Inputs, Up To 6 High Speed Counter Channels Relay Output 20 Relay Output Power Supply 24 Vdc Communication Embedded Usb Programming Port, Ethernet Port, Non-isolated Rs232/485 Serial Port Plug-in Ports 5 Plug-in Ports, Up To 4 Expansion Modules 5.b Human Machine Interface (hmi) Display 10.4 In. Display, Aluminum Panel With Resistive Touch Resolution 800x600 Or Higher Case Zinc-coated Skin Pass Steel Power Supply 24vdc (9 - 32vdc) Isolated Interface Ethernet: 2x Gigabit Ethernet (rj45), Usb: 2x Usb 3.0 (type-a / Host) Serial: 1x Rs232/422/485 (db9m) Isolated Operating Temperature 0° - 50°c Approvals Ce, Culus Listed, Ukca, Atex, Kc, Rcm 5.c Scada Software Scada Should Support Unlimited Displays, Unlimited Web Clients And Tags To Accommodate Future Integration With Our Pumping Stations. For Future Expansion, Scada System Shall Have Dual Monitor Capability To Provide Enhanced Visibility And Operational Efficiency. Data Logging To Odbc-compliant Database Such As Microsoft Sql Server Or Historian. 5.d Workstation Pc Cpu At Least 12th Gen Or Higher Intel Core I5 Storage (os) 256gb M.2 Gen 4 Nvme Ssd Storage (data) 2x1 Tb 7200 Rpm Hdd Or Higher Raid 0, 1, 5 Support Operating System Windows 10 Pro Or 11 Pro Memory 8gb Non-ecc Ddr5 Or Higher Display Output 2 X Displayport 1.4a Hbr2 Ports Ethernet Port Rj45 (1 Gbe) Ethernet Port Chassis/form Factor Tower 5.e Ethernet Switch Type Managed Switch Rj45 Ports Minimum 5x10/100baset Operating Temp -20 ~60 Deg. C Vlans Supported Secure Connectivity With Ssh And Https Supported 5.f Un-interruptible Power Supply Supplied Scada Product Must Have The Capacity/facility To Contain Battery-backed Memory For The Duration Of At Least One (1) Day Dedicated For The Plc's Programming And Configuration. System Must Be Able To Send Alerts For Power Outages. An Industrial Type Uninterruptible Power Supply (ups) Must Be Present For Plc Back-up For At Least Fifteen (15) Minutes. It Must Also Support Local And Remote Firmware Upgrade. 5.g Monitor Size: At Least 55" Mounting: Wall Mounted, Inclusive Of Installation 5.h Wireless Antenna (tx/rx) With Pole (communication Complete Set) Power Supply 24v, 0.3a Gigabit Poe Adapter Max. Power Consumption 7w Power Method Passive Poe Gain 23 Dbi Networking Interface (1) 10/100/1000 Ethernet Port Wind Survivability 200 Km/h Security Wpa2 Long-range Point-to-point (ptp) Link Mode 5.i Variable Frequency Drive Motor Power, Hp [kw] 1 Step Higher For 10hp Motor Ac Voltage Range 380v – 500v Voltage % Tolerance +10%, -15% Supply Number Of Phase 3 Phase Total Harmonic Current Distortion (thdi) 30 – 45% Prospective Short Circuit Current (kaic Rating) 65ka Nominal Current 52a Enclosure Rating Ip55 Local Control Panel W/mobile Phone Bluetooth Connectivity And Clear Display Vfd Features Motor Pre-heating Function Built-in Pid Control Built-in Safe Torque Off (sto) Function Full-text Diagnostic Display Dtc Control For Precise Torque Control And Enhance Energy Efficiency Removable Memory Unit For Faster Drive Replacement Digital Variable Frequency Drive That Is Scada Ready And Has Integrated Emc Filter. Complete Protection Against Over/under Voltage, Thermal Overcurrent, Lock Rotor, Ground Fault, Under Current, Definite Time Overcurrent. Digital Monitoring Of Voltage, Current, Frequency, Energy, Kw, And Fault History The Vfd Will Be Controlled Via Fieldbus. Status Updates, Diagnostic Faults, And Alarms Will Be Visible On Both The Hmi And Scada System. 5.j Pumps & Motors Number Of Pump And Motor 2 Units Pump Type Vertical In-line Maximum System Pressure 120 Psi Actual Calculated Flow 3.5 Liters Per Second Maximum Flow 5.0 Liters Per Second Mains Supply 230v Resulting Head Of Pump 35 Meters Head (maximum) 50 Meters Manifold Sizes (inlet And Outlet) 100 Mm Pump Parts In Contact With The Pump Liquid Made Of Stainless Steel Pump Bases And Heads Made Of Cast Iron; Other Vital Parts Are Made Of Stainless Steel Motor Rating 5 Hp, 230v, 3 Phase, 60 Hz 5.k Water Level Monitoring Transmitter Principle Radar Sensor Range Up To 8 Meters Output 4-20ma Beam Angle 8° Operating Voltage 12 - 35 V Dc Protection Rating Ip66 Or Higher Maintenance-free Operation Due To Non-contact 80 Ghz Radar Technology 5.l Electromagnetic Flowmeter Sensor Size Mm (in): 150 (6) Environment Protection Rating: Ip67/nema 6 Accuracy: ±0.2% Qmax (m3/hr): 700 Or Higher Qnominal (m3/hr): 600 Or Higher Qtransitional (m3/hr): 5 Qmin (m3/hr): 3.5 Or Lower Cable: 20 Meters (capable Upto 100m Or Higher) Flange Type Connection: Pn16 Lining Material: Elastomer Flange Material: Carbon Steel Housing Material: Carbon Steel Measurements: Direct/inverse Flow Transmitter Transmitter Mounting: Remote Power Supply: 85 To 265 V Ac Current Output: 4 To 20 Ma Security: Read-only Switch And Ultra-secure Service Password Digital Outputs: Three (3) Configurable Pulse/frequency And Alarm Outputs Fit-and-flow Data Storage Inside The Flow Meter Which Eliminates The Need To Match Sensor When Replace Self-calibrating Capabilities 5.m Power Meter Data Port Ethernet Interface Modbus Tcp Or Its Equivalent Supply Voltage 95-240v Ac; 110-340v Dc Digital Input 1 Or Higher Digital Output 1 Or Higher Degree Of Protection Ip65 Or Higher 5.n Fabricated Coated Panels W/ Complete Assembly Shall Provide Newly Fabricated Powder Coated Panels With A Complete Set Of Wiring Consumables For Network And Monitoring Of All Required Parameters. - Programmable Logic Controller - Human Machine Interface (hmi) - Io Modules - Circuit Breaker Protection - Power Meter - Surge Protection Device - Uninterruptible Power Supply - Exhaust Fan Shall Be Installed Inside The Control House And Shall Be Properly Ventilated 5.o Surge Protection Device Protection Performance Maximum Of 30 Microsecond Radius Of Protection 72 Meters Minimum 5.p Butterfly Valve With Actuators Size In (mm) 6” (150) Butterfly Valve Body Material Cast Iron Butterfly Disc Stainless Steel 304 Or 316 5.q Pressure Transmitter Measuring Range 0 To 16 Bar G (0 To 232 Psi G) Or 0 To 25 Bar G (0 To 363 Psi G) Current Output Signal 4-20 Ma Degree Of Protection Ip65 Or Higher 6. List Of Human Machine Interface (hmi) Alarms Item No. Alarm Descriptions 6.a Under Voltage 6.b Over Voltage 6.c Over Current 6.d Water Level Reservoir (cistern) Low Level 6.e Water Level Reservoir (cistern) High Level 6.f Water Level Right Building Low Level 6.g Water Level Right Building High Level 6.h Water Level Left Building Low Level 6.i Water Level Left Building High Level 6.j Discharge Line High Pressure 6.k Discharge Line Low Pressure 6.l Low/high Flowrate 6.m Submersible Motor Tripped 6.n Motor Control Panel High Temperature 6.o Motorized Valve (on/off Status) 6.p Vfd Alarms 7. System Architecture 8. Personnel Requirements The Contractor Shall Provide The Minimum Number Of Personnel For The Project, As Detailed In The Table Below. These Roles And Responsibilities Ensure Thorough Coverage Of All Project Aspects. Quantity Description 1 Project Engineer (pee) 2 Technical Engineers (electronics And Communications Engineer) 2 Technical Engineers (registered Electrical Engineer) To Ensure Qualified Personnel, All Professionals Must Have A Valid Unexpired Prc License. 9. Schedule Of Payment The Contract Duration Is One Hundred Twenty (120 Cd) Calendar Days Starting Upon Receipt Of Notice To Proceed. All Reports And Related Documents Must Be Submitted To The City Of Koronadal Water District Project Engineer And Should Be Officially Acknowledge Monthly. The Following Are The Schedule Of Payments: Payment Description Percentage Of Contract Price Remarks First Payment Upon Completion Of Item Orders 10% Must Submit Certification That All Components Are Ordered, Attached Proof Of Order From Suppliers Second Payment Upon Delivery Of All Items At Ckwd Facility 30% Must Compile And Submit All The Delivery Receipt Acknowledge By Ckwd Personnel Third Payment Upon Reaching 40% Of Project Accomplishment 30% Must Submit Certification That The Project Reached 40% Of Its Completion And Approved By The Ckwd Project Engineer Final Payment Upon Project Completion And Acceptance 30% With 5% Retention Upon Completion Total 100% B. Additional Requirements (compliance Upon Submission Of Bid) 1. Must Submit Original Catalog / Brochure For Vfd, Pump And Motor, Flowmeter, And Valve (please Specify Offered Product). 2. The Manufacturer Should Have Iso 9001:2015 Certificate Or Any Proof Of Renewal If Expired. 3. Minimum Manufacturer's Warranty Of One (1) Year. 4. Certification On Compliance To The Following: A. Reports: Indicate All The Fault Alarms From Vfd, Pressure, Flow, Level, And Other Protective Devices To Command Center. B. Trends And Data Logging: That Ckwd Will Provide The List Of Variables To Be Included In The Trend And Shall Be Logged Continuously In The Hard Drive For Historical Trending With Reference To The Monitoring Requirements. C. After Sales Service: After The Final Acceptance, The Contractor Shall Conduct A Monthly Site Visit Within The Warranty Period. The Contractor Shall Have 24/7 Availability Of Technical Engineers Within Mindanao Island. Must Submit Notarized Statement Of Undertaking Stipulating Availability Of Skilled Personnel Within Mindanao. D. Site Visit: The Bidder Shall Conduct A Site Visit/survey On Or Before The Pre-bid Conference Schedule To Ensure That They Know The Status/set Up Of The Project Site. Must Submit Certification Signed By Ckwd Project Engineer In-charge. E. Warranty: All Components Shall Be Guaranteed Against Defects In Workmanship And Materials For A Period Of One (1) Year From The Date Of Project Completion. Defective Components Or Parts Discovered Within The Warranty Period Shall Be Replaced Without Charge Or Additional Cost To Ckwd. 5. Bidders Qualifications: A. Must Submit Certification Or Any Document That The Bidder Has A Regional Presence Or A Regional Service/support Partner/center Within Mindanao. B. Bidder Must Be An Authorized Distributor From Manufacturer. Must Submit Certificate Of Distributorship. C. Bidder Must Have A Pcab License. D. Bidder Must Have An Experience Of Having Completed At Least Three (3) Contracts That Is Similar To The Contract To Be Bid. (indicate In The Form Of Statement Of All On-going Government & Private Contracts Including Contract Awarded But Not Yet Started.) E. Bidder Must Have Been In The Business For At Least Five (5) Years Of Providing Scada System Solution And Services In Government Or Private Sectors. Must Submit Dti Or Sec Registration. C. Additional Requirements (compliance Upon Delivery) 1. The Supplier’s Technical Representative Shall Be Present During Installation And Commissioning For Final Testing. 2. Must Submit Comprehensive Documentation, Including But Not Limited To Operation Manuals, Datasheets, And Manufacturers’ Certificates For All Electrical And Mechanical Components. 3. Trainings/transfer Of Technology: The Winning Bidder Shall Provide Inhouse Training On The Following Working Subject Matters: A. Plc And Scada Software Programming B. Installation C. Configuration D. Calibration E. Troubleshooting/operations And Maintenance All Associated Costs, Including Transportation, Accommodation, Allowances, And Other Incidental Expenses, Shall Be Covered By The Supplier.

Details: Notice Of Sources Sought The Purpose Of This Sources Sought Announcement Is For Market Research To Make Appropriate Acquisition Decisions And To Gain Knowledge Of Potential Qualified Service-disabled Veteran Owned Small Businesses (sdvosb), Veteran Owned Small Businesses (vosb), And Small Businesses Interested And Capable Of Providing The Services Requested, As Well As Any Large Businesses. The Results From This Source Sought Notice Will Be Used To Determine The Appropriate Set-aside. The Intended Contract Is A Firm-fixed Price Service Contract. The Department Of Veterans Affairs, Nco20 Is Looking For Vendor Sources For The Following Requirement: A Blanket Purchase Order (base + 4 Option Years) For Urinalysis Testing See Attachments For More Information: Attachment A: V20 Estimated Urinalysis Test List Volume Attachment B: V20 Participating Medical Centers And Pocs Attachment C: V20 Bpa Price List (must Be Filled Out) Required Information In Your Response To Sources Sought: In Order To Be Considered A Valid Source That Can Impact The Set-aside Determination Of A Possible Future Solicitation, Potential Contractors Shall Provide, At A Minimum, The Following Information To Peter.park2@va.gov By Below Response Deadline: 1) Company Name, Address, And Point Of Contact, Phone Number, E-mail Address, And Uei. Provide Any Existing Gsa/fss Contract Number This Requirement Can Be Fulfilled Under. 2) Please Identify Your Company S Size In Comparison To The Anticipated North American Industry Classification System (naics) Code 334516 Analytical Laboratory Instrument Manufacturing. To Be Considered A Small Business Your Company Must Have Less Than 1,000 Employees. This Notice Is To Determine The Marketplace For This Specific Requirement. Please Check One Of The Following: [ ] Yes [ ] No Service Disabled Veteran Owned Small Business (sdvosb) [ ] Yes [ ] No Veteran Owned Small Business (vosb) [ ] Yes [ ] No Small Business Manufacturers [ ] Yes [ ] No All Other Small Business (sb) [ ] Yes [ ] No Other Than Small Business 3) Any Service-disabled Veteran Owned Businesses Or Veteran Owned Businesses Who Respond To A Solicitation On This Project Must Provide A Sba Certification And Be Registered With U.s. Small Business Administration Veteran Small Business Certification (vetcert) Located At Https://veterans.certify.sba.gov/. 4) Only Authorized Service Representatives/providers Of The Manufacturer Will Be Considered. No Used, Refurbished, Remanufactured, Or Counterfeit Parts Will Be Allowed. Please Provide A Proof Of Authorized Service Provider Letter From Manufacturer. 5) Please Complete The Attached Price List (attachment C). This Is Not A Quote. 6) Capabilities Statement Addressing The Requirements In The Statement Of Work To Include: References For Similar Services Currently Being Provided Or Previously Provided At The Required Service Levels As Outlined In The Statement Of Work. The Government Is Not Obligated To Nor Will It Pay For Or Reimburse Any Costs Associated With Responding To This Sources Sought Notice. This Notice Shall Not Be Construed As A Commitment By The Government To Issue A Solicitation Or Ultimately Award A Contract, Nor Does It Restrict The Government To A Particular Acquisition Approach. The Government Will In No Way Be Bound To This Information If Any Solicitation Is Issued. Notice To Potential Offerors: All Offerors Who Provide Goods Or Services To The United States Federal Government Must Be Registered In The System Award Management (sam Located On The Web At Www.sam.gov). It Is Desirable That Any Offeror To Have Completed Their Business Online Representations And Certifications Application In The System For Award Management (sam). Service Address: Various Stations In Nco 20 See Attachment Point Of Contact: Peter Park Contracting Officer Peter.park2@va.gov Response Deadline: 12/20/2024 By 3:00pm Pacific Time Statement Of Work: Bpa For Visn 20 Cprr Urinalysis Testing Bpa Language The Government Will Award A Cprr Bpa To A Single Contractor For Urinalysis Testing. Contractor Agrees To The Following Terms Of The Bpa Exclusively With Visn 20 And Awarded In The Final Bpa. Under This Agreement, The Bpa Holder Shall Provide Cprr Urinalysis Testing For All Visn20 Medical Facilities. The Vha Facilities Within Visn20 Listed On This Bpa Are Authorized To Order Any Item Listed On The Price/cost Schedule At The Listed Price. No Items May Be Ordered Off This Bpa Unless They Are Listed On The Price/cost Schedule. Additional, Related Items May Be Added Without Further Competition To The Price/cost Schedule With The Award Of A Modification By The Administering Contracting Officer (co). The Administering Co Is The Only Vha Employee Authorized To Modify This Bpa. Obligation Of Funds This Bpa Does Not Obligate Any Funds. The Government Is Only Obligated To The Extent Of Authorized Task Orders Issued Under This Bpa. Period Of Agreement This Bpa Is Effective From The Date Of Award For A Period Of 5 Years. Option To Extend The Term Of The Bpa The Government May Extend The Term Of This Bpa For A Period Of Up To Six (6) Months, Exercisable In Increments Of Not Less Than One (1) Month. By Written Notice To The Contractor At Any Time Prior To The Expiration Of The Bpa, Provided That The Government Shall Give The Contractor A Preliminary Written Notice Of Its Intent To Extend At Least 30 Days Before The Bpa Expires. The Preliminary Notice Does Not Commit The Government To An Extension. Prices And Terms Visn20 Has Provided An Estimated Annual Volume By Test As Reflected In Attachment A. Pricing Is Based On The Average Annual Test Volume. The Government Estimates The Volumes As Listed In Attachment A But Does Not Guarantee Volumes As Listed; They Are Estimates Only And The Government Doesn T Guarantee That All Listed Stations Will Participate In The Bpa. The Government Estimates, But Does Not Guarantee, That Individual Bpa Orders Placed Against This Agreement May Reach $825,000.00/per Order. This Order Limit May Be Increased By Mutual Agreement Of The Parties As Necessary, In Whole Or Part. The Authorized Ceiling Limit Of The Agreement Is Set At $4,500,000.00 Over The Period Covered By The Agreement; This Ceiling Is Also Not A Guarantee. The Ceiling Limit May Also Be Raised In Association With Order Limit Increases Or Other Conditions Which, By Mutual Agreement Of The Parties, Maybe Considered Necessary. Authorization For Individual Task Orders Above The Stated Task Order And/or Ceiling Limits Must Be Coordinated Through The Contracting Officer Before Larger Valued Orders Can Be Issued And Prior To Commencement Of Work. All Unauthorized Work, Regardless Of Amount, Will Be Processed Through The Ratification Process. Price/cost Schedule Estimated Quantities And Pricing Per Facility Order Placement All Properly Warranted Cos Serving Visn20 Are Authorized To Place Orders Under This Bpa. Task Orders Will Be Placed Against This Bpa Using Outlook Email Messages, Electronic Data Interchange (edi), Fax Internet Portal, Paper Or Oral Communications. Delivery Order Oversight Each Ordering Location Will Designate A Contracting Officer's Representative (cor) Or Poc (if Dollar Amounts Warrant A Cor, And Subject To Co Approval), Who Will Be Responsible For Verifying Contract Compliance And Certify Invoices. Requirement Specifications / Statement Of Work Scope: The Contractor Shall Provide Automated Clinical Laboratory Urinalysis Testing For Urine Dipstick Chemistries, Urine Microscopic Analysis, And Body Fluid Analysis (as Applicable) To Produce Cost Per Reportable Results (cprr) For The Locations Listed Below. Installation And Operational Training Will Be Provided By The Vendor At The Government S Facility. Vendor Will Provide Field Service Support. Vendor Will Also Supply Government With Sufficient Supplies, Reagents, And Training To Execute The Urinalysis Analyzer In The Performance Of The Testing Listed For Each Site Based On Estimated Patient Results Per Month. Equipment Will Be Defined By The Facility. Participating Locations: Alaska Va Healthcare System: 1201 North Muldoon Road, Anchorage, Ak 99504 Boise Va Medical Center: 500 West Fort Street. Boise, Id 83702 Eugene Health Care Center: 3355 Chad Dr., Eugene, Or 97408 Va Portland Health Care System: 3710 Sw U.s. Veterans Hospital Road, Portland, Or 97239 Roseburg Va Health Care System: 913 Nw Garden Valley Blvd., Roseburg, Or 97471 Va Southern Oregon Rehabilitation Center: 8495 Crater Lake Hwy., White City, Or 97503 Va Puget Sound Health Care System - American Lake Division: 9600 Veterans Dr Southwest, Tacoma, Wa 98493 Va Puget Sound Health Care System: 1660 S. Columbian Way, Seattle, Wa 98108 Mann-grandstaff Va Medical Center: 4815 N. Assembly Street, Spokane, Wa 99205 Jonathan M. Wainwright Memorial Va Medical Center: 77 Wainwright Drive, Walla Walla, Wa 99362 Map And Locations For Medical Centers And Clinics Within The Visn 20 Northwest Network Can Be Found At The Following Link: Https://www.va.gov/directory/guide/region.asp?id=1020. General Requirements: Leased (cost Per Reportable Result) Equipment. All Related Consumables And Supplies. All Necessary Service To Keep Equipment In Manufacturer's Operating Conditions, Both Preventive Maintenance And Emergency Repairs. Training For Personnel Operating Equipment. Cost Per Reportable Result Cprr: Cost Per Patient Reportable Result (cprr): As Defined In The Federal Supply Schedule Fsc Group 66, Part Iii, Cost-per-test Clinical Laboratory Analyzers - Contractors Are Required To Provide A Price For A Reportable Patient Result. The Per Patient Reportable Result Price Shall Include Costs Covering: (1) 5-year Equipment Use, (2) All Reagents, Standards, Vendor Provided Quality Controls, Supplies, Consumable/disposable Items, Parts, Accessories, And Any Other Item Required For The Proper Operation Of The Contractor S Equipment And Necessary For The Generation Of A Patient Reportable Result. This Per Patient Reportable Result Price Shall Also Encompass All Costs Associated With Dilution; Repeat And Confirmatory Testing Required To Produce A Single Patient Reportable Result. It Shall Also Include The Material To Perform As Well As All Other Costs Associated With Quality Control, Calibration And Correlation Study Testing That Is Prescribed By The Clinical And Laboratory Standards Institute (clsi). (3) All Necessary Maintenance To Keep The Equipment In Good Operating Condition (this Element Includes Both Preventive Maintenance And Emergency Repairs) And (4) Training For Government Personnel. Contractors Shall Provide Delivery, Installation And Removal Of Equipment At No Additional Charge. Parameters: The Calculation For Price And Quantity Of Reagents In The Annual List Included In The Contract As Based On An Estimated Annual Number Of Reportable Results Provided By The Government. The Annual Quantities Of Supplies Shall Be Sufficient For Testing As Long As The Reportable Results Are Submitted In Compliance With The Following Parameters: Numbers Of Reportable Results Actually Performed By The Government Are Within Ten Percent Of The Annual Estimated Reportable Results As Indicated By The Annual Supply List. Use Of The Instrument(s) Are In Accordance With Instrument Usage Information Provided By Government (primary, Back-up Or Alternate). Test Volumes Are Determined By The Government. No More Than 10 Percent Repeats. Two Levels Of Quality Control To Be Run As Required By The Manufacturer Every Test Day. Calibrators For Periodic Calibration Checks And Demand To Validate Systems Following Major Repair Or Resolution Of Negative Quality Control Trends. Adjustments: The Government And Vendor Will Conduct Ongoing Reviews No Less Than Annually To Monitor Contract Performance Against Agreed Upon Efficiencies, Operational Assumptions, And Product Utilization (cppr Parameters). The Vendor Will Notify The Government When Such Reviews Indicate An Adjustment To The Quarterly Standing Order Shipments May Be Required. The Government Will Cooperate With The Vendor In The Conduct Of The Reviews. Vendor, Their Personnel, And Their Sub Vendors Shall Be Subject To The Federal Laws, Regulations, Standards, And Va Directives And Handbooks Regarding Information And Information System Security As Delineated In This Contract.839.201 Contract Clause For Information And Technology Security. Equipment: Vendor Will Provide Urinalysis Analyzer(s) For Lease To Meet Visn20 Facilities Usage Needs. Installation: The Vendor Shall Deliver And Install All Rented Or Purchased Equipment Under This Contract After An Order Is Placed. Equipment Shall Be Installed Within 30 Business Days After Receipt Of Order. Equipment Shall Not Be Considered Installed Until Va Employee Certifies That The Equipment Is Properly Functioning And Has The Necessary Supplies To Perform Its Required Function. The Vendor Shall Maintain A Record Of Installation To Include: Location, Model Number, Serial Number, And Date Of Installation. Removal: The Vendor Shall Un-install And Remove All Rented Equipment Under This Bpa From The Requesting Facility Upon Request. Equipment Shall Be Removed Within 30 Days Of Request. Equipment Shall Be Considered Removed Upon A Va Employee Certification That The Equipment And All Accessories Have Been Taken By An Employee Of The Vendor And There Is No Disruption And /or Damage To The Surrounding Area. The Vendor Shall Maintain A Record Of Removal To Include: Location, Model Number, Serial Number, And Date Of Removal. Equipment Requirements: Vendor Shall Provide Urinalysis Systems That Meet The Following Requirements: Instrument Shall Include Chemical Analysis Of Urine (to Include Bilirubin, Urobilinogen, Ph, Specific Gravity, Glucose, Protein, Blood, Nitrites, Ketones And Leukoesterase) Without Interference From Urines With Common Abnormal Colors (red, Orange, Etc.). Instrument Shall Also Identify Formed Elements Including But Not Limited To, Red Blood Cells, White Blood Cells, Epithelial Cells (differentiating Transitional, Renal, And Squamous) Crystals, Casts, Bacteria, And Yeast Without The Need To Consistently Verify With Manual Microscopy. There Must Be A Direct, Automated Specimen Pathway Between The Chemistry Urinalysis Specimen Sampling And Testing And The Microscopic Urinalysis Sampling And Testing. Equipment Shall Provide Accurate Test Assay Results For Sample Specimens Up To The Manufacturer's Defined Maximum Tests Per Hour Without Excessive Malfunctions, Breakdowns, Or Service Calls. Instrumentation Shall Have Auto Reflex Testing Capability For Specimens Which Require Sediment Analysis. System Shall Have A Minimum Throughput Of 60 Samples Per Hour On The Microscopic Side. The Instrument Shall Have Customer Defined Rule Criteria To Reduce The Number Of Manual Reviews And Off-line Testing Required By The Operator. The System Shall Have The Ability For Auto-validation, Should The Facility Choose To Auto Validate Results. Instrument Shall Auto-classify Formed Elements With Limited Review By The Operator. Microscopic Analysis Must Be Fully Quantitative. Microscopic Analysis Must Have The Ability For The Instrument To Identify Cellular Microscopic Components And Provide Reviewable Digital Images. Instrument Must Offer Limited To No Carryover From Sample To Sample To Reduce Interference. Instrument Must Have The Ability To Continuously Feed At Least 300 Chemistry Strips Without Operator Re-load. Time From Standby To Operation Processing Samples Is Less Than 3 Minutes. Time Required For Routine Maintenance Activities Shall Take Less Than 30 Minutes Daily And Less Than 30 Minutes Weekly/monthly. All Testing Shall Be Fda Approved, Including Body Fluids If Available. Current Waste Stream Analysis And Sds (safety Data Sheets) Shall Be Provided To All Locations. Editable Electronic Copy In Clsi (clinical And Laboratory Standards Institute) Format Of Operating Procedures Shall Be Furnished With Each Instrument Supplied To All Participating Facilities. Testing Shall Include Current Laboratory Assays, But The Va Reserves The Right To Add Additional Tests To Test Menu. Protocols In Place For Various Degrees Of Urine Turbidity. A Selection Of Instruments Will Be Available Based On Volume, Test Menu Needs And Throughput Requirements Of Each Individual Facility. Instrument Shall Allow Patient Sample To Be Used For Repeats Or Reruns On The Same Or Different Instrument. All Instruments Must Be New (non-refurbished) Equipment. Contractor Shall Provide All Upgrades To The Equipment Hardware And Operating System Software, At No Additional Cost To The Government. (note Current Va Security Regulations Require Windows Based Operating Systems Be Windows 10 Or Higher). Instruments That Have The Ability To Have Access To The Internet Must Follow Va It Security Policies. The Internet Access Must Be Verified And Adhered To Before And During All Internet Access. Contractor S Software Is Required To Be Compatible And Interface Immediately Upon Award With Governmental Systems Which Include Cprs, Vista, And Cerner. Contractor Must Provide Evidence With Their Solicitation Response That Their Software Is Already Accepted For Use By Vha It Systems. All Equipment Shall Come With Any Required Accessories To Perform Normal Duties, To Include But Not Limited To, Properly Programmed Printers And Monitors, And Ups. The Analyzers Will Be Va Laboratory Information System (lis) Interfaceable, And The Vendor Will Supply Lis Specifications And Assist With The Interface Connections. Operation Of Software Uses Minimal Computer Strokes To Move From Testing To Reagent To Data Analysis Or/and Other Screens. Size Of Instrumentation Shall Be No More Than 65 W X 21 D. If Stand Is Required, It Is Included In The Contract At No Additional Cost. Upgrades Shall Be Delivered And Installed Within 60 Days Of Issuance To The Commercial Market. An Operator's Manual Shall Be Furnished With Each Instrument Supplied To Va And Updates To Manual Shall Be Provided In A Timely Manner. Uptime Guarantee/ Performance Penalty: Vendor Agrees That All Equipment Provided Shall Be Operable And Available For Use No Less Than 98% Of Operational Time Per Month. Each Instrument At Site Shall Be Computed Separately. Operational Time Is 24 Hours Per Day 7 Days A Week. Downtime Is Defined As When The Vendor Is Not Able To Produce Clinically Acceptable Results On The System Monitor And Will Be Computed From The Time The Government Notified The Hotline During Normal Working Hours Until The Field Service Engineer Returns The Instrument To The Government And The Government Can Produce Acceptable Clinical Results. Scheduled Maintenance Is Excluded From Downtime. Method Validations: Once The Instrument Has Been Installed According To The Vendor Specifications At The Government Location The Vendor Will Supply A Technical Representative To Perform Method Validation Studies During All Equipment Installations At All Facilities. The Method Validations Will Be Completed To Include The Necessary Studies Required For Clinical Laboratory Information Act (clia), College Of American Pathologist (cap) And Department Of Veterans Affairs (va) Regulatory Agencies And Shall Include Precision, Linearity And Current System To New System Correlations As Well As Establishment Of Normal And Therapeutic Ranges. The Va Will Not Accept Equipment Until It Passes All Validation Testing. Validation Testing Will Be Conducted On The Facilities Primary And Secondary Testing Methods. The Va Will Provide All The Samples Necessary For The Validation Studies. Maintenance And Repairs: Vendor Shall Provide Preventative And Corrective Maintenance Per Manufacturer's Recommendation. This Shall Include Software Upgrades And Parts And Labor, To Maintain All Urinalysis Equipment And Accessories. At A Minimum, Preventative Maintenance Shall Be Twice Annually, Beginning Six (6) Months After Installation. Vendor Will Furnish All Transportation, Equipment, Tools And Labor To Accomplish The Required Maintenance. Emergency Repairs Shall Be Performed After Initial Telephone Notification That The Equipment Is Inoperative. The Field Service Representative Will Call To Schedule Onsite Service Within 2 Hours Of Notification From Technical Assistance Hotline If Necessary. The Vendor Shall Provide The Government With A Designated Point Of Contact And Telephone Number And Shall Make Arrangements To Enable His Maintenance Representative To Receive Such Notification. Telephone Service Support Shall Be Available 24 Hours/day,7days A Week. Onsite Field Service Support Shall Be Available Monday- Friday 8am- 4:30 Pm (local Time). Onsite Repairs Shall Be Initiated Within 24 Hours Of First Notification From Technical Hotline To Field Service Engineer. Efforts Shall Be Made By The Vendor To Minimize Disruption To Governments And Employees (i.e. Reschedule If Work Interferes With Normal Operation, Access Equipment When Convenient To The Needs Of The Va, Etc.) Vendor Shall Maintain Cleanliness Of Work Area And Minimize Dust And Contaminants To Areas Adjacent To The Job Site. Vendor Shall Furnish A Malfunction Incident Report To The Installation Upon Completion Of Repair Call Within 2 Business Days After The Completion Of Work. The Report Shall Include As A Minimum The Following: Date And Time Notified. Date And Time Of Arrival. Serial Number, Type And Model Number(s) Of Equipment. Time Spent For Repair. Description Of Malfunction And Repair. Proof Of Repair That Included Documentation Of A Sample Run Of Quality Control Verifying Acceptable Performance. Each Instrument Provided By The Vendor Shall Maintain An Uptime Of 98% In Each Month Of The Term Of The Agreement. During The Term Of The Contract, Should The Repair Record Of Any Individual Piece Of Laboratory Equipment Reflect A Downtime Of 5% Or Greater Of The Normal Working Days In One Calendar Month, It Is The Responsibility Of The Vendor To Immediately Replace The Broken Laboratory Equipment With New Equipment At No Additional Cost To The Government. The Responsibility For Maintaining The Equipment Furnished In Operating Condition In Accordance To Manufacturer's Instruction, Shall Solely Be The Responsibility Of The Vendor. The Contractor Shall Not Leave A Service Call Open Pending Verification That Repairs Are Completed By The Contractor's Maintenance Personnel. For Each Instrument Provided, The Vendor Shall Treat Each Notification For An Emergency/repair Service Call Form The Government As A Separate And New Service Call. The Following Are Guaranteed Throughout The Life Of This Contract: Priority Scheduling Of Requests For Service. Unlimited Emergency Service. No Charges For Labor, Travel Or Any Other Related Expenses. Unlimited Parts. No Charge For Replacement Parts Which Become Marginal Or Defective Due To Normal Use During Agreement Period. Factory Authorized Product Updates And Modifications. Installed At No Additional Charge For Improved Product Performance And Reliability. Factory Trained And Authorized Service Engineers. Continual Upgrading And Certification Of Engineers In Latest Instrument Technology. Training: With The Exception Of Specific Training Requirements Stated Herein, Which Shall Have Precedence; Vendor Shall Provide "operator" Training In Accordance With The Terms, Conditions, And Provisions Of The Vendor's Existing Federal Supply Service Contract. Listed Below Are The Training Requirements: The Vendor Shall Provide, At No Cost To The Government, On-site Training And Key Operator Training For At Least 2 Operators Per Instrument Per Site. Provide Initial In-depth Training For Two Key Operators At The Facility And For Each Individual Instrument Provided. Provide Annual Training For One Va Equipment Operator, Per Each Instrument, For The Participating Medical Center. Provide On-site Vendor Operator Training For All Personnel Who Will Run Instrument With Training Provided For All Applicable Shifts. The Vendor Shall Have An On-going Training Program For Employees By The Technical Service Representatives On Any New Products Or Updates On The Product Lines. All Materials For Training Will Be Provided At No Additional Cost To The Government. The Vendor Will Provide Competency Assessment Protocols For Use At Each Site Consistent With Federal (clia) And Cap Training Requirements. Reagents, Controls And Supplies: Routine Reagents, Controls And Disposables (supplies) For Chemical And Microscopic Urinalysis Testing Shall Be Provided By The Vendor And Shall Adhere To The Following Requirements. Reagents Including Controls And Disposables Shall Be Identified Prior To Delivery. Reagents Including Controls And Disposables To Be Listed In A Separate Table. The Table Should Include Annual Reagent Volumes, Costs, And Shipping Charges For Each Quarterly Standing Order Delivery. Reagent Manufacturer Shelf Life Shall Be No Less Than 12 Months. Reagents For The Analyzer Are Marked For Easy Recognition By The Operator And Shall Contain The Appropriate Facility Purchase Order Number In The Delivery Address. Vendor Will Supply A List Of Reagents, Controls And Disposables That Will Be Shipped As Part Of The Order. Supplies Will Be Shipped On A Standing Order Schedule, Agreed Upon By The Government And Vendor. All Or Part Of A Future Quarterly Standing Order May Be Advanced Up To 10 Days Ahead Of The Scheduled Ship Date Of The Standing Order. Delivery Shall Be Within Four (4) Business Days Of The Prior Agreed Upon Shipment Date Or It Shall Be Considered Late. Vendor Will Provide Sufficient Reagents And Supplies For Performance Of Patient Results For All Visn 20 Sites. Consumables Will Be Provided On Demand As Needed If The Consumable Allotments Are Insufficient To Meet The Needs Of The Facility. Vendor Shall Supply All Changes To The Maintenance Schedules That Affect Reagent Or Cleaning Reagent Volumes And Shall Be Coordinated With The Va Facility Point Of Contact To Implement The Changes In Accordance With Manufacturer's Recommendations. Space Availability: All Proposed Urinalysis Equipment Must Fit The Existing Space At Each Visn 20 P&lms Facility's, Without The Need For Renovation Work. Small Scale Re-arrangement Of Furniture Is Acceptable. Fitting Existing Space Shall Include Conforming To The Current Structural Parameters Of Each Lab, In Each Facility, In Terms Of Delivery, Installation And Lab Space. (i.e., Equipment Size, Weight, Packaged Size For Delivery, Electrical/voltage). Special Requirements: In Addition To The General Requirements For The Urinalysis Cprr Requirements Stated Above, The Contractor Shall Meet The Following Special Requirements: Equipment Shall Have A Fully Established Va Veterans Health Information Systems And Technology Architecture (vista) Computer System And Cerner Interface Program Via Data Innovations Middleware, With All Downloads/software Necessary To Transfer Data Into Patient Files In Va Vista And Cerner Computer Systems Via Data Innovations Middleware, At No Additional Cost To Va. Provide Bi-directional Interface With Data Innovations And Appropriate Quality Control Analysis System And All Components Necessary To Interface With Va Vista And Cerner Computer System. The Contractor Shall Provide An Auto Verification Package Through Data Innovations For Validation Utilizing The Instrument Manager Which Includes Rules And Technical Support For The Duration Of This Contract. Contractor Shall Assist In The Establishment, Testing, Deployment, And Troubleshooting In The Full Capacity Of The Middleware Before Implementation Date. The Contractor Is Responsible For Verifying Any Software Upgrades With The Instrument During Its Life, Will Be Compatible With Data Innovations Middleware. Contractor Shall Provide Automated, Walk-away Urinalysis Chemistry Analyzer With Peripherals With Direct, Automated Sample Pathway To An Automated, Walk-away Microscopic Urinalysis Analyzer With Peripherals For Sampling And Testing. Shall Provide Data Backup. Systems Shall Provide Ease Of Use (uncomplicated Menus), With Minimal Maintenance Required. Shall Provide Flexibility In Test Volumes. Shall Be Easy To Troubleshoot. Provide Extended Expiration Date Of Supplies. Uninterruptible Power Supply (surge Protection, Battery Backup) Provided By Vendor For All Associated Electrical Instruments And Ancillary Components Excluding Printer. Provide A Water System, If Required. If A Printer Is Required To Produce Patient Or Qc Reports, One Shall Be Provided Per System And Replaced If Broken. Cessation Of Testing: If, For Any Reason, Contractor Ceases Testing Of Any Urinalysis Assays, The Contractor Must Notify The Va Contracting Office And Laboratories, 60 Calendar Days Prior To The Change. Until A New Solicitation Can Be Issued, Or The Problem Resolved, The Contractor Shall Be Held Liable For All Costs If Performance Is Ceased, As The Lab Facility May Have To Resort To Outsourcing The Tests In Order To Continue Patient Care. The Vendor Will Be Responsible For The Following: Cost Per Reportable Result Program Reagents, Controls And Supplies: Routine Reagents And Disposables. Reagents Including Controls And Disposables To Be Listed In Separate Table. Vendor Will Supply A List Of Reagents, Controls And Disposables That Will Be Shipped As Part Of The Agreement. Supplies Will Be Shipped On A Standing Order Schedule, Agreed Upon By Government And Vendor. All Or Part Of A Future Quarterly Standing Order May Be Advanced Up To 10 Days Ahead Of The Scheduled Ship Date Of The Standing Order. Vendor Will Provide Sufficient Reagents And Supplies For Performance Of Patient Results For All Visn 20 Sites. The Quality Of The Products Shall Be High Enough To Satisfy Proficiency Testing Standards Of The College Of American Pathologists (cap) And The Joint Commission (tjc). Changes In Maintenance Schedules That Affect Reagent Or Cleaning Reagent Volumes Will Be Approved By The Vendor In Accordance With Manufacturer's Recommendations. Additional Reagents, If Required, Will Be Provided By The Vendor At No Additional Charge. The Government Will Be Responsible For The Following: Cost Per Reportable Result Program: Cppr Periodic Payments: Refer To Attachment A For Volumes. Test Description Estimated Volume Per Year Price Per Reportable. During The Agreement The Government Will Report By The 10th Of Each Month, To The Vendor In Writing Or Electronically, The Number Of Reportable Results Generated In The Previous Month. The Vendor Will Invoice The Government Based On The Report Of Reportable Tests. Laboratory Manager Or Designee Will Act As Contracting Officer Representative (cotr) For This Contract. Security: Returning Leased Equipment Constitutes A Risk. Va Employees Must Sanitize Va Sensitive Information Residing On Leased Equipment Before Releasing That Equipment From Direct Va Control, Or The Media Will Not Be Returned Upon Termination Of The Contract. Per Visn 20 Va Information Security Policies, No Hard Drives Or Computer Disks Containing Va Patient Information Will Be Removed From Va Facilities. At The Time Of Turn-in Or Removal Due To Failure, The Va Facility Will Remove All Sensitive Data From Information Systems Storage Devices Or Render The Data From These Systems Unreadable. No Federal Information Processing Equipment Will Be Discontinued From Rental/lease Or Exchange Without Compliance With This Require. Contract Personnel Will Not Have Direct Access To A Va System Or Va Sensitive Information. All Work/maintenance Will Be Accomplished By Va Laboratory Personnel As An Intermediary. If Contract Leased/purchased Equipment Contains Sensitive Information (pii/phi) To Be Directly Uploaded To/downloaded From Va Systems, A Mou/isa Shall Be Established Between The Vendor And Va. Unidirectional, Deidentified Data From Contract Leased/purchased Equipment To The Va Network Shall Be Protected In Accordance With Established Va Security Policy. Quality Assurance Monitoring: The Contractor Service Requirements Are Summarized Into Performance Objectives That Relate Directly To Mission Essential Items. The Performance Thresholds Briefly Describe The Minimum Acceptable Levels Of Service Required For Each Requirement. These Thresholds Are Critical To Mission Success. Information And Information System Security/privacy General Contractors, Contractor Personnel, Subcontractors, And Subcontractor Personnel Shall Be Subject To The Same Federal Laws, Regulations, Standards, And Va Directives And Handbooks As Va And Va Personnel Regarding Information And Information System Security. Access To Va Information And Va Information Systems A Contractor/subcontractor Shall Request Logical (technical) Or Physical Access To Va Information And Va Information Systems For Their Employees, Subcontractors, And Affiliates Only To The Extent Necessary To Perform The Services Specified In The Contract, Agreement, Or Task Order. All Contractors, Subcontractors, And Third-party Servicers And Associates Working With Va Information Are Subject To The Same Investigative Requirements As Those Of Va Appointees Or Employees Who Have Access To The Same Types Of Information. The Level And Process Of Background Security Investigations For Contractors Must Be In Accordance With Va Directive And Handbook 0710, Personnel Suitability And Security Program. The Office For Operations, Security, And Preparedness Is Responsible For These Policies And Procedures. Contract Personnel Who Require Access To National Security Programs Must Have A Valid Security Clearance. National Industrial Security Program (nisp) Was Established By Executive Order 12829 To Ensure That Cleared U.s. Defense Industry Contract Personnel Safeguard The Classified Information In Their Possession While Performing Work On Contracts, Programs, Bids, Or Research And Development Efforts. The Department Of Veterans Affairs Does Not Have A Memorandum Of Agreement With Defense Security Service (dss). Verification Of A Security Clearance Must Be Processed Through The Special Security Officer Located In The Planning And National Security Service Within The Office Of Operations, Security, And Preparedness. Custom Software Development And Outsourced Operations Must Be Located In The U.s. To The Maximum Extent Practical. If Such Services Are Proposed To Be Performed Abroad And Are Not Disallowed By Other Va Policy Or Mandates, The Contractor/subcontractor Must State Where All Non-u.s. Services Are Provided And Detail A Security Plan, Deemed To Be Acceptable By Va, Specifically To Address Mitigation Of The Resulting Problems Of Communication, Control, Data Protection, And So Forth. Location Within The U.s. May Be An Evaluation Factor. The Contractor Or Subcontractor Must Notify The Contracting Officer Immediately When An Employee Working On A Va System Or With Access To Va Information Is Reassigned Or Leaves The Contractor Or Subcontractor's Employ. The Contracting Officer Must Also Be Notified Immediately By The Contractor Or Subcontractor Prior To An Unfriendly Termination. Va Information Custodial Language Information Made Available To The Contractor Or Subcontractor By Va For The Performance Or Administration Of This Contract Or Information Developed By The Contractor/subcontractor In Performance Or Administration Of The Contract Shall Be Used Only For Those Purposes And Shall Not Be Used In Any Other Way Without The Prior Written Agreement Of The Va. This Clause Expressly Limits The Contractor/subcontractor's Rights To Use Data As Described In Rights In Data - General, Far 52.227-14(d) (1). Va Information Should Not Be Co-mingled, If Possible, With Any Other Data On The Contractors/subcontractor's Information Systems Or Media Storage Systems In Order To Ensure Va Requirements Related To Data Protection And Media Sanitization Can Be Met. If Co-mingling Must Be Allowed To Meet The Requirements Of The Business Need, The Contractor Must Ensure That Va's Information Is Returned To The Va Or Destroyed In Accordance With Va's Sanitization Requirements. Va Reserves The Right To Conduct On Site Inspections Of Contractor And Subcontractor It Resources To Ensure Data Security Controls, Separation Of Data And Job Duties, And Destruction/media Sanitization Procedures Are In Compliance With Va Directive Requirements. Prior To Termination Or Completion Of This Contract, Contractor/ Subcontractor Must Not Destroy Information Received From Va, Or Gathered/ Created By The Contractor In The Course Of Performing This Contract Without Prior Written Approval By The Va. Any Data Destruction Done On Behalf Of Va By A Contractor/subcontractor Must Be Done In Accordance With National Archives And Records Administration (nara) Requirements As Outlined In Va Directive 6300, Records And Information Management And Its Handbook 6300.1 Records Management Procedures, Applicable Va Records Control Schedules, And Va Handbook 6500.1, Electronic Media Sanitization. Self-certification By The Contractor That The Data Destruction Requirements Above Have Been Met Must Be Sent To The Va Contracting Officer Within 30 Days Of Termination Of The Contract. The Contractor/subcontractor Must Receive, Gather, Store, Back Up, Maintain, Use, Disclose And Dispose Of Va Information Only In Compliance With The Terms Of The Contract And Applicable Federal And Va Information Confidentiality And Security Laws, Regulations, And Policies. If Federal Or Va Information Confidentiality And Security Laws, Regulations And Policies Become Applicable To The Va Information Or Information Systems After Execution Of The Contract, Or If Nist Issues Or Updates Applicable Fips Or Special Publications (sp) After Execution Of This Contract, The Parties Agree To Negotiate In Good Faith To Implement The Information Confidentiality And Security Laws, Regulations, And Policies In This Contract. The Contractor/subcontractor Shall Not Make Copies Of Va Information Except As Authorized And Necessary To Perform The Terms Of The Agreement Or To Preserve Electronic Information Stored On Contractor/subcontractor Electronic Storage Media For Restoration In Case Any Electronic Equipment Or Data Used By The Contractor/subcontractor Needs To Be Restored To An Operating State. If Copies Are Made For Restoration Purposes, After The Restoration Is Complete, The Copies Must Be Appropriately Destroyed. If Va Determines That The Contractor Has Violated Any Of The Information Confidentiality, Privacy, And Security Provisions Of The Contract, It Shall Be Sufficient Grounds For Va To Withhold Payment To The Contractor Or Third Party Or Terminate The Contract For Default Or Terminate For Cause Under Federal Acquisition Regulation (far) Part 12. If A Vha Contract Is Terminated For Cause, The Associated Baa Must Also Be Terminated And Appropriate Actions Taken In Accordance With Vha Handbook 1600.01, Business Associate Agreements. Absent An Agreement To Use Or Disclose Protected Health Information, There Is No Business Associate Relationship. The Contractor/subcontractor Must Store, Transport, Or Transmit Va Sensitive Information In An Encrypted Form, Using Va-approved Encryption Tools That Are, At A Minimum, Fips 140-2 Validated. The Contractor/subcontractor's Firewall And Web Services Security Controls, If Applicable, Shall Meet Or Exceed Va's Minimum Requirements. Va Configuration Guidelines Are Available Upon Request. Except For Uses And Disclosures Of Va Information Authorized By This Contract For Performance Of The Contract, The Contractor/subcontractor May Use And Disclose Va Information Only In Two Other Situations: (i) In Response To A Qualifying Order Of A Court Of Competent Jurisdiction, Or (ii) With Va's Prior Written Approval. The Contractor/subcontractor Must Refer All Requests For, Demands For Production Of, Or Inquiries About, Va Information And Information Systems To The Va Contracting Officer For Response. Notwithstanding The Provision Above, The Contractor/subcontractor Shall Not Release Va Records Protected By Title 38 U.s.c. 5705, Confidentiality Of Medical Quality Assurance Records And/or Title 38 U.s.c. 7332, Confidentiality Of Certain Health Records Pertaining To Drug Addiction, Sickle Cell Anemia, Alcoholism Or Alcohol Abuse, Or Infection With Human Immunodeficiency Virus. If The Contractor/subcontractor Is In Receipt Of A Court Order Or Other Requests For The Above Mentioned Information, That Contractor/subcontractor Shall Immediately Refer Such Court Orders Or Other Requests To The Va Contracting Officer For Response. For Service That Involves The Storage, Generating, Transmitting, Or Exchanging Of Va Sensitive Information But Does Not Require C&a Or An Mou-isa For System Interconnection, The Contractor/subcontractor Must Complete A Contractor Security Control Assessment (csca) On A Yearly Basis And Provide It To The Cor. Information System Design And Development Information Systems That Are Designed Or Developed For Or On Behalf Of Va At Non-va Facilities Shall Comply With All Va Directives Developed In Accordance With Fisma, Hipaa, Nist, And Related Va Security And Privacy Control Requirements For Federal Information Systems. This Includes Standards For The Protection Of Electronic Phi, Outlined In 45 C.f.r. Part 164, Subpart C, Information And System Security Categorization Level Designations In Accordance With Fips 199 And Fips 200 With Implementation Of All Baseline Security Controls Commensurate With The Fips 199 System Security Categorization (reference Appendix D Of Va Handbook 6500, Va Information Security Program). During The Development Cycle A Privacy Impact Assessment (pia) Must Be Completed, Provided To The Cor, And Approved By The Va Privacy Service In Accordance With Directive 6507, Va Privacy Impact Assessment. The Contractor/subcontractor Shall Certify To The Cor That Applications Are Fully Functional And Operate Correctly As Intended On Systems Using The Va Federal Desktop Core Configuration (fdcc), And The Common Security Configuration Guidelines Provided By Nist Or The Va. This Includes Internet Explorer 7 Configured To Operate On Windows Xp And Vista (in Protected Mode On Vista) And Future Versions, As Required. The Standard Installation, Operation, Maintenance, Updating, And Patching Of Software Shall Not Alter The Configuration Settings From The Va Approved And Fdcc Configuration. Information Technology Staff Must Also Use The Windows Installer Service For Installation To The Default "program Files" Directory And Silently Install And Uninstall. Applications Designed For Normal End Users Shall Run In The Standard User Context Without Elevated System Administration Privileges. The Security Controls Must Be Designed, Developed, Approved By Va, And Implemented In Accordance With The Provisions Of Va Security System Development Life Cycle As Outlined In Nist Special Publication 800-37, Guide For Applying The Risk Management Framework To Federal Information Systems, Va Handbook 6500, Information Security Program And Va Handbook 6500.5, Incorporating Security And Privacy In System Development Lifecycle. The Contractor/subcontractor Is Required To Design, Develop, Or Operate A System Of Records Notice (sor) On Individuals To Accomplish An Agency Function Subject To The Privacy Act Of 1974, (as Amended), Public Law 93-579, December 31, 1974 (5 U.s.c. 552a) And Applicable Agency Regulations. Violation Of The Privacy Act May Involve The Imposition Of Criminal And Civil Penalties. The Contractor/subcontractor Agrees To: Comply With The Privacy Act Of 1974 (the Act) And The Agency Rules And Regulations Issued Under The Act In The Design, Development, Or Operation Of Any System Of Records On Individuals To Accomplish An Agency Function When The Contract Specifically Identifies: The Systems Of Records (sor); And The Design, Development, Or Operation Work That The Contractor/ Subcontractor Is To Perform Include The Privacy Act Notification Contained In This Contract In Every Solicitation And Resulting Subcontract And In Every Subcontract Awarded Without A Solicitation, When The Work Statement In The Proposed Subcontract Requires The Redesign, Development, Or Operation Of A Sor On Individuals That Is Subject To The Privacy Act; And Include This Privacy Act Clause, Including This Subparagraph (3), In All Subcontracts Awarded Under This Contract Which Requires The Design, Development, Or Operation Of Such A Sor. In The Event Of Violations Of The Act, A Civil Action May Be Brought Against The Agency Involved When The Violation Concerns The Design, Development, Or Operation Of A Sor On Individuals To Accomplish An Agency Function, And Criminal Penalties May Be Imposed Upon The Officers Or Employees Of The Agency When The Violation Concerns The Operation Of A Sor On Individuals To Accomplish An Agency Function. For Purposes Of The Act, When The Contract Is For The Operation Of A Sor On Individuals To Accomplish An Agency Function, The Contractor/subcontractor Is Considered To Be An Employee Of The Agency. "operation Of A System Of Records" Means Performance Of Any Of The Activities Associated With Maintaining The Sor, Including The Collection, Use, Maintenance, And Dissemination Of Records. "record" Means Any Item, Collection, Or Grouping Of Information About An Individual That Is Maintained By An Agency, Including, But Not Limited To, Education, Financial Transactions, Medical History, And Criminal Or Employment History And Contains The Person's Name, Or Identifying Number, Symbol, Or Any Other Identifying Particular Assigned To The Individual, Such As A Fingerprint Or Voiceprint, Or A Photograph. "system Of Records" Means A Group Of Any Records Under The Control Of Any Agency From Which Information Is Retrieved By The Name Of The Individual Or By Some Identifying Number, Symbol, Or Other Identifying Particular Assigned To The Individual. The Vendor Shall Ensure The Security Of All Procured Or Developed Systems And Technologies, Including Their Subcomponents (hereinafter Referred To As "systems"), Throughout The Life Of This Contract And Any Extension, Warranty, Or Maintenance Periods. This Includes, But Is Not Limited To Workarounds, Patches, Hotfixes, Upgrades, And Any Physical Components (hereafter Referred To As Security Fixes) Which May Be Necessary To Fix All Security Vulnerabilities Published Or Known To The Vendor Anywhere In The Systems, Including Operating Systems And Firmware. The Vendor Shall Ensure That Security Fixes Shall Not Negatively Impact The Systems. The Vendor Shall Notify Va Within 24 Hours Of The Discovery Or Disclosure Of Successful Exploits Of The Vulnerability Which Can Compromise The Security Of The Systems (including The Confidentiality Or Integrity Of Its Data And Operations, Or The Availability Of The System). Such Issues Shall Be Remediated As Quickly As Is Practical, But In No Event Longer Than 10 Days. When The Security Fixes Involve Installing Third Party Patches (such As Microsoft Os Patches Or Adobe Acrobat), The Vendor Will Provide Written Notice To The Va That The Patch Has Been Validated As Not Affecting The Systems Within 10 Working Days. When The Vendor Is Responsible For Operations Or Maintenance Of The Systems, They Shall Apply The Security Fixes Within 10 Days. All Other Vulnerabilities Shall Be Remediated As Specified In This Paragraph In A Timely Manner Based On Risk, But Within 60 Days Of Discovery Or Disclosure. Exceptions To This Paragraph (e.g. For The Convenience Of Va) Shall Only Be Granted With Approval Of The Contracting Officer And The Va Assistant Secretary For Office Of Information And Technology. Information System Hosting, Operation, Maintenance, Or Use For Information Systems That Are Hosted, Operated, Maintained, Or Used On Behalf Of Va At Non-va Facilities, Contractors/subcontractors Are Fully Responsible And Accountable For Ensuring Compliance With All Hipaa, Privacy Act, Fisma, Nist, Fips, And Va Security And Privacy Directives And Handbooks. This Includes Conducting Compliant Risk Assessments, Routine Vulnerablity Scanning, System Patching And Change Management Procedures, And The Completion Of An Acceptable Contingency Plan For Each System. The Contractor's Security Control Procedures Must Be Equivalent, To Those Procedures Used To Secure Va Systems. A Privacy Impact Assessment (pia) Must Also Be Provided To The Cor And Approved By Va Privacy Service Prior To Operational Approval. All External Internet Connections To Va's Network Involving Va Information Must Be Reviewed And Approved By Va Prior To Implementation. Adequate Security Controls For Collecting, Processing, Transmitting, And Storing Of Personally Identifiable Information (pii), As Determined By The Va Privacy Service, Must Be In Place, Tested, And Approved By Va Prior To Hosting, Operation, Maintenance, Or Use Of The Information System, Or Systems By Or On Behalf Of Va. These Security Controls Are To Be Assessed And Stated Within The Pia And If These Controls Are Determined Not To Be In Place, Or Inadequate, A Plan Of Action And Milestones (poa&m) Must Be Submitted And Approved Prior To The Collection Of Pii. Outsourcing (contractor Facility, Contractor Equipment Or Contractor Staff) Of Systems Or Network Operations, Telecommunications Services, Or Other Managed Services Requires Certification And Accreditation (authorization) (c&a) Of The Contractor's Systems In Accordance With Va Handbook 6500.3, Certification And Accreditation And/or The Va Ocs Certification Program Office. Government- Owned (government Facility Or Government Equipment) Contractor-operated Systems, Third Party Or Business Partner Networks Require Memorandums Of Understanding And Interconnection Agreements (mou-isa) Which Detail What Data Types Are Shared, Who Has Access, And The Appropriate Level Of Security Controls For All Systems Connected To Va Networks. The Contractor/subcontractor's System Must Adhere To All Fisma, Fips, And Nist Standards Related To The Annual Fisma Security Controls Assessment And Review And Update The Pia. Any Deficiencies Noted During This Assessment Must Be Provided To The Va Contracting Officer And The Iso For Entry Into Va's Poa&m Management Process. The Contractor/subcontractor Must Use Va's Poa&m Process To Document Planned Remedial Actions To Address Any Deficiencies In Information Security Policies, Procedures, And Practices, And The Completion Of Those Activities. Security Deficiencies Must Be Corrected Within The Timeframes Approved By The Government. Contractor/subcontractor Procedures Are Subject To Periodic, Unannounced Assessments By Va Officials, Including The Va Office Of Inspector General. The Physical Security Aspects Associated With Contractor/ Subcontractor Activities Must Also Be Subject To Such Assessments. If Major Changes To The System Occur That May Affect The Privacy Or Security Of The Data Or The System, The C&a Of The System May Need To Be Reviewed, Retested And Re- Authorized Per Va Handbook 6500.3. This May Require Reviewing And Updating All Of The Documentation (pia, System Security Plan, Contingency Plan). The Certification Program Office Can Provide Guidance On Whether A New C&a Would Be Necessary. The Contractor/subcontractor Must Conduct An Annual Self Assessment On All Systems And Outsourced Services As Required. Both Hard Copy And Electronic Copies Of The Assessment Must Be Provided To The Cor. The Government Reserves The Right To Conduct Such An Assessment Using Government Personnel Or Another Contractor/subcontractor. The Contractor/subcontractor Must Take Appropriate And Timely Action (this Can Be Specified In The Contract) To Correct Or Mitigate Any Weaknesses Discovered During Such Testing, Generally At No Additional Cost. Va Prohibits The Installation And Use Of Personally-owned Or Contractor/ Subcontractor- Owned Equipment Or Software On Va's Network. If Non-va Owned Equipment Must Be Used To Fulfill The Requirements Of A Contract, It Must Be Stated In The Service Agreement, Sow Or Contract. All Of The Security Controls Required For Government Furnished Equipment (gfe) Must Be Utilized In Approved Other Equipment (oe) And Must Be Funded By The Owner Of The Equipment. All Remote Systems Must Be Equipped With, And Use, A Va-approved Antivirus (av) Software And A Personal (host-based Or Enclave Based) Firewall That Is Configured With A Va- Approved Configuration. Software Must Be Kept Current, Including All Critical Updates And Patches. Owners Of Approved Oe Are Responsible For Providing And Maintaining The Anti-viral Software And The Firewall On The Non-va Owned Oe. All Electronic Storage Media Used On Non-va Leased Or Non-va Owned It Equipment That Is Used To Store, Process, Or Access Va Information Must Be Handled In Adherence With Va Handbook 6500.1, Electronic Media Sanitization Upon: (i) Completion Or Termination Of The Contract Or (ii) Disposal Or Return Of The It Equipment By The Contractor/subcontractor Or Any Person Acting On Behalf Of The Contractor/subcontractor, Whichever Is Earlier. Media (hard Drives, Optical Disks, Cds, Back-up Tapes, Etc.) Used By The Contractors/ Subcontractors That Contain Va Information Must Be Returned To The Va For Sanitization Or Destruction Or The Contractor/subcontractor Must Self-certify That The Media Has Been Disposed Of Per 6500.1 Requirements. This Must Be Completed Within 30 Days Of Termination Of The Contract. Bio-medical Devices And Other Equipment Or Systems Containing Media (hard Drives, Optical Disks, Etc.) With Va Sensitive Information Must Not Be Returned To The Vendor At The End Of Lease, For Trade-in, Or Other Purposes. The Options Are: Vendor Must Accept The System Without The Drive; Va's Initial Medical Device Purchase Includes A Spare Drive Which Must Be Installed In Place Of The Original Drive At Time Of Turn-in; Or Va Must Reimburse The Company For Media At A Reasonable Open Market Replacement Cost At Time Of Purchase. Due To The Highly Specialized And Sometimes Proprietary Hardware And Software Associated With Medical Equipment/systems, If It Is Not Possible For The Va To Retain The Hard Drive, Then; The Equipment Vendor Must Have An Existing Baa If The Device Being Traded In Has Sensitive Information Stored On It And Hard Drive(s) From The System Are Being Returned Physically Intact; And Any Fixed Hard Drive On The Device Must Be Non-destructively Sanitized To The Greatest Extent Possible Without Negatively Impacting System Operation. Selective Clearing Down To Patient Data Folder Level Is Recommended Using Va Approved And Validated Overwriting Technologies/methods/tools. Applicable Media Sanitization Specifications Need To Be Pre- Approved And Described In The Purchase Order Or Contract. A Statement Needs To Be Signed By The Director (system Owner) That States That The Drive Could Not Be Removed And That (a) And (b) Controls Above Are In Place And Completed. The Iso Needs To Maintain The Documentation. Security Incident Investigation The Term "security Incident" Means An Event That Has, Or Could Have, Resulted In Unauthorized Access To, Loss Or Damage To Va Assets, Or Sensitive Information, Or An Action That Breaches Va Security Procedures. The Contractor/ Subcontractor Shall Immediately Notify The Cor And Simultaneously, The Designated Iso And Privacy Officer For The Contract Of Any Known Or Suspected Security/privacy Incidents, Or Any Unauthorized Disclosure Of Sensitive Information, Including That Contained In System(s) To Which The Contractor/ Subcontractor Has Access. To The Extent Known By The Contractor/subcontractor, The Contractor/ Subcontractor's Notice To Va Shall Identify The Information Involved, The Circumstances Surrounding The Incident (including To Whom, How, When, And Where The Va Information Or Assets Were Placed At Risk Or Compromised), And Any Other Information That The Contractor/subcontractor Considers Relevant. With Respect To Unsecured Protected Health Information, The Business Associate Is Deemed To Have Discovered A Data Breach When The Business Associate Knew Or Should Have Known Of A Breach Of Such Information. Upon Discovery, The Business Associate Must Notify The Covered Entity Of The Breach. Notifications Need To Be Made In Accordance With The Executed Business Associate Agreement. In Instances Of Theft Or Break-in Or Other Criminal Activity, The Contractor/subcontractor Must Concurrently Report The Incident To The Appropriate Law Enforcement Entity (or Entities) Of Jurisdiction, Including The Va Oig And Security And Law Enforcement. The Contractor, Its Employees, And Its Subcontractors And Their Employees Shall Cooperate With Va And Any Law Enforcement Authority Responsible For The Investigation And Prosecution Of Any Possible Criminal Law Violation(s) Associated With Any Incident. The Contractor/subcontractor Shall Cooperate With Va In Any Civil Litigation To Recover Va Information, Obtain Monetary Or Other Compensation From A Third Party For Damages Arising From Any Incident, Or Obtain Injunctive Relief Against Any Third Party Arising From, Or Related To, The Incident. Liquidated Damages For Data Breach Consistent With The Requirements Of 38 U.s.c. 5725, A Contract May Require Access To Sensitive Personal Information. If So, The Contractor Is Liable To Va For Liquidated Damages In The Event Of A Data Breach Or Privacy Incident Involving Any Spi The Contractor/subcontractor Processes Or Maintains Under This Contract. The Contractor/subcontractor Shall Provide Notice To Va Of A "security Incident" As Set Forth In The Security Incident Investigation Section Above. Upon Such Notification, Va Must Secure From A Non-department Entity Or The Va Office Of Inspector General An Independent Risk Analysis Of The Data Breach To Determine The Level Of Risk Associated With The Data Breach For The Potential Misuse Of Any Sensitive Personal Information Involved In The Data Breach. The Term 'data Breach' Means The Loss, Theft, Or Other Unauthorized Access, Or Any Access Other Than That Incidental To The Scope Of Employment, To Data Containing Sensitive Personal Information, In Electronic Or Printed Form, That Results In The Potential Compromise Of The Confidentiality Or Integrity Of The Data. Contractor Shall Fully Cooperate With The Entity Performing The Risk Analysis. Failure To Cooperate May Be Deemed A Material Breach And Grounds For Contract Termination. Each Risk Analysis Shall Address All Relevant Information Concerning The Data Breach, Including The Following: Nature Of The Event (loss, Theft, Unauthorized Access); Description Of The Event, Including: Date Of Occurrence; Data Elements Involved, Including Any Pii, Such As Full Name, Social Security Number, Date Of Birth, Home Address, Account Number, Disability Code; Number Of Individuals Affected Or Potentially Affected; Names Of Individuals Or Groups Affected Or Potentially Affected; Ease Of Logical Data Access To The Lost, Stolen Or Improperly Accessed Data In Light Of The Degree Of Protection For The Data, E.g., Unencrypted, Plain Text; Amount Of Time The Data Has Been Out Of Va Control; The Likelihood That The Sensitive Personal Information Will Or Has Been Compromised (made Accessible To And Usable By Unauthorized Persons); Known Misuses Of Data Containing Sensitive Personal Information, If Any; Assessment Of The Potential Harm To The Affected Individuals; Data Breach Analysis As Outlined In 6500.2 Handbook, Management Of Security And Privacy Incidents, As Appropriate; And Whether Credit Protection Services May Assist Record Subjects In Avoiding Or Mitigating The Results Of Identity Theft Based On The Sensitive Personal Information That May Have Been Compromised. Based On The Determinations Of The Independent Risk Analysis, The Contractor Shall Be Responsible For Paying To The Va Liquidated Damages In The Amount Of $42.00 Per Affected Individual To Cover The Cost Of Providing Credit Protection Services To Affected Individuals Consisting Of The Following: Notification; One Year Of Credit Monitoring Services Consisting Of Automatic Daily Monitoring Of At Least 3 Relevant Credit Bureau Reports; Data Breach Analysis; Fraud Resolution Services, Including Writing Dispute Letters, Initiating Fraud Alerts And Credit Freezes, To Assist Affected Individuals To Bring Matters To Resolution; One Year Of Identity Theft Insurance With $20,000.00 Coverage At $0 Deductible; And Necessary Legal Expenses The Subjects May Incur To Repair Falsified Or Damaged Credit Records, Histories, Or Financial Affairs. Security Controls Compliance Testing On A Periodic Basis, Va, Including The Office Of Inspector General, Reserves The Right To Evaluate Any Or All Of The Security Controls And Privacy Practices Implemented By The Contractor Under The Clauses Contained Within The Contract. With 10 Working-day's Notice, At The Request Of The Government, The Contractor Must Fully Cooperate And Assist In A Government-sponsored Security Controls Assessment At Each Location Wherein Va Information Is Processed Or Stored, Or Information Systems Are Developed, Operated, Maintained, Or Used On Behalf Of Va, Including Those Initiated By The Office Of Inspector General. The Government May Conduct A Security Control Assessment On Shorter Notice (to Include Unannounced Assessments) As Determined By Va In The Event Of A Security Incident Or At Any Other Time. Training All Contractor Employees And Subcontractor Employees Requiring Access To Va Information And Va Information Systems Shall Complete The Following Before Being Granted Access To Va Information And Its Systems: Sign And Acknowledge (either Manually Or Electronically) Understanding Of And Responsibilities For Compliance With The Contractor Rules Of Behavior, Appendix E Relating To Access To Va Information And Information Systems; Successfully Complete The Va Cyber Security Awareness And Rules Of Behavior Training And Annually Complete Required Security Training; Successfully Complete The Appropriate Va Privacy Training And Annually Complete Required Privacy Training; And Successfully Complete Any Additional Cyber Security Or Privacy Training, As Required For Va Personnel With Equivalent Information System Access [to Be Defined By The Va Program Official And Provided To The Contracting Officer For Inclusion In The Solicitation Document - E.g., Any Role-based Information Security Training Required In Accordance With Nist Special Publication 800-16, Information Technology Security Training Requirements.] The Contractor Shall Provide To The Contracting Officer And/or The Cor A Copy Of The Training Certificates And Certification Of Signing The Contractor Rules Of Behavior For Each Applicable Employee Within 1 Week Of The Initiation Of The Contract And Annually Thereafter, As Required. Failure To Complete The Mandatory Annual Training And Sign The Rules Of Behavior Annually, Within The Timeframe Required, Is Grounds For Suspension Or Termination Of All Physical Or Electronic Access Privileges And Removal From Work On The Contract Until Such Time As The Training And Documents Are Complete.