Batangas Medical Center Tender

Description October 29, 2024 Request For Quotation (rfq) Various Ophthalmology Supplies 1. The Batangas Medical Center Hereinafter Referred To As The “purchaser” Now Request For Submission Of Price Proposal For The Procurement Of The Aforesaid Item Described In The Technical Specifications. 2. A Set Of Technical Specifications Are Provided In The Following Attachment. All Items And Jobs Listed Under The Purchaser’s Specifications Must Be Complied With On A Pass-fail Basis. Failure To Meet Any One Of The Requirements May Result In Rejection Of The Proposal. 3. Procurement Procedures Will Be Conducted In Accordance With The Provisions Of The Revised Implementing Rules And Regulations (irr) Of Republic Act 9184 4. It Is The Intent Of The Purchaser To Evaluate The Bid/proposal On A Per Item Basis, And Award Will Be Made To The Bid/quotation Or Combination Of Quotations Resulting In The Lowest Evaluated Quotation Meeting The Purchaser’s Technical Specifications. 5. Prices Must Be Quoted In The Philippine Peso And Must Be Include The Unit Price And Total Price, Inclusive Of All Taxes To Be Paid And Other Incidental Cost To The Delivery Site/s If The Contract Is Awarded. 6. Quotations That Exceeds The Approved Budget For The Contract Shall Be Rejected. 7. In Case Two Or More Bidders Are Determined To Have Submitted The Lowest Calculated And Responsive Quotation, The Purchaser Shall Adopt And Employ “draw Lots” As The Tie-breaking Method To Finally Determine The Single Winning Provider In Accordance With Gppb Circular 06-2005. 8. Bid/proposal May Be Typewritten And May Be Placed In A Sealed Envelope Marked “various Ophthalmology Supplies” And Delivered At The Procurement Section, Batangas Medical Center, Kumintang Ibaba, Batangas City Or You May Send Your Bid/quotation Through E-mail At Canvasscommittee@batmc.phnot Later Than 12:00pm On November 5, 2024 9. The Prospective Bidder Shall Submit The Following: I. Completely And Correctly Filled-out Attachment 1 (technical Specifications) And Request For Quotation (rfq) Form. Ii. Documentary Requirements (for Small Value Procurement) A. Bir Certificate Of Registration Shall Be Submitted In Lieu Of Dti Registration And Mayor’s Permit B. Philgeps Reg. Number C. Income/business Tax Return (for Abcs Above P500k) D. Omnibus Sworn Statement (for Abcs Above P50k) E. Professional License/curriculum Vitae (for Consulting Services Only) F. Pcab License (for Infra. Only) G. For Procurement Of Medical And Surgical Supplies, And Medical Devices: O Iso Certification Of The Manufacturer O If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/dealer Of The Product/items O License To Operate From Fda With List Of Sources (whether It Is A Manufacturer, Importer, Seller Or Distributor) O Certificate Of Product Registration From Food And Drug Administration (fda) H. For Procurement Of Drugs And Medicines: O Certificate Of Product Registration From Food And Drug Administration (fda) O Certificate Of Good Manufacturing Practices From Fda O If The Supplier Is Not The Manufacturer, Certification From The Manufacturer That The Supplier Is An Authorized Distributor/dealer Of The Product/items O License To Operate From Fda With List Of Sources (whether It Is A Manufacturer, Importer, Seller Or Distributor) O Certification By The Medical Officer That Medicines And Drugs Requisitioned Is Included In The Pndf Current Edition O Delivery Receipt/invoice Bearing Lot Nos. And Expiry Dates Of The Drugs And Medicines O Lot Or Batch Release Certification To Vaccines, Toxoids And Immunoglobulins Is Required, Before Acceptance By The Procuring Entity Of The Delivered Supplies Iii. Documentary Requirements (for Shopping Sec 52.1(b)) A. Mayor’s/business Permit B. Philgeps Reg. Number 10. Late Submission Of Quotations Shall Not Be Accepted And Considered. 11. Bids/proposal Shall Be Valid For Sixty (60) Calendar Days From The Deadline Of Submission Of Bids. The Purchaser May Request For Extension Of The Validity Period Of Price Quotation In Case The Award Cannot Be Made Within The 60-day Validity Period. 12. The Delivery Period Shall Be Within Ten (10)calendar Days From Receipt Of The Purchase Order. The Contractor Should Inform The Purchaser At Least Three (3) Days Before The Date Of Delivery. The Delivery Will Be Made Only During Working Days And Hours. 13. Delivery Site: Material Management Section Batangas Medical Center Kumintang Ibaba, Batangas City 14. Warranty Security Shall Be Required From The Contract Awardee For A Minimum Period Of Three (3) Months, In The Case Of Expendable Supplies, Or A Minimum Period Of One (1) Year, In The Case Of Non-expendable Supplies, After Acceptance By The Procuring Entity Of The Delivered Supplies. 15. The Applicable Rate For The Deliveries Is One Tenth (1/10) Of One (1) Percent Of The Cost Of The Unperformed Portion Of The Contract For Every Day Of Delay. The Maximum Deduction Shall Be Ten Percent (10%) Of The Amount Of Contract. Once The Cumulative Amount Of Liquidated Damages Reaches Ten Percent (10%) Of The Contract Amount, The Purchaser Shall Rescind The Contract Without Prejudice To Other Courses Of Action And Remedies Open To It. 16. The Purchaser Reserves The Right To Accept Or Reject Any Proposal, And To Annul The Procurement Process Or Reject All Proposals At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder/bidders. The Purchaser Also Reserves The Right To Waive Minor Deviations/defects Or Infirmities Therein. A Minor Deviation/defect Or Infirmity Is One That Does Not Materially Affect The Overall Functionality Of The Material And The Capability Of The Supplier To Perform The Contract. Sgd. Merlita G. Publico, Md, Mha, Fpafp Hbac Chairperson Attachment 1 Technical Specifications Purchaser’s Specifications Bidder’s Specifications Various Ophthalmology Supplies Total Abc – Php393,500.00 60 Piece – Orbital Implants With Conformers 12mm-26mm - Abc Php – 1,000.00 20 Piece- Iris Retractors- Disposable, Flexible With Stopper, Any Dimension – Abc Php – 900.00 5 Piece – Lacrimal Intubation Stent – Bicanalicular With Olive Tip - #25 Single Use Flexible With Metal Probes – Olive Tipped Or Blunt Tipped – Abc Php – 6,500.00 5 Piece – Lacrimal Intubation Stent Mini Monoka, Silicone- #26 Single Use Flexible With Metal Probes – Olive Tipped Or Blunt Tipped – Abc Php – 5,000.00 40 Piece – Capsular Tension Ring Pmma – (13-11mm), 11 Mm Diameter When Compresses 13 Mm When Not Compressed – Abc Php - 5,000.00 2,000 Piece – Transparent Film Dressing, 10cm X 12cm – Polyurethane Plastic Film Sterile Latex Free Hypoallergenic Acrylate Adhesive Dressing – Abc Php – 29.00 Request For Quotation Form Date: ____________ Rfq No.: 2024-10-0290 Attention: Procurement Section Batangas Medical Center Kumintang Ibaba, Batangas City 1.) Having Examined The Subject Request For Quotation (rfq) Including The Technical Specifications, We, The Undersigned Offer To Supply And Deliver The Following: Description Quantity Delivery Site Unit Price (php) Total Price (php) • Please Indicate The Brand And Model Of The Product Being Offered. (if Applicable) 2.) We Undertake, If Our Quotation Or Bid Is Accepted, To Deliver The Above Goods Within The Ten (10) Day Delivery Period From Receipt Of Purchase Order (po) Or Job Order (jo). 3.) We Agree To Abide By This Quotation/bid For A Period Of Sixty (60) Days After The Deadline Of Submission Specified In The Rfq. We Agree In Case The Batmc May Request For Extension Of The Validity Period Of Price Quotation In Case The Award Cannot Be Made Within The 60-day Validity Period. 4.) We Understand That Payment For Items Delivered Will Be Processed To The Winning Supplier Within 30 Days Upon The Inspection And Acceptance Of Goods Delivered And Upon Submission Of The Required Supporting Documents, In Accordance With Existing Government Accounting Rules And Regulations. Name Of Company : _________________________________________ Postal Address : __________________________________________ Email Address : __________________________________________ Telephone & Fax No. : __________________________________________ Supplier’s Representative : __________________________________________ Signature Over Printed Name : __________________________________________ Designation : __________________________________________