Architect Tenders

Details: This Is A Solicitation Notice For Acquisition Is To Acquire A Construction-manager As Constructor (cmc) For The Houlton Land Port Of Entry (lpoe), Interstate 95 & Us/canada Border, Houlton, Maine, Me0661bh. The Requirements For This Project Will Comply With The Gsa, U.s. Customs And Border Protection (cbp) Guidelines. This Is A Major Renovation And Alternation Project That Follow The Gsa Design Excellence Guidelines, The Gsa Facilities Standards For The Public Buildings Service (p-100) 2022, And The 2023 Lpoe Design Guide For U.s. Customs & Border Protection (cbp). This Project Is Categorized As A "repair & Alterations" For Application Of The Gsa P-100. the Cmc Shall Be A Member Of The Project Development Team During The Design And Construction Phases. This Project Is Part Of The Bipartisan Infrastructure Law (bil) Program, During The Design And Construction Phases. The Cmc Selected For This Project Shall Work With The Gsa And Gsa’s Selected Architect And Engineer (a/e) Firm, Commissioning Agent (cxa), And Construction Manager As Agent (cma). The Services Requested Of The Cmc Shall Cover A Wide Range Of Design And Construction Activities, Such As: Constructability Reviews, Cost Estimating, Work Phasing Reviews, Scheduling And General Construction Services. During The Design Development (dd) And Construction Document (cd) Phases, The A/e And The Cmc Will Collaborate On The Design, Constructability Issues, Schedule, Cost, Through A Process That Is Similar To Value Management. The Goal Of This Collaboration Is To Establish A Final Estimated Cost Of Work That Does Not Exceed The Original Target Ecw (as Set Forth In The A/e Contractor’s Proposal). The Cmc's Involvement During The Project Design Stage Offers The Government The Ability To Identify Current Market Conditions Concerning Labor And Material Availability, Constructability Issues, And Any Phasing And Sequencing Impacts. The Cmc Is At Risk And Is Responsible For Involvement In The Project Development And Administration Of The Construction. The Cmc Contractor Will Be Responsible For Construction Of The Port Should The Construction Option Under The Contract Be Exercised. the Magnitude Of Construction Is Estimated Within The Range Of $22,000,000.00 And $32,000,000.00. Offerors Are Cautioned That Price Proposals Exceeding This Range May Be Determined Ineligible For Award Based On Budgetary Limitations. This Range Does Include Potential Inflation Reduction Act (ira) Funding. due To The Project Magnitude, Employing A Cmc Will Reduce Many Of The Potential Project Risks Insofar As One Central Party Will Be Responsible For Managing The Coordination Of All Contracting Entities (i.e. Subcontractors) Necessary To Complete The Project Within Budget, On Time, And Most Efficiently. Moreover, One Responsible Party Will Possess A Better Understanding Of The Project’s Challenges And Will Consequently Have More Thorough Knowledge Of How To Best Complete The Project. Finally, The Cmc Will Be Able To Identify Current Market Conditions Concerning Labor And Material Availability And The Impact That Has To The Overall Project. ­­the Houlton Land Point Of Entry (lpoe) Is Located At 27 Customs Loop, Houlton, Me. It Is A Large-scale New England Crossing Of About 37,561 Gsf And Operates 24/7 At The Terminus Of Interstate 95 (i-95) And Occupies 7.8 Acres. The Corresponding Canadian Border Station Is Woodstock Station, New Brunswick, Ca. The Lpoe Facility Consists Of A Group Of Four (4) Buildings, Constructed In 1985. The Main Port Building, Cbp Commercial Inspection Building And Fda/gsa/aphis Building Are Owned And Maintained By The Gsa. The Nii Building Is Maintained By Cbp, But Gsa Has Ultimate Custody And Control Of That Structure. The Buildings Are Not Eligible To Be Listed On The National Register Of Historic Places. the Facility Was Constructed In 1985 And Is 39 Years Old. In 2015, An Extra Field Investigation (efi) Study Determined That There Are Substantial Repairs Needed To The Entire Exterior Envelope. In The Years Since The Completion Of The Study, The Exterior Walls And Window Systems Have Further Deteriorated. The 2015 Study Only Provided The Assessment Of Envelope-related Systems. in 2018, A Facility Assessment Report (far) Was Conducted Providing A More Thorough Study Of All Building, Systems, Land And Structures Identified In The Scope. Subsequently, The Gsa Region 1 Strongly Emphasized That All Building Systems At This Facility Require Replacement Or Significant Reinvestment And Undertook A Formal Program Development Study (pds) In 2021 To Develop A Project Directives, Budget And Implementation Plan To Correct Deficiencies That Had Been Identified. the Project Will Be Completed As Expeditiously As Possible To Mitigate The Disruptions To Both The Cbp Mission And General Public. planned Repairs And Alterations Include: new Building Envelope Components (roofing, Windows, Exterior Wall Panels, Storefront Systems, Exterior Doors And Frames, Building Sealants) For The Main Port Building. upgrades To Life Safety & Fire Protection Systems, Plumbing Systems, Mechanical Systems (geothermal), And Electrical Systems For The Main Port Building. optional - Limited Site Civil Work For Items In Need Of Repair Including Water Service Lines And Underground Water Storage For Fire Suppression Sprinkler Systems. optional - New Primary And Secondary Generators. optional - New Building Envelope Components (roofing, Windows, Exterior Wall Panels, Storefront Systems, Exterior Doors And Frames, Building Sealants) For The Cbp Commercial Inspection And Fda/gsa/aphis Buildings. optional – Upgrades To Life Safety And Fire Protection System For The Cbp And Fda/gsa/aphis Buildings. meeting All Accessibility Standards. incorporating Sustainability Features And Advancing Community Goals Per The Bipartisan Infrastructure Law (november 15, 2021). use Of Low Embodied Carbon Building Materials And Implementing Sustainable Technologies Per The Inflation Reduction Act Of 2022. ira Funding For This Project Is Dependent On The Contractor’s Ability To Procure And Utilize Ira Eligible Materials And Equipment. For Low Embodied Carbon (lec) Materials And Emerging & Sustainable Technologies (e&st), The Contractor Shall Price Alternates For Traditional Materials. Refer To Gsa 012300 Alternates For Additional Information. in Accordance With The Inflation Reduction Act Of 2022 Requirements, This Project Is Funded In Part By Sections 60503 And 60504 Of The Inflation Reduction Act Of 2022 (ira). Section 60503 Low Embodied Carbon (lec) Materials Provides Funding For Purchase Of Construction Materials With Substantially Lower Levels Of Embodied Greenhouse Gas Emissions. Section 60504 Emerging Technologies Provides Funding For Emerging And Sustainable Technology (e&st) Scope. The Ira Requirements Supersede Lec Requirements Referenced In Gsa P-100 Facilities Standards. regarding Low Embodied Carbon (lec) Materials, This Project Requires The Contractor To Acquire And Install Ira-eligible Materials That Adhere To The Global Warming Potential Ira Limits Established In The Contract. Ira-eligible Materials Shall Be Purchased And Properly Installed Per The Agreement, Scope Of Work, Drawings And Specifications. Unless Otherwise Specified, All Work Requiring Use Of Materials With A Contractually Established Ira Limit Shall Utilize Materials Compliant With Those Limits. For Each Type Of Ira-eligible Material, The Contractor Shall Provide Submittals Of Environmental Product Declarations (epd) And Product Information -- See Division One Specification, Submittal Procedures, 013300. ira-eligible Material Scope Item(s) Shall Be Integrated Into The Project’s Phasing, Scheduling, Reporting, And Scope, To Support Overall Project Goals. Limit Area Of Disturbance Or Work Area For Ira-eligible Material Scope Item(s) To The Minimum Practical Area. Work Area Or Area Of Disturbance Shall Be Restored To Pre-project Or New Condition. Regarding Emerging And Sustainable Technologies (e&st), The Work Includes Installation And Construction Of Ira-funded Emerging And Sustainable Technology (e&st) Scope Items Including Photovoltaics, Heat Pumps, Networked Led Fixtures And Controls, And Advanced Insulations. Ira-funded E&st Scope Items Shall Be Constructed, Installed, And Certified As Complete And Operable. Ira-funded E&st Scope Items Shall Be Integrated Into The Project And Conform With The Overall Project Schedule. Limit Area Of Disturbance Or Work Area For E&st Scope Items To The Minimum Practical Area. under The Cost Accounting And Clin Structure, The Inflation Reduction Act Has Strict Accounting And Contract Line-item Formatting Requirements. The Cmc Contractor Must Segregate And Track Costs Applicable To The Inflation Reduction Act And Work With The Gsa Pm And Contracting Officer To Ensure Compliance With The Accounting Requirements. Refer To Supplemental Pricing And Invoicing Instructions For Projects Funded By The Inflation Reduction Act Of 2022. as Noted In The Agreement (released At Time Of Solicitation Is Issued), The Cmc’s Tasks Are Primarily Separated Into Two Distinct Phases: (1) Pre-construction Phase Services, Which Is A Firm Fixed Price (ffp) Contract; And (2) Construction Phase Work Which Is A Guaranteed Maximum Price (gmp) Fixed Price Incentive (fpi) Contract Which Is Awarded As The Construction Option. A Fixed-price Incentive Contract Is A Fixed-price Contract That Provides For Adjusting Profit And Establishing The Final Contract Price By Application Of A Formula Based On The Relationship Of Total Final Negotiated Cost To Total Target Cost. The Final Price Is Subject To A Price Ceiling, Negotiated At The Outset. gsa Intends To Award The Cmc Contract Pursuant To The Federal Acquisition Regulation (far) 15.101, Best Value Continuum. The Scope Of Cmc Services Under This Proposed Contract Includes Design Phase Services And Construction Phase Services. The Cmc Will Be Competitively Chosen Using The Source Selection (far Part 15) Procedures. The Objective Of The Source Selection Process Is To Select A Proposal The Represents The Best Value To The Government. Cmc Is A Design-assist Project Delivery Method That Allows An Owner To Engage The Constructor Early In The Project To Assist In Defining The Construction Requirement As Well As Preparing Construction Cost Estimates, Schedule Estimates, And Constructability Reviews. Both Technical Proposals And Price Proposals Need To Be Clearly Labelled So That The Technical Proposals Can Be Evaluated Separately By The Source Selection Evaluation Board In Accordance With Far Part 15.101. One Contractor Will Be Awarded Using Competitive Negotiation. This Procurement Will Be Open To Both Large And Small Business Firms. The Firm (if Not A Small Business) Shall Be Required To Present An Acceptable Small Business Subcontracting Plan In Accordance With Far 19.7, As Part Of Its Proposal. The Government Reserves The Right To Make Award On Initial Offers, But Discussions May Be Held If Appropriate. The Design Phase Services Are Anticipated To Commence Upon Award Of The Contract. the Solicitation (rfp) Will Be Issued Electronically Via Sam At Http://www.sam.gov/. Gsa Intends To Solicit And Negotiate A Construction Manager As Constructor (cmc) Contract That Can Best Demonstrate Competence And Qualification For Contract Award. at The Time Of The Release Of The Solicitation, Bidders Will Use A Bid Sheet Set Up Like This: summary design Phased Services base Bid: main Port Building - Exterior Building (facade, Aluminum Storefronts, Windows Entrances, Roof, Exterior Hollow Metal Doors, Frames, Building Sealants) main Port Building - Life Safety And Fire Protection Systems main Port Building – Accessibility main Port Building - Mechanical Systems main Port Building - Plumbing Systems main Port Building - Electrical Systems (plus Transformer) bid Options: site Systems - Water Supply primary Emergency Generator secondary Emergency Generator fda/gsa/aphis Building - Exterior Building Envelope (facade, Aluminum Storefronts, Windows Entrances, Roof, Exterior Hollow Metal Doors, Frames, Building Sealants) commercial Inspection Building - Exterior Building Envelope (facade, Aluminum Storefronts, Windows Entrances, Roof, Exterior Hollow Metal Doors, Frames, Building Sealants) fda/gsa/aphis Building - Life Safety And Fire Protection Systems commercial Inspection Building - Life Safety And Fire Protection Systems the Cmc Delivery Method Will Allow Full Collaboration Between The Cmc Contractor And The Architect-engineer Contractor Throughout The Design And Construction Process. Design Phase Services For The Cmc Will Include But Are Not Limited To Process Design Phase Services For The Cmc, To Review And Becoming Familiar With The Scope Of Services Under The A/e’s Contract, Especially The Various Standards, Guidelines, Policies, And Documents That The A/e Is Required To Follow In Developing The Design And Construction Documents. This Review And Familiarization Are Vitally Important Because The Main Tasks Of The Cmc Contractor During The Design Phase Services Are To Provide Constructability And Cost Estimation Reviews Of The A/e’s Design Related Submissions. At Its Core, The Cmc Contractor Will Help To Ensure That The Design And Construction Documents Will Enable The Government To Exercise The Guaranteed Maximum Price (gmp) Option At A Price That Is At Or Below The Gmp. Subject To The Exercise Of The Gmp Option, The Cmc Shall Provide All Supervision, Labor, Materials, And Equipment To Provide All Required Construction Services For The Preservation Of Significant Historical Aspects, Construction For Backfill Of Tenant Space, And Modernization Of Building Systems To Create An Efficient, And Comfortable Working Environment. the Government Has Hired An A/e Firm Who Is Currently Working On The Concept Design. The Government Has Also Retained An Independent Construction Manager As Advisor (cma) To Assist In Procurement Activities And Any Other Activities Required. A Commission Agent (cxa) Has Also Been Procured For This Project. All Parties Will Be Expected To Cooperate And Partner With The Goal Of Successfully Completing A Design And Construction Project On-time And On Budget. A Pre-proposal Conference And Site Visit Will Take Place, The Date To Be Determined And Will Be Confirmed In The Solicitation. all Submissions Are Due Electronically By No Later Than 2:00pm Eastern Standard Time On December 3, 2024. The Offeror Shall Submit Electronic Copies Only. No Hard Copies Of The Rfp Will Be Accepted. The Rfp Shall Be Sent To Michele Valenza, Contracting Officer At Michele.valenza@gsa.gov And Paul.murphy@gsa.gov. Late Responses Are Subject To Far 52.208. This Procurement Is Not Set Aside For Small Business; Both Small And Large Businesses Are Encouraged To Participate. The Naics Code Is 236220 – Commercial And Institutional Building Construction. the Government Is Not Responsible For Any Travel, Living Expenses, Computer Time Or Hookups For The Prime Or The Consultants During The Selection Process. this Procurement Will Be Solicited As Full And Open Competition. the North American Industry Classification System (naics) Code For This Acquisition Is 236220 (commercial And Institutional Building Construction). The Small Business Size Standard Is $39.5 Million Average Annual Receipts. competitive Proposals Shall Be Evaluated Based On The Factors Specified In The Solicitation. it Is Anticipated That The Non-price Technical Factors Will Be Broken Down, As Follows: factor 1: Experience In Providing Design Phase Services And Construction Phase Service On Similar Projects (30%) factor 2: Management And Technical Approach (design Phase Services And Construction Phase Services (20%) factor 3: Qualifications And Experience Of Key Personnel (15%) factor 4: Past Performance In Providing Design Phase Services And Construction Phase Services On Similar Projects Provided Under Factor #1 (15%) factor 5: Sustainability (15%) factor 6: Small Business Participation (5%) important Notes: (1) A Bid Guarantee Will Be Required Ninety (90) Calendar Days Prior To The Exercise Of The Gmp Option For Construction Services. The Contractor Shall Furnish Required Performance And Payment Bonds Within Fourteen (14) Calendar Days Of Exercise Of The Gmp Option. (2) In Accordance With Far 30.101, Cost Accounting Standards, The Contractor Must Demonstrate Their Compliance With Cost Accounting Standards. Award Shall Not Be Made To Any Contractor That Is Not Cas Compliant. the Proposals May Require Cas Disclosures And Certifications In Accordance With Far 52.230-1 And Far 52.230-7. by Participating In The Competition, Offerors Consent To Gsa Sharing Their Suppliers’ Names And The Global Warming Potential Values Associated With Suppliers’ Materials With The Successful Offeror. Such Information May Also Be Disclosed Publicly Or Used To Inform Other Low Embodied Carbon Procurement Activities. Technical Solutions, Supplier Pricing, And Supplier-offeror Terms And Conditions Will Not Be Shared, In Accordance With The Procurement Integrity Act. to Ensure That You Receive All Information Regarding This Solicitation, Please Register To Receive Updates At Www.sam.gov, Follow The Procedures For Notification Registration.interested Parties/how To Offer: The Solicitation Will Only Be Available Electronically. The Solicitation (rfp) Will Be Available On Or About 10/03/2024. The Solicitation Can Only Be Obtained By Accessing Sam.gov A Secure Website Designed To Safeguard Sensitive But Unclassified (sbu) Acquisition Material. Potential Offerors Will Be Responsible For Downloading The Solicitation And For Monitoring The Website For Possible Amendments And/or Additional Information. Potential Offerors Must Be Registered In Sam.gov. Inquiries Concerning The Project Should Be Directed To The Following Email Address: Michele.valenza@gsa.gov And Paul.murphy@gsa.gov And Reference The Solicitation Number In The Subject Line.

Description: Competition announcement – general guidelines, competition restricted procedure (services) Competition for the extension of the Wiesbaden Museum Architectural competition for the extension of the Wiesbaden State Museum Competition for the extension of the Wiesbaden Museum The Wiesbaden Museum is located in the Hessian state capital Wiesbaden and is one of the five Hessian state museums. The museum combines art and nature and spans the spectrum from natural history objects to the present day. On an exhibition area of 7,400 square meters, the State Museum brings together the art collections, including exhibits from the Old Masters, Classical Modernism, Modernism and Contemporary Art, and the permanent exhibition of the Natural History Collections. Against the background of a growing need for space, particularly for exhibition and storage space, and existing functional incongruities in museum operations, an extension to the State Museum is being planned. The area required for the extension was set at around 3,000 square metres Nuf 1-6. Given the special location, the necessary sensitive integration into the listed building stock and the compact building area available, intensive investigations and coordination of possible development options were carried out in advance with the parties involved. Taking all of the findings into account, the design task focuses on a building site in the south courtyard of the existing building. The new extension is to be built at this location as an independent extension to the existing museum building and will fit into the surrounding area, taking into account monument protection and urban planning restrictions. The concept requires a well thought-out vertical and horizontal distribution of uses, precise connections and networking with the existing building and a clever organisation of the areas. The promoter is planning to hold a planning competition to find the best design and technical-conceptual solutions for this demanding task. The competition is a restricted, single-phase competition in accordance with RPW 2013 in the version published by the Federal Ministry of Transport, Building and Urban Development on January 31, 2013 with the announcement of February 22, 2013 and the changes and information announced by the Hmdf decree of December 20, 2018. The results of the implementation competition will be incorporated into the subsequent negotiation procedure in accordance with the additional information under "purpose". The award of the following services is to take place as part of a negotiated procedure without a participation competition in accordance with Section 14 Paragraph 4 No. 8 VGV after the implementation competition: As part of the VGV procedure, the services for the building object planning (lph 1 (pro rata) - 9 Section 34 Hoai 2021) are to be awarded. The contract is awarded in stages in accordance with the Rbbau contract template and subject to the budgetary approval of the State of Hesse and provided that there is no important reason to prevent the award. The Committee for Procurement and Competition of the Chamber of Architects and Urban Planners of Hesse was involved in the preparation and announcement of the competition in an advisory capacity. The announcement of the competition will be registered there. At the time of publication, the registration number was not yet available.

Details: Description Invitation To Bid No. Project No. Office Project Name Amount Source Of Fund Delivery Period 4. Cad-25-services-0173 City Architect Department Line 1: Conduct Of Geotechnical Investigation For The Proposed Construction Of Three (3) Storey Multi-purpose Building (offices) At Villa Verde Subdivision At Barangay Sta. Monica For The Year 2025 (early Procurement Activity) 100,000.00 General Fund 20 Cd Line 2: Conduct Of Geotechnical Investigation For The Proposed Construction Of Two (2) Storey Multi-purpose Building (parking And Basketball Court) At St. Dominic 9 Subdivision, Barangay Talipapa For The Year 2025 (early Procurement Activity) 100,000.00 General Fund 20 Cd Line 3: Conduct Of Geotechnical Investigation For The Proposed Construction Of Three (3) Storey Multi-purpose Building (parking, Basketball Court) At Pleasantville Subdivision, Barangay Talipapa For The Year 2025 (early Procurement Activity) 150,000.00 General Fund 20 Cd Line 4: Conduct Of Geotechnical Investigation For The Proposed Construction Of Two (2) Storey Multi-purpose Building (parking Area, Covered Basketball Court) At Barangay U.p. Village For The Year 2025 (early Procurement Activity) 150,000.00 General Fund 20 Cd Line 5: Conduct Of Geotechnical Investigation For The Proposed Expansion Of Animal Care And Adoption Center (pet Crematorium) For The Year 2025 (early Procurement Activity) 100,000.00 General Fund 20 Cd Line 6: Conduct Of Geotechnical Investigation For The Proposed Construction Of Three (3) Storey Fire Sub-station At Barangay Sta. Lucia For The Year 2025 (early Procurement Activity) 100,000.00 General Fund 20 Cd Line 7: Conduct Of Geotechnical Investigation For The Request For The Construction Of Volleyball And Badminton Court At Rolling Meadows Phase 1, Barangay San Bartolome For The Year 2025 (early Procurement Activity) 250,000.00 General Fund 20 Cd Line 8: Conduct Of Geotechnical Investigation For The Proposed Construction Of Three (3) Storey Multi-level Building With Parking, Hoa Office, Basketball Court And Evacuation Center At Angela Blas Subdivision, At Barangay San Bartolome For The Year 2025 (early Procurement Activity) 200,000.00 General Fund 20 Cd Line 9: Conduct Of Geotechnical Investigation For The Proposed Construction Of Five (5) Storey Record Center Building At Barangay Holy Spirit For The Year 2025 (early Procurement Activity) 250,000.00 General Fund 20 Cd Line 10: Conduct Of Geotechnical Investigation For The Proposed Master Development Plan For Novaliches District Hospital For The Year 2025 (early Procurement Activity) 400,000.00 General Fund 20 Cd 1. The Quezon City Local Government, Through The General Fund Of Various Years Intends To Apply The Sums Stated Above Being The Abc To Payments Under The Contract For The Above Stated Projects Of Contract For Each Lot/item. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Quezon City Local Government Now Invites Bids For Various Projects. Delivery Of The Goods Is Required As Stated Above. Bidders Should Have Completed, Within The Last Three (3) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From Quezon City Government Bids And Awards Committee (bac) Secretariat And Inspect The Bidding Documents At The Address Given Below During Weekdays From 7:00 A.m. – 5:00 P.m. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On Thursday, November 07, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. Standard Rates: Approved Budget For The Contract Maximum Cost Of Bidding Documents (in Philippine Peso) 500,000 And Below 500.00 More Than 500,000 Up To 1 Million 1,000.00 More Than 1 Million Up To 5 Million 5,000.00 More Than 5 Million Up To 10 Million 10,000.00 More Than 10 Million Up To 50 Million 25,000.00 More Than 50 Million Up To 500 Million 50,000.00 More Than 500 Million 75,000.00 The Following Are The Requirements For Purchase Of Bidding Documents; 1. Philgeps Registration Certificate (platinum – 3 Pages) 2. Document Request List (drl) 3. Authorization To Purchase Bidding Documents 3.1 Corporate Secretary Certificate For Corporation (specific For The Project) 3.2 Special Power Of Attorney For Single Proprietorship (specific For The Project) 4. Notarized Joint Venture Agreement (as Applicable) 6. The Quezon City Local Government Will Hold A Pre-bid Conference On 9:00 A.m. Of Thursday, November 14, 2024 At 2nd Floor, Procurement Department-bidding Room, Finance Building, Quezon City Hall Compound, And/or Through Video Conferencing Via Zoom Which Shall Be Open To Prospective Bidders. Topic: Bac-goods Pre-bid Conference Meeting Join Zoom Meeting Https://us02web.zoom.us/j/84835002246?pwd=ovruve0wexzmnxywzg5lawd1dxk1qt09 Meeting Id: 848 3500 2246 Passcode: 154733 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The 2nd Floor, Procurement Department, Finance Building, Quezon City Hall Compound On Or Before 10:00 A.m. Of Thursday, November 28, 2024. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 11:00 A.m. Of Thursday, November 28, 2024. At The Given Address Below And/or Via Zoom. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. Topic: Bac-goods & Services Bidding Join Zoom Meeting Https://us02web.zoom.us/j/85850855933?pwd=r2dzuup4z3lyu29izgv1wmdkrjzcdz09 Meeting Id: 858 5085 5933 Passcode: 118682 10. The Quezon City Local Government Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders 11. For Further Information, Please Refer To: Atty. Dominic B. Garcia Oic, Procurement Department 2nd Floor, Procurement Department, Finance Building, Quezon City Hall Compound Elliptical Road, Barangay Central Diliman, Quezon City. Email Add: Bacgoods.procurement@quezoncity.gov.ph Tel. No. (02)8988-4242 Loc. 8506/8710 Website: Www.quezoncity.gov.ph 12. You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.quezoncity.gov.ph By: Ms. Ma. Margarita S. Mejia, Dpa Chairperson, Qc-bac-goods And Services

Details: Title: Architektonische Und Freiraumplanerische Gestaltung Der U5-haltestelle Stephansplatz (bim-projekt) description: Mit Der U5 Plant Die Hochbahn Eine Neue U-bahn-linie, Die Als Verkehrsader Quer Durch Die Stadt Verläuft. Die Neubaustrecke Der Zukünftigen U5 Beginnt Im Stadtteil Bramfeld, Verläuft Östlich Der Alster Über Die Innenstadt Und Dann Westlich Der Alster Über Das Uke Bis Zu Den Arenen Im Stadtteil Bahrenfeld. Im Abschnitt U5 Ost (bramfeld - City Nord) Sind Auf Einer Strecke Von Rund 5,8 Kilometern Insgesamt Vier Neubauhaltestellen Geplant. Der Abschnitt Der U5 Mitte Schließt An Die Haltestelle City Nord An Und Führt Über Die Innenstadt Bis Zu Den Arenen. Auf Einer Strecke Von Ca. 19,1 Kilometern Länge Sind Hier Mit Stand Vorplanung Insgesamt 18 Haltestellen Geplant. Die Haltestelle Stephansplatz Liegt Im Zentrum Der Stadt Hamburg Und Im Mittleren Abschnitt Der Linie U5. Das Neue Haltestellenbauwerk Der U5 Wird Südöstlich Des Bahnhofes Dammtor In Einem Städtebaulich/ Landschaftsplanerisch Und Denkmalfachlich Hochbedeutenden Kontext Im Bereich Des Dag-hammarskjöld-platzes, Der Parkanlage Planten Un Blomen Und Der Straße Dammtordamm Liegen Und In Nord-süd-richtung Orientiert Sein. Es Erschließt Unter Anderem Den Bereich Um Den Bahnhof Dammtor. Neben Dem Übergang Zur U-bahn-linie U1 Ist Der Bahnhof Dammtor Mit S-bahn, Regional- Und Fernverkehrsverbindungen Über Ausgangsanlagen An Der Oberfläche Zu Erreichen. Zum Zeitpunkt Dieser Bekanntmachung Stehen Zwei Verschiedene Varianten Hinsichtlich Der Konkreten Räumlichen Ausgestaltung Der Neuen Haltestelle Im Raum. Im Wesentlichen Unterscheiden Sich Die Varianten Hinsichtlich Des Baulichen Umfangs Und Den Geschätzten Baukosten. Eine Abschließende Entscheidung Darüber, Welche Variante Letztendlich Umgesetzt Wird Und Damit Auch Den Auftrag Des Angestrebten Wettbewerbsverfahrens Darstellt, Wird Für Anfang 2025 Erwartet Und Im Rahmen Des Versands Der Auslobungsunterlagen Den Ausgewählten Planungsteams Mitgeteilt. Gegenstand Des Vorliegenden Wettbewerbsverfahrens Ist Die Planung Des Gesamten Raumbildenden Ausbaus Für Die Geplante U-bahn-haltestelle Stephansplatz Auf Grundlage Des Vorentwurfs Sowie Der Freiraumplanerische Entwurf Für Die Umliegenden/angrenzenden Freianlagen. Zu Der Planung Des Raumbildenden Ausbaus Zählen Die Gestaltung Der Öffentlichen Bereiche Der Bahnsteigebene, Der Schalterhallenebenen, Sowie Der Treppenaufgänge Und Aufzüge Mit Allen Verbindungswegen Zu Den Ausgangsanlagen. Hierbei Ist Ggf. Auch Der Erhalt Des Ausgangsbauwerks Von Karl Schneider Aus Den 1920er Jahren Zu Berücksichtigen, Ein Wichtiges Beispiel Des Neuen Bauens In Hamburg. Derzeit Befindet Sich Noch In Abstimmung, Ob Weitere Angrenzende Straßenräume In Die Planung Mit Einbezogen Werden Sollen. Bei Der Bearbeitung Der Aufgabe Sind Bestimmte Vorgegebene Rahmenbedingungen Zu Beachten. Dazu Zählt Z. B. Der Automatisierte Betrieb Der U5 Mit Bahnsteigtüren (platform Screen Doors) An Den Bahnsteigen. Die Ausloberin Und Die Freie Und Hansestadt Hamburg Erwarten Eine Lösung, Die Ein Hohes Maß An Sicherheit, Nutzerfreundlichkeit Und Komfort Und Eine Hohe Gestaltungsqualität Mit Hoher Wirtschaftlichkeit Und Dem Bei Öffentlichen Bauvorhaben Gebotenen Verantwortungsvollen Umgang Mit Finanzmitteln Verbindet. Die Hochbahn Hat In Zusammenarbeit Mit Hadi Teherani Architects, Hamburg, Und In Enger Abstimmung Mit Der Freien Und Hansestadt Hamburg Grundlegende Gestaltungs- Und Konstruktionsprinzipien Für Die Raumbildenden Ausbauten Aller Stationen Der U5 Erarbeitet Und In Einem Zweiteiligen Gestaltungshandbuch Zusammengefasst. Diese Prinzipien Bilden Den Gestalterischen Rahmen Für Die Neubauhaltestellen Der U5 Und Sollen Von Den Planern In Konkrete Entwürfe Übersetzt Werden. Sie Bieten Den Planern Dabei Angemessene Freiheiten Und Spielräume Für Eigene Gestaltungsideen Und Interpretationen. Das Gestaltungshandbuch Für Die Neubauhaltestellen Der U5 Erfasst Die Beim Neubau Der Haltestelle Stephansplatz Zu Berücksichtigenden Speziellen Anforderungen Nur Teilweise. Die Planungsteams Können Sich Dennoch An Den Vorschlägen Des Gestaltungshandbuches Orientieren Und Prüfen, Inwieweit Bestimmte Vorschläge Entwurfsabhängig In Die Konzepte Eingebunden Werden Können.

Details: Title: Nieuwbouw Chemie Design And Build Ucll Campus Diepenbeek description: In 2014 Ontstond De Hogeschool Ucll Door De Fusie Van De Voormalige Katholieke Hogeschool Limburg (khlim), De Katholieke Hogeschool Leuven (khleuven) En Groep T (lerarenopleiding). Hogeschool Ucll (uc Limburg Vzw En Uc Leuven Vzw) Biedt 20 graduaten, 22 bacheloropleidingen En 9 Bachelor-na-bachelor Opleidingen Aan Op 8 Campussen In Limburg En Vlaams-brabant. Met 16.000 Studenten En 1.750 Medewerkers Is Ucll Één Van De Grootste Instellingen Voor Hoger Onderwijs In Vlaanderen. Ucll Is Actief In De Interessegebieden Lerarenopleiding, Management, Technologie, Gezondheid En Welzijn En Combineert Haar Onderwijsopdracht Met Praktijkgericht Onderzoek En Dienstverlening. De Hogeschool Zet Maximaal In Op Persoonlijke Begeleiding Van Haar Studenten. Haar Brede Onderwijsnetwerk Garandeert Een Plek Voor Ieders Talent En Haar Diploma’s Staan Sterk Op De Arbeidsmarkt. Mensen En Ideeën In Beweging Brengen Door Ruimte Te Geven Aan Innovatief Denken En Samenwerken, Dat Is De Visie Van De Hogeschool, Dat Is moving Minds. De Naam Toont De Internationale Ambitie: Ucll, Voluit university Colleges leuven-limburg, Wil Solide Opleidingen Aanbieden, Georiënteerd Op Kwaliteit En Met De Blik Naar Buiten Gericht, Op De Euregio En Verder. Ucll Behoort Tot De Associatie Ku Leuven En Is Partner In De E³udres² Alliantie. Algemeen Ucll En Ku Leuven Werken Samen Aan Een Nieuwbouw Chemie Waarin Onderwijs- En Onderzoeksfaciliteiten Ondergebracht Worden Op De Campus In Diepenbeek ,. Dankzij De Samenwerking Tussen Beide Onderwijsinstanties Kunnen Logistieke Functies (bv. Chemische Opslag En Afval) En Zeer Specifieke Laboinrichtingen Gedeeld Worden. Op Het Betreffende Perceel Kan Mogelijks Een Bouwvolume Gerealiseerd Worden Dat Het Huidige Eisenprogramma Van Circa 6000m²b Overschrijdt. Momenteel Wordt Onderzocht Of Hetzij Een Fasering Mogelijk Is, Hetzij De Resterende Vierkante Meters In Casco Zullen Worden Gebouwd. Dit Haalbaarheidsonderzoek Wordt Uitgevoerd Door Proof Of The Sum – Svr-architects – Exilab En Zal In De Tweede Stap Van De Procedure Ter Beschikking Gesteld Worden Aan De Geselecteerde Kandidaten. Voor De Campus Werd Door Pom Limburg Een Beeldkwaliteitsplan En Masterplan Opgesteld. Voor Dit Project Zal Door Ucll Een Subsidieaanvraag Ingediend Worden Bij Efro-vlaanderen. Gelet Op Het Feit Dat Deze Subsidie Nog Niet Verworven Is, Zal Het Project Opgedeeld Worden In Een Vast Gedeelte (minimum Programma, Grootteorde 4250m²b) En Een Voorwaardelijk Deel (bijkomend Programma Grootteorde 2000m²b). Bij Toewijzing Van Eventuele Subsidies Wordt Er Een Projectplanning Van 36 Maanden Als Strikte Voorwaarde Opgelegd. Design And Build De Voorliggende Opdracht Betreft Een Design And Build Opdracht Waarbij Zowel De Globale Ontwerpopdracht Architectuur-stabiliteit-installatietechnieken-buiteninfrastructuur, Alsook De Eigenlijke Realisatie Tot En Met De Definitieve Oplevering Aan Één Opdrachtnemer Wordt Toegewezen. Gelet Op Het Complexe Gegeven Om Een Chemisch Laboratorium In Een Design&build-context Te Realiseren Met Een Korte Doorlooptermijn, Wil Het Bestuur Zich Verzekeren Van Een Competent En Op Elkaar Ingespeeld Basisprojectteam Dat Doorheen Het Hele Project Identiek Blijft. Voor Het Bestuur Gaat Het Hier Over De Algemene Aannemer (categorie D Klasse 8, Nodig Geacht Voor Dit Project), De Aannemer Hvac, Het Architectenbureau En Het Studiebureau Installatietechnieken. Voor Deze Kandidaatstelling Wordt Dus Gevraagd Naar Een Bindende (zie Verder) Opgave Van De Voorgaande 4 Basisprojectteamleden, Onder Welke Samenwerkingsvorm Dan Ook (combinatie Van Twee Of Meerdere Van De Basisprojectteamleden, Waarbij De Voorkeur Van Het Bestuur Minimaal Uitgaat Naar Een Combinatie Van De Algemeen Aannemer En De Aannemer Hvac; Onderaanneming Waarbij Men In Voorkomend Geval Beroep Doet Op De Draagkracht; Mengvorm Van De Twee Voorgaande Opties, ..). Alle Andere Aanvullende Projectteamleden (ingenieur Stabiliteit, Veiligheidscoördinator, Ebp,…) Kunnen In Een Later Stadium Betrokken Worden En Dienen Dus Niet In Deze Kandidaatstelling Opgenomen Te Worden. Het Voorgestelde Basisprojectteam Kan, Eens Het Is Geselecteerd En Wordt Uitgenodigd Om Een Offerte In Te Dienen, Niet Meer Gewijzigd Worden, Noch Tijdens De Eigenlijke Onderhandelingsprocedure, Noch Tijdens De Uitvoering Van De Opdracht. Vervanging Van Leden Van Het Basisprojectteam Die In Het Samenwerkingsverband Worden Opgenomen Als Onderaannemer, Is Enkel Mogelijk In Geval Van Een Uitsluitingsgrond, Bij Overmacht Of Faillissement, Dan Wel Op Uitdrukkelijk Gemotiveerd Verzoek Van Het Bestuur. Vervanging Van Een Partij Vereist Altijd De Uitdrukkelijke Goedkeuring Van Het Bestuur. Planning Momenteel Wordt Volgende Planning Gehanteerd: • Fase 1: Indienen Aanvraag Tot Deelname: Eind November 2024 • Fase 2: Onderhandelingsprocedure : Februari – September 2025 • Indienen Omgevingsvergunning: Eind 2025 • Start Realisatie: Voorjaar 2026 In Het Bestek Van De Onderhandelingsprocedure Zal Deze Planning Verder Verfijnd Worden.

Details: Description Republic Of The Philippines Province Of Quezon Municipality Of Polillo ***** Request For Expression Of Interest For Consulting Services For The Formulation Of The Local Climate Change Action Plan (lccap), And Climate & Disaster Risk Assessment (cdra) For The Municipality Of Polillo, Province Of Quezon 1. The Municipality Of Polillo, Through The 5% Ldrrm Fund 2023 (continuing) As Approved By The Sangguniang Bayan Intends To Apply The Sum Of One Million Seven Hundred Thousand Pesos Only (p 1,700,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For Consulting Services For The Formulation Of Local Climate Change Action Plan (lccap), And Climate & Disaster Risk Assessment (cdra) For The Municipality Of Polillo, Province Of Quezon. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At The Opening Of The Financial Proposals. 2. The Municipality Of Polillo Now Calls For The Submission Of Eligibility Documents For Consulting Services For The Formulation Of Local Climate Change Action Plan (lccap), And Climate & Disaster Risk Assessment (cdra) For The Municipality Of Polillo, Province Of Quezon. Eligibility Documents Of Interested Consultants Must Be Duly Received By The Bac Secretariat On Or Before December 2, 2024, 2:30pm At Mpdc Offfice, 2nd Floor Municipal Building-annex, Mabini St., Brgy. Poblacion, Polillo, Quezon. Applications For Eligibility Will Be Evaluated Based On A Non-discretionary “pass/fail” Criterion. 3. Interested Bidders May Obtain Further Information From Municipality Of Polillo And Inspect The Bidding Documents At The Address Given Below During Monday To Friday, 8:00 Am To 5:00pm. 4. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 20, 2024 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only (p 5,000.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Will Be Presented In Person, By Facsimile, Or Through Electronic Means. 5. The Bac Shall Draw Up The Short List Of Consultants From Those Who Have Submitted Expression Of Interest, Including The Eligibility Documents, And Have Been Determined As Eligible In Accordance With The Provisions Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act,” And Its Implementing Rules And Regulations (irr). The Shortlist Shall Consist Of At Least Three (3) Prospective Bidders Who Will Be Entitled To Submit Bids. The Criteria And Rating System For Short Listing Are: Eligibility Criteria And Rating System For Shortlisting: Table 1. Shortlisting Of Consultant And Rating Required Documents For Submission In Matrix Form* Criteria Rating Factors And Passing Rate Criteria Weight (%) Criteria Rating Score Sec Registration For Joint Venture, The Submitted Document Of The Partner Related To Risk Shall Be Used For Rating Purposes Years In Business 4 Pts. – More Than 6 Years 3 Pts. – More Than 5 Years To 6 Years 2 Pts. – More Than 4 Years To 5 Years 1 Pt. – 3 Years To 4 Years Note: Not Eligible If Less Than 3 Years. Rating/year In Business Shall Be Based On The Copy Of The Sec Registration/document Submitted. For Sec Registration Documents, It Shall Disclose The Specific Address Of Its Resident Agent And The Specific Location Where The Corporation Shall Hold Office And Place In The Philippines Where The Corporation Intends To Operate. For Other Legal Documents If Executed Abroad, The Document Must Be Authenticated By The Nearest Philippine Consulate Office (20%) Copy Of The Oldest Contract Relative To Services On Similar Projects Years In Business In Providing Services On Similar Projects 4 Pts. – More Than 6 Years 3 Pts. – More Than 5 Years To 6 Years 2 Pts. – More Than 4 Years To 5 Years 1 Pt. – 3 Years To 4 Years Note: Not Eligible If Less Than 3 Years. Rating/year In Business Shall Be Based On The Copy Of Oldest Contract Relative To Similar Projects (25%) Statement Of Completed Contracts On Similar Projects In The Last Five Years Completed Engagement Contracts/projects With Consultancy On Similar Projects 4 Pts. – 4 Or More Completed Similar Contracts 3 Pts. – 3 Completed Similar Projects 2 Pts. – 2 Completed Similar Projects 1 Pt. – 1 Completed Similar Projects Note: Not Eligible If Required Documents Are Not Attached/submitted. The Statement Of Completed Contracts Should Contain The Following: ⮚ Name And Location Of The Contract/project ⮚ Date Of The Contract ⮚ Type Of Consulting Service ⮚ Contract Duration (35%) Submitted Slcc. The Following Must Be Submitted As Basis For The Rating: A. Copy Of Certificate Of Performance Evaluation Showing A Rating Of At Least Satisfactory Issued By Bidder’s Client For Above Contracts B. Copy Of Contract Showing The Terms And Conditions And Scope Of Works C. Copy Of End User’s Acceptance Or Copy Of Official Receipt Contract Value Of The Single Largest Completed Contract (slcc) On Similar Projects 4 Pts. – P6.1m And Above 3 Pts. – P5.1m To P6.0m 2 Pts. – P4.0 M To P5.0m 1 Pt. – P3.0m To P4.0 M Note: Not Eligible If: A. Value Of The Submitted Slc Is Less Than 50% Of The Abc; B. Contract Is Not Similar In Nature; And C. None Attachment/submission Of Required Attachments/documents (20%) Criteria Minimum Passing Rate: 75% 100% Note: 1. Bidding Is Open To All Interested Bidders, Whether Local Or Foreign, Subject To The Conditions For Eligibility Provided In The Irr Of Ra 9184. 2. In Case Of A Joint Venture (jv) Which Is Unincorporated, The Legal Eligibility Documents Shall Be Submitted By Each Of The Jv Partners, While Submission Of The Technical And Financial Eligibility Documents By Any Of The Jv Partners Constitutes Collective Compliance. Otherwise, If Jv Is Incorporated Or Registered With The Relevant Government Agency, All Documents Must Be Under The Jv’s Name. Only The Top Three (3) Highest Rating Bidders/consultants Shall Be Declared As Shortlisted, Provided, The Bidder/consultant Has Garnered At Least A Total Average Rating Of 1.0 3. Eligibility Scoring For Shortlisting Is Illustrated As Follows: Criteria 1 2 3 4 Weight 20% 25% 35% 20% Points 3.2 4 5.6 3.2 Rating = Weight X Points 1.0 1.0 1.0 1.0 Total Rating 4.0 Requirements From Consulting Firm Staff/personnel  The Consulting Firm Staff/personnel Must Be A Combination Of Licensed, Environmental Planner/s, Licensed Architect/s Or Civil Engineer/s, Geographical Information System (gis), Specialist, Economist Or Development Specialists, A Cdra Specialist, With Hands-on Experience On Urban And Master Planning.  The Consultants Must Demonstrate A High Level Of Technical Proficiency, Recognized Through Their National Experience In Local Projects , And Substantiated By Relevant Educational Backgrounds And Specialized Trainings In Environmental Planning.  A Preference Will Be Given To Those Who Can Demonstrate A Minimum Of Five (5) Years Of Experience And A Proven Track Record In Spearheading Projects Akin To Local Development Plans Such As Comprehensive Development Plan (cdp), Comprehensive Land Use Plan (clup), Local Climate Change Action Plan (lccap) And Climate Disaster Risk Assessment (cdra).  The Consulting Firm Must Have A Proven Track Record In Conducting And Formulating Local Climate Change Action Plan, And Climate And Disaster Risk Assessments.  The Consulting Firm Must Possess Skills In The Use Application Of Gis Technology On Maps And Maps Overlaying. Commitments And Projects Outputs To Be Sought From Consultants:  The Consulting Firm Or Service Provider Shall Continue Its Services Until The Department Of Interior And Local Government (dilg), Department Of Housing And Settlements And Urban Development (dhsud) And Climate Change Commission (ccc) Had Approved The Local Climate Change Action Plan (lccap) And Climate And Disaster Risk Assessment (cdra) Report.  The Consulting Firm Or Service Provider Shall Conduct The Services According To Department Of Housing Settlements And Urban Development (dhsud), Department Of Interior Local Government (dilg) And Climate Change Commission Guidelines Along With The Work Plan.  The Consulting Firm Or Service Provider Shall Conduct The Services According To The National Drrm Plan And Framework Guidelines Along With The Work Plan.  The Consulting Firm Or Service Provider Shall Submit The Agreed Deliverables/outputs Within The Agreed Timeframe.  The Consulting Firm Or Service Provider Shall Integrate The Lgu’s And People’s Aspirations Through Workshops, Interviews, And Field Surveys.  The Consulting Firm Or Service Provider Shall Conduct The Service Ethically With The Highest Standards Of Professional Competence.  The Consulting Firm Or Service Provider Shall Revise And Do The Presentation With The Technical Aid Of The Lgu. Commitment Of End-user:  The End-user Shall Pay The Fee In A Timely Manner, Upon The Completion Of The Consultant’s Required Documentary Requirements To Avoid Delays.  The End-user Shall Give Support In The Data Collection.  The End-user Shall Organize The Venue And Coordinate The Attendance Of Workshop Participants.  The End-user Shall Shoulder The Transportation Of The Workshop Participants, If Necessary.  The End-user Shall Provide Assistance To The Consultant (coordination, Authorization, And Guide Personnel). Activities Expected Outputs Percentage Field Survey And Data Gathering Inception Report 20% Data Collection Progress Report After The Second Workshop 20% Climate-related Hazards Vulnerability Analysis Completion Of All Workshops 20% Data Review And Validation Lccap And Cdra Workshops Crafting Of The Lccap And Cdra Report Draft Lccap Report 20% Draft Ldrrmp Report Draft Cdra Report Presentation Of The Draft Lccap And Cdra Reports To Lgu Revision Of The Draft Lccap And Cdra Reports Revised Draft Of Lccap And Cdra Reports Submission Of The Lccap Report To Dilg For Review Revision Of The Lccap And Cdra Report On The Comments From Dilg Revised Draft Of Lccap And Cdra Reports Based On The Comments From Dilg Submission Of The Final Lccap And Cdra Reports Final Local Climate Change Action Plan (lccap), And Climate And Disaster Risk Assessment (cdra) Report Approved By The Department Of Interior And Local Government (dilg), Department Of Housing And Settlements And Urban Development (dhsud), Approved By Sangguniang Bayan 20% Approved Lccap And Cdra 100% Package Includes 1. Excellent Visual Design And Lay-out. 2. Gis Files Provided With Software Installation And Basic Training. 3. Updated Local Climate Change Action Plan (lccap) And Climate And Disaster Risk Assessment (cdra) Report And E-copy. Progress Billings: Deliverable Service Payment Allocation Inception Report 20% Progress Report After The Second Workshop 20% Upon Completion Of All Workshops 20% Submission Of Draft Lccap And Cdra Report 20% Final Local Climate Change Action Plan (lccap), And Climate And Disaster Risk Assessment (cdra) Approved By The Department Of Interior And Local Government (dilg), Department Of Housing And Settlements And Urban Development (dhsud), And Approved By The Sangguniang Bayan 20% General Conditions: 1. Delivery/rendering Services Shall Be Made With The Period Indicated Above; Otherwise A Penalty Of 1/10 Of 1% Of The Total Amount Shall Be Subject For Each Day Of Delay. 2. Services Delivered Shall Be Subject To Inspection Upon Completion. 3. All Works Not Complying With The Description Indicated In This Job Order Shall Be Returned And Shall Be Replaced By Supplier; Otherwise The Amount Of The Said Rejected Works Shall Be Deducted From The Total Price. 4. The Supplier Shall Be Responsible For The Damaged Goods Due To Careless Packing/handling. 5. The Supplier Shall Return The Original Copy Of The Job Order And Submit Invoice And Delivery Receipt Indicating The Job Order Number. 6. The Municipality Shall Not Be Responsible For Services Rendered Without A Duly Signed And Approved Job Order. 7. In Case Of Any Violation Of The Above Conditions, The Municipality Shall Take The Necessary Action To Protect Its Interest. 6. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The Irr Of Ra 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Cooperatives, And Partnerships Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 7. The Procuring Entity Shall Evaluate Bids Using The Quality-cost Evaluation/selection (qcbe/qcbs) Procedure. Procuring Entity Shall Indicate The Weights To Be Allocated For The Technical And Financial Proposals. The Criteria And Rating System For The Evaluation Of Bids Shall Be Provided In The Instructions To Bidders. 9. The Contract Shall Be Completed Within 240 Days Or 8 Months. However, It May Be Extended For A Reasonable Period In Case The Project Completion Is Delayed Due To Fortuitous Events, Without Incurring Additional Cost Or Changes To The Lgu. 10. The Municipality Of Polillo Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Implementing Rules And Regulations (irr) Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Of Bidders. 11. For Further Information, Please Refer; Deborah B. Marasigan Bac Secretariat Mabini St. Brgy. Poblacion, Polillo, Quezon, 4339 Bac.polillo@gmail.com Deborah B. Marasigan Bac Chairperson Publication: November 20, 2024 (philgeps & In Conspicuous Places In This Municipality)

Details: This Synopsis Is A Pre-solicitation Notice From The U.s. Department Of Commerce, National Oceanic And Atmospheric Administration (noaa), Corporate Services Acquisition Division (csad), Facilities Support Branch notice Id: 1305m4-24-r-0071 this Is A Pre-solicitation Notice Only. project Title: Manchester Campus Addition Construction At The Manchester Research Station In Port Orchard, Washington location: Noaa Nw Fisheries Research Station 7305 E. Beach Drive Port Orchard, Wa 98366 classification And General Information: this Requirement Will Be Issued As A Full And Open Competition the North American Industry Classification System (naics) Code Associated With This Procurement Is 236220, Commercial And Institutional Building Construction. The Small Business Administration Standard Of $45 Million Dollars In Annual Receipts Averaged Over A Business’s Latest Three (3) Complete Fiscal Years Or (except In The Business Loan And Disaster Loan Programs) Five (5) Complete Fiscal Years To Determine The Average Annual Receipts. If A Business Hasn’t Been In Business For Five (5) Years, Multiply Its Average Weekly Revenue By 52 To Determine Its Average Annual Receipts. this Contract Will Be Full And Open, And The Contractor Shall Be Selected By Federal Acquisition Regulation (far) Part 15.1 Source Selection Procedures. This Procurement Will Be Competitive, Utilizing The Tradeoff Process Approach Under The Best Value Continuum (far 15.101). This Process Permits Tradeoffs Among Cost Or Price And Technical Factors. It Allows The Government To Accept Other Than The Lowest Priced Offeror Or Different Than The Highest Technically Rated Offeror. All Evaluation Factors Other Than Cost Or Price, When Combined, Are Significantly More Important Than Cost Or Price. The Best Value Method Is Essential To Evaluate And Compare Costs And Prices To Select The Most Advantageous Offer. The Planned Project Delivery Method Will Result In A Firm- Fixed-price Contract For Construction Services. background Overview: the National Oceanic And Atmospheric Administration (noaa) Has A Requirement For A Campus Addition Construction Project For The Northwest Fisheries Science Center (nwfsc) At The Manchester Research Station (mrs), 7305 Beach Drive East, Manchester, Wa 98353. This Project Constitutes A Ground Up, New Construction Project Of Approximately 24,000 Gsf To Be Located On The Existing Mrs Campus West Of Seattle, Washington, North Of The Town Of Manchester. the National Marine Fisheries Service (nmfs) Northwest Fisheries Science Center Mission Supports The Conservation And Management Of Living Marine Resources And Their Habitats In The Northeast Pacific Ocean. Nmfs Research Assists Resource Managers In Making Sound Decisions That Build Sustainable Fisheries, Recover Endangered And Threatened Species, Sustain Healthy Ecosystems, And Expand Domestic Seafood Production Through Sustainable Marine Aquaculture. For The Northwest Region, These Functions Are Dispersed Across Multiple Facilities. This Project Will Consolidate All Functions Requiring Access To Seawater At The Manchester Research Station (mrs). project Description - Construction: Generally Described As Follows But Not Limited To: a New, Energy Efficient Facility That Will Include Modern Laboratory Facilities For Data Collection And Research That Focuses On Understanding The Life Cycle Of Marine Species And The Impacts Of Ecosystem Stressors On Anadromous And Marine Fish And Invertebrates. 2. The Facility Will Include But Is Not Limited To The Following Program Areas And Facilities: A. Recirculating Aquatic System (fresh And Saltwater) B. Wet Labs C. Dry Labs D. Facility Storage E. Gas Generation F. Freezer Storage G. Office Spaces H. Hatcheries (specialized Flow Through Aquatic Systems For Ocean Acidification And Toxicology Research, And Recirculation Aquaculture Systems) I. Electrical, Mechanical And Communication Spaces J. Site Work Including Utilities, Sidewalks, Parking, Roadways, And Landscaping the Project Proposes To Relocate The Necessary Research Functions That Currently Reside At The Montlake Facility And Functions That Were Formerly Performed At The Now Decommissioned Mukilteo Facility To The Manchester Research Station. The Major Functions Requiring Relocation Include: conservation Biology Division Ocean Acidification Program & Environmental And Fisheries Sciences Division (efs) Ecotoxicology And Fish Feeds And Nutrition Programs Specialized Aquatic Facilities For Research Using Live Animals, Offices, And Analytical Laboratories. manchester New Recirculating Aquaculture System (ras) the Proposed Contract Will Consist Of Contract Line Item Number (clin) 0001 For The Building Construction (offices And Laboratories), Option Clin 0002 For The Procurement And Installation Of Furniture And Option Clin 0003 For The Recirculating Aquatic System (ras) Component. this Is A New Requirement For Construction Services For The Manchester Campus Addition. The Solicitation And Resulting Contract Will Provide The 100% Design Drawings And Specifications For The Manchester Campus Addition Construction Project In Section J. site Visit Information: offerors Will Have The Opportunity To Visit The Site Before Submission Of Their Technical And Price Proposals. The Site Visit Details, To Be Held At The Manchester Research Station (mrs) Facility, Will Be Outlined In The Solicitation Package. Currently The Site Visit Is Projected To Be Held On Or About February 21, 2025. If Applicable, All Required Site Access Information As Outlined In Section J. Must Be Submitted In Accordance With The Solicitation Requirements For Site Visit Entry. project Period Of Performance And Magnitude: this Project Shall Be Performed By An Experienced General Construction Contractor That Has Performed Similar Work. The Estimated Performance Period Is 700 Calendar Days, Including Base + Optional Clins From Issuance Of Notice To Proceed. The Magnitude Of Construction For This Project Is Between $25.0m And $35.0m. system For Award Management (sam): all Contractors Interested In This Project And Doing Business With The Federal Government Must Be Registered With The System For Award Management (sam): Https://www.sam.gov issuance Of Solicitation With Requirements Information: noaa Anticipates Publishing The Solicitation And Supporting Documents Package On Or About Tuesday, February 4, 2025, With The Offer/receipt Date/time: Friday, April 4, 2025, 12:00 Pm Eastern Time (et) For Phase I And Tuesday, June 17, 2025, 12:00 Pm Et For Phase Ii. The Solicitation Will Be Available Electronically At The S.a.m. Website: Www.sam.gov. No Paper Copies, Faxes, Or Emails Will Be Available. Please Register As An Interested Source To Be Notified Of Amendments, Clarifications, Or Other Changes. Entities (even Those Registered As A Source) Are Responsible For Checking The Sam.gov Website Frequently To Ensure They Have All Available Information. in The Interim The Government Has Elected To Provide A Draft Copy Of The Complete Solicitation On Or About December 10, 2024 (we Anticipate Draft 100% Design And Specifications Only May Be Uploaded As Early As October 3, 2024). Once Uploaded, We Encourage Interested Parties To Review These Draft Documents. We Again Want To Emphasize That These Documents Are In “draft” Form And Are Subject To Change Upon Final Solicitation Issuance. Please Note, Referenced Attachments Are Included With This Release. Any Questions Regarding Gaining Access To The Materials Shall Be Directed To Mr. Scott Gebhardt At Scott.gebhardt@noaa.gov And Ms. Ronette C. Mcbean-felder At Ronette.mcbean-felder@noaa.gov. as A Reminder, This Draft Release Is Not A Solicitation For Government Services. Noaa Does Not Anticipate Posting Questions And Responses Or Amendments To This Draft As Would Occur With A Formal Rfp. No Awards Will Be Made From This Draft Release And Any Voluntary Informational Responses Submitted May Be Accomplished Via The Campus Addition Draft Solicitation Information Link. Keeping In Mind, Direct Responses To Informational Queries Or Clarifications May Not Be Made, But At The Government’s Discretion May Be Included In The Resulting Final Solicitation. Respondents Are Advised That The Government Will Not Pay For Any Information Or Administrative Costs Incurred In Response To This Draft Solicitation; All Costs Associated With Responding To This Draft Solicitation Will Be Solely At The Respondent’s Expense. prospective Contractors Must Limit The Dissemination Of This Information To Authorized Users Only. Dissemination Of Information Shall Only Be Made Upon Determining That The Recipient Is Authorized To Receive It. The Criterion For Deciding Authorization Is Need-to-know. Those Who Need To Know Are Those Who Are Specifically Granted Access For The Conduct Of Business On Behalf Of Or With Noaa. This Authority Includes All Persons Or Firms Necessary To Do Work At The Request Of The Government, Such As Architects And Engineers, Consultants, Contractors, Subcontractors, Suppliers, And Others That The Prospective Contractor Deems Necessary To Submit An Offer/bid Or To Complete The Work Or Contract, As Well As Maintenance And Repair Contractors And Equipment Service Contractors.

Details: This Pre-solicitation Notice Is Not A Request For Proposal. All Information Needed To Submit Sf330 Documents Are Contained Herein. No Additional Solicitation Package Or Technical Information Will Be Issued. project: 557-25-104 (rodi) Reverse Osmosis Deionized Water System work Location: Carl Vinson Va Medical Center, Dublin, Ga 31021 estimated/target Completion Period: 120 Calendar Days After Award. construction Magnitude: Between $100,000 And $250,000. naics: 541330â - Engineering Services small Business Standard: $25.5 Million set-aside: 100% Service-disabled Veteran-owned Small Business (sdvosb) site Visits Will Not Be Arranged During This Phase. the Anticipated Award Date Of The Proposed A-e Contract Is On Or Before September 30, 2025. sf 330 Date Of Receipt/due Date: Interested Firms Having The Capabilities To Perform This Work Must Submit One (1) Electronic Sf 330 And Attachments (if Any) No Later Than (nlt) 12:00 Pm (est) November 25, 2024. project Overview: the Purpose Of This Design Project Is To Provide A Design For A Water Purification System In The Sterile Processing Department (spd) At The Carl Vinson Va Medical Center (cvvmac) In Dublin, Ga. The Water Purification System Must Include The Following Systems: Water Softening, Carbon Filtration, Reverse Osmosis Deionization (rodi), And Storage/distribution. A Continuous Circulation Loop Must Be Designed To Deliver Critical Water To All User Endpoints And To Prevent Temporary Dead Legs. Continuous Monitoring Must Also Be Incorporated To Provide Critical Water Readings At The Point Of Use (pou). The Design Shall Also Include The Replacement Of Acoustical Ceiling Tiles With A Seamless Alternative On The Spd Wing. Any Necessary Electrical, Plumbing, Structural, Architecture, And Mechanical Requirements Shall Be Included In The Scope Of This Design Project. sdvosb Set-aside: this Requirement Is A 100% Set-aside For Service-disabled Veteran-owned Small Businesses Under The Authority Of 38 U.s.c. 8127(d). To Be Eligible For Award The Sdvosb You Must Be Considered Small Under The Relevant Naics Code. Sdvosb Contractors Must Be Verified And Viewable In Sba Vetcert: Https://veterans.certify.sba.gov/ Prior To Submission Of Proposal And Prior To Award Of Contract With Vaar 804.1103-70. Status As A Qualified Sdvosb Concern Is Under The Authority Of 38 Cfr Part 74 In Accordance With The Va Acquisition Regulation (vaar) Part 819. Any Person, Persons, Or Business Entity Suspected Of Misrepresenting Itself For The Purpose Of Securing A Government Contract May Be Criminally Investigated And Prosecuted For Fraud Against The United States Of America. Parties Found Misrepresenting Their Status Also Risk Debarment From Further Government Contracts. Eligibility Determination Is Performed By The Center For Veterans Enterprise (cve). Eligible Sdvosb Concerns Must Also Be Registered At The Following Websites: system For Award Management (sam): Https://www.sam.gov vets-4212 Federal Contractor Reporting Https://www.dol.gov/agencies/vets/programs/vets4212 important Notice: Prior To Submitting A Proposal Under This Sdvosb Set- Aside Solicitation; Offerors Must Apply For And Receive Verification From The Department Of Veteran Affairs Center For Veterans Enterprise (cve) In Accordance With 38 Cfr Part 74 And Vaar 819.70 By Submission Of Documentation Of Veteran Status, Ownership And Control Sufficient To Establish Appropriate Status. All Offerors Are Urged To Contact The Cve And Submit The Aforementioned Required Documents To Obtain Cve Verification Of Their Sdvosb Status If They Have Not Already Done So. for A Service-disabled Veteran Owned Small Business (sdvosb) To Be Considered As A Prospective Contractor, The Firm, Including Joint Ventures, Must Be Verified And Registered In The Department Of Veteran Affairs (va) Office Of Small & Disadvantaged Business Utilization (osdbu) Sba Vetcert: Https://veterans.certify.sba.gov/ And Registered In The System For Award Management (sam) Database (www.sam.gov) At Time Of Submission Of Their Qualifications. Failure Of A Prospective Sdvosb To Be Verified By The Center For Veterans Enterprise (cve) At The Time The Sf 330 Is Submitted Shall Result In Elimination From Consideration. All Joint Ventures Must Be Cve Verified At Time Of Submission And Submit Agreements That Comply With 13cfr 125.15 Prior To Contract Award. in Order To Assure Compliance With Far Clauses, 52.219-14 Limitations On Subcontracting (deviation 2019-01) And Vaar 852.219-10, Va Notice Of Total Service-disabled Veteran-owned Small Business Set-aside (jul 2019) (deviation), All Firms Submitting A Sf 330 For This Pre-solicitation Notice Are Required To Indicate What Percentage Of The Cost Of Contract Performance Will Be Expended On The Concerns Employees And In Which Discipline(s) And Percentage Of Cost Of Contract Performance To Be Expended (and In What Disciplines) By Any Other Consultant/subcontractor Or Otherwise Used Small Or Large Business Entity(s). Any Consultant/subcontractor Or Otherwise Business Entity(s) Used Must Be Identified By Name, Office Location And Size/type Of Business (i.e. Sdvosb, Vosb, 8(a), Small, Large, Etc.). Failure To Provide This Information Will Deem The Firm S Sf 330 Submittal As Nonresponsive And Preclude Further Evaluation. federal Acquisition Regulation (far) Part 36.6 (brooks Act) Selection Procedures Apply. The A-e Services Listed Herein Is Being Procured In Accordance With The Brooks Act (public Law 92-582) As Implemented In Federal Acquisition Regulation (far) 36.6 And Vaar 836.6. Pursuant To Far, The Firm Responding To This Requirement Must Be Permitted, By Law, To Practice The Professions Of Architecture Or Engineering And Meet All Required Qualifications For The State Of Georgia. sf 330 Selection Criteria: The Va Will Utilize The Following Selection Criteria In Relative Order Of Importance. specialized Experience And Technical Competence In The Type Of Work Required. submission Requirements: sf 330 Information Shall Be Provided Per The Latest Format From The Gsa Library Located At Https://www.gsa.gov/forms-library/architect-engineer-qualifications. complete Using Blocks F. And H. Of The Sf330 Form. Complete Block F. For Each Relevant Project. Complete Block H. Summary Sheet For The Offeror And Each Key Consultant; Each Summary Sheet Shall Be Not More Than One (1) Page In Length, And No More Than Ten (10) Pages Total. submit A Minimum Of Three (3) But No More Than Four (4) Projects Similar To Work In The Solicitation. projects Submitted Must Be Recent. Recent Is Defined As Services Provided Within The Last Five (5) Years. at Minimum, Two (2) Projects Must Have Construction Completed Or Construction Substantially (75%+) Complete. projects May Include Federal, State, Or Local Government, As Well As Private Industry Projects. Offerors Are Responsible For Providing Project Description And Applicable Information In Sufficient Detail To Permit Evaluation Of Project Relevancy Versus These Minimum Requirements. basis Of Evaluation: specialized Experience Pertains To The Types, Size, Volume, Budget, And Complexity Of Work Previously Or Currently Being Performed By The Offeror That Is Comparable To The Work Covered By This Solicitation. Specialized Experience May Also Include Unique Conditions, Considerations, Or Circumstances Encountered That Are Relevant To This Solicitation. specialized Experience Does Not Include Overseas Offices For Projects Outside The United States, Its Territories, Or Possessions; Nor Does It Include Subsidiaries That Are Not Normally Subject To Management Decisions, Accounting, And Policies, Or A Holding Or Parent Company Or An Incorporated Subsidiary That Operates Under A Firm Name Different From The Parent Company. technical Competence Includes Construction And Design Projects Similar In Project Scope, Size, Construction Features, Dollar Value, And Complexity Of That Listed In The Solicitation. Technical Competence Also Includes Experience In Energy Conservation, Pollution Prevention, Waste Reduction, And The Use Of Recovered Materials. similar Complexity Is Considered Projects Of An Operational, Construction, Or Design Likeness To The Work Covered In This Solicitation. offerors Unable To Demonstrate Proven Specialized Experience And Technical Competence May Be Considered Non-responsive Or Scored Negatively. higher Ratings May Be Given For Projects Completed On Va Campuses. failure To Provide Requested Data May Negatively Impact An Offeror's Rating. past Performance On Contracts With Government Agencies And Private Industry In Terms Of Cost Control, Quality Work, And Compliance With Performance Schedules. submission Requirements: complete Using Block H. Of The Sf 330 Describing The Offeror S Past Performance. The Summary Sheet Shall Be Not More Than Two (2) Pages In Length. provide A Contractor Performance Assessment Reporting System (cpars) Report For Each Submitted Project Under Specialized Experience Criteria, Above. Cpars Must Be Incorporated Into The Submission; Cpars Will Not Count Towards Page Limitations. If The Project Does Not Have Cpars, Then A Past Performance Questionnaire (ppq) May Be Used. basis Of Evaluation: past Performance Is A Measure Of The Degree To Which An Offeror Satisfied Its Customers Needs And Requirements And Compliance With Applicable Codes, Standards, Laws, And Regulations. The Evaluation Of Past Performance Will Include But Is Not Limited To: the Customer S Assessment Of The Offeror's Commitment To Customer Satisfaction; timely Delivery Of Quality Work; the Offeror's Record Of Conforming To Contract Requirements And Applicable Codes, Standards, Laws And Regulations; successful Implementation Of A Quality Control Plan And Quality Control Procedures; addressing Design Errors/omissions Timely; adherence To Approved Schedules; And, history Of Timely And Professional Communication And Cooperative Behavior. include Information On Problems (errors/omissions) Found, How The Problems Were Corrected, And The Impacts To The Successful Completion Of The Project (time Delays, Cost Impacts, Design Modifications, Etc.). provide Information Supporting Favorable Cost Control, Quality Of Design Submissions, And Schedule Compliance. offeror Risks Receiving A Lower Rating If Fewer Than Three (3) Ppqs Are Provided Or If The Ppqs Were Not Completed By Project Point Of Contact. include A Discussion On The Offeror S Record Of Significant Claims For Improper Or Incomplete Design Services. higher Ratings May Be Given For Work Performed On Va Medical Center Campuses. failure To Provide Requested Data Or To Provide An Accessible Point Of Contact (poc) May Negatively Impact An Offeror's Rating. failure To Demonstrate Proven Competence To Perform Projects Like The Requirements Of The Solicitation May Be Considered Ineligible For Award. professional Qualifications Necessary For Satisfactory Performance Of Required Services. submission Requirements: complete Using Block E. Of The Sf 330. Submit Personal Resumes And Relevant Information For Key And Responsible Personnel. Block E. Shall Be Not More Than One (1) Page In Length Per Individual, And Not More Than Fifteen (15) Total Pages. basis Of Evaluation: evaluation Of Professional Qualifications Will Include But Is Not Limited To The Subjective Assessment Of The Offeror's Individual Resumes. the Offeror Shall Have A Professional Engineer, Currently Registered In Any State Or Territory Of The United States, Knowledgeable In Their Registered Design Discipline, To Be The Lead Designer Responsible For Reviewing And Approving Design Submissions. the Offeror Shall Have A Professional Engineer, Qualified And Knowledgeable Of State And Local Regulations, Be The Lead Designer Responsible For Reviewing And Approving Design Submissions And Facilitating Permit Documentation (depending On The Nature Of The Design I.e. Environmental, Stormwater, Etc.). key Personnel To Provide Qualifications To Meet This Criterion Include Principal(s), Project Manager(s), Key Consultants, Individuals Responsible For Implementation Of The Design Qa/qc Plan, And Other Individuals That Are Responsible Or Accountable For Design Submissions. the Offeror Shall Describe And/or Depict Which Projects And How Well Key Personnel Of The Design Team Have Worked Together. higher Ratings For This Criterion May Be Given When The Offeror's Specific Personnel Demonstrate Relevant Credentials, Such As Involvement And Degree Of Involvement In Professional Organizations, Research/publications, Code/standard Body Involvement, Etc. offerors Unable To Demonstrate Professional Qualifications Necessary To Perform Designs May Be Considered Non-responsive . failure To Provide Sufficient Data Supporting Professional Qualifications May Negatively Impact An Offeror's Rating. location In The General Geographical Area Of Dublin, Ga And Knowledge Of The Locality Of The Carl Vinson Va Medical Center Facility: submission Requirements: complete Using Block H. Of The Sf 330. Provide A Narrative That Describes The Offeror S Experience In The Dublin, Ga Geographical Area. Narrative Shall Be Not More Than One (1) Page In Length. basis Of Evaluation: offerors Will Be Subjectively Evaluated Based On Their Knowledge (and The Knowledge Of Subcontractors) Of Unique Conditions Or Variables, Such As Familiarity Of Applicable Codes, Regulations, Construction Market & Labor Conditions, Geotechnical, Seismic, Weather, Environmental, Or Other Unique Considerations Found In Dublin, Ga And The Middle Georgia Area. if Prior Experience In Dublin, Ga Is Minimal, Describe How The Design Team Plans To Obtain Specific Knowledge Of Local Conditions Or Project Features Required For A Compliant Design. data From Other Projects And Locations Are Acceptable To Highlight Knowledge Of The Dublin, Ga Geographical Area Or Areas Of Similar Nature. offerors That Submit Relevant Projects Outside Of The Dublin, Ga Geographical Area May Be Given A Lower Rating Than Projects Within The Dublin, Ga Geographical Area. capacity To Accomplish The Work In The Required Time. submission Requirements: complete Using Block H. Of The Sf 330. Provide A Narrative That Describes The Offeror S Work Capacity. basis Of Evaluation: identify The Offeror S Past, Present And Projected Future Workload, Including Va Contracts Over The Previous 12 Months. describe The Offeror S Capacity To Incorporate This Solicitation S Work While Meeting Prescribed Dates For Current Workload. Each Key Team Member To Include % Of Available Capacity To Take On New Projects. evaluation Of This Factor Will Be An Assessment Of The Offeror S Ability To Complete Design Documents Within The Period Of Performance And Meet Solicitation Requirements. data Is Acceptable In Tables Or Charts. higher Ratings May Be Given For This Criterion When Information Provided Exceeds The Minimum Requirements. the Extent To Which Potential Contractors Identify And Commit To The Use Of Service-disabled Veteran-owned Small Businesses, Veteran-owned Small Businesses, And Other Types Of Small Businesses As Subcontractors: submission Requirements: complete Using Block H. Of The Sf 330. Provide A Narrative That Discusses The Offeror S Approach. Narrative Shall Be Not More Than One (1) Page In Length. offeror S Shall Complete And Submit The Following Statement In Block H. : I [signatory Authority], Of [offeror Company Or Joint Venture] Certify That The Team Proposed To Perform Under This Requirement Demonstrates The Capability Of 50% Sdvosb Performance In Compliance Of 48 Cfr 852.219-10 . basis Of Evaluation: offerors Shall Be Evaluated Based On Their Utilization Plans For Service-disabled Veteran-owned Small Businesses (sdvosbs), Veteran-owned Small Businesses (vosbs), Or Other Types Of Small Businesses. .

Details: The Subject Of The Design Competition Will Be The Comprehensive Architectural Design Of The New Building Of The Alšova South Bohemian Gallery Museum On Senovážné Square In České Budějovice. The Selected Architect/general Designer Team Will Subsequently Process All Project Phases Of The Investment Plan. The Purpose Of This Preliminary Notice Is To Survey The Market Regarding The Interest Of Potential Suppliers In The Proposal Competition. More Detailed Information On The Market Research Is Published On The Profile Of The Client. This Is Not A Preliminary Market Consultation. Publication Of The Preliminary Information Notice Does Not Initiate The Design Competition; The Contest Will Be Initiated With The Announcement Of The Contest Commencement..

Details: Description Bulacan Agricultural State College Early Procurement Activity For Construction Of 2-storey Agroforestry Building With Rainwater Catchment Facility November, 2024 Preface These Philippine Bidding Documents (pbds) For The Procurement Of Infrastructure Projects (hereinafter Referred To Also As The “works”) Through Competitive Bidding Have Been Prepared By The Government Of The Philippines For Use By All Branches, Agencies, Departments, Bureaus, Offices, Or Instrumentalities Of The Government, Including Government-owned And/or -controlled Corporations, Government Financial Institutions, State Universities And Colleges, Local Government Units, And Autonomous Regional Government. The Procedures And Practices Presented In This Document Have Been Developed Through Broad Experience, And Are For Mandatory Use In Projects That Are Financed In Whole Or In Part By The Government Of The Philippines Or Any Foreign Government/foreign Or International Financing Institution In Accordance With The Provisions Of The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. The Pbds Are Intended As A Model For Admeasurements (unit Prices Or Unit Rates In A Bill Of Quantities) Types Of Contract, Which Are The Most Common In Works Contracting. The Bidding Documents Shall Clearly And Adequately Define, Among Others: (i) The Objectives, Scope, And Expected Outputs And/or Results Of The Proposed Contract; (ii) The Eligibility Requirements Of Bidders; (iii) The Expected Contract Duration; And (iv) The Obligations, Duties, And/or Functions Of The Winning Bidder. Care Should Be Taken To Check The Relevance Of The Provisions Of The Pbds Against The Requirements Of The Specific Works To Be Procured. If Duplication Of A Subject Is Inevitable In Other Sections Of The Document Prepared By The Procuring Entity, Care Must Be Exercised To Avoid Contradictions Between Clauses Dealing With The Same Matter. Moreover, Each Section Is Prepared With Notes Intended Only As Information For The Procuring Entity Or The Person Drafting The Bidding Documents. They Shall Not Be Included In The Final Documents. The Following General Directions Should Be Observed When Using The Documents: A. All The Documents Listed In The Table Of Contents Are Normally Required For The Procurement Of Infrastructure Projects. However, They Should Be Adapted As Necessary To The Circumstances Of The Particular Project. B. Specific Details, Such As The “name Of The Procuring Entity” And “address For Bid Submission,” Should Be Furnished In The Instructions To Bidders, Bid Data Sheet, And Special Conditions Of Contract. The Final Documents Should Contain Neither Blank Spaces Nor Options. C. This Preface And The Footnotes Or Notes In Italics Included In The Invitation To Bid, Bds, General Conditions Of Contract, Special Conditions Of Contract, Specifications, Drawings, And Bill Of Quantities Are Not Part Of The Text Of The Final Document, Although They Contain Instructions That The Procuring Entity Should Strictly Follow. D. The Cover Should Be Modified As Required To Identify The Bidding Documents As To The Names Of The Project, Contract, And Procuring Entity, In Addition To Date Of Issue. E. Modifications For Specific Procurement Project Details Should Be Provided In The Special Conditions Of Contract As Amendments To The Conditions Of Contract. For Easy Completion, Whenever Reference Has To Be Made To Specific Clauses In The Bid Data Sheet Or Special Conditions Of Contract, These Terms Shall Be Printed In Bold Typeface On Sections I (instructions To Bidders) And Iii (general Conditions Of Contract), Respectively. F. For Guidelines On The Use Of Bidding Forms And The Procurement Of Foreign-assisted Projects, These Will Be Covered By A Separate Issuance Of The Government Procurement Policy Board. Table Of Contents Glossary Of Terms, Abbreviations, And Acronyms 5 Section I. Invitation To Bid 8 Section Ii. Instructions To Bidders 11 1. Scope Of Bid 12 2. Funding Information 12 3. Bidding Requirements 12 4. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices 12 5. Eligible Bidders 13 6. Origin Of Associated Goods 13 7. Subcontracts 13 8. Pre-bid Conference 13 9. Clarification And Amendment Of Bidding Documents 13 10. Documents Comprising The Bid: Eligibility And Technical Components 14 11. Documents Comprising The Bid: Financial Component 14 12. Alternative Bids 14 13. Bid Prices 15 14. Bid And Payment Currencies 15 15. Bid Security 15 16. Sealing And Marking Of Bids 15 17. Deadline For Submission Of Bids 16 18. Opening And Preliminary Examination Of Bids 16 19. Detailed Evaluation And Comparison Of Bids 16 20. Post Qualification 16 21. Signing Of The Contract 16 Section Iii. Bid Data Sheet 17 Section Iv. General Conditions Of Contract 20 1. Scope Of Contract 21 2. Sectional Completion Of Works 21 3. Possession Of Site 21 4. The Contractor’s Obligations 21 5. Performance Security 22 6. Site Investigation Reports 22 7. Warranty 22 8. Liability Of The Contractor 22 9. Termination For Other Causes 22 10. Dayworks 23 11. Program Of Work 23 12. Instructions, Inspections And Audits 23 13. Advance Payment 23 14. Progress Payments 23 15. Operating And Maintenance Manuals 24 Section V. Special Conditions Of Contract 25 Section Vi. Specifications 27 Section Vii. Drawings 37 Section Viii. Bill Of Quantities 58 Section Ix. Checklist Of Technical And Financial Documents 67 Glossary Of Terms, Abbreviations, And Acronyms Abc – Approved Budget For The Contract. Arcc – Allowable Range Of Contract Cost. Bac – Bids And Awards Committee. Bid – A Signed Offer Or Proposal To Undertake A Contract Submitted By A Bidder In Response To And In Consonance With The Requirements Of The Bidding Documents. Also Referred To As Proposal And Tender. (2016 Revised Irr, Section 5[c]) Bidder – Refers To A Contractor, Manufacturer, Supplier, Distributor And/or Consultant Who Submits A Bid In Response To The Requirements Of The Bidding Documents. (2016 Revised Irr, Section 5[d]) Bidding Documents – The Documents Issued By The Procuring Entity As The Bases For Bids, Furnishing All Information Necessary For A Prospective Bidder To Prepare A Bid For The Goods, Infrastructure Projects, And/or Consulting Services Required By The Procuring Entity. (2016 Revised Irr, Section 5[e]) Bir – Bureau Of Internal Revenue. Bsp – Bangko Sentral Ng Pilipinas. Cda – Cooperative Development Authority. Consulting Services – Refer To Services For Infrastructure Projects And Other Types Of Projects Or Activities Of The Gop Requiring Adequate External Technical And Professional Expertise That Are Beyond The Capability And/or Capacity Of The Gop To Undertake Such As, But Not Limited To: (i) Advisory And Review Services; (ii) Pre-investment Or Feasibility Studies; (iii) Design; (iv) Construction Supervision; (v) Management And Related Services; And (vi) Other Technical Services Or Special Studies. (2016 Revised Irr, Section 5[i]) Contract – Refers To The Agreement Entered Into Between The Procuring Entity And The Supplier Or Manufacturer Or Distributor Or Service Provider For Procurement Of Goods And Services; Contractor For Procurement Of Infrastructure Projects; Or Consultant Or Consulting Firm For Procurement Of Consulting Services; As The Case May Be, As Recorded In The Contract Form Signed By The Parties, Including All Attachments And Appendices Thereto And All Documents Incorporated By Reference Therein. Contractor – Is A Natural Or Juridical Entity Whose Proposal Was Accepted By The Procuring Entity And To Whom The Contract To Execute The Work Was Awarded. Contractor As Used In These Bidding Documents May Likewise Refer To A Supplier, Distributor, Manufacturer, Or Consultant. Cpi – Consumer Price Index. Dole – Department Of Labor And Employment. Dti – Department Of Trade And Industry. Foreign-funded Procurement Or Foreign-assisted Project – Refers To Procurement Whose Funding Source Is From A Foreign Government, Foreign Or International Financing Institution As Specified In The Treaty Or International Or Executive Agreement. (2016 Revised Irr, Section 5[b]). Gfi – Government Financial Institution. Gocc – Government-owned And/or –controlled Corporation. Goods – Refer To All Items, Supplies, Materials And General Support Services, Except Consulting Services And Infrastructure Projects, Which May Be Needed In The Transaction Of Public Businesses Or In The Pursuit Of Any Government Undertaking, Project Or Activity, Whether In The Nature Of Equipment, Furniture, Stationery, Materials For Construction, Or Personal Property Of Any Kind, Including Non-personal Or Contractual Services Such As The Repair And Maintenance Of Equipment And Furniture, As Well As Trucking, Hauling, Janitorial, Security, And Related Or Analogous Services, As Well As Procurement Of Materials And Supplies Provided By The Procuring Entity For Such Services. The Term “related” Or “analogous Services” Shall Include, But Is Not Limited To, Lease Or Purchase Of Office Space, Media Advertisements, Health Maintenance Services, And Other Services Essential To The Operation Of The Procuring Entity. (2016 Revised Irr, Section 5[r]) Gop – Government Of The Philippines. Infrastructure Projects – Include The Construction, Improvement, Rehabilitation, Demolition, Repair, Restoration Or Maintenance Of Roads And Bridges, Railways, Airports, Seaports, Communication Facilities, Civil Works Components Of Information Technology Projects, Irrigation, Flood Control And Drainage, Water Supply, Sanitation, Sewerage And Solid Waste Management Systems, Shore Protection, Energy/power And Electrification Facilities, National Buildings, School Buildings, Hospital Buildings, And Other Related Construction Projects Of The Government. Also Referred To As Civil Works Or Works. (2016 Revised Irr, Section 5[u]) Lgus – Local Government Units. Nfcc – Net Financial Contracting Capacity. Nga – National Government Agency. Pcab – Philippine Contractors Accreditation Board. Philgeps - Philippine Government Electronic Procurement System. Procurement Project – Refers To A Specific Or Identified Procurement Covering Goods, Infrastructure Project Or Consulting Services. A Procurement Project Shall Be Described, Detailed, And Scheduled In The Project Procurement Management Plan Prepared By The Agency Which Shall Be Consolidated In The Procuring Entity's Annual Procurement Plan. (gppb Circular No. 06-2019 Dated 17 July 2019) Psa – Philippine Statistics Authority. Sec – Securities And Exchange Commission. Slcc – Single Largest Completed Contract. Un – United Nations. Section I. Invitation To Bid Notes On The Invitation To Bid The Invitation To Bid (ib) Provides Information That Enables Potential Bidders To Decide Whether To Participate In The Procurement At Hand. The Ib Shall Be Posted In Accordance With Section 21.2 Of The 2016 Revised Irr Of Ra No. 9184. Apart From The Essential Items Listed In The Bidding Documents, The Ib Should Also Indicate The Following: A. The Date Of Availability Of The Bidding Documents, Which Shall Be From The Time The Ib Is First Advertised/posted Until The Deadline For The Submission And Receipt Of Bids; B. The Place Where The Bidding Documents May Be Acquired Or The Website Where It May Be Downloaded; C. The Deadline For The Submission And Receipt Of Bids; And D. Any Important Bid Evaluation Criteria. The Ib Should Be Incorporated Into The Bidding Documents. The Information Contained In The Ib Must Conform To The Bidding Documents And In Particular To The Relevant Information In The Bid Data Sheet. Bulacan Agricultural State College San Ildefonso, Bulacan, 3010 Invitation To Bid For Early Procurement Activity Construction Of 2-storey Agroforestry Building With Water Catchment Facility] 1. The Bulacan Agricultural State College, Through The General Appropriations Act Of 2025 (gaa) Under The Capital Outlay For The Fy 2025 Intends To Apply The Sum Of Twenty Five Million Pesos (php 25,000,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For 2024-01-infra: Construction Of 2-storey Agroforestry Building With Water Catchment Facility. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Bulacan Agricultural State College Now Invites Bids For The Above Procurement Project. Completion Of The Works Is Required On Or Before The Two Hundred Seventy (270) Calendar Days. Bidders Should Have Completed A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. 4. Interested Bidders May Obtain Further Information From Bulacan Agricultural State College And Inspect The Bidding Documents At The Address Given Below From From 8:30 Am To 4:30 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On November 9, 2024 To December 2, 2024 From Given Address And Website/s Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Twenty Five Thousand Pesos (php 25,000.00). Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees By Presenting The Receipt Upon Submission Of Their Bid Documents. 6. The Bulacan Agricultural State College Will Hold A Pre-bid Conference On November 18, 2024, 09:00 Am Via Zoom Platform (meeting Id: 828 5597 7530; Passcode: 662401) Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address As Indicated Below On Or Before 08:30 Am Of December 2, 2024. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 16. 9. Bid Opening Shall Be On December 2, 2024, 9:00am At The The Conference Room, Ground Floor, Farmers Training Center, Basc, San Ildefonso, Bulacan. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. Observers Will Be Invited To Attend And Witness The Bid Proceedings. 11. The Bulacan Agricultural State College Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 12. For Further Information, Please Refer To: Rona Angela O. Clarin Bac Secretariat Head Bulacan Agricultural State College Brgy. Pinaod, San Ildefonso, Bulacan (044) 697-1240 And 0923-108-1526 Ronaangela_clarin@basc.edu.ph Www.basc.edu.ph 13. You May Visit The Following Websites: Www.basc.edu.ph November 9, 2024 Ronald Reagan T. Alonzo,ph.d. Bac Chairperson Section Ii. Instructions To Bidders Notes On The Instructions To Bidders This Section On The Instruction To Bidders (itb) Provides The Information Necessary For Bidders To Prepare Responsive Bids, In Accordance With The Requirements Of The Procuring Entity. It Also Provides Information On Bid Submission, Eligibility Check, Opening And Evaluation Of Bids, Post-qualification, And On The Award Of Contract. 1. Scope Of Bid The Procuring Entity, Bulacan Agricultural State College Invites Bids For The Proposed Construction Of 2-storey Agroforestry Building With Water Catchment Facility, With Project Identification Number 2024-01-infra. The Procurement Project (proposed Construction Of 2-storey Agroforestry Building With Water Catchment Facility) Is For The Construction Of Works, As Described In Section Vi (specifications). 2. Funding Information 2.1. The Gop Through The Source Of Funding As Indicated Below For Gaa Fy 2025 In The Amount Of Php25,000,000.00 2.2. The Source Of Funding Is: A. Nga, The National Expenditure Program. 3. Bidding Requirements The Bidding For The Project Shall Be Governed By All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including Its Generic Procurement Manual And Associated Policies, Rules And Regulations As The Primary Source Thereof, While The Herein Clauses Shall Serve As The Secondary Source Thereof. Any Amendments Made To The Irr And Other Gppb Issuances Shall Be Applicable Only To The Ongoing Posting, Advertisement, Or Invitation To Bid By The Bac Through The Issuance Of A Supplemental Or Bid Bulletin. The Bidder, By The Act Of Submitting Its Bid, Shall Be Deemed To Have Inspected The Site, Determined The General Characteristics Of The Contracted Works And The Conditions For This Project, Such As The Location And The Nature Of The Work; (b) Climatic Conditions; (c) Transportation Facilities; (c) Nature And Condition Of The Terrain, Geological Conditions At The Site Communication Facilities, Requirements, Location And Availability Of Construction Aggregates And Other Materials, Labor, Water, Electric Power And Access Roads; And (d) Other Factors That May Affect The Cost, Duration And Execution Or Implementation Of The Contract, Project, Or Work And Examine All Instructions, Forms, Terms, And Project Requirements In The Bidding Documents. 4. Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices The Procuring Entity, As Well As The Bidders And Contractors, Shall Observe The Highest Standard Of Ethics During The Procurement And Execution Of The Contract. They Or Through An Agent Shall Not Engage In Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices Defined Under Annex “i” Of The 2016 Revised Irr Of Ra No. 9184 Or Other Integrity Violations In Competing For The Project. 5. Eligible Bidders 5.1. Only Bids Of Bidders Found To Be Legally, Technically, And Financially Capable Will Be Evaluated. 5.2. The Bidder Must Have An Experience Of Having Completed A Single Largest Completed Contract (slcc) That Is Similar To This Project, Equivalent To At Least Fifty Percent (50%) Of The Abc Adjusted, If Necessary, By The Bidder To Current Prices Using The Psa’s Cpi, Except Under Conditions Provided For In Section 23.4.2.4 Of The 2016 Revised Irr Of Ra No. 9184. A Contract Is Considered To Be “similar” To The Contract To Be Bid If It Has The Major Categories Of Work Stated In The Bds. 5.3. For Foreign-funded Procurement, The Procuring Entity And The Foreign Government/foreign Or International Financing Institution May Agree On Another Track Record Requirement, As Specified In The Bidding Document Prepared For This Purpose. 5.4. The Bidders Shall Comply With The Eligibility Criteria Under Section 23.4.2 Of The 2016 Irr Of Ra No. 9184. 6. Origin Of Associated Goods There Is No Restriction On The Origin Of Goods Other Than Those Prohibited By A Decision Of The Un Security Council Taken Under Chapter Vii Of The Charter Of The Un. 7. Subcontracts 7.1. The Procuring Entity Has Prescribed That: A. Subcontracting Is Not Allowed. 8. Pre-bid Conference The Procuring Entity Will Hold A Pre-bid Conference For This Project On The Specified Date And Time Via Online Platform As Indicated In Paragraph 6 Of The Ib. 9. Clarification And Amendment Of Bidding Documents Prospective Bidders May Request For Clarification On And/or Interpretation Of Any Part Of The Bidding Documents. Such Requests Must Be In Writing And Received By The Procuring Entity, Either At Its Given Address Or Through Electronic Mail Indicated In The Ib, At Least Ten (10) Calendar Days Before The Deadline Set For The Submission And Receipt Of Bids. 10. Documents Comprising The Bid: Eligibility And Technical Components 10.1. The First Envelope Shall Contain The Eligibility And Technical Documents Of The Bid As Specified In Section Ix. Checklist Of Technical And Financial Documents. 10.2. If The Eligibility Requirements Or Statements, The Bids, And All Other Documents For Submission To The Bac Are In Foreign Language Other Than English, It Must Be Accompanied By A Translation In English, Which Shall Be Authenticated By The Appropriate Philippine Foreign Service Establishment, Post, Or The Equivalent Office Having Jurisdiction Over The Foreign Bidder’s Affairs In The Philippines. For Contracting Parties To The Apostille Convention, Only The Translated Documents Shall Be Authenticated Through An Apostille Pursuant To Gppb Resolution No. 13-2019 Dated 23 May 2019. The English Translation Shall Govern, For Purposes Of Interpretation Of The Bid. 10.3. A Valid Pcab License Is Required, And In Case Of Joint Ventures, A Valid Special Pcab License, And Registration For The Type And Cost Of The Contract For This Project. Any Additional Type Of Contractor License Or Permit Shall Be Indicated In The Bds. 10.4. A List Of Contractor’s Key Personnel (e.g., Project Manager, Project Engineers, Materials Engineers, And Foremen) Assigned To The Contract To Be Bid, With Their Complete Qualification And Experience Data Shall Be Provided. These Key Personnel Must Meet The Required Minimum Years Of Experience Set In The Bds. 10.5. A List Of Contractor’s Major Equipment Units, Which Are Owned, Leased, And/or Under Purchase Agreements, Supported By Proof Of Ownership, Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project, As The Case May Be, Must Meet The Minimum Requirements For The Contract Set In The Bds. 11. Documents Comprising The Bid: Financial Component 11.1. The Second Bid Envelope Shall Contain The Financial Documents For The Bid As Specified In Section Ix. Checklist Of Technical And Financial Documents. 11.2. Any Bid Exceeding The Abc Indicated In Paragraph 1 Of The Ib Shall Not Be Accepted. 11.3. For Foreign-funded Procurement, A Ceiling May Be Applied To Bid Prices Provided The Conditions Are Met Under Section 31.2 Of The 2016 Revised Irr Of Ra No. 9184. 12. Alternative Bids Bidders Shall Submit Offers That Comply With The Requirements Of The Bidding Documents, Including The Basic Technical Design As Indicated In The Drawings And Specifications. Unless There Is A Value Engineering Clause In The Bds, Alternative Bids Shall Not Be Accepted. 13. Bid Prices All Bid Prices For The Given Scope Of Work In The Project As Awarded Shall Be Considered As Fixed Prices, And Therefore Not Subject To Price Escalation During Contract Implementation, Except Under Extraordinary Circumstances As Determined By The Neda And Approved By The Gppb Pursuant To The Revised Guidelines For Contract Price Escalation Guidelines. 14. Bid And Payment Currencies 14.1. Bid Prices May Be Quoted In The Local Currency Or Tradeable Currency Accepted By The Bsp At The Discretion Of The Bidder. However, For Purposes Of Bid Evaluation, Bids Denominated In Foreign Currencies Shall Be Converted To Philippine Currency Based On The Exchange Rate As Published In The Bsp Reference Rate Bulletin On The Day Of The Bid Opening. 14.2. Payment Of The Contract Price Shall Be Made In: A. Philippine Pesos. 15. Bid Security 15.1. The Bidder Shall Submit A Bid Securing Declaration Or Any Form Of Bid Security In The Amount Indicated In The Bds, Which Shall Be Not Less Than The Percentage Of The Abc In Accordance With The Schedule In The Bds. 15.2. The Bid And Bid Security Shall Be Valid Until 120 Days From The Opening Of Bids. Any Bid Not Accompanied By An Acceptable Bid Security Shall Be Rejected By The Procuring Entity As Non-responsive. 16. Sealing And Marking Of Bids Each Bidder Shall Submit One Copy Of The Original Of The First And Second Components Of Its Bid And Plus Two (2) Copies Of Each Kind, Labeled As Copy 1 And Copy 2. Each Bidder Shall Submit One Copy Of The First And Second Components Of Its Bid. The Procuring Entity May Request Additional Hard Copies And/or Electronic Copies Of The Bid. However, Failure Of The Bidders To Comply With The Said Request Shall Not Be A Ground For Disqualification. If The Procuring Entity Allows The Submission Of Bids Through Online Submission To The Given Website Or Any Other Electronic Means, The Bidder Shall Submit An Electronic Copy Of Its Bid, Which Must Be Digitally Signed. An Electronic Copy That Cannot Be Opened Or Is Corrupted Shall Be Considered Non-responsive And, Thus, Automatically Disqualified. 17. Deadline For Submission Of Bids The Bidders Shall Submit On The Specified Date And Time And Either At Its Physical Address Or Through Online Submission As Indicated In Paragraph 7 Of The Ib. 18. Opening And Preliminary Examination Of Bids 18.1. The Bac Shall Open The Bids In Public At The Time, On The Date, And At The Place Specified In Paragraph 9 Of The Ib. The Bidders’ Representatives Who Are Present Shall Sign A Register Evidencing Their Attendance. In Case Videoconferencing, Webcasting Or Other Similar Technologies Will Be Used, Attendance Of Participants Shall Likewise Be Recorded By The Bac Secretariat. In Case The Bids Cannot Be Opened As Scheduled Due To Justifiable Reasons, The Rescheduling Requirements Under Section 29 Of The 2016 Revised Irr Of Ra No. 9184 Shall Prevail. 18.2. The Preliminary Examination Of Bids Shall Be Governed By Section 30 Of The 2016 Revised Irr Of Ra No. 9184. 19. Detailed Evaluation And Comparison Of Bids 19.1. The Procuring Entity’s Bac Shall Immediately Conduct A Detailed Evaluation Of All Bids Rated “passed” Using Non-discretionary Pass/fail Criteria. The Bac Shall Consider The Conditions In The Evaluation Of Bids Under Section 32.2 Of 2016 Revised Irr Of Ra No. 9184. 19.2. If The Project Allows Partial Bids, All Bids And Combinations Of Bids As Indicated In The Bds Shall Be Received By The Same Deadline And Opened And Evaluated Simultaneously So As To Determine The Bid Or Combination Of Bids Offering The Lowest Calculated Cost To The Procuring Entity. Bid Security As Required By Itb Clause 16 Shall Be Submitted For Each Contract (lot) Separately. 19.3. In All Cases, The Nfcc Computation Pursuant To Section 23.4.2.6 Of The 2016 Revised Irr Of Ra No. 9184 Must Be Sufficient For The Total Of The Abcs For All The Lots Participated In By The Prospective Bidder. 20. Post Qualification Within A Non-extendible Period Of Five (5) Calendar Days From Receipt By The Bidder Of The Notice From The Bac That It Submitted The Lowest Calculated Bid, The Bidder Shall Submit Its Latest Income And Business Tax Returns Filed And Paid Through The Bir Electronic Filing And Payment System (efps), And Other Appropriate Licenses And Permits Required By Law And Stated In The Bds. 21. Signing Of The Contract The Documents Required In Section 37.2 Of The 2016 Revised Irr Of Ra No. 9184 Shall Form Part Of The Contract. Additional Contract Documents Are Indicated In The Bds. Section Iii. Bid Data Sheet Notes On The Bid Data Sheet (bds) The Bid Data Sheet (bds) Consists Of Provisions That Supplement, Amend, Or Specify In Detail, Information, Or Requirements Included In The Itb Found In Section Ii, Which Are Specific To Each Procurement. This Section Is Intended To Assist The Procuring Entity In Providing The Specific Information In Relation To Corresponding Clauses In The Itb And Has To Be Prepared For Each Specific Procurement. The Procuring Entity Should Specify In The Bds Information And Requirements Specific To The Circumstances Of The Procuring Entity, The Processing Of The Procurement, And The Bid Evaluation Criteria That Will Apply To The Bids. In Preparing The Bds, The Following Aspects Should Be Checked: A. Information That Specifies And Complements Provisions Of The Itb Must Be Incorporated. B. Amendments And/or Supplements, If Any, To Provisions Of The Itb As Necessitated By The Circumstances Of The Specific Procurement, Must Also Be Incorporated. Bid Data Sheet Itb Clause 5.2 For This Purpose, Contracts Similar To The Project Refer To Contracts Which Have The Same Major Categories Of Work, Which Shall Be: Construction, Renovation, Rehabilitation, Repair Of School, Laboratory And Office Buildings. 7.1 Subcontracting Is Not Allowed. 10.3 Appropriate Pcab License Commensurate To The Project. 10.4 The Key Personnel Must Meet The Required Minimum Years Of Experience Set Below: Key Personnel General Experience Relevant Experience Civil Engineer/ Architect At Least 5 Years At Least 5 Years Materials Engineer At Least 5 Years At Least 5 Years Foreman At Least 5 Years At Least 5 Years Safety Officer At Least 5 Years At Least 5 Years Skilled Laborer At Least 3 Years At Least 3 Years Laborer - - 10.5 The Minimum Major Equipment Requirements Are The Following: Equipment Capacity Number Of Units Mini Dump Truck Or Elf Truck 1 Concrete Mixer One Bagger 2 Cut Off/ Bar Cutter - 2 Bar Bender - 2 Concrete Vibrator - 2 Welding Machine Heavy Duty 2 12 Alternative Bids Are Not Allowed. 15.1 The Bid Security Shall Be In The Form Of A Bid Securing Declaration Or Any Of The Following Forms And Amounts: A. The Amount Of Not Less Than Php500,000.0 [two Percent (2%) Of Abc], If Bid Security Is In Cash, Cashier’s/manager’s Check, Bank Draft/guarantee Or Irrevocable Letter Of Credit; B. The Amount Of Not Less Than P1,250,000.00 [ Five Percent (5%) Of Abc] If Bid Security Is In Surety Bond. 19.2 Partial Bids Are Not Allowed. 20 Building Permit, Occupancy Permit, Locational Clearance, Environmental Compliance Certificate, Certification That The Project Site Is Not Within A Geohazard Zone.etc. 21 Additional Contract Documents Relevant To The Project That May Be Required By Existing Laws And/or The Procuring Entity, Such As Construction Schedule And S-curve, Manpower Schedule, Construction Methods, Equipment Utilization Schedule, Construction Safety And Health Program Approved By The Dole, And (pert/cpm) Or Other Acceptable Tools Of Project Scheduling. Section Iv. General Conditions Of Contract Notes On The General Conditions Of Contract The General Conditions Of Contract (gcc) In This Section, Read In Conjunction With The Special Conditions Of Contract In Section V And Other Documents Listed Therein, Should Be A Complete Document Expressing All The Rights And Obligations Of The Parties. Matters Governing Performance Of The Contractor, Payments Under The Contract, Or Matters Affecting The Risks, Rights, And Obligations Of The Parties Under The Contract Are Included In The Gcc And Special Conditions Of Contract. Any Complementary Information, Which May Be Needed, Shall Be Introduced Only Through The Special Conditions Of Contract. 1. Scope Of Contract This Contract Shall Include All Such Items, Although Not Specifically Mentioned, That Can Be Reasonably Inferred As Being Required For Its Completion As If Such Items Were Expressly Mentioned Herein. All The Provisions Of Ra No. 9184 And Its 2016 Revised Irr, Including The Generic Procurement Manual, And Associated Issuances, Constitute The Primary Source For The Terms And Conditions Of The Contract, And Thus, Applicable In Contract Implementation. Herein Clauses Shall Serve As The Secondary Source For The Terms And Conditions Of The Contract. This Is Without Prejudice To Sections 74.1 And 74.2 Of The 2016 Revised Irr Of Ra No. 9184 Allowing The Gppb To Amend The Irr, Which Shall Be Applied To All Procurement Activities, The Advertisement, Posting, Or Invitation Of Which Were Issued After The Effectivity Of The Said Amendment. 2. Sectional Completion Of Works If Sectional Completion Is Specified In The Special Conditions Of Contract (scc), References In The Conditions Of Contract To The Works, The Completion Date, And The Intended Completion Date Shall Apply To Any Section Of The Works (other Than References To The Completion Date And Intended Completion Date For The Whole Of The Works). 3. Possession Of Site 4.1. The Procuring Entity Shall Give Possession Of All Or Parts Of The Site To The Contractor Based On The Schedule Of Delivery Indicated In The Scc, Which Corresponds To The Execution Of The Works. If The Contractor Suffers Delay Or Incurs Cost From Failure On The Part Of The Procuring Entity To Give Possession In Accordance With The Terms Of This Clause, The Procuring Entity’s Representative Shall Give The Contractor A Contract Time Extension And Certify Such Sum As Fair To Cover The Cost Incurred, Which Sum Shall Be Paid By Procuring Entity. 4.2. If Possession Of A Portion Is Not Given By The Above Date, The Procuring Entity Will Be Deemed To Have Delayed The Start Of The Relevant Activities. The Resulting Adjustments In Contract Time To Address Such Delay May Be Addressed Through Contract Extension Provided Under Annex “e” Of The 2016 Revised Irr Of Ra No. 9184. 4. The Contractor’s Obligations The Contractor Shall Employ The Key Personnel Named In The Schedule Of Key Personnel Indicating Their Designation, In Accordance With Itb Clause 10.3 And Specified In The Bds, To Carry Out The Supervision Of The Works. The Procuring Entity Will Approve Any Proposed Replacement Of Key Personnel Only If Their Relevant Qualifications And Abilities Are Equal To Or Better Than Those Of The Personnel Listed In The Schedule. 5. Performance Security 5.1. Within Ten (10) Calendar Days From Receipt Of The Notice Of Award From The Procuring Entity But In No Case Later Than The Signing Of The Contract By Both Parties, The Successful Bidder Shall Furnish The Performance Security In Any Of The Forms Prescribed In Section 39 Of The 2016 Revised Irr. 5.2. The Contractor, By Entering Into The Contract With The Procuring Entity, Acknowledges The Right Of The Procuring Entity To Institute Action Pursuant To Ra No. 3688 Against Any Subcontractor Be They An Individual, Firm, Partnership, Corporation, Or Association Supplying The Contractor With Labor, Materials And/or Equipment For The Performance Of This Contract. 6. Site Investigation Reports The Contractor, In Preparing The Bid, Shall Rely On Any Site Investigation Reports Referred To In The Scc Supplemented By Any Information Obtained By The Contractor. 7. Warranty 7.1. In Case The Contractor Fails To Undertake The Repair Works Under Section 62.2.2 Of The 2016 Revised Irr, The Procuring Entity Shall Forfeit Its Performance Security, Subject Its Property(ies) To Attachment Or Garnishment Proceedings, And Perpetually Disqualify It From Participating In Any Public Bidding. All Payables Of The Gop In His Favor Shall Be Offset To Recover The Costs. 7.2. The Warranty Against Structural Defects/failures, Except That Occasioned-on Force Majeure, Shall Cover The Period From The Date Of Issuance Of The Certificate Of Final Acceptance By The Procuring Entity. Specific Duration Of The Warranty Is Found In The Scc. 8. Liability Of The Contractor Subject To Additional Provisions, If Any, Set Forth In The Scc, The Contractor’s Liability Under This Contract Shall Be As Provided By The Laws Of The Republic Of The Philippines. If The Contractor Is A Joint Venture, All Partners To The Joint Venture Shall Be Jointly And Severally Liable To The Procuring Entity. 9. Termination For Other Causes Contract Termination Shall Be Initiated In Case It Is Determined Prima Facie By The Procuring Entity That The Contractor Has Engaged, Before, Or During The Implementation Of The Contract, In Unlawful Deeds And Behaviors Relative To Contract Acquisition And Implementation, Such As, But Not Limited To Corrupt, Fraudulent, Collusive, Coercive, And Obstructive Practices As Stated In Itb Clause 4. 10. Dayworks Subject To The Guidelines On Variation Order In Annex “e” Of The 2016 Revised Irr Of Ra No. 9184, And If Applicable As Indicated In The Scc, The Dayworks Rates In The Contractor’s Bid Shall Be Used For Small Additional Amounts Of Work Only When The Procuring Entity’s Representative Has Given Written Instructions In Advance For Additional Work To Be Paid For In That Way. 11. Program Of Work 11.1. The Contractor Shall Submit To The Procuring Entity’s Representative For Approval The Said Program Of Work Showing The General Methods, Arrangements, Order, And Timing For All The Activities In The Works. The Submissions Of The Program Of Work Are Indicated In The Scc. 11.2. The Contractor Shall Submit To The Procuring Entity’s Representative For Approval An Updated Program Of Work At Intervals No Longer Than The Period Stated In The Scc. If The Contractor Does Not Submit An Updated Program Of Work Within This Period, The Procuring Entity’s Representative May Withhold The Amount Stated In The Scc From The Next Payment Certificate And Continue To Withhold This Amount Until The Next Payment After The Date On Which The Overdue Program Of Work Has Been Submitted. 12. Instructions, Inspections And Audits The Contractor Shall Permit The Gop Or The Procuring Entity To Inspect The Contractor’s Accounts And Records Relating To The Performance Of The Contractor And To Have Them Audited By Auditors Of The Gop Or The Procuring Entity, As May Be Required. 13. Advance Payment The Procuring Entity Shall, Upon A Written Request Of The Contractor Which Shall Be Submitted As A Contract Document, Make An Advance Payment To The Contractor In An Amount Not Exceeding Fifteen Percent (15%) Of The Total Contract Price, To Be Made In Lump Sum, Or At The Most Two Installments According To A Schedule Specified In The Scc, Subject To The Requirements In Annex “e” Of The 2016 Revised Irr Of Ra No. 9184. 14. Progress Payments The Contractor May Submit A Request For Payment For Work Accomplished. Such Requests For Payment Shall Be Verified And Certified By The Procuring Entity’s Representative/project Engineer. Except As Otherwise Stipulated In The Scc, Materials And Equipment Delivered On The Site But Not Completely Put In Place Shall Not Be Included For Payment. 15. Operating And Maintenance Manuals 15.1. If Required, The Contractor Will Provide “as Built” Drawings And/or Operating And Maintenance Manuals As Specified In The Scc. 15.2. If The Contractor Does Not Provide The Drawings And/or Manuals By The Dates Stated Above, Or They Do Not Receive The Procuring Entity’s Representative’s Approval, The Procuring Entity’s Representative May Withhold The Amount Stated In The Scc From Payments Due To The Contractor. Section V. Special Conditions Of Contract Notes On The Special Conditions Of Contract Similar To The Bds, The Clauses In This Section Are Intended To Assist The Procuring Entity In Providing Contract-specific Information In Relation To Corresponding Clauses In The Gcc Found In Section Iv. The Special Conditions Of Contract (scc) Complement The Gcc, Specifying Contractual Requirements Linked To The Special Circumstances Of The Procuring Entity, The Procuring Entity’s Country, The Sector, And The Works Procured. In Preparing This Section, The Following Aspects Should Be Checked: A. Information That Complements Provisions Of The Gcc Must Be Incorporated. B. Amendments And/or Supplements To Provisions Of The Gcc As Necessitated By The Circumstances Of The Specific Purchase, Must Also Be Incorporated. However, No Special Condition Which Defeats Or Negates The General Intent And Purpose Of The Provisions Of The Gcc Should Be Incorporated Herein. Special Conditions Of Contract Gcc Clause 2 The Intended Completion Date Of Construction Of 2-storey Agroforestry Building With Rainwater Catchment Facility Is Two Hundred Seventy (270) Calendar Days From The Date Of The Receipt Of Notice To Proceed. 4.1 The Schedule Of Delivery Of The Possession Of The Site To The Contractor Is Upon The Receipt Of The Notice To Proceed. 6 The Site Investigation Reports Are: 7.2 In Case Of Permanent Structures, Such As Buildings Of Types 4 And 5 As Classified Under The National Building Code Of The Philippines And Other Structures Made Of Steel, Iron, Or Concrete Which Comply With Relevant Structural Codes (e.g., Dpwh Standard Specifications), Such As, But Not Limited To, Steel/concrete Bridges, Flyovers, Aircraft Movement Areas, Ports, Dams, Tunnels, Filtration And Treatment Plants, Sewerage Systems, Power Plants, Transmission And Communication Towers, Railway System, And Other Similar Permanent Structures:] Fifteen (15) Years. 10 A. Dayworks Are Applicable At The Rate Shown In The Contractor’s Original Bid. 11.1 The Contractor Shall Submit The Program Of Work To The Procuring Entity’s Representative Within 7 Calendar Days Of Delivery Of The Notice Of Award. 11.2 The Amount To Be Withheld For Late Submission Of An Updated Program Of Work Is 1% Of The Progress Billing. 13 The Amount Of The Advance Payment Is Fifteen Percent (15%) Of The Contract Price To Be Paid Upon Written Request Of The Contractor Reconciling On The Date Of The Notice To Proceed And Upon Submission Of An Irrevocable Standby Letter Of Credit Of Equivalent Value From A Commercial Bank, And Bank Guarantee Or A Surety Bond Callable Upon Demand, Issued By A Surety Or Insurance Company Duly Licensed By The Insurance Commission. 14 Materials And Equipment Delivered On The Site But Not Completely Put In Place Shall Not Be Included For Payment. 15.1 The Date By Which “as Built” Drawings Are Required Is Fifteen (15) Calendar Days From Completion Of Project. 15.2 The Amount To Be Withheld For Failing To Produce “as Built” Drawings And/or Operating And Maintenance Manuals By The Date Required Is 0.1% Of The Final Contract Amount. Section Vi. Specifications Notes On Specifications A Set Of Precise And Clear Specifications Is A Prerequisite For Bidders To Respond Realistically And Competitively To The Requirements Of The Procuring Entity Without Qualifying Or Conditioning Their Bids. In The Context Of International Competitive Bidding, The Specifications Must Be Drafted To Permit The Widest Possible Competition And, At The Same Time, Present A Clear Statement Of The Required Standards Of Workmanship, Materials, And Performance Of The Goods And Services To Be Procured. Only If This Is Done Will The Objectives Of Economy, Efficiency, And Fairness In Procurement Be Realized, Responsiveness Of Bids Be Ensured, And The Subsequent Task Of Bid Evaluation Facilitated. The Specifications Should Require That All Goods And Materials To Be Incorporated In The Works Be New, Unused, Of The Most Recent Or Current Models, And Incorporate All Recent Improvements In Design And Materials Unless Provided Otherwise In The Contract. Samples Of Specifications From Previous Similar Projects Are Useful In This Respect. The Use Of Metric Units Is Mandatory. Most Specifications Are Normally Written Specially By The Procuring Entity Or Its Representative To Suit The Works At Hand. There Is No Standard Set Of Specifications For Universal Application In All Sectors In All Regions, But There Are Established Principles And Practices, Which Are Reflected In These Pbds. There Are Considerable Advantages In Standardizing General Specifications For Repetitive Works In Recognized Public Sectors, Such As Highways, Ports, Railways, Urban Housing, Irrigation, And Water Supply, In The Same Country Or Region Where Similar Conditions Prevail. The General Specifications Should Cover All Classes Of Workmanship, Materials, And Equipment Commonly Involved In Construction, Although Not Necessarily To Be Used In A Particular Works Contract. Deletions Or Addenda Should Then Adapt The General Specifications To The Particular Works. Care Must Be Taken In Drafting Specifications To Ensure That They Are Not Restrictive. In The Specification Of Standards For Goods, Materials, And Workmanship, Recognized International Standards Should Be Used As Much As Possible. Where Other Particular Standards Are Used, Whether National Standards Or Other Standards, The Specifications Should State That Goods, Materials, And Workmanship That Meet Other Authoritative Standards, And Which Ensure Substantially Equal Or Higher Quality Than The Standards Mentioned, Will Also Be Acceptable. The Following Clause May Be Inserted In The Scc. Sample Clause: Equivalency Of Standards And Codes Wherever Reference Is Made In The Contract To Specific Standards And Codes To Be Met By The Goods And Materials To Be Furnished, And Work Performed Or Tested, The Provisions Of The Latest Current Edition Or Revision Of The Relevant Standards And Codes In Effect Shall Apply, Unless Otherwise Expressly Stated In The Contract. Where Such Standards And Codes Are National, Or Relate To A Particular Country Or Region, Other Authoritative Standards That Ensure A Substantially Equal Or Higher Quality Than The Standards And Codes Specified Will Be Accepted Subject To The Procuring Entity’s Representative’s Prior Review And Written Consent. Differences Between The Standards Specified And The Proposed Alternative Standards Shall Be Fully Described In Writing By The Contractor And Submitted To The Procuring Entity’s Representative At Least Twenty-eight (28) Days Prior To The Date When The Contractor Desires The Procuring Entity’s Representative’s Consent. In The Event The Procuring Entity’s Representative Determines That Such Proposed Deviations Do Not Ensure Substantially Equal Or Higher Quality, The Contractor Shall Comply With The Standards Specified In The Documents. These Notes Are Intended Only As Information For The Procuring Entity Or The Person Drafting The Bidding Documents. They Should Not Be Included In The Final Bidding Documents. Proposed Construction Of 2-storey Agroforestry Building With Rainwater Catchment Facility Basc Drt Campus Technical Specifications Bulacan Agricultural State College Pinaod, San Ildefonso, Bulacan November 2024  Specifications 1. General Requirements 1.1 These Specifications Are Intended To Cover All Labor And Materials Required For The Complete Construction Of The Proposed Projects As Shown In The Working Drawings As Described Herein. 1.2 Materials And/ Or Work Not Specifically Mentioned In The Specifications, Working Drawings, And Other Contract Documents But Is Implied And Deemed Necessary To Complete The Work Shall Be Supplied By The Contractor And Executed In A Workman-like Manner, Of Appropriate Number, Location, And Size Of The Highest Quality Available Without Extra Cost To The Owner. 1.3 The Owner Reserves The Right To Alter And/or Omit Any Part Of The Plans With The Approval Of The Architect Or Engineer As The Case May Be. Any Extra Charge Must Be Situated To The Architect And/or Project Manager For Approval Before Final Acceptance. 1.4 The Contractor Shall Secure All Permits And Licenses As Required And Also Shall Be Responsable For All The Liabilities, Under Workmen’s Compensation, Sss, Insurance, Etc. 1.5 The Contractor Shall Furnish For Approval Of The Architect/engineer, With Promptness, Samples As Specified Or Required. Works Shall Be In Accordance With The Approved Samples. 1.6 The Contractor Shall Guarantee The Words, Except For Those With Specific Guarantee For A Period Of One (1) Year After Final Acceptance By The Owner. He Shall Repair,replace And Make Good At His Expenses Any And All Defects, Which May Arise During That Term Of Guarantee And Warranty Due To Defective Workmanship And/or Interior Quality Of Materials. 2. Methods Of Construction 2.1 The Construction Shall Be Done In The Manner That Would Cause Least Disturbance To Neighborhood And Occupant Of The Area. The Contractor Will Be Allowed To Work 24 Hours If Necessary To Complete The Work On Time Subject To Approval Of The Owner. 2.2 All Works To Be Done Shall Be Of The Best Quality And Workmanship. 3. Masonry 3.1 Exterior Wall Should Be Chb 5 Inches Wall Bearing With 10 Mm Diameter Reinforcement Bars Spaced @ 0.80 Meter For Vertical And For Every 3 Layers Of Chb For Horizontal Bars. 3.2 Partition Wall Should Be Chb 4 Inches With 10 Mm Diameter Reinforcement Bars Spaced @ 0.80 Meter For Vertical And For Every 3 Layers Of Chb For Horizontal Bars In Rooms,hallway,and Toilet. 3.3 Low Partition Should Be Chb 4 Inches 1.80 Meters High With 10 Mm Diameter Reinforcement Bars Spaced @ 0.80 Meters For Vertical And For Every 3 Layer Of Chb For Horizontal Bars In Toilet Partition/cubicles. 4. Wall Finishes 4.1. Interior Walls Finishes Should Be Smooth Plain Cement Plaster; Concrete Neutralizer Treatment; Patching; Paint Finish (boysen Paint Or Approved Equal) W/ 4” Base Board. Note: Patchwork Should Be Followed With One Coat Of Concrete Primer As Primer-surfacer To Reduce Unsightly Uneven Appearance After Topcoat Application. 4.2. Exterior Wall Finishes Should Be Smooth Plain Cement Plaster; Concrete Neutralizer Treatment; Patching; 2 Coat Paint Finish (boysen Paint Or Approved Equal). 4.3. Provide 40 Cm X 40 Cm Glazed Wall Tiles (eurotiles Or Approved Equal) From Finish Floor Line To 1.80 Meter High, For All Toilet And Cubicles 4.4. Provide 40 Cm X 40 Cm Glazed Wall Tiles (eurotiles Or Approved Equal) For Splashboards For Lavatories In Laboratory/ Kitchen. 4.5. Provide 2” Thick Simulated Stone Cladding (asi, Stone Age Or Approved Equal), See Plans And Drawings. 5. Ceiling Finishes 5.1. All Interior Ceiling - 6 Mm Thick Fiber Cement Hardiflex Ceiling Board Riveted On Metal Furring Channels Providing A V-cut In Every Joint; Prevent Rivet Head To Exposed In Ceiling Surface; Patching All Rivets And Joints W/ Skim Coat; 2 Coat Paint Finish Flat Latex Paint (boysen Or Approved Equal). 5.2. Outside Ceiling – 8” X L X 0.4 Mm Thick Spandrel (union Brand Or Approved Equal). 5.3. Provide Eaves Hole For Ventilation (see Plans And Drawings) 5.4. Provide 4” Ceiling Drop If Necessary (see Plans And Drawings). 6. Carpentry Works 6.1. Cabinets Beneath The Lavatory/ Kitchen Counters In 2” X 3” Kd Treated Wood Frame; ¾” Mdf Membrane Press Doors W/ Liston; Paint Finish. 6.2. Provide Concealed Hinges And Handle For Cabinet Doors. 6.3. All Door Jamb Should Be 2’ X 6” Steel, Paint Finish. 7. Doors/hardwares 7.1. 1.0 M X 2.1 M X 41 Mm Thick Kiln Dry Solid Panel-type Door W/ Simulated Wood Grain Including 50 Mm X 150 Mm Solid Door Jamb W/ Simulated Wood Grain; Varnish Finish. For Classrooms (see Plans And Drawings). 7.2. 0.9 M X 1.2 M Flush Door W/ Jamb, For Common And Pwd Cr; Varnish Finish 7.3. 0.6 M X 1.60 M Aluminum (analok) Door W/ Handle, Hinges And Locksets For Cubicle In Toilets. 7.4. 0.8m X 2.1 M X 41 Mm Thick Kiln Dry Solid Panel-type Door W/ Simulated Wood Grain Including 50 Mm X 150 Mm Solid Door Jamb W/ Simulated Wood Grain; For Stockroom/electrical Room/beneath The Stairs; Varnish Finish. 7.5. Provide 1 Set Of Door Knob (yale Or Approved Equal) And 4 Pcs Of 3-1/2” Hinges (loose Pin Stanley Or Approved Equal) Each Panel-type Door. 8. Windows 8.1. 2.4 M X 1.2 M And 1.2 M X 1.2m Sliding Window 0.90m From Finísh Floor Line For Classrooms (see Plans And Drawings) 8.2. 0.5 M X 0.5 M And 0.6 M X 1.2 M Aluminum And Glass Awning Window Elevated 1.80m & 1.55m From Finísh Floor Line For Toilets. (see Plans And Drawings) 8.2. 1.2 M X 1.8 M Aluminum And Glass Awning & Fixed Type Window Elevated 0.35m From Finísh Floor Line For Ramps. (see Plans And Drawings) 8.3. All Windows Shall Have Grills Made Of 1” X 1” X 1.2 Mm Thick Galvanize Iron Square Tube Welded Except For Ramp Windows (see Plans And Drawings); Quick Drying Enamel Paint Finish. 8.4. All Aluminum Frames Shall Be Of The Best Quality, Analok Finish Free From Internal Defects. 8.5. All Glass Shall Be ¼” Thick Brown In Color, Unless Specify On Plan. 9. Tile Works 9.1. 60 Cm X 60 Cm Non-skid Tiles, Eurotiles Or Approved Equal, For Flooring At All Floors And 60 Cm X 60 Cm Unglazed For Hallways (submit Sample For Approval). 9.2. 30 Cm X 30 Cm Unglazed Tiles, Eurotiles Or Approved Equal For Landing,thread,and Riser In All Stairs. (submit Sample For Approval). 9.3. 30 Cm X 30 Cm Unglazed Tiles, Eurotiles Or Approved Equal, For Walls Of Toilets And Cubicles. (submit Sample For Approval). 9.4. 60 Cm X 60 Cm Doublé Polish Glazed Tiles, Eurotiles Or Approved Equal For Countertops For Sink And Lavatories. (submit Sample For Approval). 9.5. Provide Tile Grout For Tile Joints. 9.6. Provide 2 Coats Of Wáter Proofing Before Laying Of Floor Tiles In All Toilets In The Second Floor-fourth Floor. 10. Sanitary Work/ Fittings & Fixtures 10.1. Fittings & Fixtures 10.1.1. Wáter Closet - Closed-coupled Wáter Closet Dual Flush By Pozzi Or Approved Equal W/ Complete Fittings And Accessories. (submit Sample For Approval). 10.1.2. Lavatory - Basin-type Counter Lavatory By Pozzi Or Approved Equal W/ Complete Fittings And Accessories. (submit Sample For Approval). 10.1.3. Lavatory Faucet - Basin Mixer W/ Complete Accessories By Hcg Or Approved Equal And Hose Bibb For Every Wáter Closet. (submit Sample For Approval). 10.1.4. Urinal - Wash Down/ Gravity-flushing By Hcg Or Approved Equal W/ Complete Fittings And Accessories. (submit Sample For Approval) 10.1.5. Soap Holder – By Pozzi Or Approved Equal. 10.1.6. Tissue Holder – By Pozzi Or Approved Equal. 10.1.7. Floor Drain – 4” X 4” Stainless Steel Floor Drain. 10.2. 25 Mm And 20 Mm Polypropylene Random (ppr) Pipes And Ppr Fittings For Wáter Supply Lines/ Cold Wáter Lines. (as Per Plan). 10.3. 100mm (4”) And 50 Mm (2”) Diameter Unplasticized Polyvinyl Chloride (upvc) Sanitary Pipes And Fittings (neltex Orange Series 1000). (as Per Plan). 10.4. One (1) Septic Tank (as Per Plan) 10.5. Drainage System And Catch Basins (as Per Plan) 10.6. Provide P-trap To All Floor Drains And Sink. 11. Painting Works Materials Brand – Boysen Or Approved Equal. 11.1. For Interior/exterior Concrete Plaster: Pre-treatment : Concrete Neutralizer. Test With Litmus Or Ph Paper First Coat : Water-based Epoxy Primer (for Badly Weathered Concrete Or When Long Lasting Durability Is Desired) Patchwork : Patch-eeze Patching Compound. Note: Patchwork Should Be Followed With One Coat Of Concrete Primer As Primer-surfacer To Reduce Unsightly Uneven Appearance After Topcoat Application. Second Coat : Two (2) Coats Of Semi-gloss Latex. 12.2. For Interior Ceilings: First Coat : Interior Primer And Sealer Patchwork : Skim Coat Second Coat : Two (2) Coats Of Flat Latex 12.3. For Interior Woodworks And Doors: First Coat : Wood Putty Second Coat : Two (2) Coats Of Quick Drying Enamel. 12. Electrical Works 12.1. Wires / Conductors 12.1.1. Power Line - Insulated Copper Wire For 600v Level, Thw For Main Feeder And Tw For Load Side, Sycwin, Philflex Or Approved Equal. 12.2. Conduits 12.2.1. Service Entrance – Rigid Steel Consduit (rsc), Galvanized Iron Schedule 40. 12.2.2. Internal & Embedded – Pvc Pipes By Powerguard Or Approved Equal 12.3. Fixtures & Devices 12.3.1. Utility Box – 2” X 4” Poly Or Approved Equal. 12.3.2. Junction Box – 4” X 4” W/ Cover Poly Or Approved Equal. 12.3.3. Switches – 2” X 4” Switch Set By Panasonic Or Approved Equal (1 Gang/2 Gang/3 Gang) See Plans And Drawings. 12.3.4. Outlets – 2” X 4” Dúplex Convenience Outlet Set By Panasonic Or Approved Equal. 12.3.5. Panel Board – Ga. # 16 Metal Enclosure With Copper Bus Bar, Dead Front, Flush Mounted, Nema Brand Or Approved Equal. 12.3.6. Circuit Breaker – Molded Case Polyester Resin, Bolt Ton Type Thermal Magnetic Type, Common Internal Trip, 250v Ac, 10kaic Mínimum, General Electric Or Approved Equal (ampere Rating As Specified On Plans). 12.3.7. Grounding System – 16 Mm Dia. X 3000mm Hot Dipped Galvanized Steel Ground Rod. 12.4. Lighting Fixtures 12.4.1. Louver 4x20 With 20 Watts Luminaire Led T8 Light W/ Aluminum Reflector (surface Type). 15.4.2. 6” Dia. Receptacle W/ 16 Watts Led Bulb Firefly Or Approved Equal. 13. Concrete Works 14.1. Class A Mixture (1 Part Portland Cement, 2 Part Sand, And 4 Part Gravel) For Slabs In 2nd Floor And Landings, Stairs, Columns, Beams, Lintel Beams, Tie Beams, Column Footings, Wall Footings, Canopy And Septic Tank. 14.2. Class B Mixture (1 Part Portland Cement, 2-1/2 Part Sand, And 5 Part Gravel) For Slabs In Ground Floor And All Other Concrete Not Mention In 14.1. 14.3. Cement Plaster Must Be 1 Part Portland Cement, And 3 Part Sand. 14. Miscellaneous 14.1. Provide ¼” Thick X 4 Ft. High Mirror Glass For Wall Of All Toilets Covering The Entire Length Of Countertops Of Lavatory. 14.2. Provide Peebles Stone Or Waffle Tiles For All Ramp-up And Exterior Steps/stairs Covering The Thread And Riser. 14.3. Stairs And Pwd Ramp-up - Provide 2” Ø X 1.5 Mm Thick Stainless Tube (mirror Type Sus 304) For Stairs Handrail And Main Post; 1-1/2” Ø X 1.5 Mm Thick Stainless Tube For Vertical Members; 1” Ø X 1.5 Mm Thick Stainless Tube For Horizontal Members. Buffing Finish. 14.4. Corridor Railing – Provide 2” Ø Pipe For Handrail; All Joints Must Be Welded Together. Paint Finish. 14.5. Provide 4 Ceiling Fan 16” (asahi Or Approved Equal) Each Classroom. 14.6. Provide 2 Sets Of 4’ X 8’ White Board W/ Aluminum Frame Each Classroom. 14.7. Provide 35 Sets Of Arm Chair (monoblock) Each Classroom. 14.8. Provide Teacher’s Table & Chair Each Classroom. 14.9. Provide Fire Extinguisher 10lbs For Each Classroom. 14.10. Provide Emergency Light For Each Classroom. 14.11. Provide Emergency Fire Alarm For Every Floor. 14.12. Provide Exhaust Fan 12” At Each Toilet. Provide Also Manhole Cover At Each Toilet And Storage Room On Both Floors. 14.13. Provide 4-ibc (intermediate Bulk Container) Tanks For Rainwater Catchment (1000 L Capacity Each), 2- Elevated Wáter Tank (1000 L Capacity Each) (install Horizontal) With Booster Pump 1.5hp. 14.14. Provide Also Pvc Accordion Type Partition At 2ndfloor. 14.15. Provide 10mm Roof Insulation Double-sided At Roofing. 14.16. Provide (2) Sets Of Split Type Airconditioning Unit 2hp – Supply And Install Section Vii. Drawings                                       Section Viii. Bill Of Quantities Notes On The Bill Of Quantities Objectives The Objectives Of The Bill Of Quantities Are: A. To Provide Sufficient Information On The Quantities Of Works To Be Performed To Enable Bids To Be Prepared Efficiently And Accurately; And B. When A Contract Has Been Entered Into, To Provide A Priced Bill Of Quantities For Use In The Periodic Valuation Of Works Executed. In Order To Attain These Objectives, Works Should Be Itemized In The Bill Of Quantities In Sufficient Detail To Distinguish Between The Different Classes Of Works, Or Between Works Of The Same Nature Carried Out In Different Locations Or In Other Circumstances Which May Give Rise To Different Considerations Of Cost. Consistent With These Requirements, The Layout And Content Of The Bill Of Quantities Should Be As Simple And Brief As Possible. Daywork Schedule A Daywork Schedule Should Be Included Only If The Probability Of Unforeseen Work, Outside The Items Included In The Bill Of Quantities, Is High. To Facilitate Checking By The Entity Of The Realism Of Rates Quoted By The Bidders, The Daywork Schedule Should Normally Comprise The Following: A. A List Of The Various Classes Of Labor, Materials, And Constructional Plant For Which Basic Daywork Rates Or Prices Are To Be Inserted By The Bidder, Together With A Statement Of The Conditions Under Which The Contractor Will Be Paid For Work Executed On A Daywork Basis. B. Nominal Quantities For Each Item Of Daywork, To Be Priced By Each Bidder At Daywork Rates As Bid. The Rate To Be Entered By The Bidder Against Each Basic Daywork Item Should Include The Contractor’s Profit, Overheads, Supervision, And Other Charges. Provisional Sums A General Provision For Physical Contingencies (quantity Overruns) May Be Made By Including A Provisional Sum In The Summary Bill Of Quantities. Similarly, A Contingency Allowance For Possible Price Increases Should Be Provided As A Provisional Sum In The Summary Bill Of Quantities. The Inclusion Of Such Provisional Sums Often Facilitates Budgetary Approval By Avoiding The Need To Request Periodic Supplementary Approvals As The Future Need Arises. Where Such Provisional Sums Or Contingency Allowances Are Used, The Scc Should State The Manner In Which They Will Be Used, And Under Whose Authority (usually The Procuring Entity’s Representative’s). The Estimated Cost Of Specialized Work To Be Carried Out, Or Of Special Goods To Be Supplied, By Other Contractors Should Be Indicated In The Relevant Part Of The Bill Of Quantities As A Particular Provisional Sum With An Appropriate Brief Description. A Separate Procurement Procedure Is Normally Carried Out By The Procuring Entity To Select Such Specialized Contractors. To Provide An Element Of Competition Among The Bidders In Respect Of Any Facilities, Amenities, Attendance, Etc., To Be Provided By The Successful Bidder As Prime Contractor For The Use And Convenience Of The Specialist Contractors, Each Related Provisional Sum Should Be Followed By An Item In The Bill Of Quantities Inviting The Bidder To Quote A Sum For Such Amenities, Facilities, Attendance, Etc. Signature Box A Signature Box Shall Be Added At The Bottom Of Each Page Of The Bill Of Quantities Where The Authorized Representative Of The Bidder Shall Affix His Signature. Failure Of The Authorized Representative To Sign Each And Every Page Of The Bill Of Quantities Shall Be A Cause For Rejection Of His Bid. These Notes For Preparing A Bill Of Quantities Are Intended Only As Information For The Procuring Entity Or The Person Drafting The Bidding Documents. They Should Not Be Included In The Final Documents. Bill Of Quantities Item Description Unit Qty Unit Cost Amount I. Design And Permit A. Detailed Engineering And Architectural Design Lot 1.00 250,000.00 250,000.00 B. Permits, Insurance And Bonds Lot 1.00 Ii. General Requirements A. Mobilization/demobilization Lot 1.00 B. Temporary Facilities Lot 1.00 C. Safety And Health Requirements Lot 1.00 Ii. Earth Works A. Staking And Layout Lot 1.00 B. Excavation Works Cu.m 242.43 C. Backfilling Works Cu.m 170.90 D. Gravel Bedding Cu.m 35.75 E. Soil Poisoning Lot 1.00 F. Disposal And Hauling Of Materials Lot 1.00 Iii. Structural/civil Works A. Concrete Works Structural Concrete Cu.m 369.38 Reinforcing Steel Including Ties Kgs 38,213.68 Formworks And Scaffoldings Sq.m 2,755.79 B. Roof Framing Works Lot 1.00 Iv. Architectural Works A. Masonry Works Sq.m 1,820.07 B. Ceiling Works Sq.m 650.00 C. Floor Finishes Sq.m 1,073.16 D. Wall Finishes Sq.m 1,820.07 E. Doors And Windows 1000x2100 Solid Wood (tanguile) Panel Door With 50x150mm Steel Jamb; Complete With Hardware And Accessories Keyed Entry Door Knob; Varnish Finish Sets 16.00 900x2100 Solid Wood (tanguile) Panel Door With Stainless Steel Kick Plate On 50x150mm Steel Jamb; Complete With Hardware And Accessories Keyed Entry Door Knob; Varnish Finish Sets 2.00 900x2100 Solid Wood (tanguile) Panel Door With 50x150mm Steel Jamb; Complete With Hardware And Accessories Keyed Entry Door Knob; Varnish Finish Sets 4.00 800x1200 Aluminum Panel Door On 50x150mm Steel Jamb; Complete With Hardware And Accessories Latch Lock Sets 14.00 800x2100 Solid Wood (tanguile) Panel Door 50x150mm Steel Jamb; Complete With Hardware And Accessories Keyed Entry Door Knob; Varnish Finish Sets 6.00 2400x1200 6mm Clear Ordinary Glasss On Powder Coated Aluminum Framed Sliding Type Window With 1"x1" Tubular Spaced @4in Window Grills Steel; Provide With Complete Hardware Accessories Sets 16.00 1150x1200 6mm Clear Ordinary Glasss On Powder Coated Aluminum Framed Sliding Type Window With 1"x1" Tubular Spaced @4in Window Grills Steel; Provide With Complete Hardware Accessories Sets 16.00 1200x1800 6mm Thk Tempered Glass On Powder Coated Aluminum Frame Fixed & Awning Type Window; Provide With Complete Hardware Accessories Sets 3.00 600x1600 6mm Clear Ordinary Glasss On Powder Coated Aluminum Framed Awning Type Window With 1"x1" Tubular Spaced @4in Window Grills Steel; Provide With Complete Hardware Accessories Sets 4.00 500x500 6mm Clear Ordinary Glasss On Powder Coated Aluminum Framed Awning Type Window With 1"x1" Tubular Spaced @4in Window Grills Steel; Provide With Complete Hardware Accessories Sets 2.00 F. Thermal & Moisture Protection Lot 1.00 G. Railings Lot 1.00 H. Tinsmithry Works Lot 1.00 Including Pe Insulation 10mm X Double Sided I. Miscellaneous Emergency Light. Twinhead Sets 12.00 White Board, 4'x8' With Eraser Sets 16.00 Teacher's Tables, Wooden With Cabinet Sets 8.00 Teacher's Chair Sets 8.00 Student Arm Chair, Plastic Sets 280.00 V. Electrical Works A. Roughing Ins Lot 1.00 B. Wires And Cables Lot 1.00 C. Lighting Fixtures Lot 1.00 D. Wiring Devices Lot 1.00 Vi. Mechanical Works Fire Extinguisher 10lbs Set 8.00 Fire Alarm Set 2.00 Exhaust Fan Set 6.00 Split-type Aircon, 2hp Set 2.00 Ceiling Fan Set 32.00 Consumables Lot 1.00 Folding Partition (pvc Accordion) Lot 1.00 Lavatory Counter Cabinets Lot 1.00 Viii. Plumbing Works A. Plumbing Fixtures Water Closet With Accessories (tank Type) Set 16.00 Urinal (with Privacy Partition) Set 8.00 Bidet Spray Set 16.00 Counter Lavatory With Granite And Accessories Set 18.00 Mirror Set 4.00 Lavatory Faucet Pcs 18.00 Hose Bibb Faucet Pcs 16.00 Tissue Paper Holder Pcs 16.00 Floor Drain Pcs 20.00 B. Sewer Line And Vent System Lot 1.00 C. Waterline System Lot 1.00 D. Storm Drainage System Lot 1.00 E. Others (tank) Ibc Tanks (1000l) - Rainwater Catchment Set 4.00 Water Tank - 1000l Set 2.00 Booster Pump, 1.5hp Set 1.00 Septic Tank Lot 1.00 Grand Total Cost (inclusive Of Ocm, Profit And Vat) I Hereby Certify To Comply With All The Above Technical Specifications As Per Prices Quoted In The Bill Of Quantities. Name Of Company/bidder Signature Over Printed Name Of Date Representatives Section Ix. Checklist Of Technical And Financial Documents Notes On The Checklist Of Technical And Financial Documents The Prescribed Documents In The Checklist Are Mandatory To Be Submitted In The Bid, But Shall Be Subject To The Following: A. Gppb Resolution No. 09-2020 On The Efficient Procurement Measures During A State Of Calamity Or Other Similar Issuances That Shall Allow The Use Of Alternate Documents In Lieu Of The Mandated Requirements; Or B. Any Subsequent Gppb Issuances Adjusting The Documentary Requirements After The Effectivity Of The Adoption Of The Pbds. The Bac Shall Be Checking The Submitted Documents Of Each Bidder Against This Checklist To Ascertain If They Are All Present, Using A Non-discretionary “pass/fail” Criterion Pursuant To Section 30 Of The 2016 Revised Irr Of Ra No. 9184. Checklist Of Technical And Financial Documents I. Technical Component Envelope Class “a” Documents Legal Documents ⬜ (a) Valid Philgeps Registration Certificate (platinum Membership) (all Pages); Or ⬜ (b) Registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document; And ⬜ (c) Mayor’s Or Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidder Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And ⬜ (e) Tax Clearance Per E.o. No. 398, S. 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). Technical Documents ⬜ (f) Statement Of The Prospective Bidder Of All Its Ongoing Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contract To Be Bid; And ⬜ (g) Statement Of The Bidder’s Single Largest Completed Contract (slcc) Similar To The Contract To Be Bid, Except Under Conditions Provided Under The Rules; And ⬜ (h) Philippine Contractors Accreditation Board (pcab) License; Or Special Pcab License In Case Of Joint Ventures; And Registration For The Type And Cost Of The Contract To Be Bid; And ⬜ (i) Original Copy Of Bid Security. If In The Form Of A Surety Bond, Submit Also A Certification Issued By The Insurance Commission; Or Original Copy Of Notarized Bid Securing Declaration; And (j) Project Requirements, Which Shall Include The Following: ⬜ A. Organizational Chart For The Contract To Be Bid; ⬜ B. List Of Contractor’s Key Personnel (e.g., Project Manager, Project Engineers, Materials Engineers, And Foremen), To Be Assigned To The Contract To Be Bid, With Their Complete Qualification And Experience Data; ⬜ C. List Of Contractor’s Major Equipment Units, Which Are Owned, Leased, And/or Under Purchase Agreements, Supported By Proof Of Ownership Or Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project, As The Case May Be; And ⬜ (k) Original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation, Partnership, Or Cooperative; Or Original Special Power Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. Financial Documents ⬜ (l) The Prospective Bidder’s Audited Financial Statements, Showing, Among Others, The Prospective Bidder’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And ⬜ (m) The Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc). Class “b” Documents ⬜ (n) If Applicable, Duly Signed Joint Venture Agreement (jva) In Accordance With Ra No. 4566 And Its Irr In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. Ii. Financial Component Envelope ⬜ (o) Original Of Duly Signed And Accomplished Financial Bid Form; And Other Documentary Requirements Under Ra No. 9184 ⬜ (p) Original Of Duly Signed Bid Prices In The Bill Of Quantities; And ⬜ (q) Duly Accomplished Detailed Estimates Form, Including A Summary Sheet Indicating The Unit Prices Of Construction Materials, Labor Rates, And Equipment Rentals Used In Coming Up With The Bid; And ⬜ (r) Cash Flow By Quarter. Bid Form For The Procurement Of Infrastructure Projects [shall Be Submitted With The Bid] _________________________________________________________________________ Bid Form Date : _________________ Project Identification No. : _________________ To: [name And Address Of Procuring Entity] Having Examined The Philippine Bidding Documents (pbds) Including The Supplemental Or Bid Bulletin Numbers [insert Numbers], The Receipt Of Which Is Hereby Duly Acknowledged, We, The Undersigned, Declare That: A. We Have No Reservation To The Pbds, Including The Supplemental Or Bid Bulletins, For The Procurement Project: [insert Name Of Contract]; B. We Offer To Execute The Works For This Contract In Accordance With The Pbds; C. The Total Price Of Our Bid In Words And Figures, Excluding Any Discounts Offered Below Is: [insert Information]; D. The Discounts Offered And The Methodology For Their Application Are: [insert Information]; E. The Total Bid Price Includes The Cost Of All Taxes, Such As, But Not Limited To: [specify The Applicable Taxes, E.g. (i) Value Added Tax (vat), (ii) Income Tax, (iii) Local Taxes, And (iv) Other Fiscal Levies And Duties], Which Are Itemized Herein And Reflected In The Detailed Estimates, F. Our Bid Shall Be Valid Within The A Period Stated In The Pbds, And It Shall Remain Binding Upon Us At Any Time Before The Expiration Of That Period; G. If Our Bid Is Accepted, We Commit To Obtain A Performance Security In The Amount Of [insert Percentage Amount] Percent Of The Contract Price For The Due Performance Of The Contract, Or A Performance Securing Declaration In Lieu Of The The Allowable Forms Of Performance Security, Subject To The Terms And Conditions Of Issued Gppb Guidelines For This Purpose; H. We Are Not Participating, As Bidders, In More Than One Bid In This Bidding Process, Other Than Alternative Offers In Accordance With The Bidding Documents; I. We Understand That This Bid, Together With Your Written Acceptance Thereof Included In Your Notification Of Award, Shall Constitute A Binding Contract Between Us, Until A Formal Contract Is Prepared And Executed; And J. We Understand That You Are Not Bound To Accept The Lowest Calculated Bid Or Any Other Bid That You May Receive. K. We Likewise Certify/confirm That The Undersigned, Is The Duly Authorized Representative Of The Bidder, And Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For The [name Of Project] Of The [name Of The Procuring Entity]. L. We Acknowledge That Failure To Sign Each And Every Page Of This Bid Form, Including The Bill Of Quantities, Shall Be A Ground For The Rejection Of Our Bid. Name: ___________________________________________________________________ Legal Capacity: ____________________________________________________________ Signature: ________________________________________________________________ Duly Authorized To Sign The Bid For And Behalf Of: __________________________________ Date: ___________________ [bidder’s Letterhead] Name Of The Procuring Entity : Bulacan Agricultural State College Project: 2024-01-infra: Construction Of 2-storey Agroforestry Building With Rainwater Catchment Facility Location Of The Project : Doña Remedios Trinidad, Bulacan List Of All Ongoing Government & Private Contracts Including Contracts Awarded But Not Yet Started Business Name : Business Address :______________________________________________________________________ Name Of Contract/ Project Cost A. Owner’s Name B. Address C. Telephone Nos. Nature Of Work Bidder’s Role A. Date Awarded B. Date Started C. Date Of Completion % Of Accomplishment Value Of Outstanding Works / Undelivered Portion Description % Planned Actual Government Private Note: This Statement Shall Be Supported With: Total Cost 1 Notice Of Award (for Government Projects) 2 Notice To Proceed (for Government Projects) 3 Contract Submitted By : (printed Name & Signature) Designation : Date : [bidder’s Letterhead] Name Of The Procuring Entity : Bulacan Agricultural State College Project: 2024-01-infra: Construction Of 2-storey Agroforestry Building With Rainwater Catchment Facility Location Of The Project : Doña Remedios Trinidad, Bulacan Statement Of Single Largest Completed Contracts (slcc) In The Last Five (5) Years Business Name : Business Address : Name Of Contract A. Owner Name B. Address C. Telephone Nos. Nature Of Work Contractor’s Role A. Amount At Award B. Amount At Completion C. Duration A. Date Awarded B. Contract Effectivity C. Date Completed Description % Government Private Attached Herewith Are The Following Documents: Contract Agreement, Notice Of Award, Notice To Proceed, Official Receipt/invoice, Certificate Of Final Inspection, And Certificate Of Acceptance, As Evidences In Support Of The Foregoing Information, Certificate Of Good Performance Submitted By : (printed Name & Signature) Designation : ____________________________________________ Contract Agreement Form This Agreement Made The _____ Day Of __________ 20_____ Between [name Of Procuring Entity] Of The Philippines (hereinafter Called “the Entity”) Of The One Part And [name Of Supplier] Of [city And Country Of Supplier] (hereinafter Called “the Supplier”) Of The Other Part: Whereas The Entity Invited Bids For Certain Goods And Ancillary Services, Viz., [brief Description Of Goods And Services] And Has Accepted A Bid By The Supplier For The Supply Of Those Goods And Services In The Sum Of [contract Price In Words And Figures] (hereinafter Called “the Contract Price”). Now This Agreement Witnesseth As Follows: 1. In This Agreement Words And Expressions Shall Have The Same Meanings As Are Respectively Assigned To Them In The Conditions Of Contract Referred To. 2. The Following Documents Shall Be Deemed To Form And Be Read And Construed As Part Of This Agreement, Viz.: (a) The Supplier’s Bid, Including The Technical And Financial Proposals, And All Other Documents/statements Submitted (e.g. Bidder’s Response To Clarifications On The Bid), Including Corrections To The Bid Resulting From The Procuring Entity’s Bid Evaluation; (b) The Schedule Of Requirements; (c) The Technical Specifications; (d) The General Conditions Of Contract; (e) The Special Conditions Of Contract; (f) The Performance Security; And (g) The Entity’s Notice Of Award. 3. In Consideration Of The Payments To Be Made By The Entity To The Supplier As Hereinafter Mentioned, The Supplier Hereby Covenants With The Entity To Provide The Goods And Services And To Remedy Defects Therein In Conformity In All Respects With The Provisions Of The Contract 4. The Entity Hereby Covenants To Pay The Supplier In Consideration Of The Provision Of The Goods And Services And The Remedying Of Defects Therein, The Contract Price Or Such Other Sum As May Become Payable Under The Provisions Of The Contract At The Time And In The Manner Prescribed By The Contract. In Witness Whereof The Parties Hereto Have Caused This Agreement To Be Executed In Accordance With The Laws Of The Republic Of The Philippines On The Day And Year First Above Written. Signed, Sealed, Delivered By The (for The Entity) Signed, Sealed, Delivered By The (for The Supplier) Omnibus Sworn Statement (revised) [shall Be Submitted With The Bid] _________________________________________________________________________ Republic Of The Philippines ) City/municipality Of ______ ) S.s. Affidavit I, [name Of Affiant], Of Legal Age, [civil Status], [nationality], And Residing At [address Of Affiant], After Having Been Duly Sworn In Accordance With Law, Do Hereby Depose And State That: 1. [select One, Delete The Other:] [if A Sole Proprietorship:] I Am The Sole Proprietor Or Authorized Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am The Duly Authorized And Designated Representative Of [name Of Bidder] With Office Address At [address Of Bidder]; 2. [select One, Delete The Other:] [if A Sole Proprietorship:] As The Owner And Sole Proprietor, Or Authorized Representative Of [name Of Bidder], I Have Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached Duly Notarized Special Power Of Attorney; [if A Partnership, Corporation, Cooperative, Or Joint Venture:] I Am Granted Full Power And Authority To Do, Execute And Perform Any And All Acts Necessary To Participate, Submit The Bid, And To Sign And Execute The Ensuing Contract For [name Of The Project] Of The [name Of The Procuring Entity], As Shown In The Attached [state Title Of Attached Document Showing Proof Of Authorization (e.g., Duly Notarized Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney, Whichever Is Applicable;)]; 3. [name Of Bidder] Is Not “blacklisted” Or Barred From Bidding By The Government Of The Philippines Or Any Of Its Agencies, Offices, Corporations, Or Local Government Units, Foreign Government/foreign Or International Financing Institution Whose Blacklisting Rules Have Been Recognized By The Government Procurement Policy Board, By Itself Or By Relation, Membership, Association, Affiliation, Or Controlling Interest With Another Blacklisted Person Or Entity As Defined And Provided For In The Uniform Guidelines On Blacklisting; 4. Each Of The Documents Submitted In Satisfaction Of The Bidding Requirements Is An Authentic Copy Of The Original, Complete, And All Statements And Information Provided Therein Are True And Correct; 5. [name Of Bidder] Is Authorizing The Head Of The Procuring Entity Or Its Duly Authorized Representative(s) To Verify All The Documents Submitted; 6. [select One, Delete The Rest:] [if A Sole Proprietorship:] The Owner Or Sole Proprietor Is Not Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Partnership Or Cooperative:] None Of The Officers And Members Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; [if A Corporation Or Joint Venture:] None Of The Officers, Directors, And Controlling Stockholders Of [name Of Bidder] Is Related To The Head Of The Procuring Entity, Members Of The Bids And Awards Committee (bac), The Technical Working Group, And The Bac Secretariat, The Head Of The Project Management Office Or The End-user Unit, And The Project Consultants By Consanguinity Or Affinity Up To The Third Civil Degree; 7. [name Of Bidder] Complies With Existing Labor Laws And Standards; And 8. [name Of Bidder] Is Aware Of And Has Undertaken The Responsibilities As A Bidder In Compliance With The Philippine Bidding Documents, Which Includes: A. Carefully Examining All Of The Bidding Documents; B. Acknowledging All Conditions, Local Or Otherwise, Affecting The Implementation Of The Contract; C. Making An Estimate Of The Facilities Available And Needed For The Contract To Be Bid, If Any; And D. Inquiring Or Securing Supplemental/bid Bulletin(s) Issued For The [name Of The Project]. 9. [name Of Bidder] Did Not Give Or Pay Directly Or Indirectly, Any Commission, Amount, Fee, Or Any Form Of Consideration, Pecuniary Or Otherwise, To Any Person Or Official, Personnel Or Representative Of The Government In Relation To Any Procurement Project Or Activity. 10. In Case Advance Payment Was Made Or Given, Failure To Perform Or Deliver Any Of The Obligations And Undertakings In The Contract Shall Be Sufficient Grounds To Constitute Criminal Liability For Swindling (estafa) Or The Commission Of Fraud With Unfaithfulness Or Abuse Of Confidence Through Misappropriating Or Converting Any Payment Received By A Person Or Entity Under An Obligation Involving The Duty To Deliver Certain Goods Or Services, To The Prejudice Of The Public And The Government Of The Philippines Pursuant To Article 315 Of Act No. 3815 S. 1930, As Amended, Or The Revised Penal Code. In Witness Whereof, I Have Hereunto Set My Hand This __ Day Of ___, 20__ At ____________, Philippines. [insert Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Affiant [jurat] [format Shall Be Based On The Latest Rules On Notarial Practice] Bid Securing Declaration Form [shall Be Submitted With The Bid If Bidder Opts To Provide This Form Of Bid Security] Republic Of The Philippines) City Of _______________________) S.s. Bid Securing Declaration Project Identification No.: [insert Number] To: [insert Name And Address Of The Procuring Entity] I/we, The Undersigned, Declare That: 1. I/we Understand That, According To Your Conditions, Bids Must Be Supported By A Bid Security, Which May Be In The Form Of A Bid Securing Declaration. 2. I/we Accept That: (a) I/we Will Be Automatically Disqualified From Bidding For Any Procurement Contract With Any Procuring Entity For A Period Of Two (2) Years Upon Receipt Of Your Blacklisting Order; And, (b) I/we Will Pay The Applicable Fine Provided Under Section 6 Of The Guidelines On The Use Of Bid Securing Declaration, Within Fifteen (15) Days From Receipt Of The Written Demand By The Procuring Entity For The Commission Of Acts Resulting To The Enforcement Of The Bid Securing Declaration Under Sections 23.1(b), 34.2, 40.1 And 69.1, Except 69.1(f),of The Irr Of Ra No. 9184; Without Prejudice To Other Legal Action The Government May Undertake. 3. I/we Understand That This Bid Securing Declaration Shall Cease To Be Valid On The Following Circumstances: A. Upon Expiration Of The Bid Validity Period, Or Any Extension Thereof Pursuant To Your Request; B. I Am/we Are Declared Ineligible Or Post-disqualified Upon Receipt Of Your Notice To Such Effect, And (i) I/we Failed To Timely File A Request For Reconsideration Or (ii) I/we Filed A Waiver To Avail Of Said Right; And C. I Am/we Are Declared The Bidder With The Lowest Calculated Responsive Bid, And I/we Have Furnished The Performance Security And Signed The Contract. In Witness Whereof, I/we Have Hereunto Set My/our Hand/s This ____ Day Of [month] [year] At [place Of Execution]. [[insert Name Of Bidder Or Its Authorized Representative] [insert Signatory’s Legal Capacity] Affiant [jurat] [format Shall Be Based On The Latest Rules On Notarial Practice] Net Financial Contracting Capacity Year 20 1 Total Assets 2 Current Assets 3 Total Liabilities 4 Current Liabilities 5 Net Worth (1-3) 6 Net Working Capital (2-4) The Net Financial Contracting Capacity (nfcc) Based On The Above Data Is Computed As Follows: Nfcc = [(current Assets – Current Liabilities) (15)] Minus Value Of All Outstanding Or Uncompleted Portions Of The Projects Under Ongoing Contracts Including Awarded Contracts Yet To Be Started Coinciding With The Contract To Be Bid. The Values Of The Domestic Bidder’s Current Assets And Current Liabilities Shall Be Based On The Latest Audited Financial Statements Submitted To The Bir. Nfcc = Php Submitted By: Name Of Bidder Signature Of Authorized Representative Over Printed Name Date: _______________________________________