Apayao State College Tender

Description 1 Universal Testing Machine Stand Alone Power And Control Console For The Control Of Up To 2 (expandable To 4) Testing Frames. Pc Included; 230 V; 50-60 Hz, 1 Ph Description: Automatic Computerized Control Console For Concrete, Cement And Steel Rebar Testing, Allowing Modular Upgrades From Basic Failure Tests To Advanced Displacement-controlled Tests For Fiber Reinforced Concrete Characterization. Its Versatility Allows To Connect Up To Four Testing Frames, From 15kn To 5000kn, In Compression And 500kn In Tension With The Capability To Test Any Kind Of Material And Sample Dimensions. Hydraulics: Dual Stage Hpu: Centrifugal Low Pressure For Fast Approach With Automatic Switching To Radialmulti-piston High Pressure For Loading Dc Motor: 720 W, 50-60 Hz Maximum Working Pressure: 700 Bar Third And Fourth Frame Option, Active Frame Selection By Software Flow-sharing Technology To Perform Loading And Unloading Cycles Energy Saving Technology To Reduce Power Consumption And Silent Operation Hardware: 131,000 Points Effective Resolution High Frequency Closed-loop: P.i.d. Control Control Frequency: 1 Khz Sampling Rate: 250 Hz4 Channels For Load Sensors (pressure Transducers And Load Cells) 6 Channels To Measure Strain Values With Transducers (lvdt, Magneto Strictive, Potentiometric) 4 Channels For Strain Measurement With Strain Gauges, Ldt, Clip Gauges Memorization Of The Calibration Curve Enables Sensors To Be Connected And Used Immediately Digital Linearization Of The Calibration Curve (multi-coefficient) Physical Specifications: Pc Included. 230 V, 50-60 Hz, 1 Ph Flexible Arm For Pc As Option Weight Approx.: 200g Accessories: Flexible Arm For Ultimate Compression Frame 1500kn Models Capacity, Kn 1500 Platens Dim. Mm Dia. 220 Surface Hardness 55 Hrcflatness Tolerance, Mm 0.03ram Travel Mm 50max. Vertical Daylight Mm 340*horizontal Daylight Mm 280 For Specimen Size: Cylinders Cm (dia.xh) 15 X 30 (6"x12"), 16x32 Cubes Cm 15overall Dim. (lxdxh) Mm 445x365x1090 Accessories Accessories-compression Machine, Compression Device To Test 50mm (2") Mortar, Cubes To Astm C109/ Tot Ht 195mm Machine Frames And Testing Distance Piece 200mm X 100mm Dia Complete Splitting Tensile Test Device For Cylindrical Specimens 100x200 Mm 4" X 8" 150x300 Mm 6" X 12” And 160x320 Mm [dia. X H] Cube Mold (briquette) 50mm X 50mm X 50 Mm -3 Gang (steel) Neoprene Pads 6-1/16" X 1/2" Shore 70 Capping Retainer 6-1/16" Diameter (pairs) Neoprene Pads 4-1/16" X 1/2" Shore 70 Capping Retainer 4-1/16" Diameter (pairs) Universal Testing Machine Stand Alone Power And Control Console For The Control Of Up To 2 (expandable To 4) Testing Frames. Pc Included; 230 V; 50-60 Hz, 1 Ph Description: Automatic Computerized Control Console For Concrete, Cement And Steel Rebar Testing, Allowing Modular Upgrades From Basic Failure Tests To Advanced Displacement-controlled Tests For Fiber Reinforced Concrete Characterization. Its Versatility Allows To Connect Up To Four Testing Frames, From 15kn To 5000kn, In Compression And 500kn In Tension With The Capability To Test Any Kind Of Material And Sample Dimensions. Hydraulics: Dual Stage Hpu: Centrifugal Low Pressure For Fast Approach With Automatic Switching To Radialmulti-piston High Pressure For Loading Dc Motor: 720 W, 50-60 Hz Maximum Working Pressure: 700 Bar Third And Fourth Frame Option, Active Frame Selection By Software Flow-sharing Technology To Perform Loading And Unloading Cycles Energy Saving Technology To Reduce Power Consumption And Silent Operation Hardware: 131,000 Points Effective Resolution High Frequency Closed-loop: P.i.d. Control Control Frequency: 1 Khz Sampling Rate: 250 Hz4 Channels For Load Sensors (pressure Transducers And Load Cells) 6 Channels To Measure Strain Values With Transducers (lvdt, Magneto Strictive, Potentiometric) 4 Channels For Strain Measurement With Strain Gauges, Ldt, Clip Gauges Memorization Of The Calibration Curve Enables Sensors To Be Connected And Used Immediately Digital Linearization Of The Calibration Curve (multi-coefficient) Physical Specifications: Pc Included. 230 V, 50-60 Hz, 1 Ph Flexible Arm For Pc As Option Weight Approx.: 200g Accessories: Flexible Arm For Ultimate Compression Frame 1500kn Models Capacity, Kn 1500 Platens Dim. Mm Dia. 220 Surface Hardness 55 Hrcflatness Tolerance, Mm 0.03ram Travel Mm 50max. Vertical Daylight Mm 340*horizontal Daylight Mm 280 For Specimen Size: Cylinders Cm (dia.xh) 15 X 30 (6"x12"), 16x32 Cubes Cm 15overall Dim. (lxdxh) Mm 445x365x1090 Accessories Accessories-compression Machine, Compression Device To Test 50mm (2") Mortar, Cubes To Astm C109/ Tot Ht 195mm Machine Frames And Testing Distance Piece 200mm X 100mm Dia Complete Splitting Tensile Test Device For Cylindrical Specimens 100x200 Mm 4" X 8" 150x300 Mm 6" X 12” And 160x320 Mm [dia. X H] Cube Mold (briquette) 50mm X 50mm X 50 Mm -3 Gang (steel) Neoprene Pads 6-1/16" X 1/2" Shore 70 Capping Retainer 6-1/16" Diameter (pairs) Neoprene Pads 4-1/16" X 1/2" Shore 70 Capping Retainer 4-1/16" Diameter (pairs) 1 Universal Testing Machine Stand Alone Power And Control Console For The Control Of Up To 2 (expandable To 4) Testing Frames. Pc Included; 230 V; 50-60 Hz, 1 Ph Description: Automatic Computerized Control Console For Concrete, Cement And Steel Rebar Testing, Allowing Modular Upgrades From Basic Failure Tests To Advanced Displacement-controlled Tests For Fiber Reinforced Concrete Characterization. Its Versatility Allows To Connect Up To Four Testing Frames, From 15kn To 5000kn, In Compression And 500kn In Tension With The Capability To Test Any Kind Of Material And Sample Dimensions. Hydraulics: Dual Stage Hpu: Centrifugal Low Pressure For Fast Approach With Automatic Switching To Radialmulti-piston High Pressure For Loading Dc Motor: 720 W, 50-60 Hz Maximum Working Pressure: 700 Bar Third And Fourth Frame Option, Active Frame Selection By Software Flow-sharing Technology To Perform Loading And Unloading Cycles Energy Saving Technology To Reduce Power Consumption And Silent Operation Hardware: 131,000 Points Effective Resolution High Frequency Closed-loop: P.i.d. Control Control Frequency: 1 Khz Sampling Rate: 250 Hz4 Channels For Load Sensors (pressure Transducers And Load Cells) 6 Channels To Measure Strain Values With Transducers (lvdt, Magneto Strictive, Potentiometric) 4 Channels For Strain Measurement With Strain Gauges, Ldt, Clip Gauges Memorization Of The Calibration Curve Enables Sensors To Be Connected And Used Immediately Digital Linearization Of The Calibration Curve (multi-coefficient) Physical Specifications: Pc Included. 230 V, 50-60 Hz, 1 Ph Flexible Arm For Pc As Option Weight Approx.: 200g Accessories: Flexible Arm For Ultimate Compression Frame 1500kn Models Capacity, Kn 1500 Platens Dim. Mm Dia. 220 Surface Hardness 55 Hrcflatness Tolerance, Mm 0.03ram Travel Mm 50max. Vertical Daylight Mm 340*horizontal Daylight Mm 280 For Specimen Size: Cylinders Cm (dia.xh) 15 X 30 (6"x12"), 16x32 Cubes Cm 15overall Dim. (lxdxh) Mm 445x365x1090 Accessories Accessories-compression Machine, Compression Device To Test 50mm (2") Mortar, Cubes To Astm C109/ Tot Ht 195mm Machine Frames And Testing Distance Piece 200mm X 100mm Dia Complete Splitting Tensile Test Device For Cylindrical Specimens 100x200 Mm 4" X 8" 150x300 Mm 6" X 12” And 160x320 Mm [dia. X H] Cube Mold (briquette) 50mm X 50mm X 50 Mm -3 Gang (steel) Neoprene Pads 6-1/16" X 1/2" Shore 70 Capping Retainer 6-1/16" Diameter (pairs) Neoprene Pads 4-1/16" X 1/2" Shore 70 Capping Retainer 4-1/16" Diameter (pairs) Set 1 2 Force Table Four Sets Of Slot-weight, Nickel Plated Brass, Each Comprising 2x5g, 4x10g And 4x20g Weight As Well As A 20g Weight Suspender Four Pulleys With Fastening Clips And Cords Box Level Set 2 3 Weight Holder Mass: 10g Tolerance: ± 1 % Diam. Rod: 4 Mm Diam. Slotted Weight: 28mm Piece 10 4 Free Fall Apparatus Height Scale 20 - 960 Mm; Scale Divisions: 10mm; Scale Precision: 0.2 Mm; Balls: Steel, 16 Mm Dia.; Diemensions: 200 X 130 X 1000 Mm³ Approx.; Weight: 1.6 Kg Approx. Unit 1 5 Metal Balls Of Different Sizes 5 Pack Of Steel Spheres Contain One Sphere Each Of 1/2" 5/8" 3/4" 7/8" 1" In Diameter Set 2 6 Inclined Plane Product Dimensions: 24.4 X 7.5 X 2.4 Inches 1 Unit 7 Friction Board With Pulley Complete With 100 X 100 Mm Friction Slider And Metal Roller. Board Dimensions: 600 X 100mm, Fitted With Arc 1 Unit 8 Three-wire Pattern Sonometer Product Dimensions: 24.4 X 7.5 X 2.4 Inches 1 Unit 9 Tuning Forks Of Three Different Frequencies Material: Aluminum Alloy; Color: Silver; Feature: Oem Service 2 Set 10 Connectors With Alligator Clip Connector Housing, Amp Rating: 45a Heavy Duty; Contact Amp Rating: 30a, 600v 6 Piece 11 Rheostats Diameter (english) Inside: 1.7 In. For Use With (application): Changing The Resistance Of The Circuit; Voltage: 0/1 V; Diameter (metric) Inside: 4.31 Cm 1 Unit 12 5 Cm Focal Length Concave Lens 30mm, 40mm, 50mm, 75mm Glass Double Convex Double Concave Lens; Focal Length 50mm, 75mm, 100mm, 150mm, 300mm Optics Diy Projector 3 Piece 13 10 Cm/7.5 Cm Focal Length Convex Lens Diameter 42mm; Focal Length 75mm Acrylic Pmma Plano Convex Lens Lenticular 4x Magnifying Magnifier Lens Vr Lens 3 Piece 14 5 Cm Focal Length Spherical Mirror Shape: Single-lens; Usage: Optical; Structure: Plano-convex; Color: Black; Material: Optical Glass 3 Piece 15 Optics Experiment Box Set Optical Bench Stainless Steel Physical Optical Teaching Equipment 1 Set 16 Optical Glass Prism Optical Experiment Set Triangular Prism Convex Lens Concave Mirror Dial Three-line Semiconductor Laser Light Source Physics 2 Set 17 Crossed Arrow Target 1x Optics Track, 1.2 M 1x Basic Optics Light Source 1x Accessory Lens Set 1x Adjustable Lens Holder 1x Ray Optics Kit 1x Basic Optics Viewing Screen 1x Basic Optics Ray Table 1x Concave/convex Mirror 1x Basic Optics Geometric Lens Set 1x Storage Box 1 Set 18 Specific Gravity Frame Accessories: Density Basket 200mm Dia X 200mm High Stainless Steel With 3.35mm Mesh Opening 1 Set 19 Scoop Round Aluminum Scoop 1000 Ml Cap. 2piece 20 Standard Sieves, 3" Br-ss Full Height 8" X 2" 1 Piece 21 Standard Sieves, 2-1/2" Br-ss Full Height 8" X 2" 1 Piece 22 Standard Sieves, 2" Br-ss Full Height 8" X 2" 1 Piece 23 Standard Sieves, 1-1/2" Br-ss Full Height 8" X 2" 1 Piece 24 Standard Sieves, 1" Br-ss Full Height 8" X 2" 1 Piece 25 Standard Sieves, 3/4" Br-ss Full Height 8" X 2" 1 Piece 26 Standard Sieves, 1/2" Br-ss Full Height 8" X 2" 1 Piece 27 Standard Sieves, 3/8" Br-ss Full Height 8" X 2" 1 Piece 28 Standard Sieves, No.4 Br-ss Full Height 8" X 2" 1 Piece 29 Standard Sieves, No.8 Br-ss Full Height 8" X 2" 1 Piece 30 Standard Sieves, No.10 Br-ss Full Height 8" X 2" 1 Piece 31 Standard Sieves, No.16 Br-ss Full Height 8" X 2" 1 Piece 32 Standard Sieves, No.30 Br-ss Full Height 8" X 2" 1 Piece 33 Standard Sieves, No.40 Br-ss Full Height 8" X 2" 1 Piece 34 Standard Sieves, No.100 Br-ss Full Height 8" X 2" 1 Piece 35 Pan & Cover Of Standard Sieves Br-ss Full Height 8" X 2" 1 Piece 36 Liquid Limit Device, Hand Operated With Grooving Tool 2 Set 37 Hammer, Modified Compaction 2 Piece 38 Mold, Compaction, 6" Dia. X 116.4 Mm High 2 Piece 39 Equal-arm Balance 100g/0.02g Capacity: 100g Readability: 0.02g Wooden Support Includes Set Of Weights On Wooden Support: 1 Weight Of 50 G 1 Weight Of 20 G 2 Weights Of 10 G 1 Weights Of 105 G 2 Weights Of 2 G 1 Weights Of 1 G Dimensions: 245*200*68 Mm 1 Set 40 Pulley Demonstration Set Pulleys - (8) Single; (2) Double Sheaves, Eisco Ball Bearing Frictionless Pulleys Wooden Base 20 X 15 Cm Fitted With One Vertical Rod Of Size 61 Cm X 12.5 Mm And One Horizontal Rod Size Of 20 Cm X 9.5 Mm With Clamp Collars With Hook – 6 Right Angled Clamp - 1 Wheel And Axle – 1 Cord - 2 Rolls Tommy Bar To Tighten Vertical Rods-1 Hooked Masses Brass, With Hooks. 1 X 10g, 2 X 20g, 1 X 100g, 2 X 200g, 1 X 500g, 1 X 1000g - Total 9 Weights 1 Set 41 Glass Volumetric Lab Flasks, 500 Ml Includes Fitted Snap Cap Optimal For Specific Gravity Testing Compliant With Astm E288 And E694 2 Piece 42 Curing Tank Stainless Steel Made Curing Tank Temperature Range: Ambient To +40°c Wattage: 3000 W Capacity: 1000 Liters Internal Dimensions: 1500x900x800mm Weight Approx: 130 Kg 1 Unit