Aerospace And Defence Tenders
Aerospace And Defence Tenders
DEPT OF THE ARMY USA Tender
Aerospace and Defence
Corrigendum : Closing Date Modified
United States
Control Assembly, Gun; Nsn: 1090-01-385-5420
Closing Date21 Feb 2025
Tender AmountRefer Documents
DEFENSE LOGISTICS AGENCY USA Tender
Machinery and Tools...+1Aerospace and Defence
United States
Description: There Is No Solicitation Available At This Time. Request For A Solicitation Will Not Receive A Response. This Sources Sought Synopsis (sss) Is In Support Of Market Research Being Conducted By The Defense Logistics Agency, Redstone Arsenal, Alabama To Identify Potential Manufacturing/supply Sources, And If Future Efforts Can Be Competitive Or Set Aside For Small Business. T He Proposed North American Industry Classification Systems (naics) Code And The Corresponding Size Standard Of Employees Is Listed Below. This Sss Is To Notify Companies That The Defense Logistics Agency, Redstone Arsenal, Alabama, Is Seeking Qualified Sources For The Acquisition For The Item Listed Below In Support Of The Multiple Launch Rocket System.
this Requirement Will Be For A One-time Buy For The Following Item(s).
control Section, Gui, Nsn: 1420-01-540-8608, Part# 13540365, Naics-336419 & Size-1050
test Set, Rocket Lau, Nsn: 4933-01-711-0503, Part# 13547638, Naics-334419 & Size-750
test Set, Guided Mis, Nsn: 4993-01-710-7883, Part# 13547637, Naics-334419 & Size-750
the Technical Data For This Part Has Undergone Full Screening Per The Dfars Pgi 217.7506, Spare Parts Breakout Program. These Items Have Been Assigned Amc/amsc Codes 3b And 4d.
3b Must Be Acquired, For The Second Or Subsequent Time, Directly From The Actual Manufacturer. This Part Must Be Acquired From A Manufacturing Source(s) Specified On A Source Control Or Selected Item Drawing As Defined By The Current Version Of Dod-std-100. Suitable Technical Data, Government Data Rights, Or Manufacturing Knowledge Are Not Available To Permit Acquisition From Other Sources, Nor Qualification Testing Of Another Part, Nor Use Of A Second Source Part In The Intended Application. Although, By Dod-std-100 Definition, Altered And Selected Items Shall Have An Adequate Technical Data Package, Data Review Discloses That Required Data Or Data Rights Are Not In Government Possession And Cannot Be Economically Obtained. If One Source Is Available, Amcs 3, 4, Or 5 Are Valid. If At Least Two Sources Exist, Amcs 1 Or 2 Are Valid.
4d Must Be Acquired, For The First Time, Directly From The Actual Manufacturer. The Data Needed To Acquire This Part Competitively Is Not Physically Available, It Cannot Be Obtained Economically, Nor Is It Possible To Draft Adequate Specifications Or Any Other Adequate, Economical Description Of The Material For A Competitive Solicitation. Amcs 3, 4, Or 5 Are Valid.
as A Result, This Acquisition Is Currently Being Procured Under Federal Acquisition Regulation (far) 6.302-1(a)(2) Having Only A Limited Number Of Responsible Sources.
the Government Is Interested In All Businesses To Include 8(a), Small Business And Small Disadvantaged Business, Service-disabled Veteran-owned, Hubzone, And Women-owned Small Business Concerns. All Offerors Must Meet Prequalification Requirements In Order To Be Eligible For Award. The U.s. Army Combat Capabilities Development Command Aviation & Missile Center’s (avmc Devcom) System Readiness Directorate (srd), Sustainment Division (sd) Is The Engineering Source Authority For Source Approvals. Firms That Recognize And Can Produce The Required Item Described Above Are Encouraged To Identify Themselves. Firms Are Encouraged To Seek Source Approval In Order To Compete For Future Efforts By Emailing Inquiries To: Usarmy.redstone.devcom-avmc.mbx.amr-ss-sar@mail.mil. The Closing Date Annotated Is An Estimated Date And May Be Adjusted Dependent Upon The Date Of Release For Solicitation; However, The Solicitation Will Not Close Prior To The Date Stated Above. Foreign Firms Are Reminded That All Requests For Solicitation Must Be Processed Through Their Respective Embassies.
the Contractor Shall Be Capable Of Successfully Performing And Complying With Any And All Special Requirements In Accordance With The Terms And Conditions Set Forth In The Solicitation Annotated Above, At The Unit Prices Established At Time Of A Contract Award. The Contractor Will Be Responsible For Recurring And Nonrecurring Engineering Services Associated With Becoming A Qualified Source. The Contractor Will Also Be Responsible For All Aspects Of The Manufacturing/production Process, Including But Not Limited To - Supply Chain Management, Logistics, Forecasting Of Parts, Long-lead Parts Procurement, Material Forecasting, Obsolescence Issues And Final Delivery Of Assets As Well As Any And All Additional Costs Incurred Resulting From Contract Performance.
procurement Consists Of Two Or More Requirements For Supplies, Based On Forecasted Demands. The Subsequent Solicitation Shall Include A Request For Economic Order Quantities (eoqs) To Ensure Optimal Ordering Quantities. The Eoq Request, Is To Avoid Acquisitions In Disadvantageous Quantities And To Assist The Government In Developing Data For Current And Future Acquisitions Of This Item/these Items. The Government Anticipates The Offeror’s Proposal (in View Of Market Research, Historical Awards, The Nature Of The Item(s) Being Solicited, And The Current Economic Environment) Will Include Quantities/ranges That Will Vary From Those Being Solicited. The Solicited Quantities Are Based On Estimated Annual Demands And As Such Government Reserves The Right To Award The Most Advantageous Quantities &/or Ranges. The Government Retains The Right To Cancel This Procurement, Partially Or In Entirety Before Award. In The Event The Government Cancels This Acquisition (partially Or In Entirety) Before Award, The Government Has No Obligation To Reimburse An Offeror For Any Costs.
disclaimer: This Sss Is Issued Solely For Informational And Planning Purposes. It Does Not Constitute A Solicitation (request For Proposal Or Request For Quotation) Or A Promise To Issue A Solicitation In The Future And Shall Not Be Construed As A Commitment By The Government. Responses In Any Form Are Not Offers And The Government Is Under No Obligation To Award A Contract As A Result Of This Announcement. No Funds Are Available To Pay For Preparation Of Responses To This Announcement. Any Information Submitted By Respondents To This Technical Description Is Strictly Voluntary.
this Acquisition May Contain Technical Data Whose Export Is Restricted By The Arms Export Control Act (title 22, Usc., Sec 2751 Et Seq) Or The Export Administration Act (title 50, Usc., App 2401-2402) Executive Order 12470. Arms Export Information Cannot Be Released Outside The Untied States Without Prior Approval Of The Government. Export Control Requires The Applicable Certifications To Be Current For Both The Quoter And Manufacturer. The Offeror And Any Source(s) Of Supply It Will Use For Contract Performance Must Have An Active United States/canada Joint Certification Program (jcp) Certification To Access Export-control Data. Dla Does Not Intend To Delay Award In Order For An Ineligible Offer Or Its Source(s) Of Supply To Apply For And Receive Authority To Access The Export-controlled Data.
Closing Date25 Sep 2026
Tender AmountRefer Documents
DEPT OF THE AIR FORCE USA Tender
Aerospace and Defence
Corrigendum : Closing Date Modified
United States
Sole Source - 74243 - Eots Gap Analysis Service
Closing Date3 Mar 2025
Tender AmountRefer Documents
NATIONAL AERONAUTICS AND SPACE ADMINISTRATION USA Tender
Aerospace and Defence
United States
Technology Transfer Opportunity: Hyper-distributed Rfid Antenna (hydra) System (msc-tops-111)
Closing Date13 Aug 2025
Tender AmountRefer Documents
DEPT OF THE NAVY USA Tender
Machinery and Tools...+1Aerospace and Defence
Corrigendum : Closing Date Modified
United States
Nsn 7h-4310-012483144, Tdp Ver 018, Ref Nr 6309956, Qty 75 Ea, Deliver To W62g2t, W1a8 Dla Dist San Joaquin, Tracy, Ca 95304-5000. The Government Does Not Own The Data Or The Rights To The Data Needed To Purchase / Contract Repair Of This Part From Additional Sources. It Has Been Determined To Be Uneconomical To Buy The Data Or Rights To The Data. It Is Uneconomical To Reverse Engineer The Part. Interested Parties May Obtain Copies Of Military And Federal Specifications And Standards, Qualified Products Lists (qpls), Qualified Product Databases (qpds), Military Handbooks, And Other Standardized Documents From The Dod Single Stock Point (dodssp) At Document Automation And Production Service (daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assist Help Desk At 215-697-2667 Or 215-697-2179(dsn: 442-2667), Or Mail Their Requestdla Document Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. The Proposed Contract Action Is For Supplies Or Services For Which The Government Intends To Solicit And Negotiate With Only One Source Under The Authority Of Far 6.302-1. All Responsible Sources May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals, Quotations Or Capability Statements. This Notice Of Intent Is Not A Request For Competitive Proposals. However, All Proposals Received Within 45 Days (30 Days If Award Is Issued Under An Existing Basic Ordering Agreement (boa) After Date Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. Award Will Be Made Only If The Offeror, The Product/service, Or The Manufacturer Meets The Qualification Requirement(s) At Time Of Award, In Accordance With Far Clause 52.209-1. The Solicitation Identifies The Office Where Additional Information Can Be Obtained Concerning Qualification Requirements And Is Cited In Each Individual Solicitation. One Or More Of The Items Under This Acquisition Is Subject To: Free Trade Agreements, If Dfars Clause 252.225-7036 Buy American Act--free Trade Agreements--balance Of Payments Program, Is Included In The Solicitation. The World Trade Organization Government Procurement Agreement And Free Trade Agreements, If Dfars Clause 252.225-7021 Trade Agreements, Is Included In The Solicitation.
Closing Date17 Mar 2025
Tender AmountRefer Documents
DEFENSE LOGISTICS AGENCY USA Tender
Aerospace and Defence
Corrigendum : Closing Date Modified
United States
This Is Not A Solicitation.
nsn 1660-014920359 Will Be Solicited As A Firm-fixed Price Rfp To Obtain Offer(s) For A Single Contract For Dla Direct Delivery.
critical Application Item.
amc/amsc = 3/d
other Than Full And Open Competition Applies.
please Note: This Is Procurement From Approved Source Only,
approved Source: Mission Systems Orchard Park Inc Cage 04577 - - Large Business Oem P/n B49272-1
this Is A Restricted Source Item And Requires Engineering Source Approval By The Government Design Control Activity.(esa). Therefore, Altenate Offeror Must Provide A Complete Data Package (sar) Including Data For The Approved And Alternate Part For Evaluation.
adequate Data For The Evaluation Of Alternate Offers Is Not Available At The Procurement Agency. Therefore, Due To Criticality And Time Required For Esa Evaluation Of Alternate Offers, It Is Not Possible To Consider Alternate Offers For Current Award, But Those Meeting Evaluation Criteria Will Be Considered For Future Procurements If Approved By Esa After Complete Data Package (sar) Evaluation.
est Qty Up To 06 Kits
no Option Will Be Included.
fob- Origin
inspection And Acceptance - Origin
delivery Est At 800 Days Ado Or Best Available.
copies Of The Solicitation Will Not Be Available Until 15 Days After This Notice Is Published In Sam.gov. The Solicitation Will Be Available In Dibbs Approx. On February 14, 2025. At: Https://www.dibbs.bsm.dla.mil/rfp/.
all Responsible Sources May Submit A Proposal, Which Shall Be Considered. The Subject Requirement Is For Acquisition Of One Nsn For The Various End Items.
while Price May Be A Significant Factor In The Evaluation Of Offers, The Final Award Decision Will Be Based Upon A Combination Of Price, Delivery, Past Performance, And Other Evaluation Factors As Described In The Solicitation.
one Or More Of The Items Under This Acquisition May Be Subject To An Agreement On Government Procurement Approved And Implemented In The United States By The Trade Agreements Act Of 1979. All Offers Shall Be In The English Language And In U.s. Dollars.
based Upon Market Research, The Government Is Not Using The Policies Contained In Part 12, Acquisition Of Commercial Items, In Its Solicitation For The Described Supplies.
Closing Date17 Mar 2025
Tender AmountRefer Documents
DEPT OF THE NAVY USA Tender
Machinery and Tools...+1Aerospace and Defence
Corrigendum : Closing Date Modified
United States
Nsn 7h-2990-016110637-vn, Tdp Ver 003, Ref Nr 7662247, Qty 8 Ea, Deliver To W25g1u, W1a8 Dla Distribution, New Cumberland, Pa 17070-5002. The Government Does Not Own The Data Or The Rights To The Data Needed To Purchase / Contract Repair Of This Part From Additional Sources. It Has Been Determined To Be Uneconomical To Buy The Data Or Rights To The Data. It Is Uneconomical To Reverse Engineer The Part. Interested Parties May Obtain Copies Of Military And Federal Specifications And Standards, Qualified Products Lists (qpls), Qualified Product Databases (qpds), Military Handbooks, And Other Standardized Documents From The Dod Single Stock Point (dodssp) At Document Automation And Production Service (daps) In Philadelphia, Pa. Note: Patterns, Drawings, Deviation Lists, Purchase Descriptions, Etc. Are Not Stocked At Dodssp. Most Documents Are Available In Adobe Pdf Format From Assist-online At: Http://quicksearch.dla.mil/. Users May Use Assist-quick Search To Search For And Download Available Documents Directly Using Standard Browser Software. Documents That Are Not Available For Downloading From Assist-quick Search Can Be Ordered From The Dodssp Website Using The Assist Shopping Wizard After Obtaining A Dodssp Customer Account By Following The Registration Procedures. Users Who Do Not Have Access To The Internet May Contact The Dodssp Assist Help Desk At 215-697-2667 Or 215-697-2179(dsn: 442-2667), Or Mail Their Requestdla Document Services, Bldg. 4/d, 700 Robbins Avenue, Philadelphia Pa 19111-5094. The Proposed Contract Action Is For Supplies Or Services For Which The Government Intends To Solicit And Negotiate With Only One Source Under The Authority Of Far 6.302-1. All Responsible Sources May Identify Their Interest And Capability To Respond To The Requirement Or Submit Proposals, Quotations Or Capability Statements. This Notice Of Intent Is Not A Request For Competitive Proposals. However, All Proposals Received Within 45 Days (30 Days If Award Is Issued Under An Existing Basic Ordering Agreement (boa) After Date Of Publication Of This Synopsis Will Be Considered By The Government. A Determination By The Government Not To Compete With This Proposed Contract Based Upon Responses To This Notice Is Solely Within The Discretion Of The Government. Information Received Will Normally Be Considered Solely For The Purpose Of Determining Whether To Conduct A Competitive Procurement. Award Will Be Made Only If The Offeror, The Product/service, Or The Manufacturer Meets The Qualification Requirement(s) At Time Of Award, In Accordance With Far Clause 52.209-1. The Solicitation Identifies The Office Where Additional Information Can Be Obtained Concerning Qualification Requirements And Is Cited In Each Individual Solicitation. One Or More Of The Items Under This Acquisition Is Subject To: Free Trade Agreements, If Dfars Clause 252.225-7036 Buy American Act--free Trade Agreements--balance Of Payments Program, Is Included In The Solicitation. The World Trade Organization Government Procurement Agreement And Free Trade Agreements, If Dfars Clause 252.225-7021 Trade Agreements, Is Included In The Solicitation.
Closing Date21 Feb 2025
Tender AmountRefer Documents
DEPT OF THE ARMY USA Tender
Aerospace and Defence
Corrigendum : Closing Date Modified
United States
Army Contracting Command- Detroit Arsenal (acc-dta) Intends To Solicit Under Solicitation W912ch-24-0203 For The Procurement Of 10,128 Each, Nsn:1005-01-576-4661, Stock, Gun, Shoulder Under A Firm Fixed Price, Five Year Indefinite Delivery, Indefinite Quantity (idiq) Type Contract Under (far) 16.504. This Solicitation Is A 100% Small Buisness Set-aside.
there Is A Licensing Agreement Associated With This Procurement. As Such A Nondisclosure Agreement And Non-use Agreement(special Licenses Rights) Is To Be Signed By Anauthorized Representative Of The Offeror Before The Offeror Is Granted Access To The Technical Data. Reference Section C For The Specifics.
this Item Is Export Controlled. All Responsible Sources May Submit A Capability Statement, Proposal, Or Quotation, Which Shall Be Considered By The Agency. This Is A Notice Of Intent, Not A Request For Competitive Proposals, Or A Solicitation Of Offers. The Government Does Not Intend To Award A Contract On The Basis Of Information In This Posting Or Information Received As A Result Of This Posting. The Contents Of Any Future Request For Proposal (rfp) Takes Precedence Over This Presolicitation Synopsis Posting. All Responsible Sources Must Be Registered In The Dod’s System For Award Management (sam) System At Https://www.sam.gov And Follow All Other Responsibility Criteria Indicated At Far 9.104. Information On Getting Registered May Be Obtained On The Sam Website. The Solicitation Will Incorporate Export Controlled Technical Data Packages (tdps). Access To The Export Controlled Portion Of The Tdp Will Require Vendors To Be Certified In The Joint Certification Program (jcp). If You Are Not Registered In The Jcp, Or Your Certification Has Expired, Please Mail Dd Form 2345 Https://www.dlis.dla.mil/jcp/forms/dd2345form.pdf To The Following Address: U.s./canada Joint Certification Office Defense Logistics Information Service Federal Center, 74 Washington Ave., North Battle Creek. Mi Usa 49037-3084. Caution: The Solicitation Will Be Issued Electronically As Will Any Amendments Thereto. Because Of This, The Government Is Under No Obligation And Is In Fact Unable To Maintain A Bidders Mailing List. It Is Therefore Incumbent Upon Any Interested Parties To Periodically Access The Above Internet Address In Order To Obtain Any Amendments Which May Be Issued. Failure To Obtain Any Said Amendments And To Respond To Them Prior To The Date And Time Set For Bid Opening/receipt Of Proposals May Render Your Bid Or Proposal Nonresponsive And Result In The Rejection Of The Same.
Closing Date25 Feb 2025
Tender AmountRefer Documents
3681-3690 of 4269 active Tenders