Advertisement Tenders

Details: Rfq Type Goods Goods Fleet Light And Medium Vehicle Spares ( Reference Number Wf12500073 Title Supply Parts Description 1 Each X Cct34764 26" Wiper Blade 2 Each X Cct34764 H7 12v Bulbs 2 Each X Cct34764 501 12v Bulbs 2 Each X Cct34764 12v Double Contact Bulbs 2 Each X Cct34764 12v Amber Light Bulb 2 Each X Cct34764 Cr2032 Remote Batteries 2 Each X Cct34764 Front Brake Discs 1 Each X Cct34764 Front Brake Pads Set 4 Each X Cct34764 Wheel Stud 4 Each X Cct34764 Wheel Nut Specification* Reg/type/make/model Cct34764 Toyota Etios 1.5 Al 2020 Vin Mbjb29bt600127391 Quotation N/a Mileage 216608 Km Notification 902177804 Contact Person Nathan Arendse 082 077 0530 Please Deliver Parts To Bea Griffiths 083 654 6452 At Khayelitsha Workshop - Cnr Makhebeni & Zakhele Rd ? Can You Dilver Parts In Khayelitsha? * Reg/type/make/model Cct34764 Toyota Etios 1.5 Al 2020 Vin Mbjb29bt600127391 Quotation N/a Mileage 216608 Km Notification 902177804 Contact Person Nathan Arendse 082 077 0530 Please Deliver Parts To Bea Griffiths 083 654 6452 At Khayelitsha Workshop - Cnr Makhebeni & Zakhele Rd ? Can You Dilver Parts In Khayelitsha? * Reg/type/make/model Cct34764 Toyota Etios 1.5 Al 2020 Vin Mbjb29bt600127391 Quotation N/a Mileage 216608 Km Notification 902177804 Contact Person Nathan Arendse 082 077 0530 Please Deliver Parts To Bea Griffiths 083 654 6452 At Khayelitsha Workshop - Cnr Makhebeni & Zakhele Rd ? Can You Dilver Parts In Khayelitsha? * Reg/type/make/model Cct34764 Toyota Etios 1.5 Al 2020 Vin Mbjb29bt600127391 Quotation N/a Mileage 216608 Km Notification 902177804 Contact Person Nathan Arendse 082 077 0530 Please Deliver Parts To Bea Griffiths 083 654 6452 At Khayelitsha Workshop - Cnr Makhebeni & Zakhele Rd ? Can You Dilver Parts In Khayelitsha? * Reg/type/make/model Cct34764 Toyota Etios 1.5 Al 2020 Vin Mbjb29bt600127391 Quotation N/a Mileage 216608 Km Notification 902177804 Contact Person Nathan Arendse 082 077 0530 Please Deliver Parts To Bea Griffiths 083 654 6452 At Khayelitsha Workshop - Cnr Makhebeni & Zakhele Rd ? Can You Dilver Parts In Khayelitsha? * Reg/type/make/model Cct34764 Toyota Etios 1.5 Al 2020 Vin Mbjb29bt600127391 Quotation N/a Mileage 216608 Km Notification 902177804 Contact Person Nathan Arendse 082 077 0530 Please Deliver Parts To Bea Griffiths 083 654 6452 At Khayelitsha Workshop - Cnr Makhebeni & Zakhele Rd ? Can You Dilver Parts In Khayelitsha? * Reg/type/make/model Cct34764 Toyota Etios 1.5 Al 2020 Vin Mbjb29bt600127391 Quotation N/a Mileage 216608 Km Notification 902177804 Contact Person Nathan Arendse 082 077 0530 Please Deliver Parts To Bea Griffiths 083 654 6452 At Khayelitsha Workshop - Cnr Makhebeni & Zakhele Rd ? Can You Dilver Parts In Khayelitsha? * Reg/type/make/model Cct34764 Toyota Etios 1.5 Al 2020 Vin Mbjb29bt600127391 Quotation N/a Mileage 216608 Km Notification 902177804 Contact Person Nathan Arendse 082 077 0530 Please Deliver Parts To Bea Griffiths 083 654 6452 At Khayelitsha Workshop - Cnr Makhebeni & Zakhele Rd ? Can You Dilver Parts In Khayelitsha? * Reg/type/make/model Cct34764 Toyota Etios 1.5 Al 2020 Vin Mbjb29bt600127391 Quotation N/a Mileage 216608 Km Notification 902177804 Contact Person Nathan Arendse 082 077 0530 Please Deliver Parts To Bea Griffiths 083 654 6452 At Khayelitsha Workshop - Cnr Makhebeni & Zakhele Rd ? Can You Dilver Parts In Khayelitsha? * Reg/type/make/model Cct34764 Toyota Etios 1.5 Al 2020 Vin Mbjb29bt600127391 Quotation N/a Mileage 216608 Km Notification 902177804 Contact Person Nathan Arendse 082 077 0530 Please Deliver Parts To Bea Griffiths 083 654 6452 At Khayelitsha Workshop - Cnr Makhebeni & Zakhele Rd ? Can You Dilver Parts In Khayelitsha? Delivery Date2025/02/28 Delivery Tonathan Arendse Khayelitsha Workshop Delivery Address1 Khayelitsha Workshop, Cnr Makhebeni & Zakhele Rd Contact Personnathan Arendse Telephone Number0000000000 Cell Number0820770530 Closing Date2025/02/11 Closing Time02 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 20000000000 Buyer Email Addresswf1@capetown.gov.za Buyer Detailsr. Davids Buyer Phone0214444397 Attachments No Attachments Note This Commodity Is Only Available For Online Quoting. No Manual Submissions Will Be Accepted For This Commodity. Suppliers Will Need Must Log In To E-services Portal To Access Rfq Information And To Submit Quotations. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Tools & Machinery Reference Number Gd12500585 Title Fluke 376 Fc - New Description 3 Each X Fluke 376 Fc - New 1 Each X Fluke 376 Fc - Replacement Specification* Quotation Conditions Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Fluke 376 Fc 1000am Trms Clamp + 1 Flex 18" Or Equivalent Maximum Voltage Between Any Terminal And Earth Ground 1000 V Battery Type 2 Aa Alkaline Batteries, Neda 15a, Iec Lr6 Temperature Operating -10 °c To +50 °c (14 °f To + 122 °f) Storage -40 °c To +60 °c (-40 °f To + 140 °f) Operating Humidity Non Condensing (<(><<)> 10 °c (50 °f)), =90 % Rh (at 10 °c To 30 °c (50 °f To 86 °f)), =75 % Rh (at 30 °c To 40 °c (86 °f To 104 °f)), =45 % Rh (at 40 °c To 50 °c (104 °f To 122 °f)) Altitude Operating 3,000 M (9,842 Ft) Storage 12,000 M (39,370 Ft) Dimensions 24.9 Cm (9.8 In) X 8.5 Cm (3.3 In) X 4.5 Cm (1.7 In) Weight 395 G (13.9 Oz) Jaw Opening 34 Mm (1.3 In) Flexible Current Probe Diameter 7.5 Mm (.29 In) Flexible Current Probe Cable Length (head To Electronics Connector) 1.8 M (70.8 In) Safety Iec 61010-1, Pollution Degree 2 Iec 61010-2-032 Cat Iii 1000 V / Cat Iv 600 V Iec 61010-2-033 Cat Iii 1000 V / Cat Iv 600 V Ip Rating Iec 60529 Ip30, Non-operating Radio Frequency Certification Fcc Id T68-fble Ic 6627a-fbl Contact Person Algernon Clayton 021 444 1885 / Algernon.clayton@capetown.gov.za * Fluke 376 Fc 1000am Trms Clamp + 1 Flex 18" Or Equivalent Maximum Voltage Between Any Terminal And Earth Ground 1000 V Battery Type 2 Aa Alkaline Batteries, Neda 15a, Iec Lr6 Temperature Operating -10 °c To +50 °c (14 °f To + 122 °f) Storage -40 °c To +60 °c (-40 °f To + 140 °f) Operating Humidity Non Condensing (<(><<)> 10 °c (50 °f)), =90 % Rh (at 10 °c To 30 °c (50 °f To 86 °f)), =75 % Rh (at 30 °c To 40 °c (86 °f To 104 °f)), =45 % Rh (at 40 °c To 50 °c (104 °f To 122 °f)) Altitude Operating 3,000 M (9,842 Ft) Storage 12,000 M (39,370 Ft) Dimensions 24.9 Cm (9.8 In) X 8.5 Cm (3.3 In) X 4.5 Cm (1.7 In) Weight 395 G (13.9 Oz) Jaw Opening 34 Mm (1.3 In) Flexible Current Probe Diameter 7.5 Mm (.29 In) Flexible Current Probe Cable Length (head To Electronics Connector) 1.8 M (70.8 In) Safety Iec 61010-1, Pollution Degree 2 Iec 61010-2-032 Cat Iii 1000 V / Cat Iv 600 V Iec 61010-2-033 Cat Iii 1000 V / Cat Iv 600 V Ip Rating Iec 60529 Ip30, Non-operating Radio Frequency Certification Fcc Id T68-fble Ic 6627a-fbl Contact Person Algernon Clayton 021 444 1885 / Algernon.clayton@capetown.gov.za Delivery Date2025/02/28 Delivery Toelectricity - Ndabeni Red1 Plant / Ph 511 0410 Delivery Address0000 Generic Plant, Cape Town Contact Personalgernon Clayton Telephone Number0214441885 Cell Number Closing Date2025/02/14 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgd1.quotations@capetown.gov.za Buyer Detailsa.filby Buyer Phone0214009269 Attachments No Attachments Note This Commodity Has Gone Live For Only Quoting On The E-procurement Portal. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Synopsis: introduction: in Accordance With Federal Acquisition Regulation (far) 10.002(b)(2), This Sources Sought Notice Is For Market Research And Information Purposes Only At This Time And Shall Not Be Construed As A Solicitation Or As An Obligation On The Part Of The Department Of Veterans Affairs (va). the Department Of Veterans Affairs, Veterans Health Administration (vha), Program Contracting Activity Central (pcac) Is Conducting A Market Survey And Is Seeking Potential Sources For The Ehrm Infrastructure Upgrades Data Center Construction Project At The St. Louis Va Medical Center (vamc) Located At 1 Jefferson Barracks Dr., St. Louis, Mo 63125. project Description: the St. Louis (jefferson Barracks) Vamc Is Seeking A General Contractor To Furnish All Labor, Tools, Materials, Equipment, And Supervision To Construct A New Ehrm Data Center In The Basement Of Bldg. 56. The Current Data Center In Bldg. 1 Will Be Relocated To Bldg. 56. The Scope Of This Project Includes But Not Limited To The Following Infrastructure Improvements: Electrical (power (normal, Emergency), Lighting), Bonding, Ups, Building Management System Interfaces, Assess For New Hvac, New Space Construction (walls, Doors, Finishes), Fire Suppression System, Communication Infrastructure (new Data Outlets, Patch Panels, Cat 6a Cable), Physical Security, Fiber Infrastructure Backbone Connectivity To Mda. procurement Information: the Proposed Project Will Be A Competitive Firm-fixed-price Contract Utilizing The Design-bid-build Approach (final Specifications And Drawings Will Be Provided). The Anticipated Solicitation Will Be Issued As Either A Request For Proposal (rfp) In Accordance With Far Part 15, Considering Technical And Price Factors Or As An Invitation For Bid (ifb) In Accordance With Far Part 14. The Results And Analysis Of The Market Research Will Finalize The Determination Of The Procurement Method. The Type Of Socio-economic Set-aside, If Any, Will Depend Upon The Responses To This Notice And Any Other Information Gathered During The Market Research Process. this Project Is Planned For Advertising In March 2025. In Accordance With Vaar 836.204, The Magnitude Of Construction Is Between $5,000,000.00 And $10,000,000.00. The Applicable North American Industry Classification System (naics) Code Is 236220 With A Size Standard Of $45 Million. The Duration Of The Project Is Currently Estimated At 240 Calendar Days From The Issuance Of A Notice To Proceed. The Services For This Project Will Include Providing All Construction Related Services Such As: Providing Labor, Materials And Equipment Required To Complete The Project As Per Contract Documents Prepared By An Independent Architect-engineer Firm. the Results And Analysis Of The Market Research Will Determine Whether To Limit Competition Among The Small Business Categories, Proceed With Full And Open Competition As Other Than Small Business, Or Use A Tiered Set-aside Evaluation. The Type Of Socioeconomic Set-aside, If Any, Will Depend Upon The Responses To This Notice And Any Other Information Gathered During The Market Research Process. All Socioeconomic Categories Are Encouraged To Respond To This Announcement. capability Statement: respondents Shall Provide A General Capabilities Statement To Include The Following Information: section 1: Provide Company Name, Unique Entity Identifier Number Associate With Sam.gov, Company Address, Point-of-contact Name, Phone Number And Email. section 2: Provide Company Business Size Based On Naics Code 236220. Also, Provide Business Type (i.e., Large Business, Small Business, Service-disabled Veteran Owned Small Business, Small Disadvantaged Business, Women-owned Small Business, Hub Zone Small Business, Etc.). section 3: Provide A Statement Of Interest In The Project. section 4: Provide The Prime Contractor S Available Bonding Capacity In The Form Of A Letter Of Intent From Your Bonding Company With This Submission. section 5: Provide The Type Of Work Your Company Has Performed In The Past In Support Of The Same Or Similar Requirement. This Section Is Important As It Will Help To Determine The Type Of Socio-economic Set-aside, If Any. Please Provide The Following In Your Response: no More Than Three (3) Contracts That Your Company Has Performed Within The Last Seven (7) Years That Are Of Comparable Size, Complexity, And Scope To This Requirement. Include The Project Name, Project Owner And Contact Information As This Person May Be Contacted For Further Information, Project Scope, Project Size (example: Square Footage), Building Use (example: Medical Facility, Office Building, Etc.), Project Dollar Value, Start And Completion Dates. describe Specific Technical Skills And Key Personnel Your Company Possess To Perform The Requirements Described Under Description Of Work. describe Your Self-performed** Effort (as Either A Prime Or Subcontractor). Describe Self-performed Work In Terms Of Dollar Value And Description. **self-performed Means Work Performed By The Offeror Themselves, Not Work Performed By Another Company For Them For Any Of The Project Examples Provided. it Is Requested That Interested Contractors Submit A Response (electronic Submission) Of No More Than Eight (8) Single Sided Pages, Single-spaced, 12-point Font Minimum That Addresses The Above Information. This Response Must Be Submitted As A Single Application-generated (not Scanned) Pdf Document That Is Less Than Or Equal To 4mb In Size. Please Note That Hard Copies Will Not Be Accepted. Please Also Include A Cover Page, Which Includes, At A Minimum: The Company S Name, Address, Dun & Bradstreet Number, Socio-economic Status, Point-of-contact Name, Phone Number, And E-mail Address. Responses Must Include The Sources Sought Number And Project Title In The Subject Line Of Their E-mail Response. Submissions (responses) Shall Be Submitted Via Email To The Primary Point Of Contact Listed Below By February 13, 2025 At 1:00 Pm Et. No Phone Calls Will Be Accepted. the Capabilities Statement Submitted In Response To This Sources Sought Shall Not Be Considered To Be A Bid Or Proposal. This Notice Is For Information And Planning Purposes Only And Is Neither To Be Construed As A Commitment By The Government Nor Will The Government Pay For Information Solicited. No Evaluation Letters And/or Results Will Be Issued To The Respondents. After Completing Its Analyses, The Government Will Determine Whether To Limit Competition Among The Small Business Categories Listed Above Or Proceed With Full And Open Competition As Other Than Small Business. at This Time No Solicitation Exists; Therefore, Please Do Not Request A Copy Of The Solicitation. If A Solicitation Is Released It Will Be Synopsized In Contract Opportunities At Https://sam.gov. It Is The Potential Offeror's Responsibility To Monitor This Site For The Release Of Any Solicitation Or Synopsis. contracting Office Address: vha Program Contracting Activity Central (vha-pcac) 6100 Oak Tree Blvd., Suite 490 independence, Oh 44131 primary Point Of Contact: thomas Council contract Specialist thomas.council@va.gov

Details: Description Republic Of The Philippines Provincial Government Of Eastern Samar Capitol Building, Borongan, Eastern Samar, 6800 Tel No. (055)-560-8312 E-mail Address: Esamar.bac@gmail.com Bids And Awards Committee (bac) Invitation To Bid For Construction Of Barangay Hall Brgy. Danao, Taft, Eastern Samar 1. The Provincial Government Of Eastern Samar, Through The 20% Edf 2025 Intends To Apply The Sum Of One Million One Hundred Thousand Pesos Only (php1,100,000.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract Itb No. 2025-02-090 Construction Of Barangay Hal, Brgy. Danao, Taft, Eastern Samar. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Eastern Samar Now Invites Bids, Item No. B.5 – Project Billboard/signboard (1.00 Each), Item No. B.7 – Occupational Safety And Health Program (2.33 Month), Item No. B.9 – Mobilization/demobilization (1.00 L.s.), Item No. 900 – Structural Concrete (3.56 Cu.m.), Item No. 902(1) – Reinforcing Steel (deformed) (992.44 Kg), Item No. 903(2) – Formworks And Falseworks (42.00 Sq.m.), Item No. 1046 – 100mm Chb Non Load Bearing (including Reinforcing Steel) (91.87 Sq.m.), Item No. 1018(1) – Glazed Tiles And Trims (40.60 Sq.m.), Item No. 1027(1) – Cement Plaster Finish (183.74 Sq.m.), Item No. 1010(2)b – Wooden Panel Door (1.89 Sq.m.), Item No. 1008 – Aluminum Glass Window (sliding/casement/awning/fixed Type) (8.64 Sq.m.), Item No. 1003(1) – 4.5mm Fiber Cement Board On Metal Frame Ceiling (40.60 Sq.m.), Item No. Spcl-1 – Electrical Works (1.00 L.s.), Item No. 1032(1)a – Painting Works (masonry Painting) (183.74 Sq.m.), Item No. 1047(2)b – Structural Steel Roof Truss (821.06 Kg), Item No. 1047(2)c – Structural Purlins (384.34 Kg), Item No. 1047(5) – Metal Structures Accessories (steel Plate) (527.51 Kg), Item No. 1047(3)b – Metal Structure Accessories (sag Rods) (24.00 Pc), Item No. 1047(3)c – Metal Structure Accessories (anchor Bolts) (32.00 Pc), Item No. 1047(3)d – Metal Structure Accessories (cross Bracing) (2.00 Pc), Item No. 1047(3)c – Metal Structure Accessories (turn Buckle) (2.00 Pc), Item No. 1014 – Prepainted Metal Sheets, Long Span (40.89 Sq.m.), Item No. 1013(2)a2 – Fabricated Metal Roofing Accessory (flashing/counter Flashing) (25.60 L.m.), Item No. 1032(1)c1 – Painting Works (metal Painting) (66.32 Sq.m.), Item No. 1001(1)a3 – Pipes And Fittings (pvc) (100mm) (11.70 M), Completion Of The Works Is Required Within 70 Calendar Days. Bidders Should Have Completed Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From The Provincial Government Of Eastern Samar And Inspect The Bidding Documents At The Address Given Below From 8:00 Am – 5:00pm, Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Three Thousand Pesos Only (php3,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later That The Submission Of Their Bids. 6. The Provincial Government Of Eastern Samar Will Hold A Pre-bid Conference On February 03, 2025, 10:00 A.m., At The Bids And Awards Committee Office, Capitol Building, Borongan City, Which Shall Be Open Only To All Interested Parties Who Have Purchased The Bidding Documents. 7. Bids Must Be Delivered To The Address Below On Or Before February 17, 2025, 10:00 A.m., At The Bids And Awards Committee Office, Capitol Building, Borongan City. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. The Procurement Process Will Be Conducted In Accordance With The Schedules Provided In Ra 9184 And Its Rirr For Advertisements, Receipt Of Letters Of Intent, And Issuance Of Bid Documents. 9. The Provincial Government Of Eastern Samar Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Nelson F. Cortez Chairman, Bids And Awards Committee Bids And Awards Committee Office Capitol Building, Borongan City Mobile No.09177583330 E-mail Address: Easternsamar.gov.ph Esamar.bac@gmail.com Nelson F. Cortez Bac Chairman

Details: Rfq Type Goods Goods Clothing, Ppe & Accessories Reference Number Ga12500424 Title Clothing & Footwear Description 1 Pair X Bova Hamburg Safety Shoe Size 6 1 Pair X Bova Hamburg Safety Shoe Size 7 2 Pair X Bova Hamburg Safety Shoe Size 8 1 Pair X Bova Hamburg Safety Shoe Size 9 Specification* Ref Ga12500424 Please Deliver To: Block A2, Electricity Hq, Bloemhof Centre, Bloemhof Road Contat Person Reanette Geswind: 021 444 8474 Specs: Sizes 4-12 Colour Grey Upper Suede Leather 4 Pair Eyelet Lace-up Reflective Safety Stripes For Enhanced Visibility Padded Tongue And Collar For Comfort Lining The Quarter Lining Is From An Industrial Quality Ferrabelle Non-woven Material The Vamp Lining Is From A Hi-tech Needle-fibre Blend With Excellent Perspiration Absorbency In Sock Anti-static Non-woven In-sock For Comfort And Stability Top Sock Anti-static Non-woven In-sock For Comfort And Stability Midsole Shank Reinforcement For Arch Support Toe Cap Steel Sole Dual Density Pu/pu (heat-resistant Up To 95°c) Nrcs/9002/287766/0116 Sans / Iso 20345 Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. #wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" #nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. * Please Deliver To: Block A2, Electricity Hq, Bloemhof Centre, Bloemhof Road Contat Person Reanette Geswind: 021 444 8474 Specs: Sizes 4-12 Colour Grey Upper Suede Leather 4 Pair Eyelet Lace-up Reflective Safety Stripes For Enhanced Visibility Padded Tongue And Collar For Comfort Lining The Quarter Lining Is From An Industrial Quality Ferrabelle Non-woven Material The Vamp Lining Is From A Hi-tech Needle-fibre Blend With Excellent Perspiration Absorbency In Sock Anti-static Non-woven In-sock For Comfort And Stability Top Sock Anti-static Non-woven In-sock For Comfort And Stability Midsole Shank Reinforcement For Arch Support Toe Cap Steel Sole Dual Density Pu/pu (heat-resistant Up To 95°c) Nrcs/9002/287766/0116 Sans / Iso 20345 * Please Deliver To: Block A2, Electricity Hq, Bloemhof Centre, Bloemhof Road Contat Person Reanette Geswind: 021 444 8474 Specs: Sizes 4-12 Colour Grey Upper Suede Leather 4 Pair Eyelet Lace-up Reflective Safety Stripes For Enhanced Visibility Padded Tongue And Collar For Comfort Lining The Quarter Lining Is From An Industrial Quality Ferrabelle Non-woven Material The Vamp Lining Is From A Hi-tech Needle-fibre Blend With Excellent Perspiration Absorbency In Sock Anti-static Non-woven In-sock For Comfort And Stability Top Sock Anti-static Non-woven In-sock For Comfort And Stability Midsole Shank Reinforcement For Arch Support Toe Cap Steel Sole Dual Density Pu/pu (heat-resistant Up To 95°c) Nrcs/9002/287766/0116 Sans / Iso 20345 * Please Deliver To: Block A2, Electricity Hq, Bloemhof Centre, Bloemhof Road Contat Person Reanette Geswind: 021 444 8474 Specs: Sizes 4-12 Colour Grey Upper Suede Leather 4 Pair Eyelet Lace-up Reflective Safety Stripes For Enhanced Visibility Padded Tongue And Collar For Comfort Lining The Quarter Lining Is From An Industrial Quality Ferrabelle Non-woven Material The Vamp Lining Is From A Hi-tech Needle-fibre Blend With Excellent Perspiration Absorbency In Sock Anti-static Non-woven In-sock For Comfort And Stability Top Sock Anti-static Non-woven In-sock For Comfort And Stability Midsole Shank Reinforcement For Arch Support Toe Cap Steel Sole Dual Density Pu/pu (heat-resistant Up To 95°c) Nrcs/9002/287766/0116 Sans / Iso 20345 Delivery Date2025/02/28 Delivery Toelectricity - Bloemhof Materials Store / Ph: 444 1859 Delivery Address1 Bloemhof Road, Bellville Contact Personreanette Geswind Telephone Number0214448474 Cell Number Closing Date2025/02/18 Closing Time03:00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressga1.quotations@capetown.gov.za Buyer Detailsr.ross Buyer Phone0214009530 Attachments No Attachments Note On 1 November 2017 The City Of Cape Town Went Live With E-procurement Which Was Piloted With 3 Commodities: Clothing, Building Hardware And Is&t. No Manual Submissions Will Be Accepted For These Commodities And Suppliers Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: This Requirement Is Advertised As Sole Source. The Notice Is Published For Information Purposes Only And Is Not A Request For Competitive Proposals. This Acquisition Is Being Pursued On A Sole Source Basis Under The Statutory Authority Of Title 10, U.s.c. Section 2304(c) (1), As Implemented By Federal Acquisition Regulation (far) 6.302-1, "only One Responsible Source And No Other Supplies Or Services Will Satisfy Agency Requirements." A Determination By The Government Not To Compete This Effort Is Solely Within The Discretion Of The Government. The Government Will Not Pay For Any Information Received. this Announcement Constitutes The Only Solicitation, And A Written Solicitation Will Not Be Issued. The Government Will Consider Other Bids. This Requirement Is Being Synopsized As A Small Business Set Aside Under The North American Industry Classification System (naics) Code 334515, And Psc Code 5840. ****note: The Required Fill-in Provisions 52.204-24 And 52.204-26 Attached To This Post Must Be Filled In And Returned With Your Quote To Be Considered For Award. **** the Naval Air Warfare Center- Aircraft Division (nawcad) At Patuxent River, Md Announces Its Intention To Procure, On A Sole Source (ss) Basis To Viasat, Inc., 1725 Breckinridge Plz, Duluth, Georgia 30096-8982. the Contractor Shall Provide: one (1) 4100+ Antenna Control Unit. please See Attached Statement Of Work For Specifications. the Anticipated Delivery Is On Or Before Twenty-six (26) Weeks After Receipt Of The Order (aro). delivery Address: naval Air Warfare Center Aircraft Division - Atlantic Test Range attn: Ron Swann / Tim Sartori 23013 Cedar Point Rd., Bldg 2118 patuxent River, Md 20670 this Is A Firm-fixed Price Procurement; Therefore, The Offeror's Initial Offer Should Represent The Vendor's Best Quote In Terms Of Price And Acceptability. shipping Charges: Fob Destination. 20670. contracting Office Address: 21983 Bundy Road, Building 441 Patuxent River, Md 20670 technical Acceptability Will Be Determined Solely On The Content And Merit Of The Information Submitted In Response To This Synopsis/solicitation. Therefore, It Is Incumbent On The Offeror To Provide Sufficient Technical Literature, Documentation, Etc. For The Government To Make An Adequate Technical Assessment Of The Proposal. A Firm Fixed Price Contract Is Anticipated. The Provision At 52.212-1, Instructions To Offerors-commercial Items, (deviation 2018-o0018) Is Incorporated By Reference And Applies To This Acquisition. The Provision At 52.212-2 Evaluation – Commercial Items (oct 2014) Applies To This Acquisition. The Government Will Award In Accordance With Far Part 12 On A Lowest Priced, Technically Acceptable Basis. The Offeror Shall Provide Backup Information Verifying The Price Offered, E.g., A Copy Of Current Catalog, Invoices For The Same Equipment, Etc. Each Offeror Shall Include A Completed Copy Of The Provision At Far 52.212-3 Offeror Representations And Certifications – Commercial Items (mar 2020) With Its Quote. Far 52.247-34 F.o.b. Destination (nov 1991) Is Incorporated By Reference And Applies To This Acquisition. Far 52.212-4 Contract Terms And Conditions – Commercial Items (oct 2018) Is Incorporated By Reference And Applies To This Acquisition. The Clause At 52.212-5 Contract Terms And Conditions Required To Implement Statutes Or Executive Orders – Commercial Items (deviation 2018-o0021) Is Incorporated By Reference. 52.204-27 Prohibition On A Bytedance Covered Application (jun 2023) (a) Definitions. As Used In This Clause-- covered Application Means The Social Networking Service Tiktok Or Any Successor Application Or Service Developed Or Provided By Bytedance Limited Or An Entity Owned By Bytedance Limited. information Technology, As Defined In 40 U.s.c. 11101(6)-- (1) Means Any Equipment Or Interconnected System Or Subsystem Of Equipment, Used In The Automatic Acquisition, Storage, Analysis, Evaluation, Manipulation, Management, Movement, Control, Display, Switching, Interchange, Transmission, Or Reception Of Data Or Information By The Executive Agency, If The Equipment Is Used By The Executive Agency Directly Or Is Used By A Contractor Under A Contract With The Executive Agency That Requires The Use- (i) Of That Equipment; Or (ii) Of That Equipment To A Significant Extent In The Performance Of A Service Or The Furnishing Of A Product; (2) Includes Computers, Ancillary Equipment (including Imaging Peripherals, Input, Output, And Storage Devices Necessary For Security And Surveillance), Peripheral Equipment Designed To Be Controlled By The Central Processing Unit Of A Computer, Software, Firmware And Similar Procedures, Services (including Support Services), And Related Resources; But (3) Does Not Include Any Equipment Acquired By A Federal Contractor Incidental To A Federal Contract. (b) Prohibition. Section 102 Of Division R Of The Consolidated Appropriations Act, 2023 (pub. L. 117-328), The No Tiktok On Government Devices Act, And Its Implementing Guidance Under Office Of Management And Budget (omb) Memorandum M-23-13, Dated February 27, 2023, "no Tiktok On Government Devices" Implementation Guidance, Collectively Prohibit The Presence Or Use Of A Covered Application On Executive Agency Information Technology, Including Certain Equipment Used By Federal Contractors. The Contractor Is Prohibited From Having Or Using A Covered Application On Any Information Technology Owned Or Managed By The Government, Or On Any Information Technology Used Or Provided By The Contractor Under This Contract, Including Equipment Provided By The Contractor's Employees; However, This Prohibition Does Not Apply If The Contracting Officer Provides Written Notification To The Contractor That An Exception Has Been Granted In Accordance With Omb Memorandum M-23-13. (c) Subcontracts. The Contractor Shall Insert The Substance Of This Clause, Including This Paragraph (c), In All Subcontracts, Including Subcontracts For The Acquisition Of Commercial Products Or Commercial Services. (end Of Clause). quotes Are Due To Shannon Canada, Purchasing Agent, At Shannon.m.canada.civ@us.navy.mil. please Provide The Following Information With Your Quote: cage Code: uei #: payment Terms Of Net 30. pricing - Are These Items On A Commercial Published, On-line, Or Internal Price List. if Available On A Price List Provide A Copy. All Price Listings Will Be Kept Confidential. if Not Available On A Price List Please Provide Information On How Pricing Is Determined (example: Item Cost+ %, Labor Rate And Materials, Etc.) estimated Delivery Date Or Period Of Performance: invoicing And Payment Will Be Made Thru Wide Area Workflow (wawf), Terms: Net 30. As Of October 1, 2007, It Became Mandatory To Be Registered To Process Any Government Procurement. If You Are Not Registered, Please Take A Moment To Do So At Https://wawf.eb.mil/.

Details: Description Republic Of The Philippines Provincial Government Of Eastern Samar Capitol Building, Borongan, Eastern Samar, 6800 Tel No. (055)-560-8312 E-mail Address: Esamar.bac@gmail.com Bids And Awards Committee (bac) Invitation To Bid For Construction Of Covered Court Flooring And Cultural Stage, Brgy. San Roque, Dolores, Eastern Samar 1. The Provincial Government Of Eastern Samar, Through The 20% Edf 2025 Intends To Apply The Sum Of Two Million Thirty Seven Thousand Five Hundred Pesos Only (php2,037,500.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract Itb No. 2025-02-095 Construction Of Covered Court Flooring And Cultural Stage, Brgy. San Roque, Dolores, Eastern Samar. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Eastern Samar Now Invites Bids, Item No. B.5 – Project Billboard/signboard (1.00 Each), Item No. B.7(1) – Occupational Safety And Health Program (3.33 Month), Item No. B.9 – Mobilization/demobilization (1.00 L.s.), Item No. 801(1)b – Removal And Obstruction Of Structure (1.00 L.s.), Item No. 803(1)a – Structure Excavation (common Soil) (8.01 Cu.m.), Item No. 804(1)a – Embankment From Structure Excavation (5.01 Cu.m.), Item No. 804(1)b – Embankment From Borrow (17.06 Cu.m.), Item No. 804(4) – Gravel Fill (52.57 Cu.m.), Item No. 900(1)c2 – Structural Concrete (footings And Slab On Fill), Class A, 28 Days (53.93 Cu.m.), Item No. 900(1)c4 – Structural Concrete (columns), Class A, 28 Days (1.12 Cu.m.), Item No. 900(1)c6 – Structural Concrete (beams/girders), Class A, 28 Days (1.28 Cu.m.), Item No. 902(1)a – Reinforcing Steel (deformed), Grade 40 (2,069.81 Kg), Item No. 903(2) – Formworks And Falseworks (36.68 Sq.m.), Item No. 1046(2)a1 – Chb Non Load Bearing (including Reinforcing Steel), 100mm (38.88 Sq.m.), Item No. 1027(1) – Cement Plaster Finish (60.96 Sq.m.), Item No. 1051(1) – Railing (1.00 L.s), Item No. 1003(1)c2 – Ceiling, 6mm, Wood Frame (1.00 L.s.), Item No. 1032(1)a – Painting Works (masonry/concrete) (98.16 Sq.m.), Item No. 1032(1)b – Painting Works (wood) (42.96 Sq.m.), Item No. 1032(1)c – Painting Works (steel) (9.36 Sq.m.), Item No. 1003(5) – Roof Frame, Wood (1.00 L.s.), Item No. 1014(1)b1 – Prepainted Metal Sheets, Long Span, Corrugated Type, Above0.427mm (42.96 Sq.m.), Item No. 1013(2)a2 – Fabricated Metal Roofing Accessory (flashing, Gauge 26) (18.60 In.m.), Completion Of The Works Is Required Within 100 Calendar Days. Bidders Should Have Completed Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Seventy Five Percent (75%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From The Provincial Government Of Eastern Samar And Inspect The Bidding Documents At The Address Given Below From 8:00 Am – 5:00pm, Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of Three Thousand Pesos Only (php3,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later That The Submission Of Their Bids. 6. The Provincial Government Of Eastern Samar Will Hold A Pre-bid Conference On February 05, 2025, 10:00 A.m., At The Bids And Awards Committee Office, Capitol Building, Borongan City, Which Shall Be Open Only To All Interested Parties Who Have Purchased The Bidding Documents. 7. Bids Must Be Delivered To The Address Below On Or Before February 21, 2025, 10:00 A.m., At The Bids And Awards Committee Office, Capitol Building, Borongan City. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. The Procurement Process Will Be Conducted In Accordance With The Schedules Provided In Ra 9184 And Its Rirr For Advertisements, Receipt Of Letters Of Intent, And Issuance Of Bid Documents. 9. The Provincial Government Of Eastern Samar Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Nelson F. Cortez Chairman, Bids And Awards Committee Bids And Awards Committee Office Capitol Building, Borongan City Mobile No.09177583330 E-mail Address: Easternsamar.gov.ph Esamar.bac@gmail.com Nelson F. Cortez Bac Chairman

Details: Description Republic Of The Philippines Provincial Government Of Eastern Samar Capitol Building, Borongan, Eastern Samar, 6800 Tel No. (055)-560-8312 E-mail Address: Esamar.bac@gmail.com Bids And Awards Committee (bac) Invitation To Bid For The Procurement Of Common Laboratory Supplies Eastern Samar 1. The Provincial Government Of Eastern Samar, Through The Assistance/support To Pgo- A.o. #38-a, S. 2024 Purchase Of Medicines/drugs/medical Supplies/other Hospital Supplies Intends To Apply The Sum Of One Million One Hundred Forty-six Thousand One Hundred Fifty Pesos Only (php1,146,150.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Itb No. (gds) 2025-02-015 Procurement Of Common Laboratory Supplies, Eastern Samar. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Eastern Samar Now Invites Bids For Procurement Of Common Laboratory Supplies, Eastern Samar With The Following Items; No. Unit Item Description Qty. Total Cost 1 Box Evacuated Tubes Edta 2ml/3ml 30 54,000.00 2 Box Microtainer Edta 0.5ml 30 75,000.00 3 Box Dengue Duo, (ns1 Ag+igm/igg), (10's) 40 226,000.00 4 Box Hbsag 25 75,000.00 5 Box H. Pylori, (30's) 10 129,000.00 6 Box Urine Strips 4 Parameters 50 25,000.00 7 Box Syphilis Test Kit (30's) 10 60,500.00 8 Box Hiv Test Kit (30's) 10 109,900.00 9 Box Pregnancy Test Kit, (50's) 20 30,000.00 10 Box Glucostrips, (25's), Compatible To One Touch Glucometer Device 50 42,500.00 11 Box Glucose Strips, Autocode, (50’s) 30 40,500.00 12 Bot Wbc Diluting Fluid, 1l 15 19,500.00 13 Box Hema Quick Stain 5 55,750.00 14 Box Hepa C Test Plate (hcv), (25's) 2 3,000.00 15 Bot Normal Salt Solution 0.85%, 500ml 10 6,500.00 16 Set Abo Typing Sera (anti-a & Anti-b), 10ml, Vial 10 20,000.00 17 Vial Rh (anti-d) Typing Sera 5 7,500.00 18 Vial Liss 5 7,500.00 19 Vial Anti-human Globulin (ahg), 10ml, Vial 10 15,000.00 20 Box Micro Capillary Tube, Heparinized (10's) 10 48,000.00 21 Box Blood Lancet G23 30 13,500.00 22 Pack Urine Specimen Container 60ml, (100's), Sterile 20 20,000.00 23 Pack Specimen Cup Container For Stool 60ml, (100's), Sterile 20 20,000.00 24 Box Typhoid Rapid Test, (25’s) 5 42,500.00 Delivery Of The Goods Is Required Within 60 Calendar Days. Bidders Should Have Completed Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii Instruction To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using Non-discretionary Pass/fail Criterion As Specified In The Implementing Rules And Regulations (irr) Of Republic Act 9184 (ra 9184), Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines. 4. Interested Bidders May Obtain Further Information From The Provincial Government Of Eastern Samar And Inspect The Bidding Documents At The Address Given Below From 8:00 Am – 5:00pm, Monday To Friday. 5. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders From The Address Below And Upon Payment Of A Nonrefundable Fee For The Bidding Documents In The Amount Of One Thousand Pesos Only (php1,000.00). It May Also Be Downloaded Free Of Charge From The Website Of The Philippine Government Electronic Procurement System (philgeps), Provided That Bidders Shall Pay The Fee For The Bidding Documents Not Later That The Submission Of Their Bids. 6. The Provincial Government Of Eastern Samar Will Hold A Pre-bid Conference On February 14, 2025, 10:00 A.m., At The Bids And Awards Committee Office, Capitol Building, Borongan City, Which Shall Be Open Only To All Interested Parties Who Have Purchased The Bidding Documents. 7. Bids Must Be Delivered To The Address Below On Or Before, February 27, 2025, 10:00 A.m., At The Bids And Awards Committee Office, Capitol Building, Borongan City. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 18. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. Late Bids Shall Not Be Accepted. 8. The Procurement Process Will Be Conducted In Accordance With The Schedules Provided In Ra 9184 And Its Rirr For Advertisements, Receipt Of Letters Of Intent, And Issuance Of Bid Documents. 9. The Provincial Government Of Eastern Samar Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Nelson F. Cortez Chairman, Bids And Awards Committee Bac Office, Capitol Building Borongan City, Eastern Samar Contact No. 63-55-5608312; 09177583330 E-mail Address: Easternsamar.gov.ph Esamar.bac@gmail.com Nelson F. Cortez Bac Chairman

Details: Rfq Type Goods Goods Tools & Machinery Reference Number Gd12500632 Title Radiator Pressure Tester Description 1 Each X Radiator Pressure Tester 1 Each X Compression Tester Petrol 1 Each X Compression Tester Diesel Specification* Quotation Conditions Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Please Supply Radiator Pressure Tester Radiator And Cap Pressure Testing Kit The Radiator And Cap Pressure Testing Kit Offers A Comprehensive Solution For Diagnosing Radiator Issues, Including Leaks And Faulty Radiator Caps. With 33 Colour-coded Adaptors, This Kit Is Compatible With A Wide Range Of Vehicles, Ensuring A Secure Connection To Either The Radiator Or The Expansion Tank For Accurate Pressure Testing. It Also Provides The Capability To Test Radiator Caps For Proper Sealing. Key Features Extensive Compatibility Includes 33 Colour-coded Adaptors Designed For A Variety Of Vehicle Brands And Models. Leakage Testing Tests Radiator Caps To Ensure They Are Sealing Properly, Preventing Overheating Or Coolant Loss. Controlled Pressurization The Hand Pump Is Equipped With A Dual-reading Gauge (in Bar And Psi), Providing Precise Control Over The Pressure Settings. Quick Coupling System Ensures Quick And Secure Connections For Reduced Setup Time And Easy Operation. Safe Operation Features A Pressure Release Pin For Safely Depressurizing The System Before Detaching The Kit From The Vehicle. Radiator And Cap Pressure Testing Kit The Radiator And Cap Pressure Testing Kit Offers A Comprehensive Solution For Diagnosing Radiator Issues, Including Leaks And Faulty Radiator Caps. With 33 Colour-coded Adaptors, This Kit Is Compatible With A Wide Range Of Vehicles, Ensuring A Secure Connection To Either The Radiator Or The Expansion Tank For Accurate Pressure Testing. It Also Provides The Capability To Test Radiator Caps For Proper Sealing. Key Features Extensive Compatibility Includes 33 Colour-coded Adaptors Designed For A Variety Of Vehicle Brands And Models. Leakage Testing Tests Radiator Caps To Ensure They Are Sealing Properly, Preventing Overheating Or Coolant Loss. Controlled Pressurization The Hand Pump Is Equipped With A Dual-reading Gauge (in Bar And Psi), Providing Precise Control Over The Pressure Settings. Quick Coupling System Ensures Quick And Secure Connections For Reduced Setup Time And Easy Operation. Safe Operation Features A Pressure Release Pin For Safely Depressurizing The System Before Detaching The Kit From The Vehicle. Kit Components Hand Pump With Dual-reading Gauge For Manual Pressurization, Allowing Adjustments In Both Bar And Psi (up To 2.5 Bar). Colour-coded Adaptors 33 Adaptors For Easy Identification And Compatibility With Various Vehicle Types. Adaptor Pins (3) For Use With Adaptor 8, Accommodating Vehicles With Different Base Diameters, Including Japanese And European Models. Universal Cap Adaptors (2) Versatile Adaptors Suitable For A Variety Of Radiator Cap Types. U-piece Clamp A Durable Stainless Steel Clamp That Ensures Secure Fitting. Pneumatic Pressure Adaptor Allows For Connection To An Air Source For Automated Pressurization. Specifications Gauge Readings Dual Readings In Bar And Psi (up To 2.5 Bar). Adaptor Compatibility Fits Radiator Caps With Threads Ranging From 43mm To 62mm, Along With Various Other Sizes. Colour Coding Ensures Easy Identification Of The Correct Adaptor For Different Vehicles. Construction Made From Durable Materials To Withstand The Demands Of A Professional Workshop. * Please Supply Compression Tester Petrol Description Quickly Diagnose Problems With Pistons, Rings, And Valves Gauge Has Dual Scale With 0-300 Psi, 0-20 Kpa Easy Pressure Release Button On Side Of Tester Brass Corrosion Resistant Fittings M10x1.0 , M12x1.25 , M14x1.25 , M18x1.5 * Please Supply Compression Tester Diesel Gauge Assembly Dual Scale 3inches Dial Gauge 0-1000 Psi And 0 - 70 Bar Glow Plug Adaptors M10x1.25, M10x10, M12x1.25, M14x1.25 Dummy Injector M20x1.5 And M24x2.0 Stanadyne Dummy Outside Diameter 19 Replacement Seal And Washer Set 90-degree Elbow Quick Connector/adapter Clamp Plate Length 63.5 Width 25-hole Diameter 17 Delivery Date2025/03/12 Delivery Tosupport Services Suse Delivery Address0000 Suse, Cape Town Contact Personmdevajee Telephone Number0822247058 Cell Number Closing Date2025/02/25 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgd1.quotations@capetown.gov.za Buyer Detailsa.filby Buyer Phone0214009269 Attachments No Attachments Note This Commodity Has Gone Live For Only Quoting On The E-procurement Portal. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Medical Equipment, Accessories & Supplie Reference Number Gn12500326 Title Iso Media For Daphnia Magna Test Kit Selenastrum Growth Media For Algal Tests Description 15 Each X Iso Media For Daphnia Magna Test Kit 10 Each X Selenastrum Growth Media For Algal Tests 10 Each X Selenastrum Growth Media For Algal Tests Specification* Iso Media For Daphnia Magna Test Kit Specifications All Products Must Be Compatible With The Microbiotests Toxkit. # Concentrated Salt Solutions For Daphnia Test Kit This Must Be Compatible With The Microbiotests Toxkit. Each Containing Two Sets Of 4 Small Glass Bottles, Each Containing A Concentrated Solution Of One Salt, To Make Up 2 X 2 Litres Standard Freshwater (iso Medium, Formula According To Iso 6341) With Deionized Or Distilled Water, For Preparation Of The Hatching And Toxicant Dilution Medium. Composition Vial 1 Nahco3 (129.5 Mg - Dissolved In 2 L. = 64.75 Mg/l) Vial 2 Cacl2.2h2o (588 Mg - Dissolved In 2 L. = 294 Mg/l) Vial 3 Mgso4.7h2o (246.5 Mg - Dissolved In 2 L. = 123.25 Mg/l) Vial 4 Kcl (11.5 Mg - Dissolved In 2 L. = 5.75 Mg/l) #concentrated Selenastrum Growth Medium For Algal Tests Kit And Nutrient Stock A For Freshwater Algal Tests Each Containing Five Glass Bottles Containing Concentrated Solutions Of Various Chemicals To Make Up 2 Litres Of Algal Culturing Medium With Deionized Water, According To The Formula Of The Oecd Guideline 201 "alga, Growth Inhibition Test" And The Iso/dis Guideline 8692 "water Quality - Freshwater Algal Growth Inhibition Tests With Unicellular Green Algae". The Vials Should Be Stored In The Refrigerator At 5°c (+/- 2° C) In Darkness Until Use. Contact Person Michelle Lamprecht Contact Numbers 021 444 9144 Email Address Michelle.lamprecht@capetown.gov.za * Selenastrum Growth Media For Algal Tests Kit Specifications All Products Must Be Compatible With The Microbiotests Toxkit. # Concentrated Salt Solutions For Daphnia Test Kit This Must Be Compatible With The Microbiotests Toxkit. Each Containing Two Sets Of 4 Small Glass Bottles, Each Containing A Concentrated Solution Of One Salt, To Make Up 2 X 2 Litres Standard Freshwater (iso Medium, Formula According To Iso 6341) With Deionized Or Distilled Water, For Preparation Of The Hatching And Toxicant Dilution Medium. Composition Vial 1 Nahco3 (129.5 Mg - Dissolved In 2 L. = 64.75 Mg/l) Vial 2 Cacl2.2h2o (588 Mg - Dissolved In 2 L. = 294 Mg/l) Vial 3 Mgso4.7h2o (246.5 Mg - Dissolved In 2 L. = 123.25 Mg/l) Vial 4 Kcl (11.5 Mg - Dissolved In 2 L. = 5.75 Mg/l) #concentrated Selenastrum Growth Medium For Algal Tests Kit And Nutrient Stock A For Freshwater Algal Tests Each Containing Five Glass Bottles Containing Concentrated Solutions Of Various Chemicals To Make Up 2 Litres Of Algal Culturing Medium With Deionized Water, According To The Formula Of The Oecd Guideline 201 "alga, Growth Inhibition Test" And The Iso/dis Guideline 8692 "water Quality - Freshwater Algal Growth Inhibition Tests With Unicellular Green Algae". The Vials Should Be Stored In The Refrigerator At 5°c (+/- 2° C) In Darkness Until Use. Contact Person Michelle Lamprecht Contact Numbers 021 444 9144 Email Address Michelle.lamprecht@capetown.gov.za * Nutrient Stock A For Freshwater Algal Tests Kit Specifications All Products Must Be Compatible With The Microbiotests Toxkit. # Concentrated Salt Solutions For Daphnia Test Kit This Must Be Compatible With The Microbiotests Toxkit. Each Containing Two Sets Of 4 Small Glass Bottles, Each Containing A Concentrated Solution Of One Salt, To Make Up 2 X 2 Litres Standard Freshwater (iso Medium, Formula According To Iso 6341) With Deionized Or Distilled Water, For Preparation Of The Hatching And Toxicant Dilution Medium. Composition Vial 1 Nahco3 (129.5 Mg - Dissolved In 2 L. = 64.75 Mg/l) Vial 2 Cacl2.2h2o (588 Mg - Dissolved In 2 L. = 294 Mg/l) Vial 3 Mgso4.7h2o (246.5 Mg - Dissolved In 2 L. = 123.25 Mg/l) Vial 4 Kcl (11.5 Mg - Dissolved In 2 L. = 5.75 Mg/l) #concentrated Selenastrum Growth Medium For Algal Tests Kit And Nutrient Stock A For Freshwater Algal Tests Each Containing Five Glass Bottles Containing Concentrated Solutions Of Various Chemicals To Make Up 2 Litres Of Algal Culturing Medium With Deionized Water, According To The Formula Of The Oecd Guideline 201 "alga, Growth Inhibition Test" And The Iso/dis Guideline 8692 "water Quality - Freshwater Algal Growth Inhibition Tests With Unicellular Green Algae". The Vials Should Be Stored In The Refrigerator At 5°c (+/- 2° C) In Darkness Until Use. Contact Person Michelle Lamprecht Contact Numbers 021 444 9144 Email Address Michelle.lamprecht@capetown.gov.za Delivery Date2025/03/20 Delivery Tomichelle Lamprecht Scientific Services Delivery Address7764 Off Jan Smuts Drive ,athlone, Cape Town Contact Personmichelle Lamprecht Telephone Number02144491444 Cell Number Closing Date2025/02/12 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgn1.quotations@capetown.gov.za Buyer Detailsn.mtati Buyer Phone0214006739 Attachments No Attachments Note This Commodity Has Gone On E-procurement Which Means That No Manual Submissions Will Be Accepted For This Commodity, Only Online Bids Will Be Accepted. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.