Advertisement Tenders

Details: This Requirement Is Advertised As Sole Source. The Notice Is Published For Information Purposes Only And Is Not A Request For Competitive Proposals. This Acquisition Is Being Pursued On A Sole Source Basis Under The Statutory Authority Of Title 10, U.s.c. Section 2304(c) (1), As Implemented By Federal Acquisition Regulation (far) 6.302-1, "only One Responsible Source And No Other Supplies Or Services Will Satisfy Agency Requirements." A Determination By The Government Not To Compete This Effort Is Solely Within The Discretion Of The Government. The Government Will Not Pay For Any Information Received. this Announcement Constitutes The Only Solicitation, And A Written Solicitation Will Not Be Issued. The Government Will Consider Other Bids. This Requirement Is Being Synopsized As A Small Business Set Aside Under The North American Industry Classification System (naics) Code 334220, And Psc Code 1680. ****note: The Required Fill-in Provisions 52.204-24 And 52.204-26 Attached To This Post Must Be Filled In And Returned With Your Quote To Be Considered For Award. **** the Naval Air Warfare Center- Aircraft Division (nawcad) At Patuxent River, Md Announces Its Intention To Procure, On A Sole Source (ss) Basis To Acutronic Usa, Inc., 700 Waterfront Drive, Pittsburgh, Pennsylvania 15222-4742. the Contractor Shall Provide: quantity Of One (1) Impulse™ Gl1™ One-axis Rate Table, Installation And Performance Verification. please See Attached Statement Of Work For Specifications. the Anticipated Delivery Is On Or Before One Hundred Eighty (180) Days After Receipt Of The Order (aro). delivery Address: attn: Mark Jordan vx23 Hangar 115, 22080 Elmer Road, Patuxent River, Md 20670. this Is A Firm-fixed Price Procurement; Therefore, The Offeror's Initial Offer Should Represent The Vendor's Best Quote In Terms Of Price And Acceptability. shipping Charges: Fob Destination. 20670. contracting Office Address: 21983 Bundy Road, Building 441 Patuxent River, Md 20670 technical Acceptability Will Be Determined Solely On The Content And Merit Of The Information Submitted In Response To This Synopsis/solicitation. Therefore, It Is Incumbent On The Offeror To Provide Sufficient Technical Literature, Documentation, Etc. For The Government To Make An Adequate Technical Assessment Of The Proposal. A Firm Fixed Price Contract Is Anticipated. The Provision At 52.212-1, Instructions To Offerors-commercial Items, (deviation 2018-o0018) Is Incorporated By Reference And Applies To This Acquisition. The Provision At 52.212-2 Evaluation – Commercial Items (oct 2014) Applies To This Acquisition. The Government Will Award In Accordance With Far Part 12 On A Lowest Priced, Technically Acceptable Basis. The Offeror Shall Provide Backup Information Verifying The Price Offered, E.g., A Copy Of Current Catalog, Invoices For The Same Equipment, Etc. Each Offeror Shall Include A Completed Copy Of The Provision At Far 52.212-3 Offeror Representations And Certifications – Commercial Items (mar 2020) With Its Quote. Far 52.247-34 F.o.b. Destination (nov 1991) Is Incorporated By Reference And Applies To This Acquisition. Far 52.212-4 Contract Terms And Conditions – Commercial Items (oct 2018) Is Incorporated By Reference And Applies To This Acquisition. The Clause At 52.212-5 Contract Terms And Conditions Required To Implement Statutes Or Executive Orders – Commercial Items (deviation 2018-o0021) Is Incorporated By Reference. 52.204-27 Prohibition On A Bytedance Covered Application (jun 2023) (a) Definitions. As Used In This Clause-- covered Application Means The Social Networking Service Tiktok Or Any Successor Application Or Service Developed Or Provided By Bytedance Limited Or An Entity Owned By Bytedance Limited. information Technology, As Defined In 40 U.s.c. 11101(6)-- (1) Means Any Equipment Or Interconnected System Or Subsystem Of Equipment, Used In The Automatic Acquisition, Storage, Analysis, Evaluation, Manipulation, Management, Movement, Control, Display, Switching, Interchange, Transmission, Or Reception Of Data Or Information By The Executive Agency, If The Equipment Is Used By The Executive Agency Directly Or Is Used By A Contractor Under A Contract With The Executive Agency That Requires The Use- (i) Of That Equipment; Or (ii) Of That Equipment To A Significant Extent In The Performance Of A Service Or The Furnishing Of A Product; (2) Includes Computers, Ancillary Equipment (including Imaging Peripherals, Input, Output, And Storage Devices Necessary For Security And Surveillance), Peripheral Equipment Designed To Be Controlled By The Central Processing Unit Of A Computer, Software, Firmware And Similar Procedures, Services (including Support Services), And Related Resources; But (3) Does Not Include Any Equipment Acquired By A Federal Contractor Incidental To A Federal Contract. (b) Prohibition. Section 102 Of Division R Of The Consolidated Appropriations Act, 2023 (pub. L. 117-328), The No Tiktok On Government Devices Act, And Its Implementing Guidance Under Office Of Management And Budget (omb) Memorandum M-23-13, Dated February 27, 2023, "no Tiktok On Government Devices" Implementation Guidance, Collectively Prohibit The Presence Or Use Of A Covered Application On Executive Agency Information Technology, Including Certain Equipment Used By Federal Contractors. The Contractor Is Prohibited From Having Or Using A Covered Application On Any Information Technology Owned Or Managed By The Government, Or On Any Information Technology Used Or Provided By The Contractor Under This Contract, Including Equipment Provided By The Contractor's Employees; However, This Prohibition Does Not Apply If The Contracting Officer Provides Written Notification To The Contractor That An Exception Has Been Granted In Accordance With Omb Memorandum M-23-13. (c) Subcontracts. The Contractor Shall Insert The Substance Of This Clause, Including This Paragraph (c), In All Subcontracts, Including Subcontracts For The Acquisition Of Commercial Products Or Commercial Services. (end Of Clause). quotes Are Due To Shannon Canada, Purchasing Agent, At Shannon.m.canada.civ@us.navy.mil. please Provide The Following Information With Your Quote: cage Code: uei #: payment Terms Of Net 30. pricing - Are These Items On A Commercial Published, On-line, Or Internal Price List. if Available On A Price List Provide A Copy. All Price Listings Will Be Kept Confidential. if Not Available On A Price List Please Provide Information On How Pricing Is Determined (example: Item Cost+ %, Labor Rate And Materials, Etc.) estimated Delivery Date Or Period Of Performance: invoicing And Payment Will Be Made Thru Wide Area Workflow (wawf), Terms: Net 30. As Of October 1, 2007, It Became Mandatory To Be Registered To Process Any Government Procurement. If You Are Not Registered, Please Take A Moment To Do So At Https://wawf.eb.mil/.

Details: This Requirement Is Advertised As Sole Source. The Notice Is Published For Information Purposes Only And Is Not A Request For Competitive Proposals. This Acquisition Is Being Pursued On A Sole Source Basis Under The Statutory Authority Of Title 10, U.s.c. Section 2304(c) (1), As Implemented By Federal Acquisition Regulation (far) 6.302-1, "only One Responsible Source And No Other Supplies Or Services Will Satisfy Agency Requirements." A Determination By The Government Not To Compete This Effort Is Solely Within The Discretion Of The Government. The Government Will Not Pay For Any Information Received. this Announcement Constitutes The Only Solicitation, And A Written Solicitation Will Not Be Issued. The Government Will Consider Other Bids. This Requirement Is Being Synopsized As A Small Business Set Aside Under The North American Industry Classification System (naics) Code 611512, And Psc Code U099. ****note: The Required Fill-in Provisions 52.204-24 And 52.204-26 Attached To This Post Must Be Filled In And Returned With Your Quote To Be Considered For Award. **** the Naval Air Warfare Center- Aircraft Division (nawcad) At Patuxent River, Md Announces Its Intention To Procure, On A Sole Source (ss) Basis To Aurora Flight Science Corporation, 9950 Wakeman Drive, Manassas, Virginia 20110-2702. In Support The U.s. Naval Test Pilot School Qualitative Evaluation Program. the Contractor Shall Provide: 1. Flight Hours In The Centaur Aircraft, Qty 5 please See Attached Statement Of Work. the Anticipated Period Of Performance Is 03 March 2025 Through 31 March 2025. this Is A Firm-fixed Price Procurement; Therefore, The Offeror's Initial Offer Should Represent The Vendor's Best Quote In Terms Of Price And Acceptability. shipping Charges: Does Not Apply. contracting Office Address: 21983 Bundy Road, Building 441 Patuxent River, Md 20670 technical Acceptability Will Be Determined Solely On The Content And Merit Of The Information Submitted In Response To This Synopsis/solicitation. Therefore, It Is Incumbent On The Offeror To Provide Sufficient Technical Literature, Documentation, Etc. For The Government To Make An Adequate Technical Assessment Of The Proposal. A Firm Fixed Price Contract Is Anticipated. The Provision At 52.212-1, Instructions To Offerors-commercial Items, (deviation 2018-o0018) Is Incorporated By Reference And Applies To This Acquisition. The Provision At 52.212-2 Evaluation – Commercial Items (oct 2014) Applies To This Acquisition. The Government Will Award In Accordance With Far Part 12 On A Lowest Priced, Technically Acceptable Basis. The Offeror Shall Provide Backup Information Verifying The Price Offered, E.g., A Copy Of Current Catalog, Invoices For The Same Equipment, Etc. Each Offeror Shall Include A Completed Copy Of The Provision At Far 52.212-3 Offeror Representations And Certifications – Commercial Items (mar 2020) With Its Quote. Far 52.247-34 F.o.b. Destination (nov 1991) Is Incorporated By Reference And Applies To This Acquisition. Far 52.212-4 Contract Terms And Conditions – Commercial Items (oct 2018) Is Incorporated By Reference And Applies To This Acquisition. The Clause At 52.212-5 Contract Terms And Conditions Required To Implement Statutes Or Executive Orders – Commercial Items (deviation 2018-o0021) Is Incorporated By Reference. 52.204-27 Prohibition On A Bytedance Covered Application (jun 2023) (a) Definitions. As Used In This Clause-- covered Application Means The Social Networking Service Tiktok Or Any Successor Application Or Service Developed Or Provided By Bytedance Limited Or An Entity Owned By Bytedance Limited. information Technology, As Defined In 40 U.s.c. 11101(6)-- (1) Means Any Equipment Or Interconnected System Or Subsystem Of Equipment, Used In The Automatic Acquisition, Storage, Analysis, Evaluation, Manipulation, Management, Movement, Control, Display, Switching, Interchange, Transmission, Or Reception Of Data Or Information By The Executive Agency, If The Equipment Is Used By The Executive Agency Directly Or Is Used By A Contractor Under A Contract With The Executive Agency That Requires The Use- (i) Of That Equipment; Or (ii) Of That Equipment To A Significant Extent In The Performance Of A Service Or The Furnishing Of A Product; (2) Includes Computers, Ancillary Equipment (including Imaging Peripherals, Input, Output, And Storage Devices Necessary For Security And Surveillance), Peripheral Equipment Designed To Be Controlled By The Central Processing Unit Of A Computer, Software, Firmware And Similar Procedures, Services (including Support Services), And Related Resources; But (3) Does Not Include Any Equipment Acquired By A Federal Contractor Incidental To A Federal Contract. (b) Prohibition. Section 102 Of Division R Of The Consolidated Appropriations Act, 2023 (pub. L. 117-328), The No Tiktok On Government Devices Act, And Its Implementing Guidance Under Office Of Management And Budget (omb) Memorandum M-23-13, Dated February 27, 2023, "no Tiktok On Government Devices" Implementation Guidance, Collectively Prohibit The Presence Or Use Of A Covered Application On Executive Agency Information Technology, Including Certain Equipment Used By Federal Contractors. The Contractor Is Prohibited From Having Or Using A Covered Application On Any Information Technology Owned Or Managed By The Government, Or On Any Information Technology Used Or Provided By The Contractor Under This Contract, Including Equipment Provided By The Contractor's Employees; However, This Prohibition Does Not Apply If The Contracting Officer Provides Written Notification To The Contractor That An Exception Has Been Granted In Accordance With Omb Memorandum M-23-13. (c) Subcontracts. The Contractor Shall Insert The Substance Of This Clause, Including This Paragraph (c), In All Subcontracts, Including Subcontracts For The Acquisition Of Commercial Products Or Commercial Services. (end Of Clause). quotes Are Due To Shannon Canada, Purchasing Agent, At Shannon.m.canada.civ@us.navy.mil. please Provide The Following Information With Your Quote: cage Code: uei #: payment Terms Of Net 30. pricing - Are These Items On A Commercial Published, On-line, Or Internal Price List. if Available On A Price List Provide A Copy. All Price Listings Will Be Kept Confidential. if Not Available On A Price List Please Provide Information On How Pricing Is Determined (example: Item Cost+ %, Labor Rate And Materials, Etc.) estimated Period Of Performance: 03 March 2025 Through 31 March 2025 invoicing And Payment Will Be Made Thru Wide Area Workflow (wawf), Terms: Net 30. As Of October 1, 2007, It Became Mandatory To Be Registered To Process Any Government Procurement. If You Are Not Registered, Please Take A Moment To Do So At Https://wawf.eb.mil/.

Details: Public Notice Soq 25-004 Routine Engineering Services For Streets Projects (supplemental) The Parish Of Jefferson, Authorized By Resolution No. 145518 Is Hereby Soliciting Statements Of Qualifications (jefferson Parish Technical Evaluation Committee (tec) Professional Services Questionnaire) For Additional Persons Or Firms Interested In Providing Routine Engineering Services For Streets Projects In Jefferson Parish, Who Are Not One Of The Fifty-four (54) Persons Or Firms Approved By Resolution No. 144993, Dated September 25, 2024. Routine Engineering Services Are For Contracts Where The Total Engineering Fee, Exclusive Of Resident Inspection Services, Will Not Exceed $500,000.00 Per Assignment. Firms Deemed Qualified For This Work Shall Be Eligible For Award Of Routine Streets Contracts For The Remainder Of The Two-year Period Beginning September 25, 2024. Deadline For Submissions: 3:30 P.m. On February 21, 2025 The Following Criteria Will Be Used To Evaluate The Statement Of The Firms Submitting: 1) Professional Training And Experience In Relation To The Type Of Work Required For The Routine Engineering Services - 35 Points; 2) Size Of Firm, Considering The Number Of Professional And Support Personnel Required To Perform The Type Of Routine Engineering Tasks, Including Project Evaluation, Project Design, Drafting Of Technical Plans, Development Of Technical Specifications And Construction Administration – 10 Points; 3) Capacity For Timely Completion Of Newly Assigned Work, Considering The Factors Of Type Of Routine Engineering Task, Current Unfinished Workload, And Person Or Firm’s Available Professional And Support Personnel - 20 Points; 4) Past Performance By Person Or Firm On Parish Contracts - 10 Points (assertions Of Fault By A Person Or Firm, Which Shall Include Time Delays, Cost Over-runs, And Or Design Inadequacies In Prior Work Completed For The Parish Shall Be Evidenced By Substantiating Documentation Provided By The Director Of Public Works For The Requesting Department Or The Director Of Engineering And Received By The Chairman Of The Evaluation Committee A Minimum Of Two (2) Weeks Prior To The Scheduled Date Of The Technical Evaluation Committee Meeting.). 5) Location Of The Principal Office - 15 Points (preference Shall Be Given To Persons Or Firms With A Principal Business Office As Follows: (a) Jefferson Parish, Including Municipalities Located Within Jefferson Parish (15 Points); (b) Neighboring Parishes Of The Greater New Orleans Metropolitan Region, Which Includes Orleans, Plaquemines, St. Bernard, St. Charles And St. Tammany Parishes (12 Points); (c) Parishes Other Than The Foregoing (10 Points); (d) Outside The State Of Louisiana (6 Points).); 6) Adversarial Legal Proceedings Between The Parish And The Person Or Firm Performing Professional Services, In Which The Parish Prevailed Or Any Ongoing Adversarial Legal Proceedings Between The Parish And The Person Or Firm Performing Professional Services Excluding Those Instances Or Cases Where The Person Or Firm Was Added As An Indispensable Party, Or Where The Person Or Firm Participated In Or Assisted The Public Entity In Prosecution Of Its Claim - 15 Points (in The Event That The Person Or Firm Fails To Provide Accurate And Detailed Information Regarding Legal Proceedings With The Parish, Including The Absence Of Legal Proceedings, The Person Or Firm Shall Be Deemed Unresponsive With Regard To This Category, And Zero (0) Points Shall Be Awarded.); 7) Prior Successful Completion Of Projects Of The Type And Nature Of Routine Engineering Services, As Defined, For Which Firm Has Provided Verifiable References - 5 Points; The Person Or Firm Submitting A Statement Of Qualifications Shall Have The Following Minimum Qualifications: One Principal Who Is A Professional Engineer Who Shall Be Registered As Such In Louisiana A Professional In Charge Of The Project Who Is A Professional Engineer Who Shall Be Registered As Such In Louisiana With A Minimum Of Five (5) Years’ Experience In The Disciplines Involved One Employee Who Is A Professional Engineer Registered As Such In Louisiana In The Field Or Fields Of Expertise Required For The Project (a Sub-consultant May Meet The Requirement Only If The Advertised Project Involves More Than One Discipline.) With Regard To The Questionnaire, Principal Means The Sole Proprietor Of The Firm, Or One Who Shares An Ownership Interest With Other Persons In The Firm, Including But Not Limited To, A Partner In A Partnership, A Shareholder In A Corporation, Or A Member Of A Limited Liability Corporation. Each Firm’s Lowest And Highest Score Shall Be Dropped And Not Count Towards The Firm’s Score. Only Those Persons Or Firms Receiving An Overall Cumulative Score Of At Least Seventy (70) Percent Or Greater, Of The Total Possible Points For All Categories To Be Assigned By The Participating Technical Evaluation Committee Members Shall Be Deemed Qualified To Perform Architectural, Engineering, Surveying, And Laboratory And Field Services Tasks. The Estimated Fees For This Work May Vary Among Different Assignments; However, No Individual Assignment Can Have A Fee Exceeding $500,000.00, Exclusive Of Resident Inspection Services. There Is No Limit To The Number Of Assignments That Can Be Awarded To A Person Or Firm. The Person Or Firm Submitting A Statement Of Qualification (jefferson Parish Technical Evaluation Committee (tec) Professional Services Questionnaire) Must Identify All Subcontractors Who Will Assist In Providing Professional Services For The Project, In The Professional Services Questionnaire. Each Subcontractor Shall Be Required To Submit A (jefferson Parish Technical Evaluation Committee (tec) Professional Services Questionnaire) And All Documents And Information Included In The Questionnaire. (refer To Jefferson Parish Code Ordinance, Section 2-928) All Persons Or Firms (including Subcontractors) Must Submit A Statement Of Qualifications (jefferson Parish Technical Evaluation Committee (tec) Professional Services Questionnaire) By The Deadline. The Latest Professional Services Questionnaire May Be Obtained By Contacting The Purchasing Department At (504) 364-2678 Or Via The Jefferson Parish Website At Https://www.jeffparish.gov/27/government. This Questionnaire Can Be Accessed By Clicking On The + Next To “doing Business In Jefferson Parish” On The Website And Clicking On “professional Services Questionnaires”. Submissions Will Only Be Accepted Electronically Via Jefferson Parish’s E-procurement Site, Central Bidding At Www.centralauctionhouse.com Or Www.jeffparishbids.net. Registration Is Required And Free For Jefferson Parish Vendors By Accessing The Following Link: Www.centralauctionhouse.com/registration.php. No Submittals Will Be Accepted After The Deadline. Affidavits Are Not Required To Be Submitted With The Statement Of Qualifications, But Shall Be Submitted Prior To Contract Approval. Insurances Are Not Required To Be Submitted With The Statement Of Qualifications, But Shall Be Submitted Prior To Contract Approval. Disputes/protests Relating To The Decisions By The Evaluation Committee Or By The Jefferson Parish Council Shall Be Brought Before The 24th Judicial Court. Adv: The New Orleans Advocate: January 8, 15 And 22, 2025

Details: Description Republic Of The Philippines Province Of Leyte Municipality Of La Paz Office Of The Bids And Awards Committee Invitation To Bid (itb) – No. : 25 - 0001 Procuring Entity : Municipality Of La Paz, Leyte Title Of Project : Road Concreting Of San Victoray – Bongtod – Quiong – Bagacay West Approved Budget Of The Contract (abc) : Php 3,000,000.00 Address : Brgy. San Victoray & Bongtod, La Paz, Leyte Description: The Municipal Government Of La Paz, Leyte Through The Bids And Awards Committee (bac) Invites Contractors For The Road Concreting Of San Victoray – Bongtod – Quiong – Bagacay West With An Approved Budget For The Contract Amounting To Three Million Pesos (php3,000,000.00) Only. A.the Bids And Awards Committee Will Use A Non-discretionary Pass/fail Criterion In The Eligibility Check/screening As Well As In The Preliminary Examination Of Bids. B.eligibility Documents In Four (4) Copies Duly Certified On Each Page Must Be Submitted To The Office Of The Bac, G/f La Paz Town Hall, Lgu – La Paz Leyte. The Eligibility Documents Are The Following: 1.technical Component Envelope (first Envelope) Class “a” Documents A.legal Documents: A)valid Philgeps Registration Certificate (platinum Membership) (all Pages); Or B)registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document; And C)mayor’s Of Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidders Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And D)tax Clearance Per Executive Order 398, Series Of 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). B.technical Documents E)statement Of Prospective Bidder Of All Its Ongoing And Completed Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contracts To Bid; And F)statement Of The Bidders’ Single Largest Completed Contract (slcc) Similar To The Contract To Bid, Except Under Conditions Provided Under The Rules; And G)latest/valid Philippine Contractors Accreditation Board (pcab) License; Or Special Pcab License In Case Of Joint Ventures; And Registration For The Type And Cost Of The Contract To Be Bid; And H)original Copy Of Notarized Bid Securing Declaration; And I)project Requirements, Which Shall Include The Following: A.organizational Chart For The Contract To Be Bid; B.list Of Contractor’s Personnel (e.g. Project Manager, Project Engineers, Materials Engineers, And Foremen), To Be Assigned To The Contract To Be Bid, With Their Complete Qualification And Experience Data; C.list Of Contractor’s Major Equipment Which Are Owned, Leased, And/or Under Purchase Agreements, Supported By Proof Of Ownership Or Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project, As The Case May Be; And J)original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation Partnership, Or Cooperative; Or Original Special Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. C.financial Documents K)the Prospective Bidder’s Audited Financial Statement, Showing Among Others, The Prospective Bidder’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And L)the Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc). Class “b” Documents M)if Applicable, Duly Signed Joint Venture Agreement (jva) In Accordance With Ra No. 4566 And Its Irr In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. 2.financial Component Envelope (second Envelope) N)original Of Duly Signed And Accomplished Financial Bid Form; And Other Documentary Requirements Under Ra No. 9184 O)original Of Duly Signed Bid Prices In The Bill Of Quantities; And P)duly Accomplished Detailed Estimated Form, Including A Summary Sheet Indicating The Unit Prices Of Construction Materials, Labor Rates, And Equipment Rental Used In Coming Up With The Bid; And Q)cash Flow By Quarter C.the Municipality Of La Paz, Leyte Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. The Significant Date & Time Of The Procurement Activities Are Shown Below: 1.advertising / Posting Of Itb : Jan. 15 – Feb. 4, 2025 @ 5:00 Pm 2.expression Of Interest / Submission Of Loi : Jan. 15 – 22, 2025 @ 5:00 Pm Note: •company Representative/agent Must Bring A Valid & Latest Company Id Duly Signed By The Owner/proprietor/manager •spa For The Representative/agent Given By The Owner/proprietor/manager Specific To The Particular Project. •submit Certified/authenticated True Copy Of Class “a” (legal Documents) For The Pre-qualification & Shortlisting. •site Inspection Shall Commence Only After The Submission Of Class “a” (legal Documents) As Scheduled By The Office Of The Municipal Engineer Is On Jan. 22, 2025 @ 1:00 Pm 3.issuance And Availability Of Bidding Docs. : Jan. 23 – Feb. 4, 2025 @ 5:00 Pm •amount Of Bidding Documents: Php 5,000.00 •issuance Of Bidding Documents Is From 9:00 Am To 4:00 Pm 4.pre-bid Conference : January 23, 2025 @ 9:00 Am Note: •only Pre-qualified & Short-listed Bidders Are Invited To Attend The Pre-bid Conference. 5.deadline For Submission Of Bids: February 4, 2025 At 5:00 Pm @ Bac Office Note: •only Pre-qualified & Short-listed Bidders Who Attended The Pre-bid Conference Are Allowed To Buy The Bidding Documents & Submit A Bid And Have Conducted A Site Inspection As Scheduled By The Office Of The Municipal Engineer. 6.opening Of Bids: February 5, 2025 @ 9:00 Am @ Bac Office Created By: Mrs. Jennifer M. Ramos Bac Secretary (sgd.) Marlon L. Eslopor Bac Chairperson

Details: Description Republic Of The Philippines Province Of Leyte Municipality Of La Paz Office Of The Bids And Awards Committee Invitation To Bid (itb) – No. : 25 - 0002 Procuring Entity : Municipality Of La Paz, Leyte Title Of Project : Road Concreting Of Brgy. Cagngaran – Canbañez Road Approved Budget Of The Contract (abc) : Php 3,000,000.00 Address : Brgy. Canbañez, La Paz, Leyte Description: The Municipal Government Of La Paz, Leyte Through The Bids And Awards Committee (bac) Invites Contractors For The Road Concreting Of Brgy. Cagngaran – Canbañez Road With An Approved Budget For The Contract Amounting To Three Million Pesos (php3,000,000.00) Only. A.the Bids And Awards Committee Will Use A Non-discretionary Pass/fail Criterion In The Eligibility Check/screening As Well As In The Preliminary Examination Of Bids. B.eligibility Documents In Four (4) Copies Duly Certified On Each Page Must Be Submitted To The Office Of The Bac, G/f La Paz Town Hall, Lgu – La Paz Leyte. The Eligibility Documents Are The Following: 1.technical Component Envelope (first Envelope) Class “a” Documents A.legal Documents: A)valid Philgeps Registration Certificate (platinum Membership) (all Pages); Or B)registration Certificate From Securities And Exchange Commission (sec), Department Of Trade And Industry (dti) For Sole Proprietorship, Or Cooperative Development Authority (cda) For Cooperatives Or Its Equivalent Document; And C)mayor’s Of Business Permit Issued By The City Or Municipality Where The Principal Place Of Business Of The Prospective Bidders Is Located, Or The Equivalent Document For Exclusive Economic Zones Or Areas; And D)tax Clearance Per Executive Order 398, Series Of 2005, As Finally Reviewed And Approved By The Bureau Of Internal Revenue (bir). B.technical Document E)statement Of Prospective Bidder Of All Its Ongoing And Completed Government And Private Contracts, Including Contracts Awarded But Not Yet Started, If Any, Whether Similar Or Not Similar In Nature And Complexity To The Contracts To Bid; And F)statement Of The Bidders’ Single Largest Completed Contract (slcc) Similar To The Contract To Bid, Except Under Conditions Provided Under The Rules; And G)latest/valid Philippine Contractors Accreditation Board (pcab) License; Or Special Pcab License In Case Of Joint Ventures; And Registration For The Type And Cost Of The Contract To Be Bid; And H)original Copy Of Notarized Bid Securing Declaration; And I)project Requirements, Which Shall Include The Following: A.organizational Chart For The Contract To Be Bid; B.list Of Contractor’s Personnel (e.g. Project Manager, Project Engineers, Materials Engineers, And Foremen), To Be Assigned To The Contract To Be Bid, With Their Complete Qualification And Experience Data; C.list Of Contractor’s Major Equipment Which Are Owned, Leased, And/or Under Purchase Agreements, Supported By Proof Of Ownership Or Certification Of Availability Of Equipment From The Equipment Lessor/vendor For The Duration Of The Project, As The Case May Be; And J)original Duly Signed Omnibus Sworn Statement (oss); And If Applicable, Original Notarized Secretary’s Certificate In Case Of A Corporation Partnership, Or Cooperative; Or Original Special Of Attorney Of All Members Of The Joint Venture Giving Full Power And Authority To Its Officer To Sign The Oss And Do Acts To Represent The Bidder. C.financial Documents K)the Prospective Bidder’s Audited Financial Statement, Showing Among Others, The Prospective Bidder’s Total And Current Assets And Liabilities, Stamped “received” By The Bir Or Its Duly Accredited And Authorized Institutions, For The Preceding Calendar Year Which Should Not Be Earlier Than Two (2) Years From The Date Of Bid Submission; And L)the Prospective Bidder’s Computation Of Net Financial Contracting Capacity (nfcc). Class “b” Documents M)if Applicable, Duly Signed Joint Venture Agreement (jva) In Accordance With Ra No. 4566 And Its Irr In Case The Joint Venture Is Already In Existence; Or Duly Notarized Statements From All The Potential Joint Venture Partners Stating That They Will Enter Into And Abide By The Provisions Of The Jva In The Instance That The Bid Is Successful. 2.financial Component Envelope (second Envelope) N)original Of Duly Signed And Accomplished Financial Bid Form; And Other Documentary Requirements Under Ra No. 9184 O)original Of Duly Signed Bid Prices In The Bill Of Quantities; And P)duly Accomplished Detailed Estimated Form, Including A Summary Sheet Indicating The Unit Prices Of Construction Materials, Labor Rates, And Equipment Rental Used In Coming Up With The Bid; And Q)cash Flow By Quarter C.the Municipality Of La Paz, Leyte Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, And To Reject All Bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. The Significant Date & Time Of The Procurement Activities Are Shown Below: 1.advertising / Posting Of Itb : Jan. 22 – Feb. 12, 2025 @ 5:00 Pm 2.expression Of Interest / Submission Of Loi : Jan. 22 – 30, 2025 @ 12:00 Pm Note: •company Representative/agent Must Bring A Valid & Latest Company Id Duly Signed By The Owner/proprietor/manager •spa For The Representative/agent Given By The Owner/proprietor/manager Specific To The Particular Project. •submit Certified/authenticated True Copy Of Class “a” (legal Documents) For The Pre-qualification & Shortlisting. •site Inspection Shall Commence Only After The Submission Of Class “a” (legal Documents) As Scheduled By The Office Of The Municipal Engineer On Jan. 30, 2025 @ 1:00 Pm 3.issuance And Availability Of Bidding Docs. : Jan. 31 – Feb. 12, 2025 @ 5:00 Pm •amount Of Bidding Documents: Php 5,000.00 •issuance Of Bidding Documents Is From 9:00 Am To 4:00 Pm 4.pre-bid Conference : January 31, 2025 @ 9:00 Am Note: •only Pre-qualified & Short-listed Bidders Are Invited To Attend The Pre-bid Conference. 5.deadline For Submission Of Bids: February 12, 2025 At 5:00 Pm @ Bac Office Note: •only Pre-qualified & Short-listed Bidders Who Attended The Pre-bid Conference Are Allowed To Buy The Bidding Documents & Submit A Bid And Have Conducted A Site Inspection As Scheduled By The Office Of The Municipal Engineer. 6.opening Of Bids: February 13, 2025 @ 9:00 Am @ Bac Office Created By: Mrs. Jennifer M. Ramos Bac Secretary (sgd.) Marlon L. Eslopor Bac Chairperson

Details: This Requirement Is Advertised As Sole Source. The Notice Is Published For Information Purposes Only And Is Not A Request For Competitive Proposals. This Acquisition Is Being Pursued On A Sole Source Basis Under The Statutory Authority Of Title 10, U.s.c. Section 2304(c) (1), As Implemented By Federal Acquisition Regulation (far) 6.302-1, "only One Responsible Source And No Other Supplies Or Services Will Satisfy Agency Requirements." A Determination By The Government Not To Compete This Effort Is Solely Within The Discretion Of The Government. The Government Will Not Pay For Any Information Received. this Announcement Constitutes The Only Solicitation, And A Written Solicitation Will Not Be Issued. The Government Will Consider Other Bids. This Requirement Is Being Synopsized As A Small Business Set Aside Under The North American Industry Classification System (naics) Code 518210, And Psc Code T007. ****note: The Required Fill-in Provisions 52.204-24 And 52.204-26 Attached To This Post Must Be Filled In And Returned With Your Quote To Be Considered For Award. **** the Naval Air Warfare Center- Aircraft Division (nawcad) At Patuxent River, Md Announces Its Intention To Procure, On A Sole Source (ss) Basis To Avionics Interface Technologies, 14769 California Street, Suite 2, Omaha, Ne 68154. the Contractor Shall Provide: 1 Fciu – Repair (repair Of An Rma Board – Replacement Of The Main Flex Board On The Fciu) please See Attached Statement Of Work And Specifications File. the Anticipated Delivery Date Is 01 April 2025. this Is A Firm-fixed Price Procurement; Therefore, The Offeror's Initial Offer Should Represent The Vendor's Best Quote In Terms Of Price And Acceptability. shipping Charges: shipping Does Not Apply To This Requirement. contracting Office Address: 21983 Bundy Road, Building 441 Patuxent River, Md 20670 technical Acceptability Will Be Determined Solely On The Content And Merit Of The Information Submitted In Response To This Synopsis/solicitation. Therefore, It Is Incumbent On The Offeror To Provide Sufficient Technical Literature, Documentation, Etc. For The Government To Make An Adequate Technical Assessment Of The Proposal. A Firm Fixed Price Contract Is Anticipated. The Provision At 52.212-1, Instructions To Offerors-commercial Items, (deviation 2018-o0018) Is Incorporated By Reference And Applies To This Acquisition. The Provision At 52.212-2 Evaluation – Commercial Items (oct 2014) Applies To This Acquisition. The Government Will Award In Accordance With Far Part 12 On A Lowest Priced, Technically Acceptable Basis. The Offeror Shall Provide Backup Information Verifying The Price Offered, E.g., A Copy Of Current Catalog, Invoices For The Same Equipment, Etc. Each Offeror Shall Include A Completed Copy Of The Provision At Far 52.212-3 Offeror Representations And Certifications – Commercial Items (mar 2020) With Its Quote. Far 52.247-34 F.o.b. Destination (nov 1991) Is Incorporated By Reference And Applies To This Acquisition. Far 52.212-4 Contract Terms And Conditions – Commercial Items (oct 2018) Is Incorporated By Reference And Applies To This Acquisition. The Clause At 52.212-5 Contract Terms And Conditions Required To Implement Statutes Or Executive Orders – Commercial Items (deviation 2018-o0021) Is Incorporated By Reference. 52.204-27 Prohibition On A Bytedance Covered Application (jun 2023) (a) Definitions. As Used In This Clause-- covered Application Means The Social Networking Service Tiktok Or Any Successor Application Or Service Developed Or Provided By Bytedance Limited Or An Entity Owned By Bytedance Limited. information Technology, As Defined In 40 U.s.c. 11101(6)-- (1) Means Any Equipment Or Interconnected System Or Subsystem Of Equipment, Used In The Automatic Acquisition, Storage, Analysis, Evaluation, Manipulation, Management, Movement, Control, Display, Switching, Interchange, Transmission, Or Reception Of Data Or Information By The Executive Agency, If The Equipment Is Used By The Executive Agency Directly Or Is Used By A Contractor Under A Contract With The Executive Agency That Requires The Use- (i) Of That Equipment; Or (ii) Of That Equipment To A Significant Extent In The Performance Of A Service Or The Furnishing Of A Product; (2) Includes Computers, Ancillary Equipment (including Imaging Peripherals, Input, Output, And Storage Devices Necessary For Security And Surveillance), Peripheral Equipment Designed To Be Controlled By The Central Processing Unit Of A Computer, Software, Firmware And Similar Procedures, Services (including Support Services), And Related Resources; But (3) Does Not Include Any Equipment Acquired By A Federal Contractor Incidental To A Federal Contract. (b) Prohibition. Section 102 Of Division R Of The Consolidated Appropriations Act, 2023 (pub. L. 117-328), The No Tiktok On Government Devices Act, And Its Implementing Guidance Under Office Of Management And Budget (omb) Memorandum M-23-13, Dated February 27, 2023, "no Tiktok On Government Devices" Implementation Guidance, Collectively Prohibit The Presence Or Use Of A Covered Application On Executive Agency Information Technology, Including Certain Equipment Used By Federal Contractors. The Contractor Is Prohibited From Having Or Using A Covered Application On Any Information Technology Owned Or Managed By The Government, Or On Any Information Technology Used Or Provided By The Contractor Under This Contract, Including Equipment Provided By The Contractor's Employees; However, This Prohibition Does Not Apply If The Contracting Officer Provides Written Notification To The Contractor That An Exception Has Been Granted In Accordance With Omb Memorandum M-23-13. (c) Subcontracts. The Contractor Shall Insert The Substance Of This Clause, Including This Paragraph (c), In All Subcontracts, Including Subcontracts For The Acquisition Of Commercial Products Or Commercial Services. (end Of Clause). quotes Are Due To Karly Kosa, Contract Specialist, At Karly.n.kosa.civ@us.navy.milby 2:00 Pm Eastern Local Time, Monday March 3rd 2025. please Provide The Following Information With Your Quote: cage Code: uei #: payment Terms Of Net 30. pricing - Are These Items On A Commercial Published, On-line, Or Internal Price List. if Available On A Price List Provide A Copy. All Price Listings Will Be Kept Confidential. if Not Available On A Price List Please Provide Information On How Pricing Is Determined (example: Item Cost+ %, Labor Rate And Materials, Etc.) estimated Delivery Date Or Period Of Performance: invoicing And Payment Will Be Made Thru Wide Area Workflow (wawf), Terms: Net 30. As Of October 1, 2007, It Became Mandatory To Be Registered In Order To Process Any Government Procurement. If You Are Not Registered, Please Take A Moment To Do So At Https://wawf.eb.mil/.

Details: Rfq Type Goods Goods Fleet Light And Medium Vehicle Spares ( Reference Number Wf12500073 Title Supply Parts Description 1 Each X Cct34764 26" Wiper Blade 2 Each X Cct34764 H7 12v Bulbs 2 Each X Cct34764 501 12v Bulbs 2 Each X Cct34764 12v Double Contact Bulbs 2 Each X Cct34764 12v Amber Light Bulb 2 Each X Cct34764 Cr2032 Remote Batteries 2 Each X Cct34764 Front Brake Discs 1 Each X Cct34764 Front Brake Pads Set 4 Each X Cct34764 Wheel Stud 4 Each X Cct34764 Wheel Nut Specification* Reg/type/make/model Cct34764 Toyota Etios 1.5 Al 2020 Vin Mbjb29bt600127391 Quotation N/a Mileage 216608 Km Notification 902177804 Contact Person Nathan Arendse 082 077 0530 Please Deliver Parts To Bea Griffiths 083 654 6452 At Khayelitsha Workshop - Cnr Makhebeni & Zakhele Rd ? Can You Dilver Parts In Khayelitsha? * Reg/type/make/model Cct34764 Toyota Etios 1.5 Al 2020 Vin Mbjb29bt600127391 Quotation N/a Mileage 216608 Km Notification 902177804 Contact Person Nathan Arendse 082 077 0530 Please Deliver Parts To Bea Griffiths 083 654 6452 At Khayelitsha Workshop - Cnr Makhebeni & Zakhele Rd ? Can You Dilver Parts In Khayelitsha? * Reg/type/make/model Cct34764 Toyota Etios 1.5 Al 2020 Vin Mbjb29bt600127391 Quotation N/a Mileage 216608 Km Notification 902177804 Contact Person Nathan Arendse 082 077 0530 Please Deliver Parts To Bea Griffiths 083 654 6452 At Khayelitsha Workshop - Cnr Makhebeni & Zakhele Rd ? Can You Dilver Parts In Khayelitsha? * Reg/type/make/model Cct34764 Toyota Etios 1.5 Al 2020 Vin Mbjb29bt600127391 Quotation N/a Mileage 216608 Km Notification 902177804 Contact Person Nathan Arendse 082 077 0530 Please Deliver Parts To Bea Griffiths 083 654 6452 At Khayelitsha Workshop - Cnr Makhebeni & Zakhele Rd ? Can You Dilver Parts In Khayelitsha? * Reg/type/make/model Cct34764 Toyota Etios 1.5 Al 2020 Vin Mbjb29bt600127391 Quotation N/a Mileage 216608 Km Notification 902177804 Contact Person Nathan Arendse 082 077 0530 Please Deliver Parts To Bea Griffiths 083 654 6452 At Khayelitsha Workshop - Cnr Makhebeni & Zakhele Rd ? Can You Dilver Parts In Khayelitsha? * Reg/type/make/model Cct34764 Toyota Etios 1.5 Al 2020 Vin Mbjb29bt600127391 Quotation N/a Mileage 216608 Km Notification 902177804 Contact Person Nathan Arendse 082 077 0530 Please Deliver Parts To Bea Griffiths 083 654 6452 At Khayelitsha Workshop - Cnr Makhebeni & Zakhele Rd ? Can You Dilver Parts In Khayelitsha? * Reg/type/make/model Cct34764 Toyota Etios 1.5 Al 2020 Vin Mbjb29bt600127391 Quotation N/a Mileage 216608 Km Notification 902177804 Contact Person Nathan Arendse 082 077 0530 Please Deliver Parts To Bea Griffiths 083 654 6452 At Khayelitsha Workshop - Cnr Makhebeni & Zakhele Rd ? Can You Dilver Parts In Khayelitsha? * Reg/type/make/model Cct34764 Toyota Etios 1.5 Al 2020 Vin Mbjb29bt600127391 Quotation N/a Mileage 216608 Km Notification 902177804 Contact Person Nathan Arendse 082 077 0530 Please Deliver Parts To Bea Griffiths 083 654 6452 At Khayelitsha Workshop - Cnr Makhebeni & Zakhele Rd ? Can You Dilver Parts In Khayelitsha? * Reg/type/make/model Cct34764 Toyota Etios 1.5 Al 2020 Vin Mbjb29bt600127391 Quotation N/a Mileage 216608 Km Notification 902177804 Contact Person Nathan Arendse 082 077 0530 Please Deliver Parts To Bea Griffiths 083 654 6452 At Khayelitsha Workshop - Cnr Makhebeni & Zakhele Rd ? Can You Dilver Parts In Khayelitsha? * Reg/type/make/model Cct34764 Toyota Etios 1.5 Al 2020 Vin Mbjb29bt600127391 Quotation N/a Mileage 216608 Km Notification 902177804 Contact Person Nathan Arendse 082 077 0530 Please Deliver Parts To Bea Griffiths 083 654 6452 At Khayelitsha Workshop - Cnr Makhebeni & Zakhele Rd ? Can You Dilver Parts In Khayelitsha? Delivery Date2025/02/28 Delivery Tonathan Arendse Khayelitsha Workshop Delivery Address1 Khayelitsha Workshop, Cnr Makhebeni & Zakhele Rd Contact Personnathan Arendse Telephone Number0000000000 Cell Number0820770530 Closing Date2025/02/11 Closing Time02 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 20000000000 Buyer Email Addresswf1@capetown.gov.za Buyer Detailsr. Davids Buyer Phone0214444397 Attachments No Attachments Note This Commodity Is Only Available For Online Quoting. No Manual Submissions Will Be Accepted For This Commodity. Suppliers Will Need Must Log In To E-services Portal To Access Rfq Information And To Submit Quotations. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Clothing, Ppe & Accessories Reference Number Ga12500363 Title Clothing Items : Overall Jackets Description 300 Each X Overall Jacket;cot;org;34/87cm;cct 300 Each X Overall Jacket;cot;org;38/97cm;cct 300 Each X Overall Jacket;cot;org;40/102cm;cct Specification* Refer To: Ga12500363 Overall Jacket - Material: 100%cotton J54 Fabric; Colour: Orange Cks 129 21 C; Size: 34/87cm; Branding: Cct To Be Embroidered On Back In Black Text With 40mm High Century Gothic Font; Specifications: With Collar And Lapels, Breast Pocket With Flap, Two Side Pockets. Zip Up Front, One Piece Back, One Piece Sleeves Set In With Plain Hemmed Cuffs, Full Length Style Jacket Without Waistband With Side Slits, Reflective Band 54 Mm Width Polyester Petersham Tape In Neon Yellow Colour, 25mm Width Silver Reflective Tape With Minimum Brightness Of 475-500 Candela (complying With Sans 50471 Standard) Stitched Around Chest And Sleeves; Unit Packaging: Garment To Be Individually Wrapped In A Clear Plastic Bag, Indicating The Size Of The Garment; Packaging: Garment To Be Wrapped In Bundles Of 10 Items Per Same Size, Supplied In Cardboard Boxes. Boxes Are To Be Identified/marked With Content Description, Size Of Garments, Quantity Of Items In The Box, Cct Material Code And The Cct Purchase Order Number; Fabric Standards: Manufactured To Sans 1387 Parts 1 And 2, Cotton Work Wear Fabric; Manufacturing Standards: Manufactured In Accordance With Sans 434 And Bearing The Mark; Origin: Made In South Africa; Guideline: Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By. 1. Nb: The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. * Refer To: Ga12500363 Overall Jacket - Material: 100%cotton J54 Fabric; Colour: Orange Cks 129 21 C; Size: 38/97cm; Branding: Cct To Be Embroidered On Back In Black Text With 40mm High Century Gothic Font; Specifications: With Collar And Lapels, Breast Pocket With Flap, Two Side Pockets. Zip Up Front, One Piece Back, One Piece Sleeves Set In With Plain Hemmed Cuffs, Full Length Style Jacket Without Waistband With Side Slits, Reflective Band 54 Mm Width Polyester Petersham Tape In Neon Yellow Colour, 25mm Width Silver Reflective Tape With Minimum Brightness Of 475-500 Candela (complying With Sans 50471 Standard) Stitched Around Chest And Sleeves; Unit Packaging: Garment To Be Individually Wrapped In A Clear Plastic Bag, Indicating The Size Of The Garment; Packaging: Garment To Be Wrapped In Bundles Of 10 Items Per Same Size, Supplied In Cardboard Boxes. Boxes Are To Be Identified/marked With Content Description, Size Of Garments, Quantity Of Items In The Box, Cct Material Code And The Cct Purchase Order Number; Fabric Standards: Manufactured To Sans 1387 Parts 1 And 2, Cotton Work Wear Fabric; Manufacturing Standards: Manufactured In Accordance With Sans 434 And Bearing The Mark; Origin: Made In South Africa; Guideline: Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By. * Refer To: Ga12500363 Overall Jacket - Material: 100%cotton J54 Fabric; Colour: Orange Cks 129 21 C; Size: 40/102cm; Branding: Cct To Be Embroidered On Back In Black Text With 40mm High Century Gothic Font; Specifications: With Collar And Lapels, Breast Pocket With Flap, Two Side Pockets. Zip Up Front, One Piece Back, One Piece Sleeves Set In With Plain Hemmed Cuffs, Full Length Style Jacket Without Waistband With Side Slits, Reflective Band 54 Mm Width Polyester Petersham Tape In Neon Yellow Colour, 25mm Width Silver Reflective Tape With Minimum Brightness Of 475-500 Candela (complying With Sans 50471 Standard) Stitched Around Chest And Sleeves; Unit Packaging: Garment To Be Individually Wrapped In A Clear Plastic Bag, Indicating The Size Of The Garment; Packaging: Garment To Be Wrapped In Bundles Of 10 Items Per Same Size, Supplied In Cardboard Boxes. Boxes Are To Be Identified/marked With Content Description, Size Of Garments, Quantity Of Items In The Box, Cct Material Code And The Cct Purchase Order Number; Fabric Standards: Manufactured To Sans 1387 Parts 1 And 2, Cotton Work Wear Fabric; Manufacturing Standards: Manufactured In Accordance With Sans 434 And Bearing The Mark; Origin: Made In South Africa; Guideline: Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By. Delivery Date2025/04/11 Delivery Tologistics - Ndabeni Store Materials Store / Ph: 444 5456 Delivery Address25 Oude Molen Road, Ndabeni Contact Personrasheed Erasmus Telephone Number0214004808 Cell Number Closing Date2025/01/28 Closing Time03:00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressga1.quotations@capetown.gov.za Buyer Detailsr.ross Buyer Phone0214009530 Attachments No Attachments Note On 1 November 2017 The City Of Cape Town Went Live With E-procurement Which Was Piloted With 3 Commodities: Clothing, Building Hardware And Is&t. No Manual Submissions Will Be Accepted For These Commodities And Suppliers Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Tools & Machinery Reference Number Gd12500585 Title Fluke 376 Fc - New Description 3 Each X Fluke 376 Fc - New 1 Each X Fluke 376 Fc - Replacement Specification* Quotation Conditions Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Fluke 376 Fc 1000am Trms Clamp + 1 Flex 18" Or Equivalent Maximum Voltage Between Any Terminal And Earth Ground 1000 V Battery Type 2 Aa Alkaline Batteries, Neda 15a, Iec Lr6 Temperature Operating -10 °c To +50 °c (14 °f To + 122 °f) Storage -40 °c To +60 °c (-40 °f To + 140 °f) Operating Humidity Non Condensing (<(><<)> 10 °c (50 °f)), =90 % Rh (at 10 °c To 30 °c (50 °f To 86 °f)), =75 % Rh (at 30 °c To 40 °c (86 °f To 104 °f)), =45 % Rh (at 40 °c To 50 °c (104 °f To 122 °f)) Altitude Operating 3,000 M (9,842 Ft) Storage 12,000 M (39,370 Ft) Dimensions 24.9 Cm (9.8 In) X 8.5 Cm (3.3 In) X 4.5 Cm (1.7 In) Weight 395 G (13.9 Oz) Jaw Opening 34 Mm (1.3 In) Flexible Current Probe Diameter 7.5 Mm (.29 In) Flexible Current Probe Cable Length (head To Electronics Connector) 1.8 M (70.8 In) Safety Iec 61010-1, Pollution Degree 2 Iec 61010-2-032 Cat Iii 1000 V / Cat Iv 600 V Iec 61010-2-033 Cat Iii 1000 V / Cat Iv 600 V Ip Rating Iec 60529 Ip30, Non-operating Radio Frequency Certification Fcc Id T68-fble Ic 6627a-fbl Contact Person Algernon Clayton 021 444 1885 / Algernon.clayton@capetown.gov.za * Fluke 376 Fc 1000am Trms Clamp + 1 Flex 18" Or Equivalent Maximum Voltage Between Any Terminal And Earth Ground 1000 V Battery Type 2 Aa Alkaline Batteries, Neda 15a, Iec Lr6 Temperature Operating -10 °c To +50 °c (14 °f To + 122 °f) Storage -40 °c To +60 °c (-40 °f To + 140 °f) Operating Humidity Non Condensing (<(><<)> 10 °c (50 °f)), =90 % Rh (at 10 °c To 30 °c (50 °f To 86 °f)), =75 % Rh (at 30 °c To 40 °c (86 °f To 104 °f)), =45 % Rh (at 40 °c To 50 °c (104 °f To 122 °f)) Altitude Operating 3,000 M (9,842 Ft) Storage 12,000 M (39,370 Ft) Dimensions 24.9 Cm (9.8 In) X 8.5 Cm (3.3 In) X 4.5 Cm (1.7 In) Weight 395 G (13.9 Oz) Jaw Opening 34 Mm (1.3 In) Flexible Current Probe Diameter 7.5 Mm (.29 In) Flexible Current Probe Cable Length (head To Electronics Connector) 1.8 M (70.8 In) Safety Iec 61010-1, Pollution Degree 2 Iec 61010-2-032 Cat Iii 1000 V / Cat Iv 600 V Iec 61010-2-033 Cat Iii 1000 V / Cat Iv 600 V Ip Rating Iec 60529 Ip30, Non-operating Radio Frequency Certification Fcc Id T68-fble Ic 6627a-fbl Contact Person Algernon Clayton 021 444 1885 / Algernon.clayton@capetown.gov.za Delivery Date2025/02/28 Delivery Toelectricity - Ndabeni Red1 Plant / Ph 511 0410 Delivery Address0000 Generic Plant, Cape Town Contact Personalgernon Clayton Telephone Number0214441885 Cell Number Closing Date2025/02/14 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgd1.quotations@capetown.gov.za Buyer Detailsa.filby Buyer Phone0214009269 Attachments No Attachments Note This Commodity Has Gone Live For Only Quoting On The E-procurement Portal. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Synopsis: introduction: in Accordance With Federal Acquisition Regulation (far) 10.002(b)(2), This Sources Sought Notice Is For Market Research And Information Purposes Only At This Time And Shall Not Be Construed As A Solicitation Or As An Obligation On The Part Of The Department Of Veterans Affairs (va). the Department Of Veterans Affairs, Veterans Health Administration (vha), Program Contracting Activity Central (pcac) Is Conducting A Market Survey And Is Seeking Potential Sources For The Ehrm Infrastructure Upgrades Data Center Construction Project At The St. Louis Va Medical Center (vamc) Located At 1 Jefferson Barracks Dr., St. Louis, Mo 63125. project Description: the St. Louis (jefferson Barracks) Vamc Is Seeking A General Contractor To Furnish All Labor, Tools, Materials, Equipment, And Supervision To Construct A New Ehrm Data Center In The Basement Of Bldg. 56. The Current Data Center In Bldg. 1 Will Be Relocated To Bldg. 56. The Scope Of This Project Includes But Not Limited To The Following Infrastructure Improvements: Electrical (power (normal, Emergency), Lighting), Bonding, Ups, Building Management System Interfaces, Assess For New Hvac, New Space Construction (walls, Doors, Finishes), Fire Suppression System, Communication Infrastructure (new Data Outlets, Patch Panels, Cat 6a Cable), Physical Security, Fiber Infrastructure Backbone Connectivity To Mda. procurement Information: the Proposed Project Will Be A Competitive Firm-fixed-price Contract Utilizing The Design-bid-build Approach (final Specifications And Drawings Will Be Provided). The Anticipated Solicitation Will Be Issued As Either A Request For Proposal (rfp) In Accordance With Far Part 15, Considering Technical And Price Factors Or As An Invitation For Bid (ifb) In Accordance With Far Part 14. The Results And Analysis Of The Market Research Will Finalize The Determination Of The Procurement Method. The Type Of Socio-economic Set-aside, If Any, Will Depend Upon The Responses To This Notice And Any Other Information Gathered During The Market Research Process. this Project Is Planned For Advertising In March 2025. In Accordance With Vaar 836.204, The Magnitude Of Construction Is Between $5,000,000.00 And $10,000,000.00. The Applicable North American Industry Classification System (naics) Code Is 236220 With A Size Standard Of $45 Million. The Duration Of The Project Is Currently Estimated At 240 Calendar Days From The Issuance Of A Notice To Proceed. The Services For This Project Will Include Providing All Construction Related Services Such As: Providing Labor, Materials And Equipment Required To Complete The Project As Per Contract Documents Prepared By An Independent Architect-engineer Firm. the Results And Analysis Of The Market Research Will Determine Whether To Limit Competition Among The Small Business Categories, Proceed With Full And Open Competition As Other Than Small Business, Or Use A Tiered Set-aside Evaluation. The Type Of Socioeconomic Set-aside, If Any, Will Depend Upon The Responses To This Notice And Any Other Information Gathered During The Market Research Process. All Socioeconomic Categories Are Encouraged To Respond To This Announcement. capability Statement: respondents Shall Provide A General Capabilities Statement To Include The Following Information: section 1: Provide Company Name, Unique Entity Identifier Number Associate With Sam.gov, Company Address, Point-of-contact Name, Phone Number And Email. section 2: Provide Company Business Size Based On Naics Code 236220. Also, Provide Business Type (i.e., Large Business, Small Business, Service-disabled Veteran Owned Small Business, Small Disadvantaged Business, Women-owned Small Business, Hub Zone Small Business, Etc.). section 3: Provide A Statement Of Interest In The Project. section 4: Provide The Prime Contractor S Available Bonding Capacity In The Form Of A Letter Of Intent From Your Bonding Company With This Submission. section 5: Provide The Type Of Work Your Company Has Performed In The Past In Support Of The Same Or Similar Requirement. This Section Is Important As It Will Help To Determine The Type Of Socio-economic Set-aside, If Any. Please Provide The Following In Your Response: no More Than Three (3) Contracts That Your Company Has Performed Within The Last Seven (7) Years That Are Of Comparable Size, Complexity, And Scope To This Requirement. Include The Project Name, Project Owner And Contact Information As This Person May Be Contacted For Further Information, Project Scope, Project Size (example: Square Footage), Building Use (example: Medical Facility, Office Building, Etc.), Project Dollar Value, Start And Completion Dates. describe Specific Technical Skills And Key Personnel Your Company Possess To Perform The Requirements Described Under Description Of Work. describe Your Self-performed** Effort (as Either A Prime Or Subcontractor). Describe Self-performed Work In Terms Of Dollar Value And Description. **self-performed Means Work Performed By The Offeror Themselves, Not Work Performed By Another Company For Them For Any Of The Project Examples Provided. it Is Requested That Interested Contractors Submit A Response (electronic Submission) Of No More Than Eight (8) Single Sided Pages, Single-spaced, 12-point Font Minimum That Addresses The Above Information. This Response Must Be Submitted As A Single Application-generated (not Scanned) Pdf Document That Is Less Than Or Equal To 4mb In Size. Please Note That Hard Copies Will Not Be Accepted. Please Also Include A Cover Page, Which Includes, At A Minimum: The Company S Name, Address, Dun & Bradstreet Number, Socio-economic Status, Point-of-contact Name, Phone Number, And E-mail Address. Responses Must Include The Sources Sought Number And Project Title In The Subject Line Of Their E-mail Response. Submissions (responses) Shall Be Submitted Via Email To The Primary Point Of Contact Listed Below By February 13, 2025 At 1:00 Pm Et. No Phone Calls Will Be Accepted. the Capabilities Statement Submitted In Response To This Sources Sought Shall Not Be Considered To Be A Bid Or Proposal. This Notice Is For Information And Planning Purposes Only And Is Neither To Be Construed As A Commitment By The Government Nor Will The Government Pay For Information Solicited. No Evaluation Letters And/or Results Will Be Issued To The Respondents. After Completing Its Analyses, The Government Will Determine Whether To Limit Competition Among The Small Business Categories Listed Above Or Proceed With Full And Open Competition As Other Than Small Business. at This Time No Solicitation Exists; Therefore, Please Do Not Request A Copy Of The Solicitation. If A Solicitation Is Released It Will Be Synopsized In Contract Opportunities At Https://sam.gov. It Is The Potential Offeror's Responsibility To Monitor This Site For The Release Of Any Solicitation Or Synopsis. contracting Office Address: vha Program Contracting Activity Central (vha-pcac) 6100 Oak Tree Blvd., Suite 490 independence, Oh 44131 primary Point Of Contact: thomas Council contract Specialist thomas.council@va.gov