Advertisement Tenders

Details: Description [svp-01-2025] Request To Submit Proposal For The Lot 1- Food And Accommodation, Lot 2- Van Rental, Lot 3- Supplies For The Conduct Of National Livestock Program Planning And Budget Workshop For Fy 2026 Under Livestock Program At Approved Budget For The Contract Amounting To Nine Hundred Sixty Thousand Five Hundred Pesos (php960,500.00) Pursuant To Alternative Method Of Procurement Specifically Negotiated Procurement - Small Value Procurement Under Section 53.9 Under Ra 9184 And Its Revised Irr. The Department Of Agriculture Regional Field Office No. 5 (da Rfo 5), San Agustin, Pili, Camarines Sur Is Inviting Interested Supplier To Submit Complete Bid Proposal For Lot 1- Food And Accommodation, Lot 2- Van Rental, Lot 3- Supplies For The Conduct Of National Livestock Program Planning And Budget Workshop For Fy 2026 Under Livestock Program The Agency Intends To Apply The Amount Nine Hundred Sixty Thousand Five Hundred Pesos (php960,500.00) As The Approved Budget For The Contract. Partial Bid Is Allowed. As Per Approved Purchase Request And Considering The Nature Of Requisition Being Not More Than One Million Pesos (php1,000,000.00) And In Order To Fast-track The Implementation Of The Program, This Procurement Is Facilitated Thru Negotiated Procurement-small Value Procurement Under Section 53.9 Of Ra 9184 And Its Revised Irr. As Such Lot 1- Robiedo Inc, Naga City; Golden 7 Holdings Corp., Naga City; Royale Emelina, Naga City; Lot 2- Lot 2 - Tj Van Rentals, Legazpi City; Bicol Van Rental Travel And Tours, Daraga, Albay, Aol Travel & Tours, Legazpi City Lot 3- Allan-justine General Merchandise, Naga City, Pixelgems Graphix Advertising, Pili Cam. Sur And Rfk Gen, Mdse, Pili Camarines Sur And Any Other Interested Bidders Are Hereby Requested To Submit The Following Documents: 1. Mayor’s/business Permit 2. Philgeps Registration 3. Bir Registration 4. Omnibus Sworn Statement 5. Business Income Tax Return 6. Menu (lot 1) The Bidders Are Required To Pay The Non-refundable Five Hundred Pesos (php500.00) For Bid Documents To The Cashier’s Office, Da Rfo-5, Pili, Camarines Sur. All Submitted Documents Must Be In Duplicate (original And Copy 1), All Copies Must Be Marked With Ear Tabs Or Side-end To Identify The Page Components And Shall Be Properly Addressed To The Bac Chairperson, Otherwise, Bids Will Be Automatically Rejected On The Ground Of Non-compliance With The Prescribed Bid Requirements. Sealed Bid Must Be Duly Received By Bac Secretariat Through Manual Submission Not Later Than 9:00 In The Morning Of 31 January 2025 At The Bac Office, Da Rfo 5, San Agustin, Pili Camarines Sur. Late Bids Shall Not Be Accepted. The Opening Of Proposal Shall Be At 10:00am Onwards At 3rd Floor Operation Building, Da Rfo-5, San Agustin, Pili, Camarines Sur. Let This Invitation Be Posted Pursuant To Ra 9184 And Its Irr. For Further Information, Please Refer To Bac Secretariat Office, Da Rfo 5, San Agustin, Pili Camarines Sur Or Via Email Bacrfo5@gmail.com January 27, 2025 San Agustin, Pili, Camarines Sur. (signed) Lorenzo L. Alvina Oic, Rtd For Research And Regulations Bac Chairperson

Details: Rfq Type Goods Goods Tools & Machinery Reference Number Gd12500558 Title Hydrant Standpipe & Key Description 1 Each X Hydrant Standpipe & Key Specification* Quotation Conditions Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. A Standpipe Is A Type Of Rigid Water Piping Which Is Built Into Multi-story Buildings In A Vertical Position To Which Fire Hoses Can Be Connected, Allowing Manual Application Of Water To The Fire. Within The Context Of A Building Or Bridge, A Standpipe Serves The Same Purpose As A Fire Hydrant. Advantages Laying A Firehose Up A Stairwell Takes Time, And This Time Is Saved By Having Fixed Hose Outlets Already In Place. There Is Also A Tendency For Heavy Wet Hoses To Slide Downward When Placed On An Incline (such As The Incline Seen In A Stairwell), Whereas Standpipes Do Not Move. The Use Of Standpipes Keeps Stairwells Clear And Is Safer For Exiting Occupants. Standpipes Go In A Direct Up And Down Direction Rather Than Looping Around The Stairwell, Greatly Reducing The Length And Thus The Loss Of Water Pressure Due To Friction Loss. Additionally, Standpipes Are Rigid And Do Not Kink, Which Can Occur When A Firehose Is Improperly Laid On A Stairwell. Standpipe Systems Also Provide A Level Of Redundancy, Should The Main Water Distribution System Within A Building Fail Or Be Otherwise Be Compromised By A Fire Or Explosion. Delivery Date2025/02/24 Delivery Tocs - Open Space & Nature Conservation Cson Delivery Address0000 Cs - Open Space & Nature Conserv, Cape Town Contact Personcherilee Heuvel Telephone Number0214441021 Cell Number Closing Date2025/02/07 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgd1.quotations@capetown.gov.za Buyer Detailsa.filby Buyer Phone0214009269 Attachments No Attachments Note This Commodity Has Gone Live For Only Quoting On The E-procurement Portal. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Electrical Equipment & Components Reference Number Gh12500505 Title Bus Differential And Breaker Fail Relay Description 1 Each X Bus Differential And Breaker Fail Relay Specification* Bus Differential And Breaker Fail Relay Sel 487b With Conventional Secondary Outputs, Partno. 0487b1x6x12xc2xeh7eexxx Or Equivalent Specification Sel 487b (487b#tb5v), Partno. 0487b1x6x12xc2xeh7eexxx Or Equivalent Device With Similar Specification. Power Supply 125-250 Vdc Or 110-240 Vac Secondary Inputs 1a Phase Ac Input Channels 3 Ac Voltage, 21 Ac Current Ethernet Communication Protocols Ftp, Telnet, Dnp3 Lan/wan, And Iec 61850 Ethernet Connection Options Ethernet Card With Two 100base-fx Connectors Mainboard Input Voltage 125 Vdc I/o Control Input Voltage 125 Vdc Or Vac I/o Contact Outputs Specs 32 Common Inputs, 12 Independent Inputs, 12 High-speed High-current Interrupting Form Outputs, 4 Standard Form Outputs. *****quotation Conditions***** Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. *****wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent"***** -----nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation.----- Delivery Date2025/03/04 Delivery Toelectricity - Bloemhof Materials Store / Ph 444 1859 Delivery Address56 Bloemhof Road, Bellville Contact Persondanelle Wagner Telephone Number0815773706 Cell Number Closing Date2025/02/05 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressmonja.davids@capetown.gov.za Buyer Detailsm.davids Buyer Phone0214006752 Attachments No Attachments Note On 3 April 2018 The City Of Cape Town Went Live With E-procurement Which Was Piloted With 3 Commodities Civil, Hardware, Electrical. No Manual Submissions Will Be Accepted For These Commodities And Suppliers Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Corporate Merchandise Reference Number Gl12500502 Title Gazebo W/branding 3w X 3w X 2.05 H Description 2 Each X Gazebo W/branding 3w X 3w X 2.05 H Specification* Gazebo W/branding 3,0 M Wide X 3,0 M Wide X 2,05 M High Please Find Attached 2x Artwork With Example Sizing Pdf. Nb 2x Branding Artworks Have Been Attached, 1 For Each Gazebo. Specs System Weight 21 Kg Structure 38 Mm X 38 Mm X 1,8 Mm - Anodised Aluminium Cross Bars 13 X 24 X 1,3 Mm - Double Reinforced Extrusion Connectors Glass-filled Nylon, Stainless Steel Bolts And Buttons Feet Steel Poles Hexagonal Substrate Canopy <(>&<)> Side Walls Canvas Polyester - 240 Gsm Or Oxford Fabric - 240 Gsm. Must Be Water Resistant. Print Full Colour With Uv-resistant, Anti-fade Ink. Typeface Only Avenir Next Family May Be Used. Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Delivery Date2025/02/28 Delivery Tocs - Social & Development Cssd Delivery Address12 Oude Molen Road, Ndabeni Contact Personmatthew Granger Telephone Number0214006048 Cell Number Closing Date2025/02/06 Closing Time04 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgl1.quotations@capetown.gov.za Buyer Detailsc.williams Buyer Phone0214001789 Attachments No Attachments Note On 1 August 2018 The City Of Cape Town Went Live With E-procurement Which Was Piloted With 3 Commodities Clothing, Building Hardware And Is&t. No Manual Submissions Will Be Accepted For These Commodities And Suppliers Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Kitchen Appliances & Accessories Reference Number Gl12500488 Title Kitchen Appliances & Accessories Description 250 Each X Bag Transparent 500x700x75micron 750 Each X Bag Transparent 500x700x75micron 600 Each X Bag Ziplock 250x360x50micron 1 Each X Bag Ziplock 215x315x50micron 1 Each X Bag Ziplock 150x250x50micron Specification* Clear Transparent Bags 500x750x75micron Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. # Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" # Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. * Clear Transparent Bags 500x750x75micron "wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent". *** Please Note Samples / Pictures / Technical Data Sheets Will Be Requested When Needed *** * Bag Ziplock Transparent 250x360x50micron * Bag Ziplock Transparent 215x315x50micron * Bag Ziplock Transparent 150x250x50micron Delivery Date2025/02/28 Delivery Tozeekoeivlei - Water Treatment Plant / Ph 444 9605 Delivery Address0 Off Strandfontein Road, Zeekoevlei Contact Personlionel Rossouw Telephone Number0214449609 Cell Number Closing Date2025/02/06 Closing Time04 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressgl1.quotations@capetown.gov.za Buyer Detailsc.williams Buyer Phone0214001789 Attachments No Attachments Note This Commodity Has Gone On E-procurement On 1 August 2018. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Electrical Equipment & Components Reference Number Gh12500543 Title Pole Mounting Box Lv Uv Stable Pp Description 100 Each X Pole Mounting Box Lv Uv Stable Pp Specification* Pole Mounting Box - Voltage Low Voltage Material Uv Stable Polypropylene Size Oval Design Minimum Bottom Opening Dimensions 1 45mm Long Curve, 100mm Short Curve, 210mm Inside Height Specification Must Be Able To Accept Upto Three Single Pole Mcb's With Maximum Dimentions 26 X 110 X 75mm (depth), Or 1 X 3-pole Mcb Under 100a, 78 X 110 X 75mm (depth), Three External Operating Slides For Each Of The Single Pole Mcb's, Re-configrable To 1 Or 2 Depending On The Mcb Configuration, Operating Slides To Be Operated From Ground Level By Means Of A Hooked Linkstick, Cord Securing The Lid To The Base When Lid Is Removed For Maintenance / Installation, Base To To Include Din Rail Mounting For The Mcb's Mounting Mounting Bracket To Allow For Horizontal Or Vertical Mounting, Manufactured From Non-ferous Metal, With 2 X Self Tapping Screws To Secure Bracket To The Box Base, Guidline Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent. ********************** Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. Please Submit Technical Data Information With Your Quote Submission. ******************** Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation Delivery Date2025/03/17 Delivery Toelectricity - Ndabeni Red1 Plant / Ph 511 0410 Delivery Address01 Melck Street, Ndabeni Contact Persongraham Southgate Telephone Number0217635700 Cell Number Closing Date2025/02/12 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressmonja.davids@capetown.gov.za Buyer Detailsm.thorpe Buyer Phone0214006752 Attachments No Attachments Note On 3 April 2018 The City Of Cape Town Went Live With E-procurement Which Was Piloted With 3 Commodities Civil, Hardware, Electrical. No Manual Submissions Will Be Accepted For These Commodities And Suppliers Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Electrical Equipment & Components Reference Number Gh12500554 Title Pole Mounting Box Lv Uv Stable Pp Description 230 Each X Pole Mounting Box Lv Uv Stable Pp Specification* Pole Mounting Box - Voltage Low Voltage Material Uv Stable Polypropylene Size Oval Design Minimum Bottom Opening Dimensions 1 45mm Long Curve, 100mm Short Curve, 210mm Inside Height Specification Must Be Able To Accept Upto Three Single Pole Mcb's With Maximum Dimentions 26 X 110 X 75mm (depth), Or 1 X 3-pole Mcb Under 100a, 78 X 110 X 75mm (depth), Three External Operating Slides For Each Of The Single Pole Mcb's, Re-configrable To 1 Or 2 Depending On The Mcb Configuration, Operating Slides To Be Operated From Ground Level By Means Of A Hooked Linkstick, Cord Securing The Lid To The Base When Lid Is Removed For Maintenance / Installation, Base To To Include Din Rail Mounting For The Mcb's Mounting Mounting Bracket To Allow For Horizontal Or Vertical Mounting, Manufactured From Non-ferous Metal, With 2 X Self Tapping Screws To Secure Bracket To The Box Base, Guidline Wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent. *********************** Clause - 2.14.1 <(>&<)> 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. Please Submit Technical Data Information With Your Quote Submission. ********************** Nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation Delivery Date2025/04/22 Delivery Toelectricity - Vanguard Red1 Plant/ Ph 637 1240 Delivery Address01 Klipfontein Road, Vanguard Contact Personsamkelo Lisa Telephone Number0214441380 Cell Number Closing Date2025/02/19 Closing Time12 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressmonja.davids@capetown.gov.za Buyer Detailsm.thorpe Buyer Phone0214006752 Attachments No Attachments Note On 3 April 2018 The City Of Cape Town Went Live With E-procurement Which Was Piloted With 3 Commodities Civil, Hardware, Electrical. No Manual Submissions Will Be Accepted For These Commodities And Suppliers Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Civil, Road, Sewer, Plumbing & Eng Suppl Reference Number Ge12500510 Title V1300 Submersible 1.3kw Single Phase Description 10 Each X V1300 Submersible 1.3kw Single Phase Specification* V1300 Submersible 1.3kw Single Phase Ht V1300 1.3kw Specifications Model No.,,,,,,v1300(df) Power Rating,,,,,,1.3kw Max Head,,,,,,12m Max Flow,,,,,,18m3/h Outlet,,,,,,,,50mm Driving Type,,,,,,motor Material,,,,,,cast Iron Application,,,,,,submersible Pump, Sewage Pump Industry,,,,,,mechanical Pump Media,,,,,,,,sewage Pumps Performance,,,,,,automatic Pump Theory,,,,,,,,centrifugal Pump Pump Body,,,,,,cast Iron/stainless Steel Voltage,,,,,,,,220-240v Impeller,,,,,,cast Iron Shaft,,,,,,,,stainless Steel/steel Isulation,,,,,,class B/f Protection,,,,,,ip44/54 Mechanical Seal,,,,sic/ceramic/graphite Contact Roberto Scott 0731874895 Region 1 South Eam Blue Waters Close, Simons Town Cell 073 187 4895 | Landline 021 814 1684 Quotation Conditions Clause - 2.14.1 & 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier's Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. "wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" "nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. Delivery Date2025/03/25 Delivery Towater Services Delivery Address12 Hertzog Boulevard, Cape Town Contact Personroberto Scott Telephone Number0731874895 Cell Number Closing Date2025/02/21 Closing Time04 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressge1.quotations@capetown.gov.za Buyer Detailsj.esterhuize3 Buyer Phone0214003413 Attachments No Attachments Note This Commodity Has Gone On E-procurement On 1 August 2018. No Manual Submissions Will Be Accepted For This Commodities. Suppliers Will Need Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Details: Rfq Type Goods Goods Clothing, Ppe & Accessories Reference Number Ga12500401 Title Czip Booties 4.3mm Wetsuit Description 98 Each X Zip Booties 98 Each X 4.3mm Wetsuit Specification* Ref Ga12500401 Please Supply And Deliver Zip Booties For The Following Sizes 16x Size 4 16x Size 5 17x Size 6 17x Size 7 16x Size 8 16x Size 9 Specifications Keep Your Feet Protected As You Dive With The Zip Booties. The 5mm Double Nylon Neoprene Construction Is Durable And Comfortable With Its Inside Leg Zipper And Strap Zip Tab. The Contoured Cut With Rubber Toe Cap, Heel, Fin Tap And Sole All Serve To Provide An Effective Grip And A Snug Fit. Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#s Commercial Position (including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials, Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned May Be Declared Non-responsive. #wherever Reference Is Made To Any Particular Trade Mark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words "or Equivalent" #nb The Municipal Bidding Document 6.1 (mbd 6.1) Is Attached, In Order To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Each And Every Rfq Submission, Failure To Submit Will Result In Zero Point Allocation. * Please Supply And Deliver Wetsuits With The Following Sizes 24x Small 25x Medium 25x Large 24x X-large Specifications The Ignition Has Superlite Neoprene In The Arms And Gusset Areas, With A 4mm Dura-mesh Chest For Extra Warmth. The Adjustable Neck Closure Insures A Good Water Tight Seal. The Ignition Has Gbs Seams, Locking Ykk Back Zip And Supra-tex Knee Pads. Or Equivalant Delivery Date2025/03/28 Delivery Tocs - Open Space & Nature Conservation Cson Delivery Addresso Steenberg Road, Westlake Conservation Centre,tokai Contact Personsimone Petersen Telephone Number0214448774 Cell Number0717127666 Closing Date2025/02/20 Closing Time03 00 Pm Rfq Submission Fax0000000000 Rfq Submission Fax 2 Buyer Email Addressga1.quotations@capetown.gov.za Buyer Detailsr.ross Buyer Phone0214009530 Attachments No Attachments Note On 1 November 2017 The City Of Cape Town Went Live With E-procurement Which Was Piloted With 3 Commodities Clothing, Building Hardware And Is&t. No Manual Submissions Will Be Accepted For These Commodities And Suppliers Must Log In To E-services Portal To Access Rfqs. Bids Must Be Compliant With The Preferential Procurement Regulations, 2017 Including But Not Limited To Local Content, Functionality, Price And Preference, Eligibility Criteria And Relevant Statutory Criteria. The Details Of This Are Contained In The Rfq Document And/or The Specification Advertised Via E-procurement. Only Locally Produced Goods Or Locally Manufactured Goods, Meeting The Stipulated Minimum Threshold For Local Production And Content, Will Be Considered, Where Applicable.

Description: Contract notice – Sector Directive, standard regulation Negotiated procedure with prior publication of a call for competition/negotiated procedure (construction work) New construction Uw Deponiestrasse Project description Substation Deponiestrasse SW Netz intends to build a new substation in the Deponiestrasse area in Wiesbaden. The property has a total size of 2,648 m2. Connection to the substation The 110 kV connection/looping of the Uw is via an overhead line approx. 300 m away. The underpass to two high-voltage systems is created on the mast, which are then relocated to the Uw. The municipal utilities are also responsible for the 20 kV connection. UW building The UW building consists of a total of five floors, each with approximately 680 m2. The Ug, Eg and 1st floor will be occupied by the electrical equipment of the substation (see list below), whereas a data center will be set up on the 2nd and 3rd floors. The 110 and 20 kV cables will be introduced into the building in the basement. The 20 kV cables will be led directly to the ground floor. This is where the 20 kV primary switchgear is located, which is dimensioned as an air-insulated double busbar system with a nominal current of 2,500 A and a short-circuit current of 25 Ka 3s. The 20 kV star-point switchgear will also be located on the ground floor. This is to be designed as an air-insulated single busbar system with a nominal current of 1,250 A and a short-circuit current of 20 Ka 1s. The 110 kV cables from the basement are led through two shafts into the 110 kV switchgear on the first floor. This is to be designed as a gas-insulated double busbar system with pure air as the insulation medium. It comprises 9 fields with the following division: transformer 1, feed-in network 1, feed-in 1, reserve field 1, cross-coupling, longitudinal separation, feed-in network 2, reserve field 2, transformer 2. The busbars and fields are to be designed for 2,500 A and a short-circuit current of 40 Ka 3s. The standardized protection and control cabinets are housed in a separate adjacent room. The list of rooms for the location of the remaining equipment can be found below. All technical components are to be designed in accordance with the current standards and regulations. The building must not exceed a maximum height of 20 m. The building's developer is Stadtwerke Wiesbaden Netz GmbH, which will also operate the substation, while the data center will be set up and operated by the company Witcom. Design of the electrical equipment - 110 kV switchgear in SF6-free design including control cabinets (9 fields with space reserve for two more) - Two 110/20 kV transformers with an output of 50/63 MVA (will be provided) - 20 kV primary switchgear // DSS system, air-insulated (23 fields) - 20 kV star-point switchgear // ESS system, air-insulated (11 fields) - Two 20 kV E-coils 52-520 A (dB) and 660 A (KB, 2h) (will be provided) - One earthing transformer up to 656 A (dB) and up to 660 A (KB, 2h) (will be provided) - Own use system AC and DC - 220 V DC battery system Division of the rooms in the transformer station - Basement O 2 pieces Transformer trays O Staircase (2x for SW Netz and Witcom) O Elevator for Witcom O Anteroom O Technical room O Goods elevator (2x for SW Netz and Witcom) O Battery room O Cable cellar (20 and 110 kV cables) O Cable shafts (2x 110 kV, 3x LWL, control cables, etc., 2x Witcom shaft) - Ground floor O 2 transformer rooms O Staircase (2x for SW Netz and Witcom) O Elevator for Witcom O Anteroom O Goods elevator (2x for SW Netz and Witcom) O Bma/ema room O 2 20 kV E-coil rooms O 1 earthing transformer room O 20 kV DDS primary and star point switchgear room O Cable shafts (2x 110 kV, 3x LWL, control cables, etc., 2x Witcom shaft) - First floor O 2 air spaces for the transformers O Staircase (2x for SW Netz and Witcom) O Elevator for Witcom O Anteroom O Sanitary rooms O 110 kV protection and control technology O AC auxiliary system room O DC auxiliary system room O 110 kV switchgear room O 2 Witcom shafts - Second and third floors: Witcom rooms (racks, technical rooms, etc.) Building including civil engineering The client will conduct a negotiated procedure with a prior competition for the award of construction services. Only the systems made available may be used to submit the application to participate. The client will check and evaluate the applications to participate received on time in terms of form and content. He will then ask the best-placed applicants (maximum of five) to submit a tender for the services advertised (start of the tender phase). The applicants/groups of applicants are selected for the tender and negotiation phase based on their suitability in terms of references and the qualifications of the project management in accordance with the competition. The invitation to submit a tender (aza) is issued secondarily. This describes the tasks to be performed in addition to the announcement, announces the evaluation criteria and the evaluation matrix, and provides further information on the subject matter of the contract, the contractual regulations and the service specifications. The incoming offers are checked for form and content. The client expressly reserves the right to enter into negotiations with selected bidders regarding their offers. If the client conducts negotiations regarding the offers, the remaining bidders are invited to the negotiation round and their offers are negotiated with them separately. Further negotiation rounds remain reserved. The offers are evaluated based on the evaluation criteria and the evaluation matrix announced there. Electrical systems The client is conducting a negotiated procedure with a prior competition for the award of construction services. Only the documents provided may be used to submit the application to participate. The client will check and evaluate the applications to participate received on time in terms of form and content. It will then invite the best-placed (maximum of five) applicants to submit an offer for the services advertised (start of the offer phase). The applicants/groups of applicants are selected for the offer and negotiation phase based on their suitability in terms of references and the qualifications of the project management in accordance with the competition for participation. The invitation to submit an offer (aza) is made secondarily. This describes the tasks to be performed in addition to the announcement, announces the evaluation criteria and the evaluation matrix, and provides further information on the object of the award, the contractual regulations and the service specifications. The incoming offers are checked in terms of form and content. The client expressly reserves the right to enter into negotiations with selected bidders regarding their offers. If the client conducts negotiations regarding the offers, the remaining bidders will be invited to the negotiation round and their offers will be negotiated with them separately. Further negotiation rounds remain reserved. The offers will be evaluated based on the evaluation criteria and the evaluation matrix announced there.