Tender Results of National Institute Of Standards And Technology Usa

Upgrade/retrofit Of Cmm Renishaw

2024 Society For Advancement Of Chicanos And Native Americans In Science Conference

Colinear Five Laser Module With Focusing Optics

Pilot Machine Replacement Felts

Brand Name Deepwave Digital Ruggedized Gpu-accelerated Software-defined Radios

Laser Etalon System As Described In The Attached Requirements Document And Combined Synopsis Solicitation.

Per The Attached Combined Synopsis Solicitation And Requirements Document.

The Due Date Of The Rfq Has Been Extended Until 12:00pm, July 19, 2024 Et. background: The National Institute Of Standards And Technology (nist) Fire Department Is Tasked With Fire Prevention And Emergency Response On The Nist Gaithersburg, Md Facility. The Nist Fire Department Has 15 Personnel That Require Structural Firefighting Gear That Follows The National Fire Protection Association (nfpa) Standards. The Nfpa 1851 Standard, Establishes Requirements For The Selection, Care, And Maintenance Of Structural Firefighting Protective Clothing And Equipment, Dictates Gear That Is10 Years Past Its Manufacture Dateshould Be Retired. Some Of The Department’s Gear Is Reaching The 10-year Age Limit, And Therefore Needs To Be Replaced. purpose: Replace The Nist Fire Departments 15 Personnel Equipment With New Standardized Structural Firefighting Garments. The Contractor Shall Assistance With Onsite Sizing Of Firefighters Using Individual Sizing Samples To Properly Fit Firefighters And Delivery The Gear To The Nist Fire Department. requirements: garments And Accessories Shall Be Compliant Per Nfpa 1971-2018. All Garments Are 3rd Party Tested By U.l. Underwriters Laboratory And The Manufacturer. general Specifications Protective Jacket And Pants For Structural Fire Fighting structural Gear Will Be Based On Brand Name Globe G-extreme 3.0 Or Equal.

Marketing, Branding, Communication, Strategic Development, Strategic Planning And Evaluation Of Projects Support Services For The Innovation & Industry Services Organization

The Government Is Posting Responses To Questions Recevied. the Due Date Of The Rfq Is Being Extended Until 12:00pm, July 19, 2024. the National Insitute Of Standards And Technology (nist) Chemical Sciences Division (csd) Provides The Measurement Science, Standards, Technology, Data And Chemical Informatics Required To Support The Nation’s Needs In The Determination Of Chemical Composition And Chemical Structure Of Gases, Organic, And Inorganic Species. Csd Is Involved In Developing Measurement Services To Support Ocean Carbon Metrology And Enhancing Nist’s Existing Capabilities For Greenhouse Gas Metrology. To Determine The Amount Fraction Of Carbon Dioxide (co2) In Air Samples And Dissolved Inorganic Carbon In Seawater, The Division Seeks To Procure A Custom Designed Borosilicate Vacuum Extraction Line Which Will Enable Researchers To Acidify A Sample Of Seawater With A Known Mass And Then Quantitatively Extract And Purify The Carbon Dioxide In The Seawater Sample. The Vacuum Extraction Line Will Be Modeled After The System Developed And Currently Used At Scripps Institution Of Oceanography In The Andrew Dickson Seawater Carbon Dioxide Reference Material Laboratory. objectives the Contractor Shall Provide Scientific Glass Blowing Services To Fabricate A Custom Borosilicate Vacuum Extraction Line Designed According To The Specifications Outlined By The Csd Laboratory. The Vacuum Line Construction Is Designed To Minimize The Adsorption Of Carbon Dioxide Onto The Glass And Valve Surfaces And Consists Of Four Modular Units On The Frontside With A Mirrored But Nonmodular Rear Vacuum Line. The First Section Of The Frontside Will Consist Of An Acidification Module/sample Introduction System Which Allows For The Delivery Of Phosphoric Acid From A 3 L Reservoir Into An Acid Chamber And Then To A Wong Pipette Designed To Deliver A Gravimetric Sample Of Seawater. Following The Acidification Module, Along The Second And Third Sections, The Liberated Gases From The Seawater Sample Must Be Purified Through A Series Of Low Temperature Traps – An Ethanol Slush Flask, A Liquid Nitrogen Flask, And Two Ethanol/liquid Nitrogen Traps. These Sections Require Connections To Pirani Pressure Gauges (3) And A Diffusion Pump (1). The Final Section, The Sample Collection Module Will Consist Of A Series Of Ports To Flame Seal The Purified Gas Samples. This Section Must Also Be Connected To A Pirani Pressure Gauge (1) And A Diffusion Pump (1). Preliminary Schematics Of The Vacuum Line And The Required/suggested Valves And Joints Are Provided In Appendix 1 And Appendix 2. Note, Design Changes And Substitutions May Be Warranted In Cases Where Adapters Are No Longer Available (e.g., Pirani Gauge Adaptors) Or If Contractor Recommends A More Suitable Substitute Or Design Change.