Fire Tenders

Description: Lot No.ws/mn/58/01/24-25/bg/cond./8w/coaches. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond./8w/coach With N.f Attachment Without Contents If Any. 1) Nc 024199 Gs 2) Eco 01202 Wgscn 3) Nf 047117 Wgaccn 4) Nw 044168 Gslrd 5) Se 028220 Wgscn 6) Nf 047112 Wgaccn , Nb: [1]. (a) All Coaches Are To Be Sold Without 24 Nos. Wheel Sets Complete Alongwith Roller Bearing , 10 Nos.serviceable Bogie Against Srl No.(01-02 Nos. Both Bogies Are Serviceable), (03-02 Nos. Both Bogies Are Serviceable), (04-02 Nos. Both Bogies Are Serviceable) And (05-02 Nos. Both Bogies Are Serviceable) And (06-02 Nos. Both Bogies Are Serviceable) With Complete Fittings, Biotanks And Other Excluded Fittings As Per Latest Excluded Fitting List No.m2/c-19/excluded Fittings/coach/1271 Dt.13.09.2018. (b) The Coaches Are To Be Sold With 02 Nos. Unserviceable Bogies Without Excluded Fittings. Against Srl No: 2 - 02 Nos. Nb[2]: Special Condition For Rolling Stock- A) All Excluded Materials Including Wheel Sets And Bogie, If Any, Are To Be Handed Over By The Purchaser At The Specified Location For Which The Purchaser Have To Arrange Labour/tools/ Equipment For Loading Of The Excluded Items From Cutting Site And Then Transport It To Specified Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Materials By Their Own Arrangement Including Labours And Hand Over The Same To: -(i) Sse 27-28, Bogies, Coil Spring, Screw Coupling, Buffer Sets Etc. (ii) Sse-19,wheel Sets. (iii) Sse-30, Dv, Aux Reservoir, Cr, Common Pipe Bracket, Alu. Water Tank, Bmbc, Etc. (iv) Sse-25, Bio Toilet. (v) Sse-51 Battery, Fan, Alternator, Etc. (vi) Sse-55 (all Ac Items) To Hand Over To Concern Stock Holder With Clear Acknowledgement. The Delivery Of Cut Pieces Of Last 10 Percent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. B). Delivery Witnessing Official Will Ensure That Such Nil Value Items Has Been Cleared By Purchaser Before Taking Cut Pieces Of Last 10 Percent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register "purchaser Clear All Nil Value Items Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site (c) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolley/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. Nb:-[3] Serviceable 10 Nos. Of Bogies With Complete Fittings And 24 Nos. Wheel Sets Complete Along With Roller Bearing, Biotanks And Other Excluded Fittings Are To Be Handed Over By The Purchaser At Specified Location As Advised By Concerned Sse At Kgp/ws. Nb: (4) The Firm Shall Follow All Rules Regarding The Loading Of Vehicle As Per Rto /statuary Bodies Governed Time To Time. Railway Will Not Be Responsible Any Breach Of Rules During Loading / Transportation Done By The Purchaser. Nb:[5] Delivery Will Be Given In Numbers. Nb:[6] The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property Is Near Vicinity Of The Cutting Spot Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery. And The Purchaser Will Be Solely Responsible Of Any Loss Applied ( Railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Of The Coaches, Transportation Loading And Unloading Of All Excluded Fittings Of The Coaches . Including Wheel Sets And Trolleys.

Description: Lot No.ws/mn/57/01/24-25/bg/cond./8w/coaches. Description- Iron And Steel Scrap Cutup Parts Of Bg Cond./8w/coach With N.f Attachment Without Contents If Any. 1) Nr X01204 Nmg 2) Se 038236 Wgscn 3) Nr 044724 Gslrd 4) Nr 034358 Wgscn 5) Nc 044778 Wgscn , Nb: [1]. (a) All Coaches Are To Be Sold Without 20 Nos. Wheel Sets Complete Alongwith Roller Bearing ,06 Nos.serviceable Bogie Against Srl No.(01-02 Nos. Both Bogies Are Serviceable), (03-02 Nos. Both Bogies Are Serviceable), (04-01no. End-1) And (05-01 No. End-2) With Complete Fittings, Biotanks And Other Excluded Fittings As Per Latest Excluded Fitting List No.m2/c-19/excluded Fittings/coach/1271 Dt.13.09.2018. (b) The Coaches Are To Be Sold With 04 Nos.unserviceable Bogies Without Excluded Fittings. Against Srl No: 2 - 02 Nos. Srl 4- 01no. Srl 5- 01 No. Nb[2]: Special Condition For Rolling Stock- A) All Excluded Materials Including Wheel Sets And Bogie, If Any, Are To Be Handed Over By The Purchaser At The Specified Location For Which The Purchaser Have To Arrange Labour/tools/ Equipment For Loading Of The Excluded Items From Cutting Site And Then Transport It To Specified Location By Their Own Arrangement/vehicle. They Have To Unload And Stack The Excluded Materials By Their Own Arrangement Including Labours And Hand Over The Same To: -(i) Sse 27-28, Bogies, Coil Spring, Screw Coupling, Buffer Sets Etc. (ii) Sse-19,wheel Sets. (iii) Sse-30, Dv, Aux Reservoir, Cr, Common Pipe Bracket, Alu. Water Tank, Bmbc, Etc. (iv) Sse-25, Bio Toilet. (v) Sse-51 Battery, Fan, Alternator, Etc. (vi) Sse-55 (all Ac Items) To Hand Over To Concern Stock Holder With Clear Acknowledgement. The Delivery Of Cut Pieces Of Last 10 Percent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Will Commence Only When All Excluded Fittings Arisen Out Of Sold Lot Has Been Successfully Handed Over To Custodian. B). Delivery Witnessing Official Will Ensure That Such Nil Value Items Has Been Cleared By Purchaser Before Taking Cut Pieces Of Last 10 Percent Of Lot Size (subject To Minimum Of 01 No. Rolling Stock) Delivery Witnessing Official Will Record Following Certificate On Sale Delivery Register "purchaser Clear All Nil Value Items Arisen After Cutting Of Sold Rolling Stock And There Is No Left Over Available At Cutting Site (c) The Rolling Stock May Either Be On The Cutting Line Or Grounded And May Or May Not Have Trolley/wheel Set Attached But The Purchaser Needs To Shift To Concerned Location As Advised By Concerned Sse. Nb:-[3] Serviceable 06 Nos. Of Bogies With Complete Fittings And 20 Nos. Wheel Sets Complete Along With Roller Bearing, Biotanks And Other Excluded Fittings Are To Be Handed Over By The Purchaser At Specified Location As Advised By Concerned Sse At Kgp/ws Nb: (4) The Firm Shall Follow All Rules Regarding The Loading Of Vehicle As Per Rto /statuary Bodies Governed Time To Time. Railway Will Not Be Responsible Any Breach Of Rules During Loading / Transportation Done By The Purchaser. Nb:[5] Delivery Will Be Given In Numbers. Nb:[6] The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property Is Near Vicinity Of The Cutting Spot Is Damaged In Any Way. The Purchaser Will Be Responsible For Any Damage/fire Accident To The Railway Property Caused During Operation And Delivery. And The Purchaser Will Be Solely Responsible Of Any Loss Applied ( Railway Employee Or Any Other Person) Caused Due To Any Activities Involved While Dismantling /cutting, Of The Coaches, Transportation Loading And Unloading Of All Excluded Fittings Of The Coaches . Including Wheel Sets And Trolleys.

Description: Scrap Condemned Diesel Loco No.13188 Wdg3a/udl Diesel Shed [qty. 01 No. 118 Mt Approximately].i.e 1. Chassis With Driver Cab Long Hood And Radiator Room With All Accessories, -01 Nos;2. Ht Cbc Coupler - 02 Nos;3. Air Brake Pipe- 01 Loco Set;4. Truck Frame Finished Casting With All Fitting - 01 Loco Set 5. Main Reservoir - 02 Nos 6. Power Pack Complete With Tg Assembly - 01 Loco Set;7. Radiator Cores - 01 Loco Sets 8. Radiator Fan Assembly And Complete Drive Units- 01 Loco Sets 9. Traction Motors- 06 Nos (01 Loco Set),10. Rectifier Units Complete - 01 Loco Set ,11. All Small Rotating Equipment Intact - 01 Loco Set, 12. Power Cable & Control Cable- 01 Loco Set,13. E. Power Contactor -01 Loco Set, 14. Battery- 08 Nos (01 Loco Set) Condition - [1]as Is Where Is Basis[2]cutting Allowed. [3] Wheel Sets 06 Sets, Axle Box 06 Pair & Bull Gear 06 Nos. Are Excluded From Sale. Excluded Item To Be Returned To The Custodian In Good Condition By The Purchaser At The Time Of Delivery. 4.the Purchaser Should Visit The Condemned Loco As Well As Its Actual Location Before Bidding, 5. The Scrap Loco Is Sold On As Is Where Is Basis Therefore Railways Does Not Guarantee For Quality Or Quantity As Per Description Etc. And Railways Is Not Responsible For Any Type Of Shortage During Delivery, 6.dismantling And Cutting Is Permitted For Loading And Delivery Purpose, 7. The Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles/vehicle And Necessary Trained Men For Cutting And Dismantling The Components Of The Condemned Loco As Per Requirements, 8. The Purchaser Is Required To Stack All The Reclaimable/excluded Items At One Location Well Away From The Cut Up Parts Of The Locos And It Is Required To Be Returned To The Custodian Before Affecting The Delivery. Purchaser Should Take Adequate Precaution During Dismantling Of Excluded Fittings Item So That The Same Can Be Return Over To The Custodian In A Sound, Undamaged And Intact Condition Otherwise Railway Reserve The Right To Recover The Amount Against Damaged Item Prior To The Delivery, 9. The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In The Near Vicinity Of Cutting Spot Are Damaged In Any Way. The Purchaser Will Be Held Responsible For Any Damage/fire Accident To The Railway Property Caused During Cutting Operation Or Delivery, 10. It Is The Responsibility Of The Purchaser To Segregate And Remove The Unwanted And Leftover Scrap Before Completion Of Delivery Of Loco. Purchaser Has Also To Keep The Cutting And Loading Spot Neat And Clean, Otherwise He May Be Penalized By The Railway, 11. The Purchaser Has To Comply All The Rules And Regulation Of Pollution Control Board Prevailing/existing In The Cutting Spot During Cutting And Dismantling Operation Of Condemned Loco, 12. The Purchaser Should Be Aware Of The Fact That Total Wt. Shown Against Heading [lot Wt. In Mt] In Lot Details Page Under Ireps Portal Is Indicative Only Against This Lot And Purchaser Should Note That During Delivery Of The Lot, The Above [lot Wt. In Mt] In Lot Details Page Is Not To Be Taken Into Consideration, 13. Bidders Are Required To Check The Detailed Conditions And Amendments / Modifications If Any, In Special Condition And In Depot Condition Against Each Lot Online For The Lot/catalogue Published For E-auction Purpose Before Bidding. Before Bidding Bidders Are Also Advised To Inspect And Tally Every Details Of The Lot Including Description, Location, Quantity, State, Hsn Code, Gst Percentage Etc With The Actual Material On Ground As Per Offer Kept With The Custodian And If Any Discrepancies Is Found, It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office For Further Action. No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale, 14.gst, Actual Tcs And Other Taxes Will Be Calculated At The Time Of Preparation Of Challan For Final Deposition Of Bsv.

Description: Scrap Condemned Diesel Loco No.13187 Wdg3a/udl Diesel Shed [qty. 01 No. 118 Mt Approximately].i.e 1. Chassis With Driver Cab Long Hood And Radiator Room With All Accessories, -01 Nos;2. Ht Cbc Coupler - 02 Nos;3. Air Brake Pipe- 01 Loco Set;4. Truck Frame Finished Casting With All Fitting - 01 Loco Set 5. Main Reservoir - 02 Nos 6. Power Pack Complete With Tg Assembly - 01 Loco Set;7. Radiator Cores - 01 Loco Sets 8. Radiator Fan Assembly And Complete Drive Units- 01 Loco Sets 9. Traction Motors- 06 Nos (01 Loco Set) ,10. Rectifier Units Complete - 01 Loco Set ,11. All Small Rotating Equipment Intact - 01 Loco Set, 12. Power Cable & Control Cable- 01 Loco Set,13. E. Power Contactor -01 Loco Set, 14. Battery- 08 Nos (01 Loco Set) Condition - [1]as Is Where Is Basis[2]cutting Allowed. [3] Wheel Sets 06 Sets, Axle Box 06 Pair & Bull Gear 06 Nos. Are Excluded From Sale. Excluded Item To Be Returned To The Custodian In Good Condition By The Purchaser At The Time Of Delivery. 4.the Purchaser Should Visit The Condemned Loco As Well As Its Actual Location Before Bidding, 5. The Scrap Loco Is Sold On As Is Where Is Basis Therefore Railways Does Not Guarantee For Quality Or Quantity As Per Description Etc. And Railways Is Not Responsible For Any Type Of Shortage During Delivery, 6.dismantling And Cutting Is Permitted For Loading And Delivery Purpose, 7. The Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles/vehicle And Necessary Trained Men For Cutting And Dismantling The Components Of The Condemned Loco As Per Requirements, 8. The Purchaser Is Required To Stack All The Reclaimable/excluded Items At One Location Well Away From The Cut Up Parts Of The Locos And It Is Required To Be Returned To The Custodian Before Affecting The Delivery. Purchaser Should Take Adequate Precaution During Dismantling Of Excluded Fittings Item So That The Same Can Be Return Over To The Custodian In A Sound, Undamaged And Intact Condition Otherwise Railway Reserve The Right To Recover The Amount Against Damaged Item Prior To The Delivery, 9. The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In The Near Vicinity Of Cutting Spot Are Damaged In Any Way. The Purchaser Will Be Held Responsible For Any Damage/fire Accident To The Railway Property Caused During Cutting Operation Or Delivery, 10. It Is The Responsibility Of The Purchaser To Segregate And Remove The Unwanted And Leftover Scrap Before Completion Of Delivery Of Loco. Purchaser Has Also To Keep The Cutting And Loading Spot Neat And Clean, Otherwise He May Be Penalized By The Railway, 11. The Purchaser Has To Comply All The Rules And Regulation Of Pollution Control Board Prevailing/existing In The Cutting Spot During Cutting And Dismantling Operation Of Condemned Loco, 12. The Purchaser Should Be Aware Of The Fact That Total Wt. Shown Against Heading [lot Wt. In Mt] In Lot Details Page Under Ireps Portal Is Indicative Only Against This Lot And Purchaser Should Note That During Delivery Of The Lot, The Above [lot Wt. In Mt] In Lot Details Page Is Not To Be Taken Into Consideration, 13. Bidders Are Required To Check The Detailed Conditions And Amendments / Modifications If Any, In Special Condition And In Depot Condition Against Each Lot Online For The Lot/catalogue Published For E-auction Purpose Before Bidding. Before Bidding Bidders Are Also Advised To Inspect And Tally Every Details Of The Lot Including Description, Location, Quantity, State, Hsn Code, Gst Percentage Etc With The Actual Material On Ground As Per Offer Kept With The Custodian And If Any Discrepancies Is Found, It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office For Further Action. No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale, 14.gst, Actual Tcs And Other Taxes Will Be Calculated At The Time Of Preparation Of Challan For Final Deposition Of Bsv.

Description: Ms Scrap ¿ 27.370 Mts- Delivery On Actual Weightment Basis. Lot No 5405 24 10 36 Gtl Gtl Ms Ap. Available With Sse P Way Bg Gtl. Scrap. Cond. And U/s. Released Ms Scrap Consisting Of (1)ms Liners T-3740-40000nos- Adopted Weight (0.230kgs) - 9.200mts (2)bolts And Nuts Off Size ¿ 98nos - Adopted Weight (1.195kgs) - 0.117mts. (3)glued Joints 60kg Pieces U/s ¿ 3nos - Adopted Weight (120kgs) - 0.360mts. (4)m.s.bracket Drg.no.t/4180 ¿ 37nos - Adopted Weight (8.000kgs) - 0.296mts. (5)m.s.bracket For Sej ¿ 52kg Drg.no.t/4181 ¿ 76nos - Adopted Weight (7.760kgs) ¿ 0.590mts. (6) M.s.bracket For Sej ¿ 52kg Drg.no.t/4182 ¿ 37nos - Adopted Weight (11.875kgs) ¿ 0.439mts. (7) Plate Screws T-3915 ¿ 144nos - Adopted Weight (0.475kgs) ¿ 0.068mts (8)gauge Tie Plates - 34nos- Adopted Weight (80.400kgs) - 2.734mts. (9) Ms Scrap(tonne) - 4.000mts. (10) Broken /crack 90r/52 Kg( C Fish Plates) ¿ 80nos- Adopted Weight (11.400kgs) - 0.912mts. (11) 90r Bend Fish Plates ¿ 344nos - Adopted Weight (12.400kgs) ¿4.266mts. (12) 90r Fish Plates ¿ 50nos - Adopted Weight (9.760kgs) ¿ 0.488mts. (13) Slide Chairs ¿ 200nos - Adopted Weight (19.5kgs) ¿ 3.900mts. Total Qty- 27.370 Mts. (approx). Available At Inside Of The Sse/p.way/bg/gtl Office Compound, Guntakal. S.s. No. G/w/gtl/ms/bg-gtl/2024-25/152 Dt.17/10/2024, . Sl No And St No. 1-13. Hsn Code: 720429/gst18%) Note To The Bidders 1) Successful Bidder Is Advised To Pay Bsv At The Earliest And Approach All The Concerned Witnessing Officials Immediately Along With Delivery Point Fixation Letter For Taking Loading To Avoid Last Minute Rush And Unforeseen Circumstances 2) Bidders May Visit The Site Of The Material For Physical Inspection Of The Material And Loading Spot Also, In All Aspects Before Bidding In E Auction.3) Post Auction No Representation Shall Be Entertained.4) For Photos Of This Lot, Kindly Click On View Lot Image On Bottom Left Side. 5) Gas/chisel Cutting Is Permitted, If Required, For Easy Loading And Transportation Purpose, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc To Avoid Any Mishap To Any Person, Railway Material Etc. Witnessing Officials To Ensure That The Lot Is Delivered As Per Lot Description. 6) In Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. 7) It Is The Responsibility Of The Purchaser/bidder To Return Excess Material, If Found During Gross Weighment, To The Nominated Premises Of The Custodian. 8) Clubbing Of The Lots, What So Ever, Is Not Permitted For Loading 9) Request For Fixation Of Delivery Point Should Be Invariably Raised In Ireps Online Only. Purchasers Are Requested To Make Use Of This Facility. No Representative Should Be Sent To The Office Of Sr.dmm/gtl For Collection Of Delivery Fixation Letter. As Soon As The Balance Sale Value Is Received By Railways Online, Delivery Order Will Be Issued Immediately, To Facilitate The Purchaser To Raise An Online Request For Fixation Of Delivery Point. 10 Railways Does Not Guarantee For Quality, Quantity Description Etc.

Description: Scrap Condemned Diesel Loco No.13195 Wdg3a/udl Diesel Shed [qty. 01 No. 118 Mt Approximately].i.e 1. Chassis With Driver Cab Long Hood And Radiator Room With All Accessories, -01 Nos;2. Ht Cbc Coupler - 02 Nos;3. Air Brake Pipe- 01 Loco Set;4. Truck Frame Finished Casting With All Fitting - 01 Loco Set 5. Main Reservoir - 02 Nos 6. Power Pack Complete With Tg Assembly - 01 Loco Set;7. Radiator Cores - 01 Loco Sets 8. Radiator Fan Assembly And Complete Drive Units- 01 Loco Sets 9. Traction Motors- 06 Nos (01 Loco Set),10. Rectifier Units Complete - 01 Loco Set ,11. All Small Rotating Equipment Intact - 01 Loco Set, 12. Power Cable & Control Cable- 01 Loco Set,13. E. Power Contactor -01 Loco Set, 14. Battery- 08 Nos (01 Loco Set ) Condition - [1]as Is Where Is Basis[2]cutting Allowed. [3] Wheel Sets 06 Sets, Axle Box 06 Pair & Bull Gear 06 Nos. Are Excluded From Sale. Excluded Item To Be Returned To The Custodian In Good Condition By The Purchaser At The Time Of Delivery. 4.the Purchaser Should Visit The Condemned Loco As Well As Its Actual Location Before Bidding, 5. The Scrap Loco Is Sold On As Is Where Is Basis Therefore Railways Does Not Guarantee For Quality Or Quantity As Per Description Etc. And Railways Is Not Responsible For Any Type Of Shortage During Delivery, 6.dismantling And Cutting Is Permitted For Loading And Delivery Purpose, 7. The Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles/vehicle And Necessary Trained Men For Cutting And Dismantling The Components Of The Condemned Loco As Per Requirements, 8. The Purchaser Is Required To Stack All The Reclaimable/excluded Items At One Location Well Away From The Cut Up Parts Of The Locos And It Is Required To Be Returned To The Custodian Before Affecting The Delivery. Purchaser Should Take Adequate Precaution During Dismantling Of Excluded Fittings Item So That The Same Can Be Return Over To The Custodian In A Sound, Undamaged And Intact Condition Otherwise Railway Reserve The Right To Recover The Amount Against Damaged Item Prior To The Delivery, 9. The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In The Near Vicinity Of Cutting Spot Are Damaged In Any Way. The Purchaser Will Be Held Responsible For Any Damage/fire Accident To The Railway Property Caused During Cutting Operation Or Delivery, 10. It Is The Responsibility Of The Purchaser To Segregate And Remove The Unwanted And Leftover Scrap Before Completion Of Delivery Of Loco. Purchaser Has Also To Keep The Cutting And Loading Spot Neat And Clean, Otherwise He May Be Penalized By The Railway, 11. The Purchaser Has To Comply All The Rules And Regulation Of Pollution Control Board Prevailing/existing In The Cutting Spot During Cutting And Dismantling Operation Of Condemned Loco, 12. The Purchaser Should Be Aware Of The Fact That Total Wt. Shown Against Heading [lot Wt. In Mt] In Lot Details Page Under Ireps Portal Is Indicative Only Against This Lot And Purchaser Should Note That During Delivery Of The Lot, The Above [lot Wt. In Mt] In Lot Details Page Is Not To Be Taken Into Consideration, 13. Bidders Are Required To Check The Detailed Conditions And Amendments / Modifications If Any, In Special Condition And In Depot Condition Against Each Lot Online For The Lot/catalogue Published For E-auction Purpose Before Bidding. Before Bidding Bidders Are Also Advised To Inspect And Tally Every Details Of The Lot Including Description, Location, Quantity, State, Hsn Code, Gst Percentage Etc With The Actual Material On Ground As Per Offer Kept With The Custodian And If Any Discrepancies Is Found, It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office For Further Action. No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale, 14.gst, Actual Tcs And Other Taxes Will Be Calculated At The Time Of Preparation Of Challan For Final Deposition Of Bsv.

Description: CATEGORY: Z6 R72 172-74-303-5 OR 273003510169 INSTRUCTION PLATE , Z6 R72 165-30-10SB 1 SHOCK ABSORBER , Z6 R72 5340-176220 BAND RETAINING DRG NO 432-24-064-1 , Z6 R72 MISC-GOST-6402-70 H-1012 WASHER 4.65G.06 , Z6 R72 5999-006714 CONTACTOR TKD -501-DOD , Z6 R72 1290-000682 OH SWITCH BOARD FIRE CONTROLE 902A , LV1 R72 175-70-024SB FAN , LV1 R72 GB-301-380- 2600MSB SHAFT FLEXIBLE MODEL GB-301-M-01 , LV1 R72 432-17-009-1 DRUM OUTER , LV1 R72 172-32-610 SHIELD REAR MIDDLE , LV1 R72 165-35-108 OR 165-35-108A WING NUT , LV1 R72 172-15-021SB-2 BRACKET , LV1 R72 175-37- 007SB-1 SWITCH ELECTRIC SMOKE GENERATING EQPT , LV1 R72 520-10-009-03 GASKET , LV1 R72 176-34-023 PACKING SHEET , LV1 R72 172-62-123 SPRING , LV1 R72 GOST 9650- 80 6-6D11X22 SPINDLE 6-6D11X22.38XC.2.35.5.45-5TS6XP , LV1 R72 172-31-129 GASKET , LV1 R72 432-40-199-1 GASKET , LV1 R72 432-40-089-1 GASKET , LV1 R72 5306- 056776 BOLT M6 X 16 DRG NO 520-01-008-03 , N1 R72 3040-023428 1 UPPER HOUSING ROTARY CONVEYR MANULDRIVE , LV1 R72 172-66-040-1 COUPLING , N1 R72 1015-004040 COVER FOR RAMMER , LV1 R72 ETU 500 40 BEARING 941 15 , LV1 R72 175.56.009SB NECK , Z6 R72 5930-028720 BUTTON 172-74-330 , N1 R72 5330-008526 GASKET FOR CARTRIDGE BASE DISPOSAL MECH DRG NO 165-17-205 , LV1 R72 5315050953 PIN HINGE DRG NO 172- 02-067-1 , N1 R72 5315-008523 PIN 4U8X18 OST-3-2234-80 , LV1 R72 175.04.045A STRAP , LV1 R72 GOST 17473-80 SCREW BM5X30-46-016 , LV1 R72 TU32-TSTBP-04-89 SEAL 10 6,5 , N1 R72 1015-004216 OR 1015-004130 GUIDE POST 1250 172-25-095 , LV1 R72 54-101-77SB A BOX , LV1 R72 172-62-038-2 LEAVER RIGHT HAND , LV1 R72 172-62-115-1 BUSHING , LV1 R72 432-95-333SB-1 APPLC PRESSING BUSG OF FINALDRIVECARRIER , LV1 R72 9GB-330-026 RMS 339 HAND WHEEL KNOB , LV1 R72 172-32-634 CAP , LV1 R72 5305099876 SCREW, BM4-6GX8.46.016 , Z6 R72 RSG-10M- 030 BOLT , LV1 R72 172-65-077 SUPPORT

Description: Scrap Condemned Diesel Loco No.13166 Wdg3a/udl Diesel Shed [qty. 01 No. 118 Mt Approximately].i.e 1. Chassis With Driver Cab Long Hood And Radiator Room With All Accessories, -01 Nos;2. Ht Cbc Coupler - 02 Nos;3. Air Brake Pipe- 01 Loco Set;4. Truck Frame Finished Casting With All Fitting - 01 Loco Set 5. Main Reservoir - 02 Nos 6. Power Pack Complete With Tg Assembly - 01 Loco Set;7. Radiator Cores - 01 Loco Sets 8. Radiator Fan Assembly And Complete Drive Units- 01 Loco Sets 9. Traction Motors- 06 Nos (01 Loco Set) ,10. Rectifier Units Complete - 01 Loco Set ,11. All Small Rotating Equipment Intact - 01 Loco Set, 12. Power Cable & Control Cable- 01 Loco Set,13. E. Power Contactor -01 Loco Set, 14. Battery- 08 Nos (01 Loco Set) Condition - [1]as Is Where Is Basis[2]cutting Allowed. [3] Wheel Sets 06 Sets, Axle Box 06 Pair & Bull Gear 06 Nos. Are Excluded From Sale. Excluded Item To Be Returned To The Custodian In Good Condition By The Purchaser At The Time Of Delivery. 4.the Purchaser Should Visit The Condemned Loco As Well As Its Actual Location Before Bidding, 5. The Scrap Loco Is Sold On As Is Where Is Basis Therefore Railways Does Not Guarantee For Quality Or Quantity As Per Description Etc. And Railways Is Not Responsible For Any Type Of Shortage During Delivery, 6.dismantling And Cutting Is Permitted For Loading And Delivery Purpose, 7. The Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles/vehicle And Necessary Trained Men For Cutting And Dismantling The Components Of The Condemned Loco As Per Requirements, 8. The Purchaser Is Required To Stack All The Reclaimable/excluded Items At One Location Well Away From The Cut Up Parts Of The Locos And It Is Required To Be Returned To The Custodian Before Affecting The Delivery. Purchaser Should Take Adequate Precaution During Dismantling Of Excluded Fittings Item So That The Same Can Be Return Over To The Custodian In A Sound, Undamaged And Intact Condition Otherwise Railway Reserve The Right To Recover The Amount Against Damaged Item Prior To The Delivery, 9. The Purchaser Is Required To Take Adequate Safety Measures So That No Railway Property In The Near Vicinity Of Cutting Spot Are Damaged In Any Way. The Purchaser Will Be Held Responsible For Any Damage/fire Accident To The Railway Property Caused During Cutting Operation Or Delivery, 10. It Is The Responsibility Of The Purchaser To Segregate And Remove The Unwanted And Leftover Scrap Before Completion Of Delivery Of Loco. Purchaser Has Also To Keep The Cutting And Loading Spot Neat And Clean, Otherwise He May Be Penalized By The Railway, 11. The Purchaser Has To Comply All The Rules And Regulation Of Pollution Control Board Prevailing/existing In The Cutting Spot During Cutting And Dismantling Operation Of Condemned Loco, 12. The Purchaser Should Be Aware Of The Fact That Total Wt. Shown Against Heading [lot Wt. In Mt] In Lot Details Page Under Ireps Portal Is Indicative Only Against This Lot And Purchaser Should Note That During Delivery Of The Lot, The Above [lot Wt. In Mt] In Lot Details Page Is Not To Be Taken Into Consideration, 13. Bidders Are Required To Check The Detailed Conditions And Amendments / Modifications If Any, In Special Condition And In Depot Condition Against Each Lot Online For The Lot/catalogue Published For E-auction Purpose Before Bidding. Before Bidding Bidders Are Also Advised To Inspect And Tally Every Details Of The Lot Including Description, Location, Quantity, State, Hsn Code, Gst Percentage Etc With The Actual Material On Ground As Per Offer Kept With The Custodian And If Any Discrepancies Is Found, It Is Required To Be Brought To The Notice Of The Custodian As Well As To This Office For Further Action. No Complaints/claim By The Purchaser Will Be Entertained In This Regard After E Auction Sale, 14.gst, Actual Tcs And Other Taxes Will Be Calculated At The Time Of Preparation Of Challan For Final Deposition Of Bsv.

Description: Scrap Released Industrial Waste Products Unserviceable For Railway Use 1 Coal /coke Ashes Debris Steam Coal And Hard Coke Dust Scrap Pieces Of Unserviceable Fire Bricks 2 Broken Piece Of Plain And Color Glass Mirror Porcelain Washbasin Commode Crockery Items Etc. 3 Unserviceable Cotton Rag Canvas Released From Coaches Old Unusable Hand Gloves Aprons Etc 4 Unserviceable Rubber Items Window Sealing Rubber Rubber Foam Pieces Gas Rubber Hose Pipes Shutter Felts Damaged And Condemned Rubber Hose And Pvc Pipe Pieces Damaged Torn Vacuum Hose Pipes Without Universal Couplings Small Broken Pieces Of Rubber Released From Roof Of The Coaches And Glass Wool 5 Unusable Timber Plywood Wooden Scrap Pieces Of Compreg Ply Broken Slates Pieces Of Berth Shutter Panel Etc Scrap Broken Pieces Of Released Packing Wood Timber Jolly Board Condemned Wooden Seats Without Rexene And Ferrous Fittings Wood Shavings Mixed With Sand And Rubbish 6 Released Packing Material Rubber Fibre Wooden Polythene Bags Gunny Bags Card Board Paper Puttah Gatta Thermocole Etc. Broken And Unserviceable Pieces Of Asbestos Cement Sheets Released From Shops 7 Unserviceable Old Lp Sheet Including Pop Rivet Seat Berth Number Plate Unuseable Off Cuts Of New Lp Sheet Unusable Pieces Of Limpet /nftc Sheet 8 Floor Sweeping Consisting Of Sand Mud Mud Muck Scrap Paper Shrubs Tree Branches Including Dried Grass And Leaves Coach-rust Rusty Nails Screws And Washers Unserviceable Aluminum Rivets Mixed With Sweepings And Ashes From Burn Material Mud And Muck Includes Unserviceable Pieces Of Stones Boulders Broken Concrete Foundations And Unserviceable Pieces Of Other Bricks Oily Greasy Rags Oily Dirt And Mud Mixed With Rubbish Heaps Excluding Sludge Oil 9 Unserviceable Off-cuts Of Fresh Rexene Pvc Sheet Coir Recron Foam Released And Unserviceable Rexene Pvc Sheet Coir Recron Foam 10 Unserviceable Frp Products Like Window Shutters Louvers Inlay Lavatory Wall Protectors Wash Basin Fish Tails Banjo Shutter Front Cover Or Axle Box Mouldings 11 Unserviceable Nylon Plastic Bushes Nylon Wire Rope And Other Nylon Items Broken Welding Hand Screen Helmet Face Shield 12 Unserviceable Bakelite Bakelite Box With Screws Broken And Condermned Bakelite Cover Of Tumber Switch And Fuse Without Non-ferrous Fitting Mcb With Embedded Material Except Aluminum And Copper, Ceramic Pieces Plastic Pvc Sheet And Sleeves Broken Pieces Of Electric Switches Battery Floats Flexible Pipes Unserviceable Broken Tube Lights And Bulbs Fuse Without Non-ferrous Fittings Broken Damaged Pieces Of Insulating Material 13 Engineering Garbage Not Required By Iow And Generated Inside Workshop Like Tree Branches Loose Earth Etc 14 Following Unserviceable Items Released From Poh Activities -bp And Fp Houses With End Ferrous Parts, Unserviceable Buffer Pads And Draft Pads, Frp Main Door Embedded With Ferrous Window Bars Handle Latch Etc Frp Window Shutters With Embedded Ferrous Material, Unserviceable Lavatory Door Vestibule Door Fiied With Latch/handle And Ferrous Mouldings Etc, Hdpe Commode Chute With Ferrous Bracket And Supporting Ring,plastic Spool With End Pieces Of Filler Wire. 15 Ferrous Pieces Mixed With Rubbish Weighing Not More Than 500gms 16 Any Item Of Industrial Waste Not Covered Above As Advised In Writing By The Site Engineer In Charge. As Is Where Is Basis. Loading By Purchase. Location Of Material : Iwp Scrap Section Of Dump Yard At Lower Parel Workshop, Maharashtra. Custodian : Sse/ys/scrap/pl (total Approximate Weight 100 Mt.) Note 1) The Above Items Are Expected Generation Of Various Items In The Workshop. The Railway Does Not Guarantee Availability Of All Types Of Industrial Waste At All Times In The Same Proportion Some Item May Be Even Zero 2) The Railway Will Not Accept Any Claim For Availability Of Any Specific Items Or Their Quantities 3) No Material Other Than Above Shall Be Permitted To Be Lifted 4) Mode Of Delivery Will Be In Metric Tonne. No Sorting & Pick And Choose Of Material Will Be Allowed.

Description: Scrap And Unserviceable Condemned Mix M.s. Coach Cutting Items Such As Body Side Door M.s., P.o.h. Coaches Realised Corroded Pieces,air Brake,clamp,pipe Pin,m.s. Door Of Battery Box ,m.s.ventilation Door,foot Plate,ice Box,m.s. Spring,m.s. Angle,and M.s. Lader With Rubber Coating,coach Cuttings, Coach Doors , Seat Frames , Bearth/seat Frames, Light Head Stock Cuttings, Train Lighting Fittings, Train Lighting Fittings, Side Lamps Lamp Hand Signal, Fittings, Tail Lamp Fittings, Cft/tl Light Fittings, Ictp/ Icfp Empty Swich Boxes Tail Lamps, Tube Light Fittings, Tube Light Jali, Fan Blades, Fan Jali, Fan Guards Fan Ribs, Fan Rings, Empty Power Pannels, Signal Platform, Destination Board, Valley Board, Letter Board,ms Signal Base, Loc, Inercooler, Nut Bolts And Other Hardwares, M S Furniture.m S Wheel Stand,window Grill, Ms Measuring Cans, Tins, Racks, Break Pipes, Silencer Of Tower Wagon, Dust Bin, Ms Pipe And Cut Pcs. Of Ms Pipes, Rods, Ms Bars Released From Broken Constructin, Compressor Spring, Wire /coil Springs, Ms Rope Wire, Pcs. Of Brake Beam Pipes, Stands, M S Ferrous Light Junk Kachra Related Scrap I.e Ms Angles, Chanels, Flats Pcs. Of Cable Racks/laders Ms Brackets , Dust Bin Stand , Tin Fuse Box, Fire Extinguisher, Empty Glow Sign Boards, Empty Electrical Pannel, Ms Stand, Oven, Earthing Patti, Empty Cable Tray, Fly Catcher, Galvanized Patra / Sheet And Their Cut Offs , Plain/ Corrugated / Toughened Sheets And Its Cut Pcs. Such As Strips, Patties, Patties, Patra, Rings, Coils, Boxes, Ms Brake Control Cover, Patra, Angle, Small Springs, Pins, Wire , Coil, Collapsible Doors And Shutters And Their Parts/cut Offs, Grills , Channel Grills, Compound /bridge Jali With Or Without Frame, Ms Fencing And Their Parts, Fencing Patties, Angle Pcs., Frames,wire Mesh, G.i./ms Pipes And Tubes , Tubes And Their Cut Pcs, Damaged Gi/ Ms Pipes/ Rods/tubes And Their Pcs. , Ms/galvanised Boxes, Junction Box, Switch Boxes, Empty Convertor, Payary (steps), Filters, Rings, Nut Bolts, U Clips, Pipe Pin, Gate M/c Dismentled, Liquid Container, Damaged Video Boxes And Their Cut Offs, Crt Cabinet, Location Boxes , Jumper, Jumper Box,ground Connections , Basket Steel, Water Cane/ Material Carring Trolley,steel Baskets, Containers, Trays, Frames, Stretchers, Nets/ Jali , Released Ground Connection, Halogen, Panto Pans, Compressor Spares, Dust Guard, Air Filters And Filter Covers, Ms/gi Duct And Its Parts,insulating Armature Of Signal Cable, Hand Lamps, Side Lamps, Signal Lamps, Petromax, Hs Lamp, Clamps, Signal Post,signal Platform, Signal Base, Ms/ Gi Wire/ Coil, Funnels, Wall Protectors, Boxes, Iron Bar Pcs Released From Broken Construction , Desmantelled Weighing Machines Parts/ Covers Etc. Ms Pipe With Or Without Ci Attachment, Bins, Plates, Rings, Spares/parts /body Of Weighing Machine , Platform Weighing Machine And Its Parts, Pressure Switches And Other Switches , Signal Parts, Location Boxes,panel Board,fuse Box,mdb Board,pedestial For Lc Gate And Their Cut Parts And Other Ferrous Misc. Scrap Items With Or Without Nf/ss/wooden /rubber / Rexine Attachments Of Sorts And Sizes, Broken And Damaged, U/s For Rly. Use, Excluding Items: Rail And Rail Pcs., Axles And Axle Pcs., Wheel Tyre And Pcs., Cam Shafts, Helical Springs, Bolster Springs, Buffer Plungers, Face Plates, Axle Box Housings/ Casings, Brake Beams, Fish Plates, Screw Couplings/draw Bar Hooks, Break Beams, Reservoir Tanks, St Sleepers And Other Nf Items, Lbp.. Note: Hammering/ Pressing/ Cutting Is Permitted For Easy Loading Only, (qty Approx)