Fire Tenders

Description: 52 Kg Rails- 29.423 Mt-delivery On Sectional Weighment Basis. Lot No. 5462 24 10 62 Gtl Kqa R Ap. Available With Sse P W Vki Scrap Cond. And U/s Released Class Iii 52kg Rails -89 Nos- 567.020 Rm-29.423 Mt. Total Qty: 29.423 Mt. Approx. Available In Kondagunta Yard At Km 9/31-33. Ss No. G/w/gtl/52kg Rail/vki/2024-25/144, Dt.03.10.24. Sl No 1 And St No. 1. Hsn Code: 730210 - Gst 18%. Note To The Bidders 1) Successful Bidder Is Advised To Pay Bsv At The Earliest And Approach All The Concerned Witnessing Officials Immediately Along With Delivery Point Fixation Letter For Taking Loading To Avoid Last Minute Rush And Unforeseen Circumstances 2) Bidders May Visit The Site Of The Material For Physical Inspection Of The Material And Loading Spot Also, In All Aspects Before Bidding In E Auction.3) Post Auction No Representation Shall Be Entertained.4) For Photos Of This Lot, Kindly Click On View Lot Image On Bottom Left Side. 5) Gas/chisel Cutting Is Permitted, If Required, For Easy Loading And Transportation Purpose, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc To Avoid Any Mishap To Any Person, Railway Material Etc. Witnessing Officials To Ensure That The Lot Is Delivered As Per Lot Description. 6) In Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. 7) It Is The Responsibility Of The Purchaser/bidder To Return Excess Material, If Found During Gross Weighment, To The Nominated Premises Of The Custodian. 8) Clubbing Of The Lots, What So Ever, Is Not Permitted For Loading 9) Request For Fixation Of Delivery Point Should Be Invariably Raised In Ireps Online Only. Purchasers Are Requested To Make Use Of This Facility. No Representative Should Be Sent To The Office Of Sr.dmm/gtl For Collection Of Delivery Fixation Letter. As Soon As The Balance Sale Value Is Received By Railways Online, Delivery Order Will Be Issued Immediately, To Facilitate The Purchaser To Raise An Online Request For Fixation Of Delivery Point. 10 Railways Does Not Guarantee For Quality, Quantity Description Etc.

Description: CATEGORY: Bucket Side Cutter Nut JCB 3DX Super , Cold Start Kit JCB 3DX Super , Bonet Hinge JCB 3DX Super , Bonet Fork JCB 3DX Super , Thumb Screw Bonet JCB 3DX Super , Bonet Stay JCB 3DX Super , Front Grill JCB 3DX Super , Front Grill Lock Assy JCB 3DX Super , Front Pressing Bumper JCB 3DX Super , Decal JCB Insignia JCB 3DX Super , Step Cab Upper JCB 3DX Super , Engine Side Pannel Plate LH JCB 3DX Super , Engine Side Pannel Plate RH JCB 3DX Super , Engine Side Pannel Top Brace LH JCB 3DX Super , Engine Side Pannel Top Brace RH JCB 3DX Super , Link Rear Winodw Left Hand JCB 3DX Super , Link Rear Window Right Hand JCB 3DX Super , Rear Window Handle RH JCB 3DX Super , Rear Window Handle LH , Rear Window Bearing JCB 3DX Super , Rear Window Carrier Bearing JCB 3DX Super , Window Side Handle JCB 3DX Super , Mat Floor JCB 3DX Super , Shield Top JCB 3DX Super , Shield RH JCB 3DX Super , Shield LH JCB 3DX Super , Cover Excavator JCB 3DX Super , Clamp Ring Excavator JCB 3DX Super , Roof Cab Yellow JCB 3DX Super , First Aid Box JCB 3DX Super , Stout Safety Assembly JCB 3DX Super , Fire Extinguisher Band JCB 3DX Super , Maxi Fuse Mtg Bkt JCB 3DX Super , Cluster Warning Light JCB 3DX Super , Lever Parking Brake JCB 3DX Super , Lever Assembly Trottle Control JCB 3DX Super , Slew Ram Hose JCB 3DX Super , Switch Oil Temp Txn JCB 3DX Super , Fan Spacer JCB 3DX Super , Filter Hyd O Ring JCB 3DX Super

Description: Wheel Sharf - 25.000 Mt-delivery On Actual Weighment Basis. Lot No. 5312 25 01 01 Gtl Gy Ws Ap. Available With Sse C W Gy. Scrap, Condemned, Released, Unserviceable Wheel Swarf. Total Qty 25.000 Mt (approx) (delivery On Actual Weighment Basis). Available At Opposite To Atc In Bin No. 02 And 03 At Box N Depot Gooty. Ds-8 No. 531200054, Dated 20.12.24. Hsn Code: 720429 - Gst 18%. Note : For Taking Delivery Of Boring, Purchaser Should Ensure Coverage Of Body And Top Portion Of Truck To Arrest Leakage Of Boring In Enroute To Avoid Damages To The Vehicles Of Road User). Special Note : After Loading The Material Spilled Over Boring Chips Have To Be Cleaned By The Purchaser (i.e Loading Area) Note To The Bidders 1) Bidders May Visit The Site Of The Material For Physical Inspection Of The Material And Loading Spot Also, In All Aspects Before Bidding In E Auction.2)post Auction No Representation Shall Be Entertained.3) For Photos Of This Lot, Kindly Click On View Lot Image On Bottom Left Side. 4) Gas/chisel Cutting Is Permitted, If Required, For Easy Loading And Transportation Purpose, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc To Avoid Any Mishap To Any Person, Railway Material Etc. Witnessing Officials To Ensure That The Lot Is Delivered As Per Lot Description 5) In Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. 6) It Is The Responsibility Of The Purchaser/bidder To Return Excess Material, If Found During Gross Weighment, To The Nominated Premises Of The Custodian. 7) Clubbing Of The Lots, What So Ever, Is Not Permitted For Loading 8) Request For Fixation Of Delivery Point Should Be Invariably Raised In Ireps Online Only. Purchasers Are Requested To Make Use Of This Facility. No Representative Should Be Sent To The Office Of Sr.dmm/gtl For Collection Of Delivery Fixation Letter. As Soon As The Balance Sale Value Is Received By Railways Online, Delivery Order Will Be Issued Immediately, To Facilitate The Purchaser To Raise An Online Request For Fixation Of Delivery Point. 9) Railways Does Not Guarantee For Quality, Quantity Description Etc.

Description: Centre Pivots- 12.980mt- Delivery On Actual Weighment Basis Lot No 5312 25 01 05 Gtl Gy Pivots Ap Available With Sse C W Gy . Scrap Cond. And U/s Released Rolling Stock Consisting Of 04 Items : 1) Bogie Centre Pivot Top-110 Nosx38 Kgs-4.180mts, 2) Flat Centre Pivot Top ¿ 50nosx68kgs-3.400mts, 3) Flat Bottom Pivot 35nosx45kgs-1.575mts, 4) Centre Pivot Bottom Modified 85 Nosx45kgs-3.825 Mts. Total Qty As Per Ds-8 12.980mt. Approx. Available At Gooty Boxn Roh Depot Scrap Yard, Behind Atc. Ds-8 No:531200056, Dated:20.12.24. Hsn Code 720429 /gst 18%. Note To The Bidders 1) Bidders May Visit The Site Of The Material For Physical Inspection Of The Material And Loading Spot Also, In All Aspects Before Bidding In E Auction.2) Post Auction No Representation Shall Be Entertained.3) For Photos Of This Lot, Kindly Click On View Lot Image On Bottom Left Side.4) Gas/chisel Cutting Is Permitted ,if Required, For Easy Loading And Transportation Purpose, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc To Avoid Any Mishap To Any Person, Railway Material Etc. Witnessing Officials To Ensure That The Lot Is Delivered As Per Lot Description 5) In Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. 6) It Is The Responsibility Of The Purchaser/bidder To Return Excess Material, If Found During Gross Weighment, To The Nominated Premises Of The Custodian. 7)clubbing Of The Lots, What So Ever, Is Not Permitted For Loading 8) Request For Fixation Of Delivery Point Should Be Invariably Raised In Ireps Online Only. Purchasers Are Requested To Make Use Of This Facility. No Representative Should Be Sent To The Office Of Sr.dmm/gtl For Collection Of Delivery Fixation Letter. As Soon As The Balance Sale Value Is Received By Railways Online, Delivery Order Will Be Issued Immediately, To Facilitate The Purchaser To Raise

Details: Notice Inviting E-tender Punjab & Sind Bank, Guwahati Zonal Office Invites E- Tenders Under 2 Bids System I.e. Technical Bid & Financial Bid, From Reputed, Bona Fide And Intending Contractors In The Prescribed Format For Proposed Interior Furnishing, Electrical, Lan Cabling, Ac Works, Cctv, Fire Alarm & Civil Work For Interior Renovation & Re-furnishing Of Model Branch At R.g.barua Road, Chandmari, Guwahati, Assam. The Tender Is To Be Submitted Only By Eligible Furnisher Through Online Mode Only. Tender Documents, Technical Specification, Drawing, Bill Of Quantities Uploaded On Specific Interface Which Will Be On The Bank’s E-procurement Site. Furnisher May View The Tender Notice On Bank’s Website Https://punjabandsindbank.co.in And Download & Upload The Same From/on Bank’s E-procure Website Https://psb.eproc.in The Tender Should Be Uploaded On The Above Website Up To 17.02.2025 By 03.00pm. Technical Bid Will Be Opened On 17.02.2025 At 3.30pm. As Mentioned In The Tender Documents. The Bank Reserves Right To Cancel Any Or All Tenders And Stop The Process At Any Point Of Time Without Assigning Any Reason Or Notice Whatsoever. For Any Further Clarification/query Contact-+91-7896536440 During Office Hours From 10.00 Am To 5.00 Pm Over Phone Or In Person. Zonal Manager Click Here

Details: Description :supply And Installation Of Composite Insulated Aluminum Embedded Panel Along With Support Frames For Vertical Surf ace Thermal Insulation As Per Specification Given Below: 1) Panel Overall Thickness- 4 Mm, Coil Thickness- 0.50 Mm, Core - Low Densi ty Polyethylene (ldpe) And High Density Poly Ethylene (hdpe), Tensile Strength - Minimum Tensile 130 N/mm2 As Per Is 737-2008, fire Retardant Properties- B1 Standard In Accordance With Din 4102 Surface Finish - Exterior Face Coil Coated With Pvdf And Inner Fa ce Coil Coated With Polyester, Panel Dimension: 3657 Mm (h) X 1219 Mm (w) - Qty- 20 Nos/set, 2) Anodized Aluminum Sq Channel: 3048 Mm (l) X 38 Mm (w) X 25 Mm (h)- 70 Nos/set, 3) Alkoxy 1-part Room Temperature Vulcanizing Silicone Sealant With Skin-over time (23 Degree C Or 73 Degree F, 50% R.h.) In 12 Minutes ; Confirming To En 15651- 20 Nos/set, 4) Fitment Accessories And Cons umables - 1 Set. 5).total Panel Enclosed Qty- 69.76 Sq Mtr /set. [ Warranty Period: 12 Months After The Date Of Delivery ] ]

Details: SET OF SEATS & BERTHS FOR LHB GS COACHES. FOLLOW CUSHIONING MATERIAL PU F OAM TO RDSO SPEC. RDSO/2007/CG-04 REV.-01 AND UPHOLSTERY TO RDSO SPEC.RDSO/2008/CG-07 REV.-01 WITHOUT FIRE BARRIER. FOLLOW COLOUR SHADE ALNAC-03 FOR UPHOLSTERY. FOR PAINTIN G OF THE VISIBLE METALLIC PORTIONS OF SEATS & BERTHS COLOUR SHADE RAL-9006 TO BE FOLLO WED., as per Drawing: MPLSEATGS VERSION 0, Packing Instruction: ALL PROTRUDING PORTIONS OF S EAT/BERTH SHOULD BE PROTECTED WITH ENVIRONMENT FRIENDLY PRE MOULDED THERMOCOL CAP OF REQUISITE STRENGTH OR SILICON RUBBER CAP AS AN ALTERNATE OPTION. EACH INDIVIDUAL SEA T/BERTH SHOULD BE COVERED WITH BIODEGRADABLE BUBBLE SHEET OF DIAMETER 10MM AND THIC KNESS 30 MICRON ALL ROUND. FLAP OF BERTH SHOULD BE OUTSIDE THE BUBBLE SHEET PACKING LE AVING SEAT & BERTH MOUNTING UNCOVERED. THEN IT SHOULD BE WRAPPED ALL ROUND IN THICK L AMINATED JUTE FABRIC OF SUFFICIENT STRENGTH. THE ASSEMBLY SHOULD BE TIED WITH NYLON STR IPS. IT IS FURTHER WRAPPED WITH BIODEGRADABLE POLYTHENE ALL ROUND TO PREVENT INGRESS O F DUST/WATER. FOR THE FOLLOWING ITEMS (IF COVERED UNDER S&B SET) THE ITEM-WISE PI (LATEST VER.) WILL B

Details: Notice Inviting E-tender Punjab & Sind Bank, Guwahati Zonal Office Invites E- Tenders Under 2 Bids System I.e. Technical Bid & Financial Bid, From Reputed, Bona Fide And Intending Contractors In The Prescribed Format For Proposed Interior Furnishing, Electrical, Lan Cabling, Ac Works, Cctv, Fire Alarm & Civil Work For Interior Renovation & Re-furnishing Of Model Branch At Deulahland, Imphal, Manipur. The Tender Is To Be Submitted Only By Eligible Furnisher Through Online Mode Only. Tender Documents, Technical Specification, Drawing, Bill Of Quantities Uploaded On Specific Interface Which Will Be On The Bank’s E-procurement Site. Furnisher May View The Tender Notice On Bank’s Website Https://punjabandsindbank.co.in And Download & Upload The Same From/on Bank’s E-procure Website Https://psb.eproc.in The Tender Should Be Uploaded On The Above Website Up To 26.02.2025 By 03.00pm. Technical Bid Will Be Opened On 26.02.2025 At 3.30pm. As Mentioned In The Tender Documents. The Bank Reserves Right To Cancel Any Or All Tenders And Stop The Process At Any Point Of Time Without Assigning Any Reason Or Notice Whatsoever. For Any Further Clarification/query Contact-+91-7896536440 During Office Hours From 10.00 Am To 5.00 Pm Over Phone Or In Person. Zonal Manager Click Here

Description: CATEGORY: LED Screen AS PER POINT 1 AND 1.1 OF SPECIFICATION , ROUND LED Screen AS PER POINT 2 AND 2.1 OF SPECIFICATION , ROUND LED Screen AS PER POINT 2.2 OF SPECIFICATION , Holo showcase AS PER POINT 3 AND 3.1 OF SPECIFICATION , Holo showcase AS PER POINT 3.2 OF SPECIFICATION , Interactive Kiosk AS PER POINT 4 AND 4.1 OF SPECIFICATION , VR headset AS PER POINT 5 OF SPECIFICATION , Hologram Table AS PER POINT 6.1 OF SPECIFICATION , Hologram Table AS PER POINT 6.2 OF SPECIFICATION , Tunnel for Immersive VR Experience AS PER POINT 7.1 OF SPECIFICATION , Tunnel for Immersive VR Experience AS PER POINT 7.2 OF SPECIFICATION , Tunnel for Immersive VR Experience AS PER POINT 7.3 OF SPECIFICATION , Tunnel for Immersive VR Experience AS PER POINT 7.4 OF SPECIFICATION , Tunnel for Immersive VR Experience AS PER POINT 7.5 OF SPECIFICATION , Tunnel for Immersive VR Experience AS PER POINT 7.6 OF SPECIFICATION , Tunnel for Immersive VR Experience AS PER POINT 7.7 OF SPECIFICAITON , Tunnel for Immersive VR Experience AS PER POINT 7.8 OF SPECIFICATION , Carpet AS PER POINT 8 OF SPECIFICATION , False ceiling AS PER POINT 9 OF SPECIFICATION , Three seater sofa AS PER POINT 10 OF SPECIFICATION , Single seater sofa AS PER POINT 11 OF SPECIFICATION , Center Table AS PER POINT 12 OF SPECIFICATION , LED projector AS PER POINT 13 OF SPECIFICATION , Digital cables AS PER POINT 14 OF SPECIFICATION , Cat 6 Cable AS PER POINT 15 OF SPECIFICATION , Acrylic interior emulsion paint AS PER POINT 16 OF SPECIFICATION , Floor standing shell structure AS PER POINT 17 OF SPECIFICATION , Providing signage AS PER POINT 18 OF SPECIFICATION , Providing signage AS PER POINT 19 OF SPECIFICATION , Providing AND fixing signage AS PER POINT 20 OF SPECIFICATION , Reverse J Shape shell structure AS PER POINT 21 OF SPECIFICATION , FRLS PVC insulated copper conductor AS PER POINT 22 OF SPECIFICATION , Steel conduit AS PER POINT 23 OF SPECIFICATION , GI box AS PER POINT 24 OF SPECIFICATION , Modular switch OR socket AS PER POINT 25 OF SPECIFICATION , Surface OR recess mounting AS PER POINT 26 OF SPECIFICATION , Miniature circuit breaker AS PER POINT 27 OF SPECIFICATION , Certificate printing Kiosk AS PER POINT 28 OF SPECIFICATION , LED graphic screen AS PER POINT 29 OF SPECIFICATION , Touch Panel AS PER POINT 30 OF SPECIFICATION , History corridor set AS PER POINT 31 OF SPECIFICATION , Micro spotlight AS PER POINT 32 OF SPECIFICATION , Android tablets AS PER POINT 33 OF SPECIFICATION , Planters AS PER POINT 34 OF SPECIFICATION , Online UPS AS PER POINT 35 OF SPECIFICATION , Fire Extinguisher cylinders AS PER POINT 36 OF SPECIFICATION

Description: U/s Condemned M.s. Misc. Ferrous Scrap 1) Scrap Steel Light Piece - Nuts, Bolts, Fasteners, Split Pin (various Kind), Small Fitting, Pins, Keys,spikes, Washers, Rivets, Of Various Size And Type Scrap, Bldc Fan Jali, Dc Fan Jali, Fan Base, Fan Body Pieces, Rld Emergency Light W/o Battery , Rld Battery Boxes Non Ac, Rld Dc, Carriage Fan Jali, Rld Suspension Hanger Pin, Rld Battery Box Cover Non Ac, Coil Spring Of Different Diameter, Galvanized Sheets, M.s. Fabricated Structure, Fire Extinguisher. (mp5) Total 10,000 Kgs 2) Tanks, Gasholder - Auxillary Reservoir Tank (st2) Total 500 Kgs 3)steel Fabrication - Foot Board, Scrap Steel Fabrication ( Heavy And Misc. Large/bulky Assemblies) (withouttrolley), M.s. Door Frame And Pipe Of Various Size, Axle Guide Helical Spring (hf1) Total 3000 Kgs 4) Mixed Melting Scrap - Retainer Ring, Bss Hanger, Bss Hanger Stone, Control Arm , Anchor Link, Lss Bar, Screw Coupling, Draw Bar , Axle Box, Brake Disc, Centre Pivot Pin For Coach , Draft Yoke For Draw Gear, Draw Bar And Castle Nut For Draw Gear Arrangement, Draw Gear Pin For Draw Gear, Side Buffer Casting (casting) For Coach, Side Buffer Enhanced Capacity For Coaching, And Hand Rail With Fixing Screw, Lower Spring Seat Hanger, Lower Spring Beam, Equalizing Stay Pin, Lever Hanger, Traction Lever, Centering Disc, Anti Roll Bar, Roller Bearingparts, Ctrb, Brake Disc (mms) Total 12,000 Kgs 5) Mf - 10 Scrap Junk Kutchara - Tin And Galvanized Sheet Strips And Cutting (mf 10) Total 3000 Kgs 6) Scrap Plate/sheet Cutting ( In Mixed Lengths, Widths And Shapes) (pl/8) Total 500 Kgs 7) Scrap Steel Castings, Pivots (cs 1) Total 1000 Kgs 8) Scrap Bar Fittings (bar Work, Fabrication Etc Not In Re-rollable Condition Of Different Size. (b/10) Total 1000 Kgs 9) Scrap Coil Spring - Springs (ax;e And Bolster) (sp3) Total 4000 Kgs 10) Scrap Buffer Cases - Buffer Plunger (mp 2) Total 1000 Kgs 11) Scrap Low Phosphorous Ste - Draw Hook (pt1) Total 4000 Kgs Total Wt (approx) 40,000 Kgs (40 Mt)