Fire Tenders

Details: Construction for Development of Heliport at Rakkar in Tehsil Dharamshala District Kangra (HP). (Sub Head- Construction of Passanger Terminal Building, Fire station building, Utility building,Pavement, Drain, under ground water tank ,Over head water tank, Chain link fencing, Main gate, Operational gate,Watch tower, Security hut,septic tank , Rain Harvesting Tank , Boundary wall & Chain link fencing, Retaining wall, External water supply, sewerage & Drainage).

Details: A/mtc. of Office Building Sector-3, Rohtak. “Refilling of Service of ABC Stored pressure type Fire Extinguisher 5Kg, 6Kg & 10 Kg capacity filled with ISI Marked Powder and P/F aluminum window, High Back Chair, in Office Building Sector-3, Rohtak and all other works contingent thereto." A/c Rs.2.00 Lacs E/M Rs. 4000/- Time Limit One (01) Month

Details: Samples Scheme report for construction of bacteriologial sections at district water testing lab MANSA Providing fixing Electrical work, Public Health work , Fire fighting, Installing Air Conditioner ,Providing fixing aluminium door window partition wall ,Providing Modular Lab Furniture, Misc work and Civil work, Site laying and other work conigent there too) 4215-01-102-36-99-53(60%)4215-01-789-13-99-53(40%)

Details: Description :self Adhesive Insulation Material Size 5x1250x1250mm, As Per Drawing/specification: mdts-116 Revision 6. Sample Should Be Approved By The Consignee Before Bulk Supply. All Testing Must B e Performed By A Laboratory Accredited By The National Accreditation Board For Testing And Calibration Labo ratories (nabl) For The Specific Test, Regardless Of Whether The Test Falls Within The Nabl Scope, With The Exc eption Of The Tests Like Dimensional Check, Thickness, Colour, Surface Finish, Which May Be Carried Out In Hou se. Fire Retardant Tests In Accordance With En 45545-2 Must Be Conducted By Either An Nabl-accredited Lab oratory For These Specific Tests Or A Testing Laboratory Accredited According To Iso/iec-17025 For The Perfor mance And Conduct Of Fire Tests In Compliance With En 45545-2. Proof Of Accreditation And Test Results For Al l Tests Conducted Must Be Submitted. (all Test Certificates Shall Be Submitted And Uploaded Together With Th e Bid For Evaluation Purposes). [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Caution Tape , Discharging Rod 33 Kv , Dust Mask , Ear Muff , Fighting Hose Pipe With Coupling , Florescent Jacket , rubber Hand Glove 11kv , Safety Belt Full Body Harness , safety Goggles , Welding Goggles , Welding Screen , whistle , Led Torch , Welder Gloves Or Gauntlets , Leather welding Apron , Welding Cap , Insulating Mats For Electrical purpose , Ladder , Traffic Safety Cone , Cotton Towel , Shot firing Cable , Retro-reflective Tape , Fire Blanket , Heat And cut Resistant Gloves , Folding Stretcher , Life Safety Jacket , first Aid Kit Box , First Aid Kit , Rubber Electric Gloves 6.6kv , Rubber Electric Gloves 550v , Anti-electric Safety Shoe , retro Reflective Sign Board , High Pressure Fire Fighting hose , 1.8 M High Mast Vehicle Flag , Shirt For Pit Safety committee , Pant For Pit Safety Committee , Shirt For blasting Crew , Pant For Blasting Crew , Aluminium Nozzle , rubber Hand Gloves 33 Kv

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3a 16879 With Available Items [refer Enclosure For The Material Composition].location-diesel Loco Shed/goc. Custodian- Sse/diesel Shed/goc.re-claimable Items - [1] Wheel Set Complete [axle, Wheel Disc, Bull Gear, Msu Tube, Axle Boxes With Bearings]- 6 Sets.s.1539 No.738158 Dt.29.11.2024. Note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot.special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property. [8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery, Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay. [12] The Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Diesel Loco Shed Goc)

Description: Descr.: Condemned And Unserviceable Bg Alco Loco No.wdm3d 14144 With Available Items Without Traction Motors [06 Nos] [refer Enclosure For The Material Composition].location-diesel Loco Shed/erode, Custodian-sse/dsl/ed.re-claimable Items [1] Wheel Set Complete [axle, Wheel Disc, Bull Gear, Rsp Tube, Axle Boxes With Bearings]-6 Sets. S.1539 No.636429 Dt.20.08.2024.note-[1] Delivery To Be Made On As Is Where Is And Lot Basis.[2]the Location Indicated Is Only Tentative. Railway Reserves The Right To Change The Location Of Sold Loco, Based On The Availability Of Track, Cutting And Loading Space And Other Administrative Reason, As Deemed Fit By The Auction Conducting Officer.[3]gas/chisel Cutting Is Permitted Only To Sizes That Are Loadable With A Crane, Only After Ensuring Sufficient Safety Measures Against Fire Hazards Etc. To Avoid Any Mishap To Any Person, Railway Material Etc. And The Same Should Be Ensured By The Witnessing Officials.[4]in Case Purchasers Require Usage Of Any Railway Assets/materials Such As Electricity/ Forklift Truck Etc. During The Process Of Delivery, They Are Required To Pay, The Prescribed Amount To Railways, As Directed By The Respective Custodian Of The Lot. Special Condition-[1] Reclaimable Item As Said Above In Description Of The Lot, Should Be Returned To The Custodian Before Commencing Delivery.[2] In Order To Make The Assessment, The Purchaser May Visit The Locos Offered For Condemnation And The Site Conditions Before Quoting The Offer.[3]the Purchaser Has To Make His Own Arrangements Such As Tools, Lifting Tackles, Lifting Equipment, Gas Cutting Equipment.[4]the Weight And Quantities Were Taken Into Consideration As Advised By The Custodian [5]the Purchaser May Note That Some Of The Reclaimable Items Of Locos Are To Be Stripped Instead Of Gas Cutting To Avoid Damage To Rc Items And The Purchaser Should Make Such Arrangements.[6]the Purchaser Is Strictly Instructed To Transport/stack All The Reclaimable Items At One Location Well Away From The Cut Off Parts Of The Locos As Directed By The Custodian. [7]the Purchaser Will Be Held Responsible For Any Damage/fire Accident Caused To The Railway Property.[8] Railway Is Not Responsible For Any Shortage.[9] After Completion Of Delivery Purchaser Has To Keep The Cutting And Loading Spot Neat And Clean, Free Of Any Left Over Loco Scrap.[10]railways Does Not Guarantee For Quality, Quantity Description Etc.[11] Delivery Should Commence Immediately After Cutting Without Any Delay.[12]the Courts In Chennai Alone Shall Have Exclusive Jurisdiction In The Matters/disputes Arising Out Of The Contract/arbitration/conciliation Proceedings And The Place Of Arbitration/conciliation, If Any, Shall Be In Chennai Only. [13] Bsv Partly Paid Along With Emd Will Be Forfeited, If Full Payment Is Not Received In Stipulated Time, With Interest If Any Applicable. [14] Part Delivery Is Not Permitted Against Part Payment. (location: Diesel Loco Shed Erode)

Details: Operation And Maintenance Works Of Dream Valley Phase 2 Project, Tech Zone Iv, Greater Noida (u.p) operation & Maintenance Of Civil , E & M Services (internal & External), Housekeeping, Security Services, horticulture/landscaping Works, Stp, Wtp, Rwh, swimming Pool, Fire Fighting & Fire Alarm, Substation, dg Set, Lifts, Hvac/mechanical Ventilation System, water Supply Pumps, Cctv System, Solar Power system, General Pest Control, Wtp,stp, Rwh, Building management System With Cctv Camera, Access control System, Boom Barrier System , Data Centre & allied Infrastructures , Along With Amc Of Mep equipments As Mentioned In Tender Documents At amrapali Dream Valley Phase-ii Project Which comprises Of Multistoried Residential Towers Containing 1 Bhk, 2 Bhk & 3 Bhk Dwelling Units And Nonresidential Buildings Containing Commercial, Social And services Infrastructures. There Are 47 Nos. Towers having 8302 Apartments In This Phase-ii With configuration Of 2b+p+g+18 & 2b+p+g+25 respectively With Elevators, Services And Three-layer basement/stilt For Parking.

Description: CATEGORY: PUF Panel 60mm for wall , PUF Panel 40mm for ceiling , Roof sheet 0 point 60 mm , Hollow Steel iron , Anlge Iron , Nut and bolt , 12 mm thick ply , 18 mm thick ply , 6mm thick vinyl sheet , Smart ortho Mattress Ultimate back pain relief , Earthing , Lightening Arrester , Main door , Window , Fire extinguisher Ball Auto Fire Off 1 point 30Kg , Sealing material tube , Sealing Gun , Rivet Pin Packet of 1000 , Self driving screw 4 inch full thread , Self driving screw 5 inch full thread , Curtain rod , Stainless Steel premium fesue dual edge 8 pin cloth hanger , Foot Scrapper , Iron Foot Mat , Looking Mirror , Fd heating device , Electric Items , Ordinary Portland Cement grade 43 , Coarse Sand. , Stone aggregate shall be crushed stone 20mm , Stone aggregate shall be crushed stone 40mm , Stainless Steel Shoe Rack Shoe Stand Multipurpose Stand , Swing Open Top Dust Bin Stainless Steel , Transitional End Table with Open Shelves size , Stainless Steel Heavy Duty Double Pole 3 layer Foldable and Moveable , Casing capping double locked box type , 18 watt decorative ultra slim square profile LED lighting , Switch piano flush type15 Amp, socket multi purpose 5 by 15 Amp , Switch piano flush type 5 Amp socket 3 pin 5 Amp , 20 Amp MCB box single pole , 16 Amp MCB box , 6 Amp MCB box , Bulk head fitting 60W , Exhaust fan with louver size 150 x 150mm , Change over switch double pole 03 Phase 100 Amps , PVC single core 2 point 5 Sqmm Roll of 90mtr , PVC single core 1 point 5 Sqmm Roll of 90mtr , Ceiling Rose three terminal with ISI mark 230V , Gang Box 2 switches 5 Amps heavy duty , Gang Box 1 Switch 5 Amps heavy duty , PVC square box with ISI mark , Screw 25mm 200 No , Screw 50mm 50 No , Tap Insulation Roll , Factory made sheet distribution board 12 way , Switch Piano flush type 5 Amp 230 Volt ISI mark , 16 Sqmm three core aluminium Armoured cable

Description: CATEGORY: TEST SIEVES 8 INCH NO BSS 44mesh with NABL test certificate , TEST SIEVES 8 INCH NO BSS 60 mesh WITH NABL test certificate , NITRIC ACID A.R. grade 2.5 ltr pack , Ashless flter paper no 40 125 mm dia 100 CIRCLES PER PACKET , PLASTIC CYLINDER GRADUATED SINGLE METRIC SCALE WITH POUR OUT WITH HEXAGONAL BASE CAP. 1000ML , Perchloric Acid AR grade min.70 percent Assay Packing 2.5 litre in Glass Bottle , SODIUM OXALATE AR grade , SIEVE TEST BRASS WITH FRAME 8Inch DIA MESH 150 with NABL certificate , AMMONIUM PERSULPHATE AR , HDPE BAGS WITH PLASTIC LINER SIZE 19 inch X 30 nchfor sample collection , xylenol orange indicator , Portable Hand held pH Meter pH100 Accuracy of plus minus 0.01 pH with temp indication , Silica sand for Fire Assay in Gold and Silver Analysis size less than 0.5mm purity greater than 95.0 percent with certificate , SS weight Class F1 ,1KG, with NABL callibration certificate , Sodium acetate trihydrate AR grade , Hydro Bromic acid AR grade