Drawer Tenders

Description: Cond.& U/s Diesel / Ac Loco/emu/c&w/ Lhb Components Such As Tooth Gears, Crank Shaft, Brake Disc, Pinion,injector, Gear Wheel, Cylinder Liners,grease Cup,alternator Fan Cover Filter Assembly, Cattle Guard, Sab Air Brake Components, End Shield, Air Brake Cylinder Components, Shock Absorber, Cattle Guard, Linear,traction Motor Spare Parts, Dust Collector, Motorman Driver Seat Base With Bend, Hp Cylinder Rail Guard, Outer/inner Sleeves Of Bearing Bolts& Nuts, Air Filter, Damper, Lube Oil Filter, Linear, Push Rod &gudgeon Pin, Compressor, Hood With Impeller,ocb Ducts, Labyrinth, End Frame Tamper, Hanger Link, Cylinder Linear, Oil Dispersive, Axle Box Cover, Servo Motor, Pantograph, Deflector For Hitachi Traction Motor, Protective Tube Collars, Alternator Cowl Of Various Sorts, Anchor Link, Flushing Valve, Hydraulic Nut,emu Scrap Including Fan Body, Striker Casting With Grease Adherings(diesel), Impeller, Guard, Compartment Sliding Doors, Compensating Ring, End Sheild ,cartridge With Nu Bearing,pipe, Drum,hoist, Gear, Impeller, Eot Crane Wheels, Eot Crane Gears , Semi Permanent Coupler, Bogie Mounted Brake Cylinder Of Ac Loco,traction Link With Bush, Emu After Cooler, Cr Tank,cbc Restrictor,centre Pivot Block Assembly With Rubber Bush, Draw And Buff Gear, Side Rod, Pull Rod, Pinion Wheel, Pull Lift Chain, Door Closer, Emu Coupler,inter Cooler, Engine Head, Covers, Dooms, Pipes, Tank, Front Cover, Rear Cover, Hand Rail, After Cooler, Cylinder Body, Spring Piston, Holder Plate,sand Box, Labyrinth,outer Bearing Covers, End Shield, Piston Trunk, Adjusting Rod, Palm Pull Rod, Control Arm, Dbr Rf Boxes,hoods, Brake Hanger, Brake Hanger With Head, Brake Head & Semi Permanent Coupler And Parts, Bmbc Components, Bend Cover, Inspection Cover, Centrifugal Dust Collector, Cut Off Angle Cock, Safety Rod, Racker Arm, Valve Plate, Cylinder Bore, Bearing Cover, Emu Sliding Door, Silencer, Racer, Raiser, Bellow Plate, Door Operating Cylinder Scrap, Msu Components Scrap, Labyrinth &pinion Shaft(diesel), Compensation Ring, Buff Gear, Hood With Impeller, Ront Fork Complete Housing, Lb Spring Set Scrap, Stator W/o Coil, Contering Dis, Anger Link With Or W/o Silent Block, Oil Cup And All Other Scraps Released From Diesel / Ac Loco/emu/c&w/lhb Components And All Other Ms/ci With/without Minor Non Ferrous Attachments In As Is Where Is Condition. Note: 1) Cutting Permitted To Heavy Nature Items Only. 2) During Delivery If Any Major Non Ferrous Items Found The Same Should Be Handed Over To Custodian. 3) Loading By Crane Is Also Permitted. Pl No.98050126. Custodian: Cdms-rsf-gsd-per. Location: A Row Bin 1 & 2.

Description: CATEGORY: Paper A4 size , Paper Legal size , JK Excel Bond Paper ACR 100 Gsm , Kodak 200 GSM ink Jet printing Glossy photo paper , Punching Machine Kangaro Manual A4 binding , Carbon Paper Good Quality , White Adhesive Fevicol 500gm , Cello Bule pen , Reynolds Pen Blue , Reynolds Pen Black , Stapler Big Hd 10 Kangaro , Stapler Pin Large Hd 10 Kangaro , Stapler Small Hd 10 Kangaro , Stapler Pin Small No 10 , Stamp Pad Big , Permanent Marker , Binding Punch Machine Two Hole , Pilot Pen V7 Blue , Pilot Pen V5 Blue , Pilot Pen V10 Blue , Pilot Pen V10 Red , Pilot Pen Refil V7 , Uniball roller ball pen Blue , Uniball roller ball pen Red , Uniball roller ball pen Black , Uniball roller ball pen Light Blue , Pilot Pen Blue , Transparent Tape 1 by 2inch by 50 Mtrs , Transparent Tape 1inch by 50 Mtrs , Transparent Tape 2 inch by 50 Mtrs , Tixo Tape Blue Red 2 inch by 50 Mtrs , Tixo Tape 1 by 2inch 30 Mtrs , Pencil Apsara , Pencil Sharpener 20 pcs , Eraser Non Dust Apsara 20 Pcs , Sketch Pen Black 12 Pcs , ENVELOPE 5 by 11 inch Laminated , I- Card Envlope with inner cloth , Envelope Med 10 inch by 12 inch Laminated , Envelope Large 16 by 12 Clothed , Envelope Med 14 inch by 10 inch Laminated , Scissor 80 Inch , Stick Pad Yellow 2 inch by 3 inch , Stick Pad Yellow 3 inch by 4 inch , White file with Arty Crest , White File Cover Plain , U Clip 35 Mm Plastic , Noting Appt Pad 11 by 17cm 100 Pgs , U Clip 35 Mm Steel , File Binder , Cutter Blade Steel , Text Highlighter 10 Nos All colour , Glue Stick 15 Gram , Talc Sheet Roll 400 Mtrs , Register Deluxe 2 Qr , Register Deluxe 3 Qr , Register Deluxe 4 Qr , Register Deluxe 5 Qr , Register Deluxe 6 Qr , Paper Pin , Binder Clip 15mm , Binder Clip 19mm , Binder Clip Medium Size , Binder Clip Large Size , Steel Scale 12 inch , Tag Original , Tag Green Large , White Board Marker Blue Black Red , All Colour Paper Size A4 , Part II Order Folder , Poker Wooden Handle , Calculater Big , Clipboard Omega Transparent , Correction Whitener Pen , Paper Cutter large Steel , DO Envelope , CD Marker pen , Sticky Flag Four Color , Rubber Stamp Ink Bottle , Drawing Sheet All Colour , File Cover Hard Printed All colour , Gun Tagger Large , Dump Pad water , Tape Despensor 1 by 5 , Gun Tagger Pin , Stick Note Five color Plastic Flag , Dak Folder , Paper weight

Details: Construction of Dehra Dam on Dehra Nala, tributary of Bina River having Minimum gross capacity of 72.36 MCM & Semraghat Weir on Dhasan River of Minimum capacity of 6.51 MCM on turnkey basis with maximum total submergence of 1034 Ha land, 4 MW Power House at Dehra Dam, Feeder channel with regulating structure from Dhasan river to Dehra nala comprising of detailed survey, preparation of Construction design, drawings and obtaining approval of all construction design, drawings from the competent authority including construction of all civil, mechanical, and electrical works involved in the construction of Dam, Weir & Power House. The work includes survey of Head Work, Power house, Feeder channel and Submergence with Fixing of Chainage cum Boundary Stone, geological investigations, hydrology approval, preparation, and submission of complete Land Acquisition (LA) cases to competent authority for land acquisition of dam seat, Feeder channel , Power house and submergence area and perusing LA cases for award, forest clearance, environmental clearance(if required), NHAI clearance, and all other clearances which are required for dam and weir construction. Construction of permanent two lane CC road for dam approach from SH or NH road, Concrete Overflow block, Non-over flow blocks including power block, Energy Dissipation arrangement, earthen dam including river training and construction of coffer dam, provision of environmental sluice and Radial gates with hoisting arrangements, Stop log arrangements, gantry crane with rails arrangement, RCC T beam Deck slab bridge with minimum 6.5 meter width and foot bridge etc. and hoist supporting structures with primer anti corrosive and painting necessary as per IS CODE for all component of steel structure involved in construction, including removal of defect for 60 months in defect liability period, model study of the project Construction, Planning & Design of control room, Guest House, staff room and chaukidar quarter Building with supply of generator and procurement, supply and erection of DG set with required capacity for operation of all gates with one stand by generator and maintenance of all components for five years after completion of the project, including dam break analysis, Emergency action plan(EAP) preparation, gate operation manual, instrumentation in dam for monitoring and any other work as directed by the Engineer-in-Charge as per details given in scope of work. The work also includes Watch and ward, Management, Operation and Maintenance (MOM) for the Period of 60 months for dams, weir including its all component and 120 months for power house including its all components.

Details: CATEGORY: General Servicing of 1.5 or 2.0 TR WAC or SAC units , SITC of 1.5 TR Resiprocating Type Compressor , SITC of 2 TR Resiprocating Type Compressor , SITC of 1.5 TR Rotary Type Compressor , Charging of Refrigerant Gas for 1.5 TR WAC or Split AC , Charging of Refrigerant Gas for 2.0 TR WAC or Split AC , Replacement and Reparing of Thermostate , Replacement and Reparing of Starting capacitor 80 to 100 or 120 mfd , Replacement and Reparing of Running capacitor 36 or 40 mfd , Replacement and Reparing of Relay for WAC or Split AC , Replacement and Reparing of Wiring kit for WAC unit , Replacement and Reparing of Selector Switch for WAC unit , Rewinding of Condensor or Blower Motor for AC unit incuding replacement of bush , Replacement and Reparing of Blower Fan Motor Capacitor 4 or 6 mfd , Repairing of PCB for WAC or Split Remote Control unit , Replacement of faulty or Irrepairable PCB for 1.5TR Split AC Unit , SITC of Blower fan motor for 1.5 or 2 TR window or split AC , Supplying, Installation of condensor or Blower fan blade , Top Up or Additional Charging of R-22 or 32 gas , Supplying and drawing of 3X2.5 sq. mm FRLS PVC copper single core cable , Supplying and drawing of 6X2.5 sq. mm FRLS PVC copper single core cable , Supplying and fixing of 20mm medium class PVC conduit , Supplying and fixing of 25mm medium class PVC conduit , Supplying and fixing DP sheet steel enclosure with 25 or 32amps 240 volts C curve DP MCB , Supplying and fixing of 5 A to 32 A rating, 240 or 415 V, 10 kA, C curve, SPN MCB , Supplying and fixing of 3X2.5 sq. mm PVC FRLS Round sheathed Multi Core Bright Annealed Bare Copper cable , Dismentalling of existing 1.5 or 2.0 TR Capacity Window or Split AC Units , Transportation of existing 1.5 or 2.0 TR Capacity Window or Split AC Units , ITC of 1.5 or 2.0 TR Capacity Split AC Units , Pdg and fixing of 1 by 4 inch dia copper refrigerant piping , Pdg and fixing of 5 by 8 inch dia copper refrigerant piping , Providing and fixing 12 mm thick particle board , Supplying and fixing suitable size MS Stand for split type AC outdoor unit

Details: Description:- Modification/alteration I N Existing E I (electronicinterlocking) A S P E R Latest Rdso guidelines/tan. It Includes: Design And Modification In Existing Interface And Interlocking Circuits And logic Of Ei System Including Modification In The Vdu(video Display Unit)/ Lcp(local Control Panel)/ Ccip (control Cum Indication Panel),maintenance Terminal (mpc), Data Logger, Relay Rack Wiring. The complete Work Should Comply With The Latest Rdso Specifications And Guidelines And As Per Approved sip And Circuit Diagrams. All The Material (interface Cards / Relays / Wiring Material / Connectors / Fuses / Communication Devices Etc.) Shall Be Provided By The Contractor. The Work Also Includes The Supply O modified Selection Table, Interface Circuits, Vdu/ Lcp/ccip Diagram Etc. To Suit The Modified Sip. It Also includesthecarrying O U T Of Fat , S A T ( A S Applicable) Jointly Withrailways A N D Satisfactory commissioning. All Plans/drawings/circuits Etc. Should Be Prepared On Auto Cad, Soft Copy To Be supplied On Pen Drive And 06 Sets Of Hard Copies Also To Be Supplied.

Details: Modification /alteration In Existing Ei (electronic Interlocking) As Per Latest Rdso Guidelines /tan. It Includes: Design And Modification In Existing Interface And Interlocking Circuits And logic Of Ei System Including Modification In The Vdu (video Display Unit)/ Lcp (local Control Panel)/ ccip (control Cum Indication Panel), Maintenance Terminal (mpc), Data Logger, Relay Rack Wiring. The complete Work Should Comply With The Latest Rdso Specifications And Guidelines And As Per Approved s I P A N D Circuit Diagrams. A L L The Material (interface Cards/re1ays/wiring Material/ Connectors /fuses/communication Devices Etc.) Shall Be Provided By The Contractor. The Work Also Includes The supply Of Modified Selection Table, Interface Circuits, Vdu/lcp/ccip Diagram Etc. To Suit The Modified sip. It Also Includes The Carrying Out Of Fat, Sat (as Applicable) Jointly With Railways And Satisfactory commissioning. All Plans/drawings /circuits Etc. Should Be Prepared On Autocad, Softcopy To Be supplied On Pen Drive And 06 Sets Of Hard Copies Also To Be Supplied.(alteration Involving Modification from 11 Up To 20 Routes. )

Details: Description:- Excavation Of Cable Trench As Per Cable Route Plan, 1.2 Mtr. Deep And Of 0.3 Mtr. To 0.6 Mtr. Wide At bottom As Per Rdso Sketch No. Sdo/cable Laying/003, Issued Vide Rdso Document No. Rdso/si/g/2010 Version 1.1 dated 04.02.2014 Or Latest, Alongside The Track In Normal Soil/strata (including Soft Rock), Conforming To Distances As Per cable Route Plan And Refilling And Ramming Of Loose Soil. This Work Includes Clearing Of Route From Bushes Etc, Covering of Cable Laid In Trench By Loose Soil For A Layer Of 50mm Thickness Approximately Before Covering By Bricks. (bricks To Be laid As Per Existing Norms Of Irsem And Ncr/hq). The Work Shall Be Done As Per The Extant Practice On North Central railwayandinstructionsofrailwayengineeratsite.incasethefulldepthisnotavailable,thereshallbeno proportionate Payment And After The Approval Of Minimum Jag Officer, The Concreting Shall Be Done As Per The Rdso drawing No.sdo/cable Laying/008, Issued Vide Rdso Document No. Rdso/si/g/2010 Version 1.1 Dated 04.02.2014 Or latest. Insp. By-consignee

Details: Auction Sale Of Immovable Property - Schedule A Property: All That Piece And Parcel Of Vacant House Site Bearing Plot No.39, Measuring An Extent Of 2600 Sq. Ft., Comprised In Old Survey No 653/1 As Per Old Patta No. 15666, New Patta No.32382, New S. No. 653/11, In The Layout Named "sai Baba Nagar" Situated At Pallikaranai Village, Sholinganallur Taluk, Kancheepuram District Now Chennai District. Measuring On The-north By: 40 Feet, South By: 40 Feet, East By: 65 Feet, West By: 65 Feet. Within The Registration District Of Chennai South And Sro Of Saidapet Joint. schedule B Property: 55% I.e. 1,430 Sq. Ft., Undivided Share Of Land From Out Of Schedule-a Property. schedule C Property: 435 Sq. Ft., Undivided Share Of Land (out Of Schedule "a" Mentioned Property) Residential/double Bedroom Apartment Admeasuring Approximately 1086 Sq. Ft., Inclusive Of Share In The Common Areas Of The Building To Be Known As "sudharshan Sayee" Delineated In The Drawing In Third Floor, Flat No. T-1 And One Covered Car Parking.

Details: Manufacture And Supply Of 10125 Mm Curved Switches With Zu-1 -60 /60e1a1 Thick Web Tongue Rail For 1 In 12 Turnout Bg(1673 Mm) For 60kg (uic)/60e1 On Psc Sleepers To Rdso Drg No. T- 6155(alt-10) Or Latest Alteration/modification If Any Up To The Date Of Tender Closing With Supplier's Rails, Compl Ete Set With All Parts And Fittings, Bolts & Nuts, Plate Screws, Cast Steel/ Mild Steel Plates And Nylon Cord Reinforced Grsp Etc. As Listed In The Drawing T-6155 Alt-10 Or Latest And Excluding Standard Fish Plates, Fish Bolts And Nuts, Elastic Rail Clips, Insulating Liners/metal Liner And Sleepers. (specification: Irs -t - 10-20 23 & T -62 -2022, Str: Tdg 0038, Rev.'0' Or Latest) Note: - The Responsibility To Procure Rails Will Solely Lie With The Manufacturer (bid Including Rail Cost/per S Et) In Terms Of Railway Board Letter No. 2022/track-i(p)/fabricators Dt. 24.01.2022. [ Warranty Period: 30 Months After The Date Of Delivery ]

Details: Description :supply & Installation Of Aerosol Fire Suppression System Cartridge 100 Gm + 100 Gm, Total 2 pieces. As Per Technical Requirement Specified In Annexure - G1 Of Rdso Specn. Rdso/pe/spec/ac/0192-20 18 (rev-1) And Rdso Letter No. El/7.1.108/mssbc Dt. 17.09.2021. This Shall Be Installed In The Switch Boar d Cabinet Of Various Types Of Lhb Ac Coaches. All Necessary Modification, Clamping Arrangement And Acce ssories Required For Installation Of This Item Shall Be With The Scope Of The Supplier. Note :- Location Of Aeros ol Fire Cartridge In The Sbcs Shall Be As Per Drawing Mentioned In The Rdso Letter No. El/7 1.108/sbc/main dt. 07.01.2022. Make: Firepro/stat-x/pyrogen Technology Pvt. Ltd.(australia)/ Yg Yangin Guvenligi San. V e Dis. Tic. Ltd. Sti. (with Brand Name Hafex)/ Dspa Or Any Other Rdso Approved Make. [ Warranty Peri od: 30 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitted: max 8 Lacs ] ]