Drawer Tenders

Details: Integerated Wtcc., As Per Drawing: Lg10344 Alt.'a', Packing Instruction: 1. The Sup Plier Shall Pack The Integrated Wtcc In A Suitably Designed Returnable Fixture In Such A Way That Integrated Wtcc Shall Not Get Scratched, Damaged, Twisted During Transpo Rtation, Storage And Lifting And To Avoid Scratches On Outer Surface. It Should Be Wr Apped With Enviroment Friendly Material And It Should Have Standard Clamping /fasteni Ng Mechanism So That It Can Be Opened Easily. It Should Have Firm's Identification Mark. 2. First Returanable Fixture Along With Integrated Wtcc Be Retained By Rcf & This Fixture Shall Be Exchanged In The Second Lot Supply And So On. At The End Of The Conta Ct, The Firm Shall Collect The Remaining Returnable Packing Fixture From Rcf. 3. The Pac King Fixture/frame To Be Fabricated Having Sufficient Strenght To Bear Approximate 1 T Onne Load In Static & Moving Condition Of Two Coach Set Of Integrated Wtcc. 4. The Fixt Ure /frame/pallet Should Be Designed So That The Packed Wtcc Remain Preferably In Hor Izontal Position To Minimize Surface Area. 5. It Should Also Be Suitable For Storage Of I Ntegrated Wtcc Under Open Sky. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Rate Contract For Manufacturing & Supply Of 1in12 Bg 60kg Weldable Cms Crossing (wc ms Crossing) On Psc Sleepers In Accordance With Rdso's Standard Drawing No. T 8781,alt.1 As Per Irs specifications T - 29 (revised-2023) And Irs : T - 10 With Latest Alterations As Amended Up To Date Incl uding Supply Of A Set Of 6mm Thick Nylon Cord Reinforced Grooved Sole Plate (grsp) As Per Irs Specific ations T-55 Amended Up To Date Required Beneath Wcms Crossing (one Set Consists Of Total 75 Nos. Of nylon Cord Reinforced Grsp I.e. One No. Of Rdso Drg. No. T-7014/1, T-7014/2, T-7014 To T-7021, T-889 1, T-8892, T 8890, 46 Nos. Of Rdso Drg. No. T-8886 And 16 Nos. Of Rdso Drg. No. T-8888) Excluding e.r. Clips, Insulating Liners Etc. 60 Kg (uic)/ 60 E 1 Rails Required For Manufacturing Of Wcsm Crossing will Be Arranged By The Supplier At Their Own Cost [ Warranty Period: 30 Months After The Date Of Del ivery ] ]

Details: Notice Inviting E-tender Punjab & Sind Bank, Guwahati Zonal Office Invites E- Tenders Under 2 Bids System I.e. Technical Bid & Financial Bid, From Reputed, Bona Fide And Intending Contractors In The Prescribed Format For Proposed Interior Furnishing, Electrical, Lan Cabling & Ac Works Of Its Proposed New Premises At Moranhat, Charaideo, Assam The Tender Is To Be Submitted Only By Eligible Furnisher Through Online Mode Only. Tender Documents, Technical Specification, Drawing, Bill Of Quantities Uploaded On Specific Interface Which Will Be On The Bank’s E-procurement Site. Furnisher May View The Tender Notice On Bank’s Website Https://punjabandsindbank.co.in And Download & Upload The Same From/on Bank’s E-procure Website Https://psb.eproc.in The Tender Should Be Uploaded On The Above Website Up To 03.03.2025 By 03.00pm. Technical Bid Will Be Opened On 03.03.2025 At 3.30pm. As Mentioned In The Tender Documents. The Bank Reserves Right To Cancel Any Or All Tenders And Stop The Process At Any Point Of Time Without Assigning Any Reason Or Notice Whatsoever. For Any Further Clarification/query Contact-+91-7896536440 During Office Hours From 10.00 Am To 5.00 Pm Over Phone Or In Person. Zonal Manager Click Here

Details: Description:- Modification/alterationinexistingei(electronicinterlocking)asperlatestrdso guidelines/tan. It Includes: Design And Modification In Existing Interface And Interlocking Circuits And logic Of Ei System Including Modification In The Vdu(video Display Unit)/ Lcp(local Control Panel)/ ccip (control Cum Indication Panel), Maintenance Terminal (mpc), Data Logger, Relay Rack Wiring. The complete Work Should Comply With The Latest Rdso Specifications And Guidelines And As Per Approved sip And Circuit Diagrams. All The Material (interface Cards / Relays / Wiring Material / Connectors / Fuses / Communication Devices Etc.) Shall Be Provided By The Contractor. The Work Also Includes The Supply of Modified Selection Table, Interface Circuits, Vdu/ Lcp/ccip Diagram Etc. To Suit The Modified Sip. It also Includes The Carrying Out Of Fat, Sat (as Applicable) Jointly With Railways And Satisfactory commissioning. All Plans/drawings/circuits Etc. Should Be Prepared On Auto Cad, Soft Copy To Be supplied On Pen Drive And 06 Sets Of Hard Copies Also To Be Supplied. (existing E.i Installation At Vapi station Is M/s. Kyosan Make Distributed Architecture. Contractor Need To Submit List Of Material And activityrequiredtoexecutethisalterationalongwithqty/unit/rate.)alterationinvolving modification In Up To 10 Routes. As Per Attached Sip

Details: Aluminium Composite Panel, Size 3x1350x1850mm, Colour Shade As Per Ral 09 0 9005, As Per Drawing: Icf/md/spec-234, Issue Status-01, Rev.03 With Amd-01, Packing Instructio N: 1. During Stacking Of Laminated Sheets Like Lp, Hpl, Naftc And Pre-laminated Compreg, One Over The Other, Brown Paper Should Be Provided Between Adjacent Layers (finish Si De Only) To Avoid Scratches. 2. Sheets (upto 6mm Thickness) Should Be Packed In Wooden Cage Inmultiple Of 10 Sheets (overall Weight Of Each Cage Should Not Exceed 350 Kgs.), Made From Wooden Strips Of 20x100mm Of Suitable Length. Gap Between Each Wooden St Rip Should Not Be More Than 200mm. All Around The Top And Bottom Cage, Packing Steel Strip Should Be Provided At Four Places. 3. The Supplier Has To Ensure The Safe Transit And Delivery Ofmaterial Upto Consignee By Adopting Suitable Packing Mode Of Transpor T And Handling, Preferably By Side Opened Trailer Trucks. Transit Damage, If Any, Shall B E At The Cost Of The Supplier. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Notice Inviting E-tender Punjab & Sind Bank, Guwahati Zonal Office Invites E- Tenders Under 2 Bids System I.e. Technical Bid & Financial Bid, From Reputed, Bona Fide And Intending Contractors In The Prescribed Format For Proposed Interior Furnishing, Electrical, Lan Cabling, Ac Works, Cctv, Fire Alarm & Civil Work For Interior Renovation & Re-furnishing Of Model Branch At R.g.barua Road, Chandmari, Guwahati, Assam. The Tender Is To Be Submitted Only By Eligible Furnisher Through Online Mode Only. Tender Documents, Technical Specification, Drawing, Bill Of Quantities Uploaded On Specific Interface Which Will Be On The Bank’s E-procurement Site. Furnisher May View The Tender Notice On Bank’s Website Https://punjabandsindbank.co.in And Download & Upload The Same From/on Bank’s E-procure Website Https://psb.eproc.in The Tender Should Be Uploaded On The Above Website Up To 17.02.2025 By 03.00pm. Technical Bid Will Be Opened On 17.02.2025 At 3.30pm. As Mentioned In The Tender Documents. The Bank Reserves Right To Cancel Any Or All Tenders And Stop The Process At Any Point Of Time Without Assigning Any Reason Or Notice Whatsoever. For Any Further Clarification/query Contact-+91-7896536440 During Office Hours From 10.00 Am To 5.00 Pm Over Phone Or In Person. Zonal Manager Click Here

Details: Description :supply Of Automatic Change Over Control And Distribution Panels For Cls As Per Latest Rdso specificationno.ti/spc/psi/cls/0020 With A&c Slip 1 To 4. Core Approved Drawing No.:ascos/core/2005/0 1 Rev.02 Or Latest.the Interior Of Cls Panel Shall Be Adequately Lighted By 60 Watt, 240 V Ac Lamp With A D oor Operated Switch. The Wiring Shall Be Capable To On/off The Lamp Through Door Operated Switch If Any O ne Power Supply Is Available On The Panel. The Supporting Frame And Panel Shall Be Properly Treated And Th en Under Coated Suitably To Serve As Base And Binder For The Finishing Coat Applied. The Exterior & Interior S urface And The Supporting Frame Of The Panel Shall Be Epoxy Powder Coated Of Vellum Colour In A Shade No . 365 Of Is:5. If Any Painting Surface Gets Damaged During Transit, The Surface Finish Shall Be Restored At Site after Erection. (1) 150 Amp. Capacity 240 Volts, 3 Supply, 50 Hz. For 25 Kva At(make: Isi Approved) [ Warr anty Period: 30 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitted: max 8 Lacs ] ]

Details: Description:- "metal Beam Crash Barrier Double W Single Side :providing And Erecting "w" Metal beam 02 Nos Barrier Comprising Of 2mm Thick Corrugated Sheet Metal Beam Rail On 1.50 M High channel Post (150 X 75 X 4mm)above Ground Level And 1.20m Below Ground Level, Spaced At 2m centre To Centre, All Steel Parts, All Fittings And Fitments To Be Galvanized By Hot Dip Processcon Firm to Is 4759, Metal Beam To Be Fixed On The Vertical Post Complete. Work Will Be Carried Out As Per The railway Approved Drawing And As Per Specification And Special Condition Of Contract.the Post Should be Placed Below Gl By Driven Mechanism Or Auger Mechanism As Directed By Engineer In Charge As per The Site Conditions. The Concrete And Shuttering As And When Require Will Be Paid Under The relevant Items. Note : The Item Rate Includes With Materials, Labour, Lead, Lift, Loading, Unloading, tools And Plants All Taxes, Site Cleaning,bush Cutting, Preparation Of Approach Path, Manual Carting Of materialsduetounavoidablesiterequirementetc.,withcontractor'sownmaterialandlabour neccessaryfordoingalltheworksinvolvedinconsturcutingthemetalbeamrailingbarrier completein Place In All Respects As Per The Specifications. Work Will Be Carried Out As Per Direction and Instruction Of Engineer In Charge Of Work /engineer's Representative (no Any Extra Payment Shall be Paid By Railway)"

Details: Construction Of Rcc Ghat (a) Construction Of Ghat Between old Bridge And Gau-mukh Ghat At Omkareshwar, Tehsil- Punasa, Districtkhandwa Minimum Area 600 Sqm. (b) Construction Of Ghat Between Old bridge And Nagar Ghat At Omkareshwar, Tehsil- Punasa, District- Khandwa minimum Area 10850 Sqm. (c) Construction Of Ghat Between Naveen Ghat and Abhay Ghat At Omkareshwar, Tehsil- Punasa, District- Khandwa minimum Area 8350 Sqm. (d) Construction Of Ghat At Sangam Of Narmada and Kaveri River At Omkareshwar, Tehsil- Punasa, District- Khandwa minimum Area 18350 Sqm. Including Detailed Survey, Investigations, Design, drawing With Expert Suggestions For All Essential Protection Works Such As construction Of Retaining Wall, Providing & Fixing Anchorage Arrangements, safety Railings, Slope Protection, Guide Walls, Providing And Errection Of High mast, Making Arrangements Of Foundation & Inauguration Ceremony, constructions Of Murals Including Aesthetic View, Complete Painting Work Of ghat, Construction & Redevelopment Including Widening Of Existing Approach road & Existing Stair Case From Main Road To Ghat, Supplying And Fixing Of All miscellaneous Work And As Directed By Engineer-in-charge Requires To complete Entire Work In 11 Months Including Rainy Season, Works Includes The maintenance Of Ghat For 3 Years After Completion Of Work With 3 Years Defect liability Period Both Are Running Simultaneously.

Details: SET OF SEATS & BERTHS FOR LHB GS COACHES. FOLLOW CUSHIONING MATERIAL PU F OAM TO RDSO SPEC. RDSO/2007/CG-04 REV.-01 AND UPHOLSTERY TO RDSO SPEC.RDSO/2008/CG-07 REV.-01 WITHOUT FIRE BARRIER. FOLLOW COLOUR SHADE ALNAC-03 FOR UPHOLSTERY. FOR PAINTIN G OF THE VISIBLE METALLIC PORTIONS OF SEATS & BERTHS COLOUR SHADE RAL-9006 TO BE FOLLO WED., as per Drawing: MPLSEATGS VERSION 0, Packing Instruction: ALL PROTRUDING PORTIONS OF S EAT/BERTH SHOULD BE PROTECTED WITH ENVIRONMENT FRIENDLY PRE MOULDED THERMOCOL CAP OF REQUISITE STRENGTH OR SILICON RUBBER CAP AS AN ALTERNATE OPTION. EACH INDIVIDUAL SEA T/BERTH SHOULD BE COVERED WITH BIODEGRADABLE BUBBLE SHEET OF DIAMETER 10MM AND THIC KNESS 30 MICRON ALL ROUND. FLAP OF BERTH SHOULD BE OUTSIDE THE BUBBLE SHEET PACKING LE AVING SEAT & BERTH MOUNTING UNCOVERED. THEN IT SHOULD BE WRAPPED ALL ROUND IN THICK L AMINATED JUTE FABRIC OF SUFFICIENT STRENGTH. THE ASSEMBLY SHOULD BE TIED WITH NYLON STR IPS. IT IS FURTHER WRAPPED WITH BIODEGRADABLE POLYTHENE ALL ROUND TO PREVENT INGRESS O F DUST/WATER. FOR THE FOLLOWING ITEMS (IF COVERED UNDER S&B SET) THE ITEM-WISE PI (LATEST VER.) WILL B