Drawer Tenders

Details: Notice Inviting E-tender Punjab & Sind Bank, Guwahati Zonal Office Invites E- Tenders Under 2 Bids System I.e. Technical Bid & Financial Bid, From Reputed, Bona Fide And Intending Contractors In The Prescribed Format For Proposed Interior Furnishing, Electrical, Lan Cabling, Ac Works, Cctv, Fire Alarm & Civil Work For Interior Renovation & Re-furnishing Of Model Branch At R.g.barua Road, Chandmari, Guwahati, Assam. The Tender Is To Be Submitted Only By Eligible Furnisher Through Online Mode Only. Tender Documents, Technical Specification, Drawing, Bill Of Quantities Uploaded On Specific Interface Which Will Be On The Bank’s E-procurement Site. Furnisher May View The Tender Notice On Bank’s Website Https://punjabandsindbank.co.in And Download & Upload The Same From/on Bank’s E-procure Website Https://psb.eproc.in The Tender Should Be Uploaded On The Above Website Up To 17.02.2025 By 03.00pm. Technical Bid Will Be Opened On 17.02.2025 At 3.30pm. As Mentioned In The Tender Documents. The Bank Reserves Right To Cancel Any Or All Tenders And Stop The Process At Any Point Of Time Without Assigning Any Reason Or Notice Whatsoever. For Any Further Clarification/query Contact-+91-7896536440 During Office Hours From 10.00 Am To 5.00 Pm Over Phone Or In Person. Zonal Manager Click Here

Description: 829921690010 srph346350-vacutainer Needle With Visibility Of Blood Entry 21g For Multi-sample Colle ction Should Have The Following Specifications: 1). The Designing Of The Needles Should Be Such Th at It Can Able To Minimize The Pre- Analytical Variability Throughout The Specimen Collection And H andling Process To Ensure Reliable Results And Should Be Suitable For Faster Procedures. 2). The needles Should Be Suitable For Closed- System Blood Collection I.e Drawing Blood Directly From T he Vein Into Vacuum Collection Tubes To Prevent Exposure Of Atmosphere. 3). The Needles Should B e Suitable For Multi- Sample Collection.4). Needles Should Be Sterile, Double-ended With A Sleeve C overed Safety Valve For Use With Vacutainer Tube Holder And Vacuum Blood Collection Tubes. 5). S ize Of The Needle Should Be 21g X 1 Inch (gauge: 21g, Length: 1 Inch./25 Mm).6) Needle Design Should provide Instant Confirmation Of Needle Placement, Through Visual Flashback Indication.7). There S hould Be A Chamber Or Similar Arrangement At The Needle Junction For Easy Visual Confirmation Of blood Flow Entry.8). Needle Should Have Low-angle Bevel Design And Should Be Coated With Silico ne/ Similar Low Friction Lubricant Coating To Ensure Gentle And Smooth Vein Entry (for Smooth Pai nless Pricking To The Patients 9). The Firm Should Provide Certificate Of Compliance Report For Eve ry Batch And Material Used For Making The Needle And Sterilization Of The Needle Should Comply W ith Iso Standards.10). The Product Should Be Bis/iso/ce/us Fda Certified And Should Produce The Ce rtificate While Quoting In The Tender.11). The Firm Should Supply Suitable Needle Holders Along Wit h The Needle Supply And Also Should Submit Adequate Sampling Material For Checking Suitability & for Validation, Verification Of Productunit:no ] consignee Acms/drug Stores/rh/pgt, Sr Kerala 1000.00 Numbers

Description: 829921690010 srph346350-vacutainer Needle With Visibility Of Blood Entry 21g For Multi-sample Colle ction Should Have The Following Specifications: 1). The Designing Of The Needles Should Be Such Th at It Can Able To Minimize The Pre- Analytical Variability Throughout The Specimen Collection And H andling Process To Ensure Reliable Results And Should Be Suitable For Faster Procedures. 2). The needles Should Be Suitable For Closed- System Blood Collection I.e Drawing Blood Directly From T he Vein Into Vacuum Collection Tubes To Prevent Exposure Of Atmosphere. 3). The Needles Should B e Suitable For Multi- Sample Collection.4). Needles Should Be Sterile, Double-ended With A Sleeve C overed Safety Valve For Use With Vacutainer Tube Holder And Vacuum Blood Collection Tubes. 5). S ize Of The Needle Should Be 21g X 1 Inch (gauge: 21g, Length: 1 Inch./25 Mm).6) Needle Design Should provide Instant Confirmation Of Needle Placement, Through Visual Flashback Indication.7). There S hould Be A Chamber Or Similar Arrangement At The Needle Junction For Easy Visual Confirmation Of blood Flow Entry.8). Needle Should Have Low-angle Bevel Design And Should Be Coated With Silico ne/ Similar Low Friction Lubricant Coating To Ensure Gentle And Smooth Vein Entry (for Smooth Pai nless Pricking To The Patients 9). The Firm Should Provide Certificate Of Compliance Report For Eve ry Batch And Material Used For Making The Needle And Sterilization Of The Needle Should Comply W ith Iso Standards.10). The Product Should Be Bis/iso/ce/us Fda Certified And Should Produce The Ce rtificate While Quoting In The Tender.11). The Firm Should Supply Suitable Needle Holders Along Wit h The Needle Supply And Also Should Submit Adequate Sampling Material For Checking Suitability & for Validation, Verification Of Productunit:no ] consignee Acms/drug Stores/rh/pgt, Sr Kerala 1000.00 Numbers

Description: CATEGORY: Dr fixit pidilite URP in 01 Ltr packing , Dr fixit 01L silicon , Dual directional reflective speed raising breaker 3 Meter long 03 Black 03 Yellow breakers with installation with raising , GI Wooden Screw 15 mm 200 Nos in Pkt , GI Wooden Screw 20 mm 200 Nos in Pkt , GI Wooden Screw 25 mm 200 Nos in Pkt , GI Wooden Screw 30mm 200 Nos in Pkt , GI Wooden Screw 35 mm 200 Nos in Pkt , GI Wooden Screw 50 mm 200 Nos in Pkt , Liquid Rubber solutionfor water prooofing with reinforcement fabric , Paint enamel in one ltr packing AF Blue , Plain glass 3ft x 6ft 3mm thick , PVC Bend pipe for Low level cistern 32mm , PVC internal fitting kit for low level cictern complete , PVC lid for OHT Cap 500 Ltr , Steel screw 13 to 6 pack of 500 pcs , Steel screw 19 to 6 pack of 500 pcs , Steel screw 19 to 8 pack of 500 pcs , Steel screw 25 to 6 pack of 500 pcs , Steel screw 32 to 8 pack of 500 pcs , Solar SPARKLE cat eye of aluminium pressure die casted body of size 115 x 100 x 22 mm as per required , Thread cotton , White cement grout , Window glass sheet 3mm thick 4ft x3ft plain , Capacitor 2.5 MFD , Empire tape 20mm , High pressure cut off switch for AC , HT insulation tape 20mm , Insulation tape 20mm x 25mtr , Insulation tape 25mm x 25mtr , MCB TPN 100 Amp , PVC Casting caping round size 19 or 20mm double lock , Step fan regulator 2 module , Aluminium thimble of size 35Sqmm DOWELLS or BARCO or JAINSON LUGS or COMET LUGS , Aluminium thimble of size 95Sqmm DOWELLS or BARCO or JAINSON LUGS or COMET LUGS , Aluminium thimble of size 70Sqmm DOWELLS or BARCO or JAINSON LUGS or COMET LUGS , Aluminium thimble of size 240Sqmm DOWELLS or BARCO or JAINSON LUGS or COMET LUGS , Aluminium thimble of size 400Sqmm DOWELLS or BARCO or JAINSON LUGS or COMET LUGS , Sheet Metal Enclosure with provision of MCCB 200 or 250 Amps 4 pole as incomer and MCB SP and TP out going , Cupboard wooden knobs in carved design , Cusioned seat and back set with ply and latherite tapestry cloth for revolving chair executive trade pattern , Favicol SH , Glue synthetic or rubber adhesive pidilite SR 505 , Paint enamal black Apcolite premium satin from Aianpaints , Paint enamal smoke grey Apcolite premium satin from Aianpaints , red oxide primer in one ltr packing , Stanless Steel counsil handle one side for shutters. 100mm in rose gold finish , Stainless Steel hydraulic hingers 0 deg crank 4 holes for soft closing of cabinet doors , Sand paper multignt 60 to 220 , SS304 T beading 10 mm rose gold finish , Botton mount soft closing telescope channels for drawers size 10 inch in powder coated finish or Zn plating , Thinner in one ltr packing , Touch wood for polish , Turpentine Oil , Wood adhesive for PVC edge banding FEVICOL probond Edgelock in tubes of 140g , HT Heat shrinkable jointing kit outdoor 70 to 120 sqmm , HT Heat shrinkable jointing kit indoor 70 to 120 sqmm

Description: Schedule Above Referred To:property No.1 First Schedule (description Of Land)all That The Piece Or Parcel Of Revenue Redeemed Land, Hereditaments And Premises Whereon Or Part Whereof The Said Building Is Standing Admeasuring 3 Collahs 11 Chittacks And 35 Sq. Ft., A Bit More Or Less Lying And Situate At The Municipal Premises No. 53, Dr. Meghnad Saha Sarani (formerly Named As Southern Avenue), Kolkata 700 029, Comprised In Holding No. 58, Sub-division "p", Division Vii, Dihi Panchannagram, Police Station-tollygunge, Now P.s- Lake, Kolkata Municipal Corporation Ward No. 87, District Registration Office At Alipore, District 24 Parganas (south) Butted And Bounded In The Manner As Follows:north: By The Premises No. 538. Dr. Meghnad Saha Sarani,south: By The K.m.c. Road Named As Dr. Meghnad Saha Sarani (formerly Named As Southem Avenue), East. By The Premises No. 53/1. Dr. Meghnad Saha Sarani West: By 40 Feet Wide K.m.c. Road Named As Lake Place Second Schedule (description Of Mortgage Flat)all That The Southern Side Of The Second Floor Flat Of The Building Admeasuring Super Built Up Area Of 1398 Sq. Ft., A Bit More Or Less Consisting Of Two Bedrooms, One Drawing Cum Dining Space, One Box Room, Two Baths With Privies With Modern Fittings, Two Verandahs Projected On Two Roads Lying And Situate At The Municipal Premises No. 53, Dr. Meghnad Saha Sarani (formerly Named As Southern Avenue), Kolkata 700 029, P.s. Tollygunge, Now P.s. Lake, Together With The Undivided Proportionate Share And/or Interest In The Land Comprised In The Said Premises Attributable To The Said Flat/unit And In The Common Areas, Facilities, Amenities And Installations In The Said Building. This Property Is In The Name Of Avik Kanti Paul Vide Registered Deed No. 369 Of 2010property No.2first Schedule (description Of Land) All That The Piece Or Parcel Of Revenue Redeemed Land, Hereditaments And Premises Whereon Or Part Whereof The Said Building Is Standing Admeasuring 3 Collahs 11 Chittacks And 35 Sq. Ft., A Bit More Or Less Lying And Situate At The Municipal Premises No. 53, Dr. Meghnad Saha Sarani (formerly Named As Southern Avenue), Kolkata 700 029, Comprised In Holding No. 58, Sub-division "p", Division Vii, Dihi Panchannagram, Police Station Tollygunge, Now P.s.- Lake, Kolkata Municipal Corporation Ward No. 87, District Registration Office At Alipore, District 24 Parganas (south) Butted And Bounded In The Manner As Follows:north: By The Premises No. 53b. Dr. Meghnad Saha Sarani,south: By The Km.c. Road Named As Dr. Meghnad Saha Sarani (formerly Named As Southern Avenue);east. By The Premises No. 53/1. Dr. Meghnad Saha Sarani West: By 40 Feet Wide K.m.c. Road Named As Lake Placesecond Schedule (description Of Mortgage Flat)all That The Northem Side Of The Second Floor Flat Of The Said Building Admeasuring Super Built Up Area Of 500 Sq. Ft., A Bit More Or Less Consisting Of One Bedroom, One Bath With Privy With Modern Fittings, A Small Terrace In The North, One Verandah Projected On One Road Together With One Covered Car Parking Space On The Ground Floor Of The Said Building Admeasuring 120 Sq. Ft., A Bit More Or Less Lying And Situate At The Municipal Premises No. 53, Dr. Meghnad Saha Sarani, (formerly Named As Southern Avenue), Kolkata 700 029, P.s. Tollygunge, Now P.s.- Lake, Together With The Undivided Proportionate Share And/or Interest In The Land Comprised In The Said Premises Attributable To The Said Flat/unit And In The Common Areas, Facilities, Amenities And Installations In The Said Building.

Description: CATEGORY: TA No 4 1 1 Side Light starboard 112 5 deg Green 80W code 6463133361HL 1 , TA No 4 1 2 Side Light Port 112 5 Red 80W CODE 6463133363HL 2 , TA No 4 1 3 Masthead White Light 360 deg 80 W CODE 6463134261 HL 3 , TA No 4 1 4 Stern White light 135 Deg to Aft 40W CODE 6463132261HL 4 , TA No 4 1 5 All round fixed white light 360 deg 25W CODE 6463131260HL 5 , TA No 4 1 6 All round fixed blue light 360 deg 60W CODE 6463131268HL 6 , TA No 4 1 7 Jack staff light 7 deg Aft blue 25W CODE 6463175222HL 7 , TA No 4 1 8 All round fixed white light 360 deg 80W the morse code CODE 6463131361HL 8 , TA No 4 1 9 All round suspended Green light 360 deg 80W suspended type CODE 6463131862HL-9 , TA No 4 1 10 All round suspended red light 360 deg red 80W Suspended type CODE 6463131863HL 10 , TA No 4 1 11 All round suspended Yellow light 360 deg Yellow 80W suspended type CODE 6463131864HL11 , TA No 4 1 12 All round suspended White light 360 deg 25W suspended type CODE 6463131961HL 12 , TA No 4 1 13 All round suspended Red light 360 deg 80W Suspended type CODE 6463131963HL 13 , TA No 4 1 14 Wake White light 7 t 10 deg to Aft 25W CODE 6463174521HL 14 , TA No 4 1 15 Flagship White light 225 deg to Aft 25W CODE 6463175622HL 15 , TA No 4 1 16 All round fixed Red light 360 deg 80W the morse code CODE 6463131363HL 16 , TA No 4 1 17 Towing Yellow light 135 to Aft 80W CODE 6463132261HL 17 , TA No 4 1 18 Blinker White light 225 to Aft 25 W CODE 6463134561HL 18 , TA No 4 1 19 Blinker Red light 360 to Aft 25 W CODE 6463134563HL 19 , TA No 4 1 20 Junction Box for blinker Light IP 56 or higher refer annexure 3 CODE 6461730088 AX , TA No 4 1 21 25W Incandecent lamp with screw E27 27with incisions C220-25-1H CODE 3466262122 , TA No 4 1 22 40W Incandecent lamp with screw E27 27with incisions C220-40-1H CODE 3466262123 , TA No 4 1 23 60W Incandecent lamp with screw E27 27with incisions C220-60- 1H CODE 3466262124 , TA No 4 1 24 80W Incandecent lamp with screw E27 27with incisions C220-80-2H CODE 3466000001 , TA No 5 12 Drawings and Documentation , Additional items if any not indicated in the above stated scope of supply

Details: Minimess Coupling G 0.25 inch BSP X M16 X 2 , Seal Kit for Boom Luffing Hydraulic Cylinder, circuit no- HS 64.3-A3525- 3-0 , Oil Level Indicator RMS 522 for hydraulic system of operating cabin circuit Drg. No-HS 64.3-A3527-3-0 , Pr. Relief Valve DBW 10 B2-5X 315 6E G24 N9K4 spare for Boom luffing circuit. No.HS 64.3-A3525-3-0 for stacker cum Reclaimer , Complete Seal Kit of Variable Displacement Pump, Model A4VG125EP4D1 32R-NAF02F021DH for Paddle feeder. , Ball Valve with cranked handle KHP25-1-1-2, spare of hydaulic system for paddle feeder MC No. -PF 43-46 , Manifold Block Assembly with Valves P No. 314300608, 1 Pr Relief Valve DBDS6 K1 X 200,2 Gauge Isolator Valve AF 6EP 4X X, 3 Dir Cont Valve 4W M6G 6X IN002, 4 Dbl.Throttle Check Valve Z2FS6-2-4X 2QV , Cylinder CD250 B 80-56-486 A1X 01 CGDMA SP, Item Code -M-19953, for Hydraulic Power Unit of Door Opening for Ring Granulator, Make - Rexroth , Gear pump 4CC, Part No. F002E10001, Circuit Drawing No. HS-64.3-A3649-3-0-3-0, for Hydraulic Power Unit of Door Opening for Ring Granulator, Make- Rexroth. , Seal Kit for Pump A10 VSO 45 Spare for hydraulic system for Boom Luffing hydrulic circuit no- HS 64.3-A3525-3-0 , Set of Seal Kits for Cylinder CD250 B 80 56-486 A1X 01 CGDMA SP, Item Code -M-19953, Make - Rexroth , Pressure reliefe valve Pt. No. V02507 DBDS 6K 1X 200,Pressure reliefe valve Pt. No. V02507 DBDS 6K 1X 200 , Check Valve S6 A 1.0, Part No. C01002, Circuit Drawing No. HS-64.3-A3649-3-0-3-0 for Hydraulic Power Unit of Door Opening for Ring Granulator. , Eye for Cylinder CD250 B 80 56-486 A1X 01 CGDMA SP, Item Code -M-19953, Make - Rexroth

Details: Description:- Launching Of Precast Rcc Box Segments For Rubs/limited Height Subways (lhs) Of any Size And Barrel Length For Single/double Line As Per Approved Drawings To The Correct Alignment and Position In Electrified /non-electrified Sections Safeguarding All Utilities (s&t Cable, Power Cable, ohe, Pipelines Etc.) Including Transportation Of Box Segments From Casting Yard To Site Of Launching, dismantling Of The Existing Track, Removing & Stacking Of Ballast, Cutting Of Formation And Approach road Below Or Above Bed Level, Placing Of Base Slabs & Box Segments In Position, Backfilling After launching Of Precast Box Segment, Ballasting & Re-laying Of Track To Correct Alignment And Geometry, packing And Further Maintenance Till Allowing Non-stop 20 Kmph Over The Re-laid Track, Complete In All respect To The Satisfaction Of Engineer-in-charge. The Rate Is All Inclusive Except The Cost Of Rcc Box segments, Base Slabs And Backfill Material Which Shall Either Be Supplied By Railway Or Paid Extra under Relevant Item. Note: Minimum Equipment Required During Block Shall Be (i) Crawler Mounted hydraulic Excavator Of Min 200 Hp And Bucket Capacity 2.5 Cum - 3 Numbers And (ii) 3 Cranes Of adequate Boom Length Suitable For Launching Box Segments In Position (min Capacity Of Each Crane - 200 Mt For Single Line And 300 Mt For Double Line) Apart From Other Equipments, Tools, Plants And machinery Required To Complete The Job Within The Allowed Block Period.

Description: CATEGORY: Supply of Super Structure over Hard Standing of size 30mx10mx5m as per tech specification and drawing att. , Cement 43 Grade OPC packed in HDPE bag each 50 kg wt , Hardcore 63 to 90mm , Coarse Sand free from vegetation , Coarse aggregate 20mm graded , Coarse aggregate 40mm graded , Mild Steel Bars of size 6 to 8mm dia , Mild Steel Bars of size 12 mm and above dia , Mild Steel Bars of size 16 mm and above dia , MS Binding Wire , Wooden planks for shuttering IInd class wood of size 3.0 x 0.30 x 0.026m , Nails various sizes , Bricks Sub class B , Painting Brush 4 inch , Red Oxside paint , Synthetic Enamel Paint , Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt , 80 mm thick coloured Interlocking precast paver block I shape , Distribution box 8 Way , MCB SPN 240 Volts 32 Amps , MCB SP 6 to 32 Amps , PVC tape 19mm wide 5 m long , Cable PVC insulated electric cable 1.5 sqmm single core , Cable PVC insulated electric cable 2.5 sqmm single core , PVC casing capping 1 inch , PVC casing capping 3 by 4 inch , Switch Piano 5 Amp 230 Volts Flush type one way , LED Tube light fittings 15W 230V box type 4 feet , Screw full thread 6 x 19 mm , Steel Screw full thread with rawl , PVC switch board 7 inch by 4 inch , PVC switch board 8 inch by 10 inch , PVC L and T bend , Switch socket combination 2 in 1 15 Amp 230 Volts , Switch socket combination 5 Amp 230 Volts , Service bracket 40mm dia GI Tubing medium grade 1.5 Mtr Long , Service cable PVC insulated aluminium conductor 10 Sqmm 2 core , Ceiling Rose three terminal , LED Bulk head fitting high pressure die cast , PVC Flexible wire copper conductor multi stranded , PVC Flexible Conduit pipe 15 mm dia , PVC Round block , Earthing plate 600 x 600 x 6 mm , CI Earth Pit Cover of size 300 x 300 x 6 mm , Funnel fitted with 20 mm diameter GI Pipe 1.5 m Long. , GI wire 4 mm diameter for earthing. , Charcoal , Salt normal , Air terminal single pointed aluminium rod 12mm dia and 300mm long. , Testing point terminal block make of Gun metal , Aluminium strips 25x3mm. , Galvanised iron strip 32x6mm. , Funnel fitted with 20mm dia GI Pipe 1.5m lon , Earthing Plate 600x600x6mm GI steel , CI earth pit cover of size 300x300x6mm , Insulating PVC block 75x75x30mm , Hammer 1 Kg with wooden Handle , Measuring tape 30Mtr , Crow Bar 1.5 inch dia 4 feet long , Hammer 1 by 2 Kg with handle , Hand Gloves rubber ISI marked , Empty drum plastic 200 ltr , Hand gloves leather best quality ISI marked , Gum Boot , Safety Helmet , Brick Line 30 Mtr , Traveler Brick Mason , Iron plaster , Sprit Level , Wooden Plaster , Showel GS MK II , Kassi with handle , Axes felling 3 Kg , Pan Morter

Description: CATEGORY: Supply of Super Structure over Hard Standing of size 30mx10mx5m as per tech specification and drawing att. , Cement 43 Grade OPC packed in HDPE bag each 50 kg wt , Hardcore 63 to 90mm , Coarse Sand free from vegetation , Coarse aggregate 20mm graded , Coarse aggregate 40mm graded , Mild Steel Bars of size 6 to 8mm dia , Mild Steel Bars of size 12 mm and above dia , Mild Steel Bars of size 16 mm and above dia , MS Binding Wire , Wooden planks for shuttering IInd class wood of size 3.0 x 0.30 x 0.026m , Nails various sizes , Bricks Sub class B , Painting Brush 4 inch , Red Oxside paint , Synthetic Enamel Paint , Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt , 80 mm thick coloured Interlocking precast paver block I shape , Distribution box 8 Way , MCB SPN 240 Volts 32 Amps , MCB SP 6 to 32 Amps , PVC tape 19mm wide 5 m long , Cable PVC insulated electric cable 1.5 sqmm single core , Cable PVC insulated electric cable 2.5 sqmm single core , PVC casing capping 1 inch , PVC casing capping 3 by 4 inch , Switch Piano 5 Amp 230 Volts Flush type one way , LED Tube light fittings 15W 230V box type 4 feet , Screw full thread 6 x 19 mm , Steel Screw full thread with rawl , PVC switch board 7 inch by 4 inch , PVC switch board 8 inch by 10 inch , PVC L and T bend , Switch socket combination 2 in 1 15 Amp 230 Volts , Switch socket combination 5 Amp 230 Volts , Service bracket 40mm dia GI Tubing medium grade 1.5 Mtr Long , Service cable PVC insulated aluminium conductor 10 Sqmm 2 core , Ceiling Rose three terminal , LED Bulk head fitting high pressure die cast , PVC Flexible wire copper conductor multi stranded , PVC Flexible Conduit pipe 15 mm dia , PVC Round block , Earthing plate 600 x 600 x 6 mm , CI Earth Pit Cover of size 300 x 300 x 6 mm , Funnel fitted with 20 mm diameter GI Pipe 1.5 m Long. , GI wire 4 mm diameter for earthing. , Charcoal , Salt normal , Air terminal single pointed aluminium rod 12mm dia and 300mm long. , Testing point terminal block make of Gun metal , Aluminium strips 25x3mm. , Galvanised iron strip 32x6mm. , Funnel fitted with 20mm dia GI Pipe 1.5m lon , Earthing Plate 600x600x6mm GI steel , CI earth pit cover of size 300x300x6mm , Insulating PVC block 75x75x30mm , Hammer 1 Kg with wooden Handle , Measuring tape 30Mtr , Crow Bar 1.5 inch dia 4 feet long , Hammer 1 by 2 Kg with handle , Hand Gloves rubber ISI marked , Empty drum plastic 200 ltr , Hand gloves leather best quality ISI marked , Gum Boot , Safety Helmet , Brick Line 30 Mtr , Traveler Brick Mason , Iron plaster , Sprit Level , Wooden Plaster , Showel GS MK II , Kassi with handle , Axes felling 3 Kg , Pan Morter