Drawer Tenders

Details: SET OF SEATS & BERTHS FOR LHB GS COACHES. FOLLOW CUSHIONING MATERIAL PU F OAM TO RDSO SPEC. RDSO/2007/CG-04 REV.-01 AND UPHOLSTERY TO RDSO SPEC.RDSO/2008/CG-07 REV.-01 WITHOUT FIRE BARRIER. FOLLOW COLOUR SHADE ALNAC-03 FOR UPHOLSTERY. FOR PAINTIN G OF THE VISIBLE METALLIC PORTIONS OF SEATS & BERTHS COLOUR SHADE RAL-9006 TO BE FOLLO WED., as per Drawing: MPLSEATGS VERSION 0, Packing Instruction: ALL PROTRUDING PORTIONS OF S EAT/BERTH SHOULD BE PROTECTED WITH ENVIRONMENT FRIENDLY PRE MOULDED THERMOCOL CAP OF REQUISITE STRENGTH OR SILICON RUBBER CAP AS AN ALTERNATE OPTION. EACH INDIVIDUAL SEA T/BERTH SHOULD BE COVERED WITH BIODEGRADABLE BUBBLE SHEET OF DIAMETER 10MM AND THIC KNESS 30 MICRON ALL ROUND. FLAP OF BERTH SHOULD BE OUTSIDE THE BUBBLE SHEET PACKING LE AVING SEAT & BERTH MOUNTING UNCOVERED. THEN IT SHOULD BE WRAPPED ALL ROUND IN THICK L AMINATED JUTE FABRIC OF SUFFICIENT STRENGTH. THE ASSEMBLY SHOULD BE TIED WITH NYLON STR IPS. IT IS FURTHER WRAPPED WITH BIODEGRADABLE POLYTHENE ALL ROUND TO PREVENT INGRESS O F DUST/WATER. FOR THE FOLLOWING ITEMS (IF COVERED UNDER S&B SET) THE ITEM-WISE PI (LATEST VER.) WILL B

Details: Supplying, Fabrication, Erection on suitable RCC foundation and Commissioning including 3 (three) months Trial Run and 5 (five) years Operation and Maintenance including cost of routine testing of water sample for performance evaluation of Pressure Type Iron Removal Plant (Cumulative Capacity of 420 cum /hr)as per design norms of the P.H.E. Dte. with necessary accessories viz. MS fabricated shell with minimum 10 mm thick MS plate with 2 (two) coats of anticorrosive paint minimum 12 mm thick MS media supporting plate fitted with required no. of pot strainer, MS fabricated oxidation chamber with minimum 10 mm thick plate with necessary pipe connection, valves, Gauges & other instruments as required including preparation of detailed design & drawings duly vetted from IIT/NIT/JU/IIEST and the same is approved from the Deptt. including cost of filter media, Air Compressor & Air blower with motor, starter, main switch etc. of required capacity & approved specification including power connection from main line etc. all complete and construction of Blower Room, concrete platform & drain...etc. with common manifold connection for the water supply scheme within Buniadpur Municipality (Zone -1 to 7) under AMRUT 2.0.

Details: Description :mch Lock Assembly With 2 Key As Per Specification. Size: As Per Drawing No- B8/rs/72 57 Material: Main Body Lock - Free Cutting Brass (c3604bd) Cylinder-c3604bd, Cr-plate Latch-stainle ss Steel Bar (sus304) Finish Main Body: Nickel Plating (mbni) Lock: Chrom Plating (mbcr) Key Turn 9 00 Hardness: Ss Material - 70 Hrb Brass Material - 22-133 Hrb Uts (ultimate Tensile Strength ): 50 0-700 Mpa Endurance Test: 40,000 Cycles Operation Material Composition: Copper - 56.69%, Zinc - 3 8.67%, Tin - 0.600%, Lead - 2.28%, Iron - 0.620%, Aluminium - 0.510%, Nickel - 0.520%, Manganese - 0.038%, Arsenic - 0.012%, Phosporus - 0.013% And Silicon - 0.038% Hardness: 22-133 Hrb Uts (ult imate Tensile Strength ): 124-1030 Mpa Endurance Test: 40,000 Cycles Operation Note: All The Test C ertificates Should Be From Nabl Accredited Labs And Duly Signed And Sealed By A Signatory Authority of The Supplier. Make: Melco/takigen/amar Trading. ]

Details: Notice Inviting E-tender Punjab & Sind Bank, Guwahati Zonal Office Invites E- Tenders Under 2 Bids System I.e. Technical Bid & Financial Bid, From Reputed, Bona Fide And Intending Contractors In The Prescribed Format For Interior Furnishing (allied Works) Of Zonal Office Guwahati On 4th Floor Of Sethi Trust Building At Bhangaghar, G.s. Road, Guwahati, Assam. The Tender Is To Be Submitted Only By Eligible Furnisher Through Online Mode Only. Tender Documents, Technical Specification, Drawing, Bill Of Quantities Uploaded On Specific Interface Which Will Be On The Bank’s E-procurement Site. Furnisher May View The Tender Notice On Bank’s Website Https://punjabandsindbank.co.in And Download & Upload The Same From/on Bank’s E-procure Website Https://psb.eproc.in The Tender Should Be Uploaded On The Above Website Up To 24.02.2025 By 03.00pm. Technical Bid Will Be Opened On 24.02.2025 At 3.30 Pm. As Mentioned In The Tender Documents. The Bank Reserves Right To Cancel Any Or All Tenders And Stop The Process At Any Point Of Time Without Assigning Any Reason Or Notice Whatsoever. For Any Further Clarification/query Contact-+91-7896536440 During Office Hours From 10.00 Am To 5.00 Pm Over Phone Or In Person. Zonal Manager Click Here

Details: Notice Inviting E-tender Punjab & Sind Bank, Guwahati Zonal Office Invites E- Tenders Under 2 Bids System I.e. Technical Bid & Financial Bid, From Reputed, Bona Fide And Intending Contractors In The Prescribed Format For Proposed Interior Furnishing, Electrical, Lan Cabling, Ac Works, Cctv, Fire Alarm & Civil Work For Interior Renovation & Re-furnishing Of Model Branch At Deulahland, Imphal, Manipur. The Tender Is To Be Submitted Only By Eligible Furnisher Through Online Mode Only. Tender Documents, Technical Specification, Drawing, Bill Of Quantities Uploaded On Specific Interface Which Will Be On The Bank’s E-procurement Site. Furnisher May View The Tender Notice On Bank’s Website Https://punjabandsindbank.co.in And Download & Upload The Same From/on Bank’s E-procure Website Https://psb.eproc.in The Tender Should Be Uploaded On The Above Website Up To 26.02.2025 By 03.00pm. Technical Bid Will Be Opened On 26.02.2025 At 3.30pm. As Mentioned In The Tender Documents. The Bank Reserves Right To Cancel Any Or All Tenders And Stop The Process At Any Point Of Time Without Assigning Any Reason Or Notice Whatsoever. For Any Further Clarification/query Contact-+91-7896536440 During Office Hours From 10.00 Am To 5.00 Pm Over Phone Or In Person. Zonal Manager Click Here

Details: Running Contract For 10125 Mm Curved Switches With Zu-1-60 / 60e1a1 Thick Web Grade 880 Class A Tongue Rails And Uic 60 Kg/m Grade-880, Class A/b Stock Rails With Elastic Fasteners And Spring Operated Setting Device (rdso-t/6216 Read Along With Alterations), Complete With All Fittings For 1 In 12, Bg 60 Kg Turnout For Fan Shaped Layout On Psc Sleepers I.e. All Fittings For Switch Portion As Per Sub Assembly Drg. No. Rdso/t-6155 (read Along With Latest Alterations) In Accordance With Rdso Standard Drawing No.t-6154 (read Along With Latest Alterations) Excluding Standard Fish Plates, Fish Bolts And Nuts, Er Clips & Insulating Liners, Conforming To Spn: T-10-2023, With Latest Alteration/corrigendum If Any As Amended Upto Date Of Closing Of Tender. The List Of Fittings As Per Annexure-c. Any Additional Or Modification To The List Of Fittings Issued By Rdso In Subsequent Alteration Up To The Date Of Closing Of Tender Is Also To Be Supplied By Firm For Which No Additional Payment Would Be Made. Note:- Asymmetrical Zu Rails For Tongue Rails As Well As Rail For Stock Rails & Check Rails Shall Be Arranged By Vendor At His Own Cost. The Quoted Rate Shall Be All Inclusive Of Above.

Details: Description :supply Of Smps Based Ips System Suitable For 3/4 Line Station In Re Area And Conforming to Rdso Specn. No. Rdso/spn/165/2023 Version 4.0 With Amendment-1, Along With Remote Indicatio n Panel. The Total Number Of Supplies And Their Modules Rating/capacity Of Each Type Of Supply Shall B e As Per Attached Drawing Of Nwr. This Item Also Includes Supply Of 2v/300 Ah Lmla Batteries (55+5 nos.) It Covers Supply Of Tool Kit Containing All Type Of Tools Required For Maintenance Of Ips And Set Of spare As Recommended/ Mentioned In Rdso Specn. No. Rdso/spn/165/2023 Version 4.0 With Amen dment-1. It Includes Supply Of Proper Hard Wood Stand For Keeping Batteries As Per Sample Approved B y Engineer At Site. The Length Of Cables To Be Supplied With Each Ips System Will Be As (a)cable From Ip s System To Battery Bank-30 Mtrs. (25 Sq. Mm) (b) Cable From Ips System To Asm Box - 100 Mtrs. (12 C ore X1.5 Sq.mm Signalling Cable).the Technical Specification Of These Above Said Cables Will Be As Per R dso's Letter Sts/e/ips/genl Dated 03.04.2018. Only Supply Is Required. ]

Details: Description :supply Of Smps Based Ips System Suitable Up To 5/6 Line Station In Re Area An d Conforming To Rdso Specn. No. Rdso/spn/165/2023 Version 4.0 Amendment-1, Along With remote Indication Panel. The Total Number Of Supplies And Their Modules Rating/capacit y Of Each Type Of Supply Shall Be As Per Attached Drawing Of Nwr. This Item Also Include s Supply Of 2 V/300 Ah Lmla Batteries (55+5 Nos). It Covers Supply Of Tool Kit Containing all Types Of Tools Required For Maintenance Of Ips And Set Of Spares As Recommended/ mentioned In Rdso Specn. No. Rdso/spn/165/2023 Version 4.0 Amendment -1. It Includes Sup ply Of Proper Hard Wood Stand For Keeping Batteries As Per Sample Approved By Enginee r At Site. The Length Of Cables Will Be Supplied With Each Ips System Will Be As ( A Cable F rom Ips System To Battery Bank - 25 Mtrs. ( 25 Sq. Mm) (b) Cable From Ips System To Asm Bo x - 35 Mtrs ( 12 C X 1.5 Sq. Mm Signalling Cable). The Technical Specification Of These Abo ve Said Cables Will Be As Per Rdso's Letter Sts/e/ips/genl Dtd. 03.04.2018. ]

Details: Description :supply Of Smps Based Ips System Suitable For Auto Hut/ Midsection Interlocked Lc Gate in Re Area And Conforming To Rdso Specn. No. Rdso/spn/165/2023 Version 4.0 With Amendment-1, along With Remote Indication Panel. The Total Number Of Supplies And Their Modules Rating/capacity Of each Type Of Supply Shall Be As Per Attached Drawing Of Nwr. This Item Also Includes Supply Of 2 V/300 ah Lmla Batteries (55 Nos+5 Nos.) It Covers Supply Of Tool Kit Containing All Type Of Tools Required For maintenance Of Ips And Set Of Spare As Recommended/ Mentioned In Rdso Specn. No.rdso/spn/165/ 2023 Version 4.0 With Amendment-1. It Includes Supply Of Proper Hard Wood Stand For Keeping Batter ies As Per Sample Approved By Engineer At Site. The Length Of Cables To Be Supplied With Each Ips Syst em Will Be As (a) Cable From Ips System To Battery Bank - 25 Mtrs. (25 Sq Mm) (b) Cable From Ips Syste m To Asm Box - 35 Mtrs. (12 C X 1.5 Sq Mm). The Technical Specification Of These Above Said Cables Will be As Per Rdso's Letter Sts/e/ips/genl Dated 03.04.18 Installation And Commissioning Is Not Required. ]

Details: Creation of 63 KVA Electric Sub Station Moh. Makhna Ward No. 7 Pyt. Bhatidhar, 25 KVA Transformer at Ward No. 1 Panchayat Karmara Mohalla Bakarwala, Providing of Electricity by way of uncovered areas in village Gagrian Sawjian, Kanari Upper, Sib Loran, Balnoi Top, Chamrar, Doba Mora and Salani Top by way of Providing of 2x63 KVA S/Stn +3x25 KV Sub Statin alongwith HT/LT Line and Poles, Creation of 63 KVA Sub Station at Mohalla Domallan Keri Near Mohd Javir Panchyat Gulhotta Kangra, 63 KVA Transformer Mohalla Tand Ward No. 8 Pyt. (Chhungan Choudhrain), 63 KVA Transformer Nr. Pervaiz Khan Mohalla Marg Pyt. Sangoite, Creation of 63 KVA Transformer at Mohalla Sayidan Near Zarayat Ralian, Laying of LT Line at Danna Doyian Mohalla Kumaran Ward No. 1 Panchyat Timbra, Laying of LT at Qazi Mhra ward No. 1 and Creation of 63 KVA Sub Station alongwith Poles at Moh. Sheikh Maglanu Nar Mankote Nr. Mir Mohd under SSY & APDP Grant 2024-25 (All the items should be as per latest specifications and drawing adopted/Approved by Department)