Drawer Tenders

Details: Supply And Fixing Of Aluminum Partition Using Standard Powder Coated / Anodized Aluminum Section Of Double Groove Of Size 63.5 X 38.1 X 1.08 Mm Thick / Single Groove Of Size 63.5x 38.10x 1.41mm Thick And Door Section 44.5x44.5x1.3mm Thick And Prelaminated Particle Board 12mm Thick And 5mm Thick Plain Float Glass With Suitable Aluminum Glazing Clips Including Godrej Lock And Handles, Door Handles, Tower Bolts And Door Stopers And Approved Brand Silicon Sealant Including Cost And Conveyance Of All Materials Labour Charges For Manufacturing Fixing In Position Using Wooden Blocks And Sheet Metal Screw Etc., To Complete For Finished Of Work As Approved By Engineer- In- Charge Complete As Per Drawing. Providing And Fixing Cast Iron Body Bottle Type Hydraulic Door Closer (is: 3564) With Double Speed Adjustment, With Necessary Accessories And Screws Etc. Complete

Details: Front Part(schedule Of Infrastructural Requirements To Mdts21261 Rev-03 Dated 09.06.2020) To Be Masked As Per Drg. No Mi005396 Alt.'e' For Lhb Type Coach. Note:- ( 1) Protection Procedure As Per Dy Cple-iii Annexure-app Dated 14/05/2024. (2) Dimensions As Per Dy Cple -iii Annexure-ufp Dated 15/05/2024., As Per Drawing: Mp13uframebio Version 3, Packing Instruction: No Special Packing Required. The Protruding, Threaded Portion, Gauge S And Loose Items Etc. If Any Are To Be Protected With Suitable Covering To Prevent It Fr Om Damage. However Transit Damage If Any Shall Be At The Cost Of Supplier. [ Warranty Period: 30 Months After The Date Of Delivery ] ] Consignee Shell Depot, Rcf Punjab 919.00 Set Uvam Item Ref. ( Item Id :- 2400007 - Front Part , Sub Item Id:-2400007001 - Front Part ) Inspection Details Stage Inspection Not Required

Details: Description :manufacture And Supply Of High Viscous Nylon (hvn) -66 Insulating Lines For Wider Sleeper To Rdso Drg No. T-6938 Alt-2 (gauge Side Liner) And t-6939 Alt-2 (non Gauge Side Liner) (or Latest Alt. If Any) For Use With Psc Sleeper To Rdso Drg. No. Rt-8527 & Rt-7008 Suitable To 60 Kg (uic)/ 60e1/ 136re Ra ils, As Per Confirming To Irs Specification S.no.t-44-2023 (second Revision) Or Latest. (one Set Of Liner Consists Of One Number Hvn Liner To Rdso Drg. No. T- 6938 And One Number Hvn Liner To Rdso Drg. No. T-6939) (the Alteration In Drawings And Specifications Issued By Rdso Up To Seven Days Before The Tender closing Date Shall Be Applicable To This Tender.) [ Warranty Period: 30 Months After The Date Of Delivery ] [quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ]

Details: Provn Of External Services At Certain Places At Af Stn Nagpur (ph-i)- Construction Of Block Of Pump House Complete All As Specified And As Shown In Drawings, M&l For Laying And Compacting 250 Mm Thick (compacted Thickness) Granular Sub Base Course (gsb) Grading As Per Grade Ii As Specified Table 400-1 Of Marth Specifications For Road And Bridge Works, 2013, In Two Layers Of Each 125mm Over Compacted Subgrade With Natural Sand, Crushed Gravel, Crushed Stone, Crushed Slag Or Combination Thereof As Per The Grading Required The Materials Are Mechanically Mixed, Spread And Leveling On The Subgrade By Using Motor Grader Of Adequate Capacity, And Rolling With Vibratory Roller Of Capacity 80-100 Kn Static Weight For Achieving Required Compaction Density Of Atleast 98% Of The Maximum Dry Density. Consolidating To Required Gradient And Camber Complete All As Specified And Directed With Finished Surface Tolerances As Per Table 900-1 Of Morth Specifications For Road And Bridge Works, 2013. Complete All As Specified & Directed.

Details: Description:- Modification/alterationinexistingei(electronicinterlocking)asperlatestrdso guidelines/tan. It Includes: Design And Modifi Cation In Existing Interface And Interlocking Circuits And logic Of Ei System Including Modifi Cation In The Vdu(video Display Unit)/ Lcp(local Control Panel)/ ccip (control Cum Indication Panel), Maintenance Terminal (mpc), Data Logger, Relay Rack Wiring. The complete Work Should Comply With The Latest Rdso Specifi Cations And Guidelines And As Per Approved sip And Circuit Diagrams. All The Material (interface Cards / Relays / Wiring Material / Connectors / Fuses / Communication Devices Etc.) Shall Be Provided By The Contractor. The Work Also Includes The Supply of Modifi Ed Selection Table, Interface Circuits, Vdu/lcp/ccip Diagram Etc. To Suit The Modifi Ed Sip. It also Includes The Carrying Out Of Fat, Sat (as Applicable) Jointly With Railways And Satisfactory commissioning. All Plans/drawings/circuits Etc. Should Be Prepared On Auto Cad, Soft Copy To Be supplied On Pen Drive And 06 Sets Of Hard Copies Also To Be Supplied.

Details: Description:- Modification/alteration In Existing Medha Make Ei (electronic Interlocking) As Per Latest rdso Guidelines/tan. It Includes: Design And Modification In Existing Interface And Interlocking circuits And Logic Of Ei System Including Modification In The Vdu (video Display Unit)/ Lcp (local control Panel)/ Ccip (control Cum Indication Panel), Maintenance Terminal (mpc), Data Logger, Relay rack Wiring. The Complete Work Should Comply With The Latest Rdso Specifications And Guidelines And as Per Approved Sip And Circuit Diagrams. All The Material (interface Cards/relays/wiring Material/ connectors/fuses /communication Devices Etc.) Shall Be Provided By The Contractor. The Work Also includes The Supply Of Modified Selection Table, Interface Circuits, Vdu/lcp/ccip Diagram Etc. To Suit the Modified Sip. It Also Includes The Carrying Out Of Fat, Sat Or Two Rounds Fat (as Applicable) Jointly with Railways And Satisfactory Commissioning. All Plans/drawings/circuits Etc. Should Be Prepared On autocad, Softcopy To Be Supplied In Pen Drive And 06 Sets Of Hard Copies Also To Be Supplied(as Per condition In Tender Docuemnts)

Details: Auction Sale Of Immovable Property - Flat Number: 505, On The Fifth Floor super Built-up Area: 1200 Sq Ft layout: 3 Bedrooms, 1 Drawing Cum Dining Room, 1 Kitchen, 2 Toilet Bathrooms, 2 Balconies, And One Four-wheeler Car Parking Space. land Share: Undivided Proportionate Share Of 100 Sq Ft (or 0.23 Decimal) Out Of The Total Area Of 11.50 Decimal. location: Mauja (village) - Asangi, Thana (police Station) - Adityapur, A.n.a.c. Ward No. 4 (old), 10 (new), Thana No. 126. land Records: Old Khata No. 182, Old Plot No. 668, New Khata No. 281, New Plot No. 427. registration: District Sub-registry Office, Saraikela, District-saraikela-kharsawan, Jharkhand. boundaries: north: Public Road (corridor) south: Lane east: Flat No. 504 west: Lane mortgage Details: mortgagor: Shri Mandeep Singh sale Deed Number: 698/669, Dated 08.03.2022

Details: Description:- Modification/alterationinexistingei(electronicinterlocking)asperlatestrdso guidelines /tan. It Includes: Design And Modification In Existing Interface And Interlocking Circuits And logic Of Ei System Including Modification In The Vdu (video Display Unit)/ Lcp (local Control Panel)/ ccip (control Cum Indication Panel), Maintenance Terminal (mpc), Data Logger, Relay Rack Wiring. The complete Work Should Comply With The Latest Rdso Specifications And Guidelines And As Per Approved s I P A N D Circuit Diagrams. A L L Thematerial (interface Cards/re1ays/wiringmaterial/connectors /fuses/communication Devices Etc.) Shall Be Provided By The Contractor. The Work Also Includes The supply Of Modified Selection Table, Interface Circuits, Vdu/lcp/ccip Diagram Etc. To Suit The Modified sip. It Also Includes The Carrying Out Of Fat, Sat (asapplicable) Jointly With Railways And Satisfactory commissioning. All Plans/drawings /circuits Etc. Should Be Prepared On Autocad, Softcopy To Be supplied On Pen Drive And 06 Sets Of Hard Copies Also To Be Supplied.(alteration Involving Modification from 11 Up To 20 Routes. )

Details: One Coach Set Of Roof For Train Set Mc, Mc2, Ndtc/ec & Ndtc/ec2 Coaches. To Drawing Numbers: I) Middle Roof Assembly To Drg. No. 72716001 Col. 1, Alt. 'j' -1 No. Ii) Flat Ro Of Assembly-pp End To Drg. No. 72716016 Col.i Alt. 'g' -1 No. Iii) Flat Roof Assembly-npp End To Drg. No. 72616003 Col.i Alt. 's' -1 No. Note: Drg. No. Aaa51072 To Be Read As Mcf-le64101 Alt. 'nil' The Firm Shall Fulfill The Requirement As Per Icf/md/specn.200, Issue Status-01,re V-04 With Amendment No. -01 And Revised Appended Note For Stainless Steel Roof Assemb Ly Dated: 02.12.2020. Special Conditions: A) Firm Shall Confirm And Obtain The Exact Drawin Gs To Be Followed From Mcf, Before Start Of Manufacturing. B) Suitable Packing To Be Done To Prevent Transit Damage. [safety Item] [ Warranty Period: 30 Months After The Date O F Delivery ]

Details: G.i.wire, 10 Swg , Reflective Fluorescent Strip Jacket , Ht hand Gloves,11kv , Insulating Rubber Mat,33kv , pvc,heavy Duty Suction Discharge Helical Water Hose,size 3 inch , Pu Coated Hand Gloves,heat Resistant , Cutting wheel 4 Inch , Grinding Wheel 8 Inch X 1.5 Inch X 0.75 inch,rough , Air Sample Sampling Bag , Aspirator Having facilities Of Fitting To Drawing Point And Sample Bag , Check board,1 Feet X 1 Feet , Check Board,1 Feet X 2 Feet, , Check board,4 Feet X 3 Feet , Safety Belt,3mtr Long,10mm,2000kg load Capacity, As Per Is3521 1999 , Taper Shank Twist Drill 25mm , G.i.wire Netting Mesh 2 Inch X 2 Inch, , Protective safety Goggles For U G Use , Dust Mask,half Mask respirator With Clear Communication With Head Harness