Drawer Tenders

Details: Description :supply And Installation Of Frp Modular Toilet For Amrit Bharat Pantry (lwc b/pp) Coaches., As Per Drawing: Lwcb/pp (981)-6-3-002 Latest Alt And As Per Spec Icf/md/spec- 436 With Annexure-i. (qpc=02). Note-1:- Overall Height Of All Lavatory Modules Shall Be 2120-05 Mm Instead Of 1950?5mm And Lavatory Door To Be Modified Accordingly. Note-2:- electrical Power Panel Shall Be Mi006807 Instead Of 32963309 For Item No. 12 Of Lws/pp2( 754)-6-3-002 As Per Dy. Cme/design-fur L. No. Md48161 Dated 19.12.2024. Note-3:- Please Fol low Rcf/design L. No. Md48161 Dated-19.12.24 & 21.12.24. Installation & Commissioning: In clusive [ Warranty Period: 84 Months After The Date Of Delivery ] ]

Details: Description :set Of Purge-o-mat Automatic Float Air Vent Valve And Vacuum Valve For Roof Water Tank 30l Mounting For lhb Coaches. 1) Purg-o-mat Automatic Float Air Vent Valve With Shut-off Valve Having Thread Bsp 3/8 Inch To Rcf Drg. No. lw63150, Item-4, Alt-e, Qty/set: 1no. 2) Vacuum Valve G-1/2 Inch To Rcf Drg. No. Lw63150, Item-3, Alt.e, Qty/set: 2 Nos. Note:(1) as Per Drawing Air Vent Valve And Shut-off-valve Must Be Procured From M/s Hans H. Voss Tulpenweg Or M/s Calefi Or M/s watts Industries Italy. (2) One Advance Sample To Be Got Approved By The Consignee For Functional Requirements Before bulk Supply. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

Details: Description:- Design Of Ballastless Track Using Contractor's Own Fastening System For Axle Loads And speeds As Specified In The Technical Requirements & Technicalspecifications, Including Submission Of design Criteria, Calculations, Designmethodology,detailed Design, Detailed Drawings, Construction methodology, Qap, Maintenance Manuals, Damage Rectification Methodology, Including All Its Various components As Per Various Input Parameter And Characteristics Of Various Component Of Fastening system, Etc As A Complete Job And As Directed By Engineer In Charge. The Design Will Be Property Of railway To Be Used In The Entire Rewa To Sidhi And Satna-panna Section For New Bg Rail Line Project.(a) for Track In Straight And Curves In Tunnels & Over Bridges Including Transition At Approaches.(b) For switch Expansion Joints (sej) Including Transition Portion If Any.(c) For Track In Straight And Curves On formations (cutting/filing) Including Transition Portion.(d) For Point And Crossings (1:8.5, 1:12 & 1:16) including Transition Portion If Any. (per Unit = Open Job (ls))

Details: Auction Sale Of Immovable Property - All That Flat No. F & G (north-east Side), Block No. Ii, On The Fifth Floor, Measuring An Area Of 1691 Sq. Ft., Consisting Of 3 Bed Rooms, 1 Dining Cum Drawing Room, 3 Toilets, 1 Kitchen, 1 Puja Room And 1 Balcony, Alongwith The Proportionate Impartible Share Of Land Attached To Said Building Known As "hari Om Dham," Lying And Situated, Bearing Municipal Holding No. 138, Dakshindari Road, Kolkata-700048, Ward No.33, P.s. Lake Town, Within The Local Limits Of South Dum Dum Municipality, Being Premises No. 124, Dakshindari Road, Kolkata-700048. documents And Ownership Details: Belongs To Bhagaban Lai Patel & Narendra Kumar Patel. Who Is Guarantions, Title Deed No: 3196 Of 2010, Registered On: 18-mar-10. Municipal Holding No.138, Dakshindari Road, Lake Town, Kolkata-700048.

Description: Cut Up Scrap Of Condemned Overaged Wagons No.1)85079460344 Ser Bvzc Air Brake2)30038961653 Nr Bcnm1 Air Brake3)30058961497 Nfr Bcnm1 Air Brake4) 30078962030 Ser Bcnm1 Air Brake5) 30028965647 Er Bcnm1 Air Brake6)30098962188 Scr Bcnm1 Air Brake7)30058966478 Nfr Bcnm1 Air Brake8)30098961242 Scr Bcnm1 Air Brake9)30028965968 Er Bcnm1 Air Brake10)10079464498 Ser Boxnm1 Air Brake11)30038802796 Nr Bcnm1 Air Brake12)30018714156 Cr Bcnm1 Air Brake13)30078964003 Ser Bcnm1 Air Brake14)30018765530 Cr Bcnm1 Air Brake15)30018962922 Cr Bcnm1 Air Brake16)30018963141 Cr Bcnm1 Air Brake17)30028961427 Er Bcnm1 Air Brake18)30018962441 Cr Bcnm1 Air Brake19)30058961206 Nfr Bcnam1 Air Brake20)30078962160 Ser Bcnm1 Air Brakeitems To Be Reclaimed In Sr. No. 1 To Sr. No.20 (1) 01 Wheel Set=02 Wheel With 01 Axle & 02 Axle Bearing Comp=04 Nos ( Sr.no.1=02 Nos) (2) As Per Drawing No-sk 69595,sk-69594,sk-69592,sk-77578,sk-78527,wd-83069-s/1,wd-95005/s-1) 01 Complete Casnub Bogie Assembly With Available Fitting{( 02 Side Frame, 01 Bolster, 01 Spring Plank ,02 Complete Break Beam (1 Bogie Brake Push Rod, 2 Equilising Lever, 4 Bk/bl),04 Adapter, 04 Em Pad, Helical Spring (outer-14, Inner-10, Snubber-04) Etc)}]= 2 Nos (except, Sr.no.2, Sr.no.8, Sr.no.13, Sr.no.15, Sr.no.19, Sr.no.20 And Sr No.01 Without Bogie,) (3).cbc Assembly = 2 Nos (4) Draft Gear Yoke Assembly=2 Nos. (5) D.v. With Common Pipe Bracket= 01 No.(6) Bk Cylinder= 1 Nosnote- All Reclaimed Items To Be Returned By Purchaser To Railway In Safe And Sound Condition.note (1)delivery Given At Wagon Cutting Yard At North Gate,32 Quarter Dahod/ Wagon Cutting Side At Iow Sliding/rgm Sliding, Iow, Dahod (2) Custodian- Sse Inspection (r) Dahod (3)location Dahod Workshop 4)gst-18% 5)cutting Allowed For Easy Loading. Fdp 50 Daysnote(6)-wagon Cutting And Loading To Be Carefully Done By Purchaser And No Littering To Be Done By Concerned Labour Of Purchaser At Cutting Location.

Description: CATEGORY: 223000005 FABRICATED RUBBER LINED BENDS 250MM, 45DEG PLUS FLANGE AS PER DRG NO 1123-01313000291 CPU 410-5H, 6ES74105HM080AB0 , 223000006 M.S. RUBBER LINED LATERAL- 45 DEG AS PER DRG NO. HCL-MCP- CONC-1268-05 , 223000012 M.S.RUBBER LINED BEND,90 DEG. AS PER DRG NO. 1179-02 , 223000014 M.S. RUBBER LINED BEND, 250 MM, 90 DEG AS PER DRG NO.779-91 , 223000015 M.S. RUBBER LINED BEND 45 DEG 250 MM AS PER DRG .NO.784-91 , 223000016 M.S. RUBBER LINED BEND 45 DEG 250 MM, L-325 MM, C-28 AS PER DRG.NO.1123-01 , 223000017 M.S.RUBBER LINED BENDS 45 DEG 250MM,A61,B61,C60,AS PER DRG.NO.786-91 , 223000018 M.S.RUBBER LINED BENDS 45 DEG 250MM,A66,A106,A108 AS PER DRG- 785-91 , 223000020 M.S.RUBBER LINED BENDS PLUS FLANGE 45 DEG, 250MM AS PER DRG NO.-HCL-MCP-CONC-783-91 , 223000027 M.S. RUBBER LINED BEND 30 DEG 250 MM, AS PER DRG. NO.1154-02 in which 1 no each against SL NO. 1 AND 3 , 223000028 M.S.RUBBER LINED BEND 30 DEG 250 MM, L- 695MM,AS PER DRG.NO.1154-02 , 223000029 M.S. RUBBER LINED BEND 30 DEG 250 MM AS PER DRG.NO. 1159-02 , 223000030 RUBBER LINED BENDS 250MM,AS PER DRG NO. 785-91 , 223000052 RUBBER LINE BEND AS PER DRAWING 781-91 , 223000059 RUBBER LINED PIPE WITH 300 CLASS FLANGE AT BOTH ENDS AS PER DRG 1220-04,LENGTH 455 MM , 223000061 M.S.RUBBER LINED PIPE,250 MM,L-500 MM,A-76, AS PER DRG.NO.1220-04 , 223000078 RUBBER LINED PIPE SEGMENT 250 MM, L-1200 MM AS PER DRG. NO.1219-04, B-24 , 223000097 M.S .RUBBERLINED PIPE SEGMENT,250MM,L-350MM,AS PER DRG.NO.1220-04,C-75 , 223000104 Rubber Lined Pipe Segment as per Drg. No. HCL- MCP-CONC-1220-19 A-85, B-85 , 223000107 Rubber Lined Pipe Segment as per Drg. No. HCL-MCP-CONC-1220-22 A- 102, B-103, C-103

Description: CATEGORY: Gel Pen (V3) (Q4) , Rollerball Pen (V3) (Q4) , Eraser (Q4) , Correspondence Envelopes (V2) (Q4) , Self Adhesive Flags (V2) (Q4) , Sticky Notepad (Q3) , Binder Clips (V2) (Q3) , Ball Point Pens (V2) as per IS 3705 (Q4) , Fluid Correction Pen (V2) (Q4) , read write compact disc cd (Q4) , Compact Disk Cases - CD - DVD Case (Q4) , Box File (Q4) , Floor Cleaner (V2) (Q4) , Toilet Cleaner Liquid (V2) conforming to IS 7983 (Q4) , mosquito repellant cream spray and lotion (Q4) , Naphthalene (V2) as per IS 539 (Q4) , Sweeping Broom (V3) (Q4) , High Density Polyethylene Bucket (Q4) , Squeegee Washer Wiper Mopper (V2) (Q4) , Toilet Soap or Liquid (Q4) , Paper Adhesive, Liquid Gum and Office Paste Type as per IS 2257 (Rev) (Q3) , Display File (Q4) , File Folder Cover (V2) (Q4) , Register (V2) (Q4) , signaturebook folder (Q4) , mugs stainless steel single double walled with double wall moulded handle (Q4) , Desk Pads - Writing (V2) (Q4) , Permanent Marker Pen (Q4) , Water Jugs (Q4) , Desktop Calculator - Electronics (Q4) , Black Lead Pencils (V2) as per IS 1375 (Q4) , Pins, Paper, Straight as per IS 5653 (Q4) , Glass Cleaner, Liquid (V2) as per IS 8540 (Q4) , Dak Pad (V2) (Q4) , stamp pads (Q4) , Stamp - Pad Ink as per IS 393 (Q4) , Poker or AWL as per IS 10375 (Q4) , Sketch Pen (V2) (Q4) , binding punch machine (Q3) , Staplers (V2) (Q3) , Stapler Pin / Staples (V2) (Q4) , Spring File (Q3) , Tags for Files (V2) as per IS 8499 (Q4) , Packaging Tape (Q4) , Transparent Tape (V2) (Q4) , scissors (Q4) , Highlighter Pen (Q4) , knife blades (Q4) , Wall Clocks as per IS 12510 (Q4) , Cartridge (Drawing) Paper as per IS 1848 (Part 2) (Q4) , Photography Paper (V2) (Q4) , Air Freshener Liquid (V2) (Q3) , Paper weights (Q4) , Exam Pad (V2) (Q3) , pin cushions (Q4)

Details: Construction of Lal tank Project (without canal) on local nalla near village Kadodiya, Tehsil Makdone in block Tarana Distt. Ujjain Complete on Turnkey Basis as per detailed scope of Work, but not limited to that including Nalla - Closure work with minimum gross storage capacity of 0.80 mcm, live storage capacity 0.70 mcm, 140 Ha design irrigation and minimum peak designed flood of 70.34 cumec, Earth work for C.O.T., Puddle, Spill Channel, B.T., Filter Blanket, pitching etc. complete including construction of sluice. This work also Includes Finalisation of detailed alignment by Survey of Dam, Spill Channel, F.T.L., Submergence, Property. The work also comprises of planning Survey and investigation, geological Survey, Preparation of Drawing, Designs, Water Planning, alignment, Estimate of all components and obtaining approval full from the competent authority, preparation of land plans and land acquisition cases for award of private land of dam seat, submergence areas and land for approach channel and spillway with finalization and award from revenue authority and construction of suitable surplussing arrangements to safely pass design flood through spill channel upto main nalla including construction of all civil, mechanical and electrical works involved in the construction of dam as per approved drawings , construction of coffer dam including defect liability for 2 years after completion of the project and as directed by Engineer-in-charge. Providing and fixing of benchmark on both the flanks of the embankment and wherever required and at every structure, fixing of reference pillars of size 0.30m x 0.30m x 0.45m (0.15m above G.L). Water tightness test & Load bearing Test of structures shall be carried out wherever required & as directed by Engineer in charge. It may be noted that certain design criteria are fixed in this tender and the contractor has to design with-in the ambit of this criteria only. Taking measurements, preparation of bills and establishment of quality control unit at site for all field lab tests during construction work. Other necessary work required for construction of project and not limited to that. As directed by the engineer-in-charge as per details given in scope of work.

Details: One Coach Set Of Roof, 2mm Sidewall And Endwall For Lwscz Coaches. Sidew all Assembly To Drg.no.(329)icf/sk3-1-4-091, Alt A, Col-1 - 1 No And Roof Assembly To Drg.n o.(lwscz) 73916001, Alt C, Col-i - 1 No End Roof Assembly To Drg.no.(ls)58116066, Alt G, Coli - 2 Nos Welding Pin To Drg No 81410012, Alt Nil- 1 No To Be Assembled On Roof & Sidewall Endwall T o Drg. No.(lslrd)74115001, Alt F- 2 Nos Schedule Of Technical Requirement As Per Icf/md/sp ecn:200, Issue Status -01, Rev-04,amendment No-01 & Icf/md/specn 315, Issue Status-01, Rev00. Firm Has To Supply Roof And Sidewall Without Applying Etch Primer And The Firm Has To Apply Etch primer On Roof And Sidewall In Icf After Shell Assembly. Special Condition : Schedule A- (to Be Deliver ed To Shell) Complete Roof, Sidewall And End Wall To Be Supplied With Welding Pins Welde d To Roof Assembly As Per Drawing. Schedule B- (to Be Delivered To Fur) Cap To Drg No 4951 6008002, Alt A And Serrated Spring Washer To Drg No 49516008003, Alt A Of Required Quantity As per Drawing Are To Be Packed In Suitable Polythene Bags Of 100 Microns Thickness With Printed Label Wi th Complete Details Kept Inside The Polythene Bags. (complete Details: 1. Item Description, 2. Qty In the Packing, 3. Date Of Packing, 4. Po No., 5. Type Of Coach, 6. Vendors Name & Address) polythene Bags To Be Sealed Properly To Prevent Moisture And Water Entry. I) Packing As per Drg.icf/j&t/misc-2201, Alt E And Safety Instruction As Per Icf/j&t/sk-1867, Alt. Nil Ii) Sl.n o 16#b Of Note Of Drg No 582-1-6-002 Alt J To Be Strictly Followed. Packing For End Wall As Per Drg No. I cf/j&t/sk-1809, Alt A. [safety Item

Details: Supply And Fixing Of Aluminum Partition Using Standard Powder Coated / Anodized Aluminum Section Of Double Groove Of Size 63.5 X 38.1 X 1.08 Mm Thick / Single Groove Of Size 63.5x 38.10x 1.41mm Thick And Door Section 44.5x44.5x1.3mm Thick And Prelaminated Particle Board 12mm Thick And 5mm Thick Plain Float Glass With Suitable Aluminum Glazing Clips Including Godrej Lock And Handles, Door Handles, Tower Bolts And Door Stopers And Approved Brand Silicon Sealant Including Cost And Conveyance Of All Materials Labour Charges For Manufacturing Fixing In Position Using Wooden Blocks And Sheet Metal Screw Etc., To Complete For Finished Of Work As Approved By Engineer- In- Charge Complete As Per Drawing. Providing And Fixing Cast Iron Body Bottle Type Hydraulic Door Closer (is: 3564) With Double Speed Adjustment, With Necessary Accessories And Screws Etc. Complete