Drawer Tenders

Drawer Tenders

Western Railway - WR Tender

Goods
Electrical Goods and Equipments...+1Electrical and Electronics
Ireps
Ratlam, Madhya Pradesh
Closing Date6 Feb 2025
Tender Amount₹ 5 Lac 
This is an estimated amount, exact amount may vary.
Description: 603201268635 of 110v, 120ah,vrla Battery Set With 19 Monoblock (6v Each) Pre Charged With In tercell Connectors Without M.s. Casing., As Per Drawing/specification : Rdso/pe/spec/ac/0009 - 2014(rev-2) W/o Ms Casing(cradle). Set Of120 Ah Vrla Batteries Consisting Of 19 Monoblocks of 6v, 120 Ah Battery, Supply With Stack Box Along With Accessories Conforming To Rdso Spe cification No. Rdso/pe/spec/ac/0009-2014(rev). Make: Amara Raja, Hbl Or Exide Only ] section Engineer Madhya Pradesh 3.00 Set consignee (electrical Refg. & A/c) ratlam, Wr uvam Item Ref. ( Item Id :- 2400048 - 120 Ah Vrla Battery ) inspection Details Stage Inspection Not Required

Power And Non Conventional Energy Sources Department Tender

Goods
Publishing and Printing
GEM
North 24 Parganas, West Bengal
Closing Date7 Feb 2025
Tender AmountRefer Documents 
Description: CATEGORY: Plain Copier Paper (V3) ISI Marked to IS 14490 (Q4) , Air Freshener Liquid (V2) (Q3) , Air Freshener Solid and Gel (Q4) , Lever Arch File (Q4) , conference folder (Q4) , scissors (Q4) , Glue Stick (V2) (Q4) , Gel Pen (V3) (Q4) , Drawing Pins (V2) as per IS 5205 (Q4) , Paper Adhesive, Liquid Gum and Office Paste Type as per IS 2257 (Rev) (Q3) , mosquito repellant cream spray and lotion (Q4) , Tissue Papers (V2) (Q4) , Desk Pads - Writing (V2) (Q4) , Staplers (V2) (Q3) , paper or eyelet punches (Q4)

Goa Shipyard Limited - GSL Tender

Goods
Machinery and Tools
GEM
Corrigendum : Closing Date Modified
South Goa, Goa
Closing Date5 Feb 2025
Tender AmountRefer Documents 
Description: CATEGORY: MD HP breathing air compressor 9 CFM , Air dryer , Combined Started or Control Panel , Gauge Assembly board with suction and discharge pressure gauge, pipes, isolation cocks etc. , Loose fittings and instrumentation as applicable , Shock mounts with center and side holding down fasteners , Flexible pipes bellows for all equipment interface with external loose supplied system , Electrical items for connectorisation, termination i.e. lugs, gland etc. , First submission of binding drawing , Documentation hard copy , Documentation soft copy , IETM documentation , Service of service engineer for STW Commissioning trail CST etc , Service of service engineer for electrical work, pre checks, cable connection, instrumentation etc , Preservation and de preservatives , Commissioning spares , Onboard spares , Standard and Special Tools , Training and Training material

Indian Army Tender

Goods
Publishing and Printing
GEM
Corrigendum : Closing Date Modified
Dibrugarh, Assam
Closing Date20 Jan 2025
Tender AmountRefer Documents 
Description: CATEGORY: Register (V2) (Q4) , Correspondence Envelopes (V2) (Q4) , Laminating Pouch (Q4) , Poker or AWL as per IS 10375 (Q4) , knife blades (Q4) , Flexible transparent sheet (Q3) , Glue Stick (V2) (Q4) , Binder Clips (V2) (Q3) , Staplers (V2) (Q3) , Stapler Pin / Staples (V2) (Q4) , Colour Pencil (V2) (Q4) , Stamp - Pad Ink as per IS 393 (Q4) , Cartridge (Drawing) Paper as per IS 1848 (Part 2) (Q4) , Tags for Files (V2) as per IS 8499 (Q4) , Pins, Paper, Straight as per IS 5653 (Q4) , self adhesive paper note (Q4)

Southern Railway - SR Tender

Goods
Machinery and Tools
Ireps
Erode, Tamil Nadu
Closing Date20 Jan 2025
Tender Amount₹ 5 Lac 
This is an estimated amount, exact amount may vary.
Description: Set Of Hex Head Bolt With Castle Nut, Spring Washer & Split Pin To Size M20 X 90mm & M20 X 80 mm Long, Thread Length 52 Mm To Be Procured As Per Is:1364(pt.1)/02 P 8.8 With A Provision Of through Hole To Suit 3.2 Mm Dia Split Pin At A Center Distance 8 Mm From The Threaded End, Qty - 01 No. Each/set. (i)bolt-is:1364/2002 P8.8., (ii) Castle Nut Is:2232,(iii) Spring Washer Is:3063, (iv) split Pin Is:549. Drawing Of Bolt Should Confirm To Rdso's Drg. No. Skel- 4512 Alt.-nil (ref.46,47,48,49).

Rail Coach Factory - RCF Tender

Goods
Ireps
Kapurthala, Punjab
Closing Date6 Feb 2025
Tender Amount₹ 1 Cr 
This is an estimated amount, exact amount may vary.
Description: Description :set Of High Tensile Hardwares For Fiat Bogies (each Item In The Set To Be packed Individually, Before Final Packing All Items Of Set In A Box), As Per Drawing: mplfiaththw Version 3, Packing Instruction: Set Of High Tensile Hardwares For Fiat Bogies:- size-wise Hardwares Should Be Packed Suitably To Avoid Thread Damage, In Bio-degrade able Polythene Packet, Clearly Mentioning The Nomenclature Of Hardware. Then Collec tivelly Packed In Card Board Box Of Sufficent Strength, Further Tied With Suitable No. of Nylon Strips. A Well Protected List Should Be Pasted On Box Bearing Purchase Order no, Pl No., Description, Qty, Firm's Name & Address, Date Of Despatch Etc. The Transit Da mange If Any Shall Be At The Cost Of Supplier. [ Warranty Period: 30 Months After The Date Of delivery ] ]

South Western Railway - SWR Tender

Goods
Furnitures and Fixtures
Ireps
Mandya, Karnataka
Closing Date20 Jan 2025
Tender Amount₹ 35.4 Lac 
This is an estimated amount, exact amount may vary.
Description: Design, Supply And Installation Of Following Items As Per Drawing And Specification Attached. Item No. 1) Selective Pallet Racking System Of Dimensions 4190 Mm W X 3000 Mm H X 1000 Mm D , G+3 Levels With 4 Bend Decking Panels , Load Carrying Capacity Of 2500 Kgs Per Level , Load Carrying Capacity Per Pallet: 840 Kgs Udl,along With Safety Members Pallet Stoppers, Row Guards, Column Guards And Necessary Stability Members . ( Qty 14 No ) . Item No. 2)corrugated Metal Pallets Of Dimension 1200 Mm W X 1200 Mm D X 130 Mm H With Racking Load Carrying Capacity Of 1000 Kgs Udl - ( Qty - 168 Nos ) Make : Godrej,nilkamal,josts Or Similar

Bharat Sanchar Nigam Limited - BSNL Tender

Goods
Electrical Goods and Equipments...+1Electrical and Electronics
GEM
Corrigendum : Corrigendum Added
Jodhpur, Rajasthan
Closing Date20 Jan 2025
Tender Amount₹ 3.2 Lac 
Description: CATEGORY: Replacement of 5 Amp Piano Type switch , Replacement of 2 way 5 or 6 A switch , Replacement of 3 Pin 5 Amp Socket outlet , Replacement of 15 or 16 Amp Switch , Replacement of 3 or 6 pin15 or 16 Amp Socket outlet , Replacement of Fan step regulator , Replacement of Fan capacitor , Replacement of 63A HRC Fuse , Replacement of 125A HRC Fuse , Replacement of 3mm thick Phenolic Laminated Sheet , Supplying and fixing metal bob of size 180 mm X 100 mm X 60 mm deep , Supplying and fixing metal bob of size 200 mm X 250 mm X 60 mm deep , Supplying and drawing of 3x1.5sqmm wire , Supplying and drawing of 3x2.5sqmm wire , Supplying and drawing of 3x4 sqmm wire , Supplying and fixing of single pole MCB , Supplying and fixing of single pole and Neutral MCB , Rewinding up to 1400 mm size ceiling fan , Rewinding up to exhaust fan or wall mounting fan , Supplying and fixing of 1400 mm size ceiling fan , Supplying and fixing of 300 mm size heavy duty exhaust fan , Making opening for exhaust fan , Supplying and fixing of 18 or 20 watt LED light fixture , Supplying and fixing of MCB distribution board , Supplying and fixing of PVC casing caping , Supplying and fixing of 24 watt LED compound light , Supplying and fixing of compound light box , Supplying and fixing of GI bracket , Supplying and fixing of 2x6 sqmm cable , Supplying and fixing of 3.5x35 sqmm cable , Supplying and fixing of 3.5x95 sqmm cable , Supplying and making end termination for 2x6 sqmm cable , Supplying and making end termination for 3.5x35 sqmm cable , Supplying and making end termination for 3.5x95 sqmm cable , Supplying and fixing of 35mm X 35mm X 5mm Angle iron , Supplying and fixing of 25mm X 25mm X 3mm Angle iron , Supplying and fixing of 25mm X 3mm MS flat , Supplying and fixing of 1cm X 1cm squre MS wire mesh of 3mm thick wire , Supplying and fixing of 16SWG MS Sheet , Supplying and fixing of 6mm thich Bakelite Sheet , ITC of existing power panel , SITC of 100 Amp TPN Switch disconnector Fuse Unit , ITC of existing cable tray , SITC of DOL starter

Public Works Building And NH Department Tender

Services
Consultancy Services...+1Civil And Architectural Services
Eprocure
Cachar, Assam
Closing Date8 Jan 2025
Tender Amount₹ 42.7 Lac 
Details: Consultancy Service Such As Drawing Of Floor Plan , Site Plan, Structural Drawing Of Pilling, Column, Grade Beam, Roof Beam , Roof Slab Etc.

Indian Army Tender

Goods
Furnitures and Fixtures
GEM
Corrigendum : Corrigendum Added
Bharatpur, Rajasthan
Closing Date3 Jan 2025
Tender Amount₹ 8.3 Lac 
This is an estimated amount, exact amount may vary.
Description: CATEGORY: Wood screws (Q3) , Chandras for Polish , French Polish , Cotton Newar , Nylone Newar , Fevicol SH , Handle for Almirah , Knobs fancy SS , Lock for Almirah , Sand Paper Grit No 20 , Sand Paper Grit No 60 , Machine screw steel , Machine Screw 25 mm , Machine Screw 35 mm , Teak Wood Beading 18mm , Teak Wood Beading 12mm , Teak wood beading 50mm , Teak wood beading 19mm , Decorative beading , Window hanlde left , Window hanlde right , Window glass panes 4 x 4 x 3mm , Window glass panes 4 x 4 x 4mm , 5 mm hard glass for aluminium door black size 4ft x4ft , Frostel glass 4 mm , Window glass pin headed panes 4 x 4 foot x 4mm , Lakh Dana for Polish , Oil putty , Brass pegs of size 4 inch , PVC Seat for chairs , Taflon tape , Tapestry Cover for foam Cushion stitched in size 22 inches x 21 inches x 4inches , Cushion foam with tapestry cover of size 22 inches long x 21 inches wide x 4 inches thick , Sunmica of 0.8 mm thick , Wood Primer , PU Polish , Telescopic Hinges , Wall hanger , Handle CP 4 inches , Handle CP 5 inches , PVC Shoe for 25mm dia pipe , PVC Shoe for 20mm dia pipe , PVC shoe for 25 Sqmm pipe , PVC shoe of 32 mm square pipe , PVC buffer Shoe for 25mm white , PVC buffer Shoe for 35mm white , PVC buffer Shoe for 50mm white , Malmal cloth , Wheel coaster for executive chair , Looking Mirror for Table Dessing Ladies , Telescopic channel 14 inches , Telescopic channel 12 inches , Touch wood , Sabna Colour , Magnetic Catcher , Drawer Lock , Emery Paper size 60 80 , Emery Paper size 220 320 , Nails wire GI 25mm , Nails wire GI 35mm , Nails wire GI 40mm , Nails wire GI 50mm , Nails wire GI 75mm , Pasting Tape for Sunmica , Panel pin
2331-2340 of 3005 archived Tenders