Drawer Tenders
Drawer Tenders
Power And Non Conventional Energy Sources Department Tender
Goods
Publishing and Printing
GEM
North 24 Parganas, West Bengal
Description: CATEGORY: Plain Copier Paper (V3) ISI Marked to IS 14490 (Q4) , Air
Freshener Liquid (V2) (Q3) , Air Freshener Solid and Gel (Q4)
, Lever Arch File (Q4) , conference folder (Q4) , scissors (Q4)
, Glue Stick (V2) (Q4) , Gel Pen (V3) (Q4) , Drawing Pins (V2)
as per IS 5205 (Q4) , Paper Adhesive, Liquid Gum and Office
Paste Type as per IS 2257 (Rev) (Q3) , mosquito repellant
cream spray and lotion (Q4) , Tissue Papers (V2) (Q4) , Desk
Pads - Writing (V2) (Q4) , Staplers (V2) (Q3) , paper or
eyelet punches (Q4)
Closing Date7 Feb 2025
Tender AmountRefer Documents
Western Railway - WR Tender
Goods
Electrical Goods and Equipments...+1Electrical and Electronics
Ireps
Ratlam, Madhya Pradesh
Description: 603201268635
of 110v, 120ah,vrla Battery Set With 19 Monoblock (6v Each) Pre Charged With In
tercell Connectors Without M.s. Casing., As Per Drawing/specification : Rdso/pe/spec/ac/0009
- 2014(rev-2) W/o Ms Casing(cradle). Set Of120 Ah Vrla Batteries Consisting Of 19 Monoblocks
of 6v, 120 Ah Battery, Supply With Stack Box Along With Accessories Conforming To Rdso Spe
cification No. Rdso/pe/spec/ac/0009-2014(rev). Make: Amara Raja, Hbl Or Exide Only ]
section Engineer Madhya Pradesh 3.00 Set
consignee (electrical Refg. & A/c)
ratlam, Wr
uvam Item Ref. ( Item Id :- 2400048 - 120 Ah Vrla Battery )
inspection Details Stage Inspection Not Required
Closing Date6 Feb 2025
Tender Amount₹ 5 Lac
This is an estimated amount, exact amount may vary.
Goa Shipyard Limited - GSL Tender
Goods
Machinery and Tools
GEM
Corrigendum : Closing Date Modified
South Goa, Goa
Description: CATEGORY: MD HP breathing air compressor 9 CFM , Air dryer ,
Combined Started or Control Panel , Gauge Assembly board
with suction and discharge pressure gauge, pipes, isolation
cocks etc. , Loose fittings and instrumentation as applicable
, Shock mounts with center and side holding down fasteners
, Flexible pipes bellows for all equipment interface with
external loose supplied system , Electrical items for
connectorisation, termination i.e. lugs, gland etc. , First
submission of binding drawing , Documentation hard copy ,
Documentation soft copy , IETM documentation , Service of
service engineer for STW Commissioning trail CST etc ,
Service of service engineer for electrical work, pre checks,
cable connection, instrumentation etc , Preservation and de
preservatives , Commissioning spares , Onboard spares ,
Standard and Special Tools , Training and Training material
Closing Date5 Feb 2025
Tender AmountRefer Documents
Southern Railway - SR Tender
Goods
Machinery and Tools
Ireps
Erode, Tamil Nadu
Description: Set Of Hex Head Bolt With Castle Nut, Spring Washer & Split Pin To Size M20 X 90mm & M20 X 80
mm Long, Thread Length 52 Mm To Be Procured As Per Is:1364(pt.1)/02 P 8.8 With A Provision Of
through Hole To Suit 3.2 Mm Dia Split Pin At A Center Distance 8 Mm From The Threaded End, Qty -
01 No. Each/set. (i)bolt-is:1364/2002 P8.8., (ii) Castle Nut Is:2232,(iii) Spring Washer Is:3063, (iv)
split Pin Is:549. Drawing Of Bolt Should Confirm To Rdso's Drg. No. Skel- 4512 Alt.-nil
(ref.46,47,48,49).
Closing Date20 Jan 2025
Tender Amount₹ 5 Lac
This is an estimated amount, exact amount may vary.
Indian Army Tender
Goods
Publishing and Printing
GEM
Corrigendum : Closing Date Modified
Dibrugarh, Assam
Description: CATEGORY: Register (V2) (Q4) , Correspondence Envelopes (V2) (Q4) ,
Laminating Pouch (Q4) , Poker or AWL as per IS 10375 (Q4)
, knife blades (Q4) , Flexible transparent sheet (Q3) , Glue
Stick (V2) (Q4) , Binder Clips (V2) (Q3) , Staplers (V2) (Q3) ,
Stapler Pin / Staples (V2) (Q4) , Colour Pencil (V2) (Q4) ,
Stamp - Pad Ink as per IS 393 (Q4) , Cartridge (Drawing)
Paper as per IS 1848 (Part 2) (Q4) , Tags for Files (V2) as per
IS 8499 (Q4) , Pins, Paper, Straight as per IS 5653 (Q4) , self
adhesive paper note (Q4)
Closing Date20 Jan 2025
Tender AmountRefer Documents
Rail Coach Factory - RCF Tender
Goods
Ireps
Kapurthala, Punjab
Description: Description :set Of High Tensile Hardwares For Fiat Bogies (each Item In The Set To Be
packed Individually, Before Final Packing All Items Of Set In A Box), As Per Drawing:
mplfiaththw Version 3, Packing Instruction: Set Of High Tensile Hardwares For Fiat Bogies:-
size-wise Hardwares Should Be Packed Suitably To Avoid Thread Damage, In Bio-degrade
able Polythene Packet, Clearly Mentioning The Nomenclature Of Hardware. Then Collec
tivelly Packed In Card Board Box Of Sufficent Strength, Further Tied With Suitable No.
of Nylon Strips. A Well Protected List Should Be Pasted On Box Bearing Purchase Order
no, Pl No., Description, Qty, Firm's Name & Address, Date Of Despatch Etc. The Transit Da
mange If Any Shall Be At The Cost Of Supplier. [ Warranty Period: 30 Months After The Date Of
delivery ] ]
Closing Date6 Feb 2025
Tender Amount₹ 1 Cr
This is an estimated amount, exact amount may vary.
South Western Railway - SWR Tender
Goods
Furnitures and Fixtures
Ireps
Mandya, Karnataka
Description: Design, Supply And Installation Of Following Items As Per Drawing And Specification Attached. Item No. 1) Selective Pallet Racking System Of Dimensions 4190 Mm W X 3000 Mm H X 1000 Mm D , G+3 Levels With 4 Bend Decking Panels , Load Carrying Capacity Of 2500 Kgs Per Level , Load Carrying Capacity Per Pallet: 840 Kgs Udl,along With Safety Members Pallet Stoppers, Row Guards, Column Guards And Necessary Stability Members . ( Qty 14 No ) . Item No. 2)corrugated Metal Pallets Of Dimension 1200 Mm W X 1200 Mm D X 130 Mm H With Racking Load Carrying Capacity Of 1000 Kgs Udl - ( Qty - 168 Nos ) Make : Godrej,nilkamal,josts Or Similar
Closing Date20 Jan 2025
Tender Amount₹ 35.4 Lac
This is an estimated amount, exact amount may vary.
Bharat Sanchar Nigam Limited - BSNL Tender
Goods
Electrical Goods and Equipments...+1Electrical and Electronics
GEM
Corrigendum : Corrigendum Added
Jodhpur, Rajasthan
Description: CATEGORY: Replacement of 5 Amp Piano Type switch , Replacement of 2
way 5 or 6 A switch , Replacement of 3 Pin 5 Amp Socket
outlet , Replacement of 15 or 16 Amp Switch , Replacement
of 3 or 6 pin15 or 16 Amp Socket outlet , Replacement of
Fan step regulator , Replacement of Fan capacitor ,
Replacement of 63A HRC Fuse , Replacement of 125A HRC
Fuse , Replacement of 3mm thick Phenolic Laminated Sheet
, Supplying and fixing metal bob of size 180 mm X 100 mm
X 60 mm deep , Supplying and fixing metal bob of size 200
mm X 250 mm X 60 mm deep , Supplying and drawing of
3x1.5sqmm wire , Supplying and drawing of 3x2.5sqmm
wire , Supplying and drawing of 3x4 sqmm wire , Supplying
and fixing of single pole MCB , Supplying and fixing of single
pole and Neutral MCB , Rewinding up to 1400 mm size
ceiling fan , Rewinding up to exhaust fan or wall mounting
fan , Supplying and fixing of 1400 mm size ceiling fan ,
Supplying and fixing of 300 mm size heavy duty exhaust fan
, Making opening for exhaust fan , Supplying and fixing of
18 or 20 watt LED light fixture , Supplying and fixing of MCB
distribution board , Supplying and fixing of PVC casing
caping , Supplying and fixing of 24 watt LED compound light
, Supplying and fixing of compound light box , Supplying and
fixing of GI bracket , Supplying and fixing of 2x6 sqmm
cable , Supplying and fixing of 3.5x35 sqmm cable ,
Supplying and fixing of 3.5x95 sqmm cable , Supplying and
making end termination for 2x6 sqmm cable , Supplying and
making end termination for 3.5x35 sqmm cable , Supplying
and making end termination for 3.5x95 sqmm cable ,
Supplying and fixing of 35mm X 35mm X 5mm Angle iron ,
Supplying and fixing of 25mm X 25mm X 3mm Angle iron ,
Supplying and fixing of 25mm X 3mm MS flat , Supplying
and fixing of 1cm X 1cm squre MS wire mesh of 3mm thick
wire , Supplying and fixing of 16SWG MS Sheet , Supplying
and fixing of 6mm thich Bakelite Sheet , ITC of existing
power panel , SITC of 100 Amp TPN Switch disconnector
Fuse Unit , ITC of existing cable tray , SITC of DOL starter
Closing Date20 Jan 2025
Tender Amount₹ 3.2 Lac
Public Works Building And NH Department Tender
Services
Consultancy Services...+1Civil And Architectural Services
Eprocure
Cachar, Assam
Details: Consultancy Service Such As Drawing Of Floor Plan , Site Plan, Structural Drawing Of Pilling, Column, Grade Beam, Roof Beam , Roof Slab Etc.
Closing Date8 Jan 2025
Tender Amount₹ 42.7 Lac
Indian Army Tender
Goods
Furnitures and Fixtures
GEM
Corrigendum : Corrigendum Added
Bharatpur, Rajasthan
Description: CATEGORY: Wood screws (Q3) , Chandras for Polish , French Polish ,
Cotton Newar , Nylone Newar , Fevicol SH , Handle for
Almirah , Knobs fancy SS , Lock for Almirah , Sand Paper Grit
No 20 , Sand Paper Grit No 60 , Machine screw steel ,
Machine Screw 25 mm , Machine Screw 35 mm , Teak Wood
Beading 18mm , Teak Wood Beading 12mm , Teak wood
beading 50mm , Teak wood beading 19mm , Decorative
beading , Window hanlde left , Window hanlde right ,
Window glass panes 4 x 4 x 3mm , Window glass panes 4 x
4 x 4mm , 5 mm hard glass for aluminium door black size
4ft x4ft , Frostel glass 4 mm , Window glass pin headed
panes 4 x 4 foot x 4mm , Lakh Dana for Polish , Oil putty ,
Brass pegs of size 4 inch , PVC Seat for chairs , Taflon tape ,
Tapestry Cover for foam Cushion stitched in size 22 inches x
21 inches x 4inches , Cushion foam with tapestry cover of
size 22 inches long x 21 inches wide x 4 inches thick ,
Sunmica of 0.8 mm thick , Wood Primer , PU Polish ,
Telescopic Hinges , Wall hanger , Handle CP 4 inches ,
Handle CP 5 inches , PVC Shoe for 25mm dia pipe , PVC
Shoe for 20mm dia pipe , PVC shoe for 25 Sqmm pipe , PVC
shoe of 32 mm square pipe , PVC buffer Shoe for 25mm
white , PVC buffer Shoe for 35mm white , PVC buffer Shoe
for 50mm white , Malmal cloth , Wheel coaster for executive
chair , Looking Mirror for Table Dessing Ladies , Telescopic
channel 14 inches , Telescopic channel 12 inches , Touch
wood , Sabna Colour , Magnetic Catcher , Drawer Lock ,
Emery Paper size 60 80 , Emery Paper size 220 320 , Nails
wire GI 25mm , Nails wire GI 35mm , Nails wire GI 40mm ,
Nails wire GI 50mm , Nails wire GI 75mm , Pasting Tape for
Sunmica , Panel pin
Closing Date3 Jan 2025
Tender Amount₹ 8.3 Lac
This is an estimated amount, exact amount may vary.
2331-2340 of 3005 archived Tenders