Drawer Tenders

Details: Supply Of One Rake Set Of Seats Without Seat Fixing Profile For Trainset -18 As Per Specification Icf/md/spec-367 Rev-02 For Mc,tc,dtc,dtc2,ndtc Coaches & Icf/md/spe C-366 Rev-03 For Ndtc/ec & Ndtc/ec2 Coaches., As Per Drawing: Mplseatsts18 Version 6, Pack Ing Instruction: Chair Car Seat( Ac & Nac ) : I. All Protruding Portions Of The Chair Car Seat Should Be Protected With Plastic Cover. 2.then Complete Seat And Its Corners / Hand Re St/ Foot Rest Should Be Properly Wrapped With Biodegradable Air Bubble Sheet Of Thick Ness 30 Micron And Bubble Diameter 10mm. 3. The Full Seat Should Be Further Wrapped W Ith 3 Ply Corrugated Paper Sheet. 4. Each Individual Chair Should Be Covered All Aroun D With Transparent, Plain, Biodegradable, Polythene Sheet To Prevent Ingress Of Dust/ Water. 5. The Seat Bottom Frame Portion Should Be Fitted With M.s Supports For Its Bala Ncing, So That The Chair Can Rest On The Floor Without Tilting On Any Side. 6. The Overa Ll Packing Should Be Such That It Is Not Damaged During Transportation Of The Materia L, The Seats Should Be Tied Up In Pairs Only. 7. All Hardware/accessories/loose Items In O Ne Coach Set Should Be Separately Packed In Wooden Box Having Sufficient Strength. 8. A List Should Be Pasted On Each Box Showing Purchase Order No., Pl No., Description Of I Tem, Drg. No., Quantity, Firm Name, Address & Date Of Dispatch And Its Contents. Note : Q R Code Is To Be Affixed " Near Manufacturer Name Plate On Each Seat " On Top Of Packed Seat As Per Pi Mentioned Above " On Top Of Wooden Box For Sr.no.7 Qr Code Having Detai Ls As Listed Below : 1 Name Of The Manufacturer 2 Purchase Order Number 3 Purchase Order Date 4 Unique Serial Number (or Lot Number For Bulk I Tems) Of The Manufacturer Or 5 Date Of Manufacture 6 Delivery Challan No. 7 Delivery Challan Date The Qr C Ode Shall Be As Per Iso/iec18004 Model2 And The Data Shall Be Available As Xml Using Th E Tags Detailed Above. Incase The Above Details Are Not Available, Or The Qr Codes Are Not Readable, The Supplied Material Is Liable To Be Rejected. [ Warranty Period: 84 Months After The Date Of Delivery ]

Details: i) Geo-Technical & Hydro- geological Sub Surface Investigation, Surveying, Planning, Designing, Construction & commissioning of atleast. 5.0 meter dia. & required depth Radial Collector well with 250 mm dia & 300 mtr.(approx) long Infiltration Gallery with laying of LCG strainer pipe of minimum 8 mm thick including sub surface dyke to harvest 4.24 MLD raw water with 16 hours designing operation along with Pump House, Access & Pipe carrying Bridge at Subarnarekha along with 01(one) LT Station room for termination of WBSEDCL power source at vicinity of High Bank at Subarnarekha River (Kerwari), protection work at river bank, including construction of Pipe carrying Bridge with necessary Civil, Electrical (according to I.E. rules), Mechanical & all other allied works all complete. After satisfactory completion and commissioning, 3 (three) months trial run, necessary training of maintenance staff & thereafter (subsequently) 5 (five) years operation and maintenance with security /guarding arrangement and (ii)Laying of raw water rising main from intake well to CWR(D.I./K9 Pipes All types and Class) with all necessary fittings & valves for raw water rising main work, temporary road restoration works for vehicular movement and pillar carrying pipe line and Jack Pushing works for raw and clear water rising main work all complete and (iii)Construction of R.C.C Over Head Reservoirs(OHR) of 1000 cum & 600 cum capacity with 20 m Staging height per approved departmental design, drawing & Specification etc at zone – A & Zone – B including land development , approach road, internal drainage, boundary wall and Sal Bullah Piling etc and pipe line work and connection to the Distribution and inlet line all complete (iv) Surveying , Geo-Technical Investigation, Planning, Designing, Construction & Commissioning of 770 Cum. capacity Clear Water Reservoir with Pumping station, with Construction of weir with minimum 400 cum capacity sedimentation tank and Slow sand filter of area 1000 Sqm minimum, Chlorination treatment unit, ,land development ,approach road, internal drainage, and boundary wall including Electro- Mechanical works at Jhalda and all other allied works all complete. After satisfactory completion and commissioning, 3 (three) months trial run, necessary training of maintenance staff & thereafter (subsequently) 5 (five) years operation and maintenance with security /guarding arrangement within Jhalda Municipality under AMRUT 2.0 Project.

Details: SET OF SEATS FOR L.H.B GS AMRIT BHARAT COACHES. FOLLOW CUSHIONING MATERIAL EITHER PU FOAM TO RDSO SPEC. RDSO/2007/CG-04 REV. 01 OR SILICON FOAM TO RDSO SPEC.RSDO/ 2013/CG-13 REV. 01 WITH FIRE PROPERTIES COMPLIANT TO R21 HL-3 OF EN45545 STANDARD AND U PHOLSTERY TO RDSO SPEC.RDSO/2008/CG-07 REV-NIL WITH AMENDMENT SLIP NO-5 WITH CORRIGEN DUM 1 OF MAY 2015. COLOUR SHADE TO BE FOLLOWED AS PER DESIGN LNO.MD46271 DATED 30.09. 24, as per Drawing: MPLSLSDD VERSION 1, Packing Instruction: ALL PROTRUDING PORTIONS OF SEAT/ BERTH SHOULD BE PROTECTED WITH ENVIRONMENT FRIENDLY PRE MOULDED THERMOCOL CAP OF R EQUISITE STRENGTH OR SILICON RUBBER CAP AS AN ALTERNATE OPTION. EACH INDIVIDUAL SEAT/BE RTH SHOULD BE COVERED WITH BIODEGRADABLE BUBBLE SHEET OF DIAMETER 10MM AND THICKNES S 30 MICRON ALL ROUND. FLAP OF BERTH SHOULD BE OUTSIDE THE BUBBLE SHEET PACKING LEAVIN G SEAT & BERTH MOUNTING UNCOVERED. THEN IT SHOULD BE WRAPPED ALL ROUND IN THICK LAMIN ATED JUTE FABRIC OF SUFFICIENT STRENGTH. THE ASSEMBLY SHOULD BE TIED WITH NYLON STRIPS. I T IS FURTHER WRAPPED WITH BIODEGRADABLE POLYTHENE ALL ROUND TO PREVENT INGRESS OF DU ST/WATER. FOR THE FOLLOWING ITEMS (IF COVERED UNDER S&B SET) THE ITEM-WISE PI (LATEST VER .) WILL BE AS UNDER : 1. CHAIR ANGLES, EXPANDED METAL PARTITION FRAME,SUSPENSION STRAPS, SUPPORTS AND MTG. BKT PI004 2. HARDWARE ITEMS PI019 3. ITEMS LIKE BEARING BKT, CHAIN BKT, C ATCH ARGGT, HINGE BKT AND SLEEVES ETC. PI020 4. LADDERS PI031, LUGGAGE RACKS PI042 A LIST SHOULD BE PASTED ON EACH BOX SHOWING PO NO, PL NO, DESCRIPTION, DRG NO, QTY, FIRM NAME & ADDRESS, DATE OF DISPATCH ETC NOTE : FIRMS HAVE OPTION TO PROVIDE QR CODE . THE ITEM S HELL CARRY A QR CODE ON CARDBOARD BOX NEAR THE MANUFACTURER NAME STICKER CONTAININ G THE DETAILS AS LISTED BELOW: " NAME OF THE MANUFACTURER " PURCHASE ORD ER NUMBER " PURCHASE ORDER DATE " UNIQUE SERIAL NUMBER (OR LOT NUMBE R FOR BULK ITEMS) OF THE MANUFACTURER OR " DATE OF MANUFACTUR E " DELIVERY CHALLAN NO. " DELIVERY CHALLAN DATE THE QR CODE SHALL BE AS PER ISO/IEC18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XM L USING THE TAGS DETAILED ABOVE